-
Design of a Thomson scattering diagnostic for the SMART tokamak
Authors:
M. Kaur,
A. Diallo,
B. LeBlanc,
J. Segado-Fernandez,
E. Viezzer,
Roger Huxford,
A. Mancini,
D. J. Cruz-Zabala,
M. Podesta,
J. W. Berkery,
M. Garcia-Munoz
Abstract:
We describe the design of a Thomson scattering (TS) diagnostic to be used on the SMall Aspect Ratio Tokamak (SMART). SMART is a spherical tokamak being commissioned in Spain that aims to explore positive triangularity (PT) and negative triangularity (NT) plasma scenarios at a low aspect ratio. The SMART TS diagnostic is designed to enable a wide range of electron temperature (1 eV to 1 keV) and de…
▽ More
We describe the design of a Thomson scattering (TS) diagnostic to be used on the SMall Aspect Ratio Tokamak (SMART). SMART is a spherical tokamak being commissioned in Spain that aims to explore positive triangularity (PT) and negative triangularity (NT) plasma scenarios at a low aspect ratio. The SMART TS diagnostic is designed to enable a wide range of electron temperature (1 eV to 1 keV) and density (0.5 - 10 $\times 10^{19} ~\rm{m^{ - 3}}$) measurements. A 2Joule laser operating at 1064 nm will be used to probe the electron temperature and density of the plasma. The laser is capable of operating in the burst mode at 1kHz, 2kHz, and 4kHz to investigate fast phenomena or at $30$ Hz to study 1 sec (or more) long discharges. The scattered light will be collected over an angular range of 60-120 degrees at 28 spatial points in the midplane covering the core region and edge plasma on both the low-field side (LFS) and the high-field side (HFS). Simulation data is used to determine the optimum location of Thomson scattering measurement points to effectively resolve the edge pedestal in the LFS and HFS regions under different triangularity conditions. Each scattering signal will be spectrally resolved on five wavelength channels of a polychromator to obtain the electron temperature measurement. We will also present a method to monitor in-situ laser alignment in the core during calibrations and plasma operations.
△ Less
Submitted 18 July, 2024;
originally announced July 2024.
-
Simultaneous Enhancement of Tritium Burn Efficiency and Fusion Power with Low-Tritium Spin-Polarized Fuel
Authors:
J. F. Parisi,
A. Diallo,
J. A. Schwartz
Abstract:
This study demonstrates that using spin-polarized deuterium-tritium (D-T) fuel with more deuterium than tritium can increase tritium burn efficiency (TBE) by at least an order of magnitude without compromising fusion power output, compared to unpolarized fuel. Although previous studies show that a low tritium fraction can enhance TBE, this strategy resulted in reduced fusion power density. The sur…
▽ More
This study demonstrates that using spin-polarized deuterium-tritium (D-T) fuel with more deuterium than tritium can increase tritium burn efficiency (TBE) by at least an order of magnitude without compromising fusion power output, compared to unpolarized fuel. Although previous studies show that a low tritium fraction can enhance TBE, this strategy resulted in reduced fusion power density. The surprising improvement in TBE at fixed power reported here is due to the TBE increasing nonlinearly with decreasing tritium fraction but the fusion power density increasing roughly linearly with D-T cross section. A study is performed for an ARC-like tokamak producing 482 MW of fusion power with unpolarized 51:49 D-T fuel, finding the minimum startup tritium inventory ($I_{\mathrm{startup,min}}$) is 0.69 kg. By spin-polarizing half of the fuel and using a 57:43 D-T mix, $I_{\mathrm{startup,min}}$ is reduced to 0.08 kg, and fully spin-polarizing the fuel with a 61:39 D-T mix further reduces $I_{\mathrm{startup,min}}$ to 0.03 kg. Some ARC-like scenarios could achieve plasma ignition with relatively modest spin polarization. These findings indicate that, with advancements in helium divertor pumping efficiency, TBE values of approximately 10-40% could be achieved using low-tritium-fraction and spin-polarized fuel with minimal power loss. This would dramatically lower tritium startup inventory requirements and reduce the amount of on-site tritium. More generally than just for spin-polarized fuels, high plasma performance can be used to increase TBE. This strongly motivates the development of spin-polarized fuels and low-tritium-fraction operation for burning plasmas.
△ Less
Submitted 9 June, 2024;
originally announced June 2024.
-
Geometric Burn Control For Tokamaks
Authors:
J. F. Parisi,
J. W. Berkery,
A. Sladkomedova,
S. Guizzo,
M. R. Hardman,
J. R. Ball,
A. O. Nelson,
S. M. Kaye,
M. Anastopoulos-Tzanis,
S. A. M. McNamara,
J. Dominski,
S. Janhunen,
M. Romanelli,
D. Dickinson,
A. Diallo,
A. Dnestrovskii,
W. Guttenfelder,
C. Hansen,
O. Myatra,
H. R. Wilson
Abstract:
A new burn control scheme for tokamaks is described where the total fusion power is controlled by adjusting the plasma volume fraction that is packed into power dense regions. In an example spherical tokamak burning plasma, by modifying the plasma edge squareness the total fusion power is doubled at almost constant total plasma volume and fusion power density. Therefore, increased plasma squarenes…
▽ More
A new burn control scheme for tokamaks is described where the total fusion power is controlled by adjusting the plasma volume fraction that is packed into power dense regions. In an example spherical tokamak burning plasma, by modifying the plasma edge squareness the total fusion power is doubled at almost constant total plasma volume and fusion power density. Therefore, increased plasma squareness could be extremely beneficial to a fusion reactor and squareness control could be desirable for power load balancing. Experiments have observed the impact of increased edge squareness on modified core plasma volume, highlighting the practical relevance of this approach.
△ Less
Submitted 5 April, 2024;
originally announced April 2024.
-
Stability and Transport of Gyrokinetic Critical Pedestals
Authors:
J. F. Parisi,
A. O. Nelson,
W. Guttenfelder,
R. Gaur,
J. W. Berkery,
S. M. Kaye,
K. Barada,
C. Clauser,
A. Diallo,
D. R. Hatch,
A. Kleiner,
M. Lampert,
T. Macwan,
J. E. Menard
Abstract:
A gyrokinetic threshold model for pedestal width-height scaling prediction is applied to multiple devices and to a shaping and aspect-ratio scan giving $Δ_{\mathrm{ped}} = 0.92 A^{1.04} κ^{-1.24} 0.38^δ β_{θ,\mathrm{ped}}^{1.05}$ for pedestal width $Δ_{\mathrm{ped}}$, aspect-ratio $A$, elongation $κ$, triangularity $δ$, and normalized pedestal height $β_{θ,\mathrm{ped}}$. We also find a width-tran…
▽ More
A gyrokinetic threshold model for pedestal width-height scaling prediction is applied to multiple devices and to a shaping and aspect-ratio scan giving $Δ_{\mathrm{ped}} = 0.92 A^{1.04} κ^{-1.24} 0.38^δ β_{θ,\mathrm{ped}}^{1.05}$ for pedestal width $Δ_{\mathrm{ped}}$, aspect-ratio $A$, elongation $κ$, triangularity $δ$, and normalized pedestal height $β_{θ,\mathrm{ped}}$. We also find a width-transport scaling $Δ_{\mathrm{ped} } = 0.028 \left(q_e/Γ_e - 1.7 \right)^{1.5} \sim η_e ^{1.5}$ where $q_e$ and $Γ_e$ are turbulent electron heat and particle fluxes and $η_e = \nabla \ln T_e / \nabla \ln n_e$ for electron temperature $T_e$ and density $n_e$. Pedestals close to those limited by kinetic-ballooning-modes (KBMs) have modified turbulent transport properties compared to strongly driven KBMs. The role of flow shear is studied as a width-height scaling constraint and pedestal saturation mechanism for a standard and wide pedestal discharge.
△ Less
Submitted 25 January, 2024;
originally announced January 2024.
-
Kinetic-Ballooning-Bifurcation in Tokamak Pedestals Across Shaping and Aspect-Ratio
Authors:
J. F. Parisi,
A. O. Nelson,
R. Gaur,
S. M. Kaye,
F. I. Parra,
J. W. Berkery,
K. Barada,
C. Clauser,
A. J. Creely,
A. Diallo,
W. Guttenfelder,
J. W. Hughes,
L. A. Kogan,
A. Kleiner,
A. Q. Kuang,
M. Lampert,
T. Macwan,
J. E. Menard,
M. A. Miller
Abstract:
We use a new gyrokinetic threshold model to predict a bifurcation in tokamak pedestal width-height scalings that depends strongly on plasma shaping and aspect-ratio. The bifurcation arises from the first and second stability properties of kinetic-ballooning-modes that yields wide and narrow pedestal branches, expanding the space of accessible pedestal widths and heights. The wide branch offers pot…
▽ More
We use a new gyrokinetic threshold model to predict a bifurcation in tokamak pedestal width-height scalings that depends strongly on plasma shaping and aspect-ratio. The bifurcation arises from the first and second stability properties of kinetic-ballooning-modes that yields wide and narrow pedestal branches, expanding the space of accessible pedestal widths and heights. The wide branch offers potential for edge-localized-mode-free pedestals with high core pressure. For negative triangularity, low-aspect-ratio configurations are predicted to give steeper pedestals than conventional-aspect-ratio. Both wide and narrow branches have been attained in tokamak experiments.
△ Less
Submitted 7 April, 2024; v1 submitted 8 December, 2023;
originally announced December 2023.
-
Kinetic-Ballooning-Limited Pedestals in Spherical Tokamak Plasmas
Authors:
J. F. Parisi,
W. Guttenfelder,
A. O. Nelson,
R. Gaur,
A. Kleiner,
M. Lampert,
G. Avdeeva,
J. W. Berkery,
C. Clauser,
M. Curie,
A. Diallo,
W. Dorland,
S. M. Kaye,
J. McClenaghan,
F. I. Parra
Abstract:
A theoretical model is presented that for the first time matches experimental measurements of the pedestal width-height Diallo scaling in the low-aspect-ratio high-$β$ tokamak NSTX. Combining linear gyrokinetics with self-consistent pedestal equilibrium variation, kinetic-ballooning, rather than ideal-ballooning plasma instability, is shown to limit achievable confinement in spherical tokamak pede…
▽ More
A theoretical model is presented that for the first time matches experimental measurements of the pedestal width-height Diallo scaling in the low-aspect-ratio high-$β$ tokamak NSTX. Combining linear gyrokinetics with self-consistent pedestal equilibrium variation, kinetic-ballooning, rather than ideal-ballooning plasma instability, is shown to limit achievable confinement in spherical tokamak pedestals. Simulations are used to find the novel Gyrokinetic Critical Pedestal constraint, which determines the steepest pressure profile a pedestal can sustain subject to gyrokinetic instability. Gyrokinetic width-height scaling expressions for NSTX pedestals with varying density and temperature profiles are obtained. These scalings for spherical tokamaks depart significantly from that of conventional aspect ratio tokamaks.
△ Less
Submitted 7 April, 2024; v1 submitted 9 August, 2023;
originally announced August 2023.
-
EUV Debris Mitigation using Magnetic Nulls
Authors:
Ben Y. Israeli,
Christopher Berg Smiet,
Marien Simeni Simeni,
Ahmed Diallo
Abstract:
Next generation EUV sources for photolithography use light produced by laser-produced plasmas (LPP) from ablated tin droplets. A major challenge for extending the lifetime of these devices is mitigating damage caused by deposition of tin debris on the sensitive collection mirror. Especially difficult to stop are high energy (up to 10 keV) highly charged tin ions created in the plasma. Existing sol…
▽ More
Next generation EUV sources for photolithography use light produced by laser-produced plasmas (LPP) from ablated tin droplets. A major challenge for extending the lifetime of these devices is mitigating damage caused by deposition of tin debris on the sensitive collection mirror. Especially difficult to stop are high energy (up to 10 keV) highly charged tin ions created in the plasma. Existing solutions include the use of stopping gas, electric fields, and magnetic fields. One common configuration consists of a magnetic field perpendicular to the EUV emission direction, but such a system can result in ion populations that are trapped rather than removed. We investigate a previously unconsidered mitigation geometry consisting of a magnetic null by performing full-orbit integration of the ion trajectories in an EUV system with realistic dimensions, and optimize the coil locations for the null configuration. The magnetic null prevents a fraction of ions from hitting the mirror comparable to that of the perpendicular field, but does not trap any ions due to the chaotic nature of ion trajectories that pass close to the null. This technology can potentially improve LPP-based EUV photolithography system efficiency and lifetime, and may allow for a different, more efficient formulation of buffer gas.
△ Less
Submitted 20 July, 2023;
originally announced July 2023.
-
Microtearding mode study in NSTX using machine learning enhanced reduced model
Authors:
Max T. Curie,
Joel Larakers,
Jason Parisi,
Gary Staebler,
Stefano Munaretto,
Walter Guttenfelder,
Emily Belli,
David R. Hatch,
Mate Lampert,
Galina Avdeeva,
Tom Neiser,
Sterling Smith,
Ahmed Diallo,
Oak Nelson,
Stanley Kaye,
Eric Fredrickson,
Joshua M Manela,
Shelly Lei,
Michael Halfmoon,
Matthew M Tennery,
Ehab Hassan
Abstract:
This article presents a survey of NSTX cases to study the microtearing mode (MTM) stabilities using the newly developed global reduced model for Slab-Like Microtearing modes (SLiM). A trained neutral network version of SLiM enables rapid assessment (0.05s/mode) of MTM with $98\%$ accuracy providing an opportunity for systemic equilibrium reconstructions based on the matching of experimentally obse…
▽ More
This article presents a survey of NSTX cases to study the microtearing mode (MTM) stabilities using the newly developed global reduced model for Slab-Like Microtearing modes (SLiM). A trained neutral network version of SLiM enables rapid assessment (0.05s/mode) of MTM with $98\%$ accuracy providing an opportunity for systemic equilibrium reconstructions based on the matching of experimentally observed frequency bands and SLiM prediction across a wide range of parameters. Such a method finds some success in the NSTX discharges, the frequency observed in the experiment matches with what SLiM predicted. Based on the experience with SLiM analysis, a workflow to estimate the potential MTM frequency for a quick assessment based on experimental observation has been established.
△ Less
Submitted 18 April, 2023;
originally announced April 2023.
-
Effect of surface porosity of catalytic supports on plasma-assisted catalysis for ammonia synthesis
Authors:
S. Jaiswal,
Zhe Chen,
Sankaran Sundaresan,
Bruce E Koel,
Ahmed Diallo
Abstract:
A fundamental understanding of plasma-catalyst interactions is important for understanding reaction mechanisms, optimizing the catalyst, and increasing the efficiency of plasma-assisted catalytic process for ammonia (\ce{NH3}) synthesis. We report on the effect of the surface porosity of the catalyst support on this reaction carried out in a coaxial dielectric barrier discharge (DBD) plasma reacto…
▽ More
A fundamental understanding of plasma-catalyst interactions is important for understanding reaction mechanisms, optimizing the catalyst, and increasing the efficiency of plasma-assisted catalytic process for ammonia (\ce{NH3}) synthesis. We report on the effect of the surface porosity of the catalyst support on this reaction carried out in a coaxial dielectric barrier discharge (DBD) plasma reactor. The discharge was created using a variable AC applied voltage at room temperature and near atmospheric pressure (550 Torr). Two catalyst supports were compared: porous silica (\ce{SiO2}) ceramic beads and smooth, non-porous soda lime glass beads of almost equal diameter ($\sim$1.5 mm) were used. \ce{N2} conversion and the \ce{NH3} synthesis rate was increased with increasing voltage for both supports, but the energy yield for \ce{NH3} production increased for the \ce{SiO2} beads and decreased for the glass beads. All three of these parameters were always higher when using the \ce{SiO2} beads, which suggests that porosity can be a small advantage for plasma assisted \ce{NH3} synthesis. Discharge and plasma properties were estimated from Lissajous plots and using calculations with the BOLSIG+ software. The effect of different catalyst supports on the physical properties of the discharge was negligible. High resolution optical emission spectra (OES) were used to explore the evolution of gas phase active species, \ce{N2+}, atomic N, electronically excited \ce{N2}, and atomic H (H$_α$, H$_β$), in the plasma in the presence of both supports. The relative concentration of these species was lower in the case of the porous \ce{SiO2} beads for all applied voltages, which suggests that surface reactions are more significant than gas phase reactions for the formation of \ce{NH3} in plasma assisted \ce{NH3} synthesis.
△ Less
Submitted 6 November, 2021;
originally announced November 2021.
-
Perturbative Determination of Plasma Microinstabilities in Tokamaks
Authors:
A. O. Nelson,
F. M. Laggner,
A. Diallo,
Z. A. Xing,
D. R. Smith,
E. Kolemen
Abstract:
Recently, theoretical analysis has identified plasma microinstabilities as the primary mechanism responsible for anomalous heat transport in tokamaks. In particular, the microtearing mode (MTM) has been credited with the production of intense electron heat fluxes, most notably through a thin self-organized boundary layer called the pedestal. Here we exploit a novel, time-dependent analysis to comp…
▽ More
Recently, theoretical analysis has identified plasma microinstabilities as the primary mechanism responsible for anomalous heat transport in tokamaks. In particular, the microtearing mode (MTM) has been credited with the production of intense electron heat fluxes, most notably through a thin self-organized boundary layer called the pedestal. Here we exploit a novel, time-dependent analysis to compile explicit experimental evidence that MTMs are active in the pedestal region. The expected frequency of pedestal MTMs, calculated as a function of time from plasma profile measurements, is shown in a dedicated experiment to be in excellent agreement with observed magnetic turbulence fluctuations. Further, fast perturbations of the plasma equilibrium are introduced to decouple the instability drive and resonant location, providing a compelling validation of the analytical model. This analysis offers strong evidence of edge MTMs, validating the existing theoretical work and highlighting the important role of MTMs in regulating electron heat flow in tokamaks.
△ Less
Submitted 8 February, 2021;
originally announced February 2021.
-
Initial operation and data processing on a system for real-time evaluation of Thomson scattering signals on the Large Helical Device
Authors:
K. C. Hammond,
F. M. Laggner,
A. Diallo,
S. Doskoczynski,
C. Freeman,
H. Funaba,
D. A. Gates,
R. Rozenblat,
G. Tchilinguirian,
Z. Xing,
I. Yamada,
R. Yasuhara,
G. Zimmer,
E. Kolemen
Abstract:
A scalable system for real-time analysis of electron temperature and density based on signals from the Thomson scattering diagnostic, initially developed for and installed on the NSTX-U experiment, was recently adapted for the Large Helical Device (LHD) and operated for the first time during plasma discharges. During its initial operation run, it routinely recorded and processed signals for four s…
▽ More
A scalable system for real-time analysis of electron temperature and density based on signals from the Thomson scattering diagnostic, initially developed for and installed on the NSTX-U experiment, was recently adapted for the Large Helical Device (LHD) and operated for the first time during plasma discharges. During its initial operation run, it routinely recorded and processed signals for four spatial points at the laser repetition rate of 30 Hz, well within the system's rated capability for 60 Hz. We present examples of data collected from this initial run and describe subsequent adaptations to the analysis code to improve the fidelity of the temperature calculations.
△ Less
Submitted 23 June, 2021; v1 submitted 9 January, 2021;
originally announced January 2021.
-
Feasibility Study of a Laser-Based Approach for Diagnosing Deuterium Neutrals in the Edge of Fusion Devices
Authors:
David Feng,
Ahmed Diallo,
Mikhail N. Shneider
Abstract:
In magnetically-confined plasmas of tokamaks, neutral deuterium/hydrogen (D/H) atoms play a role in energy, momentum, and particle balance, as well as the stabilization of plasma turbulence. One key important fusion performance parameter is the pedestal density. Understanding the pedestal density formation is critical for the development of predictive model of future fusion devices. Typically, mea…
▽ More
In magnetically-confined plasmas of tokamaks, neutral deuterium/hydrogen (D/H) atoms play a role in energy, momentum, and particle balance, as well as the stabilization of plasma turbulence. One key important fusion performance parameter is the pedestal density. Understanding the pedestal density formation is critical for the development of predictive model of future fusion devices. Typically, measurements of the neutrals are obtained using optical emission spectroscopy of the Lyman alpha lines, which is a line-integrated measurement. The plasma in tokamaks is characterized by a high density of electrons and ions and a relatively low concentration of neutral hydrogen atoms, which could make direct measurement of density seemingly impossible at first.
We propose a laser-based method that allows for accurate measurement of both the spatial and absolute magnitude of the neutral D/H with minimal knowledge of the radial profiles of electron temperatures and densities. This relies on the fact that the neutral spectral profile can have a larger peak than the electron spectral profile and thus make the neutral density signal resolvable. In practice, this method can be co-located with Thomson scattering systems and is referred to as laser Rayleigh scattering (LRS).
More specifically, we assess and evaluate the LRS method for two test cases: in the midplane radii of the National Spherical Torus Experiment (NSTX), and in the small angle slot divertor configuration of DIII-D. Preliminary simulations and calculations will determine the feasibility of LRS in the presence of incoherent Thomson scattering under neutral densities ranging from $ 10^{13} $ to $ 10^{21} \ \text{m}^{-3} $. Wavelength dependence of LRS will be evaluated to determine the boost in the signal and photon generation capability.
△ Less
Submitted 7 December, 2019;
originally announced December 2019.
-
Gyrokinetic analysis and simulation of pedestals, to identify the culprits for energy losses using fingerprints
Authors:
M. Kotschenreuther,
X. Liu,
D. R. Hatch,
S. Mahajan,
L. Zheng,
A. Diallo,
R. Groebner,
the DIII-D TEAM,
J. C. Hillesheim,
C. F. Maggi,
C. Giroud,
F. Koechl,
V. Parail,
S. Saarelma,
E. Solano,
JET Contributors,
A. Chankin
Abstract:
Fusion performance in tokamaks hinges critically on the efficacy of the Edge Transport Barrier (ETB) at suppressing energy losses. The new concept of fingerprints is introduced to identify the instabilities that cause the transport losses in the ETB of many of today's experiments, from widely posited candidates. Analysis of the Gyrokinetic-Maxwell equations, and gyrokinetic simulations of experime…
▽ More
Fusion performance in tokamaks hinges critically on the efficacy of the Edge Transport Barrier (ETB) at suppressing energy losses. The new concept of fingerprints is introduced to identify the instabilities that cause the transport losses in the ETB of many of today's experiments, from widely posited candidates. Analysis of the Gyrokinetic-Maxwell equations, and gyrokinetic simulations of experiments, find that each mode type produces characteristic ratios of transport in the various channels: density, heat and impurities. This, together with experimental observations of transport in some channel, or, of the relative size of the driving sources of channels, can identify or determine the dominant modes causing energy transport. In multiple ELMy H-mode cases that are examined, these fingerprints indicate that MHD-like modes are apparently not the dominant agent of energy transport; rather, this role is played by Micro-Tearing Modes (MTM) and Electron Temperature Gradient (ETG) modes, and in addition, possibly Ion Temperature Gradient (ITG)/Trapped Electron Modes (ITG/TEM) on JET. MHD-like modes may dominate the electron particle losses. Fluctuation frequency can also be an important means of identification, and is often closely related to the transport fingerprint. The analytical arguments unify and explain previously disparate experimental observations on multiple devices, including DIII-D, JET and ASDEX-U, and detailed simulations of two DIII-D ETBs also demonstrate and corroborate this.
△ Less
Submitted 24 March, 2019;
originally announced March 2019.
