Showing 1–40 of 40 results for author: Dhar, P

Droplet impact and splitting behaviour on superhydrophobic wedges

Authors: Gudlavalleti V V S Vara Prasad, Parmod Kumar, Purbarun Dhar, Devranjan Samanta

Abstract: We report an extensive computational and experimental investigation of droplet impact and subsequent splitting hydrodynamics on superhydrophobic wedges. 2D and necessary 3D simulations using the volume of fluid method, backed with experimentations, have been performed to predict the droplet impact, spreading, split up, retraction against sliding, and daughter droplet lift off events from the SH we… ▽ More We report an extensive computational and experimental investigation of droplet impact and subsequent splitting hydrodynamics on superhydrophobic wedges. 2D and necessary 3D simulations using the volume of fluid method, backed with experimentations, have been performed to predict the droplet impact, spreading, split up, retraction against sliding, and daughter droplet lift off events from the SH wedge. In particular, we examine how the wedge angle , wedge asymmetry , Weber number and normalized Bond number influence the post-impact dynamics. We observe that for symmetric wedges, the maximum spread factor of the droplet decreases with an increase in wedge angle at a fixed We. At high wedge angles, the sharp steepness of the wedge causes less contact area for the droplet to spread. For the asymmetric wedges, it has been noted that beta max increases with an increase in the We due to the higher inertial forces of the droplet against sliding. Furthermore, the increases with an increase in Bo at a fixed We due to the dominance of the gravitational force over the capillary force of the droplet. It has been also found that at the same Bo, the increases with an increase in We due to the dominance of inertial forces over the capillary forces. The split volume of daughter droplets during the split up stage for different symmetric and asymmetric wedge angles has been discussed. In general, our 2D simulations agree well with the experiments for a major part of the droplet lifetime. Further, we have conducted a detailed 3D simulation based energy budget analysis to estimate the temporal evolution of the various energy components at different post impact hydrodynamic regimes. △ Less

Submitted 18 July, 2024; originally announced July 2024.

Offset coalescence behaviour of impacting low-surface tension droplet on high-surface-tension droplet

Authors: Pragyan Kumar Sarma, Purbarun Dhar, Anup Paul

Abstract: Impact of droplets of varying surface tension and subsequent spreading over a solid surface are inherent features in printing applications. In this regard, an experimental study of impact of two drops of varied surface tension is carried out where the sessile water droplet on a hydrophilic substrate is impacted upon by another droplet of sequentially lowered surface tension. The impacts are studie… ▽ More Impact of droplets of varying surface tension and subsequent spreading over a solid surface are inherent features in printing applications. In this regard, an experimental study of impact of two drops of varied surface tension is carried out where the sessile water droplet on a hydrophilic substrate is impacted upon by another droplet of sequentially lowered surface tension. The impacts are studied for different impact velocities and offsets with respect to the mid-plane of the two colliding droplets. Sodium Dodecyl Sulfate (SDS) is used to alter the surface tension without altering the viscosity, to study the various parameters affecting the spreading length viz. the surface tension, offset between the drops, and impact velocity. The spreading lengths are obtained through image processing of the captured footage of the impact dynamics by a high-speed camera. It is found out that upon lowering the surface tension, the maximum and equilibrium spreading length varies to a significant extent also the nature of the spreading dynamics changes. Both side and top-view imaging are performed to understand the overall hydrodynamics. There is also a substantial change in drawback when dissimilarity is surface tension between the impacting droplets exist. Finally, a fit model is obtained to predict the maximum spread length of the various cases. △ Less

Submitted 3 October, 2023; originally announced October 2023.

Comments: 38

Deformation transients of confined droplets within interacting electric and magnetic field environment

Authors: Pulak Gupta, Purbarun Dhar, Devranjan Samanta

Abstract: A theoretical exploration and an analytical model for the electro-magneto-hydrodynamics (EMHD) of leaky dielectric liquid droplets, suspended in an immiscible confined fluid domain has been presented. The analytical solution for the system, under small deformation approximation, in creeping flow regime, has been put forward. Study of the droplet deformation suggests that its temporal evolution is… ▽ More A theoretical exploration and an analytical model for the electro-magneto-hydrodynamics (EMHD) of leaky dielectric liquid droplets, suspended in an immiscible confined fluid domain has been presented. The analytical solution for the system, under small deformation approximation, in creeping flow regime, has been put forward. Study of the droplet deformation suggests that its temporal evolution is exponential, and dependents on the electric and magnetic field interaction. Further, the direction of the applied magnetic field with respect to the electric field decides whether the contribution of magnetic forces opposes or aids the interfacial net electrical force due to the electric field. Validation of the proposed model at the asymptotic limits of vanishing magnetic field show that the model accurately reduces to the case of transient electrohydrodynamic model. We also propose a magnetic discriminating function to quantify the steady-state droplet deformation in the presence of interacting electric and magnetic fields. The change of droplets from spherical shape to prolate, and oblate spheroids, correspond to magnetic discriminating function >0 and <0 regimes, respectively. It is shown that with the aid of low magnitude magnetic field, a substantial augmentation in the deformation parameter, and the associated EMHD circulation within and around the droplet is achieved. The analysis also reveals the deformation lag and specific critical parameters that aid or suppressed this lag behaviour; discussed in terms of relevant non-dimensional parameters. △ Less

Submitted 2 May, 2023; v1 submitted 22 December, 2022; originally announced December 2022.

Comments: 61 pages

Delay of Leidenfrost point during drop impact of surfactant solutions

Authors: Gudlavalleti V V S Vara Prasad, Purbarun Dhar, Devranjan Samanta

Abstract: In this article, a novel method of increasing the dynamic Leidenfrost temperature is proposed through the addition of both anionic (SDS) and cationic (CTAB) surfactants to water droplets. We focus on understanding the hydrodynamics and thermal aspects of droplet impact Leidenfrost behaviour of surfactant solutions, and aim to delay the onset of the Leidenfrost regime. The effects of Weber number (… ▽ More In this article, a novel method of increasing the dynamic Leidenfrost temperature is proposed through the addition of both anionic (SDS) and cationic (CTAB) surfactants to water droplets. We focus on understanding the hydrodynamics and thermal aspects of droplet impact Leidenfrost behaviour of surfactant solutions, and aim to delay the onset of the Leidenfrost regime. The effects of Weber number (We), Ohnesorge number (Oh) and surfactant concentration on dynamic Leidenfrost temperature were experimentally studied in details, covering a wide gamut of governing parameters. At a fixed impact velocity, increased with the increase of surfactant concentration. decreased with increase of impact velocity for all solutions of surfactant droplets at a fixed surfactant concentration. We proposed a scaling relationship for in terms of We and Oh. At temperatures (~ 400oC) considerably higher than , droplets exhibit trampoline like dynamics or central jet formation, associated with fragmentation, depending upon the impact velocity. Finally, a regime map of the different boiling regimes such as transition boiling, Leidenfrost effect, trampolining and explosive behaviour is presented as function of impact We and substrate temperature (Ts). The findings may hold strong implications in thermal management systems operating at high temperatures △ Less

Submitted 7 October, 2021; originally announced October 2021.

Magnetoelastic effect in impact dynamics of nonNewtonian ferrofluid droplets

Authors: Gudlavalleti V V S Vara Prasad, Purbarun Dhar, Devranjan Samanta

Abstract: In this article, we propose, with the aid of detailed experiments and scaling analysis, the existence of magneto-elastic effects in the impact hydrodynamics of non-Newtonian ferrofluid droplets on superhydrophobic (SH) surfaces in presence of a magnetic field. The effects of magnetic Bond number (Bom), Weber number (We), polymer concentration and magnetic nanoparticle (Fe3O4) concentration in the… ▽ More In this article, we propose, with the aid of detailed experiments and scaling analysis, the existence of magneto-elastic effects in the impact hydrodynamics of non-Newtonian ferrofluid droplets on superhydrophobic (SH) surfaces in presence of a magnetic field. The effects of magnetic Bond number (Bom), Weber number (We), polymer concentration and magnetic nanoparticle (Fe3O4) concentration in the ferrofluids were investigated. In comparison to Newtonian ferrofluid droplets, addition of polymers caused rebound suppression of the droplets relatively at lower Bom for a fixed magnetic nanoparticle concentration and We. We further observed that for a fixed polymer concentration and We, increasing magnetic nanoparticle concentration also triggers earlier rebound suppression with increasing Bom. In the absence of the magnetic nanoparticles, the non-Newtonian droplets do not show rebound suppression for the range of Bom investigated. Likewise, the Newtonian ferrofluids show rebound suppression at large Bom. This intriguing interplay of elastic effects of polymer chains and the magnetic nanoparticles, dubbed as the magneto-elastic effect is noted to lead to the rebound suppression. We establish a scaling relationship to show that the rebound suppression is observed as manifestation of onset of magneto-elastic instability only when the proposed magnetic Weissenberg number (Wim) exceeds unity. We also put forward a phase map to identify the various regimes of impact ferrohydrodynamics of such droplets, and the occurrence of the magneto-elastic effect. △ Less

Submitted 18 November, 2020; originally announced November 2020.

Comments: 22 pages

Thermal Response of Dielectric Nanoparticle Infused Tissue Phantoms during Microwave Assisted Hyperthermia

Authors: Dhiraj Kumar, Purbarun Dhar, Anup Paul

Abstract: Hyperthermia has been in use for many years; as a potential alternative modality for cancer treatment. In this paper, an experimental investigation of microwave assisted thermal heating (MWATH) of tissue phantom using a domestic microwave oven has been reported. Computer simulations using finite element method based tools was also carried out to support the experimental observations and probe insi… ▽ More Hyperthermia has been in use for many years; as a potential alternative modality for cancer treatment. In this paper, an experimental investigation of microwave assisted thermal heating (MWATH) of tissue phantom using a domestic microwave oven has been reported. Computer simulations using finite element method based tools was also carried out to support the experimental observations and probe insight on the thermal transport aspects deep within the tissue phantom. A good agreement between predicted and measured temperature were achieved. Furthermore, experiments were conducted to investigate the efficacy of dielectric nanoparticles viz. alumina (Al2O3) and titanium oxide (TiO2) during the MWATH of nanoparticle infused tumor phantoms. A deep seated tumor injected with nanoparticle solution was specifically mimicked in the experiments. Interesting results were obtained in terms of spatiotemporal thermal history of the nanoparticle infused tissue phantoms. An elevation in the temperature distribution was achieved in the vicinity of the targeted zone due to the presence of nanoparticles, and the spatial distribution of temperature was grossly morphed. We conclusively show, using experiments and simulations that unlike other nanoparticle mediated hyperthermia techniques, direct injection of the nanoparticles within the tumor leads to enhanced heat generation in the neighb oring healthy tissues. The inhomogeneity of the hyperthermia event is evident from the lo cal occurrence of hot spots and cold spots respectively. The present findings may have far reaching implications as a framework in predicting temperature distributions during MWA. △ Less

Submitted 24 June, 2020; originally announced June 2020.

Comments: International Journal, 10 figures, 2 tables

Electrohydrodynamics of dielectric droplet collision with variant wettability surfaces

Authors: Nilamani Sahoo, Devranjan Samanta, Purbarun Dhar

Abstract: In this article, we report experimental and semi analytical findings to elucidate the electrohydrodynamics EHD of a dielectric liquid droplet impact on superhydrophobic SH and hydrophilic surfaces. A wide range of Weber numbers We and electro-capillary numbers Cae is covered to explore the various regimes of droplet impact EHD. We show that for a fixed We 60, droplet rebound on SH surface is suppr… ▽ More In this article, we report experimental and semi analytical findings to elucidate the electrohydrodynamics EHD of a dielectric liquid droplet impact on superhydrophobic SH and hydrophilic surfaces. A wide range of Weber numbers We and electro-capillary numbers Cae is covered to explore the various regimes of droplet impact EHD. We show that for a fixed We 60, droplet rebound on SH surface is suppressed with increase of electric field intensity. At high Cae, instead of the usual uniform radial contraction, the droplets retract faster in orthogonal direction to the electric field and spread along the direction of the electric field. This prevents the accumulation of sufficient kinetic energy to achieve the droplet rebound phenomena. For certain values of We and Ohnesorge number Oh, droplets exhibit somersault like motion during rebound. Subsequently we propose a semi analytical model to explain the field induced rebound phenomenon on SH surfaces. Above a critical Cae 4.0, EHD instability causes fingering pattern via evolution of spire at the rim. Further, the spreading EHD on both hydrophilic and SH surfaces are discussed. On both wettability surfaces and for a fixed We, the spreading factor shows an increasing trend with increase in Cae. We have formulated an analytical model based on energy conservation to predict the maximum spreading diameter. The model predictions hold reasonably good agreement with the experimental observations. Finally, a phase map was developed to explain the post impact droplet dynamics on SH surfaces for a wide range of We and Cae. △ Less

Submitted 23 June, 2020; originally announced June 2020.

Advection kinetics induced self assembly of colloidal nanoflakes into microscale floral structures

Authors: Purbarun Dhar

Abstract: This article explores the governing role of the internal hydrodynamics and advective transport within sessile colloidal droplets on the self assembly of nanostructures to form floral patterns. Water acetone binary fluid and Bi2O3 nanoflakes based complex fluids are experimented with. Microliter sessile droplets are allowed to vaporize and the dry out patterns are examined using scanning electron m… ▽ More This article explores the governing role of the internal hydrodynamics and advective transport within sessile colloidal droplets on the self assembly of nanostructures to form floral patterns. Water acetone binary fluid and Bi2O3 nanoflakes based complex fluids are experimented with. Microliter sessile droplets are allowed to vaporize and the dry out patterns are examined using scanning electron microscopy. The presence of distributed self assembled rose like structures is observed. The population density, structure and shape of the floral structures are noted to be dependent on the binary fluid composition and nanomaterial concentration. Detailed microscopic particle image velocimetry analysis is undertaken to qualitatively and quantitatively describe the solutal Marangoni advection within the evaporating droplets. It has been shown that the kinetics, regime and location of the internal advection are responsible factors towards the hydrodynamics influenced clustering, aggregation and self-assembly of the nanoflakes. In addition, the size of the nanostructures and the complex fluids. △ Less

Submitted 1 June, 2020; originally announced June 2020.

Surface declination governed asymmetric sessile droplet evaporation

Authors: Purbarun Dhar, Raghavendra Kumar Dwivedi, A R Harikrishnan

Abstract: The article reports droplet evaporation kinetics on inclined substrates. Comprehensive experimental and theoretical analyses of the droplet evaporation behaviour for different substrate declination, wettability and temperatures have been presented. Sessile droplets with substrate declination exhibit distorted shape and evaporate at different rates compared to droplets on the same horizontal substr… ▽ More The article reports droplet evaporation kinetics on inclined substrates. Comprehensive experimental and theoretical analyses of the droplet evaporation behaviour for different substrate declination, wettability and temperatures have been presented. Sessile droplets with substrate declination exhibit distorted shape and evaporate at different rates compared to droplets on the same horizontal substrate and is characterized by more often changes in regimes of evaporation. The slip stick and jump stick modes are prominent during evaporation. For droplets on inclined substrates, the evaporative flux is also asymmetric and governed by the initial contact angle dissimilarity. Due to smaller contact angle at the rear contact line, it is the zone of a higher evaporative flux. Particle image velocimetry shows the increased internal circulation velocity within the inclined droplets. Asymmetry in the evaporative flux leads to higher temperature gradients, which ultimately enhances the thermal Marangoni circulation near the rear of the droplet where the evaporative flux is highest. A model is adopted to predict the thermal Marangoni advection velocity, and good match is obtained. The declination angle and imposed thermal conditions interplay and lead to morphed evaporation kinetics than droplets on horizontal heated surfaces. Even weak movements of the TL alter the evaporation dynamics significantly, by changing the shape of the droplet from ideally elliptical to almost spherical cap, which ultimately reduces the evaporative flux. The life time of the droplet is modelled by modifying available models for non-heated substrate, to account for the shape asymmetry. The present findings may find strong implications towards microscale thermo-hydrodynamics. △ Less

Submitted 1 June, 2020; originally announced June 2020.

Control and modulation of droplet vaporization rates via competing ferro- and electro-hydrodynamics

Authors: Purbarun Dhar, Vivek Jaiswal, Hanumant Chate, Lakshmi Sirisha Maganti

Abstract: Modification and control over the vaporization kinetics of microfluidic droplets may have strong utilitarian implications in several scientific and technological applications. The article reports the control over the vaporization kinetics of pendent droplets under the influence of competing internal electrohydrodynamic and ferrohydrodynamic advection. Experimental and theoretical studies are perfo… ▽ More Modification and control over the vaporization kinetics of microfluidic droplets may have strong utilitarian implications in several scientific and technological applications. The article reports the control over the vaporization kinetics of pendent droplets under the influence of competing internal electrohydrodynamic and ferrohydrodynamic advection. Experimental and theoretical studies are performed and the morphing of vaporization kinetics of electrically conducting and paramagnetic fluid droplets using orthogonal electric and magnetic stimuli is established. Analysis of the observations reveals that the electric field has a domineering influence compared to the magnetic field. While the magnetic field is noted to aid the vaporization rates, the electric field is observed to decelerate the same. Neither the vapour diffusion dominated kinetics nor the field induced modified surface tension can explain the observed vaporization behaviours. Velocimetry within the droplet shows largely modified internal ferro and electrohydrodynamic advection, which is noted to be the crux of the mechanism towards modified vaporization rates. A mathematical treatment is proposed and takes into account the roles played by the governing Hartmann, electrohydrodynamic, interaction, the thermal and solutal Marangoni, and the electro and magneto Prandtl and Schmidt numbers. It is observed that the morphing of the thermal and solutal Marangoni numbers by the electromagnetic interaction number plays the dominant role towards morphing the advection dynamics. The model is able to predict the internal advection velocities accurately. The findings may hold significant promise towards smart control and tuning of vaporization kinetics in microhydrodynamics transport paradigms. △ Less

Submitted 1 June, 2020; originally announced June 2020.

Suppressed Leidenfrost phenomenon during impact of elastic fluid droplets

Authors: Purbarun Dhar, Soumya Ranjan Mishra, Ajay Gairola, Devranjan Samanta

Abstract: The present article highlights the role of non-Newtonian (elastic) effects on the droplet impact phenomenology at temperatures considerably higher than the boiling point, especially at or above the Leidenfrost regime. The Leidenfrost point (LFP) was found to decrease with increase in the impact Weber number (based on velocity just before the impact) for fixed polymer (Polyacrylamide, PAAM) concent… ▽ More The present article highlights the role of non-Newtonian (elastic) effects on the droplet impact phenomenology at temperatures considerably higher than the boiling point, especially at or above the Leidenfrost regime. The Leidenfrost point (LFP) was found to decrease with increase in the impact Weber number (based on velocity just before the impact) for fixed polymer (Polyacrylamide, PAAM) concentrations. Water droplets fragmented at very low Weber numbers (~22), whereas the polymer droplets resisted fragmentation at much higher Weber numbers (~155). We also varied the polymer concentration and observed that till 1000 ppm, the LFP was higher compared to water. This signifies that the effect can be delayed by the use of elastic fluids. We have showed the possible role of elastic effects (manifested by the formation of long lasting filaments) during retraction in the improvement of the LFP. However for 1500 ppm, LFP was lower than water, but with similar residence time during initial impact. In addition, we studied the role of Weber number and viscoelastic effects on the rebound behaviour at 405o C. We observed that the critical Weber number till which the droplet resisted fragmentation at 405o C increased with the polymer concentration. In addition, for a fixed Weber number, the droplet rebound height and the hovering time period increased up to 500 ppm, and then decreased. Similarly, for fixed polymer concentrations like 1000 and 1500 ppm, the rebound height showed an increasing trend up to certain a certain Weber number and then decreased. This non-monotonic behaviour of rebound heights was attributed to the observed diversion of rebound kinetic energy to rotational energy during the hovering phase. △ Less

Submitted 12 May, 2020; originally announced May 2020.

Competing advection decelerates droplet evaporation on heated surfaces

Authors: Abhishek Kaushal, Vivek Jaiswal, Vishwajeet Mehandia, Purbarun Dhar

Abstract: In this article we report the atypical and anomalous evaporation kinetics of saline sessile droplets on surfaces with elevated temperatures. In a previous we showed that saline sessile droplets evaporate faster compared to water droplets when the substrates are not heated. In the present study we discover that in the case of heated surfaces, the saline droplets evaporate slower than the water coun… ▽ More In this article we report the atypical and anomalous evaporation kinetics of saline sessile droplets on surfaces with elevated temperatures. In a previous we showed that saline sessile droplets evaporate faster compared to water droplets when the substrates are not heated. In the present study we discover that in the case of heated surfaces, the saline droplets evaporate slower than the water counterpart, thereby posing a counter-intuitive phenomenon. The reduction in the evaporation rates is directly dependent on the salt concentration and the surface wettability. Natural convection around the droplet and thermal modulation of surface tension is found to be inadequate to explain the mechanisms. Flow visualisations using particle image velocimetry PIV reveals that the morphed advection within the saline droplets is a probable reason behind the arrested evaporation. Infrared thermography is employed to map the thermal state of the droplets. A thermosolutal Marangoni based scaling analysis is put forward. It is observed that the Marangoni and internal advection borne of thermal and solutal gradients are competitive, thereby leading to the overall decay of internal circulation velocity, which reduces the evaporation rates. The theoretically obtained advection velocities conform to the experimental results. This study sheds rich insight on a novel yet anomalous species transport behaviour in saline droplets. △ Less

Submitted 13 January, 2020; originally announced January 2020.

Hydrodynamics of magnetic fluid droplets on superhydrophobic surfaces

Authors: Nilamani Sahoo, Gargi Khurana, Devranjan Samanta, Purbarun Dhar

Abstract: The study reports the aspects of postimpact hydrodynamics of ferrofluid droplets on superhydrophobic SH surfaces in the presence of a horizontal magnetic field. A wide gamut of dynamics was observed by varying the impact Weber number We, the Hartmann number Ha and the magnetic field strength manifested through the magnetic Bond number Bom. For a fixed We 60, we observed that at moderately low Bom… ▽ More The study reports the aspects of postimpact hydrodynamics of ferrofluid droplets on superhydrophobic SH surfaces in the presence of a horizontal magnetic field. A wide gamut of dynamics was observed by varying the impact Weber number We, the Hartmann number Ha and the magnetic field strength manifested through the magnetic Bond number Bom. For a fixed We 60, we observed that at moderately low Bom 300, droplet rebound off the SH surface is suppressed. The noted We is chosen to observe various impact outcomes and to reveal the consequent ferrohydrodynamic mechanisms. We also show that ferrohydrodynamic interactions leads to asymmetric spreading, and the droplet spreads preferentially in a direction orthogonal to the magnetic field lines. We show analytically that during the retraction regime, the kinetic energy of the droplet is distributed unequally in the transverse and longitudinal directions due to the Lorentz force. This ultimately leads to suppression of droplet rebound. We study the role of Bom at fixed We 60, and observed that the liquid lamella becomes unstable at the onset of retraction phase, through nucleation of holes, their proliferation and rupture after reaching a critical thickness only on SH surfaces, but is absent on hydrophilic surfaces. We propose an analytical model to predict the onset of instability at a critical Bom. The analytical model shows that the critical Bom is a function of the impact We, and the critical Bom decreases with increasing We. We illustrate a phase map encompassing all the post impact ferrohydrodynamic phenomena on SH surfaces for a wide range of We and Bom. △ Less

Submitted 13 January, 2020; originally announced January 2020.

Evaporation kinetics of ferrofluid droplets in magnetic field ambience

Authors: Ankur Chattopadhyay, Raghvendra Kumar Dwivedi, A R Harikrishnan, Purbarun Dhar

Abstract: The present article discusses the physics and mechanics of evaporation of pendent, aqueous ferrofluid droplets and modulation of the same by external magnetic field. We show experimentally and by mathematical analysis that the presence of magnetic field improves the evaporation rates of ferrofluid droplets. First we tackle the question of improved evaporation of the colloidal droplets compared to… ▽ More The present article discusses the physics and mechanics of evaporation of pendent, aqueous ferrofluid droplets and modulation of the same by external magnetic field. We show experimentally and by mathematical analysis that the presence of magnetic field improves the evaporation rates of ferrofluid droplets. First we tackle the question of improved evaporation of the colloidal droplets compared to water, and propose physical mechanisms to explain the same. Experiments show that the changes in evaporation rates aided by the magnetic field cannot be explained on the basis of changes in surface tension, or based on classical diffusion driven evaporation models. Probing using particle image velocimetry shows that the internal advection kinetics of such droplets plays a direct role towards the augmented evaporation rates by modulating the associated Stefan flow. Infrared thermography reveal changes in the thermal gradients within the droplet and evaluating the dynamic surface tension reveals presence of solutal gradients within the droplet, both brought about by the external field. Based on the premise, a scaling analysis of the internal magnetothermal and magnetosolutal ferroadvection behavior is presented. The model incorporates the role of the governing Hartmann number, the magnetothermal Prandtl number and the magnetosolutal Schmidt number. The analysis and stability maps reveal that the magneto-solutal ferroadvection is the more dominant mechanism, and the model is able to predict the internal advection velocities with accuracy. Further, another scaling model to predict the modified Stefan flow is proposed, and is found to accurately predict the improved evaporation rates. △ Less

Submitted 25 November, 2019; originally announced November 2019.

Soluto-thermo-hydrodynamics influenced evaporation of sessile droplets

Authors: Abhishek Kaushal, Vivek Jaiswal, Vishwajeet Mehandia, Purbarun Dhar

Abstract: The present article experimentally and theoretically probes the evaporation kinetics of sessile saline droplets. Observations reveal that presence of solvated ions leads to modulated evaporation kinetics, which is further a function of surface wettability. On hydrophilic surfaces, increasing salt concentration leads to enhanced evaporation rates, whereas on superhydrophobic surfaces, it first enha… ▽ More The present article experimentally and theoretically probes the evaporation kinetics of sessile saline droplets. Observations reveal that presence of solvated ions leads to modulated evaporation kinetics, which is further a function of surface wettability. On hydrophilic surfaces, increasing salt concentration leads to enhanced evaporation rates, whereas on superhydrophobic surfaces, it first enhances and reduces with concentration. Also, the nature and extents of the evaporation regimes constant contact angle or constant contact radius are dependent on the salt concentration. The reduced evaporation on superhydrophobic surfaces has been explained based on observed via microscopy crystal nucleation behaviour within the droplet. Purely diffusion driven evaporation models are noted to be unable to predict the modulated evaporation rates. Further, the changes in the surface tension and static contact angles due to solvated salts also cannot explain the improved evaporation behaviour. Internal advection is observed using PIV to be generated within the droplet and is dependent on the salt concentration. The advection dynamics has been used to explain and quantify the improved evaporation behaviour by appealing to the concept of interfacial shear modified Stefan flows around the evaporating droplet. The analysis leads to accurate predictions of the evaporation rates. Further, another scaling analysis has been proposed to show that the thermal and solutal Marangoni advection within the system leads to the advection behaviour. The analysis also shows that the dominant mode is the solutal advection and the theory predicts the internal circulation velocities with good accuracy. The findings may be of importance to microfluidic thermal and species transport systems. △ Less

Submitted 25 November, 2019; originally announced November 2019.

Onset of rebound suppression in non Newtonian droplets post impact on superhydrophobic surfaces

Authors: Purbarun Dhar, Soumya Ranjan Mishra, Devranjan Samanta

Abstract: Droplet deposition after impact on superhydrophobic surfaces has been an important area of study in recent years due to its potential application in reduction of pesticides usage. Minute amounts of long chain polymers added to water has been known to arrest the droplet rebound effect on superhydrophobic surfaces. Previous studies have attributed different reasons like extensional viscosity, domina… ▽ More Droplet deposition after impact on superhydrophobic surfaces has been an important area of study in recent years due to its potential application in reduction of pesticides usage. Minute amounts of long chain polymers added to water has been known to arrest the droplet rebound effect on superhydrophobic surfaces. Previous studies have attributed different reasons like extensional viscosity, dominance of elastic stresses or slowing down of contact line in retraction phase due to stretching of polymer chains. The present study attempts to unravel the existence of critical criteria of polymer concentration and impact velocity on the inhibition of droplet rebound. The impact velocity will indirectly influence the shear rate during the retraction phase, and the polymer concentration dictates the relaxation timescale of the elastic fluids. Finally we show that the Weissenberg number (at onset of retraction), which quantifies both the elastic effects of polymer chains and the hydrodynamics, is the critical parameter in determining the regime of onset of rebound suppression, and that there exists a critical value which determines the onset of bounce arrest. The previous three causes, which are manifestations of elastic effects in non-Newtonian fluids, can be related with the proposed Weissenberg number criterion. △ Less

Submitted 23 June, 2019; originally announced July 2019.

Comments: 11 pages, 8 figures

Elemental substitution tuned magneto elastoviscous behavior of nanoscale ferrite MFe2O4 M = Mn, Fe, Co, Ni based complex fluids

Authors: Ankur Chattopadhyay, Subhajyoti Samanta, Rajendra Srivastava, Rajib Mondal, Purbarun Dhar

Abstract: The present article reports the governing influence of substituting the M2 site in nanoscale MFe2O4 spinel ferrites by different magnetic metals Fe,Mn,Co,Ni on magnetorheological and magneto elastoviscous behaviors of the corresponding magnetorheological fluids MRFs. Different doped MFe2O4 nanoparticles have been synthesized using the polyol assisted hydrothermal method. Detailed steady and oscill… ▽ More The present article reports the governing influence of substituting the M2 site in nanoscale MFe2O4 spinel ferrites by different magnetic metals Fe,Mn,Co,Ni on magnetorheological and magneto elastoviscous behaviors of the corresponding magnetorheological fluids MRFs. Different doped MFe2O4 nanoparticles have been synthesized using the polyol assisted hydrothermal method. Detailed steady and oscillatory shear rheology have been performed on the MRFs to determine the magneto-viscoelastic responses. The MRFs exhibit shear thinning behavior and augmented yield characteristics under influence of magnetic field. The steady state magnetoviscous behaviors are scaled against the governing Mason number and self similar response from all the MRFs have been noted. The MRFs conform to an extended Bingham plastic model under field effect. Transient magnetoviscous responses show distinct hysteresis behaviors when the MRFs are exposed to time varying magnetic fields. Oscillatory shear studies using frequency and strain amplitude sweeps exhibit predominant solid like behaviors under field environment. However, the relaxation behaviors and strain amplitude sweep tests of the MRFs reveal that while the fluids show solid like behaviors under field effect, they cannot be termed as typical elastic fluids. Comparisons show that the MnFe2O4 MRFs have superior yield performance among all. However, in case of dynamic and oscillatory systems, CoFe2O4 MRFs show the best performance. The viscoelastic responses of the MRFs are noted to correspond to a three element viscoelastic model. The study may find importance in design and development strategies of nano MRFs for different applications. △ Less

Submitted 19 February, 2019; originally announced February 2019.

Interplay of electro thermo solutal advection and internal electrohydrodynamics governed enhanced evaporation of droplets

Authors: Vivek Jaiswal, Purbarun Dhar

Abstract: The article experimentally reveals and theoretically establishes the influence of electric fields on the evaporation kinetics of pendant droplets. It is shown that the evaporation kinetics of saline pendant droplets can be augmented by the application of an external alternating electric field. The evaporation behaviour is modulated by an increase in the field strength and frequency. The classical… ▽ More The article experimentally reveals and theoretically establishes the influence of electric fields on the evaporation kinetics of pendant droplets. It is shown that the evaporation kinetics of saline pendant droplets can be augmented by the application of an external alternating electric field. The evaporation behaviour is modulated by an increase in the field strength and frequency. The classical diffusion driven evaporation model is found insufficient in predicting the improved evaporation rates. The change in surface tension due to field constraint is insufficient for explaining the observed physics. Consequently, the internal hydrodynamics of the droplet is probed employing particle image velocimetry. It is revealed that the electric field induces enhanced internal advection, which improves the evaporation rates. A scaled analytical model is proposed to understand the role of internal electrohydrodynamics, electrothermal and the electrosolutal effects. Stability maps reveal that the advection is caused nearly equally by the electrosolutal and electrothermal effects within the droplet. The model is able to illustrate the influence played by the governing thermal and solutal Marangoni number, the electro Prandtl and electro Schmidt number, and the associated Electrohydrodynamic number. The magnitude of the internal circulation can be well predicted by the proposed model, which validates the proposed mechanism. △ Less

Submitted 19 February, 2019; originally announced February 2019.

Interplay of substrate inclination and wettability on droplet impact dynamics

Authors: Nilamani Sahoo, Gargi Khurana, A R Harikrishnan, Devranjan Samanta, Purbarun Dhar

Abstract: Experimental investigations were carried out to elucidate the role of surface wettability and inclination on the post impact dynamics of droplets. Maximum spreading diameter and spreading time were found to decrease with increasing inclination angle and normal Weber number for superhydrophobic surfaces. The experiments on SH surfaces were found to be in excellent agreement with an existing analyti… ▽ More Experimental investigations were carried out to elucidate the role of surface wettability and inclination on the post impact dynamics of droplets. Maximum spreading diameter and spreading time were found to decrease with increasing inclination angle and normal Weber number for superhydrophobic surfaces. The experiments on SH surfaces were found to be in excellent agreement with an existing analytical model, incorporated with the modifications for the oblique impact conditions. Energy ratios and elongation factor were also measured for different inclination angles. On inclined SH surfaces, different features like arrest of secondary droplet formation, reduced pinch off at the contact line and inclination dependent elongation mechanism were observed. Contrary to SH surfaces, hydrophilic surfaces show opposite trends of maximum spreading factor and spreading time with inclination angle and normal Weber number respectively. This was due to the dominance of tangential kinetic energy over adhesion energy and gravitational potential at higher inclination angles. Finally, colloidal solutions of nanoparticles were used to elucidate slip and disjoining pressure on SH and hydrophilic surfaces, respectively. Overall, the article provides a comprehensive picture of post impact dynamics of droplets on inclined surfaces encompassing a broad spectrum of governing parameters like Reynolds number, Weber number, degree of inclination and surface wettability. △ Less

Submitted 19 February, 2019; originally announced February 2019.

Post collision hydrodynamics of droplets on cylindrical bodies of variant convexity and wettability

Authors: Gargi Khurana, Nilamani Sahoo, Purbarun Dhar

Abstract: Post impingement morphology and dynamics of water droplets on convex cylindrical surfaces has been explored experimentally. Droplet impact and post-impact feature studies have been conducted on hydrophillic and superhydrophobic cylindrical surfaces. Effects of the impact Weber number and target-to-drop diameter ratio have been studied. The post-impact hydrodynamics have been quantified using the w… ▽ More Post impingement morphology and dynamics of water droplets on convex cylindrical surfaces has been explored experimentally. Droplet impact and post-impact feature studies have been conducted on hydrophillic and superhydrophobic cylindrical surfaces. Effects of the impact Weber number and target-to-drop diameter ratio have been studied. The post-impact hydrodynamics have been quantified using the wetting fraction, the spreading factor and nondimensional film thickness at the north pole of the target. The observations reveal that the wetting fraction and spread factor increases with an increase in the impact We and decrease in the target to drop diameter ratio. An opposite trend is noted for nondimensional film thickness at the targets north pole. It is also deduced that the spread factor is independent of the target wettability. The lamella dynamics post spreading has also been observed to be a strong function of the wettability, impact We and the diameter ratio. An analytical expression for temporal evolution of film thickness at north pole of the cylinderical target is derieved. Another theoretical model based on energy conservation for predicting the maximum wetting fraction for variant cylindrical targets in terms of the governing We and Capillary number and the experimental measurements are in good agreement with the theoretical predictions. △ Less

Submitted 23 September, 2018; originally announced September 2018.

Competitive electrohydrodynamic and electrosolutal advection arrests evaporation kinetics of droplets

Authors: Vivek Jaiswal, Shubham Singh, A R Harikrishnan, Purbarun Dhar

Abstract: The present article reports the hitherto unreported phenomenon of arrested evaporation dynamics in pendent droplets in an electric field ambience. The evaporation kinetics of pendant droplets of electrically conducting saline solutions in the presence of a transverse, alternating electric field is investigated experimentally. It has been observed that while increase of field strength arrests the e… ▽ More The present article reports the hitherto unreported phenomenon of arrested evaporation dynamics in pendent droplets in an electric field ambience. The evaporation kinetics of pendant droplets of electrically conducting saline solutions in the presence of a transverse, alternating electric field is investigated experimentally. It has been observed that while increase of field strength arrests the evaporation, increment in field frequency has the opposite effect. The same has been explained on the solvation kinetics of the ions in the polar water. Theoretical analysis reveals that change in surface tension and diffusion driven evaporation model cannot predict the arrested or decelerated evaporation. With the aid of Particle Image Velocimetry, suppression of internal circulation velocity within the droplet is observed under electric field stimulus, and this affects the evaporation rate directly. A mathematical scaling model is proposed to quantify the effects of electrohydrodynamic circulation, electrothermal and electro-solutal advection on the evaporation kinetics of the droplet. The analysis encompasses major governing parameters, viz. the thermal and solutal Marangoni numbers, the Electrohydrodynamic number, the electro Prandtl and electro Schmidt numbers and their respective contributions. It has been shown that the electrothermal Marangoni effect is supressed by the electric field, leading to deteriorated evaporation rates. Additionally, the electrosolutal Marangoni effect further supresses the internal advection, which again arrests the evaporation rate by a larger proportion. Stability analysis reveals that the electric body force retards the stable internal circulation within such droplets and arrests advection. △ Less

Submitted 7 July, 2018; originally announced July 2018.

Streamer evolution arrest governed amplified AC breakdown strength of graphene and CNT colloids

Authors: Purbarun Dhar, Ankur Chattopadhyay, Lakshmi Sirisha Maganti, A R Harikrishnan

Abstract: The present article experimentally explores the concept of large improving the AC dielectric breakdown strength of insulating mineral oils by the addition of trace amounts of graphene or CNTs to form stable dispersions. The nano-oils infused with these nanostructures of high electronic conductance indicate superior AC dielectric behaviour in terms of augmented breakdown strength compared to the ba… ▽ More The present article experimentally explores the concept of large improving the AC dielectric breakdown strength of insulating mineral oils by the addition of trace amounts of graphene or CNTs to form stable dispersions. The nano-oils infused with these nanostructures of high electronic conductance indicate superior AC dielectric behaviour in terms of augmented breakdown strength compared to the base oils. Experimental observations of two grades of synthesized graphene and CNT nano-oils show that the nanomaterials not only improve the average breakdown voltage but also significantly improve the reliability and survival probabilities of the oils under AC high voltage stressing. Improvement of the tune of ~ 70-80 % in the AC breakdown voltage of the oils has been obtained via the present concept. The present study examines the reliability of such nano-colloids with the help of two parameter Weibull distribution and the oils show greatly augmented electric field bearing capacity at both standard survival probability values of 5 % and 63.3 %. The fundamental mechanism responsible for such observed outcomes is reasoned to be delayed streamer development and reduced streamer growth rates due to effective electron scavenging by the nanostructures from the ionized liquid insulator. A mathematical model based on the principles of electron scavenging is proposed to quantify the amount of electrons scavenged by the nanostructures. The same is then employed to predict the enhanced AC breakdown voltage and the experimental values are found to match well with the model predictions. The present study can have strong implications in efficient, reliable and safer operation of real life AC power systems. △ Less

Submitted 7 July, 2018; originally announced July 2018.

Electromagnetic field orientation and dynamics governs advection characteristics within pendent droplets

Authors: Purbarun Dhar, Vivek Jaiswal, A R Harikrishnan

Abstract: The article reports the domineering governing role played by the direction of electric and magnetic fields on the internal advection pattern and strength within salt solution pendant droplets. Literature shows that solutal advection drives circulation cells within salt based droplets. Flow visualization and velocimetry reveals that the direction of the applied field governs the enhancement/reducti… ▽ More The article reports the domineering governing role played by the direction of electric and magnetic fields on the internal advection pattern and strength within salt solution pendant droplets. Literature shows that solutal advection drives circulation cells within salt based droplets. Flow visualization and velocimetry reveals that the direction of the applied field governs the enhancement/reduction in circulation velocity and the directionality of circulation inside the droplet. Further, it is noted that while magnetic fields augment the circulation velocity, the electric field leads to deterioration of the same. The concepts of electro andmagnetohydrodynamics are appealed to and a Stokesian stream function based mathematical model to deduce the field mediated velocities has been proposed. The model is found to reveal the roles of and degree of dependence on the governing Hartmann, Stuart, Reynolds and Masuda numbers. The theoretical predictions are observed to be in good agreement with experimental average spatio-temporal velocities. The present findings may have strong implications in microscale electro and/or magnetohydrodynamics. △ Less

Submitted 7 July, 2018; originally announced July 2018.

Journal ref: Phys. Rev. E 98, 063103 (2018)

Amplifying thermal conduction calibre of nanocolloids employing induced electrophoresis

Authors: Purbarun Dhar, Lakshmi Sirisha Maganti, A R Harikrishnan, Chandan Rajput

Abstract: Electrophoresis has been shown as a novel methodology to enhance heat conduction capabilities of nanocolloidal dispersions. A thoroughly designed experimental system has been envisaged to solely probe heat conduction across nanofluids by specifically eliminating the buoyancy driven convective component. Electric field is applied across the test specimen in order to induce electrophoresis in conjun… ▽ More Electrophoresis has been shown as a novel methodology to enhance heat conduction capabilities of nanocolloidal dispersions. A thoroughly designed experimental system has been envisaged to solely probe heat conduction across nanofluids by specifically eliminating the buoyancy driven convective component. Electric field is applied across the test specimen in order to induce electrophoresis in conjunction with the existing thermal gradient. It is observed that the electrophoretic drift of the nanoparticles acts as an additional thermal transport drift mechanism over and above the already existent Brownian diffusion and thermophoresis dominated thermal conduction. A scaling analysis of the thermophoretic and electrophoretic velocities from classical Huckel-Smoluchowski formalism is able to mathematically predict the thermal performance enhancement due to electrophoresis. It is also inferred that the dielectric characteristics of the particle material is the major determining component of the electrophoretic amplification of heat transfer. Influence of surfactants has also been probed into and it is observed that enhancing the stability via surface charge modulation can in fact enhance the electrophoretic drift, thereby enhancing heat transfer calibre. Also, surfactants ensure colloidal stability as well as chemical gradient induced recirculation, thus ensuring colloidal phase equilibrium and low hysteresis in spite of the directional drift in presence of electric field forcing. The findings may have potential implications in enhanced and tunable thermal management of micro nanoscale devices. △ Less

Submitted 7 July, 2018; originally announced July 2018.

Internal advection dynamics in sessile droplets depend on the curvature of superhydrophobic surfaces

Authors: Gargi Khurana, A R Harikrishnan, Vivek Jaiswal, Purbarun Dhar

Abstract: The article demonstrates that the internal circulation velocity and patterns in sessile droplets on superhydrophobic surfaces is governed by the surface curvature. Particle Image Velocimetry reveals that increasing convexity deteriorates the advection velocity whereas concavity augments it. A scaling model based on the effective curvature modulated change in wettability can predict the phenomenon,… ▽ More The article demonstrates that the internal circulation velocity and patterns in sessile droplets on superhydrophobic surfaces is governed by the surface curvature. Particle Image Velocimetry reveals that increasing convexity deteriorates the advection velocity whereas concavity augments it. A scaling model based on the effective curvature modulated change in wettability can predict the phenomenon, but weakly. Potential flow theory is appealed to and the curvatures are approximated as wedges with the rested droplet engulfing them partly. The spatially averaged experimental velocities are found to conform to predictions. The study may have strong implications in thermofluidics transport phenomena at the microscale. △ Less

Submitted 14 June, 2018; originally announced June 2018.

Magnetohydrodynamics and magneto-solutal transport mediated evaporation dynamics in paramagnetic pendent droplets under field stimulus

Authors: Vivek Jaiswal, Raghvendra Kumar Dwivedi, A R Harikrishnan, Purbarun Dhar

Abstract: Evaporation kinetics of pendant droplets is an area of immense importance in several applications in addition to possessing rich fluid and thermal transport physics. The present article experimentally and analytically sheds insight into the augmented evaporation dynamics of paramagnetic pendent droplets in the presence of a magnetic field stimulus. Literature provides information that solutal adve… ▽ More Evaporation kinetics of pendant droplets is an area of immense importance in several applications in addition to possessing rich fluid and thermal transport physics. The present article experimentally and analytically sheds insight into the augmented evaporation dynamics of paramagnetic pendent droplets in the presence of a magnetic field stimulus. Literature provides information that solutal advection and solutal Marangoni effect lead to enhancement of evaporation in droplets with ionic inclusions. The major crux of the present article remains to modulate the thermosolutal advection with the aid of magnetic field and comprehend the dynamics of the evaporation process under such complex multiphysics interactions. Experimental observations reveal that the evaporation rate enhances as a direct function of the magnetic moment of the solvated magnetic element ions, thereby pinpointing at the magnetophoretic and magneto-solutal advection. Additionally, flow visualization by PIV illustrates that the internal advection currents within the droplet are strengthened in magnitude as well as distorted in orientation by the magnetic field. A mathematical formalism based on magnetothermal and magnetosolutal advection effects has been proposed via scaling analysis of the species and energy conservation equations. The formalism takes into account all major governing factors such as the magnetothermal and magnetosolutal Marangoni numbers, magneto Prandtl and magneto Schmidt numbers and the Hartmann number. The modeling establishes the magnetosolutal advection component to be the domineering factor in augmented evaporation dynamics. Accurate validation of the experimental internal circulation velocity is obtained from the proposed model. The present study reveals rich insight on the magneto thermosolutal hydrodynamics aspects in paramagnetic droplets. △ Less

Submitted 14 June, 2018; originally announced June 2018.

Journal ref: Phys. Rev. E 98, 013109 (2018)

Heat spreader with parallel microchannel configurations employing nanofluids for near active cooling of MEMS

Authors: Lakshmi Sirisha Maganti, Purbarun Dhar, T Sundararajan, Sarit Kumar Das

Abstract: While parallel microchannel based cooling systems have been around for quite a period of time, employing the same and incorporating them for near active cooling of microelectronic devices is yet to be implemented and the implications of the same on thermal mitigation to be understood. The present article focusses on a specific design of the PMCS such that it can be implemented at ease on the heat… ▽ More While parallel microchannel based cooling systems have been around for quite a period of time, employing the same and incorporating them for near active cooling of microelectronic devices is yet to be implemented and the implications of the same on thermal mitigation to be understood. The present article focusses on a specific design of the PMCS such that it can be implemented at ease on the heat spreader of a modern microprocessor to obtain near active cooling. Extensive experimental and numerical studies have been carried out to comprehend the same and three different flow configurations of PMCS have been adopted for the present investigations. Additional to focussing on the thermofluidics due to flow configuration, nanofluids have also been employed to achieve the desired essentials of mitigation of overshoot temperatures and improving uniformity of cooling. Two modelling methods, Discrete Phase Modelling and Effective Property Modelling have been employed for numerical study to model nanofluids as working fluid in micro flow paths and the DPM predictions have been observed to match accurately with experiments. To quantify the thermal performance of PMCS, an appropriate Figure of Merit has been proposed. From the FoM It has been perceived that the Z configuration employing nanofluid is the best suitable solutions for uniform thermal loads to achieve uniform cooling as well as reducing maximum temperature produced with in the device. The present results are very promising and viable approach for futuristic thermal mitigation of microprocessor systems. △ Less

Submitted 27 February, 2017; originally announced April 2017.

Effects of interplay of nanoparticles, surfactants and base fluid on the interfacial tension of nanocolloids

Authors: A R Harikrishnan, Purbarun Dhar, PK Agnihotri, Sateesh Gedupudi, Sarit K Das

Abstract: A systematically designed study has been conducted to understand and clearly demarcate the degree of contribution by the constituting elements to the surface tension of nanocolloids. The effects of elements such as surfactants, particles and the combined effects of these on the interfacial tension of these complex fluids are studied employing pendant drop shape analysis method by fitting Young Lap… ▽ More A systematically designed study has been conducted to understand and clearly demarcate the degree of contribution by the constituting elements to the surface tension of nanocolloids. The effects of elements such as surfactants, particles and the combined effects of these on the interfacial tension of these complex fluids are studied employing pendant drop shape analysis method by fitting Young Laplace equation. Only particle has shown considerable increase in surface tension with particle concentration in a polar medium like DI water whereas only marginal effect particles on surface tension in weakly polar mediums like glycerol and ethylene glycol. Such behaviour has been attributed to the enhanced desorption of particles to the interface and a mathematical framework has been derived to quantify this. Combined particle and surfactant effect on surface tension of complex nanofluid system showed a decreasing behaviour with respect to the particle and surfactant concentration with a considerably feeble effect of particle concentration. This combined colloidal system recorded a surface tension value below the surface tension of aqueous surfactant system at the same concentration, which is a counterintuitive observation as only particle results in increase in surface tension and only surfactant results in decrease in surface tension. The possible physical mechanism behind such an anomaly happening at the complex fluid air interface has been explained. Detailed analyses based on thermodynamic, mechanical and chemical equilibrium of the constituents and their adsorption-desorption characteristics as extracted from Gibbs adsorption analysis has been provided. △ Less

Submitted 19 October, 2016; originally announced October 2016.

Comments: 31 pages 12 figures

Smart viscoelastic and self-healing characteristics of graphene nano-gels

Authors: Purbarun Dhar, Ajay Katiyar, Lakshmi Sirisha Maganti

Abstract: Readily synthesizable nano-graphene and poly ethylene glycol based stable gels have been synthesized employing an easy refluxing method and exhaustive rheological and viscoelastic characterizations have been performed to understand the nature of such complex gel systems. The gels exhibit shear thinning response with pronounced yield stress values which is indicative of a microstructure where the g… ▽ More Readily synthesizable nano-graphene and poly ethylene glycol based stable gels have been synthesized employing an easy refluxing method and exhaustive rheological and viscoelastic characterizations have been performed to understand the nature of such complex gel systems. The gels exhibit shear thinning response with pronounced yield stress values which is indicative of a microstructure where the graphene nanoflakes intercalate with the polymer chains and form a pseudo spring damper network. Experimentations on the thixotropic behavior of the gels indicate that the presence of the G nanoflakes leads to immensely augmented structural stability capable of withstanding severe impact shears. Further information about the localized interactions of the G nanoflakes with the polymer chains is revealed from the amplitude and frequency sweep analyses in both linear and nonlinear viscoelastic regimes. Massively enhanced cross over amplitude values are recorded and several smart effects such as enhanced elastic behavior at increasing forcing frequencies are registered. Structural resonance induced disruption of the elastic behavior is observed for the gels for a given range of frequency and the proposition of resonance has been justified mathematically. It is observed that post this resonance bandwidth, the gels are able to self-heal and regain their original elastic behavior back without any external intervention. More detailed information on the viscoelastic nature of the gels has been obtained from creep and recovery compliance tests and justifications for the spring damper microstructure has been obtained. Smart features such as enhanced stress relaxation behavior with increasing strain have been observed and the same explained based on the proposed microstructure. △ Less

Submitted 13 August, 2016; originally announced August 2016.

Selecting optimal parallel microchannel configurations for active hot spot mitigation of multicore microprocessors in real time

Authors: Lakshmi Sirisha Maganti, Purbarun Dhar, T Sundararajan, Sarit K Das

Abstract: Design of effective micro cooling systems to address the challenges of ever increasing heat flux from microdevices requires deep examination of real time problems and has been tackled in depth. The most common and apparently misleading assumption while designing micro cooling systems is that the heat flux generated by the device is uniform, but the reality is far from this. Detailed simulations ha… ▽ More Design of effective micro cooling systems to address the challenges of ever increasing heat flux from microdevices requires deep examination of real time problems and has been tackled in depth. The most common and apparently misleading assumption while designing micro cooling systems is that the heat flux generated by the device is uniform, but the reality is far from this. Detailed simulations have been performed by considering non uniform heat load employing the configurations U, I, Z for parallel microchannel systems with water and nanofluids as the coolants. An Intel Core i7 4770 3.40 GHz quad core processor has been mimicked using heat load data retrieved from a real microprocessor with non-uniform core activity. The study clearly demonstrates that there is a non-uniform thermal load induced temperature maldistribution along with the already existent flow maldistribution induced temperature maldistribution. The suitable configuration(s) for maximum possible overall heat removal for a hot zone while maximizing the uniformity of cooling have been tabulated. An Eulerian Lagrangian model of the nanofluids show that such smart coolants not only reduce the hot spot core temperature, but also the hot spot core region and thermal slip mechanisms of Brownian diffusion and thermophoresis are at the crux of this. The present work conclusively shows that high flow maldistribution leads to high thermal maldistribution, as the common prevalent notion, is no longer valid and existing maldistribution can be effectively utilized to tackle specific hot spot location, making the present study important to the field. △ Less

Submitted 10 July, 2016; originally announced July 2016.

Comments: 25 pages 11 figures

Mega electrorheological phenomena in graphene nanogels

Authors: Purbarun Dhar, Ajay Katiyar, Arvind Pattamatta, Sarit K Das

Abstract: Unprecedentedly massive electrorheology has been reported for dilute graphene nanoflakes based ER fluids that have been engineered as novel, readily synthesizable polymeric gels. Polyethylene glycol based graphene gels have been synthesized and very high ER response, 25,000 percent enhancement in viscosity under influence of electric field, has been observed for low concentration systems 2 wt. per… ▽ More Unprecedentedly massive electrorheology has been reported for dilute graphene nanoflakes based ER fluids that have been engineered as novel, readily synthesizable polymeric gels. Polyethylene glycol based graphene gels have been synthesized and very high ER response, 25,000 percent enhancement in viscosity under influence of electric field, has been observed for low concentration systems 2 wt. percent. The gels overcome several drawbacks innate to ER fluids. The gels exhibit long term stability, high graphene packing ratio which ensures very high ER response and the microstructure of the gels ensure that fibrillation of the graphene nanoflakes under field is undisturbed by thermal fluctuations, further leading to mega ER. The gels exhibit large yield stress handling caliber with yield stress observed as high as 13 kPa at 2 wt. perc. graphene. Detailed investigations on the effects of graphene concentration, electric field strength, imposed shear resistance and transients of electric field actuation on the ER response of the gels have been performed. The gels show nearly negligible hysteresis with respect to electro viscous effects which speak of the stability and responsiveness required in transient situations. Indepth analyses with explanations have been provided for the observations and effects, such as sheet over-crowding induced loss of structural integrity at high concentrations and inter flake lubrication or slip induced augmented ER response. The present gels show great promise as potential ER gels for variant smart applications, such as damping and vibration control in active aircraft and vehicle structures, micronanoscale electroactuation, in suspensions or braking clutching in high performance specialized vehicular systems, etc. △ Less

Submitted 10 July, 2016; originally announced July 2016.

Comments: 29 pages 10 figures

Thermally smart characteristics of nanofluids in parallel microchannel systems to mitigate hot spots in MEMS

Authors: Lakshmi Sirisha Maganti, Purbarun Dhar, T Sundararajan, Sarit K Das

Abstract: Mitigation of hot spots in MEMS employing in situ microchannel systems requires a comprehensive picture of the maldistribution of the working fluid and uniformity of cooling within the same. In this article, detailed simulations employing parallel micro channel systems with specialized manifold-channel configurations i.e. U, I and Z have been performed. Eulerian Lagrangian Discrete Phase Model and… ▽ More Mitigation of hot spots in MEMS employing in situ microchannel systems requires a comprehensive picture of the maldistribution of the working fluid and uniformity of cooling within the same. In this article, detailed simulations employing parallel micro channel systems with specialized manifold-channel configurations i.e. U, I and Z have been performed. Eulerian Lagrangian Discrete Phase Model and Effective Property Model with water and alumina water nanofluid as working fluids have been employed. The distributions of the dispersed particulate phase and continuous phase have been observed to be, in general, different from the flow distribution and this has been found to be strongly dependent on the flow configuration. Particle maldistribution has been conclusively shown to be influenced by various migration and diffusive phenomena like Stokesian drag, Brownian motion, thermophoretic drift, etc. To understand the uniformity of cooling within the device, which is of importance in real time scenario, an appropriate figure of merit has been proposed. It has been observed that uniformity of cooling improved using nanofluid as working fluid as well as enhanced relative cooling in hot zones, providing evidence of the smart nature of such dispersions. To further quantify this smart effect, real time mimicking hot-spot scenarios have been computationally probed with nanofluid as the coolant. A silicon-based microchip emitting non-uniform heat flux (gathered from real-time monitoring of an Intel Core i7 4770 3.40 GHz quad core processor) under various processor load conditions has been studied and evidence of enhanced cooling of hot spots has been obtained from DPM analysis. △ Less

Submitted 1 May, 2016; originally announced May 2016.

Comments: 33 pages, 14 figures

Particle and thermo-hydraulic maldistribution of nanofluids in parallel microchannel systems

Authors: Lakshmi Sirisha Maganti, Purbarun Dhar, T. sundararajan, Sarit K Das

Abstract: Fluidic maldistribution in microscale multichannel devices requires deep understanding to achieve optimized flow and heat transfer characteristics. A thorough computational study has been performed to understand the concentration and thermohydraulic maldistribution of nanofluids in parallel microchannel systems using an Eulerian Lagrangian twin phase model. The study reveals that nanofluids cannot… ▽ More Fluidic maldistribution in microscale multichannel devices requires deep understanding to achieve optimized flow and heat transfer characteristics. A thorough computational study has been performed to understand the concentration and thermohydraulic maldistribution of nanofluids in parallel microchannel systems using an Eulerian Lagrangian twin phase model. The study reveals that nanofluids cannot be treated as homogeneous single phase fluids in such complex flow domains and effective property models fail drastically to predict the performance parameters. To comprehend the distribution of the particulate phase, a novel concentration maldistribution factor has been proposed. It has been observed that distribution of particles need not essentially follow the flow pattern, leading to higher thermal performance than expected from homogeneous models. Particle maldistribution has been conclusively shown to be due to various migration and diffusive phenomena like Stokesian drag, Brownian motion, thermophoretic drift, etc. The implications of particle distribution on the cooling performance have been illustrated and smart fluid effects (reduced magnitude of maximum temperature) have been observed and a mathematical model to predict the enhanced cooling performance in such flow geometries has been proposed. The article presents lucidly the effectiveness of discrete phase approach in modelling nanofluid thermohydraulics and sheds insight on behavior of nanofluids in complex flow domains. △ Less

Submitted 14 December, 2015; originally announced January 2016.

Comments: 37 pages 16 figures (Manuscript under review)

Near field magnetostatics and Neel Brownian interactions mediated magnetorheological characteristics of highly stable nano ferrocolloids

Authors: Ajay Katiyar, Purbarun Dhar, Sarit K. Das, Tandra Nandi

Abstract: Magnetic nanocolloids with synthesized super paramagnetic Fe3O4 nanoparticles (SPION) (5 to 15 nm) dispersed in insitu developed Polyethylene Glycol (PEG 400) and nano silica complex have been synthesized. The PEG nano Silica complex physically encapsulates the SPIONs, ensuring no phase separation under high magnetic fields (1.2 T). Exhaustive magnetorheological investigations have been performed… ▽ More Magnetic nanocolloids with synthesized super paramagnetic Fe3O4 nanoparticles (SPION) (5 to 15 nm) dispersed in insitu developed Polyethylene Glycol (PEG 400) and nano silica complex have been synthesized. The PEG nano Silica complex physically encapsulates the SPIONs, ensuring no phase separation under high magnetic fields (1.2 T). Exhaustive magnetorheological investigations have been performed to comprehend the structural behavior and response of the ferrocolloids. Remarkable stability and reversibility have been observed under magnetic field for concentrated systems. The results exhibit the impact of particle concentration, size and encapsulation efficiency on parameters such as shear viscosity, yield stress, viscoelastic moduli, magnetoviscous hysteresis etc. Analytical models to reveal the system mechanism and mathematically predict the magnetoviscosity and magneto yield stress has been theorized. The mechanistic approach based on near field magnetostatics and Neel Brownian interactivities can predict the colloidal properties under the effect of field accurately. The colloid exhibits amplified storage and loss moduli alongside highly augmented linear viscoelastic region under magnetic stimuli. The transition of the colloidal state from fluidic phase to soft condensed phase and its viscoelastic stimuli under the influence of magnetic field has been explained based on the mathematical analysis. The remarkable stability, magnetic properties and accurate physical models reveal good promise for the colloids in transient situations viz. magneto MEMS/ NEMS devices, antiseismic damping, biomedical invasive treatments etc. △ Less

Submitted 30 November, 2015; originally announced December 2015.

Journal ref: Soft matter 11 (8), 1614-1627, (2015)

Enhanced dielectric breakdown performance of anatase and rutile titania based nano-oils

Authors: Ajay Katiyar, Purbarun Dhar, Lakshmi Sirisha Maganti, Sarit K. Das

Abstract: Nano oils synthesized by dispersing dielectric nanostructures counter common intuition as such nano oils possess substantially higher positive dielectric breakdown voltage with reduced streamer velocities than the base oils. Nano oils comprising stable and dilute homogeneous dispersions of two forms of titanium (IV) oxide (TiO2) nanoparticles (Anatase and Rutile) have been experimentally examined… ▽ More Nano oils synthesized by dispersing dielectric nanostructures counter common intuition as such nano oils possess substantially higher positive dielectric breakdown voltage with reduced streamer velocities than the base oils. Nano oils comprising stable and dilute homogeneous dispersions of two forms of titanium (IV) oxide (TiO2) nanoparticles (Anatase and Rutile) have been experimentally examined and observed to exhibit highly enhanced dielectric breakdown strength compared to conventional transformer oils. Indepth survey of literature yields that research on enhancing insulation properties of mineral oils by utilizing anatase and rutile titania nanoparticles is nought. The present study involves titania dispersed in two different grades of transformer oils, both with varied levels of thermal treatment, to obtain consistent and high degrees of enhancement in the breakdown strength, as well as high degrees of increment in the survival of the oils at elevated electrical stressing compared to the base oils, as obtained via detailed twin parameter Weibull distribution analysis of the experimental observations. It is also observed that heat treatment of the nano oils further enhances the dielectric breakdown performance. Additionally, further enhancements are observed at elevated operational temperatures. Detailed studies on the performance of the nano oils in presence of variant quantities of moisture have also been put forward. The grossly different charging dynamics of dielectric nanoparticles localized within the oil has been proposed to be responsible for efficient electron trapping, leading to decrease in the positive streamer velocity and resulting in high dielectric breakdown voltage. The differences in the performance of anatase and rutile has been explained based on the electronic structure of the two and the affinity towards electron scavenging. △ Less

Submitted 29 November, 2015; originally announced November 2015.

Comments: Under review in Nanotechnology (IOP) 28 pages 13 figures

Anomalously augmented charge transport capabilities of biomimetically transformed collagen intercalated nano graphene based biocolloids

Authors: Purbarun Dhar, Soumya Bhattacharya, Suprabha Nayar, Sarit K. Das

Abstract: Collagen micro fibrils bio mimetically intercalate graphitic structures in aqueous media to form graphene nano platelets collagen complex (G Cl). Synthesized G Cl based stable, aqueous bio nanocolloids exhibit anomalously augmented charge transportation capabilities over simple collagen or graphene based colloids. The concentration tunable electrical transport properties of synthesized aqueous G C… ▽ More Collagen micro fibrils bio mimetically intercalate graphitic structures in aqueous media to form graphene nano platelets collagen complex (G Cl). Synthesized G Cl based stable, aqueous bio nanocolloids exhibit anomalously augmented charge transportation capabilities over simple collagen or graphene based colloids. The concentration tunable electrical transport properties of synthesized aqueous G Cl bio nanocolloids has been experimentally observed, theoretically analyzed and mathematically modeled. A comprehensive approach to mathematically predict the electrical transport properties of simple graphene and collagen based colloids has been presented. A theoretical formulation to explain the augmented transport characteristics of the G Cl bio nanocolloids based on the physico chemical interactions among the two entities, as revealed from extensive characterizations of the G Cl bio complex, has also been proposed. Physical interactions between the zwitterionic amino acid molecules within the collagen triple helix with the polar water molecules and the delocalized π electrons of graphene and subsequent formation of partially charged entities has been found to be the crux mechanism behind the augmented transport phenomena. The analysis has been observed to accurately predict the degree of enhancement in transport of the concentration tunable composite colloids over the base colloids. The electrically active G Cl bio nanocolloids with concentration tunability promises find dual utility in novel gel bio electrophoresis based protein separation techniques and advanced surface charge modulated drug delivery using biocolloids. △ Less

Submitted 27 November, 2015; originally announced November 2015.

Journal ref: Langmuir 31 (12), 3696-3706, (2015)

Trimodal Charge Transport in Polar Liquid based Dilute Nanoparticulate Colloidal Dispersions

Authors: Purbarun Dhar, Arvind Pattamatta, Sarit K. Das

Abstract: The dominant modes of charge transport in variant polar liquid based nanoparticulate colloidal dispersions (dilute) have been theorized. Theories formulating electrical characteristics of colloids have often been found to over or under predict charge transport in dilute suspensions of nanoparticles in polar fluids owing to grossly different mechanistic behavior of concentrated systems. Three major… ▽ More The dominant modes of charge transport in variant polar liquid based nanoparticulate colloidal dispersions (dilute) have been theorized. Theories formulating electrical characteristics of colloids have often been found to over or under predict charge transport in dilute suspensions of nanoparticles in polar fluids owing to grossly different mechanistic behavior of concentrated systems. Three major interacting modes with independent yet simultaneous existence have been proposed and found to be consistent with analyses of experimental data. Electric Double Layer (EDL) formation at nanoparticle fluid interface conjugated electrophoresis under the influence of the electric field has been determined as one important mode of charge transport. Nanoparticle polarization due to short range field non-uniformity caused by the EDL with consequent particle motion due to interparticle electrostatic interactions acts as another mode of transport. Coupled electrothermal diffusion arising out of Brownian randomization in presence of the electric field has been determined as the third dominant mode. An analytical model based on discrete interactions of the charged particle fluid domains explains the various behavioral aspects of such dispersions, as observed and validated from detailed experimental analysis. The analysis is also predictive of the dominance and behavior of the three modes with important nanocolloid parameters such as temperature and concentration. △ Less

Submitted 27 November, 2015; originally announced November 2015.

Journal ref: Journal of Nanoparticle Research 16 (10), 1-20, (2014)

Colloidal graphite/graphene nanostructures using collagen showing enhanced thermal conductivity

Authors: Soumya Bhattacharya, Purbarun Dhar, Sarit K Das, Ranjan Ganguly, Thomas Webster, Suprabha Nayar

Abstract: Time kinetics of interaction of natural graphite (GR) to colloidal graphene (G) collagen (C) nanocomposites was studied at ambient conditions, and observed that just one day at ambient conditions is enough to form colloidal graphene directly from graphite using the protein collagen. Neither controlled temperature and pressure ambiance nor sonication was needed for the same; thereby rendering the p… ▽ More Time kinetics of interaction of natural graphite (GR) to colloidal graphene (G) collagen (C) nanocomposites was studied at ambient conditions, and observed that just one day at ambient conditions is enough to form colloidal graphene directly from graphite using the protein collagen. Neither controlled temperature and pressure ambiance nor sonication was needed for the same; thereby rendering the process biomimetic. Detailed spectroscopy, X ray diffraction, electron microscopy as well as fluorescence and luminescence assisted characterization of the colloidal dispersions on day one and day seven reveals graphene and collagen interaction and subsequent rearrangement to form an open structure. Detailed confocal microscopy, in the liquid state, reveals the initial attack at the zigzag edges of GR, the enhancement of auto fluorescence and finally the opening up of graphitic stacks of GR to form near transparent G. Atomic Force Microscopy studies prove the existence of both collagen and graphene and the disruption of periodicity at the atomic level. Thermal conductivity of the colloid shows a 17% enhancement for a volume fraction of less than 0.00005 of G. Time variant increase in thermal conductivity provides qualitative evidence for the transient exfoliation of GR to G. The composite reveals interesting properties that could propel it as a future material for advanced bio applications including therapeutics. △ Less

Submitted 27 November, 2015; originally announced November 2015.

Journal ref: International journal of nanomedicine 9, 1287, (2014)

Particle fluid interactivity deteriorates buoyancy driven thermal transport in nanosuspensions : A multi component lattice Boltzmann approach

Authors: Savithiri S, Purbarun Dhar, Arvind Pattamatta, Sarit K. Das

Abstract: Severe contradictions exist between experimental observations and computational predictions regarding natural convective thermal transport in nanosuspensions. The approach treating nanosuspensions as homogeneous fluids in computations has been pin pointed as the major contributor to such contradictions. To fill the void, inter particle and particle fluid interactivities (slip mechanisms), in addit… ▽ More Severe contradictions exist between experimental observations and computational predictions regarding natural convective thermal transport in nanosuspensions. The approach treating nanosuspensions as homogeneous fluids in computations has been pin pointed as the major contributor to such contradictions. To fill the void, inter particle and particle fluid interactivities (slip mechanisms), in addition to effective thermophysical properties, have been incorporated within the present formulation. Through thorough scaling analysis, the dominant slip mechanisms have been identified. A Multi Component Lattice Boltzmann Model (MCLBM) approach has been proposed, wherein the suspension has been treated as a non homogeneous twin component mixture with the governing slip mechanisms incorporated. The computations based on the mathematical model can accurately predict and quantify natural convection thermal transport in nanosuspensions. The role of slip mechanisms such as Brownian diffusion, thermophoresis, drag, Saffman lift, Magnus effect, particle rotation and gravitational effects have been pictured articulately. A comprehensive study on the effects of Rayleigh number, particle size and concentration reveals that the drag force experienced by the particles is dominantly responsible for deterioration of natural convective thermal transport. In essence, the dominance of Stokesian mechanics in such thermofluidic systems is established in the present study. For the first time, as revealed though thorough survey of existent literature, a numerical formulation explains the contradictions observed, rectifies the approach, predicts accurately and reveals the crucial mechanisms and physics of buoyancy driven thermal transport in nanosuspensions. △ Less

Submitted 14 November, 2015; originally announced November 2015.

Comments: Manuscript under advanced stage of peer review in Numerical Heat Transfer A. 37 pages, 12 figures

Analytical prediction of sub surface thermal history in translucent tissue phantoms during plasmonic photo thermotherapy

Authors: Purbarun Dhar, Anup Paul, Arunn Narasimhan, Sarit K Das

Abstract: Knowledge of thermal history in biological tissues during laser based hyperthermia is essential to achieve necrosis of tumour orcarcinoma cells. A semi analytical model to predict sub surface thermal history in translucent, soft, bio tissue mimics has been proposed. The model can accurately predict the spatio temporal temperature variations along depth and the anomalous thermal behaviour in such m… ▽ More Knowledge of thermal history in biological tissues during laser based hyperthermia is essential to achieve necrosis of tumour orcarcinoma cells. A semi analytical model to predict sub surface thermal history in translucent, soft, bio tissue mimics has been proposed. The model can accurately predict the spatio temporal temperature variations along depth and the anomalous thermal behaviour in such media, viz. occurrence of sub surface temperature peaks. Based on opto thermal properties, the augmented temperature and shift of the peak positions in case of gold nanostructure mediated tissue phantom hyperthermia can be predicted. Employing inverse approach, the absorbance coefficient of nano graphene infused tissue mimics is determined from the peak temperature and found to provide appreciably accurate predictions along depth. Furthermore, a simplistic, dimensionally consistent correlation to theoretically determine the position of the peak in such media is proposed and found to be consistent with experiments and computations. The model shows promise in predicting thermal history in optically active soft matter and deduction of therapeutic hyperthermia parameters, thereby providing a priori estimates for clinical trials. △ Less

Submitted 20 December, 2015; v1 submitted 14 November, 2015; originally announced November 2015.

Comments: The manuscript is under advanced stage of peer review in the Journal of Thermal Biology as an invited paper for the special issue on Thermoregulation and heat transfer in biological systems. 23 pages, 6 figures