Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
skip to main content
10.5555/2133429.2133534acmconferencesArticle/Chapter ViewAbstractPublication PagesiccadConference Proceedingsconference-collections
research-article

Design and manufacturing of organic RFID circuits: coping with intrinsic parameter variations in organic devices by circuit design

Published: 07 November 2010 Publication History

Abstract

A detailed study of device characteristics and parameter variations of organic transistors on foil leads to the conclusion that design of p-type only digital circuits needs to focus on optimal yield, rather than on speed. From this perspective, subsequent generations of organic RFID tags have been realized, by increasing complexity (from 64 bit to 128 bit code generators), by adding functionality (Manchester encoding, anti-collision protocols), and by increasing data rate of the generated ID code (from 752 bits per second towards 50 kbit per second). As such, each of the requirements towards EPC compatible organic RFID tags is shown independently in code generators on foil, but not yet in a single RFID tag.

References

[1]
H. Sirringhaus, T. Kawase, R. H. Friend, T. Shimoda, M. Inbasekaran, W. Wu, E. P. Woo, "High-Resolution Inkjet Printing of All-Polymer Transistor Circuits", Science Vol. 290, pp.2123--2126, 2000.
[2]
E. Cantatore, et al., "A 13.56-MHz RFID System Based on Organic Transponders", IEEE J. Solid-State Circuits, vol. 42, no. 1, pp. 84--92, Jan. 2007
[3]
A. Ullmann, et al., "Polymer Multi-Bit RFID Transponder", International Conference on Organic Electronics (ICOE), Abstract 53, June 2007.
[4]
K. Myny, S. Steudel, P. Vicca, M. J. Beenhakkers, N. A. J. M. van Aerle, G. H. Gelinck, J. Genoe, W. Dehaene, and P. Heremans, "Plastic circuits and tags for 13.56 MHz radio-frequency communication", Solid State Electron, Vol. 53, No. 12, 2009, pp. 1220--1226
[5]
S. Steudel, K. Myny, V. Arkhipov, C. Deibel, S. De Vusser, J. Genoe and P. Heremans, "50 MHz rectifier based on an organic diode", Nature Materials 4, 597--600 (2005).
[6]
K. Myny, S. Steudel, P. Vicca, J. Genoe, and P. Heremans, "An integrated double half-wave organic Schottky diode rectifier on foil operating at 13.56 MHz", Applied Physics Letters, Vol. 93, 2008, p. 093305.
[7]
S. Steudel, K. Myny, P. Vicca, D. Cheyns, J. Genoe and P. Heremans, "Ultra-High frequency rectification using organic diodes", IEDM 2008 Technical Digest, pp 93, December 14--17, 2008, San Francisco, USA.
[8]
S. Steudel, S. De Vusser, S. De Jonge, D. Janssen, S. Verlaak, J. Genoe, and P. Heremans, "Influence of the dielectric roughness on the performance of pentacene transistors", Appl. Phys. Lett. 85, pp 4400 (2004).
[9]
I. Yakimets, D. MacKerron, P. Giesen, K. J. Kilmartin, M. Goorhuis, E. Meinders, W. A. MacDonald, "Polymer Substrates for Flexible Electronics: Achievements and Challenges", Advanced Materials Research 93--94, pp 5, 2010
[10]
S. De Vusser, J. Genoe and P. Heremans, "Influence of Transistor Parameters on the Noise Margin of Organic Digital Circuits", IEEE Transactions on Electron Devices, Vol. 53, No. 4, pp. 601--610, 2006.
[11]
K. Myny, S. Soeren, S. Smout, V. Peter, F. Furthner, B. van der Putten, A. K. Tripathi, G. H. Gelinck, J. Genoe, W. Dehaene, P. Heremans, "Organic RFID transponder chip with data rate compatible with electronic product coding ", Organic Electronics 11, pp. 1176 (2010)
[12]
S. De Vusser, S. Steudel, K. Myny, J. Genoe, and P. Heremans, "Low voltage complementary organic inverters", Appl. Phys. Lett. 88, 162116 (2006).
[13]
D. Bode, C. Rolin, S. Schols, M. Debucquoy, S. Steudel, G. H. Gelinck, J. Genoe, P. Heremans, "Noise-Margin Analysis for Organic Thin-Film Complementary Technology", IEEE Trans. Elec. Devs. ED-57, 201 (2010)
[14]
R. Blache, J. Krumm, and W. Fix, "Organic CMOS Circuits for RFID Applications", IEEE International Solid-State Circuits Conference - Digest of Technical Papers, pp. 208 (2009).

Recommendations

Comments

Information & Contributors

Information

Published In

cover image ACM Conferences
ICCAD '10: Proceedings of the International Conference on Computer-Aided Design
November 2010
863 pages
ISBN:9781424481927
  • General Chair:
  • Louis Scheffer,
  • Program Chairs:
  • Joel Phillips,
  • Alan J. Hu

Sponsors

Publisher

IEEE Press

Publication History

Published: 07 November 2010

Check for updates

Author Tags

  1. design for yield
  2. organic RFID code generators
  3. pentacene

Qualifiers

  • Research-article

Conference

ICCAD '10
Sponsor:

Acceptance Rates

Overall Acceptance Rate 457 of 1,762 submissions, 26%

Contributors

Other Metrics

Bibliometrics & Citations

Bibliometrics

Article Metrics

  • 0
    Total Citations
  • 79
    Total Downloads
  • Downloads (Last 12 months)2
  • Downloads (Last 6 weeks)1
Reflects downloads up to 25 Dec 2024

Other Metrics

Citations

View Options

Login options

View options

PDF

View or Download as a PDF file.

PDF

eReader

View online with eReader.

eReader

Media

Figures

Other

Tables

Share

Share

Share this Publication link

Share on social media