Showing 1–9 of 9 results for author: He, A

Case studies on time-dependent Ginzburg-Landau simulations for superconducting applications

Authors: Cun Xue, Qing-Yu Wang, Han-Xi Ren, An He, A. V. Silhanek

Abstract: The macroscopic electromagnetic properties of type II superconductors are primarily influenced by the behavior of microscopic superconducting flux quantum units. Time-dependent Ginzburg-Landau (TDGL) equations provide an elegant and powerful tool for describing and examining both the statics and dynamics of these superconducting entities. They have been instrumental in replicating and elucidating… ▽ More The macroscopic electromagnetic properties of type II superconductors are primarily influenced by the behavior of microscopic superconducting flux quantum units. Time-dependent Ginzburg-Landau (TDGL) equations provide an elegant and powerful tool for describing and examining both the statics and dynamics of these superconducting entities. They have been instrumental in replicating and elucidating numerous experimental results over the past decades.This paper provides a comprehensive overview of the progress in TDGL simulations, focusing on three key aspects of superconductor applications. The initial section delves into vortex rectification in superconductors described within the TDGL framework. We specifically highlight the superconducting diode effect achieved through asymmetric pinning landscapes and the reversible manipulation of vortex ratchets with dynamic pinning landscapes. The subsequent section reviews the achievements of TDGL simulations concerning the critical current density of superconductors, emphasizing the optimization of pinning sites, particularly vortex pinning and dynamics in polycrystalline Nb$_3$Sn with grain boundaries. The third part concentrates on numerical modeling of vortex penetration and dynamics in superconducting radio frequency (SRF) cavities, including a discussion of superconductor insulator superconductor multilayer structures. In the last section, we present key findings, insights, and perspectives derived from the discussed simulations. △ Less

Submitted 4 June, 2024; v1 submitted 6 March, 2024; originally announced March 2024.

Comments: 20 pages,13 figures

Monolithic Integration of Embedded III-V Lasers on SOI

Authors: Wen Qi Wei, An He, Bo Yang, Jing-Zhi Huang, Dong Han, Min Ming, Zi Hao Wang, Xuhan Guo, Yikai Su, Jian Jun Zhang, Ting Wang

Abstract: Silicon photonic integration has gained great success in many application fields owing to the excellent optical device properties and complementary metal-oxide semiconductor (CMOS) compatibility. Realizing monolithic integration of III-V lasers and silicon photonic components on single silicon wafer is recognized as a long-standing obstacle for ultra-dense photonic integration, which can provide c… ▽ More Silicon photonic integration has gained great success in many application fields owing to the excellent optical device properties and complementary metal-oxide semiconductor (CMOS) compatibility. Realizing monolithic integration of III-V lasers and silicon photonic components on single silicon wafer is recognized as a long-standing obstacle for ultra-dense photonic integration, which can provide considerable economical, energy efficient and foundry-scalable on-chip light sources, that has not been reported yet. Here, we demonstrate embedded InAs/GaAs quantum dot (QD) lasers directly grown on trenched silicon-on-insulator (SOI) substrate, enabling monolithic integration with butt-coupled silicon waveguides. By utilizing the patterned grating structures inside pre-defined SOI trenches and unique epitaxial method via molecular beam epitaxy (MBE), high-performance embedded InAs QD lasers with out-coupled silicon waveguide are achieved on such template. By resolving the epitaxy and fabrication challenges in such monolithic integrated architecture, embedded III-V lasers on SOI with continuous-wave lasing up to 85 oC are obtained. The maximum output power of 6.8 mW can be measured from the end tip of the butt-coupled silicon waveguides, with estimated coupling efficiency of approximately -7.35 dB. The results presented here provide a scalable and low-cost epitaxial method for realization of on-chip light sources directly coupling to the silicon photonic components for future high-density photonic integration. △ Less

Submitted 16 July, 2022; originally announced July 2022.

High-accuracy three-dimensional surface detection in smoothed particle hydrodynamics for free-surface flows

Authors: Wen-Bin Liu, Dong-Jun Ma, Jian-Zhen Qian, Ming-Yu Zhang, An-Min He, Nan-Sheng Liu, Pei Wang

Abstract: In this study, we investigate high-accuracy three-dimensional surface detection in smoothed particle hydrodynamics for free-surface flows. A new geometrical method is first developed to enhance the accuracy of free-surface particle detection in complex flows. This method detects free-surface particles via continuous global scanning inside the sphere of a particle through a cone region whose vertex… ▽ More In this study, we investigate high-accuracy three-dimensional surface detection in smoothed particle hydrodynamics for free-surface flows. A new geometrical method is first developed to enhance the accuracy of free-surface particle detection in complex flows. This method detects free-surface particles via continuous global scanning inside the sphere of a particle through a cone region whose vertex corresponds to the particle position. The particle is identified as a free-surface particle if there exists a cone region with no neighboring particles. Next, an efficient semi-geometrical method is proposed based on the geometrical method to reduce the computational cost. It consists of finding particles near the free surface via position divergence and then detecting these particles using the geometrical method to identify free-surface particles. The accuracy and robustness of the proposed method are demonstrated by performing tests on several model problems. △ Less

Submitted 3 May, 2022; originally announced May 2022.

Reconstruction and interpretation of photon Doppler velocimetry spectrum for ejecta particles from shock-loaded sample in vacuum

Authors: Xiao-Feng Shi, Dong-Jun Ma, Song-lin Dang, Zong-Qiang Ma, Hai-Quan Sun, An-Min He, Pei Wang

Abstract: The photon Doppler velocimetry (PDV) spectrum is investigated in an attempt to reveal the particle parameters of ejecta from shock-loaded samples in a vacuum. A GPU-accelerated Monte-Carlo algorithm, which considers the multiple-scattering effects of light, is applied to reconstruct the light field of the ejecta and simulate the corresponding PDV spectrum. The influence of the velocity profile, to… ▽ More The photon Doppler velocimetry (PDV) spectrum is investigated in an attempt to reveal the particle parameters of ejecta from shock-loaded samples in a vacuum. A GPU-accelerated Monte-Carlo algorithm, which considers the multiple-scattering effects of light, is applied to reconstruct the light field of the ejecta and simulate the corresponding PDV spectrum. The influence of the velocity profile, total area mass, and particle size of the ejecta on the simulated spectra is discussed qualitatively. To facilitate a quantitative discussion, a novel theoretical optical model is proposed in which the single-scattering assumption is applied. With this model, the relationships between the particle parameters of ejecta and the peak information of the PDV spectrum are derived, enabling direct extraction of the particle parameters from the PDV spectrum. The values of the ejecta parameters estimated from the experimental spectrum are in good agreement with those measured by a piezoelectric probe. △ Less

Submitted 8 January, 2021; v1 submitted 1 December, 2020; originally announced December 2020.

Comments: 12 pages, 18figures

Chargeable photoconductivity in Van der Waals heterojunctions

Authors: Yucheng Jiang, Anpeng He, Yu Chen, Guozhen Liu, Hao Lu, Run Zhao, Mingshen Long, Ju Gao, Quanying Wu, Xiaotian Ge, Jiqiang Ning, Weida Hu

Abstract: Van der Waals (vdW) heterojunctions, based on two-dimensional (2D) materials, show great potential for the development of eco-friendly and high-efficiency nano-devices. Considerable research has been performed and has reported valuable applications of photovoltaic cells, photodetectors, etc. However, simultaneous energy conversion and storage in a single device has not been achieved. Here, we demo… ▽ More Van der Waals (vdW) heterojunctions, based on two-dimensional (2D) materials, show great potential for the development of eco-friendly and high-efficiency nano-devices. Considerable research has been performed and has reported valuable applications of photovoltaic cells, photodetectors, etc. However, simultaneous energy conversion and storage in a single device has not been achieved. Here, we demonstrate a simple strategy to construct a vdW p-n junction between a WSe2 layer and quasi-2D electron gas. After once optical illumination, the device stores the light-generated electrons and holes for up to seven days, and then releases a very large photocurrent of 2.9 mA with bias voltage applied in darkness; this is referred to as chargeable photoconductivity (CPC), which completely differs from any previously observed photoelectric phenomenon. In normal photoconductivity, the recombination of electron-hole pairs takes place at the end of their lifetime, causing a release of heat; in contrast, infinite-lifetime photocarriers can be generated in CPC devices without a thermal loss. The photoelectric conversion and storage are completely self-excited during the charging process. The ratio between currents in full- and empty-energy states below the critical temperature reaches as high as 109, with an external quantum efficiency of 4410000% during optical charging. A theoretical model developed to explain the mechanism of this effect is in good agreement with the experimental data. This work paves a path towards storage-type photoconductors and high-efficiency entropy-decreasing devices. △ Less

Submitted 14 January, 2020; originally announced January 2020.

Fast dynamic aperture optimization with reversal integration

Authors: Yongjun Li, Yue Hao, Kilean Hwang, Robert Rainer, An He, Ao Liu

Abstract: A fast method for dynamic aperture (DA) optimization of storage rings has been developed through the use of reversal integration. While chaotic dynamical systems have exact time-reversal symmetry, numerical forward integration differs from its reversal due to scaled cumulative round-off errors. The difference, intrinsically associated with the Lyapunov exponent, is a generic indicator of chaos bec… ▽ More A fast method for dynamic aperture (DA) optimization of storage rings has been developed through the use of reversal integration. While chaotic dynamical systems have exact time-reversal symmetry, numerical forward integration differs from its reversal due to scaled cumulative round-off errors. The difference, intrinsically associated with the Lyapunov exponent, is a generic indicator of chaos because it represents the sensitivity of chaotic motion to an initial condition. A chaos indicator of the charged particle motion is then obtained by comparing the forward integrations of particle trajectories with corresponding reversals, a.k.a. "backward integrations." The indicator was confirmed to be observable through short-term particle tracking simulations. Therefore, adopting it as an objective function could speed up optimization. The DA of the National Synchrotron Light Source II storage ring, and another test diffraction-limited light source ring, were optimized using this method for the purpose of demonstration. △ Less

Submitted 14 August, 2020; v1 submitted 29 November, 2019; originally announced December 2019.

Comments: 9 pages, 14 figures

Ultra-Compact Coupling Structures for Heterogeneously Integrated Silicon Lasers

Authors: An He, Lu Sun, Hongwei Wang, Xuhan Guo, Yikai Su

Abstract: Due to the inherent in-direct bandgap nature of Silicon, heterogeneous integration of semiconductor lasers on Silicon on Insulator (SOI) is crucial for next-generation on-chip optical interconnects. Compact, high-efficient and high-tolerant couplers between III-V light source and silicon chips have been the challenge for photonic integrated circuit (PIC). Here, we redesign the taper adiabatic coup… ▽ More Due to the inherent in-direct bandgap nature of Silicon, heterogeneous integration of semiconductor lasers on Silicon on Insulator (SOI) is crucial for next-generation on-chip optical interconnects. Compact, high-efficient and high-tolerant couplers between III-V light source and silicon chips have been the challenge for photonic integrated circuit (PIC). Here, we redesign the taper adiabatic coupler with the total coupling length of only 4 μm, and propose another two novel slot coupler and bridge-SWG coupler with both coupling length of 7 μm, to heterogeneously integrate III-V lasers and silicon chips. We study theoretically the optical mode coupling process through the redesigned taper coupler, the final coupling results match well with the simulation in 3D-FDTD. The three compact couplers represent fundamental TE mode coupling efficiencies all over 90%, even 95.7% for bridge-SWG coupler, to the best of our knowledge, are also the shortest coupling structures (7 um). Moreover, these coupling structures also possess excellent fabrication tolerance. △ Less

Submitted 27 June, 2019; originally announced June 2019.

Comments: 7 pages, 7 figures

Overcoming Barriers to Engagement with Educational Video Games for Self-Directed Learning: A Mixed-Methods Case Study

Authors: Angela He

Abstract: Research has established increased engagement and positive behavioral, attitudinal, and learning outcomes from educational games. Although engagement begets these benefits, there is a lack of research on how students engage with educational games, especially when self-directed. Additionally, research on the effects of engagement on performance is conflicting. This study aimed to identify barriers… ▽ More Research has established increased engagement and positive behavioral, attitudinal, and learning outcomes from educational games. Although engagement begets these benefits, there is a lack of research on how students engage with educational games, especially when self-directed. Additionally, research on the effects of engagement on performance is conflicting. This study aimed to identify barriers to students' self-directed engagement with two anatomy educational games, methods to overcome identified barriers, and the impact of engagement on learning performance. Employing the within-case and cross-case approach and triangulation of data, four educational-game specific barriers emerged (from most common to least common): 1) negative perceptions of educational games, 2) incompatible audience, 3) incompatible difficulty, and 4) price. Path analysis found that engagement may have insignificant, positive effects on performance. These findings indicate that students' self-directed engagement with educational games is impeded by unique barriers and engagement may not be vital for performance. Suggestions for game design and marketing emerged to help developers, teachers, and researchers overcome identified barriers. △ Less

Submitted 26 September, 2017; originally announced October 2017.

Comments: 67 pages, 3 figures, 2 tables

Hertz Beyond Belief

Authors: Andong He, John S. Wettlaufer

Abstract: We examine the validity of Hertz's linear elastic theory for central collisions using a viscoelastic model. This model explains why Hertz's theory is accurate in predicting the collision time and maximum contact area even when $40\%$ of the kinetic energy is lost due to viscous dissipation. The main reason is that both the collision time and maximum contact area have a very weak dependence on the… ▽ More We examine the validity of Hertz's linear elastic theory for central collisions using a viscoelastic model. This model explains why Hertz's theory is accurate in predicting the collision time and maximum contact area even when $40\%$ of the kinetic energy is lost due to viscous dissipation. The main reason is that both the collision time and maximum contact area have a very weak dependence on the impact velocity. Moreover, we show that colliding objects exhibit an apparent size dependent yield strength, which results from larger objects dissipating less energy at a given impact velocity. △ Less

Submitted 18 November, 2013; v1 submitted 20 June, 2013; originally announced June 2013.