-
Crystal Structure and Magnetism of Actinide Oxides: A Review
Authors:
Binod K. Rai,
Alex Bretana,
Gregory Morrison,
Ryan Greer,
Krzysztof Gofryk,
Hans-Conrad zur Loye
Abstract:
In actinide systems, the 5f electrons experience a uniquely delicate balance of effects and interactions having similar energy scales, which are often difficult to properly disentangle. This interplay of factors such as the dual nature of 5f-states, strong electronic correlations, and strong spin-orbit coupling results in electronically unusual and intriguing behavior such as multi-k antiferromagn…
▽ More
In actinide systems, the 5f electrons experience a uniquely delicate balance of effects and interactions having similar energy scales, which are often difficult to properly disentangle. This interplay of factors such as the dual nature of 5f-states, strong electronic correlations, and strong spin-orbit coupling results in electronically unusual and intriguing behavior such as multi-k antiferromagnetic ordering, multipolar ordering, mott-physics, mixed valence configurations, and more. Despite the inherent allure of their exotic properties, the exploratory science of even the more basic, binary systems like the actinide oxides has been limited due to their toxicity, radioactivity, and reactivity. In this article, we provide an overview of the available synthesis techniques for selected binary actinide oxides, including the actinide dioxides, sesquioxides, and a selection of higher oxides. For these oxides, we also review and evaluate the current state of knowledge of their crystal structures and magnetic properties. In many aspects, substantial knowledge gaps exist in the current body of research on actinide oxides related to understanding their electronic ground states. Bridging these gaps is vital for improving not only a fundamental understanding of these systems but also of future nuclear technologies. To this end, we note the experimental techniques and necessary future investigations which may aid in better elucidating the nature of these fascinating systems.
△ Less
Submitted 3 March, 2024;
originally announced March 2024.
-
Nanofibril-mediated Fracture Resistance of Bone
Authors:
Ottman A. Tertuliano,
Bryce W. Edwards,
Lucas R. Meza,
Vikram S. Deshpande,
Julia R. Greer
Abstract:
Natural hard composites like human bone possess a combination of strength and toughness that exceeds that of their constituents and of many engineered composites. This augmentation is attributed to their complex hierarchical structure, spanning multiple length scales; in bone, characteristic dimensions range from nanoscale fibrils to microscale lamellae to mesoscale osteons and macroscale organs.…
▽ More
Natural hard composites like human bone possess a combination of strength and toughness that exceeds that of their constituents and of many engineered composites. This augmentation is attributed to their complex hierarchical structure, spanning multiple length scales; in bone, characteristic dimensions range from nanoscale fibrils to microscale lamellae to mesoscale osteons and macroscale organs. The mechanical properties of bone have been studied, with the understanding that the isolated microstructure at micro- and nano-scales gives rise to superior strength compared to that of whole tissue, and the tissue possesses an amplified toughness relative to that of its nanoscale constituents. Nanoscale toughening mechanisms of bone are not adequately understood at sample dimensions that allow for isolating salient microstructural features, because of the challenge of performing fracture experiments on small-sized samples. We developed an in-situ three-point bend experimental methodology that probes site-specific fracture behavior of micron-sized specimens of hard material. Using this, we quantify crack initiation and growth toughness of human trabecular bone with sharp fatigue pre-cracks and blunt notches. Our findings indicate that bone with fatigue cracks is two times tougher than that with blunt cracks. In-situ data-correlated electron microscopy videos reveal this behavior arises from crack-bridging by nanoscale fibril structure. The results reveal a transition between fibril-bridging (~1 $μ$m) and crack deflection/twist (~500 $μ$m) as a function of length-scale, and quantitatively demonstrate hierarchy-induced toughening in a complex material. This versatile approach enables quantifying the relationship between toughness and microstructure in various complex material systems and provides direct insight for designing biomimetic composites.
△ Less
Submitted 23 August, 2020;
originally announced August 2020.
-
Yield precursor dislocation avalanches in small crystals: the irreversibility transition
Authors:
Xiaoyue Ni,
Haolu Zhang,
Danilo B. Liarte,
Louis W. McFaul,
Karin A. Dahmen,
James P. Sethna,
Julia R. Greer
Abstract:
The transition from elastic to plastic deformation in crystalline metals shares history dependence and scale-invariant avalanche signature with other non-equilibrium systems under external loading: dilute colloidal suspensions, plastically-deformed amorphous solids, granular materials, and dislocation-based simulations of crystals. These other systems exhibit transitions with clear analogies to wo…
▽ More
The transition from elastic to plastic deformation in crystalline metals shares history dependence and scale-invariant avalanche signature with other non-equilibrium systems under external loading: dilute colloidal suspensions, plastically-deformed amorphous solids, granular materials, and dislocation-based simulations of crystals. These other systems exhibit transitions with clear analogies to work hardening and yield stress, with many typically undergoing purely elastic behavior only after 'training' through repeated cyclic loading; studies in these other systems show a power law scaling of the hysteresis loop extent and of the training time as the peak load approaches a so-called reversible-irreversible transition (RIT). We discover here that deformation of small crystals shares these key characteristics: yielding and hysteresis in uniaxial compression experiments of single-crystalline Cu nano- and micro-pillars decay under repeated cyclic loading. The amplitude and decay time of the yield precursor avalanches diverge as the peak stress approaches failure stress for each pillar, with a power law scaling virtually equivalent to RITs in other nonequilibrium systems.
△ Less
Submitted 19 June, 2019; v1 submitted 12 February, 2018;
originally announced February 2018.
-
Probing microplasticity in small scale FCC crystals via Dynamic Mechanical Analysis
Authors:
Xiaoyue Ni,
Stefanos Papanikolaou,
Gabriele Vajente,
Rana X Adhikari,
Julia R. Greer
Abstract:
In small-scale metallic systems, collective dislocation activity has been correlated with size effects in strength and with a step-like plastic response under uniaxial compression and tension. Yielding and plastic flow in these samples is often accompanied by the emergence of multiple dislocation avalanches. Dislocations might be active pre-yield, but their activity typically cannot be discerned b…
▽ More
In small-scale metallic systems, collective dislocation activity has been correlated with size effects in strength and with a step-like plastic response under uniaxial compression and tension. Yielding and plastic flow in these samples is often accompanied by the emergence of multiple dislocation avalanches. Dislocations might be active pre-yield, but their activity typically cannot be discerned because of the inherent instrumental noise in detecting equipment. We apply Alternate Current (AC) load perturbations via Dynamic Mechanical Analysis (DMA) during quasi-static uniaxial compression experiments on single crystalline Cu nano-pillars with diameters of 500 nm, and compute dynamic moduli at frequencies 0.1, 0.3, 1, and 10 Hz under progressively higher static loads until yielding. By tracking the collective aspects of the oscillatory stress-strain-time series in multiple samples, we observe an evolving dissipative component of the dislocation network response that signifies the transition from elastic behavior to dislocation avalanches in the globally pre-yield regime. We postulate that microplasticity, which is associated with the combination of dislocation avalanches and slow viscoplastic relaxations, is the cause of the dependency of dynamic modulus on the driving rate and the quasi-static stress. We construct a continuum mesoscopic dislocation dynamics model to compute the frequency response of stress over strain and obtain a consistent agreement with experimental observations. The results of our experiments and simulations present a pathway to discern and quantify correlated dislocation activity in the pre-yield regime of deforming crystals.
△ Less
Submitted 28 December, 2016;
originally announced December 2016.
-
Deformation of crystals: Connections with statistical physics
Authors:
James P. Sethna,
Matthew K. Bierbaum,
Karin A. Dahmen,
Carl P. Goodrich,
Julia R. Greer,
Lorien X. Hayden,
Jaron P. Kent-Dobias,
Edward D. Lee,
Danilo B. Liarte,
Xiaoyue Ni,
Katherine N. Quinn,
Archishman Raju,
D. Zeb Rocklin,
Ashivni Shekhawat,
Stefano Zapperi
Abstract:
We give a bird's-eye view of the plastic deformation of crystals aimed at the statistical physics community, and a broad introduction into the statistical theories of forced rigid systems aimed at the plasticity community. Memory effects in magnets, spin glasses, charge density waves, and dilute colloidal suspensions are discussed in relation to the onset of plastic yielding in crystals. Dislocati…
▽ More
We give a bird's-eye view of the plastic deformation of crystals aimed at the statistical physics community, and a broad introduction into the statistical theories of forced rigid systems aimed at the plasticity community. Memory effects in magnets, spin glasses, charge density waves, and dilute colloidal suspensions are discussed in relation to the onset of plastic yielding in crystals. Dislocation avalanches and complex dislocation tangles are discussed via a brief introduction to the renormalization group and scaling. Analogies to emergent scale invariance in fracture, jamming, coarsening, and a variety of depinning transitions are explored. Dislocation dynamics in crystals challenges non equilibrium statistical physics. Statistical physics provides both cautionary tales of subtle memory effects in nonequilibrium systems, and systematic tools designed to address complex scale-invariant behavior on multiple length and time scales.
△ Less
Submitted 17 November, 2016; v1 submitted 19 September, 2016;
originally announced September 2016.
-
Enhanced strength and temperature dependence of mechanical properties of Li at small length scales and its implications for Li metal anodes
Authors:
Chen Xu,
Zeeshan Ahmad,
Asghar Aryanfar,
Venkatasubramanian Viswanathan,
Julia R. Greer
Abstract:
Most next-generation Li-ion battery chemistries require a functioning lithium metal (Li) anode. However, its application in secondary batteries has been inhibited because of uncontrollable dendrite growth during cycling. Mechanical suppression of dendrite growth through solid polymer electrolytes (SPE) or through robust separators has shown the most potential for alleviating this problem. Studies…
▽ More
Most next-generation Li-ion battery chemistries require a functioning lithium metal (Li) anode. However, its application in secondary batteries has been inhibited because of uncontrollable dendrite growth during cycling. Mechanical suppression of dendrite growth through solid polymer electrolytes (SPE) or through robust separators has shown the most potential for alleviating this problem. Studies of the mechanical behavior of Li at any length scale and temperature are virtually non-existent because of its extreme reactivity, which renders sample preparation, transfer, microstructure characterization and mechanical testing prohibitively challenging. We conduct nano-mechanical experiments in an in-situ Scanning Electron Microscope and show that micron-sized Li attains extremely high strengths of 105 MPa at room temperature and of 35MPa at 90$^\circ$C. We demonstrate that single crystalline Li exhibits a power-law size-effect at the micron- and sub-micron length scales, with the strengthening exponent of -0.68 at room temperature and of -1.00 at 90$^\circ$C. We also report the elastic and shear moduli as a function of crystallographic orientation gleaned from experiments and first principles calculations, which show a high level of anisotropy up to the melting point, where the elastic and shear moduli vary by a factor of ~4 between the stiffest and most compliant orientations. The emergence of such high strengths in small-scale Li and sensitivity of this metal's stiffness to crystallographic orientation help explain why the existing methods of dendrite suppression have been mainly unsuccessful and have significant implications for practical design of future-generation batteries.
△ Less
Submitted 18 June, 2016;
originally announced June 2016.
-
Ordering and dimensional crossovers in metallic glasses and liquids
Authors:
David Z. Chen,
Qi An,
William. A. Goddard III,
Julia R. Greer
Abstract:
The atomic-level structures of liquids and glasses are amorphous, lacking long-range order. We characterize the atomic structures by integrating radial distribution functions (RDF) from molecular dynamics (MD) simulations for several metallic liquids and glasses: Cu46Zr54, Ni80Al20, Ni33.3Zr66.7, and Pd82Si18. Resulting cumulative coordination numbers (CN) show that metallic liquids have a dimensi…
▽ More
The atomic-level structures of liquids and glasses are amorphous, lacking long-range order. We characterize the atomic structures by integrating radial distribution functions (RDF) from molecular dynamics (MD) simulations for several metallic liquids and glasses: Cu46Zr54, Ni80Al20, Ni33.3Zr66.7, and Pd82Si18. Resulting cumulative coordination numbers (CN) show that metallic liquids have a dimension of d = 2.55 +/- 0.06 from the center atom to the first coordination shell and metallic glasses have d = 2.71 +/- 0.04, both less than 3. Between the first and second coordination shells, both phases crossover to a dimension of d = 3, as for a crystal. Observations from discrete atom center-of-mass position counting are corroborated by continuously counting Cu glass- and liquid-phase atoms on an artificial grid, which accounts for the occupied atomic volume. Results from Cu grid analysis show short-range d = 2.65 for Cu liquid and d = 2.76 for Cu glass. Cu grid structures crossover to d = 3 at ξ~8 Å (~3 atomic diameters). We study the evolution of local structural dimensions during quenching and discuss its correlation with the glass transition phenomenon.
△ Less
Submitted 9 January, 2017; v1 submitted 8 January, 2016;
originally announced January 2016.
-
Flaw-driven Failure in Nanostructures
Authors:
X. Wendy Gu,
Zhaoxuan Wu,
Yong-Wei Zhang,
David J. Srolovitz,
Julia R. Greer
Abstract:
Understanding failure in nanomaterials is critical for the design of reliable structural materials and small-scale devices that have components or microstructural elements at the nanometer length scale. No consensus exists on the effect of flaws on fracture in bulk nanostructured materials or in nanostructures. Proposed theories include nanoscale flaw tolerance and maintaining macroscopic fracture…
▽ More
Understanding failure in nanomaterials is critical for the design of reliable structural materials and small-scale devices that have components or microstructural elements at the nanometer length scale. No consensus exists on the effect of flaws on fracture in bulk nanostructured materials or in nanostructures. Proposed theories include nanoscale flaw tolerance and maintaining macroscopic fracture relationships at the nanoscale with virtually no experimental support. We explore fracture mechanisms in nanomaterials via nanomechanical experiments on nanostructures with pre-fabricated surface flaws in combination with molecular dynamics simulations. Nanocrystalline Pt cylinders with diameters of 120 nm with intentionally introduced surface notches were created using a template-assisted electroplating method and tested in uniaxial tension in in-situ SEM. Experiments demonstrate that 8 out of 12 samples failed at the notches and that tensile failure strengths were 1.8 GPa regardless of whether failure occurred at or away from the flaw. These findings suggest that failure location was sensitive to the presence of flaws, while strength was flaw-insensitive. Molecular dynamics simulations support these observations and show that incipient plastic deformation commences via nucleation and motion of dislocations in concert with grain boundary sliding. We postulate that such local plasticity reduces stress concentration ahead of the flaw to levels comparable with the strengths of intrinsic microstructural features like grain boundary triple junctions, a phenomenon unique to nano-scale solids that contain an internal microstructural energy landscape. This mechanism causes failure to occur at the weakest link, be it an internal inhomogeneity or a surface feature with a high local stress.
△ Less
Submitted 11 July, 2013;
originally announced July 2013.
-
Strain rate effects in the mechanical response of polymer anchored carbon nanotube foams
Authors:
A. Misra,
J. R. Greer,
C. Daraio
Abstract:
Super-compressible foam-like carbon nanotube films have been reported to exhibit highly nonlinear viscoelastic behaviour in compression similar to soft tissue. Their unique combination of light weight and exceptional electrical, thermal and mechanical properties have helped identify them as viable building blocks for more complex nanosystems and as stand-alone structures for a variety of differe…
▽ More
Super-compressible foam-like carbon nanotube films have been reported to exhibit highly nonlinear viscoelastic behaviour in compression similar to soft tissue. Their unique combination of light weight and exceptional electrical, thermal and mechanical properties have helped identify them as viable building blocks for more complex nanosystems and as stand-alone structures for a variety of different applications. In the as-grown state, their mechanical performance is limited by the weak adhesion between the tubes, controlled by the van der Waals forces, and the substrate allowing the forests to split easily and to have low resistance in shear. Under axial compression loading carbon nanotubes have demonstrated bending, buckling8 and fracture9 (or a combination of the above) depending on the loading conditions and on the number of loading cycles. In this work, we partially anchor dense vertically aligned foam-like forests of carbon nanotubes on a thin, flexible polymer layer to provide structural stability, and report the mechanical response of such systems as a function of the strain rate. We test the sample under quasi-static indentation loading and under impact loading and report a variable nonlinear response and different elastic recovery with varying strain rates. A Bauschinger-like effect is observed at very low strain rates while buckling and the formation of permanent defects in the tube structure is reported at very high strain rates. Using high-resolution transmission microscopy
△ Less
Submitted 5 April, 2008;
originally announced April 2008.
