Efficient pretreatment is essential for economic conversion of lignocellulosic feedstocks into monosaccharides for biofuel production. To realize high sugar yields with low inhibitor concentrations, hot water or dilute acid pretreatment followed by disk milling is proposed. Corn stover at 20% solids was pretreated with hot water at 160-200°C for 4-8min with and without subsequent milling. Hot water pretreatment and disk milling acted synergistically to improve glucose and xylose yields by 89% and 134%, respectively, compared to hot water pretreatment alone. Hot water pretreated (180°C for 4min) and milled samples had the highest glucose and xylose yields among all hot water pretreated and milled samples, which were comparable to samples pretreated with 0.55% dilute acid at 160°C for 4min. However, samples pretreated with 1% dilute acid at 150°C for 4min and disk milled had the highest observed glucose (87.3%) and xylose yields (83.4%).
Keywords: Corn stover; Dilute acid pretreatment; Disk milling; Hot water pretreatment; Mechanical grinding.
Copyright © 2016. Published by Elsevier Ltd.