-
Correlations between X-rays, Visible Light and Drive-Beam Energy Loss Observed in Plasma Wakefield Acceleration Experiments at FACET-II
Authors:
Chaojie Zhang,
Doug Storey,
Pablo San Miguel Claveria,
Zan Nie,
Ken A. Marsh,
Warren B. Mori,
Erik Adli,
Weiming An,
Robert Ariniello,
Gevy J. Cao,
Christine Clark,
Sebastien Corde,
Thamine Dalichaouch,
Christopher E. Doss,
Claudio Emma,
Henrik Ekerfelt,
Elias Gerstmayr,
Spencer Gessner,
Claire Hansel,
Alexander Knetsch,
Valentina Lee,
Fei Li,
Mike Litos,
Brendan O'Shea,
Glen White
, et al. (4 additional authors not shown)
Abstract:
This study documents several correlations observed during the first run of the plasma wakefield acceleration experiment E300 conducted at FACET-II, using a single drive electron bunch. The established correlations include those between the measured maximum energy loss of the drive electron beam and the integrated betatron x-ray signal, the calculated total beam energy deposited in the plasma and t…
▽ More
This study documents several correlations observed during the first run of the plasma wakefield acceleration experiment E300 conducted at FACET-II, using a single drive electron bunch. The established correlations include those between the measured maximum energy loss of the drive electron beam and the integrated betatron x-ray signal, the calculated total beam energy deposited in the plasma and the integrated x-ray signal, among three visible light emission measuring cameras, and between the visible plasma light and x-ray signal. The integrated x-ray signal correlates almost linearly with both the maximum energy loss of the drive beam and the energy deposited into the plasma, demonstrating its usability as a measure of energy transfer from the drive beam to the plasma. Visible plasma light is found to be a useful indicator of the presence of wake at three locations that overall are two meters apart. Despite the complex dynamics and vastly different timescales, the x-ray radiation from the drive bunch and visible light emission from the plasma may prove to be effective non-invasive diagnostics for monitoring the energy transfer from the beam to the plasma in future high-repetition-rate experiments.
△ Less
Submitted 29 April, 2024;
originally announced April 2024.
-
Wavelength scaling and multi-color operation of a plasma driven attosecond X-ray source via harmonic generation
Authors:
Rafi Hessami,
Jenny Morgan,
River Robles,
Kirk A. Larsen,
Agostino Marinelli,
Claudio Emma
Abstract:
The generation of high power coherent soft X-ray pulses of sub-100 as duration and 10 nm wavelength using beams from a GeV energy plasma wakefield accelerator has been recently investigated in Ref. [arXiv:2011.07163]. As a future upgrade to this concept, this contribution investigates scaling to shorter X-ray wavelengths by cascading undulators tuned to higher harmonics of the fundamental. We pres…
▽ More
The generation of high power coherent soft X-ray pulses of sub-100 as duration and 10 nm wavelength using beams from a GeV energy plasma wakefield accelerator has been recently investigated in Ref. [arXiv:2011.07163]. As a future upgrade to this concept, this contribution investigates scaling to shorter X-ray wavelengths by cascading undulators tuned to higher harmonics of the fundamental. We present two simulation studies for plasma-driven attosecond harmonic generation schemes with final photon wavelengths of 2 nm and 0.40 nm. We demonstrate in these schemes that using undulators with retuned fundamental frequencies can produce GW-scale pulses of sub-nm radiation with tens of attosecond-scale pulse lengths, an order of magnitude shorter than current state-of-the-art attosecond XFELs. This multi-pulse multi-color operation will be broadly applicable to attosecond pump-probe experiments.
△ Less
Submitted 12 January, 2024;
originally announced January 2024.
-
Wakefield Generation in Hydrogen and Lithium Plasmas at FACET-II: Diagnostics and First Beam-Plasma Interaction Results
Authors:
D. Storey,
C. Zhang,
P. San Miguel Claveria,
G. J. Cao,
E. Adli,
L. Alsberg,
R. Ariniello,
C. Clarke,
S. Corde,
T. N. Dalichaouch,
H. Ekerfelt,
C. Emma,
E. Gerstmayr,
S. Gessner,
M. Gilljohann,
C. Hast,
A. Knetsch,
V. Lee,
M. Litos,
R. Loney,
K. A. Marsh,
A. Matheron,
W. B. Mori,
Z. Nie,
B. O'Shea
, et al. (6 additional authors not shown)
Abstract:
Plasma Wakefield Acceleration (PWFA) provides ultrahigh acceleration gradients of 10s of GeV/m, providing a novel path towards efficient, compact, TeV-scale linear colliders and high brightness free electron lasers. Critical to the success of these applications is demonstrating simultaneously high gradient acceleration, high energy transfer efficiency, and preservation of emittance, charge, and en…
▽ More
Plasma Wakefield Acceleration (PWFA) provides ultrahigh acceleration gradients of 10s of GeV/m, providing a novel path towards efficient, compact, TeV-scale linear colliders and high brightness free electron lasers. Critical to the success of these applications is demonstrating simultaneously high gradient acceleration, high energy transfer efficiency, and preservation of emittance, charge, and energy spread. Experiments at the FACET-II National User Facility at SLAC National Accelerator Laboratory aim to achieve all of these milestones in a single stage plasma wakefield accelerator, providing a 10 GeV energy gain in a <1 m plasma with high energy transfer efficiency. Such a demonstration depends critically on diagnostics able to measure emittance with mm-mrad accuracy, energy spectra to determine both %-level energy spread and broadband energy gain and loss, incoming longitudinal phase space, and matching dynamics. This paper discusses the experimental setup at FACET-II, including the incoming beam parameters from the FACET-II linac, plasma sources, and diagnostics developed to meet this challenge. Initial progress on the generation of beam ionized wakes in meter-scale hydrogen gas is discussed, as well as commissioning of the plasma sources and diagnostics.
△ Less
Submitted 9 October, 2023;
originally announced October 2023.
-
Generation of meter-scale hydrogen plasmas and efficient, pump-depletion-limited wakefield excitation using 10 GeV electron bunches
Authors:
C. Zhang,
D. Storey,
P. San Miguel Claveria,
Z. Nie,
K. A. Marsh,
M. Hogan,
W. B. Mori,
E. Adli,
W. An,
R. Ariniello,
G. J. Cao,
C. Clarke,
S. Corde,
T. Dalichaouch,
C. E. Doss,
C. Emma,
H. Ekerfelt,
E. Gerstmayr,
S. Gessner,
C. Hansel,
A. Knetsch,
V. Lee,
F. Li,
M. Litos,
B. O'Shea
, et al. (4 additional authors not shown)
Abstract:
High repetition rates and efficient energy transfer to the accelerating beam are important for a future linear collider based on the beam-driven plasma wakefield acceleration scheme (PWFA-LC). This paper reports the first results from the Plasma Wakefield Acceleration Collaboration (E300) that are beginning to address both of these issues using the recently commissioned FACET-II facility at SLAC.…
▽ More
High repetition rates and efficient energy transfer to the accelerating beam are important for a future linear collider based on the beam-driven plasma wakefield acceleration scheme (PWFA-LC). This paper reports the first results from the Plasma Wakefield Acceleration Collaboration (E300) that are beginning to address both of these issues using the recently commissioned FACET-II facility at SLAC. We have generated meter-scale hydrogen plasmas using time-structured 10 GeV electron bunches from FACET-II, which hold the promise of dramatically increasing the repetition rate of PWFA by rapidly replenishing the gas between each shot compared to the hitherto used lithium plasmas that operate at 1-10 Hz. Furthermore, we have excited wakes in such plasmas that are suitable for high gradient particle acceleration with high drive-bunch to wake energy transfer efficiency -- a first step in achieving a high overall energy transfer efficiency. We have done this by using time-structured electron drive bunches that typically have one or more ultra-high current (>30 kA) femtosecond spike(s) superimposed on a longer (~0.4 ps) lower current (<10 kA) bunch structure. The first spike effectively field-ionizes the gas and produces a meter-scale (30-160 cm) plasma, whereas the subsequent beam charge creates a wake. The length and amplitude of the wake depends on the longitudinal current profile of the bunch and plasma density. We find that the onset of pump depletion, when some of the drive beam electrons are nearly fully depleted of their energy, occurs for hydrogen pressure >1.5 Torr. We also show that some electrons in the rear of the bunch can gain several GeV energies from the wake. These results are reproduced by particle-in-cell simulations using the QPAD code. At a pressure of ~2 Torr, simulations results and experimental data show that the beam transfers about 60% of its energy to the wake.
△ Less
Submitted 9 October, 2023;
originally announced October 2023.
-
XCC: An X-ray FEL-based $γγ$ Compton Collider Higgs Factory
Authors:
T. Barklow,
C. Emma,
Z. Huang,
A. Naji,
E. Nanni,
A. Schwartzman,
S. Tantawi,
G. White
Abstract:
This report describes the conceptual design of a $γγ$ Higgs factory in which 62.8 GeV electron beams collide with 1 keV X-ray free electron laser (XFEL) beams to produce colliding beams of 62.5 GeV photons. The Higgs boson production rate is 80,000 Higgs bosons per 10$^7$ second year, roughly the same as the ILC Higgs rate at $\sqrt{s}$=250 GeV. The electron accelerator is based on cold copper dis…
▽ More
This report describes the conceptual design of a $γγ$ Higgs factory in which 62.8 GeV electron beams collide with 1 keV X-ray free electron laser (XFEL) beams to produce colliding beams of 62.5 GeV photons. The Higgs boson production rate is 80,000 Higgs bosons per 10$^7$ second year, roughly the same as the ILC Higgs rate at $\sqrt{s}$=250 GeV. The electron accelerator is based on cold copper distributed coupling (C$^3$) accelerator technology. Unlike the center-of-mass energy spectra of previous optical wavelength $γγ$ collider designs, the sharply peaked $γγ$ center-of-mass energy spectrum of XCC produces model independent Higgs coupling measurements with precision on par with $e^+e^-$ colliders. For the triple Higgs coupling measurement, the XCC center-of-mass energy can be upgraded to 380 GeV, where the cross section for $γγ\rightarrow HH$ is twice that of $e^+e^- \rightarrow ZHH$ at $\sqrt{s}$=500 GeV. Design challenges are discussed, along with the R\&D to address them, including demonstrators.
△ Less
Submitted 11 July, 2023; v1 submitted 14 June, 2023;
originally announced June 2023.
-
Multipoint-BAX: A New Approach for Efficiently Tuning Particle Accelerator Emittance via Virtual Objectives
Authors:
Sara A. Miskovich,
Willie Neiswanger,
William Colocho,
Claudio Emma,
Jacqueline Garrahan,
Timothy Maxwell,
Christopher Mayes,
Stefano Ermon,
Auralee Edelen,
Daniel Ratner
Abstract:
Although beam emittance is critical for the performance of high-brightness accelerators, optimization is often time limited as emittance calculations, commonly done via quadrupole scans, are typically slow. Such calculations are a type of $\textit{multipoint query}$, i.e. each query requires multiple secondary measurements. Traditional black-box optimizers such as Bayesian optimization are slow an…
▽ More
Although beam emittance is critical for the performance of high-brightness accelerators, optimization is often time limited as emittance calculations, commonly done via quadrupole scans, are typically slow. Such calculations are a type of $\textit{multipoint query}$, i.e. each query requires multiple secondary measurements. Traditional black-box optimizers such as Bayesian optimization are slow and inefficient when dealing with such objectives as they must acquire the full series of measurements, but return only the emittance, with each query. We propose a new information-theoretic algorithm, Multipoint-BAX, for black-box optimization on multipoint queries, which queries and models individual beam-size measurements using techniques from Bayesian Algorithm Execution (BAX). Our method avoids the slow multipoint query on the accelerator by acquiring points through a $\textit{virtual objective}$, i.e. calculating the emittance objective from a fast learned model rather than directly from the accelerator. We use Multipoint-BAX to minimize emittance at the Linac Coherent Light Source (LCLS) and the Facility for Advanced Accelerator Experimental Tests II (FACET-II). In simulation, our method is 20$\times$ faster and more robust to noise compared to existing methods. In live tests, it matched the hand-tuned emittance at FACET-II and achieved a 24% lower emittance than hand-tuning at LCLS. Our method represents a conceptual shift for optimizing multipoint queries, and we anticipate that it can be readily adapted to similar problems in particle accelerators and other scientific instruments.
△ Less
Submitted 19 December, 2023; v1 submitted 10 September, 2022;
originally announced September 2022.
-
Snowmass 2021 Accelerator Frontier White Paper: Near Term Applications driven by Advanced Accelerator Concepts
Authors:
Claudio Emma,
Jeroen van Tilborg,
Félicie Albert,
Luca Labate,
Joel England,
Spencer Gessner,
Frederico Fiuza,
Lieselotte Obst-Huebl,
Alexander Zholents,
Alex Murokh,
James Rosenzweig
Abstract:
While the long-term vision of the advanced accelerator community is aimed at addressing the challenges of future collider technology, it is critical that the community takes advantage of the opportunity to make large societal impact through its near-term applications. In turn, enabling robust applications strengthens the quality, control, and reliability of the underlying accelerator infrastructur…
▽ More
While the long-term vision of the advanced accelerator community is aimed at addressing the challenges of future collider technology, it is critical that the community takes advantage of the opportunity to make large societal impact through its near-term applications. In turn, enabling robust applications strengthens the quality, control, and reliability of the underlying accelerator infrastructure. The white paper contributions that are solicited here will summarize the near-term applications ideas presented by the advanced accelerator community, assessing their potential impact, discussing scientific and technical readiness of concepts, and providing a timeline for implementation.
△ Less
Submitted 17 March, 2022;
originally announced March 2022.
-
C$^3$ Demonstration Research and Development Plan
Authors:
Emilio A. Nanni,
Martin Breidenbach,
Caterina Vernieri,
Sergey Belomestnykh,
Pushpalatha Bhat,
Sergei Nagaitsev,
Mei Bai,
William Berg,
Tim Barklow,
John Byrd,
Ankur Dhar,
Ram C. Dhuley,
Chris Doss,
Joseph Duris,
Auralee Edelen,
Claudio Emma,
Josef Frisch,
Annika Gabriel,
Spencer Gessner,
Carsten Hast,
Chunguang Jing,
Arkadiy Klebaner,
Anatoly K. Krasnykh,
John Lewellen,
Matthias Liepe
, et al. (25 additional authors not shown)
Abstract:
C$^3$ is an opportunity to realize an e$^+$e$^-$ collider for the study of the Higgs boson at $\sqrt{s} = 250$ GeV, with a well defined upgrade path to 550 GeV while staying on the same short facility footprint. C$^3$ is based on a fundamentally new approach to normal conducting linear accelerators that achieves both high gradient and high efficiency at relatively low cost. Given the advanced stat…
▽ More
C$^3$ is an opportunity to realize an e$^+$e$^-$ collider for the study of the Higgs boson at $\sqrt{s} = 250$ GeV, with a well defined upgrade path to 550 GeV while staying on the same short facility footprint. C$^3$ is based on a fundamentally new approach to normal conducting linear accelerators that achieves both high gradient and high efficiency at relatively low cost. Given the advanced state of linear collider designs, the key system that requires technical maturation for C$^3$ is the main linac. This white paper presents the staged approach towards a facility to demonstrate C$^3$ technology with both Direct (source and main linac) and Parallel (beam delivery, damping ring, ancillary component) R&D. The white paper also includes discussion on the approach for technology industrialization, related HEP R&D activities that are enabled by C$^3$ R&D, infrastructure requirements and siting options.
△ Less
Submitted 6 July, 2022; v1 submitted 17 March, 2022;
originally announced March 2022.
-
XCC: An X-ray FEL-based $γγ$ Collider Higgs Factory
Authors:
Tim Barklow,
Su Dong,
Claudio Emma,
Joseph Duris,
Zhirong Huang,
Adham Naji,
Emilio Nanni,
James Rosenzweig,
Anne Sakdinawat,
Sami Tantawi,
Glen White
Abstract:
This report describes the design of a $γγ$ Higgs factory in which 62.8 GeV electron beams collide with 1 keV X-ray free electron laser (XFEL) beams to produce colliding beams of 62.5 GeV photons. The Higgs boson production rate is 34,000 Higgs bosons per $10^7$ second year, roughly the same as the ILC Higgs rate. The electron accelerator is based on cold copper distributed coupling (C$^3$) acceler…
▽ More
This report describes the design of a $γγ$ Higgs factory in which 62.8 GeV electron beams collide with 1 keV X-ray free electron laser (XFEL) beams to produce colliding beams of 62.5 GeV photons. The Higgs boson production rate is 34,000 Higgs bosons per $10^7$ second year, roughly the same as the ILC Higgs rate. The electron accelerator is based on cold copper distributed coupling (C$^3$) accelerator technology. The 0.7 J pulse energy of the XFEL represents a 300-fold increase over the pulse energy of current soft x-ray FEL's. Design challenges are discussed, along with the R\&D to address them, including demonstrators.
△ Less
Submitted 11 May, 2022; v1 submitted 16 March, 2022;
originally announced March 2022.
-
Spatiotemporal dynamics of ultrarelativistic beam-plasma instabilities
Authors:
P. San Miguel Claveria,
X. Davoine,
J. R. Peterson,
M. Gilljohann,
I. Andriyash,
R. Ariniello,
H. Ekerfelt,
C. Emma,
J. Faure,
S. Gessner,
M. Hogan,
C. Joshi,
C. H. Keitel,
A. Knetsch,
O. Kononenko,
M. Litos,
Y. Mankovska,
K. Marsh,
A. Matheron,
Z. Nie,
B. O'Shea,
D. Storey,
N. Vafaei-Najafabadi,
Y. Wu,
X. Xu
, et al. (6 additional authors not shown)
Abstract:
An electron or electron-positron beam streaming through a plasma is notoriously prone to micro-instabilities. For a dilute ultrarelativistic infinite beam, the dominant instability is a mixed mode between longitudinal two-stream and transverse filamentation modes, with a phase velocity oblique to the beam velocity. A spatiotemporal theory describing the linear growth of this oblique mixed instabil…
▽ More
An electron or electron-positron beam streaming through a plasma is notoriously prone to micro-instabilities. For a dilute ultrarelativistic infinite beam, the dominant instability is a mixed mode between longitudinal two-stream and transverse filamentation modes, with a phase velocity oblique to the beam velocity. A spatiotemporal theory describing the linear growth of this oblique mixed instability is proposed, which predicts that spatiotemporal effects generally prevail for finite-length beams, leading to a significantly slower instability evolution than in the usually assumed purely temporal regime. These results are accurately supported by particle-in-cell (PIC) simulations. Furthermore, we show that the self-focusing dynamics caused by the plasma wakefields driven by finite-width beams can compete with the oblique instability. Analyzed through PIC simulations, the interplay of these two processes in realistic systems bears important implications for upcoming accelerator experiments on ultrarelativistic beam-plasma interactions.
△ Less
Submitted 3 May, 2022; v1 submitted 22 June, 2021;
originally announced June 2021.
-
Terawatt attosecond X-ray source driven by a plasma accelerator
Authors:
Claudio Emma,
Xinlu Xu,
Andrew Fisher,
James P. MacArthur,
James Cryan,
Mark J. Hogan,
Pietro Musumeci,
Glen White,
Agostino Marinelli
Abstract:
Plasma accelerators can generate ultra high brightness electron beams which open the door to light sources with smaller physical footprint and properties un-achievable with conventional accelerator technology. In this paper we show that electron beams from Plasma WakeField Accelerators (PWFAs) can generate few-cycle coherent tunable soft X-ray pulses with TW peak power and a duration of tens of at…
▽ More
Plasma accelerators can generate ultra high brightness electron beams which open the door to light sources with smaller physical footprint and properties un-achievable with conventional accelerator technology. In this paper we show that electron beams from Plasma WakeField Accelerators (PWFAs) can generate few-cycle coherent tunable soft X-ray pulses with TW peak power and a duration of tens of attoseconds, an order of magnitude more powerful, shorter and with better stability than state-of-the-art X-ray Free Electron Lasers (XFELs). Such a light source would significantly enhance the ability to experimentally investigate electron dynamics on ultrafast timescales, having broad-ranging impact across multiple scientific fields. Rather than starting from noise as in typical XFELs, the X-rays emission in this approach is driven by coherent radiation from a pre-bunched, near Mega Ampere (MA) current electron beam of attosecond duration. This relaxes the restrictive tolerances which have hindered progress towards utilizing plasma accelerators as coherent X-ray drivers thus far, presenting a new paradigm for advanced-accelerator light source applications.
△ Less
Submitted 9 August, 2021; v1 submitted 13 November, 2020;
originally announced November 2020.
-
Accurate and confident prediction of electron beam longitudinal properties using spectral virtual diagnostics
Authors:
A. Hanuka,
C. Emma,
T. Maxwell,
A. Fisher,
B. Jacobson,
M. J. Hogan,
Z. Huang
Abstract:
Longitudinal phase space (LPS) provides a critical information about electron beam dynamics for various scientific applications. For example, it can give insight into the high-brightness X-ray radiation from a free electron laser. Existing diagnostics are invasive, and often times cannot operate at the required resolution. In this work we present a machine learning-based Virtual Diagnostic (VD) to…
▽ More
Longitudinal phase space (LPS) provides a critical information about electron beam dynamics for various scientific applications. For example, it can give insight into the high-brightness X-ray radiation from a free electron laser. Existing diagnostics are invasive, and often times cannot operate at the required resolution. In this work we present a machine learning-based Virtual Diagnostic (VD) tool to accurately predict the LPS for every shot using spectral information collected non-destructively from the radiation of relativistic electron beam. We demonstrate the tool's accuracy for three different case studies with experimental or simulated data. For each case, we introduce a method to increase the confidence in the VD tool. We anticipate that spectral VD would improve the setup and understanding of experimental configurations at DOE's user facilities as well as data sorting and analysis. The spectral VD can provide confident knowledge of the longitudinal bunch properties at the next generation of high-repetition rate linear accelerators while reducing the load on data storage, readout and streaming requirements.
△ Less
Submitted 27 September, 2020;
originally announced September 2020.
-
Extremely Dense Gamma-Ray Pulses in Electron Beam-Multifoil Collisions
Authors:
Archana Sampath,
Xavier Davoine,
Sébastien Corde,
Laurent Gremillet,
Max Gilljohann,
Maitreyi Sangal,
Christoph H. Keitel,
Robert Ariniello,
John Cary,
Henrik Ekerfelt,
Claudio Emma,
Frederico Fiuza,
Hiroki Fujii,
Mark Hogan,
Chan Joshi,
Alexander Knetsch,
Olena Kononenko,
Valentina Lee,
Mike Litos,
Kenneth Marsh,
Zan Nie,
Brendan O'Shea,
J. Ryan Peterson,
Pablo San Miguel Claveria,
Doug Storey
, et al. (4 additional authors not shown)
Abstract:
Sources of high-energy photons have important applications in almost all areas of research. However, the photon flux and intensity of existing sources is strongly limited for photon energies above a few hundred keV. Here we show that a high-current ultrarelativistic electron beam interacting with multiple submicrometer-thick conducting foils can undergo strong self-focusing accompanied by efficien…
▽ More
Sources of high-energy photons have important applications in almost all areas of research. However, the photon flux and intensity of existing sources is strongly limited for photon energies above a few hundred keV. Here we show that a high-current ultrarelativistic electron beam interacting with multiple submicrometer-thick conducting foils can undergo strong self-focusing accompanied by efficient emission of gamma-ray synchrotron photons. Physically, self-focusing and high-energy photon emission originate from the beam interaction with the near-field transition radiation accompanying the beam-foil collision. This near field radiation is of amplitude comparable with the beam self-field, and can be strong enough that a single emitted photon can carry away a significant fraction of the emitting electron energy. After beam collision with multiple foils, femtosecond collimated electron and photon beams with number density exceeding that of a solid are obtained. The relative simplicity, unique properties, and high efficiency of this gamma-ray source open up new opportunities for both applied and fundamental research including laserless investigations of strong-field QED processes with a single electron beam.
△ Less
Submitted 12 February, 2021; v1 submitted 3 September, 2020;
originally announced September 2020.
-
An Ultra-Compact X-Ray Free-Electron Laser
Authors:
J. B. Rosenzweig,
N. Majernik,
R. R. Robles,
G. Andonian,
O. Camacho,
A. Fukasawa,
A. Kogar,
G. Lawler,
Jianwei Miao,
P. Musumeci,
B. Naranjo,
Y. Sakai,
R. Candler,
B. Pound,
C. Pellegrini,
C. Emma,
A. Halavanau,
J. Hastings,
Z. Li,
M. Nasr,
S. Tantawi,
P. Anisimov,
B. Carlsten,
F. Krawczyk,
E. Simakov
, et al. (11 additional authors not shown)
Abstract:
In the field of beam physics, two frontier topics have taken center stage due to their potential to enable new approaches to discovery in a wide swath of science. These areas are: advanced, high gradient acceleration techniques, and x-ray free electron lasers (XFELs). Further, there is intense interest in the marriage of these two fields, with the goal of producing a very compact XFEL. In this con…
▽ More
In the field of beam physics, two frontier topics have taken center stage due to their potential to enable new approaches to discovery in a wide swath of science. These areas are: advanced, high gradient acceleration techniques, and x-ray free electron lasers (XFELs). Further, there is intense interest in the marriage of these two fields, with the goal of producing a very compact XFEL. In this context, recent advances in high gradient radio-frequency cryogenic copper structure research have opened the door to the use of surface electric fields between 250 and 500 MV/m. Such an approach is foreseen to enable a new generation of photoinjectors with six-dimensional beam brightness beyond the current state-of-the-art by well over an order of magnitude. This advance is an essential ingredient enabling an ultra-compact XFEL (UC-XFEL). In addition, one may accelerate these bright beams to GeV scale in less than 10 meters. Such an injector, when combined with inverse free electron laser-based bunching techniques can produce multi-kA beams with unprecedented beam quality, quantified by ~50 nm-rad normalized emittances. These beams, when injected into innovative, short-period (1-10 mm) undulators uniquely enable UC-XFELs having footprints consistent with university-scale laboratories. We describe the architecture and predicted performance of this novel light source, which promises photon production per pulse of a few percent of existing XFEL sources. We review implementation issues including collective beam effects, compact x-ray optics systems, and other relevant technical challenges. To illustrate the potential of such a light source to fundamentally change the current paradigm of XFELs with their limited access, we examine possible applications in biology, chemistry, materials, atomic physics, industry, and medicine which may profit from this new model of performing XFEL science.
△ Less
Submitted 14 August, 2020; v1 submitted 12 March, 2020;
originally announced March 2020.
-
Advanced Control Methods for Particle Accelerators (ACM4PA) 2019 Workshop Report
Authors:
Alexander Scheinker,
Claudio Emma,
Auralee L. Edelen,
Spencer Gessner
Abstract:
Los Alamos is currently developing novel particle accelerator controls and diagnostics algorithms to enable higher quality beams with lower beam losses than is currently possible. The purpose of this workshop was to consider tuning and optimization challenges of a wide range of particle accelerators including linear proton accelerators such as the Los Alamos Neutron Science Center (LANSCE), rings…
▽ More
Los Alamos is currently developing novel particle accelerator controls and diagnostics algorithms to enable higher quality beams with lower beam losses than is currently possible. The purpose of this workshop was to consider tuning and optimization challenges of a wide range of particle accelerators including linear proton accelerators such as the Los Alamos Neutron Science Center (LANSCE), rings such as the Advanced Photon Source (APS) synchrotron, free electron lasers (FEL) such as the Linac Coherent Light Source (LCLS) and LCLS-II, the European X-ray Free Electron Laser (EuXFEL), the Swiss FEL, and the planned MaRIE FEL, and plasma wake-field accelerators such as FACET, FACET-II, and AWAKE at CERN. One major challenge is an the ability to quickly create very high quality, extremely intense, custom current and energy profile beams while working with limited real time non-invasive diagnostics and utilizing time-varying uncertain initial beam distributions and accelerator components. Currently, a few individual accelerator labs have been developing and applying their own diagnostics tools and custom control and ML algorithms for automated machine tuning and optimization. The goal of this workshop was to bring together a group of accelerator physicists and accelerator related control and ML experts in order to define which controls and diagnostics would be most useful for existing and future accelerators and to create a plan for developing a new family of algorithms that can be shared and maintained by the community.
△ Less
Submitted 15 January, 2020;
originally announced January 2020.
-
Very high brightness and power LCLS-II hard X-ray pulses
Authors:
Aliaksei Halavanau,
Franz-Josef Decker,
Claudio Emma,
Jackson Sheppard,
Claudio Pellegrini
Abstract:
We show the feasibility of generating X-ray pulses in the 4 to 8 keV fundamental photon energy range with 0.65 TW peak power, 15 fs pulse duration, $9\times10^{-5}$ bandwidth, using the LCLS-II copper linac and hard X-ray (HXR) undulator. Third harmonic pulses with 8-12 GW peak power and narrow bandwidth are also generated. High power and small bandwidth X-rays are obtained using two electron bunc…
▽ More
We show the feasibility of generating X-ray pulses in the 4 to 8 keV fundamental photon energy range with 0.65 TW peak power, 15 fs pulse duration, $9\times10^{-5}$ bandwidth, using the LCLS-II copper linac and hard X-ray (HXR) undulator. Third harmonic pulses with 8-12 GW peak power and narrow bandwidth are also generated. High power and small bandwidth X-rays are obtained using two electron bunches separated by about 1 ns, one to generate a high power seed signal, the other to amplify it by tapering the magnetic field of the HXR undulator. The bunch delay is compensated by delaying the seed pulse with a four crystals monochromator. The high power seed leads to higher output power and better spectral properties, with $>$94\% of the X-ray power being within the near transform limited bandwidth. We discuss some of the experiments made possible by X-ray pulses with these characteristics, like single particle imaging and high field physics.
△ Less
Submitted 19 February, 2019; v1 submitted 11 December, 2018;
originally announced December 2018.
-
Superradiant and stimulated-superradiant emission of bunched electron beams
Authors:
Avraham Gover,
Reuven Ianconescu,
Aharon Friedman,
Claudio Emma,
Nick Sudar,
Pietro Musumeci,
Claudio Pellegrini
Abstract:
We outline the fundamental coherent radiation emission processes from a bunched charged particles beam. In contrast to spontaneous emission of radiation from a random electron beam that is proportional to the number of particles, a pre-bunched electron beam can emit spontaneously coherent radiation proportional to the number of particles - squared, through the process of (spontaneous) superradianc…
▽ More
We outline the fundamental coherent radiation emission processes from a bunched charged particles beam. In contrast to spontaneous emission of radiation from a random electron beam that is proportional to the number of particles, a pre-bunched electron beam can emit spontaneously coherent radiation proportional to the number of particles - squared, through the process of (spontaneous) superradiance (SP-SR) (in the sense of Dicke's). The coherent SP-SR emission of a bunched electron beam can be even further enhanced by a process of stimulated-superradiance (ST-SR) in the presence of a seed injected radiation field. In this review, these coherent radiation emission processes for both single bunch and periodically bunched beams are considered in a model of radiation mode expansion.
The general model of coherent spontaneous emission is extended to the nonlinear regime, particularly for undulator (wiggler) interaction: Tapering-Enhanced Stimulated Superradiant Amplification (TESSA).
Processes of SP-SR and TESSA take place in tapered wiggler seed-injected FELs. In such FELs, operating in the X-Ray regime, these processes are convoluted with other effects. However these fundamental emission concepts are useful guidelines for the strategy of wiggler tapering efficiency and power enhancement.
Based on this model, we review previous theories and experiments on coherent radiation sources based on SP-SR (coherent undulator radiation, synchrotron radiation, Smith-Purcell radiation etc.), in the THz regime and on-going works on tapered wiggler efficiency-enhancement concepts in all optical frequency regimes up to X-Rays.
△ Less
Submitted 23 April, 2019; v1 submitted 17 October, 2018;
originally announced October 2018.
-
Ultra-High Brightness Electron Beams from Very-High Field Cryogenic Radio-frequency Photocathode Sources
Authors:
J. B. Rosenzweig,
A. Cahill,
B. Carlsten,
G. Castorina,
M. Croia,
C. Emma,
A. Fukusawa,
B. Spataro,
D. Alesini,
V. Dolgashev,
M. Ferrario,
G. Lawler,
R. Li,
C. Limborg,
J. Maxson,
P. Musumeci,
R. Pompili,
S. Tantawi,
O. Williams
Abstract:
Recent investigations of RF copper structures operated at cryogenic temperatures performed by a SLAC-UCLA collaboration have shown a dramatic increase in the maximum surface electric field, to 500 MV/m. We examine use of these fields to enable very high field cryogenic photoinjectors that can attain over an order of magnitude increase in peak electron beam brightness. We present beam dynamics stud…
▽ More
Recent investigations of RF copper structures operated at cryogenic temperatures performed by a SLAC-UCLA collaboration have shown a dramatic increase in the maximum surface electric field, to 500 MV/m. We examine use of these fields to enable very high field cryogenic photoinjectors that can attain over an order of magnitude increase in peak electron beam brightness. We present beam dynamics studies relevant to X-ray FEL injectors, using start-to-end simulations that show the high brightness and low emittance of this source enables operation of a compact FEL reaching a photon energy of 80 keV. The preservation of beam brightness in compression, exploiting micro-bunching techniques is discussed. While the gain in brightness at high field is due to increase of the emission current density, further increases in brightness due to lowering of the intrinsic cathode emittance in cryogenic operation are also enabled. While the original proposal for this type of cryogenic, ultra-high field photoinjector has emphasized S-band designs, there are numerous potential advantages that may be conferred by operation in C-band. We examine issues related to experimental implementation in C-band, and expected performance of this type of device in a future hard X-ray FEL such as MaRIE.
△ Less
Submitted 20 January, 2018;
originally announced January 2018.
-
Next Generation High Brightness Electron Beams From Ultra-High Field Cryogenic Radiofrequency Photocathode Sources
Authors:
J. B. Rosenzweig,
A. Cahill,
V. Dolgashev,
C. Emma,
A. Fukusawa,
R. Li,
C. Limborg,
J. Maxson,
P. Musumeci,
A. Nause,
R. Pakter,
R. Pompili,
R. Roussel,
B. Spataro,
S. Tantawi
Abstract:
Recent studies of the performance of radio-frequency (RF) copper cavities operated at cryogenic temperatures have shown a dramatic increase in the maximum achievable surface electric field. We propose to exploit this development to enable a new generation of photoinjectors operated at cryogenic temperatures that may attain, through enhancement of the launch field at the photocathode, a significant…
▽ More
Recent studies of the performance of radio-frequency (RF) copper cavities operated at cryogenic temperatures have shown a dramatic increase in the maximum achievable surface electric field. We propose to exploit this development to enable a new generation of photoinjectors operated at cryogenic temperatures that may attain, through enhancement of the launch field at the photocathode, a significant increase in five-dimensional electron beam brightness. We present detailed studies of the beam dynamics associated with such a system, by examining an S-band photoinjector operated at 250 MV/m peak electric field that reaches normalized emittances in the 40 nm-rad range at charges (100-200 pC) suitable for use in a hard X-ray free-electron laser (XFEL) scenario based on the LCLS. In this case, we show by start-to-end simulations that the properties of this source may give rise to high efficiency operation of an XFEL, and permit extension of the photon energy reach by an order of magnitude, to over 80 keV. The brightness needed for such XFELs is achieved through low source emittances in tandem with high current after compression. In the XFEL examples analyzed, the emittances during final compression are preserved using micro-bunching techniques. Extreme low emittance scenarios obtained at pC charge, appropriate for significantly extending temporal resolution limits of ultrafast electron diffraction and microscopy experiments, are also reviewed. While the increase in brightness in a cryogenic photoinjector is mainly due to the augmentation of the emission current density via field enhancement, further possible increases in performance arising from lowering the intrinsic cathode emittance in cryogenic operation are also analyzed. Issues in experimental implementation, including cavity optimization for lowering cryogenic thermal dissipation, external coupling, and cryo-cooler system are discussed.
△ Less
Submitted 30 December, 2018; v1 submitted 4 March, 2016;
originally announced March 2016.
-
High Efficiency, Multi-Terawatt X-ray free electron lasers
Authors:
Claudio Emma,
Kun Fang,
Juhao Wu,
Claudio Pellegrini
Abstract:
We study high efficiency, multi-terawatt peak power, few angstrom wavelength, X-ray Free Electron Lasers (X-ray FELs). To obtain these characteristics we consider an optimized undulator design: superconducting, helical, with short period and built-in strong focusing. This design reduces the length of the breaks between modules, decreasing diffraction effects, and allows using a stronger transverse…
▽ More
We study high efficiency, multi-terawatt peak power, few angstrom wavelength, X-ray Free Electron Lasers (X-ray FELs). To obtain these characteristics we consider an optimized undulator design: superconducting, helical, with short period and built-in strong focusing. This design reduces the length of the breaks between modules, decreasing diffraction effects, and allows using a stronger transverse electron focusing. Both effects reduce the gain length and the overall undulator length. The peak power and efficiency depend on the transverse electron beam distribution and on time dependent effects, like synchrotron sideband growth. The last effect is identified as the main cause for reduction of electron beam microbunching and FEL peak power. We show that the optimal functional form for the undulator magnetic field tapering profile, yielding the maximum output power, depends significantly on these effects. The output power achieved when neglecting time dependent effects for an LCLS-like X-ray FEL with a 100 m long tapered undulator is 7.3 TW, a 14 $\%$ electron beam energy extraction efficiency. When these effects are included the highest peak power is achieved reducing the tapering rate, thus minimizing the reduction in electron micro-bunching due to synchrotron sideband growth. The maximum efficiency obtained for this case is 9 $\%$, corresponding to 4.7 TW peak radiation power. Possible methods to suppress the synchrotron sidebands, and further enhance the FEL peak power, up to about 6 TW by increasing the seed power, are discussed.
△ Less
Submitted 19 August, 2015;
originally announced August 2015.
-
Tapering studies for Terawatt level X-ray FELs with a superconducting undulator
Authors:
Claudio Emma,
Juhao Wu,
Paul Emma,
Zhirong Huang,
Claudio Pellegrini
Abstract:
We study the tapering optimization scheme for a short period, less than two cm, superconducting undulator, and show that it can generate 4 keV X-ray pulses with peak power in excess of 1 terawatt, using LCLS electron beam parameters. We study the effect of undulator module length relative to the FEL gain length for continous and step-wise taper profiles. For the optimal section length of 1.5m we s…
▽ More
We study the tapering optimization scheme for a short period, less than two cm, superconducting undulator, and show that it can generate 4 keV X-ray pulses with peak power in excess of 1 terawatt, using LCLS electron beam parameters. We study the effect of undulator module length relative to the FEL gain length for continous and step-wise taper profiles. For the optimal section length of 1.5m we study the evolution of the FEL process for two different superconducting technologies NbTi and Nb3Sn. We discuss the major factors limiting the maximum output power, particle detrapping around the saturation location and time dependent detrapping due to generation and amplification of sideband modes.
△ Less
Submitted 23 January, 2015;
originally announced January 2015.
-
Transverse pulse shaping and optimization of a tapered hard X-ray free electron laser
Authors:
Claudio Emma,
Claudio Pellegrini,
Juhao Wu
Abstract:
Multidimensional optimization schemes for TW hard X-Ray free electron lasers are applied to the cases of transversely uniform and parabolic electron beam distributions and compared to examples of transversely Gaussian beams. The optimizations are performed for a $200$m undulator and a resonant wavelength of $λ_r=1.5Å$ using the fully 3-dimensional FEL particle code GENESIS. Time dependent simulati…
▽ More
Multidimensional optimization schemes for TW hard X-Ray free electron lasers are applied to the cases of transversely uniform and parabolic electron beam distributions and compared to examples of transversely Gaussian beams. The optimizations are performed for a $200$m undulator and a resonant wavelength of $λ_r=1.5Å$ using the fully 3-dimensional FEL particle code GENESIS. Time dependent simulations showed that the maximum radiation power is larger for flatter transverse distributions due to enhanced optical guiding in the tapered section of the undulator. For a transversely Gaussian beam the maximum output power was found to be $\text{P}_{max}$=$1.56$ TW compared to $2.26$ TW for the parabolic case and $2.63$ TW for the uniform case. Spectral data also showed a 30-70$\%$ reduction in energy deposited in the sidebands for the uniform and parabolic beams compared with a Gaussian. An analysis of the maximum power as a function of detuning from resonance shows that redshifting the central wavelength by $Δλ/ λ<ρ$ increases the power for all three transverse electron distributions.
△ Less
Submitted 20 March, 2014;
originally announced March 2014.