The Ultra-Stable Magnet of the Mark II Experiment (p. 602405) |
by Tommasini, D |
Integration of the 11-T Nb$_{3}$Sn Dipoles and Collimators in the LHC (p. 3800105) |
by Ramos, Délio |
Development of MQXF: The Nb$_{3}$Sn Low-$\beta$ Quadrupole for the HiLumi LHC (p. 4000207) |
by Ferracin, P |
CLIQ-Based Quench Protection of a Chain of High-Field Superconducting Magnets (p. 4000305) |
by Ravaioli, E |
First Implementation of the CLIQ Quench Protection System on a 14-m-Long Full-Scale LHC Dipole Magnet (p. 4000505) |
by Ravaioli, E |
Retraining of the 1232 Main Dipole Magnets in the LHC (p. 4000705) |
by Verweij, A |
Fabrication and Analysis of 150 mm Aperture Nb$_{3}$Sn LARP MQXF Coils (p. 4000907) |
by Holik, E F |
Development of a 15 T Nb$_3$Sn Accelerator Dipole Demonstrator at Fermilab (p. 4001007) |
by Novitski, I |
Second Generation Coil Design of the Nb$_{3}$Sn low-beta Quadrupole for the High Luminosity LHC (p. 4001105) |
by Izquierdo Bermudez, S |
The Design of Superconducting Separation Dipoles D2 for the High Luminosity Upgrade of LHC (p. 4001504) |
by Farinon, S |
Measurements and Analysis of Dynamic Effects in the LARP Model Quadrupole HQ02b During Rapid Discharge (p. 4001605) |
by Sorbi, Massimo |
Assembly Tests of the First Nb$_{3}$Sn Low-Beta Quadrupole Short Model for the Hi-Lumi LHC (p. 4001705) |
by Pan, H |
Quench Protection Study of the Updated MQXF for the LHC Luminosity Upgrade (HiLumi LHC) (p. 4001805) |
by Marinozzi, Vittorio |
Development of a 200-mm Short Model of Beam Separation Dipole for HL-LHC Upgrade (p. 4001905) |
by Enomoto, S |
Development Status of a 2-m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade (p. 4002606) |
by Sugano, M |
Consolidation of the LHC Superconducting Magnets and Circuits (p. 4002706) |
by Tock, J Ph |
Electromechanical Analysis of the Busbar Support System in the LHC Electrical Feed Boxes and Their Consolidation With Remotely Installed Clamps (p. 4002904) |
by Lees, Andrew |
Layout Study for the Dipole Magnets of the Future Circular Collider Using Nb-Ti and Nb$_{3}$Sn (p. 4003206) |
by van Nugteren, J |
Protection Heater Design Validation for the LARP Magnets Using Thermal Imaging (p. 4003605) |
by Marchevsky, M |
Magnetic Measurements and Analysis of the First 11-T Nb$_{3}$Sn Dipole Models Developed at CERN for HL-LHC (p. 4003805) |
by Fiscarelli, L |
Persistent-Current Magnetization Effects in High-Field Superconducting Accelerator Magnets (p. 4003905) |
by Izquierdo Bermudez, S |
LHC Normal Conducting Magnets Toward HL-LHC and Beyond: Life Span Evaluations, Corrective Actions, and Future Upgrades (p. 4004005) |
by Fessia, P |
Analysis of Temperature Uniformity During Heat Treatment of Nb$_{3}$Sn Coils for the High-Luminosity LHC Superconducting Magnets (p. 4004205) |
by Lackner, F |
Development of the Superferric Sextupole Corrector Magnet for the LHC Luminosity Upgrade (p. 4004804) |
by Volpini, G |
16 T Nb$_{3}$Sn Racetrack Model Coil Test Result (p. 4004906) |
by Perez, J C |
Test Results of the LARP Nb$_3$Sn Quadrupole HQ03a (p. 4005105) |
by DiMarco, J |
The 11 T Dipole for HL-LHC: Status and Plan (p. 4005305) |
by Savary, F |
Mechanical Qualification of the Support Structure for MQXF, the Nb$_{3}$Sn Low-Beta; Quadrupole for the High Luminosity LHC (p. 4005506) |
by Juchno, M |
Cold Powering Tests of 11-T Nb$_{3}$Sn Dipole Models for LHC Upgrades at CERN (p. 4005604) |
by Willering, G |
The Magnetic Model of the LHC at 6.5 TeV (p. 4005707) |
by Todesco, E |
Design of Nb$_{3}$Sn Wiggler Magnets for the Compact Linear Collider and Manufacturing of a Five-Coil Prototype (p. 4100506) |
by Fajardo, L García |
Use of Permanent Magnets in Multiple Projects at CERN (p. 4101404) |
by Thonet, P A |
Magnetic and Mechanical Design of the Nested Orbit Correctors for HL-LHC (p. 4102005) |
by García-Matos, Jesús A |
Test Results of the CLIC Damping Wiggler Prototype (p. 4102504) |
by Bragin, Alexey V |
Direct Drive and Eddy Current Septa Magnet Designs for CERN's PSB Extraction at 2 GeV (p. 4103205) |
by Szoke, Z |
Electromagnetic Study of a Round Coil Superferric Magnet (p. 4103505) |
by Volpini, Giovanni |
Starting Manufacture of the ITER Central Solenoid (p. 4203305) |
by Libeyre, P |
Testing of the Superconducting Magnets for the FAIR Project (p. 4401605) |
by Mierau, Anna |
Development of a Superconducting Magnet for a Compact Cyclotron for Radioisotope Production (p. 4402004) |
by Garcia-Tabares, Luis |
Quench Protection of Very Large, 50-GJ-Class, and High-Temperature-Superconductor-Based Detector Magnets (p. 4500608) |
by Mentink, Matthias |
Status of the EuCARD 5.4-T REBCO Dipole Magnet (p. 4602605) |
by Borgnolutti, F |
Quench protection studies of the 11-T Nb$_{3}$Sn dipole for LHC upgrades (p. 4701605) |
by Izquierdo Bermudez, Susana |
Preliminary Conductor Layouts for the Detector Magnets of the Future Circular Collider (p. 4802305) |
by Berriaud, C |
Dimensional Changes of Nb$_{3}$Sn Rutherford Cables During Heat Treatment (p. 4802605) |
by Rochepault, E |
Geometrical Behavior of Nb$_{3}$Sn Rutherford Cables During Heat Treatment (p. 4802705) |
by Durante, Maria |
Design and Manufacturing of a 45 kA at 10 T REBCO-CORC Cable-in-Conduit Conductor for Large-Scale Magnets (p. 4803605) |
by Mulder, Tim |
Performance Test of an 8 kA @ 10-T 4.2-K ReBCO-CORC Cable (p. 4803705) |
by Mulder, Tim |
Quality Assurance of the 13-kA Superconducting Magnet Circuits Consolidation of the LHC at CERN (p. 4804205) |
by Principe, R |
Nb$_3$Sn RRP Strand and Rutherford Cable Development for a 15 T Dipole Demonstrator (p. 4804305) |
by Barzi, E. |
Physical Properties of a High-Strength Austenitic Stainless Steel for the Precompression Structure of the ITER Central Solenoid (p. 7000104) |
by Sgobba, Stefano |
A High Precision 3D Magnetic Field Scanner for Small to Medium Size Magnets (p. 9000204) |
by Bergsma, F |
Advances in Fiber Optic Sensors Technology Development for temperature and strain measurements in Superconducting magnets and devices (p. 9000705) |
by Chiuchiolo, A. |
New Analysis Framework Software for the CERN Superconducting Magnet Test Facility (p. 9500905) |
by Gomez de la Cruz, M F |
Quench Protection of a 16-T Block-Coil Dipole Magnet for a 100-TeV Hadron Collider Using CLIQ (p. 15795444) |
by Ravaioli, E |
Results of the Testing of ITER CC HTS Current Lead Prototypes (p. 15977063) |
by Ding, K |