Showing 1–9 of 9 results for author: Bacca, M

Making the cut: end effects and the benefits of slicing

Authors: Bharath Antarvedi Goda, David Labonte, Mattia Bacca

Abstract: Cutting mechanics in soft solids have been a subject of study for several decades, an interest fuelled by the multitude of its applications, including material testing, manufacturing, and biomedical technology. Wire cutting is the simplest model system to analyze the cutting resistance of a soft material. However, even for this simple system, the complex failure mechanisms that underpin cutting ar… ▽ More Cutting mechanics in soft solids have been a subject of study for several decades, an interest fuelled by the multitude of its applications, including material testing, manufacturing, and biomedical technology. Wire cutting is the simplest model system to analyze the cutting resistance of a soft material. However, even for this simple system, the complex failure mechanisms that underpin cutting are still not completely understood. Several models that connect the critical cutting force to the radius of the wire and the key mechanical properties of the cut material have been proposed. An almost ubiquitous simplifying assumption is a state of plane (and anti-plane) strain in the material. In this paper, we show that this assumption can lead to erroneous conclusions because even such a simple cutting problem is essentially three-dimensional. A planar approximation restricts the analysis to the stress distribution in the mid-plane. However, through finite element modeling, we reveal that the maximal tensile stress - and thus the likely location of cut initiation - is in fact located in the front plane. Friction reduces the magnitude of this stress, but this detrimental effect can be counteracted by large slice-to-push (shear-to-indentation) ratios. The introduction of these end effects helps reconcile a recent controversy around the role of friction in wire cutting, for it implies that slicing can indeed reduce required cutting forces, but only if the slice-push ratio and the friction coefficient are sufficiently large. Material strain-stiffening reduces the critical indentation depth required to initiate the cut further and thus needs to be considered when cutting non-linearly elastic materials. △ Less

Submitted 28 October, 2023; originally announced October 2023.

A model for the contraction kinetics of cytoskeletal gel slabs

Authors: Matteo Ferraresso, Mohammad Shojaeifard, Albert Kong, Mattia Bacca

Abstract: Cytoskeletal gels are engineered prototypes that mimic the contractile behavior of a cell in-vitro. They are composed of an active polymer matrix and a liquid solvent. Their contraction kinetics is governed by two dynamic phenomena: mechanotransduction (molecular motor activation), and solvent diffusion. In this paper, we solve the transient problem for the simple case of a thin gel slab in uniaxi… ▽ More Cytoskeletal gels are engineered prototypes that mimic the contractile behavior of a cell in-vitro. They are composed of an active polymer matrix and a liquid solvent. Their contraction kinetics is governed by two dynamic phenomena: mechanotransduction (molecular motor activation), and solvent diffusion. In this paper, we solve the transient problem for the simple case of a thin gel slab in uniaxial contraction under two extreme conditions: motor-limited or slow motor activation (SM) regime, and diffusion-limited or fast motor activation (FM) regime. The former occurs when diffusion is much faster than mechanotransduction, while the latter occurs in the opposite case. We observe that in the SM regime, the contraction time scales as t/t_0 ~ (l/l_0)^(-3), with t_0 the nominal contraction time, and l and l_0 are the final and initial stretches of the slab. t_0 is proportional to 1/w, where w is the average mechanical power generated by the molecular motors per unit reference (dry polymer) volume. In the FM regime, the contraction time scales as t/t_1 ~ (1-l/l_0)^2, with t_1 the nominal contraction time, here proportional to the ratio L^2/D, where L is the reference (dry polymer) thickness, and D is the diffusivity of the solvent in the gel. The transition between the SM and FM regimes is defined by a characteristic power density w^*, where w << w^* gives the SM regime and w >> w^* gives the FM regime. Intuitively, w^* is proportional to D/L^2, where, at a given power density w, a thinner gel slab (smaller L) or including smaller solvent molecules (higher D) is more likely to be in the SM regime given that solvent diffusion will occur faster than motor activation. △ Less

Submitted 31 May, 2023; originally announced May 2023.

Theoretical Puncture Mechanics of Soft Compressible Solids

Authors: Stefano Fregonese, Zhiyuan Tong, Sibo Wang, Mattia Bacca

Abstract: Accurate prediction of the force required to puncture a soft material is critical in many fields like medical technology, food processing, and manufacturing. However, such a prediction strongly depends on our understanding of the complex nonlinear behavior of the material subject to deep indentation and complex failure mechanisms. Only recently we developed theories capable of correlating puncture… ▽ More Accurate prediction of the force required to puncture a soft material is critical in many fields like medical technology, food processing, and manufacturing. However, such a prediction strongly depends on our understanding of the complex nonlinear behavior of the material subject to deep indentation and complex failure mechanisms. Only recently we developed theories capable of correlating puncture force with material properties and needle geometry. However, such models are based on simplifications that seldom limit their applicability to real cases. One common assumption is the incompressibility of the cut material, albeit no material is truly incompressible. In this paper we propose a simple model that accounts for linearly elastic compressibility, and its interplay with toughness, stiffness, and elastic strain-stiffening. Confirming previous theories and experiments, materials having high-toughness and low-modulus exhibit the highest puncture resistance at a given needle radius. Surprisingly, in these conditions, we observe that incompressible materials exhibit the lowest puncture resistance, where volumetric compressibility can create an additional (strain) energy barrier to puncture. Our model provides a valuable tool to assess the puncture resistance of soft compressible materials and suggests new design strategies for sharp needles and puncture-resistant materials. △ Less

Submitted 26 April, 2023; originally announced April 2023.

Energetics of Cytoskeletal Gel Contraction

Authors: Matteo Ferraresso, Albert Kong, Mehadi Hasan, Gwynn J. Elfring, Daniele Agostinelli, Mattia Bacca

Abstract: Cytoskeletal gels are prototyped to reproduce the mechanical contraction of the cytoskeleton in-vitro. They are composed of a polymer network (backbone), swollen by the presence of a liquid solvent, and active molecules (molecular motors, MMs) that transduce chemical energy into the mechanical work of contraction. These motors attach to the polymer chains to shorten them and/or act as dynamic cros… ▽ More Cytoskeletal gels are prototyped to reproduce the mechanical contraction of the cytoskeleton in-vitro. They are composed of a polymer network (backbone), swollen by the presence of a liquid solvent, and active molecules (molecular motors, MMs) that transduce chemical energy into the mechanical work of contraction. These motors attach to the polymer chains to shorten them and/or act as dynamic crosslinks, thereby constraining the thermal fluctuation of the chains. We describe both mechanisms thermodynamically as a microstructural reconfiguration, where the backbone stiffens to motivate solvent (out)flow and accommodate contraction. Via simple steady-state energetic analysis, under the simplest case of isotropic contraction, we quantify the mechanical energy required to achieve contraction as a function of polymer chain density and molecular motor density. We identify two limit cases, (fm) fast MM activation for which MMs provide all the available mechanical energy instantaneously and leave the polymer in a stiffened state, i.e. their activity occurs at a time scale that is much smaller than solvent diffusion, and (sm) slow MM activation for which the MM activation timescale is much longer. To achieve the same final contracted state, fm requires the largest amount of work per unit reference volume, while sm requires the least. For all intermediate cases where the timescale of MM activation is comparable with that of solvent flow, the required work ranges between the two cases. We provide all these quantities as a function of chain density and MM density. Finally, we compare our results with experiments and observe good agreement. △ Less

Submitted 22 June, 2023; v1 submitted 17 November, 2022; originally announced November 2022.

Multi-material topology optimization of adhesive backing layers via J-integral and strain energy minimizations

Authors: Zhiyuan Tong, Farid H. Benvidi, Mattia Bacca

Abstract: Strong adhesives rely on reduced stress concentrations, often obtained via specific geometry or composition of materials. In many examples in nature and engineering prototypes, the adhesive performance relies on structural rigidity being placed in specific locations. A few design principles have been formulated, based on parametric optimization, while a general design tool is still missing. We pro… ▽ More Strong adhesives rely on reduced stress concentrations, often obtained via specific geometry or composition of materials. In many examples in nature and engineering prototypes, the adhesive performance relies on structural rigidity being placed in specific locations. A few design principles have been formulated, based on parametric optimization, while a general design tool is still missing. We propose to use topology optimization to achieve optimal stiffness distribution in a multi-material adhesive backing layer, reducing stress concentration at specified locations. The method involves the minimization of a linear combination of J-integral and strain energy. While the J-integral minimization is aimed at reducing stress concentration, we observe that the combination of these two objectives ultimately provides the best results. We analyze three cases in plane strain conditions, namely (i) double-edged crack and (ii) center crack in tension and (iii) edge crack under shear. Each case evidences a different optimal topology with (i) and (ii) providing similar results. The optimal topology allocates stiffness in regions that are far away from the crack tip, intuitively, but the allocation of softer materials over stiffer ones can be non-trivial. To test our solutions, we plot the contact stress distribution across the interface. In all observed cases, we eliminate the stress singularity at the crack tip. Stress concentrations might arise in locations far away from the crack tip, but the final results are independent of crack size. Our method ultimately provides optimal, flaw tolerant, adhesives where the crack location is known. △ Less

Submitted 22 June, 2023; v1 submitted 9 October, 2022; originally announced October 2022.

Theoretical limits in detachment strength for axisymmetric bi-material adhesives

Authors: Farid Hoseynian Benvidi, Mattia Bacca

Abstract: Dry adhesives rely on short-ranged intermolecular bonds, hence requiring a low elastic modulus to conform to the surface roughness of the adhered material. Under external loads, however, soft adhesives accumulate strain energy, which release drives the propagation of interfacial flaws prompting detachment. The ideal adhesive is then soft but rigid. The solution to this controversial requirement is… ▽ More Dry adhesives rely on short-ranged intermolecular bonds, hence requiring a low elastic modulus to conform to the surface roughness of the adhered material. Under external loads, however, soft adhesives accumulate strain energy, which release drives the propagation of interfacial flaws prompting detachment. The ideal adhesive is then soft but rigid. The solution to this controversial requirement is a bi-material adhesive having a soft tip, for surface conformation, and a rigid backing, for reduced strain energy release, hence, better adhesive strength. This design strategy is widely observed in nature across multiple species. However, the detachment mechanisms of these adhesives are poorly understood and quantitative analysis of their adhesive strength is still missing. Based on linear elastic fracture mechanics, we analyze the strength of axisymmetric bi-material adhesives. We observed two main detachment mechanisms, namely (i) center crack propagation and (ii) edge crack propagation. If the soft tip is sufficiently thin, mechanism (i) dominates and provides stable crack propagation, thereby toughening the interface. We ultimately provide the maximum theoretical strength of these adhesives obtaining closed form estimates for the detachment stress independent of the crack size, rendering the interface flaw tolerant. △ Less

Submitted 8 April, 2021; v1 submitted 22 February, 2021; originally announced February 2021.

Optimal load sharing in bioinspired fibrillar adhesives: Asymptotic solution

Authors: Harman Khungura, Mattia Bacca

Abstract: We propose here an asymptotic solution defining the optimal compliance distribution for a fibrillar adhesive to obtain maximum theoretical strength. This condition corresponds to that of equal load sharing (ELS) among fibrils, i.e. all the fibrils are carrying the same load at detachment, hence they all detach simultaneously. We model the array of fibrils as a continuum of linear elastic material… ▽ More We propose here an asymptotic solution defining the optimal compliance distribution for a fibrillar adhesive to obtain maximum theoretical strength. This condition corresponds to that of equal load sharing (ELS) among fibrils, i.e. all the fibrils are carrying the same load at detachment, hence they all detach simultaneously. We model the array of fibrils as a continuum of linear elastic material that cannot laterally transmit load (analogous to a Winkler soil). Ultimately, we obtain the continuum distribution of fibril's compliance in closed-form solution and compare it with previously obtained data for a discrete model for fibrillar adhesives. The results show improving accuracy for an incremental number of fibrils and smaller center-to-center spacing. Surprisingly, the approximation introduced by the asymptotic model show reduced sensitivity of the adhesive strength with respect to misalignment and improved adhesive strength for large misalignment angles. △ Less

Submitted 10 November, 2019; originally announced November 2019.

Comments: 15 pages, 7 figures

Contraction of polymer gels created by the activity of molecular motors

Authors: Mattia Bacca, Omar A. Saleh, Robert M. McMeeking

Abstract: We propose a theory based on non-equilibrium thermodynamics to describe the mechanical behavior of an active polymer gel created by the inclusion of molecular motors in its solvent. When activated, these motors attach to the chains of the polymer network and shorten them creating a global contraction of the gel, which mimics the active behavior of a cytoskeleton. The power generated by these motor… ▽ More We propose a theory based on non-equilibrium thermodynamics to describe the mechanical behavior of an active polymer gel created by the inclusion of molecular motors in its solvent. When activated, these motors attach to the chains of the polymer network and shorten them creating a global contraction of the gel, which mimics the active behavior of a cytoskeleton. The power generated by these motors is obtained by ATP hydrolysis reaction, which transduces chemical energy into mechanical work. The latter is described by an increment of strain energy in the gel due to an increased stiffness. This effect is described with an increment of the cross-link density in the polymer network, which reduces its entropy. The theory then considers polymer network swelling and species diffusion to describe the transient passive behavior of the gel. We finally formulate the problem of uniaxial contraction of a slab of gel and compare the results with experiments, showing good agreement. △ Less

Submitted 30 May, 2019; v1 submitted 18 December, 2018; originally announced December 2018.

Anisotropic effective higher-order response of heterogeneous Cauchy elastic materials

Authors: Mattia Bacca, Francesco Dal Corso, Daniele Veber, Davide Bigoni

Abstract: The homogenization results obtained by Bacca et al. (Homogenization of heterogeneous Cauchy-elastic materials leads to Mindlin second-gradient elasticity. Part I: Closed form expression for the effective higher-order constitutive tensor. arXiv:1305.2365 Submitted, 2013), to define effective second-gradient elastic materials from heterogeneous Cauchy elastic solids, are extended here to the case of… ▽ More The homogenization results obtained by Bacca et al. (Homogenization of heterogeneous Cauchy-elastic materials leads to Mindlin second-gradient elasticity. Part I: Closed form expression for the effective higher-order constitutive tensor. arXiv:1305.2365 Submitted, 2013), to define effective second-gradient elastic materials from heterogeneous Cauchy elastic solids, are extended here to the case of phases having non-isotropic tensors of inertia. It is shown that the nonlocal constitutive tensor for the homogenized material depends on both the inertia properties of the RVE and the difference between the effective and the matrix local elastic tensors. Results show that: (i.) a composite material can be designed to result locally isotropic but nonlocally orthotropic; (ii.) orthotropic nonlocal effects are introduced when a dilute distribution of aligned elliptical holes and, in the limit case, of cracks is homogenized. △ Less

Submitted 3 June, 2013; originally announced June 2013.

Comments: 13 pages, 3 figures

Journal ref: Mechanics Research Communications (2013) 54, 63-71