Showing 1–24 of 24 results for author: Karkare, S

A structural analysis of ordered Cs$_{3}$Sb films grown on single crystal graphene and silicon carbide substrates

Authors: C. Pennington, M. Gaowei, E. M. Echeverria, K. Evans-Lutterodt, A. Galdi, T. Juffmann, S. Karkare, J. Maxson, S. J. van der Molen, P. Saha, J. Smedley, W. G. Stam, R. M. Tromp

Abstract: Alkali antimonides are well established as high efficiency, low intrinsic emittance photocathodes for accelerators and photon detectors. However, conventionally grown alkali antimonide films are polycrystalline with surface disorder and roughness that can limit achievable beam brightness. Ordering the crystalline structure of alkali antimonides has the potential to deliver higher brightness electr… ▽ More Alkali antimonides are well established as high efficiency, low intrinsic emittance photocathodes for accelerators and photon detectors. However, conventionally grown alkali antimonide films are polycrystalline with surface disorder and roughness that can limit achievable beam brightness. Ordering the crystalline structure of alkali antimonides has the potential to deliver higher brightness electron beams by reducing surface disorder and enabling the engineering of material properties at the level of atomic layers. In this report, we demonstrate the growth of ordered Cs$_{3}$Sb films on single crystal substrates 3C-SiC and graphene-coated 4H-SiC using pulsed laser deposition and conventional thermal evaporation growth techniques. The crystalline structures of the Cs$_{3}$Sb films were examined using reflection high energy electron diffraction (RHEED) and X-ray diffraction (XRD) diagnostics, while film thickness and roughness estimates were made using x-ray reflectivity (XRR). With these tools, we observed ordered domains in less than 10 nm thick films with quantum efficiencies greater than one percent at 530 nm. Moreover, we identify structural features such as Laue oscillations indicative of highly ordered films. We found that Cs$_{3}$Sb films grew with flat, fiber-textured surfaces on 3C-SiC and with multiple ordered domains and sub-nanometer surface roughness on graphene-coated 4H-SiC under our growth conditions. We identify the crystallographic orientations of Cs$_{3}$Sb grown on graphene-coated 4H-SiC substrates and discuss the significance of examining the crystal structure of these films for growing epitaxial heterostructures in future experiments. △ Less

Submitted 16 July, 2024; originally announced July 2024.

Harnessing Plasmonic Interference for Nanoscale Ultrafast Electron Sources

Authors: Alimohammed Kachwala, Mansoure Moeini Rizi, Christopher M Pierce, Daniele Filippetto, Jared Maxson, Siddharth Karkare

Abstract: In this paper we demonstrate the use of plasmonic focusing in conjunction with non-linear photoemisison to develop geometrically flat nanoscale electron sources with less than 40 pm-rad root mean squared (rms) normalized transverse emittance. Circularly polarized light is incident on a gold Archimedean spiral structure to generate surface-plasmon-polaritons which interfere coherently at the center… ▽ More In this paper we demonstrate the use of plasmonic focusing in conjunction with non-linear photoemisison to develop geometrically flat nanoscale electron sources with less than 40 pm-rad root mean squared (rms) normalized transverse emittance. Circularly polarized light is incident on a gold Archimedean spiral structure to generate surface-plasmon-polaritons which interfere coherently at the center resulting in a 50 nm rms emisison area. Such a nanostructured flat surface enables simultaneous spatio-temporal confinement of emitted electrons at the nanometer and femtosecond level and can be used as an advanced electron source for high-repetition-rate ultrafast electron diffraction and microscopy experiments as well as next-generation of miniaturized particle accelerators. △ Less

Submitted 12 June, 2024; originally announced June 2024.

Results and Limits of Time Division Multiplexing for the BICEP Array High Frequency Receivers

Authors: S. Fatigoni, P. A. R. Ade, Z. Ahmed, M. Amiri, D. Barkats, R. Basu Thakur, C. A. Bischoff, D. Beck, J. J. Bock, V. Buza, J. Cheshire, J. Connors, J. Cornelison, M. Crumrine, A. J. Cukierman, E. V. Denison, M. I. Dierickx, L. Duband, M. Eiben, J. P. Filippini, A. Fortes, M. Gao, C. Giannakopoulos, N. Goeckner-Wald, D. C. Goldfinger , et al. (62 additional authors not shown)

Abstract: Time-Division Multiplexing is the readout architecture of choice for many ground and space experiments, as it is a very mature technology with proven outstanding low-frequency noise stability, which represents a central challenge in multiplexing. Once fully populated, each of the two BICEP Array high frequency receivers, observing at 150GHz and 220/270GHz, will have 7776 TES detectors tiled on the… ▽ More Time-Division Multiplexing is the readout architecture of choice for many ground and space experiments, as it is a very mature technology with proven outstanding low-frequency noise stability, which represents a central challenge in multiplexing. Once fully populated, each of the two BICEP Array high frequency receivers, observing at 150GHz and 220/270GHz, will have 7776 TES detectors tiled on the focal plane. The constraints set by these two receivers required a redesign of the warm readout electronics. The new version of the standard Multi Channel Electronics, developed and built at the University of British Columbia, is presented here for the first time. BICEP Array operates Time Division Multiplexing readout technology to the limits of its capabilities in terms of multiplexing rate, noise and crosstalk, and applies them in rigorously demanding scientific application requiring extreme noise performance and systematic error control. Future experiments like CMB-S4 plan to use TES bolometers with Time Division/SQUID-based readout for an even larger number of detectors. △ Less

Submitted 24 October, 2023; v1 submitted 16 October, 2023; originally announced October 2023.

Comments: 10 pages, 7 figures, Submitted to Journal of Low Temperature Physics

Journal ref: Journal of Low Temperature Physics (2024)

Fabrication Development for SPT-SLIM, a Superconducting Spectrometer for Line Intensity Mapping

Authors: T. Cecil, C. Albert, A. J. Anderson, P. S. Barry, B. Benson, C. Cotter, C. Chang, M. Dobbs, K. Dibert, R. Gualtieri, K. S. Karkare, M. Lisovenko, D. P. Marrone, J. Montgomery, Z. Pan, G. Robson, M. Rouble, E. Shirokoff, G. Smecher, G. Wang, V. Yefremenko

Abstract: Line Intensity Mapping (LIM) is a new observational technique that uses low-resolution observations of line emission to efficiently trace the large-scale structure of the Universe out to high redshift. Common mm/sub-mm emission lines are accessible from ground-based observatories, and the requirements on the detectors for LIM at mm-wavelengths are well matched to the capabilities of large-format a… ▽ More Line Intensity Mapping (LIM) is a new observational technique that uses low-resolution observations of line emission to efficiently trace the large-scale structure of the Universe out to high redshift. Common mm/sub-mm emission lines are accessible from ground-based observatories, and the requirements on the detectors for LIM at mm-wavelengths are well matched to the capabilities of large-format arrays of superconducting sensors. We describe the development of an R = 300 on-chip superconducting filter-bank spectrometer covering the 120--180 GHz band optimized for future mm-LIM experiments, focusing on SPT-SLIM, a pathfinder LIM instrument for the South Pole Telescope. Radiation is coupled from the telescope optical system to the spectrometer chip via an array of feedhorn-coupled orthomode transducers. Superconducting microstrip transmission lines then carry the signal to an array of channelizing half-wavelength resonators, and the output of each spectral channel is sensed by a lumped element kinetic inductance detector (leKID). Key areas of development include incorporating new low-loss dielectrics to improve both the achievable spectral resolution and optical efficiency and development of a robust fabrication process to create a galvanic connection between ultra-pure superconducting thin-films to realize multi-material (hybrid) leKIDs. We provide an overview of the spectrometer design, fabrication process, and prototype devices. △ Less

Submitted 3 April, 2023; originally announced April 2023.

Comments: 7 pages, 7 figures, presented at 2022 Applied Superconductivity Conference

Electron Sources for Accelerators

Authors: Daniele Filippetto, Joe Grames, Carlos Hernandez-Garcia, Siddharth Karkare, Philippe Piot, John Power, Yine Sun, Erdong Wang

Abstract: Electron sources are essential to an array of electron accelerator supporting research in high-energy physics and beyond. This report summarizes the "Snowmass 2021 Electron Source Workshop" which reviewed the current state-of-the art research and identified some possible research directions. Electron sources are essential to an array of electron accelerator supporting research in high-energy physics and beyond. This report summarizes the "Snowmass 2021 Electron Source Workshop" which reviewed the current state-of-the art research and identified some possible research directions. △ Less

Submitted 18 July, 2022; originally announced July 2022.

Design of SPT-SLIM focal plane; a spectroscopic imaging array for the South Pole Telescope

Authors: P. S. Barry, A. Anderson, B. Benson, J. E. Carlstrom, T. Cecil, C. Chang, M. Dobbs, M. Hollister, K. S. Karkare, G. K. Keating, D. Marrone, J. McMahon, J. Montgomery, Z. Pan, G. Robson, M. Rouble, E. Shirokoff, G. Smecher

Abstract: The Summertime Line Intensity Mapper (SLIM) is a mm-wave line-intensity mapping (mm-LIM) experiment for the South Pole Telescope (SPT). The goal of SPT-SLIM is to serve as a technical and scientific pathfinder for the demonstration of the suitability and in-field performance of multi-pixel superconducting filterbank spectrometers for future mm-LIM experiments. Scheduled to deploy in the 2023-24 au… ▽ More The Summertime Line Intensity Mapper (SLIM) is a mm-wave line-intensity mapping (mm-LIM) experiment for the South Pole Telescope (SPT). The goal of SPT-SLIM is to serve as a technical and scientific pathfinder for the demonstration of the suitability and in-field performance of multi-pixel superconducting filterbank spectrometers for future mm-LIM experiments. Scheduled to deploy in the 2023-24 austral summer, the SPT-SLIM focal plane will include 18 dual-polarization pixels, each coupled to an $R = λ/Δλ$ = 300 thin- film microstrip filterbank spectrometer that spans the 2 mm atmospheric window (120-180 GHz). Each individual spectral channel feeds a microstrip-coupled lumped-element kinetic inductance detector, which provides the highly multiplexed readout for the 10k detectors needed for SPT-SLIM. Here we present an overview of the preliminary design of key aspects of the SPT-SLIM the focal plane array, a description of the detector architecture and predicted performance, and initial test results that will be used to inform the final design of the SPT- SLIM spectrometer array. △ Less

Submitted 8 November, 2021; originally announced November 2021.

Comments: Submitted to special issue of JLTP (proceedings of LTD19)

The Simulation and Design of an On-Chip Superconducting Millimetre Filter-Bank Spectrometer

Authors: Gethin Robson, Adam J. Anderson, Peter S. Barry, Simon Doyle, Kirit S. Karkare

Abstract: Superconducting on-chip filter-banks provide a scalable, space saving solution to create imaging spectrometers at millimetre and sub-millimetre wavelengths. We present an easy to realise, lithographed superconducting filter design with a high tolerance to fabrication error. Using a capacitively coupled $λ/2$ microstrip resonator to define a narrow ($λ/Δλ= 300$) spectral pass band, the filtered out… ▽ More Superconducting on-chip filter-banks provide a scalable, space saving solution to create imaging spectrometers at millimetre and sub-millimetre wavelengths. We present an easy to realise, lithographed superconducting filter design with a high tolerance to fabrication error. Using a capacitively coupled $λ/2$ microstrip resonator to define a narrow ($λ/Δλ= 300$) spectral pass band, the filtered output of a given spectrometer channel directly connects to a Lumped Element Kinetic Inductance Detector (LEKID). We show the tolerance analysis of our design, demonstrating $<11\%$ change in filter quality factor to any one realistic fabrication errors and a full filter-bank efficiency forecast to be 60\% after accounting for fabrication errors and dielectric loss tangent. △ Less

Submitted 14 June, 2022; v1 submitted 8 November, 2021; originally announced November 2021.

Comments: 8 pages, 5 figures. Pre-print for proceedings for the Journal of Low Temperature Physics, 19th Low Temperature Detectors Conference (LTD19)

Journal ref: Journal of Low Temperature Physics 2022

Photoemission characterization of N-polar III-Nitride photocathodes as bright electron beam source for accelerator applications

Authors: L. Cultrera, E. Rocco, F. Shahedipour-Sandvik, L. D. Bell, J. K. Bae, I. V. Bazarov, P. Saha, S. Karkare, A. Arjunan

Abstract: We report on the growth and characterization of a new class of photocathode structures for application as electron sources to produce high brightness electron beams for accelerator applications. The sources are realized using III-Nitride materials and are designed to leverage the strong polarization field characteristic of this class material while grown in their wurtzite crystal structure to prod… ▽ More We report on the growth and characterization of a new class of photocathode structures for application as electron sources to produce high brightness electron beams for accelerator applications. The sources are realized using III-Nitride materials and are designed to leverage the strong polarization field characteristic of this class material while grown in their wurtzite crystal structure to produce a negative electron affinity condition without the use of Cs, possibly allowing these materials to be operated in RF gun. A Quantum Efficiency (QE) of about 1x10$^{-3}$ and a Mean Transverse Energy (MTE) of electron of about 100 meV are measured at the operating wavelength of 265 nm. In a vacuum level of 3x10$^{-10}$ Torr the QE does not decrease after more than 24 hours of continuous operation. The lowest MTE, about 50 meV, is measured at 300 nm where the measured QE is 1.5x10$^{-5}$. Surface characterizations reveal possible contribution to the MTE due to the surface morphology calling for more detailed studies. △ Less

Submitted 4 October, 2021; originally announced October 2021.

Comments: will be submitted to Journal of Applied Physics

Monte Carlo Modeling of Spin-polarized Photoemission from p-doped GaAs Activated to Negative Electron Affinity

Authors: Oksana Chubenko, Siddharth Karkare, Dimitre Dimitrov, Jai Kwan Bae, Luca Cultrera, Ivan Bazarov, Andrei Afanasev

Abstract: The anticorrelation between quantum efficiency (QE) and electron spin polarization (ESP) from a p-doped GaAs activated to negative electron affinity (NEA) is studied in detail using an ensemble Monte Carlo approach. The photoabsorption, momentum and spin relaxation during transport, and tunnelling of electrons through the surface potential barrier are modeled to identify fundamental mechanisms, wh… ▽ More The anticorrelation between quantum efficiency (QE) and electron spin polarization (ESP) from a p-doped GaAs activated to negative electron affinity (NEA) is studied in detail using an ensemble Monte Carlo approach. The photoabsorption, momentum and spin relaxation during transport, and tunnelling of electrons through the surface potential barrier are modeled to identify fundamental mechanisms, which limit the efficiency of GaAs spin-polarized electron sources. In particular, we study the response of QE and ESP to various parameters such as the photoexcitation energy, doping density, and electron affinity level. Our modeling results for various transport and emission characteristics are in a good agreement with available experimental data. Our findings show that the behaviour of both QE and ESP at room temperature can be fully explained by the bulk relaxation mechanisms and the time which electrons spend in the material before being emitted. △ Less

Submitted 24 June, 2021; originally announced June 2021.

Journal ref: Journal of Applied Physics 130, 063101 (2021)

Receiver development for BICEP Array, a next-generation CMB polarimeter at the South Pole

Authors: L. Moncelsi, P. A. R. Ade, Z. Ahmed, M. Amiri, D. Barkats, R. Basu Thakur, C. A. Bischoff, J. J. Bock, V. Buza, J. Cheshire, J. Connors, J. Cornelison, M. Crumrine, A. Cukierman, E. V. Denison, M. Dierickx, L. Duband, M. Eiben, S. Fatigoni, J. P. Filippini, N. Goeckner-Wald, D. C. Goldfinger, J. Grayson, P. Grimes, G. Hall , et al. (50 additional authors not shown)

Abstract: A detection of curl-type ($B$-mode) polarization of the primary CMB would be direct evidence for the inflationary paradigm of the origin of the Universe. The BICEP/Keck Array (BK) program targets the degree angular scales, where the power from primordial $B$-mode polarization is expected to peak, with ever-increasing sensitivity and has published the most stringent constraints on inflation to date… ▽ More A detection of curl-type ($B$-mode) polarization of the primary CMB would be direct evidence for the inflationary paradigm of the origin of the Universe. The BICEP/Keck Array (BK) program targets the degree angular scales, where the power from primordial $B$-mode polarization is expected to peak, with ever-increasing sensitivity and has published the most stringent constraints on inflation to date. BICEP Array (BA) is the Stage-3 instrument of the BK program and will comprise four BICEP3-class receivers observing at 30/40, 95, 150 and 220/270 GHz with a combined 32,000+ detectors; such wide frequency coverage is necessary for control of the Galactic foregrounds, which also produce degree-scale $B$-mode signal. The 30/40 GHz receiver is designed to constrain the synchrotron foreground and has begun observing at the South Pole in early 2020. By the end of a 3-year observing campaign, the full BICEP Array instrument is projected to reach $σ_r$ between 0.002 and 0.004, depending on foreground complexity and degree of removal of $B$-modes due to gravitational lensing (delensing). This paper presents an overview of the design, measured on-sky performance and calibration of the first BA receiver. We also give a preview of the added complexity in the time-domain multiplexed readout of the 7,776-detector 150 GHz receiver. △ Less

Submitted 7 December, 2020; originally announced December 2020.

Comments: Proceedings of SPIE 2020 (AS111). This article supersedes arXiv:1808.00568 and arXiv:2002.05228

Ab initio many-body photoemission theory of transverse energy distribution of photoelectrons: PbTe(111) as a case study with experimental comparisons

Authors: J. Kevin Nangoi, Siddharth Karkare, Ravishankar Sundararaman, Howard A. Padmore, T. A. Arias

Abstract: This manuscript presents, to our knowledge, the first fully ab initio many-body photoemission framework to predict the transverse momentum distributions and the mean transverse energies (MTEs) of photoelectrons from single-crystal photocathodes. The need to develop such a theory stems from the lack of studies that provide complete understanding of the underlying fundamental processes governing the… ▽ More This manuscript presents, to our knowledge, the first fully ab initio many-body photoemission framework to predict the transverse momentum distributions and the mean transverse energies (MTEs) of photoelectrons from single-crystal photocathodes. The need to develop such a theory stems from the lack of studies that provide complete understanding of the underlying fundamental processes governing the transverse momentum distribution of photoelectrons emitted from single crystals. For example, initial predictions based on density-functional theory calculations of effective electron masses suggested that the (111) surface of PbTe would produce very small MTEs ($\leq$ 15 meV), whereas our experiments yielded MTEs ten to twenty times larger than these predictions, and also exhibited a lower photoemission threshold than predicted. The ab initio framework presented in this manuscript correctly reproduces the magnitude of the MTEs from our measurements in PbTe(111) and also the observed photoemission below the predicted threshold. Our results show that photoexcitations into bulk-like states and coherent, many-body electron-photon-phonon scattering processes, both of which initial predictions ignored, indeed play important roles in photoemission from PbTe(111). Finally, from the lessons learned, we recommend a procedure for rapid computational screening of potential single-crystal photocathodes for applications in next-generation ultrafast electron diffraction and X-ray free-electron lasers, which will enable new, significant advances in condensed matter research. △ Less

Submitted 25 June, 2020; v1 submitted 21 June, 2020; originally announced June 2020.

Comments: Submitting to Physical Review B

Journal ref: Phys. Rev. B 104, 115132 (2021)

An Ultra-Compact X-Ray Free-Electron Laser

Authors: J. B. Rosenzweig, N. Majernik, R. R. Robles, G. Andonian, O. Camacho, A. Fukasawa, A. Kogar, G. Lawler, Jianwei Miao, P. Musumeci, B. Naranjo, Y. Sakai, R. Candler, B. Pound, C. Pellegrini, C. Emma, A. Halavanau, J. Hastings, Z. Li, M. Nasr, S. Tantawi, P. Anisimov, B. Carlsten, F. Krawczyk, E. Simakov , et al. (11 additional authors not shown)

Abstract: In the field of beam physics, two frontier topics have taken center stage due to their potential to enable new approaches to discovery in a wide swath of science. These areas are: advanced, high gradient acceleration techniques, and x-ray free electron lasers (XFELs). Further, there is intense interest in the marriage of these two fields, with the goal of producing a very compact XFEL. In this con… ▽ More In the field of beam physics, two frontier topics have taken center stage due to their potential to enable new approaches to discovery in a wide swath of science. These areas are: advanced, high gradient acceleration techniques, and x-ray free electron lasers (XFELs). Further, there is intense interest in the marriage of these two fields, with the goal of producing a very compact XFEL. In this context, recent advances in high gradient radio-frequency cryogenic copper structure research have opened the door to the use of surface electric fields between 250 and 500 MV/m. Such an approach is foreseen to enable a new generation of photoinjectors with six-dimensional beam brightness beyond the current state-of-the-art by well over an order of magnitude. This advance is an essential ingredient enabling an ultra-compact XFEL (UC-XFEL). In addition, one may accelerate these bright beams to GeV scale in less than 10 meters. Such an injector, when combined with inverse free electron laser-based bunching techniques can produce multi-kA beams with unprecedented beam quality, quantified by ~50 nm-rad normalized emittances. These beams, when injected into innovative, short-period (1-10 mm) undulators uniquely enable UC-XFELs having footprints consistent with university-scale laboratories. We describe the architecture and predicted performance of this novel light source, which promises photon production per pulse of a few percent of existing XFEL sources. We review implementation issues including collective beam effects, compact x-ray optics systems, and other relevant technical challenges. To illustrate the potential of such a light source to fundamentally change the current paradigm of XFELs with their limited access, we examine possible applications in biology, chemistry, materials, atomic physics, industry, and medicine which may profit from this new model of performing XFEL science. △ Less

Submitted 14 August, 2020; v1 submitted 12 March, 2020; originally announced March 2020.

Comments: 80 pages, 24 figures

Ultracold electrons via Near-Threshold Photoemission from Single-Crystal Cu(100)

Authors: Siddharth Karkare, Gowri Adhikari, W. Andreas Schroeder, J. Kevin Nangoi, Tomas Arias, Jared Maxson, Howard Padmore

Abstract: Achieving a low mean transverse energy or temperature of electrons emitted from the photocathode-based electron sources is critical to the development of next-generation and compact X-ray Free Electron Lasers and Ultrafast Electron Diffraction, Spectroscopy and Microscopy experiments. In this paper, we demonstrate a record low mean transverse energy of 5 meV from the cryo-cooled (100) surface of c… ▽ More Achieving a low mean transverse energy or temperature of electrons emitted from the photocathode-based electron sources is critical to the development of next-generation and compact X-ray Free Electron Lasers and Ultrafast Electron Diffraction, Spectroscopy and Microscopy experiments. In this paper, we demonstrate a record low mean transverse energy of 5 meV from the cryo-cooled (100) surface of copper using near-threshold photoemission. Further, we also show that the electron energy spread obtained from such a surface is less than 11.5 meV, making it the smallest energy spread electron source known to date: more than an order of magnitude smaller than any existing photoemission, field emission or thermionic emission based electron source. Our measurements also shed light on the physics of electron emission and show how the energy spread at few meV scale energies is limited by both the temperature and the vacuum density of states. △ Less

Submitted 26 February, 2020; originally announced February 2020.

Journal ref: Phys. Rev. Lett. 125, 054801 (2020)

Characterizing the Sensitivity of 40 GHz TES Bolometers for BICEP Array

Authors: C. Zhang, P. A. R. Ade, Z. Ahmed, M. Amiri, D. Barkats, R. Basu Thakur, C. A. Bischoff, J. J. Bock, H. Boenish, E. Bullock, V. Buza, J. Cheshire, J. Connors, J. Cornelison, M. Crumrine, A. Cukierman, M. Dierickx, L. Duband, S. Fatigoni, J. P. Filippini, G. Hall, M. Halpern, S. Harrison, S. Henderson, S. R. Hildebrandt , et al. (44 additional authors not shown)

Abstract: The BICEP/Keck (BK) experiment aims to detect the imprint of primordial gravitational waves in the Cosmic Microwave Background polarization, which would be direct evidence of the inflation theory. While the tensor-to-scalar ratio has been constrained to be r_0.05 < 0.06 at 95% c.l., further improvements on this upper limit are hindered by polarized Galactic foreground emissions and removal of grav… ▽ More The BICEP/Keck (BK) experiment aims to detect the imprint of primordial gravitational waves in the Cosmic Microwave Background polarization, which would be direct evidence of the inflation theory. While the tensor-to-scalar ratio has been constrained to be r_0.05 < 0.06 at 95% c.l., further improvements on this upper limit are hindered by polarized Galactic foreground emissions and removal of gravitational lensing polarization. The 30/40 GHz receiver of the BICEP Array (BA) will deploy at the end of 2019 and will constrain the synchrotron foreground with unprecedented accuracy within the BK sky patch. We will show the design of the 30/40 GHz detectors and test results summarizing its performance. The low optical and atmospheric loading at these frequencies requires our TES detectors to have low saturation power in order to be photon-noise dominated. To realize the low thermal conductivity required from a 250 mK base temperature, we developed new bolometer leg designs. We will present the relevant measured detector parameters: G, Tc, Rn, Psat , and spectral bands, and noise spectra. We achieved a per bolometer NEP including all noise components of 2.07E-17 W/sqrt(Hz), including an anticipated photon noise level 1.54E-17 W/sqrt(Hz). △ Less

Submitted 12 February, 2020; originally announced February 2020.

Comments: Accepted for publication in Journal of Low Temperature Physics

Development of a 3-D energy-momentum analyzer for meV-scale energy electrons

Authors: S. Karkare, J. Feng, J. Maxson, H. A. Padmore

Abstract: In this article, we report on the development of a time-of-flight based electron energy analyzer capable of measuring the 3-D momentum and energy distributions of very low energy (meV-scale) photoemitted electrons. This analyzer is capable of measuring energy and 3-D momentum distributions of electrons with energies down to 1 meV with a sub-meV energy resolution. This analyzer is an ideal tool for… ▽ More In this article, we report on the development of a time-of-flight based electron energy analyzer capable of measuring the 3-D momentum and energy distributions of very low energy (meV-scale) photoemitted electrons. This analyzer is capable of measuring energy and 3-D momentum distributions of electrons with energies down to 1 meV with a sub-meV energy resolution. This analyzer is an ideal tool for studying photoemission processes very close to the photoemission threshold and also for studying the physics of photoemission based electron sources. △ Less

Submitted 4 April, 2019; originally announced April 2019.

Brightness of nonequilibrium photoemission in metallic photocathodes near threshold

Authors: Jai Kwan Bae, Ivan Bazarov, Pietro Musumeci, Siddharth Karkare, Howard Padmore, Jared Maxson

Abstract: The operation of photoemission electron sources with wavelengths near the photoemission threshold has been shown to dramatically decrease the minimum achievable photocathode emittance, but at the cost of significantly reduced quantum efficiency (QE). In this work, we show that for femtosecond laser and electron pulses, the increase in required laser intensities due to the low QE drives the photoca… ▽ More The operation of photoemission electron sources with wavelengths near the photoemission threshold has been shown to dramatically decrease the minimum achievable photocathode emittance, but at the cost of significantly reduced quantum efficiency (QE). In this work, we show that for femtosecond laser and electron pulses, the increase in required laser intensities due to the low QE drives the photocathode electronic distribution far from static equilibrium. We adapt an existing dynamic model of the electron occupation under high intensity laser illumination to predict the time-dependent effects of the nonequilibrium electron distribution on the QE, mean transverse energy (MTE), and emission brightness of metal phtocathodes. We find that multiphoton photoemission dramatically alters the MTE as compared to thermal equilibrium models, causing the MTE to no longer be a monotonic function of photon excess energy. △ Less

Submitted 21 August, 2018; originally announced August 2018.

Comments: 7 pages, 5 figures

A One-Step Model of Photoemission from Single Crystal Surfaces

Authors: Siddharth Karkare, Weishi Wan, Jun Feng, Tai C. Chiang, Howard A. Padmore

Abstract: In this paper, we present a 3-D one step photoemission model that can be used to calculate the quantum efficiency and momentum distributions of electrons photoemitted from ordered single crystal surfaces close to the photoemission threshold. Using Ag(111) as an example, we show that the model can not only calculate the quantum efficiency from the surface state accurately without using any ad hoc p… ▽ More In this paper, we present a 3-D one step photoemission model that can be used to calculate the quantum efficiency and momentum distributions of electrons photoemitted from ordered single crystal surfaces close to the photoemission threshold. Using Ag(111) as an example, we show that the model can not only calculate the quantum efficiency from the surface state accurately without using any ad hoc parameters, but also provides a theoretical quantitative explanation of the vectorial photoelectric effect. This model in conjunction with other band structure and wave function calculation techniques can be effectively used to screen single crystal photoemitters for use as electron sources for particle accelerator and ultrafast electron diffraction applications. △ Less

Submitted 22 December, 2016; originally announced December 2016.

Journal ref: Phys. Rev. B 95, 075439 (2017)

Near atomically smooth alkali antimonide photocathode thin films

Authors: Jun Feng, Siddharth Karkare, James Nasiatka, Susanne Schubert, John Smedley, Howard Padmore

Abstract: Nano-roughness limits the emittance of electron beams that can be generated by high efficiency photocathodes, such as the thermally reacted alkali antimonide thin films. However there is an urgent need for photocathodes that can produce an order of magnitude or more lower emittance than present day systems in order to increase the transverse coherence width of the electron beam. In this paper we d… ▽ More Nano-roughness limits the emittance of electron beams that can be generated by high efficiency photocathodes, such as the thermally reacted alkali antimonide thin films. However there is an urgent need for photocathodes that can produce an order of magnitude or more lower emittance than present day systems in order to increase the transverse coherence width of the electron beam. In this paper we demonstrate a method for producing alkali antimonide cathodes with near atomic smoothness with high reproducibility. △ Less

Submitted 13 October, 2016; originally announced October 2016.

Ultrafast laser pulse heating of metallic photocathodes and its contribution to intrinsic emittance

Authors: J. Maxson, P. Musumeci, L. Cultrera, S. Karkare, H. Padmore

Abstract: The heating of the electronic distribution of a copper photocathode due to an intense drive laser pulse is calculated under the two-temperature model using fluences and pulse lengths typical in RF photoinjector operation. Using the finite temperature-extended relations for the photocathode intrinsic emittance and quantum efficiency, the time-dependent emittance growth due to the same photoemission… ▽ More The heating of the electronic distribution of a copper photocathode due to an intense drive laser pulse is calculated under the two-temperature model using fluences and pulse lengths typical in RF photoinjector operation. Using the finite temperature-extended relations for the photocathode intrinsic emittance and quantum efficiency, the time-dependent emittance growth due to the same photoemission laser pulse is calculated. This laser heating is seen to limit the intrinsic emittance achievable for photoinjectors using short laser pulses and low quantum efficiency metal photocathodes. A pump-probe photocathode experiment in a standard 1.6 cell S-band gun is proposed, in which simulations show the time dependent thermal emittance modulation within the bunch from laser heating can persist for meters downstream and, in principle, be measured using a slice emittance diagnostic. △ Less

Submitted 22 August, 2016; v1 submitted 17 June, 2016; originally announced June 2016.

Cold electron beams from cryo-cooled, alkali antimonide photocathodes

Authors: Luca Cultrera, Siddharth Karkare, Hyeri Lee, Xianghong Liu, Ivan Bazarov

Abstract: In this letter we report on the generation of cold electron beams using a Cs3Sb photocathode grown by co-deposition of Sb and Cs. By cooling the photocathode to 90 K we demonstrate a significant reduction in the mean transverse energy validating the long standing speculation that the lattice temperature contribution limits the mean transverse energy or thermal emittance near the photoemission thre… ▽ More In this letter we report on the generation of cold electron beams using a Cs3Sb photocathode grown by co-deposition of Sb and Cs. By cooling the photocathode to 90 K we demonstrate a significant reduction in the mean transverse energy validating the long standing speculation that the lattice temperature contribution limits the mean transverse energy or thermal emittance near the photoemission threshold, opening new frontiers in generating ultra-bright beams. At 90 K, we achieve a record low thermal emittance of 0.2 $μ$m (rms) per mm of laser spot diameter from an ultrafast (sub-picosecond) photocathode with quantum efficiency greater than $7\times 10^{-5}$ using a visible laser wavelength of 690 nm. △ Less

Submitted 22 April, 2015; originally announced April 2015.

Demonstration of Low Emittance in the Cornell Energy Recovery Linac Injector Prototype

Authors: Colwyn Gulliford, Adam Bartnik, Ivan Bazarov, Luca Cultrera, John Dobbins, Bruce Dunham, Francisco Gonzalez, Siddharth Karkare, Hyeri Lee, Heng Li, Yulin Li, Xianghong Liu, Jared Maxson, Christian Nguyen, Karl Smolenski, Zhi Zhao

Abstract: We present a detailed study of the six-dimensional phase space of the electron beam produced by the Cornell Energy Recovery Linac Photoinjector, a high-brightness, high repetition rate (1.3 GHz) DC photoemission source designed to drive a hard x-ray energy recovery linac (ERL). A complete simulation model of the injector has been constructed, verified by measurement, and optimized. Both the horizo… ▽ More We present a detailed study of the six-dimensional phase space of the electron beam produced by the Cornell Energy Recovery Linac Photoinjector, a high-brightness, high repetition rate (1.3 GHz) DC photoemission source designed to drive a hard x-ray energy recovery linac (ERL). A complete simulation model of the injector has been constructed, verified by measurement, and optimized. Both the horizontal and vertical 2D transverse phase spaces, as well as the time-resolved (sliced) horizontal phase space, were simulated and directly measured at the end of the injector for 19 pC and 77 pC bunches at roughly 8 MeV. These bunch charges were chosen because they correspond to 25 mA and 100 mA average current if operating at the full 1.3 GHz repetition rate. The resulting 90% normalized transverse emittances for 19 (77) pC/bunch were 0.23 +/- 0.02 (0.51 +/- 0.04) microns in the horizontal plane, and 0.14 +/- 0.01 (0.29 +/- 0.02) microns in the vertical plane, respectively. These emittances were measured with a corresponding bunch length of 2.1 +/- 0.1 (3.0 +/- 0.2) ps, respectively. In each case the rms momentum spread was determined to be on the order of 1e-3. Excellent overall agreement between measurement and simulation has been demonstrated. Using the emittances and bunch length measured at 19 pC/bunch, we estimate the electron beam quality in a 1.3 GHz, 5 GeV hard x-ray ERL to be at least a factor of 20 times better than that of existing storage rings when the rms energy spread of each device is considered. These results represent a milestone for the field of high-brightness, high-current photoinjectors. △ Less

Submitted 23 July, 2013; v1 submitted 9 April, 2013; originally announced April 2013.

Comments: Physical Review Special Topics - Accelerators and Beams 16, 073401 (2013)

Photocathode Behavior During High Current Running in the Cornell ERL Photoinjector

Authors: Luca Cultrera, Jared Maxson, Ivan Bazarov, Sergey Belomestnykh, John Dobbins, Bruce Dunham, Siddharth Karkare, Roger Kaplan, Vaclav Kostroun, Yulin Li, Xianghong Liu, Florian Löhl, Karl Smolenski, Zhi Zhao, David Rice, Peter Quigley, Maury Tigner, Vadim Veshcherevich, Kenneth Finkelstein, Darren Dale, Benjamin Pichler

Abstract: The Cornell University Energy Recovery Linac (ERL) photoinjector has recently demonstrated operation at 20 mA for approximately 8 hours, utilizing a multialkali photocathode deposited on a Si substrate. We describe the recipe for photocathode deposition, and will detail the parameters of the run. Post-run analysis of the photocathode indicates the presence of significant damage to the substrate, p… ▽ More The Cornell University Energy Recovery Linac (ERL) photoinjector has recently demonstrated operation at 20 mA for approximately 8 hours, utilizing a multialkali photocathode deposited on a Si substrate. We describe the recipe for photocathode deposition, and will detail the parameters of the run. Post-run analysis of the photocathode indicates the presence of significant damage to the substrate, perhaps due to ion back-bombardment from the residual beamline gas. While the exact cause of the substrate damage remains unknown, we describe multiple surface characterization techniques (X-ray fluorescence spectroscopy, X-ray diffraction, atomic force and scanning electron microscopy) used to study the interesting morphological and crystallographic features of the photocathode surface after its use for high current beam production. Finally, we present a simple model of crystal damage due to ion back-bombardment, which agrees qualitatively with the distribution of damage on the substrate surface. △ Less

Submitted 16 October, 2011; originally announced October 2011.

Comments: 20 pages, 15 figures

Thermal emittance measurements of a cesium potassium antimonide photocathode

Authors: Ivan Bazarov, Luca Cultrera, Adam Bartnik, Bruce Dunham, Siddharth Karkare, Yulin Li, Xianghong Liu, Jared Maxson, William Roussel

Abstract: Thermal emittance measurements of a CsK2Sb photocathode at several laser wavelengths are presented. The emittance is obtained with a solenoid scan technique using a high voltage dc photoemission gun. The thermal emittance is 0.56+/-0.03 mm-mrad/mm(rms) at 532 nm wavelength. The results are compared with a simple photoemission model and found to be in a good agreement. Thermal emittance measurements of a CsK2Sb photocathode at several laser wavelengths are presented. The emittance is obtained with a solenoid scan technique using a high voltage dc photoemission gun. The thermal emittance is 0.56+/-0.03 mm-mrad/mm(rms) at 532 nm wavelength. The results are compared with a simple photoemission model and found to be in a good agreement. △ Less

Submitted 11 May, 2011; originally announced May 2011.

Comments: APL 2011

Journal ref: Applied Physics Letters 98 (2011) 224101

Effect of nano-scale surface roughness on transverse energy spread from GaAs photocathodes

Authors: Siddharth Karkare, Ivan Bazarov

Abstract: High quantum yield, low transverse energy spread and prompt response time make GaAs activated to negative electron affnity, an ideal candidate for a photocathode in high brightness photoinjectors. Even after decades of investigation, the exact mechanism of electron emission from GaAs is not well understood. We show that a nanoscale surface roughness can affect the transverse electron spread from G… ▽ More High quantum yield, low transverse energy spread and prompt response time make GaAs activated to negative electron affnity, an ideal candidate for a photocathode in high brightness photoinjectors. Even after decades of investigation, the exact mechanism of electron emission from GaAs is not well understood. We show that a nanoscale surface roughness can affect the transverse electron spread from GaAs by nearly an order of magnitude and explain the seemingly controversial experimental results obtained so far. This model can also explain the measured dependence of transverse energy spread on the wavelength of incident light. △ Less

Submitted 23 February, 2011; originally announced February 2011.

Comments: 3pages, 3figures