-
Phasing segmented telescopes via deep learning methods: application to a deployable CubeSat
Authors:
Maxime Dumont,
Carlos M. Correia,
Jean-François Sauvage,
Noah Schwartz,
Morgan Gray,
Jaime Cardoso
Abstract:
Capturing high resolution imagery of the Earth's surface often calls for a telescope of considerable size, even from Low Earth Orbits (LEO). A large aperture often requires large and expensive platforms. For instance, achieving a resolution of 1m at visible wavelengths from LEO typically requires an aperture diameter of at least 30cm. Additionally, ensuring high revisit times often prompts the use…
▽ More
Capturing high resolution imagery of the Earth's surface often calls for a telescope of considerable size, even from Low Earth Orbits (LEO). A large aperture often requires large and expensive platforms. For instance, achieving a resolution of 1m at visible wavelengths from LEO typically requires an aperture diameter of at least 30cm. Additionally, ensuring high revisit times often prompts the use of multiple satellites. In light of these challenges, a small, segmented, deployable CubeSat telescope was recently proposed creating the additional need of phasing the telescope's mirrors. Phasing methods on compact platforms are constrained by the limited volume and power available, excluding solutions that rely on dedicated hardware or demand substantial computational resources. Neural Network (NN) are known for their computationally efficient inference and reduced on board requirements. Therefore we developed a NN based method to measure co phasing errors inherent to a deployable telescope. The proposed technique demonstrates its ability to detect phasing error at the targeted performance level (typically a wavefront error (WFE) below 15 nm RMS for a visible imager operating at the diffraction limit) using a point source. The robustness of the NN method is verified in presence of high order aberrations or noise and the results are compared against existing state of the art techniques. The developed NN model ensures its feasibility and provides a realistic pathway towards achieving diffraction limited images.
△ Less
Submitted 27 March, 2024;
originally announced March 2024.
-
Adapting the pyramid wavefront sensor for pupil fragmentation of the ELT class telescopes
Authors:
Nicolas Levraud,
Vincent Chambouleyron,
Olivier Fauvarque,
Mahawa Cissé,
Jean-François Sauvage,
Benoît Neichel,
Charlotte Bond,
Enrico Pinna,
Simone Esposito,
Noah Schwartz,
Thierry Fusco
Abstract:
The next generation of Extremely Large Telescope (24 to 39m diameter) will suffer from the so-called "pupil fragmentation" problem. Due to their pupil shape complexity (segmentation, large spiders ...), some differential pistons may appear between some isolated part of the full pupil during the observations. Although classical AO system will be able to correct for turbulence effects, they will be…
▽ More
The next generation of Extremely Large Telescope (24 to 39m diameter) will suffer from the so-called "pupil fragmentation" problem. Due to their pupil shape complexity (segmentation, large spiders ...), some differential pistons may appear between some isolated part of the full pupil during the observations. Although classical AO system will be able to correct for turbulence effects, they will be blind to this specific telescope induced perturbations. Hence, such differential piston, a.k.a petal modes, will prevent to reach the diffraction limit of the telescope and ultimately will represent the main limitation of AO-assisted observation with an ELT. In this work we analyse the spatial structure of these petal modes and how it affects the ability of a Pyramid Wavefront sensor to sense them. Then we propose a variation around the classical Pyramid concept for increasing the WFS sensitivity to this particular modes. Nevertheless, We show that one single WFS can not accurately and simultaneously measure turbulence and petal modes. We propose a double path wavefront sensor scheme to solve this problem. We show that such a scheme,associated to a spatial filtering of residual turbulence in the second WFS path dedicated to petal mode sensing, allows to fully measure and correct for both turbulence and fragmentation effects and will eventually restore the full capability and spatial resolution of the future ELT.
△ Less
Submitted 19 September, 2022;
originally announced September 2022.
-
Active deployable primary mirrors on CubeSat
Authors:
Noah Schwartz,
Maria Milanova,
William Brzozowski,
Stephen Todd,
Zeshan Ali,
Lucie Buron,
Jean-François-Sauvage,
Charlotte Bond,
Heather Bruce,
Phil Rees,
Marc Ferrari,
Donald MacLeod
Abstract:
The volume available on small satellites restricts the size of optical apertures to a few centimetres, limiting the Ground-Sampling Distance (GSD) in the visible to typically 3 m at 500 km. We present in this paper the latest development of a laboratory demonstrator of a segmented deployable telescope that will triple the achievable ground resolution and improve photometric capability of CubeSat i…
▽ More
The volume available on small satellites restricts the size of optical apertures to a few centimetres, limiting the Ground-Sampling Distance (GSD) in the visible to typically 3 m at 500 km. We present in this paper the latest development of a laboratory demonstrator of a segmented deployable telescope that will triple the achievable ground resolution and improve photometric capability of CubeSat imagers. Each mirror segment is folded for launch and unfolds in space. We demonstrate through laboratory validation very high deployment repeatability of the mirrors <{\pm}5 μm. To enable diffraction-limited imaging, segments are controlled in piston, tip, and tilt. This is achieved by an initial coarse alignment of the mirrors followed by a fine phasing step. Finally, we investigate the impact of the thermal environment on high-order wavefront error and the conceptual design of a deployable secondary fitting inside 1U.
△ Less
Submitted 26 May, 2021;
originally announced May 2021.
-
Direct imaging and spectroscopy of exoplanets with the ELT/HARMONI high-contrast module
Authors:
Mathis Houllé,
Arthur Vigan,
Alexis Carlotti,
Élodie Choquet,
Faustine Cantalloube,
Mark W. Phillips,
Jean-François Sauvage,
Noah Schwartz,
Gilles P. P. L. Otten,
Isabelle Baraffe,
Alexandre Emsenhuber,
Christoph Mordasini
Abstract:
Combining high-contrast imaging with medium-resolution spectroscopy has been shown to significantly boost the direct detection of exoplanets. HARMONI, one of the first-light instruments to be mounted on ESO's ELT, will be equipped with a single-conjugated adaptive optics system to reach the diffraction limit of the ELT in H and K bands, a high-contrast module dedicated to exoplanet imaging, and a…
▽ More
Combining high-contrast imaging with medium-resolution spectroscopy has been shown to significantly boost the direct detection of exoplanets. HARMONI, one of the first-light instruments to be mounted on ESO's ELT, will be equipped with a single-conjugated adaptive optics system to reach the diffraction limit of the ELT in H and K bands, a high-contrast module dedicated to exoplanet imaging, and a medium-resolution (up to R = 17 000) optical and near-infrared integral field spectrograph. Combined together, these systems will provide unprecedented contrast limits at separations between 50 and 400 mas. In this paper, we estimate the capabilities of the HARMONI high-contrast module for the direct detection of young giant exoplanets. We use an end-to-end model of the instrument to simulate observations based on realistic observing scenarios and conditions. We analyze these data with the so-called "molecule mapping" technique combined to a matched-filter approach, in order to disentangle the companions from the host star and tellurics, and increase the S/N of the planetary signal. We detect planets above 5-sigma at contrasts up to 16 mag and separations down to 75 mas in several spectral configurations of the instrument. We show that molecule mapping allows the detection of companions up to 2.5 mag fainter compared to state-of-the-art high-contrast imaging techniques based on angular differential imaging. We also demonstrate that the performance is not strongly affected by the spectral type of the host star, and that we reach close sensitivities for the best three quartiles of observing conditions at Armazones, which means that HARMONI could be used in near-critical observations during 60 to 70% of telescope time at the ELT. Finally, we simulate planets from population synthesis models to further explore the parameter space that HARMONI and its high-contrast module will soon open.
△ Less
Submitted 22 April, 2021;
originally announced April 2021.
-
Pyramid wavefront sensor optical gains compensation using a convolutional model
Authors:
Vincent Chambouleyron,
Olivier Fauvarque,
Pierre Janin-Potiron,
Carlos Correia,
Jean-François Sauvage,
Noah Schwartz,
Benoît Neichel,
Thierry Fusco
Abstract:
Extremely Large Telescopes have overwhelmingly opted for the Pyramid wavefront sensor (PyWFS) over the more widely used Shack-Hartmann WaveFront Sensor (SHWFS) to perform their Single Conjugate Adaptive Optics (SCAO) mode. The PyWFS, a sensor based on Fourier filtering, has proven to be highly successful in many astronomy applications. However, it exhibits non-linearity behaviors that lead to a re…
▽ More
Extremely Large Telescopes have overwhelmingly opted for the Pyramid wavefront sensor (PyWFS) over the more widely used Shack-Hartmann WaveFront Sensor (SHWFS) to perform their Single Conjugate Adaptive Optics (SCAO) mode. The PyWFS, a sensor based on Fourier filtering, has proven to be highly successful in many astronomy applications. However, it exhibits non-linearity behaviors that lead to a reduction of its sensitivity when working with non-zero residual wavefronts. This so-called Optical Gains (OG) effect, degrades the close loop performance of SCAO systems and prevents accurate correction of Non-Common Path Aberrations (NCPA). In this paper, we aim at computing the OG using a fast and agile strategy in order to control the PyWFS measurements in adaptive optics closed loop systems. Using a novel theoretical description of the PyFWS, which is based on a convolutional model, we are able to analytically predict the behavior of the PyWFS in closed-loop operation. This model enables us to explore the impact of residual wavefront error on particular aspects such as sensitivity and associated OG. The proposed method relies on the knowledge of the residual wavefront statistics and enables automatic estimation of the current OG. End-to-End numerical simulations are used to validate our predictions and test the relevance of our approach. We demonstrate, using on non-invasive strategy, that our method provides an accurate estimation of the OG. The model itself only requires AO telemetry data to derive statistical information on atmospheric turbulence. Furthermore, we show that by only using an estimation of the current Fried parameter r_0 and the basic system-level characteristics, OGs can be estimated with an accuracy of less than 10%. Finally, we highlight the importance of OG estimation in the case of NCPA compensation. The proposed method is applied to the PyWFS.
△ Less
Submitted 15 July, 2020; v1 submitted 15 June, 2020;
originally announced June 2020.
-
Design of the HARMONI Pyramid WFS module
Authors:
Noah Schwartz,
Jean-François Sauvage,
Edgard Renault,
Carlos Correia,
Benoit Neichel,
Thierry Fusco,
Kjetil Dohlen,
Kacem El Hadi,
Cyril Petit,
Elodie Choquet,
Vincent Chambouleyron,
Jerome Paufique,
Fraser Clarke,
Niranjan Thatte,
Ian Bryson
Abstract:
Current designs for all three extremely large telescopes show the overwhelming adoption of the pyramid wavefront sensor (P-WFS) as the WFS of choice for adaptive optics (AO) systems sensing on natural guide stars (NGS) or extended objects. The key advantages of the P-WFS over the Shack-Hartmann are known and are mainly provided by the improved sensitivity (fainter NGS) and reduced sensitivity to s…
▽ More
Current designs for all three extremely large telescopes show the overwhelming adoption of the pyramid wavefront sensor (P-WFS) as the WFS of choice for adaptive optics (AO) systems sensing on natural guide stars (NGS) or extended objects. The key advantages of the P-WFS over the Shack-Hartmann are known and are mainly provided by the improved sensitivity (fainter NGS) and reduced sensitivity to spatial aliasing. However, robustness and tolerances of the P-WFS for the ELTs are not currently well understood. In this paper, we present simulation results for the single-conjugate AO mode of HARMONI, a visible and near-infrared integral field spectrograph for the European Extremely Large Telescope. We first explore the wavefront sensing issues related to the telescope itself; namely the island effect (i.e. differential piston) and M1 segments phasing errors. We present mitigation strategies to the island effect and their performance. We then focus on some performance optimisation aspects of the AO design to explore the impact of the RTC latency and the optical gain issues, which will in particular affect the high-contrast mode of HARMONI. Finally, we investigate the influence of the quality of glass pyramid prism itself, and of optical aberrations on the final AO performance. By relaxing the tolerances on the fabrication of the prism, we are able to reduce hardware costs and simplify integration. We show the importance of calibration (i.e. updating the control matrix) to capture any displacement of the telescope pupil and rotation of the support structure for M4. We also show the importance of the number of pixels used for wavefront sensing to relax tolerances of the pyramid prism. Finally, we present a detailed optical design of the pyramid prism, central element of the P-WFS.
△ Less
Submitted 13 March, 2020;
originally announced March 2020.
-
Laboratory Demonstration of an Active Optics System for High-Resolution Deployable CubeSat
Authors:
Noah Schwartz,
David Pearson,
Stephen Todd,
Maria Milanova,
William Brzozowski,
Andy Vick,
David Lunney,
Donald MacLeod,
Steve Greenland,
Jean-François Sauvage,
Benjamin Gore
Abstract:
In this paper we present HighRes: a laboratory demonstration of a 3U CubeSat with a deployable primary mirror that has the potential of achieving high-resolution imaging for Earth Observation. The system is based on a Cassegrain telescope with a segmented primary mirror composed of 4 petals that form an effective aperture of 300 mm. The design provides diffraction limited performance over the enti…
▽ More
In this paper we present HighRes: a laboratory demonstration of a 3U CubeSat with a deployable primary mirror that has the potential of achieving high-resolution imaging for Earth Observation. The system is based on a Cassegrain telescope with a segmented primary mirror composed of 4 petals that form an effective aperture of 300 mm. The design provides diffraction limited performance over the entire field-of-view and allows for a panchromatic ground-sampling distance of less than 1 m at an altitude of 350 km. The alignment and co-phasing of the mirror segments is performed by focal plane sharpening and is validated through rigorous numerical simulations. The opto-mechanical design of the prototype and its laboratory demonstration are described and measurements from the on-board metrology sensors are presented. This data verifies that the performance of the mirror deployment and manipulation systems is sufficient for co-phasing. In addition, it is shown that the mirrors can be driven to any target position with an accuracy of 25 nm using closed-loop feedback between the mirror motors and the on-board metrology.
△ Less
Submitted 24 September, 2018;
originally announced September 2018.
-
Sensing and control of segmented mirrors with a pyramid wavefront sensor in the presence of spiders
Authors:
Noah Schwartz,
Jean-François Sauvage,
Carlos Correia,
Cyril Petit,
Fernando Quiros-Pacheco,
Thierry Fusco,
Kjetil Dohlen,
Kacem El Hadi,
Niranjan Thatte,
Fraser Clarke,
Jérome Paufique,
Joel Vernet
Abstract:
The segmentation of the telescope pupil (by spiders & the segmented M4) create areas of phase isolated by the width of the spiders on the wavefront sensor (WFS), breaking the spatial continuity of the wavefront. The poor sensitivity of the Pyramid WFS (PWFS) to differential piston leads to badly seen and therefore uncontrollable differential pistons. In close loop operation, differential pistons b…
▽ More
The segmentation of the telescope pupil (by spiders & the segmented M4) create areas of phase isolated by the width of the spiders on the wavefront sensor (WFS), breaking the spatial continuity of the wavefront. The poor sensitivity of the Pyramid WFS (PWFS) to differential piston leads to badly seen and therefore uncontrollable differential pistons. In close loop operation, differential pistons between segments will settle around integer values of the average sensing wavelength. The differential pistons typically range from one to ten times the sensing wavelength and vary rapidly over time, leading to extremely poor performance. In addition, aberrations created by atmospheric turbulence will contain large amounts of differential piston between the segments. Removing piston contribution over each of the DM segments leads to poor performance. In an attempt to reduce the impact of unwanted differential pistons that are injected by the AO correction, we compare three different approaches. We first limit ourselves to only use the information measured by the PWFS, in particular by reducing the modulation. We show that using this information sensibly is important but will not be sufficient. We discuss possible ways of improvement by using prior information. A second approach is based on phase closure of the DM commands and assumes the continuity of the correction wavefront over the entire unsegmented pupil. The last approach is based on the pair-wise slaving of edge actuators and shows the best results. We compare the performance of these methods using realistic end-to-end simulations. We find that pair-wise slaving leads to a small increase of the total wavefront error, only adding between 20-45 nm RMS in quadrature for seeing conditions between 0.45-0.85 arcsec. Finally, we discuss the possibility of combining the different proposed solutions to increase robustness.
△ Less
Submitted 24 September, 2018;
originally announced September 2018.
-
The adaptive optics modes for HARMONI: from Classical to Laser Assisted Tomographic AO
Authors:
B. Neichel,
T. Fusco,
J. -F. Sauvage,
C. Correia,
K. Dohlen,
K. El-Hadi,
L. Blanco,
N. Schwartz,
F. Clarke,
N. Thatte,
M. Tecza,
J. Paufique,
J. Vernet,
M. Le Louarn,
P. Hammersley,
J. -L. Gach,
S. Pascal,
P. Vola,
C. Petit,
J. -M. Conan,
A. Carlotti,
C. Verinaud,
H. Schnetler,
I. Bryson,
T. Morris
, et al. (3 additional authors not shown)
Abstract:
HARMONI is a visible and NIR integral field spectrograph, providing the E-ELT's core spectroscopic capability at first light. HARMONI will work at the diffraction limit of the E-ELT, thanks to a Classical and a Laser Tomographic AO system. In this paper, we present the system choices that have been made for these SCAO and LTAO modules. In particular, we describe the strategy developed for the diff…
▽ More
HARMONI is a visible and NIR integral field spectrograph, providing the E-ELT's core spectroscopic capability at first light. HARMONI will work at the diffraction limit of the E-ELT, thanks to a Classical and a Laser Tomographic AO system. In this paper, we present the system choices that have been made for these SCAO and LTAO modules. In particular, we describe the strategy developed for the different Wave-Front Sensors: pyramid for SCAO, the LGSWFS concept, the NGSWFS path, and the truth sensor capabilities. We present first potential implementations. And we asses the first system performance.
△ Less
Submitted 30 May, 2018;
originally announced May 2018.