-
First Test Results of the Trans-Impedance Amplifier Stage of the Ultra-fast HPSoC ASIC
Authors:
C. Chock,
K. Flood,
L. Macchiarulo,
I. Mostafanezhad,
R. Perron,
D. Uehara,
F. Martinez-Mckinney,
A. Martinez- Rojas,
S. Mazza,
M. Nizam,
J. Ott,
E. Ryan,
H. F. -W. Sadrozinski,
B. Schumm,
A. Seiden,
K. Shin,
M. Tarka,
M. Wilder,
Y. Zhao
Abstract:
We present the first results from the HPSoC ASIC designed for readout of Ultra-fast Silicon Detectors. The 4-channel ASIC manufactured in 65 nm CMOS by TSMC has been optimized for 50 um thick AC-LGAD. The evaluation of the analog front end with \b{eta}-particles impinging on 3x3 AC-LGAD arrays (500 um pitch, 200x200 um2 metal) confirms a fast output rise time of 600 ps and good timing performance…
▽ More
We present the first results from the HPSoC ASIC designed for readout of Ultra-fast Silicon Detectors. The 4-channel ASIC manufactured in 65 nm CMOS by TSMC has been optimized for 50 um thick AC-LGAD. The evaluation of the analog front end with \b{eta}-particles impinging on 3x3 AC-LGAD arrays (500 um pitch, 200x200 um2 metal) confirms a fast output rise time of 600 ps and good timing performance with a jitter of 45 ps. Further calibration experiments and TCT laser studies indicate some gain limitations that are being investigated and are driving the design of the second-generation pre-amplification stages to reach a jitter of 15 ps.
△ Less
Submitted 10 December, 2022; v1 submitted 17 October, 2022;
originally announced October 2022.
-
Front-end electronic readout system for the Belle II imaging Time-Of-Propagation detector
Authors:
Dmitri Kotchetkov,
Oskar Hartbrich,
Matthew Andrew,
Matthew Barrett,
Martin Bessner,
Vishal Bhardwaj,
Thomas Browder,
Julien Cercillieux,
Ryan Conrad,
Istvan Danko,
Shawn Dubey,
James Fast,
Bryan Fulsom,
Christopher Ketter,
Brian Kirby,
Alyssa Loos,
Luca Macchiarulo,
Bostjan Macek,
Kurtis Nishimura,
Milind Purohit,
Carl Rosenfeld,
Ziru Sang,
Vladimir Savinov,
Gary Varner,
Gerard Visser
, et al. (2 additional authors not shown)
Abstract:
The Time-Of-Propagation detector is a Cherenkov particle identification detector based on quartz radiator bars for the Belle II experiment at the SuperKEKB electron-positron collider. The purpose of the detector is to identify the type of charged hadrons produced in electron-positron collisions, and requires a single photon timing resolution below 100 picoseconds. A novel front-end electronic syst…
▽ More
The Time-Of-Propagation detector is a Cherenkov particle identification detector based on quartz radiator bars for the Belle II experiment at the SuperKEKB electron-positron collider. The purpose of the detector is to identify the type of charged hadrons produced in electron-positron collisions, and requires a single photon timing resolution below 100 picoseconds. A novel front-end electronic system was designed, built, and integrated to acquire data from the 8192 microchannel plate photomultiplier tube channels in the detector. Waveform sampling of these analog signals is done by switched-capacitor array application-specific integrated circuits. The processes of triggering, digitization of windows of interest, readout, and data transfer to the Belle II data acquisition system are managed by Xilinx Zynq-7000 programmable system on a chip devices.
△ Less
Submitted 12 July, 2019; v1 submitted 28 April, 2018;
originally announced April 2018.
-
Invited Article: miniTimeCube
Authors:
V. A. Li,
R. Dorrill,
M. J. Duvall,
J. Koblanski,
S. Negrashov,
M. Sakai,
S. A. Wipperfurth,
K. Engel,
G. R. Jocher,
J. G. Learned,
L. Macchiarulo,
S. Matsuno,
W. F. McDonough,
H. P. Mumm,
J. Murillo,
K. Nishimura,
M. Rosen,
S. M. Usman,
G. S. Varner
Abstract:
We present the development of the miniTimeCube (mTC), a novel compact neutrino detector. The mTC is a multipurpose detector, aiming to detect not only neutrinos but also fast/thermal neutrons. Potential applications include the counterproliferation of nuclear materials and the investigation of antineutrino short-baseline effects. The mTC is a plastic 0.2% $^{10}$B - doped scintillator (13 cm)$^3$…
▽ More
We present the development of the miniTimeCube (mTC), a novel compact neutrino detector. The mTC is a multipurpose detector, aiming to detect not only neutrinos but also fast/thermal neutrons. Potential applications include the counterproliferation of nuclear materials and the investigation of antineutrino short-baseline effects. The mTC is a plastic 0.2% $^{10}$B - doped scintillator (13 cm)$^3$ cube surrounded by 24 Micro-Channel Plate (MCP) photon detectors, each with an $8\times8$ anode totaling 1536 individual channels/pixels viewing the scintillator. It uses custom-made electronics modules which mount on top of the MCPs, making our detector compact and able to both distinguish different types of events and reject noise in real time. The detector is currently deployed and being tested at the National Institute of Standards and Technology (NIST) Center for Neutron Research (NCNR) nuclear reactor (20 MW$_\mathrm{th}$) in Gaithersburg, MD. A shield for further tests is being constructed, and calibration and upgrades are ongoing. The mTC's improved spatiotemporal resolution will allow for determination of incident particle directions beyond previous capabilities.
△ Less
Submitted 3 February, 2016;
originally announced February 2016.
-
A low-resolution, GSa/s streaming digitizer for a correlation-based trigger system
Authors:
Kurtis Nishimura,
Matthew Andrew,
Zhe Cao,
Michael Cooney,
Peter Gorham,
Luca Macchiarulo,
Lisa Ritter,
Andres Romero-Wolf,
Gary Varner
Abstract:
Searches for radio signatures of ultra-high energy neutrinos and cosmic rays could benefit from improved efficiency by using real-time beamforming or correlation triggering. For missions with power limitations, such as the ANITA-3 Antarctic balloon experiment, full speed high resolution digitization of incoming signals is not practical. To this end, the University of Hawaii has developed the Realt…
▽ More
Searches for radio signatures of ultra-high energy neutrinos and cosmic rays could benefit from improved efficiency by using real-time beamforming or correlation triggering. For missions with power limitations, such as the ANITA-3 Antarctic balloon experiment, full speed high resolution digitization of incoming signals is not practical. To this end, the University of Hawaii has developed the Realtime Independent Three-bit Converter (RITC), a 3-channel, 3-bit, streaming analog-to-digital converter implemented in the IBM-8RF 0.13 um process. RITC is primarily designed to digitize broadband radio signals produced by the Askaryan effect, and thus targets an analog bandwidth of >1 GHz, with a sample-and-hold architecture capable of storing up to 2.6 gigasamples-per-second. An array of flash analog-to-digital converters perform 3-bit conversion of sets of stored samples while acquisition continues elsewhere in the sampling array. A serial interface is provided to access an array of on chip digital-to-analog converters that control the digitization thresholds for each channel as well as the overall sampling rate. Demultiplexed conversion outputs are read out simultaneously for each channel via a set of 36 LVDS links, each running at 650 Mb/s. We briefly describe the design architecture of RITC. Evaluation of the RITC is currently under way, and we will report testing updates as they become available, including prospects for the use of this architecture as the analog half of a novel triggering system for the ANITA-3 ultra-high energy neutrino experiment.
△ Less
Submitted 19 March, 2012;
originally announced March 2012.
