Showing 1–50 of 219 results for author: Lin, L

CCAT: Detector Noise Limited Performance of the RFSoC-based Readout Electronics for mm/sub-mm/far-IR KIDs

Authors: Adrian K. Sinclair, James Burgoyne, Anthony I. Huber, Colin Murphy, Steve K. Choi, Cody J. Duell, Zachary B. Huber, Yaqiong Li, Scott C. Chapman, Michael D. Niemack, Thomas Nikola, Eve M. Vavagiakis, Samantha Walker, Jordan D. Wheeler, Jason Austermann, Lawrence Lin, Ruixuan Xie, Bugao Zou, Philip D. Mauskopf

Abstract: The Fred Young Submillimeter Telescope (FYST), on Cerro Chajnantor in the Atacama desert of Chile, will conduct wide-field and small deep-field surveys of the sky with more than 100,000 detectors on the Prime-Cam instrument. Kinetic inductance detectors (KIDs) were chosen as the primary sensor technology for their high density focal plane packing. Additionally, they benefit from low cost, ease of… ▽ More The Fred Young Submillimeter Telescope (FYST), on Cerro Chajnantor in the Atacama desert of Chile, will conduct wide-field and small deep-field surveys of the sky with more than 100,000 detectors on the Prime-Cam instrument. Kinetic inductance detectors (KIDs) were chosen as the primary sensor technology for their high density focal plane packing. Additionally, they benefit from low cost, ease of fabrication, and simplified cryogenic readout, which are all beneficial for successful deployment at scale. The cryogenic multiplexing complexity is pulled out of the cryostat and is instead pushed into the digital signal processing of the room temperature electronics. Using the Xilinx Radio Frequency System on a Chip (RFSoC), a highly multiplexed KID readout was developed for the first light Prime-Cam and commissioning Mod-Cam instruments. We report on the performance of the RFSoC-based readout with multiple detector arrays in various cryogenic setups. Specifically we demonstrate detector noise limited performance of the RFSoC-based readout under the expected optical loading conditions. △ Less

Submitted 21 June, 2024; originally announced June 2024.

Comments: draft submitted to SPIE

High Performance Operation of a Direct-Current and Superconducting Radio-Frequency Combined Photocathode Gun

Authors: H. Jia, T. Li, T. Wang, Y. Zhao, X. Zhang, H. Xu, Z. Liu, J. Liu, L. Lin, H. Xie, L. Feng, F. Wang, F. Zhu, J. Hao, S. Quan, K. Liu, S. Huang

Abstract: Superconducting radio-frequency (SRF) guns are promising candidates to deliver high brightness continuous-wave (CW) electron beams for new generations of coherent linac light sources, ultrafast electron diffractions, MeV pulsed beam applications, etc. To solve the compatibility problem of semiconductor photocathodes, a hybrid gun combining a direct-current gap and an SRF cavity has been developed.… ▽ More Superconducting radio-frequency (SRF) guns are promising candidates to deliver high brightness continuous-wave (CW) electron beams for new generations of coherent linac light sources, ultrafast electron diffractions, MeV pulsed beam applications, etc. To solve the compatibility problem of semiconductor photocathodes, a hybrid gun combining a direct-current gap and an SRF cavity has been developed. The gun, employing K2CsSb photocathodes driven by a green laser, has been brought into stable CW operation with a dark current below 100 pA, delivering electron beams at an energy gain of 2.4 MeV, an electron bunch charge of 100 pC, and a repetition rate of 1 MHz. A normalized beam emittance of 0.54 mm-mrad has been achieved at the bunch charge of 100 pC and peak current of about 6 A. CW operation at 81.25 MHz repetition rate has also been tested with the maximum average beam current reaching 3 mA. △ Less

Submitted 2 June, 2024; originally announced June 2024.

Comments: 6 pages, 5 figures

Eliminating nearfield coupling in dense high quality factor phase gradient metasurfaces

Authors: Samuel Ameyaw, Lin Lin, Bo Zhao, Hamish Carr Delgado, Mark Lawrence

Abstract: High Q phase gradient metasurfaces are becoming promising elements for revolutionizing light manipulation but near-field coupling typically forces a trade-off between quality factor and resolution. Here, we show a strategy for not just reducing but eliminating coupling-based nonlocal effects in wave shaping metasurfaces composed of meta-pixels with arbitrarily high Q arranged with sub-diffraction… ▽ More High Q phase gradient metasurfaces are becoming promising elements for revolutionizing light manipulation but near-field coupling typically forces a trade-off between quality factor and resolution. Here, we show a strategy for not just reducing but eliminating coupling-based nonlocal effects in wave shaping metasurfaces composed of meta-pixels with arbitrarily high Q arranged with sub-diffraction spatial resolution. By working at a zero-coupling regime introduced by the interference between enhanced longitudinal and transverse electric fields, the tradeoff between Q and resolution no longer exists. Exploiting for wave shaping the ability to fully suppress coupling between high Q meta-atoms, we numerically show structurally uniform devices that produce beam-splitting to angles of $\pm53^o$ and beam-steering to an angle of $33^o$ with diffraction efficiencies over 90% via refractive index bias of just $2\times10^{-6}$ and $7\times10^{-6}$, respectively. These are made possible by the meta-structure supporting local dipole resonances with Qs of 2.8 million and 0.87 million respectively, arranged with a dense pixel pitch of $λ/1.6$. Extending the approach to structures with $λ/2.2$ resolution we also unlock full-field beam steering via index biasing of just $1\times10^{-4}$. The signature of a zero-coupling regime is discovered in the form of a sign flip in the angular dispersion with resonant wavelength in experiment which validates our scheme. Aside from triangulating a perfect decoupling configuration, one of our fabricated nanofin-isolated metasurfaces with Q-factor >870 has a resonant wavelength that stays within the half linewidth for incident angles of $-20^o$ to $20^o$. Our platform provides a route for densely arrayed high Q metasurfaces with independently addressable constituent meta-atoms, paving the way for highly efficient nonlinear and dynamic wavefront shaping. △ Less

Submitted 14 May, 2024; originally announced May 2024.

Comments: 25 pages,11 figures

Revisiting the apparent horizon finding problem with multigrid methods

Authors: Hon-Ka Hui, Lap-Ming Lin

Abstract: Apparent horizon plays an important role in numerical relativity as it provides a tool to characterize the existence and properties of black holes on three-dimensional spatial slices in 3+1 numerical spacetimes. Apparent horizon finders based on different techniques have been developed. In this paper, we revisit the apparent horizon finding problem in numerical relativity using multigrid-based alg… ▽ More Apparent horizon plays an important role in numerical relativity as it provides a tool to characterize the existence and properties of black holes on three-dimensional spatial slices in 3+1 numerical spacetimes. Apparent horizon finders based on different techniques have been developed. In this paper, we revisit the apparent horizon finding problem in numerical relativity using multigrid-based algorithms. We formulate the nonlinear elliptic apparent horizon equation as a linear Poisson-type equation with a nonlinear source, and solve it using a multigrid algorithm with Gauss-Seidel line relaxation. A fourth order compact finite difference scheme in spherical coordinates is derived and employed to reduce the complexity of the line relaxation operator to a tri-diagonal matrix inversion. The multigrid-based apparent horizon finder developed in this work is capable of locating apparent horizons in generic spatial hypersurfaces without any symmetries. The finder is tested with both analytic data, such as Brill-Lindquist multiple black hole data, and numerical data, including off-centered Kerr-Schild data and dynamical inspiraling binary black hole data. The obtained results are compared with those generated by the current fastest finder AHFinderDirect (Thornburg, Class. Quantum Grav. 21, 743, 2003), which is the default finder in the open source code Einstein Toolkit. Our finder performs comparatively in terms of accuracy, and starts to outperform AHFinderDirect at high angular resolutions (\sim 1^\circ) in terms of speed. Our finder is also more flexible to initial guess, as opposed to the Newton's method used in AHFinderDirect. This suggests that the multigrid algorithm provides an alternative option for studying apparent horizons, especially when high resolutions are needed. △ Less

Submitted 25 April, 2024; originally announced April 2024.

Comments: 21 pages, 4 figures

A static quantum embedding scheme based on coupled cluster theory

Authors: Avijit Shee, Fabian M. Faulstich, Birgitta Whaley, Lin Lin, Martin Head-Gordon

Abstract: We develop a static quantum embedding scheme, utilizing projection equations to solve coupled cluster (CC) amplitudes. To reduce the computational cost (for example, of a large basis set calculation), we solve the local fragment problem using a high-level coupled cluster method and address the environment problem with a lower-level Møller-Plesset (MP) perturbative method. This embedding approach i… ▽ More We develop a static quantum embedding scheme, utilizing projection equations to solve coupled cluster (CC) amplitudes. To reduce the computational cost (for example, of a large basis set calculation), we solve the local fragment problem using a high-level coupled cluster method and address the environment problem with a lower-level Møller-Plesset (MP) perturbative method. This embedding approach is consistently formulated within the coupled cluster framework and will be called MP-CC. We demonstrate the effectiveness of our method through several prototypical molecular examples by analyzing a global quantity, that is, the total correlation energy of the system in the study of potential energy curves (PEC) and thermochemical reaction energies. We have shown that our method can achieve comparable accuracy both with a small and large basis set when the fragment Hilbert space size remains the same. Additionally, our results indicate that increasing the fragment size can systematically enhance the accuracy of observables, approaching the precision of the full coupled cluster solver. △ Less

Submitted 13 April, 2024; originally announced April 2024.

Recent advances on CO2-assisted synthesis of metal nanoparticles for the upgrading of biomass-derived compounds

Authors: Zhiwei Jiang, Yongjian Zeng, Ruichao Guo, Lu Lin, Rafael Luque, Kai Yan

Abstract: Nanostructured catalysts have attracted the increased attention for biomass conversion into high-valued chemicals due to the rapid depletion of fossil resources and increasingly severe environmental issues. Supercritical carbon dioxide (scCO2) fluid is an attractive medium for synthesizing nanostructured materials due to its favorable properties. In this review, the properties of scCO2 and the rol… ▽ More Nanostructured catalysts have attracted the increased attention for biomass conversion into high-valued chemicals due to the rapid depletion of fossil resources and increasingly severe environmental issues. Supercritical carbon dioxide (scCO2) fluid is an attractive medium for synthesizing nanostructured materials due to its favorable properties. In this review, the properties of scCO2 and the roles of scCO2 in the fabrication of metal nanoparticles were assessed in detailed. A general overview of the synthesis of different types of metal nanoparticles (including metal oxide nanoparticles) using scCO2 and the relationship between the structure of the obtained metal nanoparticles and the preparation conditions such as reaction temperature and pressure, types of metal precursors, and deposition time are system summarized and compared in tables. Besides, compared to the meatal catalysts using the conventional methods, the catalysts obtained using scCO2 exhibited excellent catalytic performance on biomass conversion reactions, mainly focused on oxidation, hydrogenation reactions. Finally, opportunities and challenges of metal nanoparticle preparation using scCO2 for biomass valorization to chemicals and liquid fuels are highlighted. This review could be helpful for the rational design of more efficient metal catalysts for the selective synthesis of fine chemicals and fuels from biomass-derived chemicals. △ Less

Submitted 25 March, 2024; originally announced March 2024.

Comments: 66 pages, 21 figures

Highly dispersed Ru nanoparticles anchored on NiAl layered double oxides catalyst for selective hydrodeoxygenation of vanillin

Authors: Yongjian Zeng, Lu Lin, Di Hu, Zhiwei Jiang, Shaimaa Saeed, Ruichao Guo, Ibrahim Ashour, Kai Yan

Abstract: The hydrodeoxygenation (HDO) of lignin-derived feedstocks into value-added chemicals with high efficiency and selectivity is desirable for the utilization of biomass resource. The complex oxygen-containing groups of lignin-derived substance result in the challenge of the low selectivity toward the required product. In this work, highly dispersed Ru nanoparticles anchored on Ni3Al1 layered double o… ▽ More The hydrodeoxygenation (HDO) of lignin-derived feedstocks into value-added chemicals with high efficiency and selectivity is desirable for the utilization of biomass resource. The complex oxygen-containing groups of lignin-derived substance result in the challenge of the low selectivity toward the required product. In this work, highly dispersed Ru nanoparticles anchored on Ni3Al1 layered double oxides (LDOs) catalyst derived from NiAl layered double hydroxides (LDHs) with flower-shaped morphology was constructed by a simple deposition-reduction method. The introduction of LDHs-derived support can significantly impact the catalytic activity for the HDO of lignin-derived vanillin (VL) into 2-methoxy-4-methylphenol (MMP). The Ru/Ni3Al1-400 catalyst obtained complete conversion of VL and 94.2% yield of MMP at 130 °C in methanol solvent, much better than the catalysts without LDHs-derived support. The methanol solvent is beneficial for the conversion of reaction intermediate of vanillin alcohol (VA). Detailed characterization reveals that the existence of the enhanced metal-support interaction over Ru/Ni3Al1-400 and the easily accessible acid sites facilitate the production of MMP. △ Less

Submitted 25 March, 2024; originally announced March 2024.

The status and challenges for prostate SBRT treatments in United States proton therapy centers: An NRG Oncology practice survey

Authors: Jiajian Shen, Paige A. Taylor, Carlos E. Vargas, Minglei Kang, Jatinder Saini, Jun Zhou, Peilong Wang, Wei Liu, Charles B. Simone II, Ying Xiao, Liyong Lin

Abstract: A survey was designed to inquire about the practice of proton SBRT treatment for prostate cancer. The survey was distributed to all 30 proton therapy centers in the United States that participate in the National Clinical Trial Network in Feb. 2023. The survey focused on usage, patient selection criteria, prescriptions, target contours, dose constraints, treatment plan optimization and evaluation m… ▽ More A survey was designed to inquire about the practice of proton SBRT treatment for prostate cancer. The survey was distributed to all 30 proton therapy centers in the United States that participate in the National Clinical Trial Network in Feb. 2023. The survey focused on usage, patient selection criteria, prescriptions, target contours, dose constraints, treatment plan optimization and evaluation methods, patient-specific QA, and IGRT methods. Results: We received responses from 25 centers (83% participation). Only 8 respondent proton centers (32%) reported performing SBRT of the prostate. The remaining 17 centers cited three primary reasons for not offering this treatment: no clinical need, lack of volumetric imaging, and/or lack of clinical evidence. Only 1 center cited the reduction in overall reimbursement as a concern for not offering prostate SBRT. Several common practices among the 8 centers offering SBRT for the prostate were noted, such as using Hydrogel spacers, fiducial markers, and MRI for target delineation. Most proton centers (87.5%) utilized pencil beam scanning (PBS) delivery and completed Imaging and Radiation Oncology Core (IROC) phantom credentialing. Treatment planning typically used parallel opposed lateral beams, and consistent parameters for setup and range uncertainties were used for plan optimization and robustness evaluation. Measurements-based patient-specific QA, beam delivery every other day, fiducial contours for IGRT, and total doses of 35-40 GyRBE were consistent across all centers. However, there was no consensus on the risk levels for patient selection. Conclusion: Prostate SBRT is used in about 1/3 of proton centers in the US. There was a significant consistency in practices among proton centers treating with proton SBRT. It is possible that the adoption of proton SBRT may become more common if proton SBRT is more commonly offered in clinical trials. △ Less

Submitted 27 February, 2024; originally announced February 2024.

An Overview of the Development of Stereotactic Body Radiation Therapy

Authors: Yanqi Zong, Zhengrong Cui, Luqi Lin, Sihao Wang, Yizhi Chen

Abstract: Stereotactic body radiation therapy (SBRT) refers to focusing high-energy rays in three-dimensional space on the tumor lesion area, reducing the dose received by surrounding normal tissues, which can effectively improve the local control rate of the tumor and reduce the probability of complications. With the comprehensive development of medical imaging, radiation biology and other disciplines, thi… ▽ More Stereotactic body radiation therapy (SBRT) refers to focusing high-energy rays in three-dimensional space on the tumor lesion area, reducing the dose received by surrounding normal tissues, which can effectively improve the local control rate of the tumor and reduce the probability of complications. With the comprehensive development of medical imaging, radiation biology and other disciplines, this less-fractional, high-dose radiotherapy method has been increasingly developed and applied in clinical practice. The background, radio-biological basis, key technologies and main equipment of SBRT are discussed, and its future development direction is prospected. △ Less

Submitted 26 February, 2024; originally announced February 2024.

The Staggered Mesh Method: Accurate Exact Exchange towards the Thermodynamic Limit for Solids

Authors: Stephen Jon Quiton, Hamlin Wu, Xin Xing, Lin Lin, Martin Head-Gordon

Abstract: In periodic systems, the Hartree-Fock (HF) exchange energy exhibits the slowest convergence of all HF energy components as the system size approaches the thermodynamic limit. We demonstrate that the recently proposed staggered mesh method for Fock exchange energy [Xing, Li, and Lin, Math. Comp., 2024], which is specifically designed to sidestep certain singularities in exchange energy evaluation,… ▽ More In periodic systems, the Hartree-Fock (HF) exchange energy exhibits the slowest convergence of all HF energy components as the system size approaches the thermodynamic limit. We demonstrate that the recently proposed staggered mesh method for Fock exchange energy [Xing, Li, and Lin, Math. Comp., 2024], which is specifically designed to sidestep certain singularities in exchange energy evaluation, can expedite the finite-size convergence rate for the exact exchange energy across a range of insulators and semiconductors when compared to the regular and truncated Coulomb methods. This remains true even for two computationally cheaper versions of this new method, which we call Non-SCF and Split-SCF staggered mesh. Additionally, a sequence of numerical tests on simple solids showcases the staggered mesh method's ability to improve convergence towards the thermodynamic limit for band gaps, bulk moduli, equilibrium lattice dimensions, energies, and phonon force constants. △ Less

Submitted 21 February, 2024; originally announced February 2024.

Comments: 31 pages, 12 figures, submitted to the Journal of Chemical Theory and Computation

Proton Pencil-Beam Scanning Stereotactic Body Radiation Therapy and Hypofractionated Radiation Therapy for Thoracic Malignancies: Patterns of Practice Survey and Recommendations for Future Development from NRG Oncology and PTCOG

Authors: Wei Liu, Hongying Feng, Paige A. Taylor, Minglei Kang, Jiajian Shen, Jatinder Saini, Jun Zhou, Huan B. Giap, Nathan Y. Yu, Terence S. Sio, Pranshu Mohindra, Joe Y. Chang, Jeffrey D. Bradley, Ying Xiao, Charles B. Simone II, Liyong Lin

Abstract: Stereotactic body radiation therapy (SBRT) and hypofractionation using pencil-beam scanning (PBS) proton therapy (PBSPT) is an attractive option for thoracic malignancies. Combining the advantages of target coverage conformity and critical organ sparing from both PBSPT and SBRT, this new delivery technique has great potential to improve the therapeutic ratio, particularly for tumors near critical… ▽ More Stereotactic body radiation therapy (SBRT) and hypofractionation using pencil-beam scanning (PBS) proton therapy (PBSPT) is an attractive option for thoracic malignancies. Combining the advantages of target coverage conformity and critical organ sparing from both PBSPT and SBRT, this new delivery technique has great potential to improve the therapeutic ratio, particularly for tumors near critical organs. Safe and effective implementation of PBSPT SBRT/hypofractionation to treat thoracic malignancies is more challenging than the conventionally-fractionated PBSPT due to concerns of amplified uncertainties at the larger dose per fraction. NRG Oncology and Particle Therapy Cooperative Group (PTCOG) Thoracic Subcommittee surveyed US proton centers to identify practice patterns of thoracic PBSPT SBRT/hypofractionation. From these patterns, we present recommendations for future technical development of proton SBRT/hypofractionation for thoracic treatment. Amongst other points, the recommendations highlight the need for volumetric image guidance and multiple CT-based robust optimization and robustness tools to minimize further the impact of uncertainties associated with respiratory motion. Advances in direct motion analysis techniques are urgently needed to supplement current motion management techniques. △ Less

Submitted 1 February, 2024; originally announced February 2024.

Comments: 36 pages, 4 figures, 4 tables

Validation of Classical Transport Cross Section for Ion-Ion Interactions Under Repulsive Yukawa Potential

Authors: Tian-Xing Hu, Dong Wu, C. L. Lin, Z. M. Sheng, B. He, J. Zhang

Abstract: Value of cross section is a fundamental parameter to depict the transport of charged particles in matters. Due to masses of orders of magnitude higher than electrons and convenience of realistic calculation, the cross section of elastic nuclei-nuclei collision is usually treated via classical mechanics. The famous Bohr criterion was firstly proposed to judge whether the treatment via classical mec… ▽ More Value of cross section is a fundamental parameter to depict the transport of charged particles in matters. Due to masses of orders of magnitude higher than electrons and convenience of realistic calculation, the cross section of elastic nuclei-nuclei collision is usually treated via classical mechanics. The famous Bohr criterion was firstly proposed to judge whether the treatment via classical mechanics is reliable or not. Later, Lindhard generalized the results of Coulomb to screening potentials. Considering the increasing importance of detailed ion-ion interactions under modern simulation codes in inertial confinement fusion (ICF) researches, the validation of classical transport cross section for ion-ion interactions in a big range of parameter space is certainly required. In this work, the transport cross sections via classical mechanics under repulsive Yukawa potential are compared with those via quantum mechanics. Differences of differential cross sections are found with respect to scattering angles and velocities. Our results generally indicate that the classical picture fails at the cases of both low and high velocities, which represent a significant extension of the famous Bohr criterion and its generalized variations. Furthermore, the precise validation zones of classical picture is also analysed in this work. This work is of significant importance for benchmarking the modern ion-kinetic simulation codes in ICF researches, concerning the stopping power of $α$ particles in DT fuels, ion-ion friction and viscous effects in the formation of kinetic shocks. △ Less

Submitted 22 January, 2024; originally announced January 2024.

A Kaczmarz-inspired approach to accelerate the optimization of neural network wavefunctions

Authors: Gil Goldshlager, Nilin Abrahamsen, Lin Lin

Abstract: Neural network wavefunctions optimized using the variational Monte Carlo method have been shown to produce highly accurate results for the electronic structure of atoms and small molecules, but the high cost of optimizing such wavefunctions prevents their application to larger systems. We propose the Subsampled Projected-Increment Natural Gradient Descent (SPRING) optimizer to reduce this bottlene… ▽ More Neural network wavefunctions optimized using the variational Monte Carlo method have been shown to produce highly accurate results for the electronic structure of atoms and small molecules, but the high cost of optimizing such wavefunctions prevents their application to larger systems. We propose the Subsampled Projected-Increment Natural Gradient Descent (SPRING) optimizer to reduce this bottleneck. SPRING combines ideas from the recently introduced minimum-step stochastic reconfiguration optimizer (MinSR) and the classical randomized Kaczmarz method for solving linear least-squares problems. We demonstrate that SPRING outperforms both MinSR and the popular Kronecker-Factored Approximate Curvature method (KFAC) across a number of small atoms and molecules, given that the learning rates of all methods are optimally tuned. For example, on the oxygen atom, SPRING attains chemical accuracy after forty thousand training iterations, whereas both MinSR and KFAC fail to do so even after one hundred thousand iterations. △ Less

Submitted 18 January, 2024; originally announced January 2024.

Tunable terahertz photodetector using ferroelectric-integrated graphene plasmonics for portable spectrometer

Authors: Lin Lin, Junxiong Guo, Shangdong Li, Tianxun Gong, Juan Xia, Zenghui Wang, Jun Tang, Yang Zhang, Jinxing Zhang, Yuan Lin, Wen Huang, Xiaosheng Zhang

Abstract: Terahertz (THz) detector has great potential for use in imaging, spectroscopy, and communications due to its fascinating interactions between radiation and matter. However, current THz detection devices have limitations in sensitivity, operating frequency range, and bulky footprint. While recent ferroelectric-integrated graphene plasmonic devices show promise in overcoming these limitations, they… ▽ More Terahertz (THz) detector has great potential for use in imaging, spectroscopy, and communications due to its fascinating interactions between radiation and matter. However, current THz detection devices have limitations in sensitivity, operating frequency range, and bulky footprint. While recent ferroelectric-integrated graphene plasmonic devices show promise in overcoming these limitations, they are not yet extended to the THz range. Here, we propose a wavelength-sensitive terahertz detector that uses a single layer graphene integrated onto the ferroelectric thin film with patterned polarization domains. This device works at room temperature, with high responsivity and detectivity by coupling graphene plasmons with THz frequencies through spatial modulation of carrier behaviors using ferroelectric polarization, without requiring additional local electrodes. By reconfiguring an interweaving squared ferroelectric domain array with alternating upward and downward polarizations to highly confine graphene surface plasmon polaritons, our device achieves an ultrahigh responsivity of 1717 A W-1 and a normalized detectivity of 1.07*10^13 Jones at a resonance frequency of 6.30 THz and a 0.3 V bias voltage. We also show that the device makes possible for spectrum reconstruction application of portable spectrometer combining the mathematical algorithms. △ Less

Submitted 11 January, 2024; originally announced January 2024.

Comments: 17 pages, 5 figures

Roadmap on Perovskite Light-Emitting Diodes

Authors: Ziming Chen, Robert L. Z. Hoye, Hin-Lap Yip, Nadesh Fiuza-Maneiro, Iago López-Fernández, Clara Otero-Martínez, Lakshminarayana Polavarapu, Navendu Mondal, Alessandro Mirabelli, Miguel Anaya, Samuel D. Stranks, Hui Liu, Guangyi Shi, Zhengguo Xiao, Nakyung Kim, Yunna Kim, Byungha Shin, Jinquan Shi, Mengxia Liu, Qianpeng Zhang, Zhiyong Fan, James C. Loy, Lianfeng Zhao, Barry P. Rand, Habibul Arfin , et al. (18 additional authors not shown)

Abstract: In recent years, the field of metal-halide perovskite emitters has rapidly emerged as a new community in solid-state lighting. Their exceptional optoelectronic properties have contributed to the rapid rise in external quantum efficiencies (EQEs) in perovskite light-emitting diodes (PeLEDs) from <1% (in 2014) to approaching 30% (in 2023) across a wide range of wavelengths. However, several challeng… ▽ More In recent years, the field of metal-halide perovskite emitters has rapidly emerged as a new community in solid-state lighting. Their exceptional optoelectronic properties have contributed to the rapid rise in external quantum efficiencies (EQEs) in perovskite light-emitting diodes (PeLEDs) from <1% (in 2014) to approaching 30% (in 2023) across a wide range of wavelengths. However, several challenges still hinder their commercialization, including the relatively low EQEs of blue/white devices, limited EQEs in large-area devices, poor device stability, as well as the toxicity of the easily accessible lead components and the solvents used in the synthesis and processing of PeLEDs. This roadmap addresses the current and future challenges in PeLEDs across fundamental and applied research areas, by sharing the community's perspectives. This work will provide the field with practical guidelines to advance PeLED development and facilitate more rapid commercialization. △ Less

Submitted 19 November, 2023; originally announced November 2023.

Comments: 103 pages, 29 figures. This is the version of the article before peer review or editing, as submitted by an author to Journal of Physics: Photonics. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it

Emergence of odd elasticity in a microswimmer using deep reinforcement learning

Authors: Li-Shing Lin, Kento Yasuda, Kenta Ishimoto, Shigeyuki Komura

Abstract: We use the Deep Q-Network with reinforcement learning to investigate the emergence of odd elasticity in an elastic microswimmer model. For an elastic microswimmer, it is challenging to obtain the optimized dynamics due to the intricate elastohydrodynamic interactions. However, our machine-trained model adopts a novel transition strategy (the waiting behavior) to optimize the locomotion. For the tr… ▽ More We use the Deep Q-Network with reinforcement learning to investigate the emergence of odd elasticity in an elastic microswimmer model. For an elastic microswimmer, it is challenging to obtain the optimized dynamics due to the intricate elastohydrodynamic interactions. However, our machine-trained model adopts a novel transition strategy (the waiting behavior) to optimize the locomotion. For the trained microswimmers, we evaluate the performance of the cycles by the product of the loop area (called non-reciprocality) and the loop frequency, and show that the average swimming velocity is proportional to the performance. By calculating the force-displacement correlations, we obtain the effective odd elasticity of the microswimmer to characterize its non-reciprocal dynamics. This emergent odd elasticity is shown to be closely related to the loop frequency of the cyclic deformation. Our work demonstrates the utility of machine learning in achieving optimal dynamics for elastic microswimmers and introduces post-analysis methods to extract crucial physical quantities such as non-reciprocality and odd elasticity. △ Less

Submitted 7 June, 2024; v1 submitted 3 November, 2023; originally announced November 2023.

Calculations of Chern number: equivalence of real-space and twisted-boundary-condition formulae

Authors: Ling Lin, Yongguan Ke, Li Zhang, Chaohong Lee

Abstract: Chern number is a crucial invariant for characterizing topological feature of two-dimensional quantum systems. Real-space Chern number allows us to extract topological properties of systems without involving translational symmetry, and hence plays an important role in investigating topological systems with disorder or impurity. On the other hand, the twisted boundary condition (TBC) can also be us… ▽ More Chern number is a crucial invariant for characterizing topological feature of two-dimensional quantum systems. Real-space Chern number allows us to extract topological properties of systems without involving translational symmetry, and hence plays an important role in investigating topological systems with disorder or impurity. On the other hand, the twisted boundary condition (TBC) can also be used to define the Chern number in the absence of translational symmetry. Based on the perturbative nature of the TBC under appropriate gauges, we derive the two real-space formulae of Chern number (namely the non-commutative Chern number and the Bott index formula), which are numerically confirmed for the Chern insulator and the quantum spin Hall insulator. Our results not only establish the equivalence between the real-space and TBC formula of the Chern number, but also provide concrete and instructive examples for deriving the real-space topological invariant through the twisted boundary condition. △ Less

Submitted 7 November, 2023; v1 submitted 8 August, 2023; originally announced August 2023.

Comments: none

Acoustic diagnostics of femtosecond laser filamentation

Authors: Binpeng Shang, Nan Zhang, Pengfei Qi, Shishi Tao, Lie Lin, Weiwei Liu

Abstract: The promising application of femtosecond laser filamentation in atmospheric remote sensing brings imperative demand for diagnosing the spatiotemporal dynamics of filamentation. Acoustic emission (AE) during filamentation opens a door to give the insight into the dynamic evolution of filaments in air. In particular, the frequency features of the acoustic emission provide relevant information on the… ▽ More The promising application of femtosecond laser filamentation in atmospheric remote sensing brings imperative demand for diagnosing the spatiotemporal dynamics of filamentation. Acoustic emission (AE) during filamentation opens a door to give the insight into the dynamic evolution of filaments in air. In particular, the frequency features of the acoustic emission provide relevant information on the conversion of laser energy to acoustic energy. Here, the acoustic emission of femtosecond laser filament manipulated by energy and the focal lengths was measured quantitatively by a broadband microphone, and the acoustic parameters were compared and analyzed. Our results showed that the acoustic power presents a squared dependence on the laser energy and the bandwidth of the acoustic spectrum showed a significant positive correlation with laser energy deposition. It was found that the spectrum of the acoustic pulse emitted from the middle of the filament has a larger bandwidth compared to those emitted from the ends of the filament and the spectrum of the acoustic pulse is also an indicator of the filament intensity distribution. These findings are helpful for studying the plasma filament properties and complex dynamic processes through acoustic parameters and allow the optimization of remote applications. △ Less

Submitted 10 July, 2023; originally announced July 2023.

Comments: 8 pages,5 figures

MSC Class: 78A60 ACM Class: J.2.9

A physics-constrained machine learning method for mapping gapless land surface temperature

Authors: Jun Ma, Huanfeng Shen, Menghui Jiang, Liupeng Lin, Chunlei Meng, Chao Zeng, Huifang Li, Penghai Wu

Abstract: More accurate, spatio-temporally, and physically consistent LST estimation has been a main interest in Earth system research. Developing physics-driven mechanism models and data-driven machine learning (ML) models are two major paradigms for gapless LST estimation, which have their respective advantages and disadvantages. In this paper, a physics-constrained ML model, which combines the strengths… ▽ More More accurate, spatio-temporally, and physically consistent LST estimation has been a main interest in Earth system research. Developing physics-driven mechanism models and data-driven machine learning (ML) models are two major paradigms for gapless LST estimation, which have their respective advantages and disadvantages. In this paper, a physics-constrained ML model, which combines the strengths in the mechanism model and ML model, is proposed to generate gapless LST with physical meanings and high accuracy. The hybrid model employs ML as the primary architecture, under which the input variable physical constraints are incorporated to enhance the interpretability and extrapolation ability of the model. Specifically, the light gradient-boosting machine (LGBM) model, which uses only remote sensing data as input, serves as the pure ML model. Physical constraints (PCs) are coupled by further incorporating key Community Land Model (CLM) forcing data (cause) and CLM simulation data (effect) as inputs into the LGBM model. This integration forms the PC-LGBM model, which incorporates surface energy balance (SEB) constraints underlying the data in CLM-LST modeling within a biophysical framework. Compared with a pure physical method and pure ML methods, the PC-LGBM model improves the prediction accuracy and physical interpretability of LST. It also demonstrates a good extrapolation ability for the responses to extreme weather cases, suggesting that the PC-LGBM model enables not only empirical learning from data but also rationally derived from theory. The proposed method represents an innovative way to map accurate and physically interpretable gapless LST, and could provide insights to accelerate knowledge discovery in land surface processes and data mining in geographical parameter estimation. △ Less

Submitted 2 July, 2023; originally announced July 2023.

Fully general relativistic simulations of rapidly rotating quark stars: Oscillation modes and universal relations

Authors: Kenneth Chen, Lap-Ming Lin

Abstract: (Abridged) Numerical simulation of strange quark stars (QSs) is challenging due to the strong density discontinuity at the stellar surface. In this paper, we report successful simulations of rapidly rotating QSs and study their oscillation modes in full general relativity. Building on top of the numerical relativity code \texttt{Einstein Toolkit}, we implement a positivity-preserving Riemann solve… ▽ More (Abridged) Numerical simulation of strange quark stars (QSs) is challenging due to the strong density discontinuity at the stellar surface. In this paper, we report successful simulations of rapidly rotating QSs and study their oscillation modes in full general relativity. Building on top of the numerical relativity code \texttt{Einstein Toolkit}, we implement a positivity-preserving Riemann solver and a dust-like atmosphere to handle the density discontinuity at the surface. We demonstrate the robustness of our numerical method by performing stable evolutions of rotating QSs close to the Keplerian limit and extracting their oscillation modes. We focus on the quadrupolar $l=|m|=2$ $f$-mode and study whether they can still satisfy the universal relations recently proposed for rotating neutron stars (NSs). We find that two of the three proposed relations can still be satisfied by rotating QSs. For the remaining broken relation, we propose a new relation to unify the NS and QS data by invoking the dimensionless spin parameter $j$. The onsets of secular instabilities for rotating QSs are also studied by analyzing the $f$-mode frequencies. Same as the result found previously for NSs, we find that QSs become unstable to the Chandrasekhar-Friedman-Schutz instability when the angular velocity of the star $Ω\approx 3.4 σ_0$ for sequences of constant central energy density, where $σ_0$ is the mode frequency of the corresponding nonrotating configurations. For the viscosity-driven instability, we find that QSs become unstable when $j\approx 0.881$ for both sequences of constant central energy density and constant baryon mass. Such a high value of $j$ cannot be achieved by realistic rotating NSs before reaching the Keplerian limit. △ Less

Submitted 1 September, 2023; v1 submitted 4 July, 2023; originally announced July 2023.

Comments: 22 pages, 20 figures

Journal ref: Phys. Rev. D 108, 064007 (2023)

Nanotips for 0.5THz scattering scanning near field microscopy

Authors: Zeliang Zhang, Pengfei Qi, Olga Kosavera, Cheng Gong, Lie Lin, Weiwei Liu

Abstract: This manuscript demonstrates the theory, design, and simulation of scattering scanning near field microscopy (s-SNOM) in 0.5THz. A comprehensive simulation model of nanotips' geometry, sample materials, and incident field is established to significantly improve the scattering efficiency and spatial resolution to achieve optimal performance. The theoretical model is based on full-wave simulation an… ▽ More This manuscript demonstrates the theory, design, and simulation of scattering scanning near field microscopy (s-SNOM) in 0.5THz. A comprehensive simulation model of nanotips' geometry, sample materials, and incident field is established to significantly improve the scattering efficiency and spatial resolution to achieve optimal performance. The theoretical model is based on full-wave simulation and dipole moment analysis which can describe the overall nanotip's geometry information to screen the optimal parameters corresponding to the 0.5THz, which is the center frequency of most THz sources. The customized nanotip can achieve 40 nm $(λ/ 15000)$ spatial resolution while maintaining an excellent scattering efficiency. This nanotip design method doesn't depend on the homogenization commercial AFM tips, providing an approach for customized nanotip design of THz wave scattering near field microscopy. △ Less

Submitted 3 July, 2023; originally announced July 2023.

Comments: 11page, 8figures

Analysis of laser polarization state on remote induced plasma luminescence characteristics of filament in air

Authors: Yuezheng Wang, Zhi Zhang, Zeliang Zhang, Nan Zhang, Lie Lin, Weiwei Liu

Abstract: The femtosecond laser filamentation is the result of the dynamic interplay between plasma self-focusing and defocusing generated by the multiphoton/tunnel ionization of air molecules. This equilibrium allows the filament to stably propagate over long distances at high power densities, making it a promising tool for remote sensing in chemical and biological applications, detection of air pollution,… ▽ More The femtosecond laser filamentation is the result of the dynamic interplay between plasma self-focusing and defocusing generated by the multiphoton/tunnel ionization of air molecules. This equilibrium allows the filament to stably propagate over long distances at high power densities, making it a promising tool for remote sensing in chemical and biological applications, detection of air pollution, and lightning control, which has attracted wide attention. Laser-induced filamentation is a highly nonlinear process, and initial conditions such as changes in polarization state can affect the fluorescence emission of N2 molecules excited by the filament in air. In this article, we analyze in detail the effect of polarization state changes on the 337 nm fluorescence signal excited by the filament at a distance of 30 m. It was found that the fluorescence signal intensity of the linear polarization state was higher than that of the circular polarization state. Through analysis of these phenomena, we explore the mechanism of plasma fluorescence emission during the long-range filamentation process of femtosecond laser, including the electron collision model and the polarization effect on the critical power for filamentation. These findings are important for the understanding of the stimulated radiation from filaments and may find applications in remote sensing of electric field and THz radiation. △ Less

Submitted 2 July, 2023; originally announced July 2023.

Comments: 11 pages, 3 figures

Ab initio quantum many-body description of superconducting trends in the cuprates

Authors: Zhi-Hao Cui, Junjie Yang, Johannes Tölle, Hong-Zhou Ye, Huanchen Zhai, Raehyun Kim, Xing Zhang, Lin Lin, Timothy C. Berkelbach, Garnet Kin-Lic Chan

Abstract: Using a systematic ab initio quantum many-body approach that goes beyond low-energy models, we directly compute the superconducting pairing order of several doped cuprate materials and structures. We find that we can correctly capture two well-known trends: the pressure effect, where pairing order increases with intra-layer pressure, and the layer effect, where the pairing order varies with the nu… ▽ More Using a systematic ab initio quantum many-body approach that goes beyond low-energy models, we directly compute the superconducting pairing order of several doped cuprate materials and structures. We find that we can correctly capture two well-known trends: the pressure effect, where pairing order increases with intra-layer pressure, and the layer effect, where the pairing order varies with the number of copper-oxygen layers. From these calculations, we observe that the strength of superexchange and the covalency at optimal doping are the best descriptors of the maximal pairing order. Our microscopic analysis further identifies short-range copper spin fluctuations, together with multi-orbital charge fluctuations, as central to the pairing trends. Our work illustrates the possibility of a quantitative computational understanding of unconventional high-temperature superconducting materials. △ Less

Submitted 12 July, 2023; v1 submitted 28 June, 2023; originally announced June 2023.

Comments: 10 pages, 5 figures, with supplementary materials

Femtosecond Laser Filamentation in Atmospheric Turbulence

Authors: Jiewei Guo, Lu Sun, Yuezheng Wang, Jiayun Xue, Zhi Zhang, Haiyi Liu, Shishi Tao, Pengfei Qi, Lie Lin, Weiwei Liu

Abstract: The effects of turbulence intensity and turbulence region on the distribution of femtosecond laser filaments are experimentally elaborated. Through the ultrasonic signals emitted by the filaments, and it is observed that increasing turbulence intensity and expanding turbulence active region cause an increase in the start position of the filament, and a decrease in filament length, which can be wel… ▽ More The effects of turbulence intensity and turbulence region on the distribution of femtosecond laser filaments are experimentally elaborated. Through the ultrasonic signals emitted by the filaments, and it is observed that increasing turbulence intensity and expanding turbulence active region cause an increase in the start position of the filament, and a decrease in filament length, which can be well explained by the theoretical calculation. It is also observed that the random perturbation of the air refractive index caused by atmospheric turbulence expanded the spot size of the filament. Additionally, when turbulence intensity reaches , multiple filaments are formed. Furthermore, the standard deviation of the transverse displacement of filament is found to be proportional to the square root of turbulent structure constant under the experimental turbulence parameters in this paper. These results contribute to the study of femtosecond laser propagation mechanisms in complex atmospheric turbulence conditions △ Less

Submitted 26 June, 2023; originally announced June 2023.

Comments: 9 pages, 4 figures

Single-shot 3D photoacoustic computed tomography with a densely packed array for transcranial functional imaging

Authors: Rui Cao, Yilin Luo, Jinhua Xu, Xiaofei Luo, Ku Geng, Yousuf Aborahama, Manxiu Cui, Samuel Davis, Shuai Na, Xin Tong, Cindy Liu, Karteek Sastry, Konstantin Maslov, Peng Hu, Yide Zhang, Li Lin, Yang Zhang, Lihong V. Wang

Abstract: Photoacoustic computed tomography (PACT) is emerging as a new technique for functional brain imaging, primarily due to its capabilities in label-free hemodynamic imaging. Despite its potential, the transcranial application of PACT has encountered hurdles, such as acoustic attenuations and distortions by the skull and limited light penetration through the skull. To overcome these challenges, we hav… ▽ More Photoacoustic computed tomography (PACT) is emerging as a new technique for functional brain imaging, primarily due to its capabilities in label-free hemodynamic imaging. Despite its potential, the transcranial application of PACT has encountered hurdles, such as acoustic attenuations and distortions by the skull and limited light penetration through the skull. To overcome these challenges, we have engineered a PACT system that features a densely packed hemispherical ultrasonic transducer array with 3072 channels, operating at a central frequency of 1 MHz. This system allows for single-shot 3D imaging at a rate equal to the laser repetition rate, such as 20 Hz. We have achieved a single-shot light penetration depth of approximately 9 cm in chicken breast tissue utilizing a 750 nm laser (withstanding 3295-fold light attenuation and still retaining an SNR of 74) and successfully performed transcranial imaging through an ex vivo human skull using a 1064 nm laser. Moreover, we have proven the capacity of our system to perform single-shot 3D PACT imaging in both tissue phantoms and human subjects. These results suggest that our PACT system is poised to unlock potential for real-time, in vivo transcranial functional imaging in humans. △ Less

Submitted 26 June, 2023; originally announced June 2023.

Coupled air lasing gain and Mie scattering loss: aerosol effect in filament-induced plasma spectroscopy

Authors: Jiayun Xue, Zhi Zhang, Yuezheng Wang, Binpeng Shang, Jiewei Guo, Shishi Tao, Nan Zhang, Lanjunguo, Pengfei Qi, Lie Lin, Weiwei Liu

Abstract: Femtosecond laser filament-induced plasma spectroscopy (FIPS) demonstrates great potentials in the remote sensing for identifying atmospheric pollutant molecules. Due to the widespread aerosols in atmosphere, the remote detection based on FIPS would be affected from both the excitation and the propagation of fingerprint fluorescence, which still remain elusive. Here the physical model of filament-… ▽ More Femtosecond laser filament-induced plasma spectroscopy (FIPS) demonstrates great potentials in the remote sensing for identifying atmospheric pollutant molecules. Due to the widespread aerosols in atmosphere, the remote detection based on FIPS would be affected from both the excitation and the propagation of fingerprint fluorescence, which still remain elusive. Here the physical model of filament-induced aerosol fluorescence is established to reveal the combined effect of Mie scattering and amplification spontaneous emission, which is then proved by the experimental results, the dependence of the backward fluorescence on the interaction length between filament and aerosols. These findings provide an insight into the complicated aerosol effect in the overall physical process of FIPS including propagation, excitation and emission, paving the way to its practical application in atmospheric remote sensing. △ Less

Submitted 22 June, 2023; originally announced June 2023.

Comments: 7 pages, 4 figures

Magnetic Resonance Spectroscopy Quantification Aided by Deep Estimations of Imperfection Factors and Macromolecular Signal

Authors: Dicheng Chen, Meijin Lin, Huiting Liu, Jiayu Li, Yirong Zhou, Taishan Kang, Liangjie Lin, Zhigang Wu, Jiazheng Wang, Jing Li, Jianzhong Lin, Xi Chen, Di Guo, Xiaobo Qu

Abstract: Objective: Magnetic Resonance Spectroscopy (MRS) is an important technique for biomedical detection. However, it is challenging to accurately quantify metabolites with proton MRS due to serious overlaps of metabolite signals, imperfections because of non-ideal acquisition conditions, and interference with strong background signals mainly from macromolecules. The most popular method, LCModel, adopt… ▽ More Objective: Magnetic Resonance Spectroscopy (MRS) is an important technique for biomedical detection. However, it is challenging to accurately quantify metabolites with proton MRS due to serious overlaps of metabolite signals, imperfections because of non-ideal acquisition conditions, and interference with strong background signals mainly from macromolecules. The most popular method, LCModel, adopts complicated non-linear least square to quantify metabolites and addresses these problems by designing empirical priors such as basis-sets, imperfection factors. However, when the signal-to-noise ratio of MRS signal is low, the solution may have large deviation. Methods: Linear Least Squares (LLS) is integrated with deep learning to reduce the complexity of solving this overall quantification. First, a neural network is designed to explicitly predict the imperfection factors and the overall signal from macromolecules. Then, metabolite quantification is solved analytically with the introduced LLS. In our Quantification Network (QNet), LLS takes part in the backpropagation of network training, which allows the feedback of the quantification error into metabolite spectrum estimation. This scheme greatly improves the generalization to metabolite concentrations unseen for training compared to the end-to-end deep learning method. Results: Experiments show that compared with LCModel, the proposed QNet, has smaller quantification errors for simulated data, and presents more stable quantification for 20 healthy in vivo data at a wide range of signal-to-noise ratio. QNet also outperforms other end-to-end deep learning methods. Conclusion: This study provides an intelligent, reliable and robust MRS quantification. Significance: QNet is the first LLS quantification aided by deep learning. △ Less

Submitted 9 October, 2023; v1 submitted 16 June, 2023; originally announced June 2023.

Remote Sensing of Trace Element in Sea Salt Aerosol with Sensitivity Level of 10 pg/m3

Authors: Yuezheng Wang, Nan Zhang, Jiayun Xue, Bingpeng Shang, Jiewei Guo, Zhi Zhang, Pengfei Qi, Lie Lin, Weiwei Liu

Abstract: Sea salt aerosols composed mainly of micrometer-sized sodium chloride particles not only pose a potential threat to human health and traffic safety, but also directly affect climate prediction. The long-range and high-precision sensing of sea salt aerosols remains a challenge for existing composition analysis methods. As the development of ultrashort laser technology, femtosecond laser filamentati… ▽ More Sea salt aerosols composed mainly of micrometer-sized sodium chloride particles not only pose a potential threat to human health and traffic safety, but also directly affect climate prediction. The long-range and high-precision sensing of sea salt aerosols remains a challenge for existing composition analysis methods. As the development of ultrashort laser technology, femtosecond laser filamentation provides a new opportunity for molecular remote sensing in complex environments. However, the accuracy at long-distance of this method is still hard to meet the demand (<10 ng/m3) for the remote aerosol monitoring. To solve this problem, we built a remote detection system for sea salt aerosol fluorescence spectroscopy and obtained a very high system sensitivity by introducing a terawatt-class high-performance femtosecond laser and optimizing the filament and aerosol interaction length. The system achieves a Na+ detection limit of 0.015 ng/m3 at a detection distance of 30 m, and 0.006 ng/m3 when supplemented with a deep processing learning algorithm. △ Less

Submitted 9 June, 2023; originally announced June 2023.

Comments: 13 pages, 3 figures

Filament based Ionizing Radiation Sensing Technology

Authors: Weiwei Liu, Jiewei Guo, Nan Zhang, Lu Sun, Haiyi Liu, Shihi Tao, Yuezheng Wang, Binpeng Shang, Pengfei Qi, Lie Lin

Abstract: Accidental exposure to overdose ionizing radiation will inevitably lead to severe biological damage, thus detecting and localizing radiation is essential. Traditional measurement techniques are generally restricted to the limited detection range of few centimeters, posing a great risk to operators. The potential in remote sensing makes femtosecond laser filament technology great candidates for con… ▽ More Accidental exposure to overdose ionizing radiation will inevitably lead to severe biological damage, thus detecting and localizing radiation is essential. Traditional measurement techniques are generally restricted to the limited detection range of few centimeters, posing a great risk to operators. The potential in remote sensing makes femtosecond laser filament technology great candidates for constructively address this challenge. Here we propose a novel filament-based ionizing radiation sensing technology (FIRST), and clarify the interaction mechanism between filaments and ionizing radiation. Specifically, it is demonstrated that the energetic electrons and ions produced by α radiation in air can be effectively accelerated within the filament, serving as seed electrons, which will markedly enhance nitrogen fluorescence. The extended nitrogen fluorescence lifetime of ~1 ns is also observed. These findings provide insights into the intricate interaction among ultra-strong light filed, plasma and energetic particle beam, and pave the way for the remote sensing of ionizing radiation. △ Less

Submitted 9 June, 2023; originally announced June 2023.

Comments: 13 pages, 6 figures

First Scan Search for Dark Photon Dark Matter with a Tunable Superconducting Radio-Frequency Cavity

Authors: SHANHE Collaboration, Zhenxing Tang, Bo Wang, Yifan Chen, Yanjie Zeng, Chunlong Li, Yuting Yang, Liwen Feng, Peng Sha, Zhenghui Mi, Weimin Pan, Tianzong Zhang, Yirong Jin, Jiankui Hao, Lin Lin, Fang Wang, Huamu Xie, Senlin Huang, Jing Shu

Abstract: Dark photons have emerged as promising candidates for dark matter, and their search is a top priority in particle physics, astrophysics, and cosmology. We report the first use of a tunable niobium superconducting radio-frequency cavity for a scan search of dark photon dark matter with innovative data analysis techniques. We mechanically adjusted the resonant frequency of a cavity submerged in liqu… ▽ More Dark photons have emerged as promising candidates for dark matter, and their search is a top priority in particle physics, astrophysics, and cosmology. We report the first use of a tunable niobium superconducting radio-frequency cavity for a scan search of dark photon dark matter with innovative data analysis techniques. We mechanically adjusted the resonant frequency of a cavity submerged in liquid helium at a temperature of $2$ K, and scanned the dark photon mass over a frequency range of $1.37$ MHz centered at $1.3$ GHz. Our study leveraged the superconducting radio-frequency cavity's remarkably high quality factors of approximately $10^{10}$, resulting in the most stringent constraints to date on a substantial portion of the exclusion parameter space on the kinetic mixing coefficient $ε$ between dark photons and electromagnetic photons, yielding a value of $ε< 2.2 \times 10^{-16}$. △ Less

Submitted 13 July, 2024; v1 submitted 16 May, 2023; originally announced May 2023.

Comments: 14 pages, 7 figures, accepted for publication in PRL

Fluid--structure interactions of bristled wings: The trade-off between weight and drag

Authors: Yuexia Luna Lin, Matteo Pezzulla, Pedro M. Reis

Abstract: The smallest flying insects often have bristled wings resembling feathers or combs. We combined experiments and three-dimensional numerical simulations to investigate the trade-off between wing weight and drag generation. In experiments of bristled strips, a reduced physical model of the bristled wing, we found that the elasto-viscous number indicates when reconfiguration occurs in the bristles. A… ▽ More The smallest flying insects often have bristled wings resembling feathers or combs. We combined experiments and three-dimensional numerical simulations to investigate the trade-off between wing weight and drag generation. In experiments of bristled strips, a reduced physical model of the bristled wing, we found that the elasto-viscous number indicates when reconfiguration occurs in the bristles. Analysis of existing biological data suggested that bristled wings of miniature insects lie below the reconfiguration threshold, thus avoiding drag reduction. Numerical simulations of bristled strips showed that there exist optimal numbers of bristles that maximize the weighted drag when the additional volume due to the bristles is taken into account. We found a scaling relationship between the rescaled optimal numbers and the dimensionless bristle length. This result agrees qualitatively with and provides an upper bound for the bristled wing morphological data analyzed in this study. △ Less

Submitted 15 August, 2023; v1 submitted 8 May, 2023; originally announced May 2023.

Comments: 14 pages, 7 figures

Anti-scattering medium computational ghost imaging with modified Hadamard patterns

Authors: Li-Xing Lin, Jie Cao, Qun Hao

Abstract: Illumination patterns of computational ghost imaging (CGI) systems suffer from reduced contrast when passing through a scattering medium, which causes the effective information in the reconstruction result to be drowned out by noise. A two-dimensional (2D) Gaussian filter performs linear smoothing operation on the whole image for image denoising. It can be combined with linear reconstruction algor… ▽ More Illumination patterns of computational ghost imaging (CGI) systems suffer from reduced contrast when passing through a scattering medium, which causes the effective information in the reconstruction result to be drowned out by noise. A two-dimensional (2D) Gaussian filter performs linear smoothing operation on the whole image for image denoising. It can be combined with linear reconstruction algorithms of CGI to obtain the noise-reduced results directly, without post-processing. However, it results in blurred image edges while performing denoising and, in addition, a suitable standard deviation is difficult to choose in advance, especially in an unknown scattering environment. In this work, we subtly exploit the characteristics of CGI to solve these two problems very well. A kind of modified Hadamard pattern based on the 2D Gaussian filter and the differential operation features of Hadamard-based CGI is developed. We analyze and demonstrate that using Hadamard patterns for illumination but using our developed modified Hadamard patterns for reconstruction (MHCGI) can enhance the robustness of CGI against turbid scattering medium. Our method not only helps directly obtain noise-reduced results without blurred edges but also requires only an approximate standard deviation, i.e., it can be set in advance. The experimental results on transmitted and reflected targets demonstrate the feasibility of our method. Our method helps to promote the practical application of CGI in the scattering environment. △ Less

Submitted 15 April, 2023; originally announced April 2023.

Comments: 14 pages, 7 figures

Inverse Volume Scaling of Finite-Size Error in Periodic Coupled Cluster Theory

Authors: Xin Xing, Lin Lin

Abstract: Coupled cluster theory is one of the most popular post-Hartree-Fock methods for ab initio molecular quantum chemistry. The finite-size error of the correlation energy in periodic coupled cluster calculations for three-dimensional insulating systems has been observed to satisfy the inverse volume scaling, even in the absence of any correction schemes. This is surprising, as simpler theories that ut… ▽ More Coupled cluster theory is one of the most popular post-Hartree-Fock methods for ab initio molecular quantum chemistry. The finite-size error of the correlation energy in periodic coupled cluster calculations for three-dimensional insulating systems has been observed to satisfy the inverse volume scaling, even in the absence of any correction schemes. This is surprising, as simpler theories that utilize only a subset of the coupled cluster diagrams exhibit much slower decay of the finite-size error, which scales inversely with the length of the system. In this study, we review the current understanding of finite-size error in quantum chemistry methods for periodic systems. We introduce new tools that elucidate the mechanisms behind this phenomenon in the context of coupled cluster doubles calculations. This reconciles some seemingly paradoxical statements related to finite-size scaling. Our findings also show that singularity subtraction can be a powerful method to effectively reduce finite-size errors in practical quantum chemistry calculations for periodic systems. △ Less

Submitted 31 March, 2024; v1 submitted 6 April, 2023; originally announced April 2023.

MSC Class: 65D32; 41A55; 81V70

Convergence of variational Monte Carlo simulation and scale-invariant pre-training

Authors: Nilin Abrahamsen, Zhiyan Ding, Gil Goldshlager, Lin Lin

Abstract: We provide theoretical convergence bounds for the variational Monte Carlo (VMC) method as applied to optimize neural network wave functions for the electronic structure problem. We study both the energy minimization phase and the supervised pre-training phase that is commonly used prior to energy minimization. For the energy minimization phase, the standard algorithm is scale-invariant by design,… ▽ More We provide theoretical convergence bounds for the variational Monte Carlo (VMC) method as applied to optimize neural network wave functions for the electronic structure problem. We study both the energy minimization phase and the supervised pre-training phase that is commonly used prior to energy minimization. For the energy minimization phase, the standard algorithm is scale-invariant by design, and we provide a proof of convergence for this algorithm without modifications. The pre-training stage typically does not feature such scale-invariance. We propose using a scale-invariant loss for the pretraining phase and demonstrate empirically that it leads to faster pre-training. △ Less

Submitted 4 July, 2024; v1 submitted 21 March, 2023; originally announced March 2023.

Comments: Update to JCP version

A novel inverse algorithm to solve IPO-IMPT of proton FLASH therapy with sparse filters

Authors: Nathan Harrison, Minglei Kang, Ruirui Liu, Serdar Charyyev, Niklas Wahl, Wei Liu, Jun Zhou, Kristin A. Higgins, Charles Simone, Jeffrey Bradley, William S. Dynan, Liyong Lin

Abstract: Purpose:The recently proposed IPO-IMPT framework allows simultaneous optimization of dose, dose rate, and LET for FLASH treatment planning. Finding solutions to IPO-IMPT is difficult due to computational intensiveness. Nevertheless, an inverse solution that simultaneously specifies the geometry of a sparse filter and weights of a proton intensity map is desirable for both clinical and preclinical… ▽ More Purpose:The recently proposed IPO-IMPT framework allows simultaneous optimization of dose, dose rate, and LET for FLASH treatment planning. Finding solutions to IPO-IMPT is difficult due to computational intensiveness. Nevertheless, an inverse solution that simultaneously specifies the geometry of a sparse filter and weights of a proton intensity map is desirable for both clinical and preclinical applications. Such solutions can reduce effective biological dose to organs at risk in cancer patients as well as reduce the number of animal irradiations needed to derive extra biological dose models in preclinical studies. Methods:Unlike our initial forward heuristic, this inverse IPO-IMPT solution includes simultaneous optimization of sparse range compensation, sparse range modulation, and spot intensity. The daunting computational tasks vital to this endeavor were resolved iteratively with a distributed computing framework to enable Simultaneous Intensity and Energy Modulation and Compensation (SIEMAC). SIEMAC was demonstrated on a human lung cancer patient and a minipig. Results:SIEMAC improves maps of spot intensities and patient-field-specific sparse range compensators and range modulators. For the lung cancer patient, at our max nozzle current of 300 nA, dose rate coverage above 100 Gy/s increased from 57% to 96% in the lung and from 93% to 100% in the heart, and LET coverage above 4 keV/um dropped from 68% to 9% in the lung and from 26% to <1% in the heart. For a simple minipig plan, the FWHM of the dose, dose rate, and LET distributions decreased by 30%, 1.6%, and 57%, respectively, again with similar target dose coverage, thus reducing uncertainty in these quantities for preclinical studies. Conclusion:The inverse solution to IPO-IMPT demonstrated the capability to simultaneously modulate sub-spot proton energy and intensity distributions for clinical and preclinical studies. △ Less

Submitted 19 April, 2023; v1 submitted 22 February, 2023; originally announced February 2023.

Finite-size effects in periodic coupled cluster calculations

Authors: Xin Xing, Lin Lin

Abstract: We provide the first rigorous study of the finite-size error in the simplest and representative coupled cluster theory, namely the coupled cluster doubles (CCD) theory, for gapped periodic systems. Assuming that the CCD equations are solved using exact Hartree-Fock orbitals and orbital energies, we prove that the convergence rate of finite-size error scales as… ▽ More We provide the first rigorous study of the finite-size error in the simplest and representative coupled cluster theory, namely the coupled cluster doubles (CCD) theory, for gapped periodic systems. Assuming that the CCD equations are solved using exact Hartree-Fock orbitals and orbital energies, we prove that the convergence rate of finite-size error scales as $\mathscr{O}(N_\mathbf{k}^{-\frac13})$, where $N_{\mathbf{k}}$ is the number of discretization point in the Brillouin zone and characterizes the system size. Our analysis shows that the dominant error lies in the coupled cluster amplitude calculation, and the convergence of the finite-size error in energy calculations can be boosted to $\mathscr{O}(N_\mathbf{k}^{-1})$ with accurate amplitudes. This also provides the first proof of the scaling of the finite-size error in the third order Møller-Plesset perturbation theory (MP3) for periodic systems. △ Less

Submitted 12 February, 2023; originally announced February 2023.

MSC Class: 81Q99; 65G99; 65D32

Journal ref: Journal of Computational Physics (2024): 112755

Sub-ppb aerosol detection at a distance of 30 meters by millijoule femtosecond laser pulse filamentation in air

Authors: Jiewei Guo, Zhi Zhang, Nan Zhang, Binpeng Shang, Jiayun Xue, Yuezheng Wang, Shishi Tao, Bofu Xie, Lanjun Guo, Lie Lin, Weiwei Liu

Abstract: In this work, sub-ppb aerosol detection is achieved by femtosecond laser filament with a single pulse energy of 4 mJ at a distance of 30 m. A concave mirror with an open aperture of 41.4 cm is employed in an off-axis optical system to focus the femtosecond laser beam and collect the fluorescence of NaCl aerosol. The simulation and experimental results show that the astigmatism can be greatly reduc… ▽ More In this work, sub-ppb aerosol detection is achieved by femtosecond laser filament with a single pulse energy of 4 mJ at a distance of 30 m. A concave mirror with an open aperture of 41.4 cm is employed in an off-axis optical system to focus the femtosecond laser beam and collect the fluorescence of NaCl aerosol. The simulation and experimental results show that the astigmatism can be greatly reduced when femtosecond laser beam is incident non-symmetrically on the concave mirror. Compared with the case that femtosecond laser strikes at the center of the concave mirror, the intensity of the optical filament is increased by 69.5 times, and the detection of limit of sodium chloride aerosol is reduced by 86%, which is down to 0.32 ppb. The improved excitation scheme in this work utilizes the nonsymmetrical beam spot on the concave mirror to compensate the non-symmetry induced by the off-axis setup, reducing the astigmatism of the focusing laser beam and improving the aerosol's detection of limit. △ Less

Submitted 26 January, 2023; originally announced January 2023.

Validation of the Quantum Physics Processes Underlying the Integrated Optimization of Proton FLASH Radiotherapy

Authors: Nathan Harrison, Serdar Charyyev, Cristina Oancea, Alexander Stanforth, Shuang Zhou, William Dynan, Tiezhi Zhang, Steven Biegalski, Liyong Lin

Abstract: FLASH is a new treatment modality that requires optimization of dose, dose rate, and LET. Here we validate these three quantities under FLASH conditions, which includes the quantum uncertainty in the time-dependent instantaneous dose rate (IDR) curves and LET spectra that underlie the newly proposed integrated optimization framework. Measurements of dose, IDR, and LET were performed at the Emory… ▽ More FLASH is a new treatment modality that requires optimization of dose, dose rate, and LET. Here we validate these three quantities under FLASH conditions, which includes the quantum uncertainty in the time-dependent instantaneous dose rate (IDR) curves and LET spectra that underlie the newly proposed integrated optimization framework. Measurements of dose, IDR, and LET were performed at the Emory Proton Therapy Center using a FLASH proton beam with a nominal energy of 250 MeV and a 3D printed ridge filter. Because 3D printing resin is made from a proprietary chemical formula, we developed a method for realistically characterizing and modeling the material in simulations. Absolute dose in 3D space was measured using a 2D MatriXX PT detector as well as by a novel 4D multi-layer strip ionization chamber (MLSIC), which also simultaneously measures IDR. Further timing data was measured in the secondary beam by detecting prompt gammas using a Minipix Timepix3; a second detector, Advapix Timepix3, was used to measure LET. To account for the quantum mechanical nature of particle transport, we developed a technique for detecting individual protons within a high flux primary beam, which was necessary for properly measuring LET spectra. TOPAS simulations agreed with measurement, with absolute dose typically having a gamma passing rate of at least 95% (3 mm/3% criteria). Likewise, IDR and LET showed good agreement, with averaged IDR values agreeing within 0.3% with fluctuations on the order of 10%, and LET distributions overlapping by at least 85% and showing an increase in high LET components (greater than 4 keV/um) with increasing depth. As LET and FLASH optimization continues to grow in popularity, measuring IDR, LET, and dose will become even more important, and we expect that the methods described here will prove to be useful tools in radiotherapy treatment planning and QA. △ Less

Submitted 19 December, 2022; originally announced December 2022.

Interacting models for twisted bilayer graphene: a quantum chemistry approach

Authors: Fabian M. Faulstich, Kevin D. Stubbs, Qinyi Zhu, Tomohiro Soejima, Rohit Dilip, Huanchen Zhai, Raehyun Kim, Michael P. Zaletel, Garnet Kin-Lic Chan, Lin Lin

Abstract: The nature of correlated states in twisted bilayer graphene (TBG) at the magic angle has received intense attention in recent years. We present a numerical study of an interacting Bistritzer-MacDonald (IBM) model of TBG using a suite of methods in quantum chemistry, including Hartree-Fock, coupled cluster singles, doubles (CCSD), and perturbative triples (CCSD(T)), as well as a quantum chemistry f… ▽ More The nature of correlated states in twisted bilayer graphene (TBG) at the magic angle has received intense attention in recent years. We present a numerical study of an interacting Bistritzer-MacDonald (IBM) model of TBG using a suite of methods in quantum chemistry, including Hartree-Fock, coupled cluster singles, doubles (CCSD), and perturbative triples (CCSD(T)), as well as a quantum chemistry formulation of the density matrix renormalization group method (DMRG). Our treatment of TBG is agnostic to gauge choices, and hence we present a new gauge-invariant formulation to detect the spontaneous symmetry breaking in interacting models. To benchmark our approach, we focus on a simplified spinless, valleyless IBM model. At integer filling ($ν=0$), all numerical methods agree in terms of energy and $C_{2z} \mathcal{T}$ symmetry breaking. Additionally, as part of our benchmarking, we explore the impact of different schemes for removing ``double-counting'' in the IBM model. Our results at integer filling suggest that cross-validation of different IBM models may be needed for future studies of the TBG system. After benchmarking our approach at integer filling, we perform the first systematic study of the IBM model near integer filling (for $|ν|< 0.2$). In this regime, we find that the ground state can be in a metallic and $C_{2z} \mathcal{T}$ symmetry breaking phase. The ground state appears to have low entropy, and therefore can be relatively well approximated by a single Slater determinant. Furthermore, we observe many low entropy states with energies very close to the ground state energy in the near integer filling regime. △ Less

Submitted 16 November, 2022; originally announced November 2022.

Conformational change-modulated spin transport at the single-molecule level in carbon systems --Invited for the Third Carbon Special Topic

Authors: Yan-Dong Guo, Xue Zhao, Hong-Ru Zhao, Li Yang, Li-Yan Lin, Yue Jiang, Dan Ma, Yu-Ting Chen, Xiao-Hong Yan

Abstract: Controlling the spin transport at the single-molecule level, especially without the use of ferromagnetic contacts, becomes a focus of research in spintronics. Inspired by the progress on atomic-level molecular synthesis, through first-principles calculations, we investigate the spin-dependent electronic transport of graphene nanoflakes with side-bonded functional groups, contacted by atomic carbon… ▽ More Controlling the spin transport at the single-molecule level, especially without the use of ferromagnetic contacts, becomes a focus of research in spintronics. Inspired by the progress on atomic-level molecular synthesis, through first-principles calculations, we investigate the spin-dependent electronic transport of graphene nanoflakes with side-bonded functional groups, contacted by atomic carbon chain electrodes. It is found that, by rotating the functional group, the spin polarization of the transmission at the Fermi level could be switched between completely polarized and unpolarized states. Moreover, the transition between spin-up and spin-down polarized states can also be achieved, operating as a dual-spin filter. Further analysis shows that, it is the spin-dependent shift of density of states, caused by the rotation, that triggers the shift of transmission peaks, and then results in the variation of spin polarization. Such a feature is found to be robust to the of the nanoflake and the electrode material, showing great application potential. Those findings may throw light on the development of spintronic devices. △ Less

Submitted 16 November, 2022; originally announced November 2022.

Hamiltonian Transformation for Band Structure Calculations

Authors: Kai Wu, Yingzhou Li, Wentiao Wu, Lin Lin, Wei Hu, Jinlong Yang

Abstract: First-principles electronic band structure calculations are essential for understanding periodic systems in condensed matter physics and materials science. We propose an accurate and parameter-free method, called Hamiltonian transformation (HT), to calculate band structures in both density functional theory (DFT) and post-DFT calculations with plane-wave basis sets. The cost of HT is independent o… ▽ More First-principles electronic band structure calculations are essential for understanding periodic systems in condensed matter physics and materials science. We propose an accurate and parameter-free method, called Hamiltonian transformation (HT), to calculate band structures in both density functional theory (DFT) and post-DFT calculations with plane-wave basis sets. The cost of HT is independent of the choice of the density functional and scales as $\mathcal{O}(N_e^3N_k\log N_k)$, where $N_e$ and $N_k$ are the number of electrons and the number of $\mathbf{k}$-points. Compared to the widely used Wannier interpolation (WI), HT adopts an eigenvalue transformation to construct a spatial localized representation of the spectrally truncated Hamiltonian. HT also uses a non-iterative algorithm to change the basis sets to circumvent the construction of the maximally localized Wannier functions. As a result, HT can significantly outperform WI in terms of the accuracy of the band structure calculation. We also find that the eigenvalue transformation can be of independent interest, and can be used to improve the accuracy of the WI for systems with entangled bands. △ Less

Submitted 5 November, 2022; originally announced November 2022.

Comments: 5 pages, 4 figures

Input optics systems of the KAGRA detector during O3GK

Authors: T. Akutsu, M. Ando, K. Arai, Y. Arai, S. Araki, A. Araya, N. Aritomi, H. Asada, Y. Aso, S. Bae, Y. Bae, L. Baiotti, R. Bajpai, M. A. Barton, K. Cannon, Z. Cao, E. Capocasa, M. Chan, C. Chen, K. Chen, Y. Chen, C-I. Chiang, H. Chu, Y-K. Chu, S. Eguchi , et al. (228 additional authors not shown)

Abstract: KAGRA, the underground and cryogenic gravitational-wave detector, was operated for its solo observation from February 25th to March 10th, 2020, and its first joint observation with the GEO 600 detector from April 7th -- 21st, 2020 (O3GK). This study presents an overview of the input optics systems of the KAGRA detector, which consist of various optical systems, such as a laser source, its intensit… ▽ More KAGRA, the underground and cryogenic gravitational-wave detector, was operated for its solo observation from February 25th to March 10th, 2020, and its first joint observation with the GEO 600 detector from April 7th -- 21st, 2020 (O3GK). This study presents an overview of the input optics systems of the KAGRA detector, which consist of various optical systems, such as a laser source, its intensity and frequency stabilization systems, modulators, a Faraday isolator, mode-matching telescopes, and a high-power beam dump. These optics were successfully delivered to the KAGRA interferometer and operated stably during the observations. The laser frequency noise was observed to limit the detector sensitivity above a few kHz, whereas the laser intensity did not significantly limit the detector sensitivity. △ Less

Submitted 12 October, 2022; originally announced October 2022.

Robust analytic continuation of Green's functions via projection, pole estimation, and semidefinite relaxation

Authors: Zhen Huang, Emanuel Gull, Lin Lin

Abstract: Green's functions of fermions are described by matrix-valued Herglotz-Nevanlinna functions. Since analytic continuation is fundamentally an ill-posed problem, the causal space described by the matrix-valued Herglotz-Nevanlinna structure can be instrumental in improving the accuracy and in enhancing the robustness with respect to noise. We demonstrate a three-pronged procedure for robust analytic c… ▽ More Green's functions of fermions are described by matrix-valued Herglotz-Nevanlinna functions. Since analytic continuation is fundamentally an ill-posed problem, the causal space described by the matrix-valued Herglotz-Nevanlinna structure can be instrumental in improving the accuracy and in enhancing the robustness with respect to noise. We demonstrate a three-pronged procedure for robust analytic continuation called PES: (1) Projection of data to the causal space. (2) Estimation of pole locations. (3) Semidefinite relaxation within the causal space. We compare the performance of PES with the recently developed Nevanlinna and Carathéodory continuation methods and find that PES is more robust in the presence of noise and does not require the usage of extended precision arithmetics. We also demonstrate that a causal projection improves the performance of the Nevanlinna and Carathéodory methods. The PES method is generalized to bosonic response functions, for which the Nevanlinna and Carathéodory continuation methods have not yet been developed. It is particularly useful for studying spectra with sharp features, as they occur in the study of molecules and band structures in solids. △ Less

Submitted 9 October, 2022; originally announced October 2022.

Comments: 14 pages, 5 figures

Deep learning-based Fast Volumetric Image Generation for Image-guided Proton FLASH Radiotherapy

Authors: Chih-Wei Chang, Yang Lei, Tonghe Wang, Sibo Tian, Justin Roper, Liyong Lin, Jeffrey Bradley, Tian Liu, Jun Zhou, Xiaofeng Yang

Abstract: Proton FLASH therapy leverages ultra-high dose-rate radiation to enhance the sparing of organs at risk without compromising tumor control probability. To prepare for the delivery of high doses to targets, we aim to develop a deep learning-based image-guide framework to enable fast volumetric image reconstruction for accurate target localization before FLSAH beam delivery. The proposed framework co… ▽ More Proton FLASH therapy leverages ultra-high dose-rate radiation to enhance the sparing of organs at risk without compromising tumor control probability. To prepare for the delivery of high doses to targets, we aim to develop a deep learning-based image-guide framework to enable fast volumetric image reconstruction for accurate target localization before FLSAH beam delivery. The proposed framework comprises four modules, including orthogonal kV x-ray projection acquisition, DL-based volumetric image generation, image quality analyses, and water equivalent thickness evaluation. We investigated volumetric image reconstruction using four kV projection pairs with different source angles. Thirty lung patients were identified from the institutional database, and each patient contains a four-dimensional computed tomography dataset with ten respiratory phases. The retrospective patient study indicated that the proposed framework could reconstruct patient volumetric anatomy, including tumors and organs at risk from orthogonal x-ray projections. Considering all evaluation metrics, the kV projections with source angles of 135 and 225 degrees yielded the optimal volumetric images. The proposed framework has been demonstrated to reconstruct volumetric images with accurate lesion locations from two orthogonal x-ray projections. The embedded WET module can be used to detect potential proton beam-specific patient anatomy variations. The framework can deliver fast volumetric image generation and can potentially guide treatment delivery systems for proton FLASH therapy. △ Less

Submitted 27 October, 2022; v1 submitted 3 October, 2022; originally announced October 2022.

FusionRetro: Molecule Representation Fusion via In-Context Learning for Retrosynthetic Planning

Authors: Songtao Liu, Zhengkai Tu, Minkai Xu, Zuobai Zhang, Lu Lin, Rex Ying, Jian Tang, Peilin Zhao, Dinghao Wu

Abstract: Retrosynthetic planning aims to devise a complete multi-step synthetic route from starting materials to a target molecule. Current strategies use a decoupled approach of single-step retrosynthesis models and search algorithms, taking only the product as the input to predict the reactants for each planning step and ignoring valuable context information along the synthetic route. In this work, we pr… ▽ More Retrosynthetic planning aims to devise a complete multi-step synthetic route from starting materials to a target molecule. Current strategies use a decoupled approach of single-step retrosynthesis models and search algorithms, taking only the product as the input to predict the reactants for each planning step and ignoring valuable context information along the synthetic route. In this work, we propose a novel framework that utilizes context information for improved retrosynthetic planning. We view synthetic routes as reaction graphs and propose to incorporate context through three principled steps: encode molecules into embeddings, aggregate information over routes, and readout to predict reactants. Our approach is the first attempt to utilize in-context learning for retrosynthesis prediction in retrosynthetic planning. The entire framework can be efficiently optimized in an end-to-end fashion and produce more practical and accurate predictions. Comprehensive experiments demonstrate that by fusing in the context information over routes, our model significantly improves the performance of retrosynthetic planning over baselines that are not context-aware, especially for long synthetic routes. Code is available at https://github.com/SongtaoLiu0823/FusionRetro. △ Less

Submitted 31 May, 2023; v1 submitted 30 September, 2022; originally announced September 2022.

Comments: Accepted by ICML 2023

Feasibility Study of Hybrid Inverse Planning with Transmission Beams and Single-energy Spread-out Bragg Peaks for Proton Flash Radiotherapy

Authors: Chaoqiong Ma, Xiaofeng Yang, Chih-Wei Chang, Ruirui Liu, Duncan Bohannon, Liyong Lin, Tian Liu, Sibo Tian, Jun Zhou

Abstract: Ultra-high dose rate (FLASH) proton planning with only transmission beams (TBs) has limitations in normal tissue sparing. The single-energy spread-out Bragg peaks (SESOBPs) of FLASH dose rate have been demonstrated feasible for proton FLASH planning. A hybrid inverse optimization method was developed to combine the TBs and SESOBPs (TB-SESOBP) for FLASH planning. The SESOBPs were generated from spr… ▽ More Ultra-high dose rate (FLASH) proton planning with only transmission beams (TBs) has limitations in normal tissue sparing. The single-energy spread-out Bragg peaks (SESOBPs) of FLASH dose rate have been demonstrated feasible for proton FLASH planning. A hybrid inverse optimization method was developed to combine the TBs and SESOBPs (TB-SESOBP) for FLASH planning. The SESOBPs were generated from spreading out the BPs by pre-designed general bar ridge filters and placed at the central target by range shifters to obtain a uniform dose within the target. The SESOBPs and TBs were fully sampled field-by-field allowing automatic spot selection and weighting in the optimization process. The TB-SESOBP plans were validated in comparison with the TB only (TB-only) plans and the plans with the combination of TBs and BPs (TB-BP) regarding 3D dose and dose rate distributions for five lung cases. Comparing to the TB-only plans, the mean spinal cord D1.2cc drastically reduced 41%, the mean lung V7Gy and V7.4Gy moderately reduced by up to 17% and the target dose homogeneity slightly increased in the TB-SESOBP plans. Comparable dose homogeneity was achieved in both TB-SESOBP and TB-BP plans. Besides, prominent improvements were achieved in lung sparing for the cases of relatively large targets by the TB-SESOBP plans comparing to the TB-BP plans. The targets were fully covered with the FLASH dose rate in all the three plans. For the OARs, V40Gy/s = 100% was achieved by the TB-only plans while V40Gy/s > 85% was obtained by the other two plans. We have demonstrated that the hybrid TB-SESOBP planning was feasible to achieve FLASH dose rate for proton therapy. The hybrid TB-SESOBP planning has great potential in improving OAR sparing while maintaining high target dose homogeneity, and can be potentially implemented for adaptive radiotherapy. △ Less

Submitted 13 September, 2022; originally announced September 2022.

Measurement of the time structure of FLASH beams using prompt gamma rays and secondary neutrons as surrogates

Authors: Serdar Charyyev, Ruirui Liu, Xiaofeng Yang, Jun Zhou, Anees Dhabaan, William S. Dynan, Cristina Oancea, Liyong Lin

Abstract: We aim to investigate the feasibility of online monitoring of irradiation time (IRT) and scan time for FLASH radiotherapy using a pixelated semiconductor detector. Measurements of the time structure of FLASH irradiations were performed using fast, pixelated spectral detectors, AdvaPIX-TPX3 and Minipix-TPX3. The latter has a fraction of its sensor coated with a neutron sensitive material. With litt… ▽ More We aim to investigate the feasibility of online monitoring of irradiation time (IRT) and scan time for FLASH radiotherapy using a pixelated semiconductor detector. Measurements of the time structure of FLASH irradiations were performed using fast, pixelated spectral detectors, AdvaPIX-TPX3 and Minipix-TPX3. The latter has a fraction of its sensor coated with a neutron sensitive material. With little or no dead time and an ability to resolve events that are closely spaced in time (tens of ns), both detectors can accurately determine IRTs as long as pile-ups are avoided. To avoid pile-ups, we placed the detectors beyond the Bragg peak or at a large scattering angle. We acquired prompt gamma rays and secondary neutrons and calculated IRTs based on timestamps of the first (beam-on) and the last (beam-off) charged species. We also measured scan times in x, y, and diagonal directions. We performed these measurements for a single spot, a small animal field, a patient field, and a ridge filter optimized field to demonstrate in vivo online monitoring of IRT. All measurements were compared to vendor log files. Differences between measurements and log files for a single spot, a small animal field, and a patient field were within 1%, 0.3% and 1%, respectively. In vivo monitoring of IRTs was accurate within 0.1% for AdvaPIX-TPX3 and within 6.1% for Minipix-TPX3. The scan times in x, y, and diagonal directions were 4.0, 3.4, and 4.0 ms, respectively. Overall, the AdvaPIX-TPX3 can measure FLASH IRTs within 1% accuracy, indicating that prompt gamma rays are a good surrogate for primary protons. The Minipix-TPX3 showed a higher discrepancy, suggesting a need for further investigation. The scan times (3.4 \pm 0.05 ms) in the 60-mm distance of y-direction were less than (4.0 \pm 0.06 ms) in the 24-mm distance of x-direction, confirming the much faster scanning speed of the Y magnets than that of X. △ Less

Submitted 2 September, 2022; originally announced September 2022.

Comments: 11 pages, 5 figures

CCAT-prime: Optical and cryogenic design of the 850 GHz module for Prime-Cam

Authors: Anthony I. Huber, Scott C. Chapman, Adrian K. Sinclair, Locke D. Spencer, Jason E. Austermann, Steve K. Choi, Jesslyn Devina, Patricio A. Gallardo, Doug Henke, Zachary B. Huber, Ben Keller, Yaqiong Li, Lawrence T. Lin, Mike Niemack, Kayla M. Rossi, Eve M. Vavagiakis, Jordan D. Wheeler

Abstract: Prime-Cam is a first-generation instrument for the Cerro Chajnantor Atacama Telescope-prime (CCAT-prime) Facility. The 850$~$GHz module for Prime-Cam will probe the highest frequency of all the instrument modules. We describe the parameter space of the 850$~$GHz optical system between the F$λ$ spacing, beam size, pixel sensitivity, and detector count. We present the optimization of an optical desi… ▽ More Prime-Cam is a first-generation instrument for the Cerro Chajnantor Atacama Telescope-prime (CCAT-prime) Facility. The 850$~$GHz module for Prime-Cam will probe the highest frequency of all the instrument modules. We describe the parameter space of the 850$~$GHz optical system between the F$λ$ spacing, beam size, pixel sensitivity, and detector count. We present the optimization of an optical design for the 850$~$GHz instrument module for CCAT-prime. We further describe the development of the cryogenic RF chain design to accommodate $>$30 readout lines to read 41,400 kinetic inductance detectors (KIDs) within the cryogenic testbed. △ Less

Submitted 19 August, 2022; originally announced August 2022.

Comments: 12 pages, 7 figures

Characterization of 250 MeV protons from Varian ProBeam pencil beam scanning system for FLASH radiation therapy

Authors: Serdar Charyyev, Chih-Wei Chang, Mingyao Zhu, Liyong Lin, Katja Langen, Anees Dhabaan

Abstract: Recently, shoot-through proton FLASH has been proposed where the highest energy is extracted from the cyclotron to maximize the dose rate (DR). Even though our proton pencil beam scanning system can deliver 250 MeV (the highest energy), it is not typical to use 250 MeV protons for routine clinical treatments and as such 250 MeV may not have been characterized in the commissioning. In this study, w… ▽ More Recently, shoot-through proton FLASH has been proposed where the highest energy is extracted from the cyclotron to maximize the dose rate (DR). Even though our proton pencil beam scanning system can deliver 250 MeV (the highest energy), it is not typical to use 250 MeV protons for routine clinical treatments and as such 250 MeV may not have been characterized in the commissioning. In this study, we aim to characterize 250 MeV protons from Varian ProBeam system for FLASH RT as well as assess the ability of clinical monitoring ionization chamber (MIC) for FLASH-readiness. We measured data needed for beam commissioning: integral depth dose (IDD) curve, spot sigma, and absolute dose calibration. To evaluate MIC, we measured output as a function of beam current. To characterize a 250 MeV FLASH beam, we measured: (1) central axis DR as a function of current and spot spacing and arrangement, (2) for a fixed spot spacing, the maximum field size that still achieves FLASH DR (i.e., > 40 Gy/s), (3) DR reproducibility. All FLASH DR measurements were performed using ion chamber for the absolute dose and irradiation times were obtained from log files. We verified dose measurements using EBT-XD films and irradiation times using a fast, pixelated spectral detector. R90 and R80 from IDD were 37.58 and 37.69 cm, and spot sigma at isocenter were σx=3.336 and σy=3.332 mm, respectively. The absolute dose output was measured as 0.377 GyE*mm2/MU for the commissioning conditions. Output was stable for beam currents up to 15 nA, and it gradually increased to 12-fold for 115 nA. DR depended on beam current, spot spacing and arrangement and could be reproduced within 4.2% variations. Even though FLASH was achieved and the largest field size that delivers FLASH DR was determined as 35x35 mm2, current MIC has DR dependence and users should measure DR each time for their FLASH applications. △ Less

Submitted 25 January, 2023; v1 submitted 9 August, 2022; originally announced August 2022.

Comments: 11 pages, 6 figures

Is there evidence for exponential quantum advantage in quantum chemistry?

Authors: Seunghoon Lee, Joonho Lee, Huanchen Zhai, Yu Tong, Alexander M. Dalzell, Ashutosh Kumar, Phillip Helms, Johnnie Gray, Zhi-Hao Cui, Wenyuan Liu, Michael Kastoryano, Ryan Babbush, John Preskill, David R. Reichman, Earl T. Campbell, Edward F. Valeev, Lin Lin, Garnet Kin-Lic Chan

Abstract: The idea to use quantum mechanical devices to simulate other quantum systems is commonly ascribed to Feynman. Since the original suggestion, concrete proposals have appeared for simulating molecular and materials chemistry through quantum computation, as a potential ``killer application''. Indications of potential exponential quantum advantage in artificial tasks have increased interest in this ap… ▽ More The idea to use quantum mechanical devices to simulate other quantum systems is commonly ascribed to Feynman. Since the original suggestion, concrete proposals have appeared for simulating molecular and materials chemistry through quantum computation, as a potential ``killer application''. Indications of potential exponential quantum advantage in artificial tasks have increased interest in this application, thus, it is critical to understand the basis for potential exponential quantum advantage in quantum chemistry. Here we gather the evidence for this case in the most common task in quantum chemistry, namely, ground-state energy estimation. We conclude that evidence for such an exponential advantage across chemical space has yet to be found. While quantum computers may still prove useful for quantum chemistry, it may be prudent to assume exponential speedups are not generically available for this problem. △ Less

Submitted 14 November, 2022; v1 submitted 3 August, 2022; originally announced August 2022.

Journal ref: Nat Commun 14, 1952 (2023)