-
Frequency-offset separated oscillatory fields technique applied to neutrons
Authors:
Anastasio Fratangelo,
Philipp Heil,
Christine Klauser,
Gjon Markaj,
Marc Persoz,
Ciro Pistillo,
Ivo Schulthess,
Jacob Thorne,
Florian M. Piegsa
Abstract:
The novel technique of frequency-offset separated oscillatory fields (FOSOF) has been originally proposed as a modification to Ramsey's method of separated oscillatory fields. It has recently been employed in precision measurements with atomic beams since it allows for an alternative approach to determine absolute resonance frequencies. We present results from a systematic investigation of the FOS…
▽ More
The novel technique of frequency-offset separated oscillatory fields (FOSOF) has been originally proposed as a modification to Ramsey's method of separated oscillatory fields. It has recently been employed in precision measurements with atomic beams since it allows for an alternative approach to determine absolute resonance frequencies. We present results from a systematic investigation of the FOSOF technique adapted to a beam of cold neutrons.
△ Less
Submitted 23 April, 2024;
originally announced June 2024.
-
Resonant Cancellation Effect in Ramsey Experiments
Authors:
Ivo Schulthess,
Ivan Calic,
Estelle Chanel,
Anastasio Fratangelo,
Philipp Heil,
Christine Klauser,
Gjon Markaj,
Marc Persoz,
Ciro Pistillo,
Jacob Thorne,
Florian M. Piegsa
Abstract:
We investigate the response of a Ramsey-type experiment on an additional oscillating magnetic field. This superimposed field is oriented in the same direction as the static main magnetic field and causes a modulation of the original Larmor spin precession frequency. The observable magnitude of this modulation reduces at higher frequencies of the oscillating field. It disappears completely if the i…
▽ More
We investigate the response of a Ramsey-type experiment on an additional oscillating magnetic field. This superimposed field is oriented in the same direction as the static main magnetic field and causes a modulation of the original Larmor spin precession frequency. The observable magnitude of this modulation reduces at higher frequencies of the oscillating field. It disappears completely if the interaction time of the particles matches the oscillation period, which we call resonant cancellation. We present an analytical approach that describes the effect and compare it to a measurement using a monochromatic cold neutron beam.
△ Less
Submitted 16 June, 2023;
originally announced June 2023.
-
Improving position resolution of neutron detectors with ultra-thin B4C foils
Authors:
N. F. V. Duarte,
J. S. Marcos,
A. Antognini,
C. Klauser,
S. A. Felix,
C. M. B. Monteiro,
F. D. Amaro
Abstract:
A new technique for detection of slow neutrons with gaseous detectors using ultra-thin layers with 10B atoms is presented. The reaction between a thermal neutron and a 10B atom releases 2 secondary particles, namely a 7Li ion and an alpha particle, which due to momentum conservation are emitted in opposite directions, along the same line (back to back). Current boron coated neutron detectors are e…
▽ More
A new technique for detection of slow neutrons with gaseous detectors using ultra-thin layers with 10B atoms is presented. The reaction between a thermal neutron and a 10B atom releases 2 secondary particles, namely a 7Li ion and an alpha particle, which due to momentum conservation are emitted in opposite directions, along the same line (back to back). Current boron coated neutron detectors are equipped with 10B films with thicknesses of several micrometers, deposited on very thick substrate plates. However, since the ranges of the 7Li ion and the alpha particle are of few micrometeres in most materials, one of these particles is always lost in the 10B layer or substrate. As such, these detectors lose the ability to reconstruct the reaction line of action and to precisely determine the neutron position, as only one of the two secondary particles track can be measured. With the technique now presented, the sum of the 10B layer and the substrate thicknesses is small enough to allow for both secondary particles to escape and ionize the gas in opposite sides of the 10B converter foil. Independent readout structures, one on each side of the 10B converter foil, detect each secondary particle and determine its track centroid and the deposited energy. Since the two secondary particles are emitted back to back, the neutron position can be obtained by combining the information recorded by the two readout structures. Through GEANT4 simulations, we verified that the spatial resolution can be significantly improved: our results show that, by using a B4C layer with a thickness of 1 micron on a 0.9 micron Mylar substrate, the spatial resolution can by improved by a factor of 8, compared to conventional detectors with thick 10B detection layers.
△ Less
Submitted 26 February, 2022;
originally announced February 2022.
-
A non-depolarizing CuTi neutron supermirror guide for PERC
Authors:
A. Hollering,
N. Rebrova,
C. Klauser,
Th. Lauer,
B. Märkisch,
U. Schmidt
Abstract:
Neutron guides are used to transport slow neutrons from sources to experiments. Conventional neutron supermirror guides use alternating thin layers based on nickel and titanium. Due to the magnetic properties of nickel, their neutron reflection properties are spin-dependent, in particular when exposed to high magnetic fields. Motivated by the requirements of precision experiments on neutron beta d…
▽ More
Neutron guides are used to transport slow neutrons from sources to experiments. Conventional neutron supermirror guides use alternating thin layers based on nickel and titanium. Due to the magnetic properties of nickel, their neutron reflection properties are spin-dependent, in particular when exposed to high magnetic fields. Motivated by the requirements of precision experiments on neutron beta decay, we present novel supermirrors based on copper and titanium, which preserve the neutron beam polarization. These show excellent reflectivity and prove to be very stable even when exposed to high temperatures.
△ Less
Submitted 10 March, 2022; v1 submitted 1 December, 2021;
originally announced December 2021.
-
Design of the Magnet System of the Neutron Decay Facility PERC
Authors:
Xiangzun Wang,
Carmen Ziener,
Hartmut Abele,
Stefan Bodmaier,
Dirk Dubbers,
Jaqueline Erhart,
Alexander Hollering,
Erwin Jericha,
Jens Klenke,
Harald Fillunger,
Werner Heil,
Christine Klauser,
Gertrud Konrad,
Max Lamparth,
Thorsten Lauer,
Michael Klopf,
Reinhard Maix,
Bastian Märkisch,
Wilfried Mach,
Holger Mest,
Daniel Moser,
Alexander Pethoukov,
Lukas Raffelt,
Nataliya Rebrova,
Christoph Roick
, et al. (5 additional authors not shown)
Abstract:
The PERC (Proton and Electron Radiation Channel) facility is currently under construction at the research reactor FRM II, Garching. It will serve as an intense and clean source of electrons and protons from neutron beta decay for precision studies. It aims to contribute to the determination of the Cabibbo-Kobayashi-Maskawa quark-mixing element $V_{ud}$ from neutron decay data and to search for new…
▽ More
The PERC (Proton and Electron Radiation Channel) facility is currently under construction at the research reactor FRM II, Garching. It will serve as an intense and clean source of electrons and protons from neutron beta decay for precision studies. It aims to contribute to the determination of the Cabibbo-Kobayashi-Maskawa quark-mixing element $V_{ud}$ from neutron decay data and to search for new physics via new effective couplings. PERC's central component is a 12m long superconducting magnet system. It hosts an 8m long decay region in a uniform field. An additional high-field region selects the phase space of electrons and protons which can reach the detectors and largely improves systematic uncertainties. We discuss the design of the magnet system and the resulting properties of the magnetic field.
△ Less
Submitted 24 May, 2019;
originally announced May 2019.