-
Fundamental Crystal Field Excitations in Magnetic Semiconductor SnO$_2$:Mn,Fe,Co,Ni
Authors:
B. Leedahl,
D. J. McCloskey,
D. W. Boukhvalov,
I. S. Zhidkov,
A. I. Kukharenko,
E. Z. Kurmaev,
S. O. Cholakh,
N. V. Gavrilov,
V. I. Brinzari,
A. Moewes
Abstract:
Directly measuring elementary electronic excitations in dopant $3d$ metals is essential to understanding how they function as part of their host material. Through calculated crystal field splittings of the $3d$ electron band it is shown how transition metals Mn, Fe, Co, and Ni are incorporated into SnO$_2$. The crystal field splittings are compared to resonant inelastic x-ray scattering (RIXS) exp…
▽ More
Directly measuring elementary electronic excitations in dopant $3d$ metals is essential to understanding how they function as part of their host material. Through calculated crystal field splittings of the $3d$ electron band it is shown how transition metals Mn, Fe, Co, and Ni are incorporated into SnO$_2$. The crystal field splittings are compared to resonant inelastic x-ray scattering (RIXS) experiments, which measure precisely these elementary $dd$ excitations. The origin of spectral features can be determined and identified via this comparison, leading to an increased understanding of how such dopant metals situate themselves in, and modify the host's electronic and magnetic properties; and also how each element differs when incorporated into other semiconducting materials. We found that oxygen vacancy formation must not occur at nearest neighbour sites to metal atoms, but instead must reside at least two coordination spheres beyond. The coordination of the dopants within the host can then be explicitly related to the $d$-electron configurations and energies. This approach facilitates an understanding of the essential link between local crystal coordination and electronic/magnetic properties.
△ Less
Submitted 7 August, 2019;
originally announced August 2019.
-
XPS evidence of degradation mechanism in hybrid halide perovskites
Authors:
I. S. Zhidkov,
A. I. Poteryaev,
A. Kukharenko,
L. D. Finkelstein,
S. O. Cholakh,
A. F. Akbulatov,
P. A. Troshin,
C. -C. Chueh,
E. Z. Kurmaev
Abstract:
The paper presents the results of measurements of XPS valence band spectra of SiO2/MAPbI3 hybrid perovskites subjected to irradiation with visible light and annealing at an exposure of 0-1000 hours. It is found from XPS survey spectra that in both cases (irradiation and annealing) a decrease in the I:Pb ratio is observed with aging time, which unambiguously indicates PbI2 phase separation as a pho…
▽ More
The paper presents the results of measurements of XPS valence band spectra of SiO2/MAPbI3 hybrid perovskites subjected to irradiation with visible light and annealing at an exposure of 0-1000 hours. It is found from XPS survey spectra that in both cases (irradiation and annealing) a decrease in the I:Pb ratio is observed with aging time, which unambiguously indicates PbI2 phase separation as a photo and thermal product of degradation. The comparison of the XPS valence band spectra of irradiated and annealed perovskites with density functional theory calculations of the MAPbI3 and PbI2 compounds have shown a systematic decrease in the contribution of I 5p-states and allowed us to determine the threshold for degradation, which is 500 hours for light irradiation and 200 hours for annealing.
△ Less
Submitted 21 June, 2019;
originally announced June 2019.
-
Atomic and electronic structure of graphene oxide/Cu interface
Authors:
Danil W. Boukhvalov,
Ernst Z. Kurmaev,
Ewelina UrbaĆczyk,
Grzegorz Dercz,
Agnieszka Stolarczyk,
Wojciech Simka,
Andrey I. Kukharenko,
Ivan S. Zhidkov,
Anatoly I. Slesarev,
Anatoly F. Zatsepin,
Seif O. Cholakh
Abstract:
The results of X-ray photoemission (XPS) and valence bands spectroscopy, optically stimulated electron emission (OSEE) measurements and density functional theory based modeling of graphene oxide (GO) placed on Cu via an electrophoretic deposition (EPD) are reported. The comparison of XPS spectra of EPD prepared GO/Cu composites with those of as prepared GO, strongly reduced GO, pure and oxidized c…
▽ More
The results of X-ray photoemission (XPS) and valence bands spectroscopy, optically stimulated electron emission (OSEE) measurements and density functional theory based modeling of graphene oxide (GO) placed on Cu via an electrophoretic deposition (EPD) are reported. The comparison of XPS spectra of EPD prepared GO/Cu composites with those of as prepared GO, strongly reduced GO, pure and oxidized copper demonstrate the partial (until C/O ratio about two) removal of oxygen-containing functional groups from GO simultaneously with the formation of copper oxide-like layers over the metallic substrate. OSEE measurements evidence the presence of copper oxide phase in the systems simultaneously with the absence of contributions from GO with corresponding energy gap. All measurements demonstrate the similarity of the results for different thickness of GO cover of the copper surface. Theoretical modeling demonstrates favorability of migration of oxygen-containing functional groups from GO to the copper substrate only for the case of C/O ratio below two and formation of Cu-O-C bonds between substrate and GO simultaneously with the vanishing of the energy gap in GO layer. Basing on results of experimental measurements and theoretical calculations we suggest the model of atomic structure for Cu/GO interface as Cu/CuO/GO with C/O ratio in gapless GO about two.
△ Less
Submitted 3 September, 2018;
originally announced September 2018.
-
Stability of boron-doped graphene/copper interface: DFT, XPS and OSEE studies
Authors:
D. W. Boukhvalov,
I. S. Zhidkov,
A. I. Kukharenko,
A. I. Slesarev,
A. F. Zatsepin,
S. O. Cholakh,
E. Z. Kurmaev
Abstract:
Two different types of boron-doped graphene/copper interfaces synthesized using two different flow rates of Ar through the bubbler containing the boron source were studied. X-ray photoelectron spectra (XPS) and optically stimulated electron emission (OSEE) measurements have demonstrated that boron-doped graphene coating provides a high corrosion resistivity of Cu-substrate with the light traces of…
▽ More
Two different types of boron-doped graphene/copper interfaces synthesized using two different flow rates of Ar through the bubbler containing the boron source were studied. X-ray photoelectron spectra (XPS) and optically stimulated electron emission (OSEE) measurements have demonstrated that boron-doped graphene coating provides a high corrosion resistivity of Cu-substrate with the light traces of the oxidation of carbon cover. The density functional theory calculations suggest that for the case of substitutional (graphitic) boron-defect only the oxidation near boron impurity is energetically favorable and creation of the vacancies that can induce the oxidation of copper substrate is energetically unfavorable. In the case of non-graphitic boron defects oxidation of the area, a nearby impurity is metastable that not only prevent oxidation but makes boron-doped graphene. Modeling of oxygen reduction reaction demonstrates high catalytic performance of these materials.
△ Less
Submitted 7 February, 2018;
originally announced February 2018.
-
Atomic and electronic structures of stable linear carbon chains on Ag-nanoparticles
Authors:
D. W. Boukhvalov,
I. S. Zhidkov,
E. Z. Kurmaev,
E. Fazio,
S. O. Cholakh,
L. D'Urso
Abstract:
In this work, we report X-ray photoelectron (XPS) and valence band (VB) spectroscopy measurements of surfactant-free silver nanoparticles and silver/linear carbon chains (Ag@LCC) structures prepared by pulse laser ablation (PLA) in water. Our measurements demonstrate significant oxidation only on the surfaces of the silver nanoparticles with many covalent carbon-silver bonds but only negligible tr…
▽ More
In this work, we report X-ray photoelectron (XPS) and valence band (VB) spectroscopy measurements of surfactant-free silver nanoparticles and silver/linear carbon chains (Ag@LCC) structures prepared by pulse laser ablation (PLA) in water. Our measurements demonstrate significant oxidation only on the surfaces of the silver nanoparticles with many covalent carbon-silver bonds but only negligible traces of carbon-oxygen bonds. Theoretical modeling also provides evidence of the formation of robust carbon-silver bonds between linear carbon chains and pure and partially oxidized silver surfaces. A comparison of theoretical and experimental electronic structures also provides evidence of the presence of non-oxidized linear carbon chains on silver surfaces. To evaluate the chemical stability, we investigated the energetics of the physical adsorption of oxidative species (water and oxygen) and found that this adsorption is much preferrable on oxidized or pristine silver surfaces than the adsorption of linear carbon chains, which makes the initial step in the oxidation of LCC energetically unfavorable.
△ Less
Submitted 19 November, 2017;
originally announced November 2017.
-
Atomic and electronic structure of a copper/graphene interface as prepared and 1.5 years after
Authors:
D. W. Boukhvalov,
P. F. Bazylewski,
A. I. Kukharenko,
I. S. Zhidkov,
Yu. S. Ponosov,
E. Z. Kurmaev,
S. O. Cholakh,
Y. H. Lee,
G. S. Chang
Abstract:
We report the results of X-ray spectroscopy and Raman measurements of as-prepared graphene on a high quality copper surface and the same materials after 1.5 years under different conditions (ambient and low humidity). The obtained results were compared with density functional theory calculations of the formation energies and electronic structures of various structural defects in graphene/Cu interf…
▽ More
We report the results of X-ray spectroscopy and Raman measurements of as-prepared graphene on a high quality copper surface and the same materials after 1.5 years under different conditions (ambient and low humidity). The obtained results were compared with density functional theory calculations of the formation energies and electronic structures of various structural defects in graphene/Cu interfaces. For evaluation of the stability of the carbon cover, we propose a two-step model. The first step is oxidation of the graphene, and the second is perforation of graphene with the removal of carbon atoms as part of the carbon dioxide molecule. Results of the modeling and experimental measurements provide evidence that graphene grown on high-quality copper substrate becomes robust and stable in time (1.5 years). However, the stability of this interface depends on the quality of the graphene and the number of native defects in the graphene and substrate. The effect of the presence of a metallic substrate with defects on the stability and electronic structure of graphene is also discussed.
△ Less
Submitted 30 July, 2017;
originally announced July 2017.
-
The characterization of Co-nanoparticles supported on graphene
Authors:
P. Bazylewski,
D. W. Boukhvalov,
A. I. Kukharenko,
E. Z. Kurmaev,
A. Hunt,
A. Moewes,
Y. H. Lee,
S. O. Cholakh,
G. S. Chang
Abstract:
The results of density functional theory calculations and measurements using X-ray photoelectron spectroscopy of Co-nanoparticles dispersed on graphene/Cu are presented. It is found that for low cobalt thickness (0.02 nm - 0.06 nm) the Co forms islands distributed non-homogeneously which are strongly oxidized under exposure to air to form cobalt oxides. At greater thicknesses up to 2 nm the upper…
▽ More
The results of density functional theory calculations and measurements using X-ray photoelectron spectroscopy of Co-nanoparticles dispersed on graphene/Cu are presented. It is found that for low cobalt thickness (0.02 nm - 0.06 nm) the Co forms islands distributed non-homogeneously which are strongly oxidized under exposure to air to form cobalt oxides. At greater thicknesses up to 2 nm the upper Co-layers are similarly oxidized whereas the lower layers contacting the graphene remain metallic. The measurements indicate a Co2+ oxidation state with no evidence of a 3+ state appearing at any Co thickness, consistent with CoO and Co[OH]2. The results show that thicker Co (2nm) coverage induces the formation of a protective oxide layer while providing the magnetic properties of Co nanoparticles.
△ Less
Submitted 2 September, 2015;
originally announced September 2015.
-
XPS and DFT study of Sn incorporation into ZnO and TiO2 host matrices by pulsed ion implantation
Authors:
D. A. Zatsepin,
D. W. Boukhvalov,
E. Z. Kurmaev,
I. S. Zhidkov,
S. S. Kim,
L. Cui,
N. V. Gavrilov,
S. O. Cholakh
Abstract:
Bulk and thin films ZnO and TiO2 samples were doped with Sn by pulsed ion implantation and studied by means of X-ray photoelectron core-level and valence band spectroscopy as well as density functional theory calculations for comprehensive study of the incorporation of Sn. XPS spectral analysis showed that isovalent Sn cation substitution occurs in both zinc oxide (Sn2+ -> Zn2+) and titanium dioxi…
▽ More
Bulk and thin films ZnO and TiO2 samples were doped with Sn by pulsed ion implantation and studied by means of X-ray photoelectron core-level and valence band spectroscopy as well as density functional theory calculations for comprehensive study of the incorporation of Sn. XPS spectral analysis showed that isovalent Sn cation substitution occurs in both zinc oxide (Sn2+ -> Zn2+) and titanium dioxide (Sn4+ -> Ti4+) for bulk and film morphologies. For TiO2 films, the implantation also led to occupation of interstitials by doped ions, which induced the clustering of substituted and embedded Sn atoms; this did not occur in ZnO:Sn film samples. Density functional theory (DFT) formation energies were calculated of various incorporation processes, explaining the prevalence of substitutional defects in both matrices. Possible mechanisms and reasons for the observed trends in Sn incorporation into the ZnO and TiO2 matrices are discussed.
△ Less
Submitted 5 May, 2015;
originally announced May 2015.
-
Electronic structure and magnetic properties of graphene/Co composites
Authors:
I. S. Zhidkov,
N. A. Skorikov,
A. V. Korolev,
A. I. Kukharenko,
E. Z. Kurmaev,
V. E. Fedorov,
S. O. Cholakh
Abstract:
The results of measurements of XPS spectra and magnetic properties of graphene/Co composites prepared by adding of CoCl$_2$x6H$_2$O diluted in ethyl alcohol to highly-splitted graphite are presented. XPS Co 2p measurements show two sets of 2p$_{3/2,1/2}$-lines belonging to oxidized and metallic Co-atoms. This means that metal in composite is partly oxidized. This conclusion is confirmed by magneti…
▽ More
The results of measurements of XPS spectra and magnetic properties of graphene/Co composites prepared by adding of CoCl$_2$x6H$_2$O diluted in ethyl alcohol to highly-splitted graphite are presented. XPS Co 2p measurements show two sets of 2p$_{3/2,1/2}$-lines belonging to oxidized and metallic Co-atoms. This means that metal in composite is partly oxidized. This conclusion is confirmed by magnetic measurements which show the presence of the main (from the metal) and shifted (from the oxide) hysteresis loops. The presence of oxide layer on the metal surface prevents the metal from the full oxidation and (as shown by magnetic measurements) provides the preservation of ferromagnetic properties after long exposure in ambient air which enables the use of graphene/metal composites in spintronics devices.
△ Less
Submitted 14 November, 2014;
originally announced November 2014.
-
Characterization of TiAlSiON Coatings Deposited by Plasma Enhanced Magnetron Sputtering: XRD, XPS, and DFT Studies
Authors:
A. S. Kamenetskih,
A. I. Kukharenko,
E. Z. Kurmaev,
N. A. Skorikov,
N. V. Gavrilov,
S. O. Cholakh,
A. V. Chukin,
V. M. Zainullina,
M. A. Korotin
Abstract:
The results of characterization of TiAlSiON hard coatings deposited on ferric-chromium AISI 430 stainless steel by plasma enhanced magnetron sputtering are presented. The coating with maximum hardness (of 45 GPa) was obtained at the following optimal values of elemental concentrations: Si ~5 at.%, Al ~15 at.%, and Ti ~27 at.%. The elastic modulus of the coating was 590 GPa. The reading of gaseous…
▽ More
The results of characterization of TiAlSiON hard coatings deposited on ferric-chromium AISI 430 stainless steel by plasma enhanced magnetron sputtering are presented. The coating with maximum hardness (of 45 GPa) was obtained at the following optimal values of elemental concentrations: Si ~5 at.%, Al ~15 at.%, and Ti ~27 at.%. The elastic modulus of the coating was 590 GPa. The reading of gaseous mixture (Ar-N2) pressure was 1*10-3 Torr and the reading of partial pressure of oxygen (O2) was 1*10-5 Torr. The X-ray diffraction (XRD) measurements showed the presence of Ti(Al)N. High-energy resolved XPS spectra of core levels revealed the formation of Ti-N, Ti-O-N, Si-N and Al-O-N bonds. Comparison of XPS valence band spectra with specially performed density functional theory calculations for two ordered and few disordered TiN1-xOx (0 =< x <= 1) demonstrates that a Ti(Al)OxNy phase is formed on the surface of AISI430 steel upon the plasma enhanced magnetron sputtering, which provides this material with a good combination of high hardness and improved oxidation resistance.
△ Less
Submitted 14 November, 2014;
originally announced November 2014.
-
The characterization of Co-nanoparticles supported on graphene
Authors:
Paul Bazylewski,
Danil W. Boukhvalov,
Andrey I. Kukharenko,
Ernst. Z. Kurmaev,
Nikolay A. Skorikov,
Adrian Hunt,
Alexander Moewes,
Young Hee Lee,
Seif O. Cholakh,
Gap Soo Chang
Abstract:
The results of density functional theory (DFT) calculations and measurements of X-ray photoelectron (XPS) and X-ray emission (XES) spectra of Co-nanoparticles dispersed on graphene/Cu composites are presented. It is found that for 0.02nm and 0.06nm Co coverage the Co atoms form islands which are strongly oxidized under exposure at the air. For Co (2nm) coverage the upper Co-layers is oxidized wher…
▽ More
The results of density functional theory (DFT) calculations and measurements of X-ray photoelectron (XPS) and X-ray emission (XES) spectra of Co-nanoparticles dispersed on graphene/Cu composites are presented. It is found that for 0.02nm and 0.06nm Co coverage the Co atoms form islands which are strongly oxidized under exposure at the air. For Co (2nm) coverage the upper Co-layers is oxidized whereas the lower layers contacting with graphene is in metallic state. Therefore Co (2 nm) coverage induces the formation of protective oxide layer providing the ferromagnetic properties of Co nanoparticles which can be used as spin filters in spintronics devices.
△ Less
Submitted 17 November, 2014; v1 submitted 13 November, 2014;
originally announced November 2014.
-
Characterization of solution processed TiOx buffer layers in inverted organic photovoltaics by XPS and DFT studies
Authors:
Ivan S. Zhidkov,
Ernst Z. Kurmaev,
Michel A. Korotin,
Andrey I. Kukharenko,
Achilleas Savva,
Stelios A. Choulis,
Danila M. Korotin,
Seif O. Cholakh
Abstract:
We present the results of XPS measurements (core levels and valence bands) of solution processed TiOx thin films prepared from titanium butoxide (C16H36O4Ti) diluted in isopropanol which is a common sol-gel route for fabricating TiOx electron selective contacts for ITO/TiOx inverted organic photovoltaics bottom electrodes. XPS Ti 2p and valence band spectra show the presence of additional features…
▽ More
We present the results of XPS measurements (core levels and valence bands) of solution processed TiOx thin films prepared from titanium butoxide (C16H36O4Ti) diluted in isopropanol which is a common sol-gel route for fabricating TiOx electron selective contacts for ITO/TiOx inverted organic photovoltaics bottom electrodes. XPS Ti 2p and valence band spectra show the presence of additional features which are absent in spectra of titanium butoxide deposited on Si and are attributed to appearance of Ti^{3+} valence states in ITO/TiOx. This conclusion is confirmed by density functional theory electronic structure calculations of stoichiometric TiO2 and oxygen deficient TiO_{2-1/8}. XPS C 1s measurements show the formation of C-O and O-C=O bonds which evidence the presence of residual carbon which can draw oxygen from the film network and induce the formation of fraction of Ti3+ states in TiOx films.
△ Less
Submitted 6 November, 2014;
originally announced November 2014.
-
Modification of titanium and titanium dioxide surfaces by ion implantation: combined XPS and DFT study
Authors:
D. W. Boukhvalov,
D. M. Korotin,
A. I. Efremov,
E. Z. Kurmaev,
Ch. Borchers,
I. S. Zhidkov,
D. V. Gunderov,
R. Z. Valiev,
N. V. Gavrilov,
S. O. Cholakh
Abstract:
The results of XPS measurements (core levels and valence bands) of P+, Ca+, P+Ca+ and Ca+P+ ion implanted (E=30 keV, D=1x1017 cm-2) commercially pure titanium (cp-Ti) and first-principles density functional theory (DFT) calculations demonstrates formation of various structural defects in titanium dioxide films formed on the surface of implanted materials. We have found that for double implantation…
▽ More
The results of XPS measurements (core levels and valence bands) of P+, Ca+, P+Ca+ and Ca+P+ ion implanted (E=30 keV, D=1x1017 cm-2) commercially pure titanium (cp-Ti) and first-principles density functional theory (DFT) calculations demonstrates formation of various structural defects in titanium dioxide films formed on the surface of implanted materials. We have found that for double implantation (Ti:P+,Ca+ and Ti:Ca+,P+) the outermost surface layer formed mainly by Ca and P, respectively, i.e. the implantation sequence is very important. The DFT calculations show that under P+ and Ca+P+ ion implantation the formation energies for both cation (P-Ti) and anion (P-O) substitutions are comparable which can induce the creation of [PO4]3- and Ti-P species. For Ca+ and P+Ca+-ion implantation the calculated formation energies correspond to Ca2+-Ti4+ cation substitution. This conclusion is in agreement with XPS Ca 2p and Ti 2p core levels and valence band measurements and DFT calculations of electronic structure of related compounds. The conversion of implanted ions to Ca2+ and [PO4]3- species provides a good biocompatibility of cp-Ti for further formation of hydroxyapatite.
△ Less
Submitted 5 November, 2014;
originally announced November 2014.
-
Local structure of Fe impurity atoms in ZnO: bulk versus surface
Authors:
J. A. McLeod,
D. W. Boukhvalov,
D. A. Zatsepin,
R. J. Green,
B. Leedahl,
L. Cui,
E. Z. Kurmaev,
I. S. Zhidkov,
L. D. Finkelstein,
N. V. Gavrilov,
S. O. Cholakh,
A. Moewes
Abstract:
By studying Fe-doped ZnO pellets and thin films with various x-ray spectroscopic techniques, and complementing this with density functional theory calculations, we find that Fe-doping in bulk ZnO induces isovalent (and isostructural) cation substitution (Fe2+ -> Zn2+). In contrast to this, Fe-doping near the surface produces both isovalent and heterovalent substitution (Fe3+ -> Zn2+). The calculat…
▽ More
By studying Fe-doped ZnO pellets and thin films with various x-ray spectroscopic techniques, and complementing this with density functional theory calculations, we find that Fe-doping in bulk ZnO induces isovalent (and isostructural) cation substitution (Fe2+ -> Zn2+). In contrast to this, Fe-doping near the surface produces both isovalent and heterovalent substitution (Fe3+ -> Zn2+). The calculations performed herein suggest that the most likely defect structure is the single or double substitution of Zn with Fe, although, if additional oxygen is available, then Fe substitution with interstitial oxygen is even more energetically favourable. Furthermore, it is found that ferromagnetic states are energetically unfavourable, and ferromagnetic ordering is likely to be realized only through the formation of a secondary phase (i.e. ZnFe2O4), or codoping with Cu.
△ Less
Submitted 16 February, 2014;
originally announced February 2014.
-
Structural defects induced by Fe-ion implantation in TiO2
Authors:
B. Leedahl,
D. A. Zatsepin,
D. W. Boukhvalov,
R. J. Green,
J. A. McLeod,
S. S. Kim,
E. Z. Kurmaev,
I. S. Zhidkov,
N. V. Gavrilov,
S. O. Cholakh,
A. Moewes
Abstract:
X-ray photoelectron spectroscopy (XPS) and resonant x-ray emission spectroscopy (RXES) measurements of pellet and thin film forms of TiO$_2$ with implanted Fe ions are presented and discussed. The findings indicate that Fe-implantation in a TiO$_2$ pellet sample induces heterovalent cation substitution (Fe$^{2+}\rightarrow$ Ti$^{4+}$) beneath the surface region. But in thin film samples, the clust…
▽ More
X-ray photoelectron spectroscopy (XPS) and resonant x-ray emission spectroscopy (RXES) measurements of pellet and thin film forms of TiO$_2$ with implanted Fe ions are presented and discussed. The findings indicate that Fe-implantation in a TiO$_2$ pellet sample induces heterovalent cation substitution (Fe$^{2+}\rightarrow$ Ti$^{4+}$) beneath the surface region. But in thin film samples, the clustering of Fe atoms is primarily detected. In addition to this, significant amounts of secondary phases of Fe$^{3+}$ are detected on the surface of all doped samples due to oxygen exposure. These experimental findings are compared with density functional theory (DFT) calculations of formation energies for different configurations of structural defects in the implanted TiO$_2$:Fe system. According to our calculations, the clustering of Fe-atoms in TiO$_2$:Fe thin films can be attributed to the formation of combined substitutional and interstitial defects. Further, the differences due to Fe doping in pellet and thin film samples can ultimately be attributed to different surface to volume ratios.
△ Less
Submitted 1 February, 2014;
originally announced February 2014.