In this study, we investigated the effects of mineral admixtures on the autogenous healing of flexural mortar members through a chloride ion penetration test. The mineral admixtures used were ground granulated blast-furnace slag (GGBS), fly ash, silica fume (SF), clinker binder, and clinker sand. Through a four-point bending test, a crack of approximately 100 μm was induced at the bottom of the flexural mortar member, and the chloride ion penetration depth through the crack was measured to evaluate the self-healing performance. Additionally, we analyzed the correlation between the self-healing performances, which was measured through water flow and water absorption tests. The experimental results showed that the chloride ion penetration depth decreased due to crack healing, and the self-healing performance of the GGBS and SF was the highest. It was found that the subtle change in the self-healing performance was more accurately evaluated by the chloride ion penetration test.
Keywords: autogenous healing; chloride ion penetration test; flexural member; mineral admixture; water flow test.