-
Micromechanical origin of plasticity and hysteresis in nest-like packings
Authors:
Yashraj Bhosale,
Nicholas Weiner,
Alex Butler,
Seung Hyun Kim,
Mattia Gazzola,
Hunter King
Abstract:
Disordered packings of unbonded, semiflexible fibers represent a class of materials spanning contexts and scales. From twig-based bird nests to unwoven textiles, bulk mechanics of disparate systems emerge from the bending of constituent slender elements about impermanent contacts. In experimental and computational packings of wooden sticks, we identify prominent features of their response to cycli…
▽ More
Disordered packings of unbonded, semiflexible fibers represent a class of materials spanning contexts and scales. From twig-based bird nests to unwoven textiles, bulk mechanics of disparate systems emerge from the bending of constituent slender elements about impermanent contacts. In experimental and computational packings of wooden sticks, we identify prominent features of their response to cyclic oedometric compression: non-linear stiffness, transient plasticity, and eventually repeatable velocity-independent hysteresis. We trace these features to their micromechanic origins, identified in characteristic appearance, disappearance, and displacement of internal contacts.
△ Less
Submitted 1 December, 2021;
originally announced December 2021.
-
Adhesive forces inhibit underwater contact formation for a soft-hard collision
Authors:
Mengyue Sun1,
Nityanshu Kumar1,
Ali Dhinojwala,
Hunter King
Abstract:
Thermodynamics tells us to expect underwater contact between two hydrophobic surfaces to result in stronger adhesion compared to two hydrophilic surfaces. However, presence of water changes not only energetics, but also the dynamic process of reaching a final state, which couples solid deformation and liquid evacuation. These dynamics can create challenges for achieving strong underwater adhesion/…
▽ More
Thermodynamics tells us to expect underwater contact between two hydrophobic surfaces to result in stronger adhesion compared to two hydrophilic surfaces. However, presence of water changes not only energetics, but also the dynamic process of reaching a final state, which couples solid deformation and liquid evacuation. These dynamics can create challenges for achieving strong underwater adhesion/friction, which affects diverse fields including soft robotics, bio-locomotion and tire traction. Closer investigation, requiring sufficiently precise resolution of film evacuation while simultaneously controlling surface wettability has been lacking. We perform high resolution in-situ frustrated total internal reflection imaging to track underwater contact evolution between soft-elastic hemispheres of varying stiffness and smooth-hard surfaces of varying wettability. Surprisingly, we find exponential rate of water evacuation from hydrophobic-hydrophobic (adhesive) contact is 3 orders of magnitude lower than that from hydrophobic-hydrophilic (non-adhesive) contact. The trend of decreasing rate with decreasing wettability of glass sharply changes about a point where thermodynamic adhesion crosses zero, suggesting a transition in mode of evacuation, which is illuminated by 3-Dimensional spatiotemporal heightmaps. Adhesive contact is characterized by the early localization of sealed puddles, whereas non-adhesive contact remains smooth, with film-wise evacuation from one central puddle. Measurements with a human thumb and alternatively hydrophobic/hydrophilic glass surface demonstrate practical consequences of the same dynamics: adhesive interactions cause instability in valleys and lead to a state of more trapped water and less intimate solid-solid contact.
△ Less
Submitted 22 February, 2021;
originally announced February 2021.
-
Mechanisms of skyrmion and skyrmion crystal formation from the conical phase
Authors:
Taehoon Kim,
Haijun Zhao,
Ben Xu,
Brandt A Jensen,
Alexander H King,
Matthew J Kramer,
Cewen Nan,
Liqin Ke,
Lin Zhou
Abstract:
Real-space topological magnetic structures such as skyrmions and merons are promising candidates for information storage and transport. However, the microscopic mechanisms that control their formation and evolution are still not clear. Here, using in-situ Lorentz transmission electron microscopy, we demonstrate that skyrmion crystals (SkXs) can nucleate, grow, and evolve from the conical phase in…
▽ More
Real-space topological magnetic structures such as skyrmions and merons are promising candidates for information storage and transport. However, the microscopic mechanisms that control their formation and evolution are still not clear. Here, using in-situ Lorentz transmission electron microscopy, we demonstrate that skyrmion crystals (SkXs) can nucleate, grow, and evolve from the conical phase in the same ways that real nanocrystals form from vapors or solutions. More intriguingly, individual skyrmions can also "reproduce" by division in a mitosis-like process that allows them to annihilate SkX lattice imperfections, which is not available to crystals made of mass-conserving particles. Combined string method and micromagnetic calculations show that competition between repulsive and attractive interactions between skyrmions governs particle-like SkX growth, but non-conservative SkX growth appears to be defect-mediated. Our results provide insights towards manipulating magnetic topological states by applying established crystal growth theory, adapted to account for the new process of skyrmion mitosis.
△ Less
Submitted 6 December, 2019;
originally announced December 2019.
-
Perspective: Mechanics of randomly packed filaments -- the `bird nest' as meta-material
Authors:
Nicholas Weiner,
Yashraj Bhosale,
Mattia Gazzola,
Hunter King
Abstract:
Systems of randomly packed, macroscopic elements, from jammed spherical grains to tangled long filaments, represent a broad class of disordered meta-materials with a wide range of applications and manifestations in nature. A `bird nest' presents itself at an interface between hard round grains described by granular physics to long soft filaments, the center of textile material science. All of thes…
▽ More
Systems of randomly packed, macroscopic elements, from jammed spherical grains to tangled long filaments, represent a broad class of disordered meta-materials with a wide range of applications and manifestations in nature. A `bird nest' presents itself at an interface between hard round grains described by granular physics to long soft filaments, the center of textile material science. All of these randomly packed systems exhibit forms of self assembly, evident through their robust packing statistics, and a common, unusual elastoplastic response to oedometric compression. In reviewing packing statistics, mechanical response characterization and consideration of boundary effects, we present a perspective that attempts to establish a link between the bulk and local behaviour of a pile of sand and a wad of cotton, demonstrating the nest's relationship with each. Finally, potential directions for impactful applications are outlined.
△ Less
Submitted 31 October, 2019;
originally announced November 2019.
-
Effects of Grain Boundary Disorder on Yield Strength
Authors:
Valery Borovikov,
Mikhail I. Mendelev,
Alexander H. King
Abstract:
It was recently reported that segregation of Zr to grain boundaries (GB) in nanocrystalline Cu can lead to the formation of disordered intergranular films [1,2]. In this study we employ atomistic computer simulations to study how the formation of these films affects the dislocation nucleation from the GBs. We found that full disorder of the grain boundary structure leads to the suppression of disl…
▽ More
It was recently reported that segregation of Zr to grain boundaries (GB) in nanocrystalline Cu can lead to the formation of disordered intergranular films [1,2]. In this study we employ atomistic computer simulations to study how the formation of these films affects the dislocation nucleation from the GBs. We found that full disorder of the grain boundary structure leads to the suppression of dislocation emission and significant increase of the yield stress. Depending on the solute concentration and heat-treatment, however, a partial disorder may also occur and this aids dislocation nucleation rather than suppressing it, resulting in elimination of the strengthening effect.
△ Less
Submitted 22 February, 2018;
originally announced February 2018.
-
Effect of Ag and Zr solutes on dislocation emission from the Σ11(332)[110] symmetric tilt grain boundary in fcc Cu
Authors:
Valery Borovikov,
Mikhail I. Mendelev,
Alexander H. King
Abstract:
Addition of solutes is commonly used to stabilize nanocrystalline materials against grain growth. However, segregating at grain boundaries, these solutes also affect the process of dislocation nucleation from grain boundaries under applied stress. Using atomistic simulations we demonstrate that the effect of solutes on the dislocation nucleation strongly depends on the distribution of solutes at t…
▽ More
Addition of solutes is commonly used to stabilize nanocrystalline materials against grain growth. However, segregating at grain boundaries, these solutes also affect the process of dislocation nucleation from grain boundaries under applied stress. Using atomistic simulations we demonstrate that the effect of solutes on the dislocation nucleation strongly depends on the distribution of solutes at the grain boundary, which can vary dramatically depending on the solute type. In particular, our results indicate that the solutes with a smaller size mismatch can be more effective in suppressing dislocation emission from grain boundaries. Bearing in mind that dislocation slip originating from grain boundaries or their triple junctions is the dominant mechanism of plastic deformation when grain sizes are reduced to the nanoscale, we emphasize the importance of the search for the optimal solute additions, which would stabilize the nanocrystalline material against grain growth and, at the same time, effectively suppress the dislocation nucleation from the grain boundaries.
△ Less
Submitted 20 December, 2017;
originally announced December 2017.
-
Solute effects on interfacial dislocation emission in nanomaterials: nucleation site competition and neutralization
Authors:
Valery Borovikov,
Mikhail I. Mendelev,
Alexander H. King
Abstract:
Interfacial nucleation is the dominant process of dislocation generation during the plastic deformation of nano-crystalline materials. Solute additions intended to stabilize nano-crystalline metals against grain growth, may segregate to the grain boundaries and triple junctions where they can affect the process of the dislocation emission. In this Letter we demonstrate that the effect of solute ad…
▽ More
Interfacial nucleation is the dominant process of dislocation generation during the plastic deformation of nano-crystalline materials. Solute additions intended to stabilize nano-crystalline metals against grain growth, may segregate to the grain boundaries and triple junctions where they can affect the process of the dislocation emission. In this Letter we demonstrate that the effect of solute addition in a nano-crystalline material containing competing solute segregation sites and dislocation sources can be very complex due to different rates of segregation at different interfaces. Moreover, at large concentrations, when the solutes form clusters near the grain boundaries or triple junctions, the interfaces between these clusters and the matrix can introduce new dislocation emission sources, which can be activated under lower applied stress. Thus, the strength maximum can occur at a certain solute concentration: adding solutes beyond this optimal solute concentration can reduce the strength of the material.
△ Less
Submitted 25 October, 2017;
originally announced October 2017.
-
Effect of Stacking Fault Energy on Mechanism of Plastic Deformation in Nanotwinned FCC Metals
Authors:
Valery Borovikov,
Mikhail I. Mendelev,
Alexander H. King,
Richard LeSar
Abstract:
Starting from a semi-empirical potential designed for Cu, we developed a series of potentials that provide essentially constant values of all significant (calculated) materials properties except for the intrinsic stacking fault energy, which varies over a range that encompasses the lowest and highest values observed in nature. These potentials were employed in molecular dynamics (MD) simulations t…
▽ More
Starting from a semi-empirical potential designed for Cu, we developed a series of potentials that provide essentially constant values of all significant (calculated) materials properties except for the intrinsic stacking fault energy, which varies over a range that encompasses the lowest and highest values observed in nature. These potentials were employed in molecular dynamics (MD) simulations to investigate how stacking fault energy affects the mechanical behavior of nanotwinned face-centered cubic (fcc) materials. The results indicate that properties such as yield strength and microstructural stability do not vary systematically with stacking fault energy, but rather fall into two distinct regimes corresponding to low and high stacking fault energies.
△ Less
Submitted 25 January, 2015;
originally announced January 2015.
-
Inelastic impact of a sphere on a massive plane: nonmonotonic velocity-dependence of the restitution coefficient
Authors:
Hunter King,
Ryan White,
Iva Maxwell,
Narayanan Menon
Abstract:
We have studied the coefficient of restitution, $η$, in normal collisions of a non-rotating sphere on a massive plate for a range of material parameters, impact velocity and sphere size. The measured coefficient of restitution does not monotonically vary with velocity. This effect is due to dynamics that occur during the finite duration of impact: the contact time varies as a function of velocit…
▽ More
We have studied the coefficient of restitution, $η$, in normal collisions of a non-rotating sphere on a massive plate for a range of material parameters, impact velocity and sphere size. The measured coefficient of restitution does not monotonically vary with velocity. This effect is due to dynamics that occur during the finite duration of impact: the contact time varies as a function of velocity is comparable to the time-scales of the vibrational modes of the plate. The measured effect is robust and is expected to be ubiquitous in fluidized granular media. We also find that $η$ is a decreasing function of particle size, a dependence that is not captured by existing models of impact.
△ Less
Submitted 20 September, 2002;
originally announced September 2002.
-
Impurity mediated nucleation in hexadecane-in-water emulsions
Authors:
Amy Herhold,
Deniz Ertas,
Alex J. Levine,
H. E. King Jr
Abstract:
We report detailed nucleation studies on the liquid-to-solid transition of hexadecane using nearly monodisperse hexadecane-in-water emulsions. A careful consideration of the kinetics of isothermal and nonisothermal freezing show deviations from predictions of classical nucleation theory, if one assumes that the emulsion droplet population is homogeneous. Similar deviations have been observed pre…
▽ More
We report detailed nucleation studies on the liquid-to-solid transition of hexadecane using nearly monodisperse hexadecane-in-water emulsions. A careful consideration of the kinetics of isothermal and nonisothermal freezing show deviations from predictions of classical nucleation theory, if one assumes that the emulsion droplet population is homogeneous. Similar deviations have been observed previously. As an explanation, we propose a novel argument based on the dynamic generation of droplet heterogeneity mediated by mobile impurities. This proposal is in excellent agreement with existing data.
△ Less
Submitted 6 November, 1998;
originally announced November 1998.
