-
Programmable thermocapillary shaping of thin liquid films
Authors:
Ran Eshel,
Valeri Frumkin,
Matan Nice,
Omer Luria,
Boris Ferdman,
Nadav Opatovski,
Khaled Gommed,
Maxim Shusteff,
Yoav Shechtman,
Moran Bercovici
Abstract:
We present a method that leverages projected light patterns as a mechanism for freeform deformations of a thin liquid film via the thermocapillary effect. We developed a closed-form solution for the inverse problem of the thin-film evolution equation, allowing to obtain the projection pattern required in order to achieve a desired topography. We experimentally implement the method using a computer…
▽ More
We present a method that leverages projected light patterns as a mechanism for freeform deformations of a thin liquid film via the thermocapillary effect. We developed a closed-form solution for the inverse problem of the thin-film evolution equation, allowing to obtain the projection pattern required in order to achieve a desired topography. We experimentally implement the method using a computer controlled light projector, which illuminates any desired pattern onto the bottom of a fluidic chamber patterned with heat absorbing metal pads. The resulting heat map induces surface tension gradients in the liquid-air interface, giving rise to thermocapillary flow that deforms the liquid surface. If a polymer is used for the liquid film, it can then be photocured to yield a solid device. Based on the inverse problem solutions and using this system, we demonstrate the fabrication of several diffractive optical elements (DOEs), including phase masks for extended depth of field imaging, and for 3D localization microscopy. The entire process, from projection to solidification, is completed in less than five minutes, and yields a sub-nanometric surface quality without any post-processing.
△ Less
Submitted 2 May, 2022; v1 submitted 31 August, 2021;
originally announced September 2021.
-
Revisiting, resolving and unifying the nanochannel-microchannel electrical resistance paradigm
Authors:
Yoav Green,
Ramadan Abu-Rjal,
Ran Eshel
Abstract:
Until recently, the accepted paradigm was that the Ohmic electrical response of nanochannel-microchannel systems is determined solely by the nanochannel while the effects of the adjacent microchannels are negligible. Two, almost identical, models were suggested to rationalize experimental observations that appeared to confirm the paradigm. However, recent works have challenged this paradigm and sh…
▽ More
Until recently, the accepted paradigm was that the Ohmic electrical response of nanochannel-microchannel systems is determined solely by the nanochannel while the effects of the adjacent microchannels are negligible. Two, almost identical, models were suggested to rationalize experimental observations that appeared to confirm the paradigm. However, recent works have challenged this paradigm and shown that the microchannels contribute in a non-negligible manner, and thus these two models are inadequate in describing realistic nanochannel-microchannel systems. Two newer nanochannel-microchannel models were suggested to replace the nanochannel-dominant models. These models were limited to either very low or very high concentrations. Here, we review these four leading models. The most popular is shown to be incorrect, while the remaining models are unified under a newly derived solution which shows remarkable correspondence to simulations and experiments. The unifying model can be used to improve the design of any nanofluidic based systems as the physics are more transparent, and the need for complicated time-consuming preliminary simulations and experiments has been eliminated.
△ Less
Submitted 13 October, 2019;
originally announced October 2019.
-
Non-uniform electro-osmotic flow drives fluid-structure instability
Authors:
Evgeniy Boyko,
Ran Eshel,
Amir D. Gat,
Moran Bercovici
Abstract:
We demonstrate the existence of a fluid-structure instability arising from the interaction of electro-osmotic flow with an elastic substrate. Considering the case of flow within a soft fluidic chamber, we show that above a certain electric field threshold, negative gauge pressure induced by electro-osmotic flow causes the collapse of its elastic walls. We combine experiments and theoretical analys…
▽ More
We demonstrate the existence of a fluid-structure instability arising from the interaction of electro-osmotic flow with an elastic substrate. Considering the case of flow within a soft fluidic chamber, we show that above a certain electric field threshold, negative gauge pressure induced by electro-osmotic flow causes the collapse of its elastic walls. We combine experiments and theoretical analysis to elucidate the underlying mechanism for instability and identify several distinct dynamic regimes. The understanding of this instability is important for the design of electrokinetic systems containing soft elements.
△ Less
Submitted 24 June, 2019;
originally announced June 2019.
-
Elastohydrodynamics of a pre-stretched finite elastic sheet lubricated by a thin viscous film with application to microfluidic soft actuators
Authors:
Evgeniy Boyko,
Ran Eshel,
Khaled Gommed,
Amir D. Gat,
Moran Bercovici
Abstract:
The interaction of a thin viscous film with an elastic sheet results in coupling of pressure and deformation, which can be utilized as an actuation mechanism for surface deformations in a wide range of applications, including microfluidics, optics, and soft robotics. Implementation of such configurations inherently takes place over finite domains and often requires some pre-stretching of the sheet…
▽ More
The interaction of a thin viscous film with an elastic sheet results in coupling of pressure and deformation, which can be utilized as an actuation mechanism for surface deformations in a wide range of applications, including microfluidics, optics, and soft robotics. Implementation of such configurations inherently takes place over finite domains and often requires some pre-stretching of the sheet. Under the assumptions of strong pre-stretching and small deformations of the lubricated elastic sheet, we use the linearized Reynolds and Foppl-von Karman equations to derive closed-form analytical solutions describing the deformation in a finite domain due to external forces, accounting for both bending and tension effects. We provide a closed-form solution for the case of a square-shaped actuation region and present the effect of pre-stretching on the dynamics of the deformation. We further present the dependence of the deformation magnitude and timescale on the spatial wavenumber, as well as the transition between stretching- and bending-dominant regimes. We also demonstrate the effect of spatial discretization of the forcing (representing practical actuation elements) on the achievable resolution of the deformation. Extending the problem to an axisymmetric domain, we investigate the effects arising from nonlinearity of the Reynolds and Foppl-von Karman equations and present the deformation behavior as it becomes comparable to the initial film thickness and dependent on the induced tension. These results set the theoretical foundation for implementation of microfluidic soft actuators based on elastohydrodynanmics.
△ Less
Submitted 6 December, 2018; v1 submitted 20 March, 2017;
originally announced March 2017.
