-
Immersive Virtual Reality and Robotics for Upper Extremity Rehabilitation
Authors:
Vuthea Chheang,
Rakshith Lokesh,
Amit Chaudhari,
Qile Wang,
Lauren Baron,
Behdokht Kiafar,
Sagar Doshi,
Erik Thostenson,
Joshua Cashaback,
Roghayeh Leila Barmaki
Abstract:
Stroke patients often experience upper limb impairments that restrict their mobility and daily activities. Physical therapy (PT) is the most effective method to improve impairments, but low patient adherence and participation in PT exercises pose significant challenges. To overcome these barriers, a combination of virtual reality (VR) and robotics in PT is promising. However, few systems effective…
▽ More
Stroke patients often experience upper limb impairments that restrict their mobility and daily activities. Physical therapy (PT) is the most effective method to improve impairments, but low patient adherence and participation in PT exercises pose significant challenges. To overcome these barriers, a combination of virtual reality (VR) and robotics in PT is promising. However, few systems effectively integrate VR with robotics, especially for upper limb rehabilitation. This work introduces a new virtual rehabilitation solution that combines VR with robotics and a wearable sensor to analyze elbow joint movements. The framework also enhances the capabilities of a traditional robotic device (KinArm) used for motor dysfunction assessment and rehabilitation. A pilot user study (n = 16) was conducted to evaluate the effectiveness and usability of the proposed VR framework. We used a two-way repeated measures experimental design where participants performed two tasks (Circle and Diamond) with two conditions (VR and VR KinArm). We observed no significant differences in the main effect of conditions for task completion time. However, there were significant differences in both the normalized number of mistakes and recorded elbow joint angles (captured as resistance change values from the wearable sleeve sensor) between the Circle and Diamond tasks. Additionally, we report the system usability, task load, and presence in the proposed VR framework. This system demonstrates the potential advantages of an immersive, multi-sensory approach and provides future avenues for research in developing more cost-effective, tailored, and personalized upper limb solutions for home therapy applications.
△ Less
Submitted 29 June, 2023; v1 submitted 21 April, 2023;
originally announced April 2023.
-
Virtual Therapy Exergame for Upper Extremity Rehabilitation Using Smart Wearable Sensors
Authors:
Lauren Baron,
Vuthea Chheang,
Amit Chaudhari,
Arooj Liaqat,
Aishwarya Chandrasekaran,
Yufan Wang,
Joshua Cashaback,
Erik Thostenson,
Roghayeh Leila Barmaki
Abstract:
Virtual Reality (VR) has been utilized for several applications and has shown great potential for rehabilitation, especially for home therapy. However, these systems solely rely on information from VR hand controllers, which do not fully capture the individual movement of the joints. In this paper, we propose a creative VR therapy exergame for upper extremity rehabilitation using multi-dimensional…
▽ More
Virtual Reality (VR) has been utilized for several applications and has shown great potential for rehabilitation, especially for home therapy. However, these systems solely rely on information from VR hand controllers, which do not fully capture the individual movement of the joints. In this paper, we propose a creative VR therapy exergame for upper extremity rehabilitation using multi-dimensional reaching tasks while simultaneously capturing hand movement from the VR controllers and elbow joint movement from a flexible carbon nanotube sleeve. We conducted a preliminary study with non-clinical participants (n = 12, 7 F). In a 2x2 within-subjects study (orientation (vertical, horizontal) x configuration (flat, curved)), we evaluated the effectiveness and enjoyment of the exergame in different study conditions. The results show that there was a statistically significant difference in terms of task completion time between the two orientations. However, no significant differences were found in the number of mistakes in both orientation and configuration of the virtual exergame. This can lead to customizing therapy while maintaining the same level of intensity. That is, if a patient has restricted lower limb mobility and requires to be seated, they can use the orientations interchangeably. The results of resistance change generated from the carbon nanotube sleeve revealed that the flat configuration in the vertical orientation induced more elbow stretches than the other conditions. Finally, we reported the subjective measures based on questionnaires for usability and user experience in different study conditions. In conclusion, the proposed VR exergame has the potential as a multimodal sensory tool for personalized upper extremity home-based therapy and telerehabilitation.
△ Less
Submitted 16 February, 2023;
originally announced February 2023.
-
When Virtual Therapy and Art Meet: A Case Study of Creative Drawing Game in Virtual Environments
Authors:
Lauren Baron,
Brian Cohn,
Roghayeh Barmaki
Abstract:
There have been a resurge lately on virtual therapy and other virtual- and tele-medicine services due to the new normal of practicing 'shelter at home'. In this paper, we propose a creative drawing game for virtual therapy and investigate user's comfort and movement freedom in a pilot study. In a mixed-design study, healthy participants (N=16, 8 females) completed one of the easy or hard trajector…
▽ More
There have been a resurge lately on virtual therapy and other virtual- and tele-medicine services due to the new normal of practicing 'shelter at home'. In this paper, we propose a creative drawing game for virtual therapy and investigate user's comfort and movement freedom in a pilot study. In a mixed-design study, healthy participants (N=16, 8 females) completed one of the easy or hard trajectories of the virtual therapy game in standing and seated arrangements using a virtual-reality headset. The results from participants' movement accuracy, task completion time, and usability questionnaires indicate that participants had significant performance differences on two levels of the game based on its difficulty (between-subjects factor), but no difference in seated and standing configurations (within-subjects factor). Also, the hard mode was more favorable among participants. This work offers implications on virtual reality and 3D-interactive systems, with specific contributions to virtual therapy, and serious games for healthcare applications.
△ Less
Submitted 15 October, 2020;
originally announced October 2020.
-
A Fuzzy-based Framework to Support Multicriteria Design of Mechatronic Systems
Authors:
Abolfazl Mohebbi,
Sofiane Achiche,
Luc Baron
Abstract:
Designing a mechatronic system is a complex task since it deals with a high number of system components with multi-disciplinary nature in the presence of interacting design objectives. Currently, the sequential design is widely used by designers in industries that deal with different domains and their corresponding design objectives separately leading to a functional but not necessarily an optimal…
▽ More
Designing a mechatronic system is a complex task since it deals with a high number of system components with multi-disciplinary nature in the presence of interacting design objectives. Currently, the sequential design is widely used by designers in industries that deal with different domains and their corresponding design objectives separately leading to a functional but not necessarily an optimal result. Consequently, the need for a systematic and multi-objective design methodology arises. A new conceptual design approach based on a multi-criteria profile for mechatronic systems has been previously presented by the authors which uses a series of nonlinear fuzzy-based aggregation functions to facilitate decision-making for design evaluation in the presence of interacting criteria. Choquet fuzzy integrals are one of the most expressive and reliable preference models used in decision theory for multicriteria decision making. They perform a weighted aggregation by the means of fuzzy measures assigning a weight to any coalition of criteria. This enables the designers to model importance and also interactions among criteria thus covering an important range of possible decision outcomes. However, specification of the fuzzy measures involves many parameters and is very difficult when only relying on the designer's intuition. In this paper, we discuss three different methods of fuzzy measure identification tailored for a mechatronic design process and exemplified by a case study of designing a vision-guided quadrotor drone. The results obtained from each method are discussed in the end.
△ Less
Submitted 14 June, 2020;
originally announced June 2020.
-
Next generation portal for federated testbeds MySlice v2: from prototype to production
Authors:
Loïc Baron,
Radomir Klacza,
Pauline Gaudet-Chardonnet,
Amira Bradai,
Ciro Scognamiglio,
Serge Fdida
Abstract:
A number of projects in computer science around the world have contributed to build federated experimental facilities providing access to a large set of distributed compute, storage and network resources for the research community. Several tools have been developed to provide users an easy access to the federated testbeds. This paper presents the architecture of the new version of the MySlice web…
▽ More
A number of projects in computer science around the world have contributed to build federated experimental facilities providing access to a large set of distributed compute, storage and network resources for the research community. Several tools have been developed to provide users an easy access to the federated testbeds. This paper presents the architecture of the new version of the MySlice web portal, that has evolved from a prototype to a production ready software.
△ Less
Submitted 12 June, 2018;
originally announced June 2018.
-
Kinematics and workspace analysis of a 3ppps parallel robot with u-shaped base
Authors:
Damien Chablat,
Luc Baron,
Ranjan Jha
Abstract:
This paper presents the kinematic analysis of the 3-PPPS parallel robot with an equilateral mobile platform and a U-shape base. The proposed design and appropriate selection of parameters allow to formulate simpler direct and inverse kinematics for the manipulator under study. The parallel singularities associated with the manipulator depend only on the orientation of the end-effector, and thus de…
▽ More
This paper presents the kinematic analysis of the 3-PPPS parallel robot with an equilateral mobile platform and a U-shape base. The proposed design and appropriate selection of parameters allow to formulate simpler direct and inverse kinematics for the manipulator under study. The parallel singularities associated with the manipulator depend only on the orientation of the end-effector, and thus depend only on the orientation of the end effector. The quaternion parameters are used to represent the aspects, i.e. the singularity free regions of the workspace. A cylindrical algebraic decomposition is used to characterize the workspace and joint space with a low number of cells. The dis-criminant variety is obtained to describe the boundaries of each cell. With these simplifications, the 3-PPPS parallel robot with proposed design can be claimed as the simplest 6 DOF robot, which further makes it useful for the industrial applications.
△ Less
Submitted 16 May, 2017;
originally announced June 2017.