Showing 1–31 of 31 results for author: Daniels, K

Terahertz Antenna Impedance Matched to a Graphene Photodetector

Authors: François Joint, Kunyi Zhang, Jayaprakash Poojali, Daniel Lewis, Michael Pedowitz, Brendan Jordan, Gyan Prakash, Ashraf Ali, Kevin Daniels, Rachael L. Myers-Ward, Thomas E. Murphy, Howard D. Drew

Abstract: Developing low-power, high-sensitivity photodetectors for the terahertz (THz) band that operate at room temperature is an important challenge in optoelectronics. In this study, we introduce a photo-thermal-electric (PTE) effect detector based on quasi-free standing bilayer graphene (BLG) on a silicon carbide (SiC) substrate, designed for the THz frequency range. Our detector's performance hinges o… ▽ More Developing low-power, high-sensitivity photodetectors for the terahertz (THz) band that operate at room temperature is an important challenge in optoelectronics. In this study, we introduce a photo-thermal-electric (PTE) effect detector based on quasi-free standing bilayer graphene (BLG) on a silicon carbide (SiC) substrate, designed for the THz frequency range. Our detector's performance hinges on a quasi-optical coupling scheme, which integrates an aspherical silicon lens, to optimize impedance matching between the THz antenna and the graphene p-n junction. At room temperature, we achieved a noise equivalent power (NEP) of less than 300 $pW/\sqrt{Hz}$. Through an impedance matching analysis, we coupled a planar antenna with a graphene p-n junction, inserted in parallel to the nano-gap of the antenna, via two coupling capacitors. By adjusting the capacitors and the antenna arm length, we tailored the antenna's maximum infrared power absorption to specific frequencies. The sensitivity, spectral properties, and scalability of our material make it an ideal candidate for future development of far-infrared detectors operating at room temperature. △ Less

Submitted 10 May, 2024; originally announced May 2024.

Comments: 21 pages, 4 figures

Interfacial Tension Hysteresis of Eutectic Gallium-Indium

Authors: Keith D. Hillaire, Praneshnandan Nithyanandam, Minyung Song, Sahar Rashid Nadimi, Abolfazl Kiani, Michael D. Dickey, Karen E. Daniels

Abstract: When in a pristine state, gallium and its alloys have the largest interfacial tensions of any liquid at room temperature. Nonetheless, applying as little as 0.8 V of electric potential across eutectic gallium indium (EGaIn) placed within aqueous NaOH (or other electrolyte) solution will cause the metal to behave as if its interfacial tension is near zero. The mechanism behind this phenomenon has r… ▽ More When in a pristine state, gallium and its alloys have the largest interfacial tensions of any liquid at room temperature. Nonetheless, applying as little as 0.8 V of electric potential across eutectic gallium indium (EGaIn) placed within aqueous NaOH (or other electrolyte) solution will cause the metal to behave as if its interfacial tension is near zero. The mechanism behind this phenomenon has remained poorly understood because NaOH dissolves the oxide species, making it difficult to directly measure the concentration, thickness, or chemical composition of the film that forms at the interface. In addition, the oxide layers formed are atomically-thin. Here, we present a suite of techniques which allow us to simultaneously measure both electrical and interfacial properties as a function of applied electric potential, allowing for new insights into the mechanisms which cause the dramatic decrease in interfacial tension. A key discovery from this work is that the interfacial tension displays hysteresis while lowering the applied potential. We combine these observations with electrochemical impedance spectroscopy to evaluate how these changes in interfacial tension arise from chemical, electrical, and mechanical changes on the interface, and close with ideas for how to build a free energy model to predict these changes from first principles. △ Less

Submitted 30 October, 2023; originally announced October 2023.

The Onset Acceleration for Surfactant Covered Faraday Waves

Authors: Stephen L. Strickland, Karen E. Daniels, Michael Shearer

Abstract: Faraday waves are gravity-capillary waves that emerge on the surface of a vertically vibrated fluid when the energy injected via vibration exceeds the energy lost due to viscous dissipation. Because this dissipation primarily occurs in the free surface boundary layer, their emergence is particularly sensitive to free surface properties including the surface tension, elasticity, and viscosity of su… ▽ More Faraday waves are gravity-capillary waves that emerge on the surface of a vertically vibrated fluid when the energy injected via vibration exceeds the energy lost due to viscous dissipation. Because this dissipation primarily occurs in the free surface boundary layer, their emergence is particularly sensitive to free surface properties including the surface tension, elasticity, and viscosity of surfactants present at the free surface. We study this sensitivity by considering a Newtonian fluid bath covered by an insoluble surfactant subject to vertical vibrations which produce sub-harmonic Faraday waves. By assuming a finite-depth, infinite-breadth, low-viscosity bulk fluid and accounting for surface tension, Marangoni, and Boussinesq effects, we derive an expression for the onset acceleration up to second order in the expansion parameter $Υ= \sqrt{\tfrac{1}{\mathcal{R}e}}$. We recover the results of previous numerical investigations, but only by modifying the Marangoni and Boussinesq numbers to account for the low-viscosity limit. The analytic expression allows us to consider a range of parameters not previously studied, including a wide variety of fluid depths and driving frequencies. In addition, we uncover regions of parameter space for which our model predicts that the addition of surfactant would lower, rather than elevate, the onset acceleration. We discuss the possible use of this model in developing a surface viscometer for surfactant monolayers. △ Less

Submitted 2 August, 2023; originally announced August 2023.

Comments: 31 pages , 12 figures , 3 tables , 3 appendices

Soft matter physics of the ground beneath our feet

Authors: Anne Voigtländer, Morgane Houssais, Karol A. Bacik, Ian C. Bourg, Justin C. Burton, Karen E. Daniels, Sujit S. Datta, Emanuela Del Gado, Nakul S. Deshpande, Olivier Devauchelle, Behrooz Ferdowsi, Rachel Glade, Lucas Goehring, Ian J. Hewitt, Douglas Jerolmack, Ruben Juanes, Arshad Kudrolli, Ching-Yao Lai, Wei Li, Claire Masteller, Kavinda Nissanka, Allan M. Rubin, Howard A. Stone, Jenny Suckale, Nathalie M. Vriend , et al. (2 additional authors not shown)

Abstract: Inspired by presentations by the authors during a workshop organized at the Princeton Center for Theoretical Science (PCTS) in January 2022, we present a perspective on some of the outstanding questions related to the "physics of the ground beneath our feet." These identified challenges are intrinsically shared with the field of Soft Matter but also have unique aspects when the natural environment… ▽ More Inspired by presentations by the authors during a workshop organized at the Princeton Center for Theoretical Science (PCTS) in January 2022, we present a perspective on some of the outstanding questions related to the "physics of the ground beneath our feet." These identified challenges are intrinsically shared with the field of Soft Matter but also have unique aspects when the natural environment is studied. △ Less

Submitted 31 July, 2023; originally announced August 2023.

Comments: Perspective Paper, 30 pages, 15 figures

Strong transient magnetic fields induced by THz-driven plasmons in graphene disks

Authors: Jeong Woo Han, Pavlo Sai, Dmytro But, Ece Uykur, Stephan Winnerl, Gagan Kumar, Matthew L. Chin, Rachael L. Myers-Ward, Matthew T. Dejarld, Kevin M. Daniels, Thomas E. Murphy, Wojciech Knap, Martin Mittendorff

Abstract: Strong circularly polarized excitation opens up the possibility to generate and control effective magnetic fields in solid state systems, e.g., via the optical inverse Faraday effect or the phonon inverse Faraday effect. While these effects rely on material properties that can be tailored only to a limited degree, plasmonic resonances can be fully controlled by choosing proper dimensions and carri… ▽ More Strong circularly polarized excitation opens up the possibility to generate and control effective magnetic fields in solid state systems, e.g., via the optical inverse Faraday effect or the phonon inverse Faraday effect. While these effects rely on material properties that can be tailored only to a limited degree, plasmonic resonances can be fully controlled by choosing proper dimensions and carrier concentrations. Plasmon resonances provide new degrees of freedom that can be used to tune or enhance the light-induced magnetic field in engineered metamaterials. Here we employ graphene disks to demonstrate light-induced transient magnetic fields from a plasmonic circular current with extremely high efficiency. The effective magnetic field at the plasmon resonance frequency of the graphene disks (3.5 THz) is evidenced by a strong (~1°) ultrafast Faraday rotation (~ 20 ps). In accordance with reference measurements and simulations, we estimated the strength of the induced magnetic field to be on the order of 0.7 T under a moderate pump fluence of about 440 nJ cm-2. △ Less

Submitted 10 July, 2023; originally announced July 2023.

Journal ref: Nature Communications 14, 7493 (2023)

Forecasting landslides using community detection on geophysical satellite data

Authors: Vrinda Desai, Farnaz Fazelpour, Alexander L. Handwerger, Karen E. Daniels

Abstract: As a result of extreme weather conditions, such as heavy precipitation, natural hillslopes can fail dramatically; these slope failures can occur on a dry day due to time lags between rainfall and pore-water pressure change at depth, or even after days to years of slow-motion. While the pre-failure deformation is sometimes apparent in retrospect, it remains challenging to predict the sudden transit… ▽ More As a result of extreme weather conditions, such as heavy precipitation, natural hillslopes can fail dramatically; these slope failures can occur on a dry day due to time lags between rainfall and pore-water pressure change at depth, or even after days to years of slow-motion. While the pre-failure deformation is sometimes apparent in retrospect, it remains challenging to predict the sudden transition from gradual deformation (creep) to runaway failure. We use a network science method -- multilayer modularity optimization -- to investigate the spatiotemporal patterns of deformation in a region near the 2017 Mud Creek, California landslide. We transform satellite radar data from the study site into a spatially-embedded network in which the nodes are patches of ground and the edges connect the nearest neighbors, with a series of layers representing consecutive transits of the satellite. Each edge is weighted by the product of the local slope (susceptibility to failure) measured from a digital elevation model and ground surface deformation (current rheological state) from interferometric synthetic aperture radar (InSAR). We use multilayer modularity optimization to identify strongly-connected clusters of nodes (communities) and are able to identify both the location of Mud Creek and nearby creeping landslides which have not yet failed. We develop a metric, community persistence, to quantify patterns of ground deformation leading up to failure, and find that this metric increases from a baseline value in the weeks leading up to Mud Creek's failure. These methods promise as a technique for highlighting regions at risk of catastrophic failure. △ Less

Submitted 13 May, 2023; v1 submitted 22 December, 2022; originally announced December 2022.

Comments: 10 pages, 7 figures

Reservoir Computing with 3D Nanowire Networks

Authors: R. K. Daniels, J. B. Mallinson, Z. E. Heywood, P. J. Bones, M. D. Arnold, S. A. Brown

Abstract: Networks of nanowires are currently being explored for a range of applications in brain-like (or neuromorphic) computing, and especially in reservoir computing (RC). Fabrication of real-world computing devices requires that the nanowires are deposited sequentially, leading to stacking of the wires on top of each other. However, most simulations of computational tasks using these systems treat the… ▽ More Networks of nanowires are currently being explored for a range of applications in brain-like (or neuromorphic) computing, and especially in reservoir computing (RC). Fabrication of real-world computing devices requires that the nanowires are deposited sequentially, leading to stacking of the wires on top of each other. However, most simulations of computational tasks using these systems treat the nanowires as 1D objects lying in a perfectly 2D plane - the effect of stacking on RC performance has not yet been established. Here we use detailed simulations to compare the performance of perfectly 2D and quasi-3D (stacked) networks of nanowires in two tasks: memory capacity and nonlinear transformation. We also show that our model of the junctions between nanowires is general enough to describe a wide range of memristive networks, and consider the impact of physically realistic electrode configurations on performance. We show that the various networks and configurations have a strikingly similar performance in RC tasks, which is surprising given their radically different topologies. Our results show that networks with an experimentally achievable number of electrodes perform close to the upper bounds achievable when using the information from every wire. However, we also show important differences, in particular that the quasi-3D networks are more resilient to changes in the input parameters, generalizing better to noisy training data. Since previous literature suggests that topology plays an important role in computing performance, these results may have important implications for future applications of nanowire networks in neuromorphic computing. △ Less

Submitted 6 July, 2022; originally announced July 2022.

Photoelastic Stress Response of Complex 3D-Printed Particle Shapes

Authors: Negin Amini, Josh Tuohey, John M. Long, Jun Zhang, David A. V. Morton, Karen Daniels, Farnaz Fazelpour, Karen P. Hapgood

Abstract: While stress visualization within 3-dimensional particles would greatly advance our understanding of the behaviors of complex particles, traditional photoelastic methods suffer from a lack of available technology for producing suitable complex particles. Recently, 3D-printing has created new possibilities for enhancing the scope of stress analysis within physically representative granules. Here, w… ▽ More While stress visualization within 3-dimensional particles would greatly advance our understanding of the behaviors of complex particles, traditional photoelastic methods suffer from a lack of available technology for producing suitable complex particles. Recently, 3D-printing has created new possibilities for enhancing the scope of stress analysis within physically representative granules. Here, we investigate and evaluate opportunities offered by 3D-printing a single particle with a complex external shape with photoelastic properties. We report the results of X-ray computed tomography and 3D-printing, combined with traditional photoelastic analysis, to visualize strain for particles ranging from simple 2D discs to complex 3D printed coffee beans, including with internal voids. We find that the relative orientation of the print layers and the loading force affects the optical response of the discs, but without a significant difference in their mechanical properties. Furthermore, we present semi-quantitative measurements of stresses within 3D-printed complex particles. The paper outlines the potential limitations and areas of future interest for stress visualization of 3-dimensional particles. △ Less

Submitted 16 May, 2022; originally announced May 2022.

Stress propagation in locally loaded packings of disks and pentagons

Authors: Ryan Kozlowski, Hu Zheng, Karen E. Daniels, Joshua E. S. Socolar

Abstract: The mechanical strength and flow of granular materials can depend strongly on the shapes of individual grains. We report quantitative results obtained from photoelasticimetry experiments on locally loaded, quasi-two-dimensional granular packings of either disks or pentagons exhibiting stick-slip dynamics. Packings of pentagons resist the intruder at significantly lower packing fractions than packi… ▽ More The mechanical strength and flow of granular materials can depend strongly on the shapes of individual grains. We report quantitative results obtained from photoelasticimetry experiments on locally loaded, quasi-two-dimensional granular packings of either disks or pentagons exhibiting stick-slip dynamics. Packings of pentagons resist the intruder at significantly lower packing fractions than packings of disks, transmitting stresses from the intruder to the boundaries over a smaller spatial extent. Moreover, packings of pentagons feature significantly fewer back-bending force chains than packings of disks. Data obtained on the forward spatial extent of stresses and back-bending force chains collapse when the packing fraction is rescaled according to the packing fraction of steady state open channel formation, though data on intruder forces and dynamics do not collapse. We comment on the influence of system size on these findings and highlight connections with the dynamics of the disks and pentagons during slip events. △ Less

Submitted 13 October, 2021; v1 submitted 13 August, 2021; originally announced August 2021.

Comments: Updated after referee comments - new subsection 3.3 added along with a new figure; introduction reorganized; a few more details specified in the Methods section

Nanowire networks: how does small-world character evolve with dimensionality?

Authors: Ryan K. Daniels, Simon A. Brown

Abstract: Networks of nanowires are currently under consideration for a wide range of electronic and optoelectronic applications. Nanowire devices are usually made by sequential deposition, which inevitably leads to stacking of the wires on top of one another. Here we demonstrate the effect of stacking on the topology of the resulting networks. We compare perfectly 2D networks with quasi3D networks, and com… ▽ More Networks of nanowires are currently under consideration for a wide range of electronic and optoelectronic applications. Nanowire devices are usually made by sequential deposition, which inevitably leads to stacking of the wires on top of one another. Here we demonstrate the effect of stacking on the topology of the resulting networks. We compare perfectly 2D networks with quasi3D networks, and compare both nanowire networks to the corresponding Watts Strogatz networks, which are standard benchmark systems. By investigating quantities such as clustering, path length, modularity, and small world propensity we show that the connectivity of the quasi-3D networks is significantly different to that of the 2D networks, a result which may have important implications for applications of nanowire networks. △ Less

Submitted 10 May, 2021; originally announced May 2021.

Comments: To be published in Nanoscale Horizons

Interfacial Tension Modulation of Liquid Metal via Electrochemical Oxidation

Authors: Minyung Song, Karen E. Daniels, Abolfazl Kiani, Sahar Rashidnadimi, Michael D. Dickey

Abstract: This progress report summarizes recent studies of electrochemical oxidation to modulate the interfacial tension of gallium-based alloys. These alloys, which are liquid at ambient conditions, have the largest interfacial tension of any liquid at room temperature. The ability to modulate the tension offers the possibility to create forces that change the shape and position of the metal. It has been… ▽ More This progress report summarizes recent studies of electrochemical oxidation to modulate the interfacial tension of gallium-based alloys. These alloys, which are liquid at ambient conditions, have the largest interfacial tension of any liquid at room temperature. The ability to modulate the tension offers the possibility to create forces that change the shape and position of the metal. It has been known since the late 1800s that electrocapillarity-the use of potential to modulate the electric double layer on the surface of metals in electrolyte-lowers the interfacial tension of liquid metal. Yet, this phenomenon can only achieve modest changes in interfacial tension since it is limited to potential windows that avoid reactions. A recent discovery suggests that reactions driven by the electrochemical oxidation of gallium alloys cause the interfacial tension to decrease from ~500 mN/m at 0 V to ~0 mN/m at ~0.8 V, a change in tension that goes well beyond what is possible via conventional electrocapillarity or surfactants. The changes in tension are reversible; reductive potentials return the metal back to a state of high interfacial tension. This report aims to summarize key work and introduce beginners to this field by including electrochemistry basics while addressing misconceptions. We discuss applications that utilize modulations in interfacial tension of liquid metal and conclude with remaining opportunities and challenges that need further investigation. △ Less

Submitted 3 February, 2021; originally announced February 2021.

Marangoni Fingering Instabilities in Oxidizing Liquid Metals

Authors: Keith D. Hillaire, Michael D. Dickey, Karen E. Daniels

Abstract: Eutectic gallium-indium (EGaIn), a room-temperature liquid metal alloy, has the largest tension of any liquid at room temperature, and yet can nonetheless undergo fingering instabilities. This effect arises because, under an applied voltage, oxides deposit on the surface of the metal, which leads to a lowering of the interfacial tension, allowing spreading under gravity. Understanding the spreadin… ▽ More Eutectic gallium-indium (EGaIn), a room-temperature liquid metal alloy, has the largest tension of any liquid at room temperature, and yet can nonetheless undergo fingering instabilities. This effect arises because, under an applied voltage, oxides deposit on the surface of the metal, which leads to a lowering of the interfacial tension, allowing spreading under gravity. Understanding the spreading dynamics of room temperature liquid metals is important for developing soft electronics and understanding fluid dynamics of liquids with extreme surface tensions. When the applied voltage or the oxidation rate becomes too high, the EGaIn undergoes fingering instabilities, including tip-splitting, which occur due to a Marangoni stress on the interface. Our experiments are performed with EGaIn droplets placed in an electrolyte (sodium hydroxide); by placing the EGaIn on copper electrodes, which EGaIn readily wets, we are able to control the initial width of EGaIn fingers, setting the initial conditions of the spreading. Two transitions are observed: (1) a minimum current density at which all fingers become unstable to narrower fingers; (2) a current density at which the wider fingers undergo a single splitting event into two narrower fingers. We present a phase diagram as a function of current density and initial finger width, and identify the minimum width below which the single tip-splitting does not occur. △ Less

Submitted 19 November, 2020; originally announced November 2020.

Particle Size Effects in Flow-Stabilized Solids

Authors: Scott Lindauer, Carlos P. Ortiz, Robert Riehn, Karen E. Daniels

Abstract: Flow-stabilized solids are a class of fragile matter that forms when a dense suspension of colloids accumulates against a semi-permeable barrier, for flow rates above a critical value. In order to probe the effect of particle size on the formation of these solids, we perform experiments on micron-sized monodisperse spherical polystyrene spheres in a Hele-Shaw geometry. We examine the spatial exten… ▽ More Flow-stabilized solids are a class of fragile matter that forms when a dense suspension of colloids accumulates against a semi-permeable barrier, for flow rates above a critical value. In order to probe the effect of particle size on the formation of these solids, we perform experiments on micron-sized monodisperse spherical polystyrene spheres in a Hele-Shaw geometry. We examine the spatial extent, internal fluctuations, and fluid permeability of the solids deposited against the barrier, and find that these do not scale with the Péclet number. Instead, we find distinct behaviors at higher Peclet numbers, suggesting a transition from thermal- to athermal-solids which we connect to particle-scale fluctuations in the liquid-like layer at the upstream surface of the solid. We further observe that while the Carman-Kozeny model does not accurately predict the permeability of flow-stabilized solids, we do find a new scaling which predicts the permeability. △ Less

Submitted 10 September, 2019; originally announced September 2019.

Viewing Earth's surface as a soft matter landscape

Authors: Douglas J. Jerolmack, Karen E. Daniels

Abstract: The Earth's surface is composed of a staggering diversity of particulate-fluid mixtures: dry to wet, dilute to dense, colloidal to granular, and attractive to repulsive particles. This material variety is matched by the range of relevant stresses and strain rates, from laminar to turbulent flows, and steady to intermittent forcing, leading to anything from rapid and catastrophic landslides to the… ▽ More The Earth's surface is composed of a staggering diversity of particulate-fluid mixtures: dry to wet, dilute to dense, colloidal to granular, and attractive to repulsive particles. This material variety is matched by the range of relevant stresses and strain rates, from laminar to turbulent flows, and steady to intermittent forcing, leading to anything from rapid and catastrophic landslides to the slow relaxation of soil and rocks over geologic timescales. Geophysical flows sculpt landscapes, but also threaten human lives and infrastructure. From a physics point of view, virtually all Earth and planetary landscapes are composed of soft matter, in the sense they are both deformable and sensitive to collective effects. Geophysical materials, however, often involve compositions and flow geometries that have not yet been examined in physics. In this review we explore how a soft-matter perspective has helped to illuminate, and even predict, the rich dynamics of Earth materials and their associated landscapes. We also highlight some novel phenomena of geophysical flows that challenge, and will hopefully inspire, more fundamental work in soft matter. △ Less

Submitted 11 March, 2019; originally announced March 2019.

Network Analysis of Particles and Grains

Authors: Lia Papadopoulos, Mason A. Porter, Karen E. Daniels, Danielle S. Bassett

Abstract: The arrangements of particles and forces in granular materials have a complex organization on multiple spatial scales that ranges from local structures to mesoscale and system-wide ones. This multiscale organization can affect how a material responds or reconfigures when exposed to external perturbations or loading. The theoretical study of particle-level, force-chain, domain, and bulk properties… ▽ More The arrangements of particles and forces in granular materials have a complex organization on multiple spatial scales that ranges from local structures to mesoscale and system-wide ones. This multiscale organization can affect how a material responds or reconfigures when exposed to external perturbations or loading. The theoretical study of particle-level, force-chain, domain, and bulk properties requires the development and application of appropriate physical, mathematical, statistical, and computational frameworks. Traditionally, granular materials have been investigated using particulate or continuum models, each of which tends to be implicitly agnostic to multiscale organization. Recently, tools from network science have emerged as powerful approaches for probing and characterizing heterogeneous architectures across different scales in complex systems, and a diverse set of methods have yielded fascinating insights into granular materials. In this paper, we review work on network-based approaches to studying granular matter and explore the potential of such frameworks to provide a useful description of these systems and to enhance understanding of their underlying physics. We also outline a few open questions and highlight particularly promising future directions in the analysis and design of granular matter and other kinds of material networks. △ Less

Submitted 10 December, 2017; v1 submitted 27 August, 2017; originally announced August 2017.

Granular rheology: measuring boundary forces with laser-cut leaf springs

Authors: Zhu Tang, Theodore A. Brzinski, Karen E. Daniels

Abstract: In granular physics experiments, it is a persistent challenge to obtain the boundary stress measurements necessary to provide full a rheological characterization of the dynamics. Here, we describe a new technique by which the outer boundary of a 2D Couette cell both confines the granular material and provides spatially- and temporally- resolved stress measurements. This key advance is enabled by d… ▽ More In granular physics experiments, it is a persistent challenge to obtain the boundary stress measurements necessary to provide full a rheological characterization of the dynamics. Here, we describe a new technique by which the outer boundary of a 2D Couette cell both confines the granular material and provides spatially- and temporally- resolved stress measurements. This key advance is enabled by desktop laser-cutting technology, which allows us to design and cut linearly-deformable walls with a specified spring constant. By tracking the position of each segment of the wall, we measure both the normal and tangential stress throughout the experiment. This permits us to calculate the amount of shear stress provided by basal friction, and thereby determine accurate values of $μ(I)$. △ Less

Submitted 26 April, 2017; originally announced April 2017.

Comments: 4 pages, 5 figures, powder and grains 2017 conference

Focus on Imaging Methods in Granular Physics

Authors: Axelle Amon, Philip Born, Karen E. Daniels, Joshua A. Dijksman, Kai Huang, David Parker, Matthias Schröter, Ralf Stannarius, Andreas Wierschem

Abstract: Granular materials are complex multi-particle ensembles in which macroscopic properties are largely determined by inter-particle interactions between their numerous constituents. In order to understand and to predict their macroscopic physical behavior, it is necessary to analyze the composition and interactions at the level of individual contacts and grains. To do so requires the ability to image… ▽ More Granular materials are complex multi-particle ensembles in which macroscopic properties are largely determined by inter-particle interactions between their numerous constituents. In order to understand and to predict their macroscopic physical behavior, it is necessary to analyze the composition and interactions at the level of individual contacts and grains. To do so requires the ability to image individual particles and their local configurations to high precision. A variety of competing and complementary imaging techniques have been developed for that task. In this introductory paper accompanying the Focus Issue, we provide an overview of these imaging methods and discuss their advantages and drawbacks, as well as their limits of application. △ Less

Submitted 7 April, 2017; v1 submitted 7 March, 2017; originally announced March 2017.

Comments: Submitted to Review of Scientific Instruments as introduction for: Focus on Imaging Methods in Granular Physics

Journal ref: Review Of Scientific Instruments 88, 051701 (2017)

Topological and geometric measurements of force chain structure

Authors: Chad Giusti, Lia Papadopoulos, Eli T. Owens, Karen E. Daniels, Danielle S. Bassett

Abstract: Developing quantitative methods for characterizing structural properties of force chains in densely packed granular media is an important step toward understanding or predicting large-scale physical properties of a packing. A promising framework in which to develop such methods is network science, which can be used to translate particle locations and force contacts to a graph in which particles ar… ▽ More Developing quantitative methods for characterizing structural properties of force chains in densely packed granular media is an important step toward understanding or predicting large-scale physical properties of a packing. A promising framework in which to develop such methods is network science, which can be used to translate particle locations and force contacts to a graph in which particles are represented by nodes and forces between particles are represented by weighted edges. Applying network-based community-detection techniques to extract force chains opens the door to developing statistics of force chain structure, with the goal of identifying shape differences across packings, and providing a foundation on which to build predictions of bulk material properties from mesoscale network features. Here, we discuss a trio of related but fundamentally distinct measurements of mesoscale structure of force chains in arbitrary 2D packings, including a novel statistic derived using tools from algebraic topology, which together provide a tool set for the analysis of force chain architecture. We demonstrate the utility of this tool set by detecting variations in force chain architecture with pressure. Collectively, these techniques can be generalized to 3D packings, and to the assessment of continuous deformations of packings under stress or strain. △ Less

Submitted 10 May, 2016; originally announced May 2016.

Comments: 13 pages, 5 figures

Journal ref: Phys. Rev. E 94, 032909 (2016)

Simulating Surfactant Spreading: Impact of a Physically Motivated Equation of State

Authors: Dina Sinclair, Rachel Levy, Karen E. Daniels

Abstract: For more than two decades, a single model for the spreading of a surfactant-driven thin liquid film has dominated the applied mathematics literature on the subject. Recently, through the use of fluorescently-tagged lipids, it has become possible to make direct, quantitative comparisons between experiments and models. These comparisons have revealed two important discrepancies between simulations a… ▽ More For more than two decades, a single model for the spreading of a surfactant-driven thin liquid film has dominated the applied mathematics literature on the subject. Recently, through the use of fluorescently-tagged lipids, it has become possible to make direct, quantitative comparisons between experiments and models. These comparisons have revealed two important discrepancies between simulations and experiments: the spatial distribution of the surfactant layer, and the timescale over which spreading occurs. In this paper, we present numerical simulations that demonstrate the impact of the particular choice of the equation of state (EoS) relating the surfactant concentration to the surface tension. Previous choices of the model EoS have been an ad-hoc decreasing function. Here, we instead propose an empirically-motivated equation of state; this provides a route to resolving some discrepancies and raises new issues to be pursued in future experiments. In addition, we test the influence of the choice of initial conditions and values for the non-dimensional groups. We demonstrate that the choice of EoS improves the agreement in surfactant distribution morphology between simulations and experiments, and impacts the dynamics of the simulations. The relevant feature of the EoS, the gradient, has distinct regions for empirically motivated choices, which suggests that future work will need to consider more than one timescale. We observe that the non-dimensional number controlling the relative importance of gravitational vs. capillary forces has a larger impact on the dynamics than the other non-dimensional groups. Finally, we observe that the experimental approach of using a ring to contain the surfactant could affect the surfactant and fluid dynamics if it disrupts the intended initial surfactant distribution. However, the meniscus itself does not significantly affect the dynamics. △ Less

Submitted 16 February, 2016; originally announced February 2016.

Comments: 21 pages, 12 figures

MSC Class: 35Q35; 76A20; 76M12; 76B45

Solid Capillarity: When and How does Surface Tension Deform Soft Solids?

Authors: Bruno Andreotti, Oliver Baeumchen, Francois Boulogne, Karen E. Daniels, Eric R. Dufresne, Hugo Perrin, Thomas Salez, Jacco H. Snoeijer, Robert W. Style

Abstract: Soft solids differ from stiff solids in an important way: their surface stresses can drive large deformations. Based on a topical workshop held in the Lorentz Center in Leiden, this Opinion highlights some recent advances in the growing field of solid capillarity and poses key questions for its advancement. Soft solids differ from stiff solids in an important way: their surface stresses can drive large deformations. Based on a topical workshop held in the Lorentz Center in Leiden, this Opinion highlights some recent advances in the growing field of solid capillarity and poses key questions for its advancement. △ Less

Submitted 29 December, 2015; originally announced December 2015.

Comments: 5 pages, 1 figure

Journal ref: Soft Matter, 12 2993 (2016) [Opinion]

High refractive index immersion liquid for super-resolution 3D imaging using sapphire-based aNAIL optics

Authors: Junaid M. Laskar, P. Shravan Kumar, Stephan Herminghaus, Karen E. Daniels, Matthias Schröter

Abstract: Optically-transparent immersion liquids with refractive index (n ~ 1.77) to match sapphire-based aplanatic numerical aperture increasing lens (aNAIL) are necessary for achieving deep 3D imaging with high spatial resolution. We report that antimony tribromide (SbBr$_{3}$) salt dissolved in liquid diiodomethane (CH$_{2}$I$_{2}$) provides a new high refractive index immersion liquid for optics applic… ▽ More Optically-transparent immersion liquids with refractive index (n ~ 1.77) to match sapphire-based aplanatic numerical aperture increasing lens (aNAIL) are necessary for achieving deep 3D imaging with high spatial resolution. We report that antimony tribromide (SbBr$_{3}$) salt dissolved in liquid diiodomethane (CH$_{2}$I$_{2}$) provides a new high refractive index immersion liquid for optics applications. The refractive index is tunable from n = 1.74 (pure) to n = 1.873 (saturated), by adjusting either salt concentration or temperature; this allows it to match (or even exceed) the refractive index of sapphire. Importantly, the solution gives excellent light transmittance in the ultraviolet to near-infrared range, an improvement over commercially-available immersion liquids. This refractive index matched immersion liquid formulation has enabled us to develop a sapphire-based aNAIL objective that has both high numerical aperture (NA = 1.17) and long working distance (WD = 12 mm). This opens up new possibilities for deep 3D imaging with high spatial resolution. △ Less

Submitted 20 April, 2016; v1 submitted 27 December, 2015; originally announced December 2015.

Journal ref: Applied Optics Vol. 55, pp. 3165-3169 (2016)

Stretching Rubber, Stretching Minds: a polymer physics lab for teaching entropy

Authors: Theodore A. Brzinski, Karen E. Daniels

Abstract: Entropy is a difficult concept to teach using real-world examples. Unlike temperature, pressure, volume, or work, it's not a quantity which most students encounter in their day-to-day lives. Even the way entropy is often qualitatively described, as a measure of disorder, is incomplete and can be misleading. In an effort to address these obstacles, we have developed a simple laboratory activity, th… ▽ More Entropy is a difficult concept to teach using real-world examples. Unlike temperature, pressure, volume, or work, it's not a quantity which most students encounter in their day-to-day lives. Even the way entropy is often qualitatively described, as a measure of disorder, is incomplete and can be misleading. In an effort to address these obstacles, we have developed a simple laboratory activity, the stretching of an elastic rubber sheet, intended to give students hands-on experience with the concepts of entropy, temperature and work in both adiabatic and quasistatic processes. We present two versions of the apparatus: a double-lever system, which may be reproduced with relatively little cost, and a commercial materials testing system, which provides students experience with scientific instrumentation that is used in research. △ Less

Submitted 3 August, 2015; originally announced August 2015.

Comments: Submitted to the American Journal of Physics

Spatio-temporal Patterns in Inclined Layer Convection

Authors: Priya Subramanian, Oliver Brausch, Karen E. Daniels, Eberhard Bodenschatz, Tobias M. Schneider, Werner Pesch

Abstract: This paper reports on a theoretical analysis of the rich variety of spatio-temporal patterns observed recently in inclined layer convection at medium Prandtl number when varying the inclination angle $γ$ and the Rayleigh number $R$. The present numerical investigation of the inclined layer convection system is based on the standard Oberbeck-Boussinesq equations. The patterns are shown to originate… ▽ More This paper reports on a theoretical analysis of the rich variety of spatio-temporal patterns observed recently in inclined layer convection at medium Prandtl number when varying the inclination angle $γ$ and the Rayleigh number $R$. The present numerical investigation of the inclined layer convection system is based on the standard Oberbeck-Boussinesq equations. The patterns are shown to originate from a complicated competition of buoyancy-driven and shear-flow driven pattern forming mechanisms. The former are expressed as \rm{longitudinal} convection rolls with their axes oriented parallel to the incline, the latter as perpendicular \rm{transverse} rolls. Along with conventional methods to study roll patterns and their stability, we employ direct numerical simulations in large spatial domains, comparable with the experimental ones. As a result, we determine the phase diagram of the characteristic complex 3D convection patterns above onset of convection in the $γ-R$ plane, and find that it compares very well with the experiments. In particular we demonstrate that interactions of specific Fourier modes, characterized by a resonant interaction of their wavevectors in the layer plane, are key to understanding the pattern morphologies. △ Less

Submitted 26 January, 2016; v1 submitted 7 July, 2015; originally announced July 2015.

Comments: 26 pages, 20 figures, 1 table. Changes in this version: extensive restructuring according to reviewer comments and modification to order of authors

Spatiotemporal measurement of surfactant distribution on gravity-capillary waves

Authors: Stephen L Strickland, Michael Shearer, Karen E Daniels

Abstract: Materials adsorbed to the surface of a fluid -- for instance, crude oil, biogenic slicks, or industrial/medical surfactants -- will move in response to surface waves. Due to the difficulty of non-invasive measurement of the spatial distribution of a molecular monolayer, little is known about the dynamics that couple the surface waves and the evolving density field. Here, we report measurements of… ▽ More Materials adsorbed to the surface of a fluid -- for instance, crude oil, biogenic slicks, or industrial/medical surfactants -- will move in response to surface waves. Due to the difficulty of non-invasive measurement of the spatial distribution of a molecular monolayer, little is known about the dynamics that couple the surface waves and the evolving density field. Here, we report measurements of the spatiotemporal dynamics of the density field of an insoluble surfactant driven by gravity-capillary waves in a shallow cylindrical container. Standing Faraday waves and traveling waves generated by the meniscus are superimposed to create a non-trivial surfactant density field. We measure both the height field of the surface using moiré-imaging, and the density field of the surfactant via the fluorescence of NBD-tagged phosphatidylcholine, a lipid. Through phase-averaging stroboscopically-acquired images of the density field, we determine that the surfactant accumulates on the leading edge of the traveling meniscus waves and in the troughs of the standing Faraday waves. We fit the spatiotemporal variations in the two fields using an ansatz consisting of a superposition of Bessel functions, and report measurements of the wavenumbers and energy damping factors associated with the meniscus and Faraday waves, as well as the spatial and temporal phase shifts between them. While these measurements are largely consistent for both types of waves and both fields, it is notable that the damping factors for height and surfactant in the meniscus waves do not agree, suggesting the presence of longitudinal waves. △ Less

Submitted 11 February, 2015; originally announced February 2015.

Extraction of Force-Chain Network Architecture in Granular Materials Using Community Detection

Authors: Danielle S. Bassett, Eli T. Owens, Mason A. Porter, M. Lisa Manning, Karen E. Daniels

Abstract: Force chains form heterogeneous physical structures that can constrain the mechanical stability and acoustic transmission of granular media. However, despite their relevance for predicting bulk properties of materials, there is no agreement on a quantitative description of force chains. Consequently, it is difficult to compare the force-chain structures in different materials or experimental condi… ▽ More Force chains form heterogeneous physical structures that can constrain the mechanical stability and acoustic transmission of granular media. However, despite their relevance for predicting bulk properties of materials, there is no agreement on a quantitative description of force chains. Consequently, it is difficult to compare the force-chain structures in different materials or experimental conditions. To address this challenge, we treat granular materials as spatially-embedded networks in which the nodes (particles) are connected by weighted edges that represent contact forces. We use techniques from community detection, which is a type of clustering, to find sets of closely connected particles. By using a geographical null model that is constrained by the particles' contact network, we extract chain-like structures that are reminiscent of force chains. We propose three diagnostics to measure these chain-like structures, and we demonstrate the utility of these diagnostics for identifying and characterizing classes of force-chain network architectures in various materials. To illustrate our methods, we describe how force-chain architecture depends on pressure for two very different types of packings: (1) ones derived from laboratory experiments and (2) ones derived from idealized, numerically-generated frictionless packings. By resolving individual force chains, we quantify statistical properties of force-chain shape and strength, which are potentially crucial diagnostics of bulk properties (including material stability). These methods facilitate quantitative comparisons between different particulate systems, regardless of whether they are measured experimentally or numerically. △ Less

Submitted 23 April, 2015; v1 submitted 17 August, 2014; originally announced August 2014.

Comments: 15 pages, 13 figures, and 2 appendices

Journal ref: Soft Matter, 2015, 11(14):2731-44

Capillary fracture of soft gels

Authors: Joshua B. Bostwick, Karen E. Daniels

Abstract: A liquid droplet resting on a soft gel substrate can deform that substrate to the point of material failure, whereby fractures develop on the gel surface that propagate outwards from the contact-line in a starburst pattern. In this paper, we characterize i) the initiation process in which the number of arms in the starburst is controlled by the ratio of surface tension contrast to the gel's elasti… ▽ More A liquid droplet resting on a soft gel substrate can deform that substrate to the point of material failure, whereby fractures develop on the gel surface that propagate outwards from the contact-line in a starburst pattern. In this paper, we characterize i) the initiation process in which the number of arms in the starburst is controlled by the ratio of surface tension contrast to the gel's elastic modulus and ii) the propagation dynamics showing that once fractures are initiated they propagate with a universal power law $L\propto t^{3/4}$. We develop a model for crack initiation by treating the gel as a linear elastic solid and computing the deformations within the substrate from the liquid/solid wetting forces. The elastic solution shows that both the location and magnitude of the wetting forces are critical in providing a quantitative prediction for the number of fractures and, hence, an interpretation of the initiation of capillary fractures. This solution also reveals that the depth of the gel is an important factor in the fracture process, as it can help mitigate large surface tractions; this finding is confirmed with experiments. We then develop a model for crack propagation by considering the transport of an inviscid fluid into the fracture tip of an incompressible material, and find that a simple energy-conservation argument can explain the observed material-independent power law. We compare predictions for both linear elastic and neo-Hookean solids finding that the latter better explains the observed exponent. △ Less

Submitted 15 October, 2013; originally announced October 2013.

Self-healing Dynamics of Surfactant Coatings on Thin Viscous Films

Authors: Stephen L. Strickland, Matthew Hin, M. Richard Sayanagi, Cameron Conti, Karen E. Daniels, Rachel Levy

Abstract: We investigate the dynamics of an insoluble surfactant on the surface of a thin viscous fluid spreading inward to fill a surfactant-free region. During the initial stages of surfactant self-healing, Marangoni forces drive an axisymmetric ridge inward to coalesce into a growing central distension; this is unlike outward-spreading, in which the ridge decays. In later dynamics, the distension slowly… ▽ More We investigate the dynamics of an insoluble surfactant on the surface of a thin viscous fluid spreading inward to fill a surfactant-free region. During the initial stages of surfactant self-healing, Marangoni forces drive an axisymmetric ridge inward to coalesce into a growing central distension; this is unlike outward-spreading, in which the ridge decays. In later dynamics, the distension slowly decays and the surfactant concentration equilibrates. We present results from experiments in which we simultaneously measure the surfactant concentration (using fluorescently-tagged lipids) and the fluid height profile (via laser profilometry). We compare the results to simulations of a mathematical model using parameters from our experiments. For surfactant concentrations close to but below the critical monolayer concentration, we observe agreement between the height profiles in the numerical simulations and the experiment, but disagreement in the surfactant distribution. In experiments at lower concentrations, the surfactant spreading and formation of a Marangoni ridge are no longer present, and a persistent lipid-free region remains. This observation, which is not captured by the simulations, has undesirable implications for applications where uniform coverage is advantageous. Finally, we probe the generality of the effect, and find that distensions of similar size are produced independent of initial fluid thickness, size of initial clean region, and surfactant type. △ Less

Submitted 11 February, 2014; v1 submitted 13 September, 2013; originally announced September 2013.

Comments: Arguments concerning the timescale in section 2 have been revised. Results unchanged

Surfactant Spreading on a Thin Liquid Film: Reconciling Models and Experiments

Authors: Ellen R. Swanson, Stephen L. Strickland, Michael Shearer, Karen E. Daniels

Abstract: The spreading dynamics of surfactant molecules on a thin fluid layer is of both fundamental and practical interest. A mathematical model formulated by Gaver and Grotberg 1990 describing the spreading of a single layer of insoluble surfactant has become widely accepted, and several experiments on axisymmetric spreading have confirmed its predictions for both the height profile of the free surface a… ▽ More The spreading dynamics of surfactant molecules on a thin fluid layer is of both fundamental and practical interest. A mathematical model formulated by Gaver and Grotberg 1990 describing the spreading of a single layer of insoluble surfactant has become widely accepted, and several experiments on axisymmetric spreading have confirmed its predictions for both the height profile of the free surface and the spreading exponent (the radius of the circular area covered by surfactant grows as t^{1/4}). However, these prior experiments have primarily utilized surfactant quantities exceeding (sometimes far exceeding) a monolayer. In this paper, we report that this regime is characterized by a mismatch between the timescales of the experiment and model, and additionally find that the spatial distribution of surfactant molecules differs substantially from the model prediction. For experiments performed in the monolayer regime for which the model was developed, the surfactant layer is observed to have a spreading exponent of less than 1/10, far below the predicted value, and the surfactant distribution is also in disagreement. These findings suggest that the model is inadequate for describing the spreading of insoluble surfactants on thin fluid layers. △ Less

Submitted 20 June, 2013; originally announced June 2013.

Comments: 11 figures

The Influence of Network Topology on Sound Propagation in Granular Materials

Authors: Danielle S. Bassett, Eli T. Owens, Karen E. Daniels, Mason A. Porter

Abstract: Granular materials, whose features range from the particle scale to the force-chain scale to the bulk scale, are usually modeled as either particulate or continuum materials. In contrast with either of these approaches, network representations are natural for the simultaneous examination of microscopic, mesoscopic, and macroscopic features. In this paper, we treat granular materials as spatially-e… ▽ More Granular materials, whose features range from the particle scale to the force-chain scale to the bulk scale, are usually modeled as either particulate or continuum materials. In contrast with either of these approaches, network representations are natural for the simultaneous examination of microscopic, mesoscopic, and macroscopic features. In this paper, we treat granular materials as spatially-embedded networks in which the nodes (particles) are connected by weighted edges obtained from contact forces. We test a variety of network measures for their utility in helping to describe sound propagation in granular networks and find that network diagnostics can be used to probe particle-, curve-, domain-, and system-scale structures in granular media. In particular, diagnostics of meso-scale network structure are reproducible across experiments, are correlated with sound propagation in this medium, and can be used to identify potentially interesting size scales. We also demonstrate that the sensitivity of network diagnostics depends on the phase of sound propagation. In the injection phase, the signal propagates systemically, as indicated by correlations with the network diagnostic of global efficiency. In the scattering phase, however, the signal is better predicted by meso-scale community structure, suggesting that the acoustic signal scatters over local geographic neighborhoods. Collectively, our results demonstrate how the force network of a granular system is imprinted on transmitted waves. △ Less

Submitted 4 July, 2012; v1 submitted 9 October, 2011; originally announced October 2011.

Comments: 19 pages, 9 figures, and 3 tables

Graphene to Graphane: Novel Electrochemical Conversion

Authors: Kevin M. Daniels, B. Daas, R. Zhang, I. Chowdhury, A. Obe, J. Weidner, C. Williams, T. S. Sudarshan, MVS Chandrashekhar

Abstract: A novel electrochemical means to generate atomic hydrogen, simplifying the synthesis and controllability of graphane formation on graphene is presented. High quality, vacuum grown epitaxial graphene (EG) was used as starting material for graphane conversion. A home-built electrochemical cell with Pt wire and exposed graphene as the anode and cathode, respectively, was used to attract H+ ions to re… ▽ More A novel electrochemical means to generate atomic hydrogen, simplifying the synthesis and controllability of graphane formation on graphene is presented. High quality, vacuum grown epitaxial graphene (EG) was used as starting material for graphane conversion. A home-built electrochemical cell with Pt wire and exposed graphene as the anode and cathode, respectively, was used to attract H+ ions to react with the exposed graphene. Cyclic voltammetry of the cell revealed the potential of the conversion reaction as well as oxidation and reduction peaks, suggesting the possibility of electrochemically reversible hydrogenation. A sharp increase in D peak in the Raman spectra of EG, increase of D/G ratio, introduction of a peak at ~2930 cm-1 and respective peak shifts as well as a sharp increase in resistance showed the successful hydrogenation of EG. This conversion was distinguished from lattice damage by thermal reversal back to graphene at 1000°C. △ Less

Submitted 26 October, 2010; originally announced October 2010.

Comments: 18 pages, 8 figures, 1 table, revised version submitted to the Journal of Electronic Materials

Polariton Enhanced IR Reflection Spectra of Epitaxial Graphene on SiC

Authors: B. K. Daas, K. M. Daniels, T. S. Sudarshan, M. V. S. Chandrashekhar

Abstract: We show ~10x polariton-enhanced infrared reflectivity of epitaxial graphene on 4H-SiC, in SiC's restrahlen band (8-10um). By fitting measurements to theory, we extract the thickness, N, in monolayers (ML), momentum scattering time, Fermi level position of graphene and estimate carrier mobility. By showing that 1/root(ns), the carrier concentration/ML, we argue that scattering is dominated by short… ▽ More We show ~10x polariton-enhanced infrared reflectivity of epitaxial graphene on 4H-SiC, in SiC's restrahlen band (8-10um). By fitting measurements to theory, we extract the thickness, N, in monolayers (ML), momentum scattering time, Fermi level position of graphene and estimate carrier mobility. By showing that 1/root(ns), the carrier concentration/ML, we argue that scattering is dominated by short-range interactions at the SiC/graphene interface. Polariton formation finds application in near-field optical devices such as superlenses. △ Less

Submitted 27 October, 2010; v1 submitted 19 October, 2010; originally announced October 2010.

Comments: 11 pages and 10 figures. Submitted to Nano-Letters