-
Influence Vectors Control for Robots Using Cellular-like Binary Actuators
Authors:
Alexandre Girard,
Jean-Sébastien Plante
Abstract:
Robots using cellular-like redundant binary actuators could outmatch electric-gearmotor robotic systems in terms of reliability, force-to-weight ratio and cost. This paper presents a robust fault tolerant control scheme that is designed to meet the control challenges encountered by such robots, i.e., discrete actuator inputs, complex system modeling and cross-coupling between actuators. In the pro…
▽ More
Robots using cellular-like redundant binary actuators could outmatch electric-gearmotor robotic systems in terms of reliability, force-to-weight ratio and cost. This paper presents a robust fault tolerant control scheme that is designed to meet the control challenges encountered by such robots, i.e., discrete actuator inputs, complex system modeling and cross-coupling between actuators. In the proposed scheme, a desired vectorial system output, such as a position or a force, is commanded by recruiting actuators based on their influence vectors on the output. No analytical model of the system is needed; influence vectors are identified experimentally by sequentially activating each actuator. For position control tasks, the controller uses a probabilistic approach and a genetic algorithm to determine an optimal combination of actuators to recruit. For motion control tasks, the controller uses a sliding mode approach and independent recruiting decision for each actuator. Experimental results on a four degrees of freedom binary manipulator with twenty actuators confirm the method's effectiveness, and its ability to tolerate massive perturbations and numerous actuator failures.
△ Less
Submitted 25 July, 2024;
originally announced July 2024.
-
Time Shift Governor for Constrained Control of Spacecraft Orbit and Attitude Relative Motion in Bicircular Restricted Four-Body Problem
Authors:
Taehyeun Kim,
Ilya Kolmanovsky,
Anouck Girard
Abstract:
This paper considers constrained spacecraft rendezvous and docking (RVD) in the setting of the Bicircular Restricted Four-Body Problem (BCR4BP), while accounting for attitude dynamics. We consider Line of Sight (LoS) cone constraints, thrust limits, thrust direction limits, and approach velocity constraints during RVD missions in a near rectilinear halo orbit (NRHO) in the Sun-Earth-Moon system. T…
▽ More
This paper considers constrained spacecraft rendezvous and docking (RVD) in the setting of the Bicircular Restricted Four-Body Problem (BCR4BP), while accounting for attitude dynamics. We consider Line of Sight (LoS) cone constraints, thrust limits, thrust direction limits, and approach velocity constraints during RVD missions in a near rectilinear halo orbit (NRHO) in the Sun-Earth-Moon system. To enforce the constraints, the Time Shift Governor (TSG), which uses a time-shifted Chief spacecraft trajectory as a target reference for the Deputy spacecraft, is employed. The time shift is gradually reduced to zero so that the virtual target gradually evolves towards the Chief spacecraft as time goes by, and the RVD mission objective can be achieved. Numerical simulation results are reported to validate the proposed control method.
△ Less
Submitted 15 July, 2024;
originally announced July 2024.
-
On Reducing Activity with Distillation and Regularization for Energy Efficient Spiking Neural Networks
Authors:
Thomas Louis,
Benoit Miramond,
Alain Pegatoquet,
Adrien Girard
Abstract:
Interest in spiking neural networks (SNNs) has been growing steadily, promising an energy-efficient alternative to formal neural networks (FNNs), commonly known as artificial neural networks (ANNs). Despite increasing interest, especially for Edge applications, these event-driven neural networks suffered from their difficulty to be trained compared to FNNs. To alleviate this problem, a number of i…
▽ More
Interest in spiking neural networks (SNNs) has been growing steadily, promising an energy-efficient alternative to formal neural networks (FNNs), commonly known as artificial neural networks (ANNs). Despite increasing interest, especially for Edge applications, these event-driven neural networks suffered from their difficulty to be trained compared to FNNs. To alleviate this problem, a number of innovative methods have been developed to provide performance more or less equivalent to that of FNNs. However, the spiking activity of a network during inference is usually not considered. While SNNs may usually have performance comparable to that of FNNs, it is often at the cost of an increase of the network's activity, thus limiting the benefit of using them as a more energy-efficient solution.
In this paper, we propose to leverage Knowledge Distillation (KD) for SNNs training with surrogate gradient descent in order to optimize the trade-off between performance and spiking activity. Then, after understanding why KD led to an increase in sparsity, we also explored Activations regularization and proposed a novel method with Logits Regularization. These approaches, validated on several datasets, clearly show a reduction in network spiking activity (-26.73% on GSC and -14.32% on CIFAR-10) while preserving accuracy.
△ Less
Submitted 26 June, 2024;
originally announced June 2024.
-
Introducing the Biomechanics-Function Relationship in Glaucoma: Improved Visual Field Loss Predictions from intraocular pressure-induced Neural Tissue Strains
Authors:
Thanadet Chuangsuwanich,
Monisha E. Nongpiur,
Fabian A. Braeu,
Tin A. Tun,
Alexandre Thiery,
Shamira Perera,
Ching Lin Ho,
Martin Buist,
George Barbastathis,
Tin Aung,
Michaël J. A. Girard
Abstract:
Objective. (1) To assess whether neural tissue structure and biomechanics could predict functional loss in glaucoma; (2) To evaluate the importance of biomechanics in making such predictions. Design, Setting and Participants. We recruited 238 glaucoma subjects. For one eye of each subject, we imaged the optic nerve head (ONH) using spectral-domain OCT under the following conditions: (1) primary ga…
▽ More
Objective. (1) To assess whether neural tissue structure and biomechanics could predict functional loss in glaucoma; (2) To evaluate the importance of biomechanics in making such predictions. Design, Setting and Participants. We recruited 238 glaucoma subjects. For one eye of each subject, we imaged the optic nerve head (ONH) using spectral-domain OCT under the following conditions: (1) primary gaze and (2) primary gaze with acute IOP elevation. Main Outcomes: We utilized automatic segmentation of optic nerve head (ONH) tissues and digital volume correlation (DVC) analysis to compute intraocular pressure (IOP)-induced neural tissue strains. A robust geometric deep learning approach, known as Point-Net, was employed to predict the full Humphrey 24-2 pattern standard deviation (PSD) maps from ONH structural and biomechanical information. For each point in each PSD map, we predicted whether it exhibited no defect or a PSD value of less than 5%. Predictive performance was evaluated using 5-fold cross-validation and the F1-score. We compared the model's performance with and without the inclusion of IOP-induced strains to assess the impact of biomechanics on prediction accuracy. Results: Integrating biomechanical (IOP-induced neural tissue strains) and structural (tissue morphology and neural tissues thickness) information yielded a significantly better predictive model (F1-score: 0.76+-0.02) across validation subjects, as opposed to relying only on structural information, which resulted in a significantly lower F1-score of 0.71+-0.02 (p < 0.05). Conclusion: Our study has shown that the integration of biomechanical data can significantly improve the accuracy of visual field loss predictions. This highlights the importance of the biomechanics-function relationship in glaucoma, and suggests that biomechanics may serve as a crucial indicator for the development and progression of glaucoma.
△ Less
Submitted 21 June, 2024;
originally announced June 2024.
-
Soft Two-degree-of-freedom Dielectric Elastomer Position Sensor Exhibiting Linear Behavior
Authors:
Alexandre Girard,
Jean-Philippe Lucking Bigué,
Benjamin M. O'Brien,
Todd A. Gisby,
Iain A. Anderson,
Jean-Sébastien Plante
Abstract:
Soft robots could bring robotic systems to new horizons, by enabling safe human-machine interaction. For precise control, these soft structures require high level position feedback that is not easily achieved through conventional one-degree-of-freedom (DOF) sensing apparatus. In this paper, a soft two-DOF dielectric elastomer (DE) sensor is specifically designed to provide accurate position feedba…
▽ More
Soft robots could bring robotic systems to new horizons, by enabling safe human-machine interaction. For precise control, these soft structures require high level position feedback that is not easily achieved through conventional one-degree-of-freedom (DOF) sensing apparatus. In this paper, a soft two-DOF dielectric elastomer (DE) sensor is specifically designed to provide accurate position feedback for a soft polymer robotic manipulator. The technology is exemplified on a soft robot intended for MRI-guided prostate interventions. DEs are chosen for their major advantages of softness, high strains, low cost and embedded multiple-DOF sensing capability, providing excellent system integration. A geometrical model of the proposed DE sensor is developed and compared to experimental results in order to understand sensor mechanics. Using a differential measurement approach, a handmade prototype provided linear sensory behavior and 0.2 mm accuracy on two-DOF. This correlates to a 0.7\% error over the sensor's 30 mm x 30 mm planar range, demonstrating the outstanding potential of DE technology for accurate multi-DOF position sensing.
△ Less
Submitted 27 May, 2024;
originally announced May 2024.
-
A two-speed actuator for robotics with fast seamless gear shifting
Authors:
Alexandre Girard,
H. Harry Asada
Abstract:
This paper present a novel dual-speed actuator adapted to robotics. In many applications, robots have to bear large loads while moving slowly and also have to move quickly through the air with almost no load. This lead to conflicting requirements for their actuators. Multiple gear ratios address this issue by allowing an effective use of power over a wide range of torque-speed load conditions. Fur…
▽ More
This paper present a novel dual-speed actuator adapted to robotics. In many applications, robots have to bear large loads while moving slowly and also have to move quickly through the air with almost no load. This lead to conflicting requirements for their actuators. Multiple gear ratios address this issue by allowing an effective use of power over a wide range of torque-speed load conditions. Furthermore, very different gear ratios also lead to drastic changes of the intrinsic impedance, enabling a non-back-drivable mode for stiff position control and a back-drivable mode for force control. The proposed actuator consists of two electric motors coupled to a differential; one has a large gear ratio while the other is almost direct-drive and equipped with a brake. During the high-force mode the brake is locked, only one motor is used, and the actuator behaves like a regular highly-geared servo-motor. During the high-speed mode the brake is open, both motor are used at the same time, and the actuator behaves like a direct drive motor. A dynamic model is developed and novel controllers are proposed for synergic use of both motors. The redundancy of motors is exploited for maintaining full control of the output during mode transitions, allowing for fast and seamless switching even when interacting with unknown environments. Results are demonstrated with a proof-of-concept linear actuator.
△ Less
Submitted 26 May, 2024;
originally announced May 2024.
-
Leveraging Natural Load Dynamics with Variable Gear-ratio Actuators
Authors:
Alexandre Girard,
H. Harry Asada
Abstract:
This paper presents a robotic system where the gear-ratio of an actuator is dynamically changed to either leverage or attenuate the natural load dynamics. Based on this principle, lightweight robotic systems can be made fast and strong; exploiting the natural load dynamics for moving at higher speeds (small reduction ratio), while also able to bear a large load through the attenuation of the load…
▽ More
This paper presents a robotic system where the gear-ratio of an actuator is dynamically changed to either leverage or attenuate the natural load dynamics. Based on this principle, lightweight robotic systems can be made fast and strong; exploiting the natural load dynamics for moving at higher speeds (small reduction ratio), while also able to bear a large load through the attenuation of the load dynamics (large reduction ratio). A model-based control algorithm to automatically select the optimal gear-ratios that minimize the total actuator torques for an arbitrary dynamic state and expected uncertainty level is proposed. Also, a novel 3-DoF robot arm using custom actuators with two discrete gear-ratios is presented. The advantages of gear-shifting dynamically are demonstrated through experiments and simulations. Results show that actively changing the gear-ratio using the proposed control algorithms can lead to an order-of-magnitude reduction of necessary actuator torque and power, and also increase robustness to disturbances.
△ Less
Submitted 23 May, 2024;
originally announced May 2024.
-
A Dual-Motor Actuator for Ceiling Robots with High Force and High Speed Capabilities
Authors:
Ian Lalonde,
Jeff Denis,
Mathieu Lamy,
Alexandre Girard
Abstract:
Patient transfer devices allow to move patients passively in hospitals and care centers. Instead of hoisting the patient, it would be beneficial in some cases to assist their movement, enabling them to move by themselves. However, patient assistance requires devices capable of precisely controlling output forces at significantly higher speeds than those used for patient transfers alone, and a sing…
▽ More
Patient transfer devices allow to move patients passively in hospitals and care centers. Instead of hoisting the patient, it would be beneficial in some cases to assist their movement, enabling them to move by themselves. However, patient assistance requires devices capable of precisely controlling output forces at significantly higher speeds than those used for patient transfers alone, and a single motor solution would be over-sized and show poor efficiency to do both functions. This paper presents a dual-motor actuator and control schemes adapted for a patient mobility equipment that can be used to transfer patients, assist patient in their movement, and help prevent falls. The prototype is shown to be able to lift patients weighing up to 318 kg, to assist a patient with a desired force of up to 100 kg with a precision of 7.8%. Also, a smart control scheme to manage falls is shown to be able to stop a patient who is falling by applying a desired deceleration.
△ Less
Submitted 8 May, 2024;
originally announced May 2024.
-
3D Growth and Remodeling Theory Supports the Hypothesis of Staphyloma Formation from Local Scleral Weakening under Normal Intraocular Pressure
Authors:
Fabian A. Braeu,
Stéphane Avril,
Michaël J. A. Girard
Abstract:
$\bf{Purpose}$: To assess whether Growth & Remodeling (G&R) theory could explain staphyloma formation from a local scleral weakening.
$\bf{Methods}…
▽ More
$\bf{Purpose}$: To assess whether Growth & Remodeling (G&R) theory could explain staphyloma formation from a local scleral weakening.
$\bf{Methods}$: A finite element model of a healthy eye was reconstructed, including the following connective tissues: the lamina cribrosa, the peripapillary sclera, and the peripheral sclera. The scleral shell was modelled as a constrained mixture, consisting of an isotropic ground matrix and two collagen fiber families (circumferential and meridional). The homogenized constrained mixture model was employed to simulate the adaptation of the sclera to alterations in its biomechanical environment over a duration of 13.7 years. G&R processes were triggered by reducing the shear stiffness of the ground matrix in the peripapillary sclera and lamina cribrosa by 85%. Three distinct G&R scenarios were investigated: (1) low mass turnover rate in combination with transmural volumetric growth; (2) high mass turnover rate in combination with transmural volumetric growth; and (3) high mass turnover rate in combination with mass density growth.
$\bf{Results}$: In scenario 1, we observed a significant outpouching of the posterior pole, closely resembling the shape of a Type-III staphyloma. Additionally, we found a notable change in scleral curvature and a thinning of the peripapillary sclera by 84%. In contrast, scenarios 2 and 3 exhibited less drastic deformations, with stable posterior staphylomas after approximately 7 years.
$\bf{Conclusions}$: Our framework suggests that local scleral weakening is sufficient to trigger staphyloma formation under normal intraocular pressure. With patient-specific scleral geometries (obtainable via wide-field optical coherence tomography), our framework could aid in identifying individuals at risk of developing posterior staphylomas.
△ Less
Submitted 4 April, 2024;
originally announced April 2024.
-
Autonomous Driving With Perception Uncertainties: Deep-Ensemble Based Adaptive Cruise Control
Authors:
Xiao Li,
H. Eric Tseng,
Anouck Girard,
Ilya Kolmanovsky
Abstract:
Autonomous driving depends on perception systems to understand the environment and to inform downstream decision-making. While advanced perception systems utilizing black-box Deep Neural Networks (DNNs) demonstrate human-like comprehension, their unpredictable behavior and lack of interpretability may hinder their deployment in safety critical scenarios. In this paper, we develop an Ensemble of DN…
▽ More
Autonomous driving depends on perception systems to understand the environment and to inform downstream decision-making. While advanced perception systems utilizing black-box Deep Neural Networks (DNNs) demonstrate human-like comprehension, their unpredictable behavior and lack of interpretability may hinder their deployment in safety critical scenarios. In this paper, we develop an Ensemble of DNN regressors (Deep Ensemble) that generates predictions with quantification of prediction uncertainties. In the scenario of Adaptive Cruise Control (ACC), we employ the Deep Ensemble to estimate distance headway to the lead vehicle from RGB images and enable the downstream controller to account for the estimation uncertainty. We develop an adaptive cruise controller that utilizes Stochastic Model Predictive Control (MPC) with chance constraints to provide a probabilistic safety guarantee. We evaluate our ACC algorithm using a high-fidelity traffic simulator and a real-world traffic dataset and demonstrate the ability of the proposed approach to effect speed tracking and car following while maintaining a safe distance headway. The out-of-distribution scenarios are also examined.
△ Less
Submitted 22 March, 2024;
originally announced March 2024.
-
Memoryless concretization relation
Authors:
Julien Calbert,
Sébastien Mattenet,
Antoine Girard,
Raphaël M. Jungers
Abstract:
We introduce the concept of memoryless concretization relation (MCR) to describe abstraction within the context of controller synthesis. This relation is a specific instance of alternating simulation relation (ASR), where it is possible to simplify the controller architecture. In the case of ASR, the concretized controller needs to simulate the concurrent evolution of two systems, the original and…
▽ More
We introduce the concept of memoryless concretization relation (MCR) to describe abstraction within the context of controller synthesis. This relation is a specific instance of alternating simulation relation (ASR), where it is possible to simplify the controller architecture. In the case of ASR, the concretized controller needs to simulate the concurrent evolution of two systems, the original and abstract systems, while for MCR, the designed controllers only need knowledge of the current concrete state. We demonstrate that the distinction between ASR and MCR becomes significant only when a non-deterministic quantizer is involved, such as in cases where the state space discretization consists of overlapping cells. We also show that any abstraction of a system that alternatingly simulates a system can be completed to satisfy MCR at the expense of increasing the non-determinism in the abstraction. We clarify the difference between the MCR and the feedback refinement relation (FRR), showing in particular that the former allows for non-constant controllers within cells. This provides greater flexibility in constructing a practical abstraction, for instance, by reducing non-determinism in the abstraction. Finally, we prove that this relation is not only sufficient, but also necessary, for ensuring the above properties.
△ Less
Submitted 14 March, 2024;
originally announced March 2024.
-
System-level Safety Guard: Safe Tracking Control through Uncertain Neural Network Dynamics Models
Authors:
Xiao Li,
Yutong Li,
Anouck Girard,
Ilya Kolmanovsky
Abstract:
The Neural Network (NN), as a black-box function approximator, has been considered in many control and robotics applications. However, difficulties in verifying the overall system safety in the presence of uncertainties hinder the deployment of NN modules in safety-critical systems. In this paper, we leverage the NNs as predictive models for trajectory tracking of unknown dynamical systems. We con…
▽ More
The Neural Network (NN), as a black-box function approximator, has been considered in many control and robotics applications. However, difficulties in verifying the overall system safety in the presence of uncertainties hinder the deployment of NN modules in safety-critical systems. In this paper, we leverage the NNs as predictive models for trajectory tracking of unknown dynamical systems. We consider controller design in the presence of both intrinsic uncertainty and uncertainties from other system modules. In this setting, we formulate the constrained trajectory tracking problem and show that it can be solved using Mixed-integer Linear Programming (MILP). The proposed MILP-based approach is empirically demonstrated in robot navigation and obstacle avoidance through simulations. The demonstration videos are available at https://xiaolisean.github.io/publication/2023-11-01-L4DC2024.
△ Less
Submitted 19 May, 2024; v1 submitted 11 December, 2023;
originally announced December 2023.
-
Decision-Making for Autonomous Vehicles with Interaction-Aware Behavioral Prediction and Social-Attention Neural Network
Authors:
Xiao Li,
Kaiwen Liu,
H. Eric Tseng,
Anouck Girard,
Ilya Kolmanovsky
Abstract:
Autonomous vehicles need to accomplish their tasks while interacting with human drivers in traffic. It is thus crucial to equip autonomous vehicles with artificial reasoning to better comprehend the intentions of the surrounding traffic, thereby facilitating the accomplishments of the tasks. In this work, we propose a behavioral model that encodes drivers' interacting intentions into latent social…
▽ More
Autonomous vehicles need to accomplish their tasks while interacting with human drivers in traffic. It is thus crucial to equip autonomous vehicles with artificial reasoning to better comprehend the intentions of the surrounding traffic, thereby facilitating the accomplishments of the tasks. In this work, we propose a behavioral model that encodes drivers' interacting intentions into latent social-psychological parameters. Leveraging a Bayesian filter, we develop a receding-horizon optimization-based controller for autonomous vehicle decision-making which accounts for the uncertainties in the interacting drivers' intentions. For online deployment, we design a neural network architecture based on the attention mechanism which imitates the behavioral model with online estimated parameter priors. We also propose a decision tree search algorithm to solve the decision-making problem online. The proposed behavioral model is then evaluated in terms of its capabilities for real-world trajectory prediction. We further conduct extensive evaluations of the proposed decision-making module, in forced highway merging scenarios, using both simulated environments and real-world traffic datasets. The results demonstrate that our algorithms can complete the forced merging tasks in various traffic conditions while ensuring driving safety.
△ Less
Submitted 31 October, 2023; v1 submitted 30 October, 2023;
originally announced October 2023.
-
Using Buckingham's $π$ Theorem for Multi-System Learning Transfer: a Case-study with 3 Vehicles Sharing a Database
Authors:
William Therrien,
Olivier Lecompte,
Alexandre Girard
Abstract:
Many advanced driver assistance schemes or autonomous vehicle controllers are based on a motion model of the vehicle behavior, i.e., a function predicting how the vehicle will react to a given control input. Data-driven models, based on experimental or simulated data, are very useful, especially for vehicles difficult to model analytically, for instance, ground vehicles for which the ground-tire i…
▽ More
Many advanced driver assistance schemes or autonomous vehicle controllers are based on a motion model of the vehicle behavior, i.e., a function predicting how the vehicle will react to a given control input. Data-driven models, based on experimental or simulated data, are very useful, especially for vehicles difficult to model analytically, for instance, ground vehicles for which the ground-tire interaction is hard to model from first principles. However, learning schemes are limited by the difficulty of collecting large amounts of experimental data or having to rely on high-fidelity simulations. This paper explores the potential of an approach that uses dimensionless numbers based on Buckingham's $π$ theorem to improve the efficiency of data for learning models, with the goal of facilitating knowledge sharing between similar systems. A case study using car-like vehicles compares traditional and dimensionless models on simulated and experimental data to validate the benefits of the new dimensionless learning approach. Prediction accuracy improvements with the dimensionless scheme when using a shared database, that is, predicting the motion of a vehicle based on data from various different vehicles was found to be 480\% more accurate for predicting a simple no-slip maneuver based on simulated data and 11\% more accurate to predict a highly dynamic braking maneuver based on experimental data. A modified physics-informed learning scheme with hand-crafted dimensionless features was also shown to increase the improvement to precision gains of 917\% and 28\% respectively. A comparative study also shows that using Buckingham's $π$ theorem is a much more effective preprocessing step for this task than principal component analysis (PCA) or simply normalizing the data.
△ Less
Submitted 3 July, 2024; v1 submitted 26 October, 2023;
originally announced October 2023.
-
Interaction-Aware Decision-Making for Autonomous Vehicles in Forced Merging Scenario Leveraging Social Psychology Factors
Authors:
Xiao Li,
Kaiwen Liu,
H. Eric Tseng,
Anouck Girard,
Ilya Kolmanovsky
Abstract:
Understanding the intention of vehicles in the surrounding traffic is crucial for an autonomous vehicle to successfully accomplish its driving tasks in complex traffic scenarios such as highway forced merging. In this paper, we consider a behavioral model that incorporates both social behaviors and personal objectives of the interacting drivers. Leveraging this model, we develop a receding-horizon…
▽ More
Understanding the intention of vehicles in the surrounding traffic is crucial for an autonomous vehicle to successfully accomplish its driving tasks in complex traffic scenarios such as highway forced merging. In this paper, we consider a behavioral model that incorporates both social behaviors and personal objectives of the interacting drivers. Leveraging this model, we develop a receding-horizon control-based decision-making strategy, that estimates online the other drivers' intentions using Bayesian filtering and incorporates predictions of nearby vehicles' behaviors under uncertain intentions. The effectiveness of the proposed decision-making strategy is demonstrated and evaluated based on simulation studies in comparison with a game theoretic controller and a real-world traffic dataset.
△ Less
Submitted 25 September, 2023;
originally announced September 2023.
-
Assessing Wind Impact on Semi-Autonomous Drone Landings for In-Contact Power Line Inspection
Authors:
Etienne Gendron,
Marc-Antoine Leclerc,
Samuel Hovington,
Etienne Perron,
David Rancourt,
Alexis Lussier-Desbiens,
Philippe Hamelin,
Alexandre Girard
Abstract:
In recent years, the use of inspection drones has become increasingly popular for high-voltage electric cable inspections due to their efficiency, cost-effectiveness, and ability to access hard-to-reach areas. However, safely landing drones on power lines, especially under windy conditions, remains a significant challenge. This study introduces a semi-autonomous control scheme for landing on an el…
▽ More
In recent years, the use of inspection drones has become increasingly popular for high-voltage electric cable inspections due to their efficiency, cost-effectiveness, and ability to access hard-to-reach areas. However, safely landing drones on power lines, especially under windy conditions, remains a significant challenge. This study introduces a semi-autonomous control scheme for landing on an electrical line with the NADILE drone (an experimental drone based on original LineDrone key features for inspection of power lines) and assesses the operating envelope under various wind conditions. A Monte Carlo method is employed to analyze the success probability of landing given initial drone states. The performance of the system is evaluated for two landing strategies, variously controllers parameters and four level of wind intensities. The results show that a two-stage landing strategies offers higher probabilities of landing success and give insight regarding the best controller parameters and the maximum wind level for which the system is robust. Lastly, an experimental demonstration of the system landing autonomously on a power line is presented.
△ Less
Submitted 11 September, 2023;
originally announced September 2023.
-
Dimensionless Policies based on the Buckingham $π$ Theorem: Is This a Good Way to Generalize Numerical Results?
Authors:
Alexandre Girard
Abstract:
The answer to the question posed in the title is yes if the context (the list of variables defining the motion control problem) is dimensionally similar. This article explores the use of the Buckingham $π$ theorem as a tool to encode the control policies of physical systems into a more generic form of knowledge that can be reused in various situations. This approach can be interpreted as enforcing…
▽ More
The answer to the question posed in the title is yes if the context (the list of variables defining the motion control problem) is dimensionally similar. This article explores the use of the Buckingham $π$ theorem as a tool to encode the control policies of physical systems into a more generic form of knowledge that can be reused in various situations. This approach can be interpreted as enforcing invariance to the scaling of the fundamental units in an algorithm learning a control policy. First, we show, by restating the solution to a motion control problem using dimensionless variables, that (1) the policy mapping involves a reduced number of parameters and (2) control policies generated numerically for a specific system can be transferred exactly to a subset of dimensionally similar systems by scaling the input and output variables appropriately. Those two generic theoretical results are then demonstrated, with numerically generated optimal controllers, for the classic motion control problem of swinging up a torque-limited inverted pendulum and positioning a vehicle in slippery conditions. We also discuss the concept of regime, a region in the space of context variables, that can help to relax the similarity condition. Furthermore, we discuss how applying dimensional scaling of the input and output of a context-specific black-box policy is equivalent to substituting new system parameters in an analytical equation under some conditions, using a linear quadratic regulator (LQR) and a computed torque controller as examples. It remains to be seen how practical this approach can be to generalize policies for more complex high-dimensional problems, but the early results show that it is a promising transfer learning tool for numerical approaches like dynamic programming and reinforcement learning.
△ Less
Submitted 28 February, 2024; v1 submitted 28 July, 2023;
originally announced July 2023.
-
A Bayesian Framework for Causal Analysis of Recurrent Events in Presence of Immortal Risk
Authors:
Arman Oganisian,
Anthony Girard,
Jon A. Steingrimsson,
Patience Moyo
Abstract:
Observational studies of recurrent event rates are common in biomedical statistics. Broadly, the goal is to estimate differences in event rates under two treatments within a defined target population over a specified followup window. Estimation with observational claims data is challenging because while membership in the target population is defined in terms of eligibility criteria, treatment is r…
▽ More
Observational studies of recurrent event rates are common in biomedical statistics. Broadly, the goal is to estimate differences in event rates under two treatments within a defined target population over a specified followup window. Estimation with observational claims data is challenging because while membership in the target population is defined in terms of eligibility criteria, treatment is rarely assigned exactly at the time of eligibility. Ad-hoc solutions to this timing misalignment, such as assigning treatment at eligibility based on subsequent assignment, incorrectly attribute prior event rates to treatment - resulting in immortal risk bias. Even if eligibility and treatment are aligned, a terminal event process (e.g. death) often stops the recurrent event process of interest. Both processes are also censored so that events are not observed over the entire followup window. Our approach addresses misalignment by casting it as a treatment switching problem: some patients are on treatment at eligibility while others are off treatment but may switch to treatment at a specified time - if they survive long enough. We define and identify an average causal effect of switching under specified causal assumptions. Estimation is done using a g-computation framework with a joint semiparametric Bayesian model for the death and recurrent event processes. Computing the estimand for various switching times allows us to assess the impact of treatment timing. We apply the method to contrast hospitalization rates under different opioid treatment strategies among patients with chronic back pain using Medicare claims data.
△ Less
Submitted 6 April, 2023;
originally announced April 2023.
-
The 3D Structural Phenotype of the Glaucomatous Optic Nerve Head and its Relationship with The Severity of Visual Field Damage
Authors:
Fabian A. Braeu,
Thanadet Chuangsuwanich,
Tin A. Tun,
Shamira A. Perera,
Rahat Husain,
Aiste Kadziauskiene,
Leopold Schmetterer,
Alexandre H. Thiéry,
George Barbastathis,
Tin Aung,
Michaël J. A. Girard
Abstract:
$\bf{Purpose}$: To describe the 3D structural changes in both connective and neural tissues of the optic nerve head (ONH) that occur concurrently at different stages of glaucoma using traditional and AI-driven approaches.
$\bf{Methods}$: We included 213 normal, 204 mild glaucoma (mean deviation [MD] $\ge…
▽ More
$\bf{Purpose}$: To describe the 3D structural changes in both connective and neural tissues of the optic nerve head (ONH) that occur concurrently at different stages of glaucoma using traditional and AI-driven approaches.
$\bf{Methods}$: We included 213 normal, 204 mild glaucoma (mean deviation [MD] $\ge$ -6.00 dB), 118 moderate glaucoma (MD of -6.01 to -12.00 dB), and 118 advanced glaucoma patients (MD < -12.00 dB). All subjects had their ONHs imaged in 3D with Spectralis optical coherence tomography. To describe the 3D structural phenotype of glaucoma as a function of severity, we used two different approaches: (1) We extracted human-defined 3D structural parameters of the ONH including retinal nerve fiber layer (RNFL) thickness, lamina cribrosa (LC) shape and depth at different stages of glaucoma; (2) we also employed a geometric deep learning method (i.e. PointNet) to identify the most important 3D structural features that differentiate ONHs from different glaucoma severity groups without any human input.
$\bf{Results}$: We observed that the majority of ONH structural changes occurred in the early glaucoma stage, followed by a plateau effect in the later stages. Using PointNet, we also found that 3D ONH structural changes were present in both neural and connective tissues. In both approaches, we observed that structural changes were more prominent in the superior and inferior quadrant of the ONH, particularly in the RNFL, the prelamina, and the LC. As the severity of glaucoma increased, these changes became more diffuse (i.e. widespread), particularly in the LC.
$\bf{Conclusions}$: In this study, we were able to uncover complex 3D structural changes of the ONH in both neural and connective tissues as a function of glaucoma severity. We hope to provide new insights into the complex pathophysiology of glaucoma that might help clinicians in their daily clinical care.
△ Less
Submitted 7 January, 2023;
originally announced January 2023.
-
Safe Control and Learning Using Generalized Action Governor
Authors:
Nan Li,
Yutong Li,
Ilya Kolmanovsky,
Anouck Girard,
H. Eric Tseng,
Dimitar Filev
Abstract:
This paper introduces the Generalized Action Governor, which is a supervisory scheme for augmenting a nominal closed-loop system with the capability of strictly handling constraints. After presenting its theory for general systems and introducing tailored design approaches for linear and discrete systems, we discuss its application to safe online learning, which aims to safely evolve control param…
▽ More
This paper introduces the Generalized Action Governor, which is a supervisory scheme for augmenting a nominal closed-loop system with the capability of strictly handling constraints. After presenting its theory for general systems and introducing tailored design approaches for linear and discrete systems, we discuss its application to safe online learning, which aims to safely evolve control parameters using real-time data to improve performance for uncertain systems. In particular, we propose two safe learning algorithms based on integration of reinforcement learning/data-driven Koopman operator-based control with the generalized action governor. The developments are illustrated with a numerical example.
△ Less
Submitted 22 November, 2022;
originally announced November 2022.
-
On the economic viability of solar energy when upgrading cellular networks
Authors:
Zineb Garroussi,
Abdoul Wassi Badirou,
Mathieu D'amours,
André Girard,
Brunilde Sansò
Abstract:
The massive increase of data traffic, the widespread proliferation of wireless applications and the full-scale deployment of 5G and the IoT, imply a steep increase in cellular networks energy use, resulting in a significant carbon footprint. This paper presents a comprehensive model to show the interaction between the networking and energy features of the problem and study the economical and techn…
▽ More
The massive increase of data traffic, the widespread proliferation of wireless applications and the full-scale deployment of 5G and the IoT, imply a steep increase in cellular networks energy use, resulting in a significant carbon footprint. This paper presents a comprehensive model to show the interaction between the networking and energy features of the problem and study the economical and technical viability of green networking. Solar equipment, cell zooming, energy management and dynamic user allocation are considered in the upgrading network planning process. We propose a mixed-integer optimization model to minimize long-term capital costs and operational energy expenditures in a heterogeneous on-grid cellular network with different types of base station, including solar. Based on eight scenarios where realistic costs of solar panels, batteries, and inverters were considered, we first found that solar base stations are currently not economically interesting for cellular operators. We next studied the impact of a significant and progressive carbon tax on reducing greenhouse gas emissions (GHG). We found that, at current energy and equipment prices, a carbon tax ten-fold the current value is the only element that could make green base stations economically viable.
△ Less
Submitted 17 October, 2022;
originally announced October 2022.
-
Are Macula or Optic Nerve Head Structures better at Diagnosing Glaucoma? An Answer using AI and Wide-Field Optical Coherence Tomography
Authors:
Charis Y. N. Chiang,
Fabian Braeu,
Thanadet Chuangsuwanich,
Royston K. Y. Tan,
Jacqueline Chua,
Leopold Schmetterer,
Alexandre Thiery,
Martin Buist,
Michaël J. A. Girard
Abstract:
Purpose: (1) To develop a deep learning algorithm to automatically segment structures of the optic nerve head (ONH) and macula in 3D wide-field optical coherence tomography (OCT) scans; (2) To assess whether 3D macula or ONH structures (or the combination of both) provide the best diagnostic power for glaucoma. Methods: A cross-sectional comparative study was performed which included wide-field sw…
▽ More
Purpose: (1) To develop a deep learning algorithm to automatically segment structures of the optic nerve head (ONH) and macula in 3D wide-field optical coherence tomography (OCT) scans; (2) To assess whether 3D macula or ONH structures (or the combination of both) provide the best diagnostic power for glaucoma. Methods: A cross-sectional comparative study was performed which included wide-field swept-source OCT scans from 319 glaucoma subjects and 298 non-glaucoma subjects. All scans were compensated to improve deep-tissue visibility. We developed a deep learning algorithm to automatically label all major ONH tissue structures by using 270 manually annotated B-scans for training. The performance of our algorithm was assessed using the Dice coefficient (DC). A glaucoma classification algorithm (3D CNN) was then designed using a combination of 500 OCT volumes and their corresponding automatically segmented masks. This algorithm was trained and tested on 3 datasets: OCT scans cropped to contain the macular tissues only, those to contain the ONH tissues only, and the full wide-field OCT scans. The classification performance for each dataset was reported using the AUC. Results: Our segmentation algorithm was able to segment ONH and macular tissues with a DC of 0.94 $\pm$ 0.003. The classification algorithm was best able to diagnose glaucoma using wide-field 3D-OCT volumes with an AUC of 0.99 $\pm$ 0.01, followed by ONH volumes with an AUC of 0.93 $\pm$ 0.06, and finally macular volumes with an AUC of 0.91 $\pm$ 0.11. Conclusions: this study showed that using wide-field OCT as compared to the typical OCT images containing just the ONH or macular may allow for a significantly improved glaucoma diagnosis. This may encourage the mainstream adoption of 3D wide-field OCT scans. For clinical AI studies that use traditional machines, we would recommend the use of ONH scans as opposed to macula scans.
△ Less
Submitted 12 October, 2022;
originally announced October 2022.
-
A Bimodal Hydrostatic Actuator for Robotic Legs with Compliant Fast Motion and High Lifting Force
Authors:
Alex Lecavalier,
Jeff Denis,
Jean-Sébastien Plante,
Alexandre Girard
Abstract:
Robotic legs have bimodal operations: swing phases when the leg needs to move quickly in the air (high-speed, low-force) and stance phases when the leg bears the weight of the system (low-speed, high-force). Sizing a traditional single-ratio actuation system for such extremum operations leads to oversized heavy electric motor and poor energy efficiency, which hinder the capability of legged system…
▽ More
Robotic legs have bimodal operations: swing phases when the leg needs to move quickly in the air (high-speed, low-force) and stance phases when the leg bears the weight of the system (low-speed, high-force). Sizing a traditional single-ratio actuation system for such extremum operations leads to oversized heavy electric motor and poor energy efficiency, which hinder the capability of legged systems that bear the mass of their actuators and energy source. This paper explores an actuation concept where a hydrostatic transmission is dynamically reconfigured using valves to suit the requirements of each phase of a robotic leg. An analysis of the mass-delay-flow trade-off for the switching valve is presented. Then, a custom actuation system is built and integrated on a robotic leg test bench to evaluate the concept. Experimental results show that 1) small motorized ball valves can make fast transitions between operating modes when designed for this task, 2) the proposed operating principle and control schemes allow for seamless transitions, even during an impact with the ground and 3) the actuator characteristics address the needs of a leg bimodal operation in terms of force, speed and compliance.
△ Less
Submitted 11 October, 2022;
originally announced October 2022.
-
Robust Action Governor for Uncertain Piecewise Affine Systems with Non-convex Constraints and Safe Reinforcement Learning
Authors:
Yutong Li,
Nan Li,
H. Eric Tseng,
Anouck Girard,
Dimitar Filev,
Ilya Kolmanovsky
Abstract:
The action governor is an add-on scheme to a nominal control loop that monitors and adjusts the control actions to enforce safety specifications expressed as pointwise-in-time state and control constraints. In this paper, we introduce the Robust Action Governor (RAG) for systems the dynamics of which can be represented using discrete-time Piecewise Affine (PWA) models with both parametric and addi…
▽ More
The action governor is an add-on scheme to a nominal control loop that monitors and adjusts the control actions to enforce safety specifications expressed as pointwise-in-time state and control constraints. In this paper, we introduce the Robust Action Governor (RAG) for systems the dynamics of which can be represented using discrete-time Piecewise Affine (PWA) models with both parametric and additive uncertainties and subject to non-convex constraints. We develop the theoretical properties and computational approaches for the RAG. After that, we introduce the use of the RAG for realizing safe Reinforcement Learning (RL), i.e., ensuring all-time constraint satisfaction during online RL exploration-and-exploitation process. This development enables safe real-time evolution of the control policy and adaptation to changes in the operating environment and system parameters (due to aging, damage, etc.). We illustrate the effectiveness of the RAG in constraint enforcement and safe RL using the RAG by considering their applications to a soft-landing problem of a mass-spring-damper system.
△ Less
Submitted 17 July, 2022;
originally announced July 2022.
-
Low-Level Force-Control of MR-Hydrostatic Actuators
Authors:
Jeff Denis,
Jean-Sebastien Plante,
Alexandre Girard
Abstract:
Precise and high-fidelity force control is critical for new generations of robots that interact with humans and unknown environments. Mobile robots, such as wearable devices and legged robots, must also be lightweight to accomplish their function. Hydrostatic transmissions have been proposed as a promising strategy for meeting these two challenging requirements. In previous publications, it was sh…
▽ More
Precise and high-fidelity force control is critical for new generations of robots that interact with humans and unknown environments. Mobile robots, such as wearable devices and legged robots, must also be lightweight to accomplish their function. Hydrostatic transmissions have been proposed as a promising strategy for meeting these two challenging requirements. In previous publications, it was shown that using magnetorheological (MR) actuators coupled with hydrostatic transmissions provides high power density and great open-loop human-robot interactions. Still, the open-loop force fidelity at low and high frequencies are decreased by the transmission's dynamics and by nonlinear friction. This letter compares control strategies for MR-hydrostatic actuator systems to increase its torque fidelity, defined as the bandwidth (measured vs desired torque reference) and transparency (minimizing the undesired forces reflected to the end effector when backdriving the robot). Four control approaches are developed and compared experimentally: (1) Open-loop control with friction compensation; (2) non-collocated pressure feedback; (3) collocated pressure feedback; (4) LQGI state feedback. A dither strategy is also implemented to smoothen ball screw friction. Results show that approaches (1), (2) and (3) can increase the performances but are facing compromises, while approach (4) can simultaneously improve all metrics. These results show the potential of using control schemes for improving the force control performance of robots using tethered architectures, addressing issues such as transmission dynamics and friction.
△ Less
Submitted 6 July, 2022;
originally announced July 2022.
-
Multimodal Hydrostatic Actuators for Wearable Robots: A Preliminary Assessment of Mass-Saving and Energy-Efficiency Opportunities
Authors:
Jeff Denis,
Alex Lecavalier,
Jean-Sebastien Plante,
Alexandre Girard
Abstract:
Wearable robots are limited by their actuators performances because they must bear the weight of their own power system and energy source. This paper explores the idea of leveraging hybrid modes to meet multiple operating points with a lightweight and efficient system by using hydraulic valves to dynamically reconfigure the connections of a hydrostatic actuator. The analyzed opportunities consist…
▽ More
Wearable robots are limited by their actuators performances because they must bear the weight of their own power system and energy source. This paper explores the idea of leveraging hybrid modes to meet multiple operating points with a lightweight and efficient system by using hydraulic valves to dynamically reconfigure the connections of a hydrostatic actuator. The analyzed opportunities consist in 1) switching between a highly geared power source or a fast power source, 2) dynamically connecting an energy accumulator and 3) using a locking mechanism for holding. Based on a knee exoskeleton case study analysis, results show that switching between gearing ratio can lead to a lighter and more efficient actuator. Also, results show that using an accumulator to provide a preload continuous force has great mass-saving potential, but does not reduce mass significantly if used as a power booster for short transients. Finally, using a locking valve can slightly reduce battery mass if the work cycle includes frequent stops. The operating principles of the proposed multimodal schemes are demonstrated with a one-DOF prototype.
△ Less
Submitted 6 July, 2022;
originally announced July 2022.
-
A Lightweight Force-Controllable Wearable Arm Based on Magnetorheological-Hydrostatic Actuators
Authors:
Catherine Véronneau,
Jeff Denis,
Louis-Philippe Lebel,
Marc Denninger,
Jean-Sébastien Plante,
Alexandre Girard
Abstract:
Supernumerary Robotic Limbs (SRLs) are wearable robots augmenting human capabilities by acting as a co-worker, reaching objects, support human arms, etc. However, existing SRLs lack the mechanical backdrivability and bandwidth required for tasks where the interaction forces must be controllable such as painting, manipulating fragile objects, etc. Being highly backdrivable with a high bandwidth whi…
▽ More
Supernumerary Robotic Limbs (SRLs) are wearable robots augmenting human capabilities by acting as a co-worker, reaching objects, support human arms, etc. However, existing SRLs lack the mechanical backdrivability and bandwidth required for tasks where the interaction forces must be controllable such as painting, manipulating fragile objects, etc. Being highly backdrivable with a high bandwidth while minimizing weight presents a major technological challenge imposed by the limited performances of conventional electromagnetic actuators. This paper studies the feasibility of using magnetorheological (MR) clutches coupled to a low-friction hydrostatic transmission to provide a highly capable, but yet lightweight, force-controllable SRL. A 2.7 kg 2-DOFs wearable robotic arm is designed and built. Shoulder and elbow joints are designed to deliver 39 and 25 Nm, with 115 and 180° of range of motion. Experimental studies conducted on a one-DOF test bench and validated analytically demonstrate a high force bandwidth (>25 Hz) and a good ability to control interaction forces even when interacting with an external impedance. Furthermore, three force-control approaches are studied and demonstrated experimentally: open-loop, closed-loop on force, and closed-loop on pressure. All three methods are shown to be effective. Overall, the proposed MR-Hydrostatic actuation system is well-suited for a lightweight SRL interacting with both human and environment that add unpredictable disturbances.
△ Less
Submitted 27 June, 2022;
originally announced June 2022.
-
AI-based Clinical Assessment of Optic Nerve Head Robustness Superseding Biomechanical Testing
Authors:
Fabian A. Braeu,
Thanadet Chuangsuwanich,
Tin A. Tun,
Alexandre H. Thiery,
Tin Aung,
George Barbastathis,
Michaël J. A. Girard
Abstract:
$\mathbf{Purpose}$: To use artificial intelligence (AI) to: (1) exploit biomechanical knowledge of the optic nerve head (ONH) from a relatively large population; (2) assess ONH robustness from a single optical coherence tomography (OCT) scan of the ONH; (3) identify what critical three-dimensional (3D) structural features make a given ONH robust.
$\mathbf{Design}…
▽ More
$\mathbf{Purpose}$: To use artificial intelligence (AI) to: (1) exploit biomechanical knowledge of the optic nerve head (ONH) from a relatively large population; (2) assess ONH robustness from a single optical coherence tomography (OCT) scan of the ONH; (3) identify what critical three-dimensional (3D) structural features make a given ONH robust.
$\mathbf{Design}$: Retrospective cross-sectional study.
$\mathbf{Methods}$: 316 subjects had their ONHs imaged with OCT before and after acute intraocular pressure (IOP) elevation through ophthalmo-dynamometry. IOP-induced lamina-cribrosa deformations were then mapped in 3D and used to classify ONHs. Those with LC deformations superior to 4% were considered fragile, while those with deformations inferior to 4% robust. Learning from these data, we compared three AI algorithms to predict ONH robustness strictly from a baseline (undeformed) OCT volume: (1) a random forest classifier; (2) an autoencoder; and (3) a dynamic graph CNN (DGCNN). The latter algorithm also allowed us to identify what critical 3D structural features make a given ONH robust.
$\mathbf{Results}$: All 3 methods were able to predict ONH robustness from 3D structural information alone and without the need to perform biomechanical testing. The DGCNN (area under the receiver operating curve [AUC]: 0.76 $\pm$ 0.08) outperformed the autoencoder (AUC: 0.70 $\pm$ 0.07) and the random forest classifier (AUC: 0.69 $\pm$ 0.05). Interestingly, to assess ONH robustness, the DGCNN mainly used information from the scleral canal and the LC insertion sites.
$\mathbf{Conclusions}$: We propose an AI-driven approach that can assess the robustness of a given ONH solely from a single OCT scan of the ONH, and without the need to perform biomechanical testing. Longitudinal studies should establish whether ONH robustness could help us identify fast visual field loss progressors.
△ Less
Submitted 9 June, 2022;
originally announced June 2022.
-
Performance Study of Low Inertia Magnetorheological Actuators for Kinesthetic Haptic Devices
Authors:
Louis-Philippe Lebel,
Jean-Alexis Verreault,
Jean-Philippe Lucking Bigué,
Jean-Sébastien Plante,
Alexandre Girard
Abstract:
A challenge to high quality virtual reality (VR) simulations is the development of high-fidelity haptic devices that can render a wide range of impedances at both low and high frequencies. To this end, a thorough analytical and experimental assessment of the performance of magnetorheological (MR) actuators is performed and compared to electric motor (EM) actuation. A 2 degrees-of-freedom dynamic m…
▽ More
A challenge to high quality virtual reality (VR) simulations is the development of high-fidelity haptic devices that can render a wide range of impedances at both low and high frequencies. To this end, a thorough analytical and experimental assessment of the performance of magnetorheological (MR) actuators is performed and compared to electric motor (EM) actuation. A 2 degrees-of-freedom dynamic model of a kinesthetic haptic device is used to conduct the analytical study comparing the rendering area, rendering bandwidth, gearing and scaling of both technologies. Simulation predictions are corroborated by experimental validation over a wide range of operating conditions. Results show that, for a same output force, MR actuators can render a bandwidth over 52.9% higher than electric motors due to their low inertia. Unlike electric motors, the performance of MR actuators for use in haptic devices are not limited by their output inertia but by their viscous damping, which must be carefully addressed at the design stage.
△ Less
Submitted 1 June, 2022;
originally announced June 2022.
-
Controller design and experimental evaluation of a motorised assistance for a patient transfer floor lift
Authors:
Donatien Callon,
Ian Lalonde,
Mathieu Nadeau,
Alexandre Girard
Abstract:
Patient transfer is a challenging, critical task because it exposes caregivers to injury risks. Available transfer devices, like floor lifts, lead to improvements but are far from perfect. They do not eliminate the caregivers risk of musculoskeletal disorders, and they can be burdensome to use due to their poor maneuverability. This paper presents a new motorized floor lift with a single central m…
▽ More
Patient transfer is a challenging, critical task because it exposes caregivers to injury risks. Available transfer devices, like floor lifts, lead to improvements but are far from perfect. They do not eliminate the caregivers risk of musculoskeletal disorders, and they can be burdensome to use due to their poor maneuverability. This paper presents a new motorized floor lift with a single central motorized wheel connected to an instrumented handle. Admittance controllers are designed to 1) improve the device maneuverability, 2) reduce the required caregiver effort, and 3) ensure the security and comfort of patients. Two controller designs, one with a linear admittance law and a non-linear admittance law with variable damping, were developed and implemented on a prototype. Tests were performed on seven participants to evaluate the performance of the assistance system and the controllers. The experimental results show that 1) the motorized assistance with the variable damping controller improves maneuverability by 28%, 2) reduces the amount of effort required to push the lift by 66% and 3) provides the same level of patient comfort compared to a standard unassisted floor lift.
△ Less
Submitted 23 May, 2024; v1 submitted 30 May, 2022;
originally announced May 2022.
-
Experimental investigation of a maneuver selection algorithm for vehicles in low adhesion conditions
Authors:
Olivier Lecompte,
William Therrien,
Alexandre Girard
Abstract:
Winter conditions, characterized by the presence of ice and snow on the ground, are more likely to lead to road accidents. This paper presents an experimental proof of concept, with a 1/5th scale car platform, of a maneuver selection scheme for low adhesion conditions. In the proposed approach, a model-based estimator first processes the high-dimensional sensors data of the IMU, LIDAR and encoders…
▽ More
Winter conditions, characterized by the presence of ice and snow on the ground, are more likely to lead to road accidents. This paper presents an experimental proof of concept, with a 1/5th scale car platform, of a maneuver selection scheme for low adhesion conditions. In the proposed approach, a model-based estimator first processes the high-dimensional sensors data of the IMU, LIDAR and encoders to estimate physically relevant vehicle and ground conditions parameters such as the inertial velocity of the vehicle $v$, the friction coefficient $μ$, the cohesion $c$ and the internal shear angle $φ$. Then, a data-driven predictor is trained to predict the optimal maneuver to perform in the situation characterized by the estimated parameters. Experimental results show that it is possible to 1) produce a real-time estimate of the relevant ground parameters, and 2) determine an optimal maneuver based on the estimated parameters between a limited set of maneuvers.
△ Less
Submitted 23 May, 2024; v1 submitted 30 May, 2022;
originally announced May 2022.
-
A practical optimal control approach for two-speed actuators
Authors:
Alexandre Girard,
H. Harry Asada
Abstract:
This paper addresses the closed-loop control of an actuator with both a continuous input variable (motor torque) and a discrete input variable (mode selection). In many applications, robots have to bear large loads while moving slowly and also have to move quickly through the air with almost no load, leading to conflicting requirements for their actuators. An actuator with multiple gear ratios, li…
▽ More
This paper addresses the closed-loop control of an actuator with both a continuous input variable (motor torque) and a discrete input variable (mode selection). In many applications, robots have to bear large loads while moving slowly and also have to move quickly through the air with almost no load, leading to conflicting requirements for their actuators. An actuator with multiple gear ratios, like in a powertrain, can address this issue by allowing an effective use of power over a wide range of output speed. However, having discrete modes of operation adds complexity to the high-level control and planning. Here a controller for two-speed actuators that automatically select both the best gear ratio and the motor torque is developed. The approach is to: first derive a low-dimensional model, then use dynamic programming to find the best actions for all possible situations, and last use regression analysis to extract simplified global feedback laws. This approach produces simple practical nearly-optimal feedback laws. A controller that globally minimizes a quadratic cost function is derived for a two-speed actuator prototype, global stability is proven and performance is demonstrated experimentally.
△ Less
Submitted 30 May, 2022;
originally announced May 2022.
-
A Fast Gear-Shifting Actuator for Robotic Tasks with Contacts
Authors:
Alexandre Girard,
H. Harry Asada
Abstract:
Vehicle power-trains use a variable transmission (multiple gear-ratios) to minimize motor size and maximize efficiency while meeting a wide-range of operating points. Robots could similarly benefit from variable transmission to save weight and improve energy efficiency; leading to potentially groundbreaking improvements for mobile and wearable robotic systems. However, variable transmissions in a…
▽ More
Vehicle power-trains use a variable transmission (multiple gear-ratios) to minimize motor size and maximize efficiency while meeting a wide-range of operating points. Robots could similarly benefit from variable transmission to save weight and improve energy efficiency; leading to potentially groundbreaking improvements for mobile and wearable robotic systems. However, variable transmissions in a robotic context leads to new challenges regarding the gear-shifting methodology: 1) order-of-magnitude variations of reduction ratios are desired, and 2) contact situations during manipulation/locomotion tasks lead to impulsive behavior at the moment when gear-shifting is required. This paper present an actuator with a gear-shifting methodology that can seamlessly change between two very different reduction ratios during dynamic contact situations. Experimental results demonstrate the ability to execute a gear-shift from a 1:23 reduction to a 1:474 reduction in less than 30ms during contact with a rigid object.
△ Less
Submitted 30 May, 2022;
originally announced May 2022.
-
Medical Application of Geometric Deep Learning for the Diagnosis of Glaucoma
Authors:
Alexandre H. Thiery,
Fabian Braeu,
Tin A. Tun,
Tin Aung,
Michael J. A. Girard
Abstract:
Purpose: (1) To assess the performance of geometric deep learning (PointNet) in diagnosing glaucoma from a single optical coherence tomography (OCT) 3D scan of the optic nerve head (ONH); (2) To compare its performance to that obtained with a standard 3D convolutional neural network (CNN), and with a gold-standard glaucoma parameter, i.e. retinal nerve fiber layer (RNFL) thickness.
Methods: 3D r…
▽ More
Purpose: (1) To assess the performance of geometric deep learning (PointNet) in diagnosing glaucoma from a single optical coherence tomography (OCT) 3D scan of the optic nerve head (ONH); (2) To compare its performance to that obtained with a standard 3D convolutional neural network (CNN), and with a gold-standard glaucoma parameter, i.e. retinal nerve fiber layer (RNFL) thickness.
Methods: 3D raster scans of the ONH were acquired with Spectralis OCT for 477 glaucoma and 2,296 non-glaucoma subjects at the Singapore National Eye Centre. All volumes were automatically segmented using deep learning to identify 7 major neural and connective tissues including the RNFL, the prelamina, and the lamina cribrosa (LC). Each ONH was then represented as a 3D point cloud with 1,000 points chosen randomly from all tissue boundaries. To simplify the problem, all ONH point clouds were aligned with respect to the plane and center of Bruch's membrane opening. Geometric deep learning (PointNet) was then used to provide a glaucoma diagnosis from a single OCT point cloud. The performance of our approach was compared to that obtained with a 3D CNN, and with RNFL thickness.
Results: PointNet was able to provide a robust glaucoma diagnosis solely from the ONH represented as a 3D point cloud (AUC=95%). The performance of PointNet was superior to that obtained with a standard 3D CNN (AUC=87%) and with that obtained from RNFL thickness alone (AUC=80%).
Discussion: We provide a proof-of-principle for the application of geometric deep learning in the field of glaucoma. Our technique requires significantly less information as input to perform better than a 3D CNN, and with an AUC superior to that obtained from RNFL thickness alone. Geometric deep learning may have wide applicability in the field of Ophthalmology.
△ Less
Submitted 14 April, 2022;
originally announced April 2022.
-
Geometric Deep Learning to Identify the Critical 3D Structural Features of the Optic Nerve Head for Glaucoma Diagnosis
Authors:
Fabian A. Braeu,
Alexandre H. Thiéry,
Tin A. Tun,
Aiste Kadziauskiene,
George Barbastathis,
Tin Aung,
Michaël J. A. Girard
Abstract:
Purpose: The optic nerve head (ONH) undergoes complex and deep 3D morphological changes during the development and progression of glaucoma. Optical coherence tomography (OCT) is the current gold standard to visualize and quantify these changes, however the resulting 3D deep-tissue information has not yet been fully exploited for the diagnosis and prognosis of glaucoma. To this end, we aimed: (1) T…
▽ More
Purpose: The optic nerve head (ONH) undergoes complex and deep 3D morphological changes during the development and progression of glaucoma. Optical coherence tomography (OCT) is the current gold standard to visualize and quantify these changes, however the resulting 3D deep-tissue information has not yet been fully exploited for the diagnosis and prognosis of glaucoma. To this end, we aimed: (1) To compare the performance of two relatively recent geometric deep learning techniques in diagnosing glaucoma from a single OCT scan of the ONH; and (2) To identify the 3D structural features of the ONH that are critical for the diagnosis of glaucoma.
Methods: In this study, we included a total of 2,247 non-glaucoma and 2,259 glaucoma scans from 1,725 subjects. All subjects had their ONHs imaged in 3D with Spectralis OCT. All OCT scans were automatically segmented using deep learning to identify major neural and connective tissues. Each ONH was then represented as a 3D point cloud. We used PointNet and dynamic graph convolutional neural network (DGCNN) to diagnose glaucoma from such 3D ONH point clouds and to identify the critical 3D structural features of the ONH for glaucoma diagnosis.
Results: Both the DGCNN (AUC: 0.97$\pm$0.01) and PointNet (AUC: 0.95$\pm$0.02) were able to accurately detect glaucoma from 3D ONH point clouds. The critical points formed an hourglass pattern with most of them located in the inferior and superior quadrant of the ONH.
Discussion: The diagnostic accuracy of both geometric deep learning approaches was excellent. Moreover, we were able to identify the critical 3D structural features of the ONH for glaucoma diagnosis that tremendously improved the transparency and interpretability of our method. Consequently, our approach may have strong potential to be used in clinical applications for the diagnosis and prognosis of a wide range of ophthalmic disorders.
△ Less
Submitted 20 April, 2022; v1 submitted 14 April, 2022;
originally announced April 2022.
-
Explainable and Interpretable Diabetic Retinopathy Classification Based on Neural-Symbolic Learning
Authors:
Se-In Jang,
Michael J. A. Girard,
Alexandre H. Thiery
Abstract:
In this paper, we propose an explainable and interpretable diabetic retinopathy (ExplainDR) classification model based on neural-symbolic learning. To gain explainability, a highlevel symbolic representation should be considered in decision making. Specifically, we introduce a human-readable symbolic representation, which follows a taxonomy style of diabetic retinopathy characteristics related to…
▽ More
In this paper, we propose an explainable and interpretable diabetic retinopathy (ExplainDR) classification model based on neural-symbolic learning. To gain explainability, a highlevel symbolic representation should be considered in decision making. Specifically, we introduce a human-readable symbolic representation, which follows a taxonomy style of diabetic retinopathy characteristics related to eye health conditions to achieve explainability. We then include humanreadable features obtained from the symbolic representation in the disease prediction. Experimental results on a diabetic retinopathy classification dataset show that our proposed ExplainDR method exhibits promising performance when compared to that from state-of-the-art methods applied to the IDRiD dataset, while also providing interpretability and explainability.
△ Less
Submitted 31 March, 2022;
originally announced April 2022.
-
3D Structural Analysis of the Optic Nerve Head to Robustly Discriminate Between Papilledema and Optic Disc Drusen
Authors:
Michaël J. A. Girard,
Satish K. Panda,
Tin Aung Tun,
Elisabeth A. Wibroe,
Raymond P. Najjar,
Aung Tin,
Alexandre H. Thiéry,
Steffen Hamann,
Clare Fraser,
Dan Milea
Abstract:
Purpose: (1) To develop a deep learning algorithm to identify major tissue structures of the optic nerve head (ONH) in 3D optical coherence tomography (OCT) scans; (2) to exploit such information to robustly differentiate among healthy, optic disc drusen (ODD), and papilledema ONHs.
It was a cross-sectional comparative study with confirmed ODD (105 eyes), papilledema due to high intracranial pre…
▽ More
Purpose: (1) To develop a deep learning algorithm to identify major tissue structures of the optic nerve head (ONH) in 3D optical coherence tomography (OCT) scans; (2) to exploit such information to robustly differentiate among healthy, optic disc drusen (ODD), and papilledema ONHs.
It was a cross-sectional comparative study with confirmed ODD (105 eyes), papilledema due to high intracranial pressure (51 eyes), and healthy controls (100 eyes). 3D scans of the ONHs were acquired using OCT, then processed to improve deep-tissue visibility. At first, a deep learning algorithm was developed using 984 B-scans (from 130 eyes) in order to identify: major neural/connective tissues, and ODD regions. The performance of our algorithm was assessed using the Dice coefficient (DC). In a 2nd step, a classification algorithm (random forest) was designed using 150 OCT volumes to perform 3-class classifications (1: ODD, 2: papilledema, 3: healthy) strictly from their drusen and prelamina swelling scores (derived from the segmentations). To assess performance, we reported the area under the receiver operating characteristic curves (AUCs) for each class.
Our segmentation algorithm was able to isolate neural and connective tissues, and ODD regions whenever present. This was confirmed by an average DC of 0.93$\pm$0.03 on the test set, corresponding to good performance. Classification was achieved with high AUCs, i.e. 0.99$\pm$0.01 for the detection of ODD, 0.99 $\pm$ 0.01 for the detection of papilledema, and 0.98$\pm$0.02 for the detection of healthy ONHs.
Our AI approach accurately discriminated ODD from papilledema, using a single OCT scan. Our classification performance was excellent, with the caveat that validation in a much larger population is warranted. Our approach may have the potential to establish OCT as the mainstay of diagnostic imaging in neuro-ophthalmology.
△ Less
Submitted 18 December, 2021;
originally announced December 2021.
-
Interaction-Aware Trajectory Prediction and Planning for Autonomous Vehicles in Forced Merge Scenarios
Authors:
Kaiwen Liu,
Nan Li,
H. Eric Tseng,
Ilya Kolmanovsky,
Anouck Girard
Abstract:
Merging is, in general, a challenging task for both human drivers and autonomous vehicles, especially in dense traffic, because the merging vehicle typically needs to interact with other vehicles to identify or create a gap and safely merge into. In this paper, we consider the problem of autonomous vehicle control for forced merge scenarios. We propose a novel game-theoretic controller, called the…
▽ More
Merging is, in general, a challenging task for both human drivers and autonomous vehicles, especially in dense traffic, because the merging vehicle typically needs to interact with other vehicles to identify or create a gap and safely merge into. In this paper, we consider the problem of autonomous vehicle control for forced merge scenarios. We propose a novel game-theoretic controller, called the Leader-Follower Game Controller (LFGC), in which the interactions between the autonomous ego vehicle and other vehicles with a priori uncertain driving intentions is modeled as a partially observable leader-follower game. The LFGC estimates the other vehicles' intentions online based on observed trajectories, and then predicts their future trajectories and plans the ego vehicle's own trajectory using Model Predictive Control (MPC) to simultaneously achieve probabilistically guaranteed safety and merging objectives. To verify the performance of LFGC, we test it in simulations and with the NGSIM data, where the LFGC demonstrates a high success rate of 97.5% in merging.
△ Less
Submitted 14 December, 2021;
originally announced December 2021.
-
Energy-Efficient Autonomous Driving Using Cognitive Driver Behavioral Models and Reinforcement Learning
Authors:
Huayi Li,
Nan Li,
Ilya Kolmanovsky,
Anouck Girard
Abstract:
Autonomous driving technologies are expected to not only improve mobility and road safety but also bring energy efficiency benefits. In the foreseeable future, autonomous vehicles (AVs) will operate on roads shared with human-driven vehicles. To maintain safety and liveness while simultaneously minimizing energy consumption, the AV planning and decision-making process should account for interactio…
▽ More
Autonomous driving technologies are expected to not only improve mobility and road safety but also bring energy efficiency benefits. In the foreseeable future, autonomous vehicles (AVs) will operate on roads shared with human-driven vehicles. To maintain safety and liveness while simultaneously minimizing energy consumption, the AV planning and decision-making process should account for interactions between the autonomous ego vehicle and surrounding human-driven vehicles. In this chapter, we describe a framework for developing energy-efficient autonomous driving policies on shared roads by exploiting human-driver behavior modeling based on cognitive hierarchy theory and reinforcement learning.
△ Less
Submitted 27 November, 2021;
originally announced November 2021.
-
The Three-Dimensional Structural Configuration of the Central Retinal Vessel Trunk and Branches as a Glaucoma Biomarker
Authors:
Satish K. Panda,
Haris Cheong,
Tin A. Tun,
Thanadet Chuangsuwanich,
Aiste Kadziauskiene,
Vijayalakshmi Senthil,
Ramaswami Krishnadas,
Martin L. Buist,
Shamira Perera,
Ching-Yu Cheng,
Tin Aung,
Alexandre H. Thiery,
Michael J. A. Girard
Abstract:
Purpose: To assess whether the three-dimensional (3D) structural configuration of the central retinal vessel trunk and its branches (CRVT&B) could be used as a diagnostic marker for glaucoma. Method: We trained a deep learning network to automatically segment the CRVT&B from the B-scans of the optical coherence tomography (OCT) volume of the optic nerve head (ONH). Subsequently, two different appr…
▽ More
Purpose: To assess whether the three-dimensional (3D) structural configuration of the central retinal vessel trunk and its branches (CRVT&B) could be used as a diagnostic marker for glaucoma. Method: We trained a deep learning network to automatically segment the CRVT&B from the B-scans of the optical coherence tomography (OCT) volume of the optic nerve head (ONH). Subsequently, two different approaches were used for glaucoma diagnosis using the structural configuration of the CRVT&B as extracted from the OCT volumes. In the first approach, we aimed to provide a diagnosis using only 3D CNN and the 3D structure of the CRVT&B. For the second approach, we projected the 3D structure of the CRVT&B orthographically onto three planes to obtain 2D images, and then a 2D CNN was used for diagnosis. The segmentation accuracy was evaluated using the Dice coefficient, whereas the diagnostic accuracy was assessed using the area under the receiver operating characteristic curves (AUC). The diagnostic performance of the CRVT&B was also compared with that of retinal nerve fiber layer (RNFL) thickness. Results: Our segmentation network was able to efficiently segment retinal blood vessels from OCT scans. On a test set, we achieved a Dice coefficient of 0.81\pm0.07. The 3D and 2D diagnostic networks were able to differentiate glaucoma from non-glaucoma subjects with accuracies of 82.7% and 83.3%, respectively. The corresponding AUCs for CRVT&B were 0.89 and 0.90, higher than those obtained with RNFL thickness alone. Conclusions: Our work demonstrated that the diagnostic power of the CRVT&B is superior to that of a gold-standard glaucoma parameter, i.e., RNFL thickness. Our work also suggested that the major retinal blood vessels form a skeleton -- the configuration of which may be representative of major ONH structural changes as typically observed with the development and progression of glaucoma.
△ Less
Submitted 8 November, 2021; v1 submitted 7 November, 2021;
originally announced November 2021.
-
Set-theoretic Localization for Mobile Robots with Infrastructure-based Sensing
Authors:
Xiao Li,
Yutong Li,
Nan Li,
Anouck Girard,
Ilya Kolmanovsky
Abstract:
In this paper, we introduce a set-theoretic approach for mobile robot localization with infrastructure-based sensing. The proposed method computes sets that over-bound the robot body and orientation under an assumption of known noise bounds on the sensor and robot motion model. We establish theoretical properties and computational approaches for this set-theoretic localization approach and illustr…
▽ More
In this paper, we introduce a set-theoretic approach for mobile robot localization with infrastructure-based sensing. The proposed method computes sets that over-bound the robot body and orientation under an assumption of known noise bounds on the sensor and robot motion model. We establish theoretical properties and computational approaches for this set-theoretic localization approach and illustrate its application to an automated valet parking example in simulations and to omnidirectional robot localization problems in real-world experiments. We demonstrate that the set-theoretic localization method can perform robustly against uncertainty set initialization and sensor noises compared to the FastSLAM.
△ Less
Submitted 27 August, 2022; v1 submitted 4 October, 2021;
originally announced October 2021.
-
Safe Reinforcement Learning Using Robust Action Governor
Authors:
Yutong Li,
Nan Li,
H. Eric Tseng,
Anouck Girard,
Dimitar Filev,
Ilya Kolmanovsky
Abstract:
Reinforcement Learning (RL) is essentially a trial-and-error learning procedure which may cause unsafe behavior during the exploration-and-exploitation process. This hinders the application of RL to real-world control problems, especially to those for safety-critical systems. In this paper, we introduce a framework for safe RL that is based on integration of a RL algorithm with an add-on safety su…
▽ More
Reinforcement Learning (RL) is essentially a trial-and-error learning procedure which may cause unsafe behavior during the exploration-and-exploitation process. This hinders the application of RL to real-world control problems, especially to those for safety-critical systems. In this paper, we introduce a framework for safe RL that is based on integration of a RL algorithm with an add-on safety supervision module, called the Robust Action Governor (RAG), which exploits set-theoretic techniques and online optimization to manage safety-related requirements during learning. We illustrate this proposed safe RL framework through an application to automotive adaptive cruise control.
△ Less
Submitted 30 April, 2021; v1 submitted 21 February, 2021;
originally announced February 2021.
-
Safe Learning Reference Governor: Theory and Application to Fuel Truck Rollover Avoidance
Authors:
Kaiwen Liu,
Nan Li,
Ilya Kolmanovsky,
Denise Rizzo,
Anouck Girard
Abstract:
This paper proposes a learning reference governor (LRG) approach to enforce state and control constraints in systems for which an accurate model is unavailable, and this approach enables the reference governor to gradually improve command tracking performance through learning while enforcing the constraints during learning and after learning is completed. The learning can be performed either on a…
▽ More
This paper proposes a learning reference governor (LRG) approach to enforce state and control constraints in systems for which an accurate model is unavailable, and this approach enables the reference governor to gradually improve command tracking performance through learning while enforcing the constraints during learning and after learning is completed. The learning can be performed either on a black-box type model of the system or directly on the hardware. After introducing the LRG algorithm and outlining its theoretical properties, this paper investigates LRG application to fuel truck (tank truck) rollover avoidance. Through simulations based on a fuel truck model that accounts for liquid fuel sloshing effects, we show that the proposed LRG can effectively protect fuel trucks from rollover accidents under various operating conditions.
△ Less
Submitted 8 September, 2021; v1 submitted 22 January, 2021;
originally announced January 2021.
-
Describing the Structural Phenotype of the Glaucomatous Optic Nerve Head Using Artificial Intelligence
Authors:
Satish K. Panda,
Haris Cheong,
Tin A. Tun,
Sripad K. Devella,
Ramaswami Krishnadas,
Martin L. Buist,
Shamira Perera,
Ching-Yu Cheng,
Tin Aung,
Alexandre H. Thiéry,
Michaël J. A. Girard
Abstract:
The optic nerve head (ONH) typically experiences complex neural- and connective-tissue structural changes with the development and progression of glaucoma, and monitoring these changes could be critical for improved diagnosis and prognosis in the glaucoma clinic. The gold-standard technique to assess structural changes of the ONH clinically is optical coherence tomography (OCT). However, OCT is li…
▽ More
The optic nerve head (ONH) typically experiences complex neural- and connective-tissue structural changes with the development and progression of glaucoma, and monitoring these changes could be critical for improved diagnosis and prognosis in the glaucoma clinic. The gold-standard technique to assess structural changes of the ONH clinically is optical coherence tomography (OCT). However, OCT is limited to the measurement of a few hand-engineered parameters, such as the thickness of the retinal nerve fiber layer (RNFL), and has not yet been qualified as a stand-alone device for glaucoma diagnosis and prognosis applications. We argue this is because the vast amount of information available in a 3D OCT scan of the ONH has not been fully exploited. In this study we propose a deep learning approach that can: \textbf{(1)} fully exploit information from an OCT scan of the ONH; \textbf{(2)} describe the structural phenotype of the glaucomatous ONH; and that can \textbf{(3)} be used as a robust glaucoma diagnosis tool. Specifically, the structural features identified by our algorithm were found to be related to clinical observations of glaucoma. The diagnostic accuracy from these structural features was $92.0 \pm 2.3 \%$ with a sensitivity of $90.0 \pm 2.4 \% $ (at $95 \%$ specificity). By changing their magnitudes in steps, we were able to reveal how the morphology of the ONH changes as one transitions from a `non-glaucoma' to a `glaucoma' condition. We believe our work may have strong clinical implication for our understanding of glaucoma pathogenesis, and could be improved in the future to also predict future loss of vision.
△ Less
Submitted 17 December, 2020;
originally announced December 2020.
-
OCT-GAN: Single Step Shadow and Noise Removal from Optical Coherence Tomography Images of the Human Optic Nerve Head
Authors:
Haris Cheong,
Sripad Krishna Devalla,
Thanadet Chuangsuwanich,
Tin A. Tun,
Xiaofei Wang,
Tin Aung,
Leopold Schmetterer,
Martin L. Buist,
Craig Boote,
Alexandre H. Thiéry,
Michaël J. A. Girard
Abstract:
Speckle noise and retinal shadows within OCT B-scans occlude important edges, fine textures and deep tissues, preventing accurate and robust diagnosis by algorithms and clinicians. We developed a single process that successfully removed both noise and retinal shadows from unseen single-frame B-scans within 10.4ms. Mean average gradient magnitude (AGM) for the proposed algorithm was 57.2% higher th…
▽ More
Speckle noise and retinal shadows within OCT B-scans occlude important edges, fine textures and deep tissues, preventing accurate and robust diagnosis by algorithms and clinicians. We developed a single process that successfully removed both noise and retinal shadows from unseen single-frame B-scans within 10.4ms. Mean average gradient magnitude (AGM) for the proposed algorithm was 57.2% higher than current state-of-the-art, while mean peak signal to noise ratio (PSNR), contrast to noise ratio (CNR), and structural similarity index metric (SSIM) increased by 11.1%, 154% and 187% respectively compared to single-frame B-scans. Mean intralayer contrast (ILC) improvement for the retinal nerve fiber layer (RNFL), photoreceptor layer (PR) and retinal pigment epithelium (RPE) layers decreased from 0.362 \pm 0.133 to 0.142 \pm 0.102, 0.449 \pm 0.116 to 0.0904 \pm 0.0769, 0.381 \pm 0.100 to 0.0590 \pm 0.0451 respectively. The proposed algorithm reduces the necessity for long image acquisition times, minimizes expensive hardware requirements and reduces motion artifacts in OCT images.
△ Less
Submitted 6 October, 2020;
originally announced October 2020.
-
A Game Theoretic Approach for Parking Spot Search with Limited Parking Lot Information
Authors:
Yutong Li,
Nan Li,
H. Eric Tseng,
Suzhou Huang,
Ilya Kolmanovsky,
Anouck Girard,
Dimitar Filev
Abstract:
We propose a game theoretic approach to address the problem of searching for available parking spots in a parking lot and picking the ``optimal'' one to park. The approach exploits limited information provided by the parking lot, i.e., its layout and the current number of cars in it. Considering the fact that such information is or can be easily made available for many structured parking lots, the…
▽ More
We propose a game theoretic approach to address the problem of searching for available parking spots in a parking lot and picking the ``optimal'' one to park. The approach exploits limited information provided by the parking lot, i.e., its layout and the current number of cars in it. Considering the fact that such information is or can be easily made available for many structured parking lots, the proposed approach can be applicable without requiring major updates to existing parking facilities. For large parking lots, a sampling-based strategy is integrated with the proposed approach to overcome the associated computational challenge. The proposed approach is compared against a state-of-the-art heuristic-based parking spot search strategy in the literature through simulation studies and demonstrates its advantage in terms of achieving lower cost function values.
△ Less
Submitted 11 May, 2020;
originally announced May 2020.
-
Towards Label-Free 3D Segmentation of Optical Coherence Tomography Images of the Optic Nerve Head Using Deep Learning
Authors:
Sripad Krishna Devalla,
Tan Hung Pham,
Satish Kumar Panda,
Liang Zhang,
Giridhar Subramanian,
Anirudh Swaminathan,
Chin Zhi Yun,
Mohan Rajan,
Sujatha Mohan,
Ramaswami Krishnadas,
Vijayalakshmi Senthil,
John Mark S. de Leon,
Tin A. Tun,
Ching-Yu Cheng,
Leopold Schmetterer,
Shamira Perera,
Tin Aung,
Alexandre H. Thiery,
Michael J. A. Girard
Abstract:
Since the introduction of optical coherence tomography (OCT), it has been possible to study the complex 3D morphological changes of the optic nerve head (ONH) tissues that occur along with the progression of glaucoma. Although several deep learning (DL) techniques have been recently proposed for the automated extraction (segmentation) and quantification of these morphological changes, the device s…
▽ More
Since the introduction of optical coherence tomography (OCT), it has been possible to study the complex 3D morphological changes of the optic nerve head (ONH) tissues that occur along with the progression of glaucoma. Although several deep learning (DL) techniques have been recently proposed for the automated extraction (segmentation) and quantification of these morphological changes, the device specific nature and the difficulty in preparing manual segmentations (training data) limit their clinical adoption. With several new manufacturers and next-generation OCT devices entering the market, the complexity in deploying DL algorithms clinically is only increasing. To address this, we propose a DL based 3D segmentation framework that is easily translatable across OCT devices in a label-free manner (i.e. without the need to manually re-segment data for each device). Specifically, we developed 2 sets of DL networks. The first (referred to as the enhancer) was able to enhance OCT image quality from 3 OCT devices, and harmonized image-characteristics across these devices. The second performed 3D segmentation of 6 important ONH tissue layers. We found that the use of the enhancer was critical for our segmentation network to achieve device independency. In other words, our 3D segmentation network trained on any of 3 devices successfully segmented ONH tissue layers from the other two devices with high performance (Dice coefficients > 0.92). With such an approach, we could automatically segment images from new OCT devices without ever needing manual segmentation data from such devices.
△ Less
Submitted 22 February, 2020;
originally announced February 2020.
-
Rapid Uncertainty Propagation and Chance-Constrained Path Planning for Small Unmanned Aerial Vehicles
Authors:
Andrew W. Berning Jr.,
Anouck Girard,
Ilya Kolmanovsky,
Sarah N. D'Souza
Abstract:
With the number of small Unmanned Aircraft Systems (sUAS) in the national airspace projected to increase in the next few years, there is growing interest in a traffic management system capable of handling the demands of this aviation sector. It is expected that such a system will involve trajectory prediction, uncertainty propagation, and path planning algorithms. In this work, we use linear covar…
▽ More
With the number of small Unmanned Aircraft Systems (sUAS) in the national airspace projected to increase in the next few years, there is growing interest in a traffic management system capable of handling the demands of this aviation sector. It is expected that such a system will involve trajectory prediction, uncertainty propagation, and path planning algorithms. In this work, we use linear covariance propagation in combination with a quadratic programming-based collision detection algorithm to rapidly validate declared flight plans. Additionally, these algorithms are combined with a Dynamic, Informed RRT* algorithm, resulting in a computationally efficient algorithm for chance-constrained path planning. Detailed numerical examples for both fixed-wing and quadrotor sUAS models are presented.
△ Less
Submitted 6 November, 2019;
originally announced November 2019.
-
Deep Reinforcement Learning with Enhanced Safety for Autonomous Highway Driving
Authors:
Ali Baheri,
Subramanya Nageshrao,
H. Eric Tseng,
Ilya Kolmanovsky,
Anouck Girard,
Dimitar Filev
Abstract:
In this paper, we present a safe deep reinforcement learning system for automated driving. The proposed framework leverages merits of both rule-based and learning-based approaches for safety assurance. Our safety system consists of two modules namely handcrafted safety and dynamically-learned safety. The handcrafted safety module is a heuristic safety rule based on common driving practice that ens…
▽ More
In this paper, we present a safe deep reinforcement learning system for automated driving. The proposed framework leverages merits of both rule-based and learning-based approaches for safety assurance. Our safety system consists of two modules namely handcrafted safety and dynamically-learned safety. The handcrafted safety module is a heuristic safety rule based on common driving practice that ensure a minimum relative gap to a traffic vehicle. On the other hand, the dynamically-learned safety module is a data-driven safety rule that learns safety patterns from driving data. Specifically, the dynamically-leaned safety module incorporates a model lookahead beyond the immediate reward of reinforcement learning to predict safety longer into the future. If one of the future states leads to a near-miss or collision, then a negative reward will be assigned to the reward function to avoid collision and accelerate the learning process. We demonstrate the capability of the proposed framework in a simulation environment with varying traffic density. Our results show the superior capabilities of the policy enhanced with dynamically-learned safety module.
△ Less
Submitted 23 April, 2020; v1 submitted 28 October, 2019;
originally announced October 2019.
-
Game-theoretic Modeling of Traffic in Unsignalized Intersection Network for Autonomous Vehicle Control Verification and Validation
Authors:
Ran Tian,
Nan Li,
Ilya Kolmanovsky,
Yildiray Yildiz,
Anouck Girard
Abstract:
For a foreseeable future, autonomous vehicles (AVs) will operate in traffic together with human-driven vehicles. Their planning and control systems need extensive testing, including early-stage testing in simulations where the interactions among autonomous/human-driven vehicles are represented. Motivated by the need for such simulation tools, we propose a game-theoretic approach to modeling vehicl…
▽ More
For a foreseeable future, autonomous vehicles (AVs) will operate in traffic together with human-driven vehicles. Their planning and control systems need extensive testing, including early-stage testing in simulations where the interactions among autonomous/human-driven vehicles are represented. Motivated by the need for such simulation tools, we propose a game-theoretic approach to modeling vehicle interactions, in particular, for urban traffic environments with unsignalized intersections. We develop traffic models with heterogeneous (in terms of their driving styles) and interactive vehicles based on our proposed approach, and use them for virtual testing, evaluation, and calibration of AV control systems. For illustration, we consider two AV control approaches, analyze their characteristics and performance based on the simulation results with our developed traffic models, and optimize the parameters of one of them.
△ Less
Submitted 17 July, 2020; v1 submitted 15 October, 2019;
originally announced October 2019.