Showing 1–50 of 98 results for author: Qin, Z

Hybrid roles of adaptation and optimization in formation of vascular network

Authors: Yawei Wang, Zilu Qin, Yubo Fan

Abstract: It was hypothesized that the structures of biological transport networks are the result of either energy consumption or adaptation dynamics. Although approaches based on these hypotheses can produce optimal network and form loop structures, we found that neither possesses complete ability to generate complex networks that resemble vascular network in living organisms, which motivated us to propose… ▽ More It was hypothesized that the structures of biological transport networks are the result of either energy consumption or adaptation dynamics. Although approaches based on these hypotheses can produce optimal network and form loop structures, we found that neither possesses complete ability to generate complex networks that resemble vascular network in living organisms, which motivated us to propose a hybrid approach. This approach can replicate the path dependency phenomenon of main branches and produce an optimal network that resembles the real vascular network. We further show that there is a clear transition in the structural pattern of the vascular network, shifting from `chive-like' to dendritic configuration after a period of sequenced adaptation and optimization. △ Less

Submitted 12 September, 2024; originally announced September 2024.

K-band LiNbO3 A3 Lamb-wave Resonators with Sub-wavelength Through-holes

Authors: Shu-Mao Wu, Hao Yan, Chen-Bei Hao, Zhen-Hui Qin, Si-Yuan Yu, Yan-Feng Chen

Abstract: Addressing critical challenges in Lamb wave resonators, this paper presents the first validation of resonators incorporating sub-wavelength through-holes. Using the A3 mode resonator based on a LiNbO3 single-crystal thin film and operating in the K band as a prominent example, we demonstrate the advantages of the through-hole design. In the absence of additional processing steps, and while maintai… ▽ More Addressing critical challenges in Lamb wave resonators, this paper presents the first validation of resonators incorporating sub-wavelength through-holes. Using the A3 mode resonator based on a LiNbO3 single-crystal thin film and operating in the K band as a prominent example, we demonstrate the advantages of the through-hole design. In the absence of additional processing steps, and while maintaining device performance--including operating frequency, electromechanical coupling coefficient, and quality factor--without introducing extra spurious modes, this approach effectively reduces the ineffective suspension area of the piezoelectric LN film, potentially enhancing mechanical and thermal stability. It also standardizes etching distances (and times) across various Lamb wave resonators on a single wafer, facilitating the development of Lamb wave filters. The versatility of the through-hole technique, with relaxed constraints on hole geometry and arrangement, further highlights its significance. Together with the other advantages, these features underscore the transformative potential of through-holes in advancing the practical implementation of Lamb wave resonators and filters. △ Less

Submitted 1 September, 2024; originally announced September 2024.

Comments: 9 pages, 10 figures

Study of the decay and production properties of $D_{s1}(2536)$ and $D_{s2}^*(2573)$

Authors: M. Ablikim, M. N. Achasov, P. Adlarson, O. Afedulidis, X. C. Ai, R. Aliberti, A. Amoroso, Q. An, Y. Bai, O. Bakina, I. Balossino, Y. Ban, H. -R. Bao, V. Batozskaya, K. Begzsuren, N. Berger, M. Berlowski, M. Bertani, D. Bettoni, F. Bianchi, E. Bianco, A. Bortone, I. Boyko, R. A. Briere, A. Brueggemann , et al. (645 additional authors not shown)

Abstract: The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be… ▽ More The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be $(35.9\pm 4.8\pm 3.5)\%$ and $(37.4\pm 3.1\pm 4.6)\%$, respectively. The measurements are in tension with predictions based on the assumption that the $D_{s1}(2536)$ and $D_{s2}^*(2573)$ are dominated by a bare $c\bar{s}$ component. The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ cross sections are measured, and a resonant structure at around 4.6~GeV with a width of 50~MeV is observed for the first time with a statistical significance of $15σ$ in the $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ process. It could be the $Y(4626)$ found by the Belle collaboration in the $D_s^+D_{s1}(2536)^{-}$ final state, since they have similar masses and widths. There is also evidence for a structure at around 4.75~GeV in both processes. △ Less

Submitted 10 July, 2024; originally announced July 2024.

Parallel fast random bit generation based on spectrotemporally uncorrelated Brillouin random fiber lasing oscillation

Authors: Yuxi Pang, Shaonian Ma, Qiang Ji, Xian Zhao, Zengguang Qin, Zhaojun Liu, Ping Lu, Xiaoyi Bao, Yanping Xu

Abstract: Correlations existing between spectral components in multi-wavelength lasers have been the key challenge that hinders these laser sources from being developed to chaotic comb entropy sources for parallel random bit generation. Herein, spectrotemporally uncorrelated multi-order Stokes/anti-Stokes emissions are achieved by cooperatively exploiting nonlinear optical processes including cascaded stimu… ▽ More Correlations existing between spectral components in multi-wavelength lasers have been the key challenge that hinders these laser sources from being developed to chaotic comb entropy sources for parallel random bit generation. Herein, spectrotemporally uncorrelated multi-order Stokes/anti-Stokes emissions are achieved by cooperatively exploiting nonlinear optical processes including cascaded stimulated Brillouin scattering and quasi-phase-matched four-wave mixing in a Brillouin random fiber laser. Chaotic instabilities induced by random mode resonance are enhanced and disorderly redistributed among different lasing lines through complex nonlinear optical interactions, which comprehensively releases the inherent correlation among multiple Stokes/anti-Stokes emission lines, realizing a chaotic frequency comb with multiple spectrotemporally uncorrelated channels. Parallel fast random bit generation is fulfilled with 31 channels, single-channel bit rate of 35-Gbps and total bit rate of 1.085-Tbps. National Institute of Standards and Technology statistic tests verify the randomness of generated bit streams. This work, in a simple and efficient way, breaks the correlation barrier for utilizing multi-wavelength laser to achieve high-quality spectrotemporally uncorrelated chaotic laser source, opening new avenues for achieving greatly accelerated random bit generation through parallelization and potentially revolutionizing the current architecture of secure communication and high-performance computation. △ Less

Submitted 3 July, 2024; originally announced July 2024.

Beam test results of the prototype of the multi wire drift chamber for the CSR external-target experiment

Authors: Zhi Qin, Zhoubo He, Zhe Cao, Tao Chen, Zhi Deng, Limin Duan, Dong Guo, Rongjiang Hu, Jie Kong, Canwen Liu, Peng Ma, Xianglun Wei, Shihai Wen, Xiangjie Wen, Junwei Yan, Herun Yang, Zuoqiao Yang, Yuhong Yu, Zhigang Xiao

Abstract: The half-size prototype of the multi wire drift chamber (MWDC) for the cooling storage ring (CSR) external-target experiment (CEE) was assembled and tested in 350 MeV/u Kr+Fe reactions on the heavy ion research facility in Lanzhou (HIRFL). The prototype consists of 6 sense layers, where the sense wires are stretched in three directions X, U and V, meeting $0^\circ$, $30^\circ$ and $-30^\circ$ with… ▽ More The half-size prototype of the multi wire drift chamber (MWDC) for the cooling storage ring (CSR) external-target experiment (CEE) was assembled and tested in 350 MeV/u Kr+Fe reactions on the heavy ion research facility in Lanzhou (HIRFL). The prototype consists of 6 sense layers, where the sense wires are stretched in three directions X, U and V, meeting $0^\circ$, $30^\circ$ and $-30^\circ$ with respect to the vertical axis, respectively. The sensitive area of the prototype is $76 {\rm cm} \times 76 {\rm cm}$. The amplified and shaped signals from the anode wires are digitized in a serial capacity array. Being operated with 1500 V high voltage on the anode wires, the efficiency for each layer is beyond 95\%. The tracking residual is about $301 \pm 2 \rm μm$. The performance meets the requirements of CEE. △ Less

Submitted 15 May, 2024; originally announced June 2024.

Assessment of scattered and leakage radiation from ultra-portable digital chest X-ray systems: An independent study

Authors: Leonie E Paulis, Roald S Schnerr, Jarred Halton, Zhi Zhen Qin, Arlene Chua

Abstract: Ultraportable X-ray devices are ideal for TB screening in resource-limited settings. Unfortunately, guidelines on the radiation safety of these devices are lacking. The aim of the study was to determine the radiation dose by scattered and leakage radiation of ultraportable X-ray devices to provide a basis for these guidelines. Radiation dose measurements were performed with four ultraportable X-ra… ▽ More Ultraportable X-ray devices are ideal for TB screening in resource-limited settings. Unfortunately, guidelines on the radiation safety of these devices are lacking. The aim of the study was to determine the radiation dose by scattered and leakage radiation of ultraportable X-ray devices to provide a basis for these guidelines. Radiation dose measurements were performed with four ultraportable X-ray devices that meet the WHO-IAEA criteria. An anthropomorphic thorax phantom was positioned in posterior-anterior orientation in a clinically representative X-ray setup. X-ray exams were acquired with the following scan parameters: 90kV, 2.5mAs and maximum mAs, 1m and 1.8m source-to-skin distance. The entrance skin dose was measured at the center of the phantom. The scattered radiation dose was measured at 1m from the phantom as a function of scatter angle. Leakage radiation was measured at 0.5m from the X-ray tube with collimators closed and covered with additional lead. From the scatter measurements, the 'safe distance bunny' was determined, which was the minimum distance to the phantom to stay below the international dose limit to the public (1mSv per year) at a given workload. The longest distance (related to highest scatter dose) was observed behind the edges of the detector and back towards the X-ray tube, whereas the shortest distance (related to lowest scatter dose) was observed to the sides of the phantom. For the radiographer position, the total radiation dose by scattered and leakage radiation was determined in various scenarios. In most cases, the total radiation dose of ultraportable X-ray devices can be kept below 1mSv per year by employing basic radiation safety rules:1. Reduce time in the field, 2. Increase distance to the X-ray source, and 3. Use shielding measures (lead apron). Ultraportable X-ray devices can be safely used for TB screening when using adequate precautions. △ Less

Submitted 14 June, 2024; originally announced June 2024.

Double-layer Thin-film LiNbO3 Longitudinally Excited Shear Wave Resonators with Ultra-large Electromechanical Coupling Coefficient and Spurious-Free Performance

Authors: Zhen-Hui Qin, Shu-Mao Wu, Chen-Bei Hao, Hua-Yang Chen, Sheng-Nan Liang, Si-Yuan Yu, Yan-Feng Chen

Abstract: This work proposes a double-layer thin-film lithium niobate (LiNbO3) longitudinally excited shear wave resonator with a theoretical electromechanical coupling coefficient exceeding 60%, RaR close to 28%, and no spurious modes. This ultra-large electromechanical coupling coefficient, which is close to the upper limit of LiNbO3, is much larger than all microwave acoustic resonators reported so far.… ▽ More This work proposes a double-layer thin-film lithium niobate (LiNbO3) longitudinally excited shear wave resonator with a theoretical electromechanical coupling coefficient exceeding 60%, RaR close to 28%, and no spurious modes. This ultra-large electromechanical coupling coefficient, which is close to the upper limit of LiNbO3, is much larger than all microwave acoustic resonators reported so far. Based on X-cut thin-film LiNbO3, when the film thickness is in the order of hundreds of nanometers, the frequency of the fundamental mode of the resonator can cover 1GHz to10GHz. The resonator design is convenient and flexible. The resonant frequency can be modulated monotonically by changing either the electrode or the thickness of the thin-film LiNbO3 without introducing additional spurious modes. This ideal resonator architecture is also applicable to LiTaO3. With the development of the new generation of mobile communications, this resonator is expected to become a key solution for future high-performance, ultra-wide-bandwidth acoustic filters. △ Less

Submitted 27 May, 2024; originally announced May 2024.

Comments: 15 pages,9 figures

Mass production and performance study on the 20-inch PMT acrylic protection covers in JUNO

Authors: Miao He, Zhonghua Qin, Diru Wu, Meihang Xu, Wan Xie, Fang Chen, Xiaoping Jing, Genhua Yin, Shengjiong Yin, Linhua Gu, Xiaofeng Xia, Qinchang Wang

Abstract: The Jiangmen Underground Neutrino Observatory is a neutrino experiment that incorporates 20,012 20-inch photomultiplier tubes (PMTs) and 25,600 3-inch PMTs. A dedicated system was designed to protect the PMTs from an implosion chain reaction underwater. As a crucial element of the protection system, over 20,000 acrylic covers were manufactured through injection molding, ensuring high dimensional p… ▽ More The Jiangmen Underground Neutrino Observatory is a neutrino experiment that incorporates 20,012 20-inch photomultiplier tubes (PMTs) and 25,600 3-inch PMTs. A dedicated system was designed to protect the PMTs from an implosion chain reaction underwater. As a crucial element of the protection system, over 20,000 acrylic covers were manufactured through injection molding, ensuring high dimensional precision, mechanical strength, and transparency. This paper presents the manufacturing technology, mass production process, and performance characteristics of the acrylic covers. △ Less

Submitted 25 February, 2024; originally announced February 2024.

Comments: 12 pages, 10 figures

Wave-graphene: a full-auxetic carbon semiconductor with high flexibility and optical UV absorption

Authors: Linfeng Yu, Yi Zhang, Jianzhou Lin, Kexin Dong, Xiong Zheng, Zhenzhen Qin, Guangzhao Qin

Abstract: The abundant bonding possibilities of Carbon stimulate the design of numerous carbon allotropes, promising the foundation for exploring structure-functionality relationships. Herein, utilizing the space bending strategy, we successfully engineered a two-dimensional carbon allotrope with pure sp2 hybridization, named "Wave-graphene" from the unique wave-like ripple structure. The novel Wave-graphen… ▽ More The abundant bonding possibilities of Carbon stimulate the design of numerous carbon allotropes, promising the foundation for exploring structure-functionality relationships. Herein, utilizing the space bending strategy, we successfully engineered a two-dimensional carbon allotrope with pure sp2 hybridization, named "Wave-graphene" from the unique wave-like ripple structure. The novel Wave-graphene exhibits full-auxetic behavior due to anisotropic mechanical response, possessing both negative and zero Poisson's ratios. The fundamental mechanism can be attributed to the fact that highly buckled out-of-plane structures lead to anisotropic responses of in-plane nonlinear interactions, which further lead to anisotropy of lattice vibrations. In addition, Wave-graphene is found having quasi-direct wide bandgap of 2.01 eV, the excellent optical transparency and the high flexibility. The successful design of Wave-graphene with excellent outstanding multifunctional properties shows that the utilization of space bending strategies can provide more degrees of freedom for designing novel materials, further enriching the carbon material family and supplementing its versatility. △ Less

Submitted 24 January, 2024; originally announced January 2024.

Two-relaxation-time regularized lattice Boltzmann model for Navier-Stokes equations

Authors: Yuan Yu, Zuojian Qin, Siwei Chen, Shi Shu, Hai-Zhuan Yuan

Abstract: In this paper, we propose a novel two-relaxation-time regularized lattice Boltzmann (TRT-RLB) model for simulating weakly compressible isothermal flows. A free relaxation parameter, $τ_{s,2}$, is employed to relax the regularized non-equilibrium third-order terms. Chapman-Enskog analysis reveals that our model can accurately recover the Navier-Stokes equations (NSEs). Theoretical analysis of the P… ▽ More In this paper, we propose a novel two-relaxation-time regularized lattice Boltzmann (TRT-RLB) model for simulating weakly compressible isothermal flows. A free relaxation parameter, $τ_{s,2}$, is employed to relax the regularized non-equilibrium third-order terms. Chapman-Enskog analysis reveals that our model can accurately recover the Navier-Stokes equations (NSEs). Theoretical analysis of the Poiseuille flow problem demonstrates that the slip velocity magnitude in the proposed model is controlled by a magic parameter, which can be entirely eliminated under specific values, consistent with the classical TRT model. Our simulations of the double shear layer problem, Taylor-Green vortex flow, and force-driven Poiseuille flow confirm that the stability and accuracy of our model significantly surpass those of both the regularized lattice Boltzmann (RLB) and two-relaxation-time (TRT) models, even under super-high Reynolds numbers as $Re=10^7$. Concurrently, the TRT-RLB model exhibits superior performance in very high viscosity scenarios. The simulations of creeping flow around a square cylinder demonstrates the model's capability to accurately compute ultra-low Reynolds numbers as $Re=10^{-7}$. This study establishes the TRT-RLB model as a flexible and robust tool in computational fluid dynamics. △ Less

Submitted 27 March, 2024; v1 submitted 15 December, 2023; originally announced December 2023.

The trigger system for the CSR external-target experiment

Authors: Dong Guo, Haoqian Xyu, DongDong Qi, HeXiang Wang, Lei Zhang, Zhengyang Sun, Zhi Qin, Botan Wang, Yingjie Zhou, Zekun Wang, Yuansheng Yang, Yuhao Qin, Xianglun Wei, Herun Yang, Yuhong Yu, Lei Zhao, Zhigang Xiao

Abstract: A trigger system has been designed and implemented for the HIRFL-CSR external target experiment (CEE), the spectrometer for studying nuclear matter properties with heavy ion collisions in the GeV energy region. The system adopts master-slave structure and serial data transmission mode using optical fiber to deal with different types of detectors and long-distance signal transmission. The trigger l… ▽ More A trigger system has been designed and implemented for the HIRFL-CSR external target experiment (CEE), the spectrometer for studying nuclear matter properties with heavy ion collisions in the GeV energy region. The system adopts master-slave structure and serial data transmission mode using optical fiber to deal with different types of detectors and long-distance signal transmission. The trigger logic can be accessed based on command register and controlled by a remote computer. The overall field programmable gate array (FPGA) logic can be flexibly reconfigured online to match the physical requirements of the experiment. The trigger system has been tested in beam experiment. It is demonstrated that the trigger system functions correctly and meets the physical requirements of CEE. △ Less

Submitted 12 September, 2023; originally announced September 2023.

Development of a SciFi-based beam monitor for COMET

Authors: Yu Xu, Yunsong Ning, Zhizhen Qin, Yao Teng, Changqing Feng, Jian Tang, Yu Chen, Yoshinori Fukao, Satoshi Mihara, Kou Oishi

Abstract: COMET is a leading experiment to search for coherent conversion of $μ^- \mathrm{N}\to e^- \mathrm{N}$ with a high-intensity pulsed muon beamline, produced by the innovative slow extraction techniques. Therefore, it is critical to measure the characteristics of the muon beam. We set up a Muon Beam Monitor (MBM), where scintillation fibers (SciFi) weaved in the cross shape are coupled to silicon pho… ▽ More COMET is a leading experiment to search for coherent conversion of $μ^- \mathrm{N}\to e^- \mathrm{N}$ with a high-intensity pulsed muon beamline, produced by the innovative slow extraction techniques. Therefore, it is critical to measure the characteristics of the muon beam. We set up a Muon Beam Monitor (MBM), where scintillation fibers (SciFi) weaved in the cross shape are coupled to silicon photomultipliers (SiPM), to measure the spatial profile and timing structure of the extracted muon beam for COMET. The MBM detector has been tested successfully with a proton beamline in China Spallation Neutron Source (CSNS) and taken data with good performance in the commissioning run called COMET Phase-$α$. Experience of the MBM development, such as the mechanical structure and electronics readout, and its beam measurement results will be shared. △ Less

Submitted 15 September, 2023; v1 submitted 29 August, 2023; originally announced August 2023.

Biaxial strain modulated electronic structures of layered two-dimensional MoSiGeN4 Rashba systems

Authors: Puxuan Li, Xuan Wang, Haoyu Wang, Qikun Tian, Jinyuan Xu, Linfeng Yu, Guangzhao Qin, Zhenzhen Qin

Abstract: The two-dimensional (2D) MA2Z4 family has received extensive attention in manipulating its electronic structure and achieving intriguing physical properties. However, engineering the electronic properties remains a challenge. Herein, based on first-principles calculations, we systematically investigate the effect of biaxial strains on the electronic structures of 2D Rashba MoSiGeN4 (MSGN), and fur… ▽ More The two-dimensional (2D) MA2Z4 family has received extensive attention in manipulating its electronic structure and achieving intriguing physical properties. However, engineering the electronic properties remains a challenge. Herein, based on first-principles calculations, we systematically investigate the effect of biaxial strains on the electronic structures of 2D Rashba MoSiGeN4 (MSGN), and further explore how the interlayer interactions affect the Rashba spin splitting in such strained layered MSGNs. After applying biaxial strains, the band gap decreases monotonically with increasing tensile strains but increases when the compressive strains are applied. An indirect-direct-indirect band gap transition is induced by applying a moderate compressive strain (< 5%) in the MSGNs. Due to the symmetry breaking and moderate spin-orbit coupling (SOC), the monolayer MSGN possess an isolated Rashba spin splitting (R) near the Fermi level, which could be effectively regulated to the Lifshitz transition (L) by biaxial strain. For instance, a L-R-L transformation of Fermi surface is presented in monolayer and a more complex and changeable L-R-L-R evolution is observed in bilayer and trilayer MSGNs as the biaxial strain vary from -8% to 12%, which actually depend on the appearance, variation, and vanish of the Mexican hat band in the absence of SOC under different strains. The contribution of Mo-dz2 orbital hybridized with N-pz orbital in the highest valence band plays a dominant role on the band evolution under biaxial strains, where the R-L evolution corresponds to the decreased Mo-dz2 orbital contribution. Our study highlights the biaxial strain controllable Rashba spin splitting, in particular the introduction and even the evolution of Lifshitz transition near Fermi surface, which makes the strained MSGNs as promising candidates for future applications in spintronic devices. △ Less

Submitted 16 August, 2023; originally announced August 2023.

Comments: 21 pages, 7 figures, supplementary information

Design & Optimization of the HV divider for JUNO 20-inch PMT

Authors: Feng-Jiao Luo, Zhi-Min Wang, An-Bo Yang, Yue-Kun Heng, Zhong-Hua Qin, Mei-Hang Xu, Sen Qian, Shu-Lin Liu, Yi-Fang Wang, Wei Wang, Alexander Olshevskiy, Guo-Rui Huang, Zhen Jin, Ling Ren, Xing-Chao Wang, Shu-Guang Si, Jian-Ning Sun

Abstract: The Jiangmen Underground Observatory (JUNO) is a 20-kton liquid scintillator detector that employs 20,000 20-inch photomultiplier tubes (PMTs) as photon sensors, with 5,000 dynode-PMTs from HAMAMATSU Photonics K.K. (HPK), and 15,000 MCP-PMTs from North Night Vision Technology (NNVT) installed in pure water. JUNO aims to provide long-lasting and the best performance operation by utilizing a high-tr… ▽ More The Jiangmen Underground Observatory (JUNO) is a 20-kton liquid scintillator detector that employs 20,000 20-inch photomultiplier tubes (PMTs) as photon sensors, with 5,000 dynode-PMTs from HAMAMATSU Photonics K.K. (HPK), and 15,000 MCP-PMTs from North Night Vision Technology (NNVT) installed in pure water. JUNO aims to provide long-lasting and the best performance operation by utilizing a high-transparency liquid scintillator, high detection efficiency PMTs, and specially designed electronics including water-proof potting for the high voltage (HV) dividers of PMTs. In this paper, we present a summary of the design and optimization of HV dividers for both types of 20-inch PMTs, which includes collection efficiency, charge resolution, HV divider current, pulse shape, and maximum amplitude restriction. We have developed and finalized four schemes of the HV divider for different scenarios, including the final version selected by JUNO. All 20,000 20-inch PMTs have successfully undergone production and burning tests. △ Less

Submitted 19 July, 2023; originally announced July 2023.

Comments: 14pages,28figures

Regulating nanoscale heat transfer with Janus nanoparticles

Authors: Chen Xie, Blake Wilson, Zhenpeng Qin

Abstract: Janus nanoparticles (JNPs) with heterogeneous compositions or interfacial properties can exhibit directional heating upon external excitation, such as laser radiation and magnetic field. This directional heating may be harnessed for new nanotechnology and biomedical applications. Understanding thermal transport and temperature control with JNP heating is critical for these advances. Here, we devel… ▽ More Janus nanoparticles (JNPs) with heterogeneous compositions or interfacial properties can exhibit directional heating upon external excitation, such as laser radiation and magnetic field. This directional heating may be harnessed for new nanotechnology and biomedical applications. Understanding thermal transport and temperature control with JNP heating is critical for these advances. Here, we developed a numerical framework to analyze the asymmetric thermal transport in JNP heating under photothermal stimulation. We found that JNP-induced temperature contrast, defined as the ratio of temperature increase in the surrounding water, shows a substantial size and polar angle dependence. Notably, we discovered a significant enhancement of the temperature contrast under pulsed heating due to thermal confinement, compared with the continuous heating. This work brings new insights into the thermal responses of JNP heating and advances the field. △ Less

Submitted 26 May, 2023; originally announced May 2023.

Comments: 5 figures in the main text, and 9 figures in the supporting information

A Complex-boundary Treatment Method for Finite Volume Schemes with Cut-Cartesian Cell Mesh

Authors: Zhaohui Qin

Abstract: In this paper, a second-order accurate method was developed for calculating fluid flows in complex geometries. This method uses cut-Cartesian cell mesh in finite volume framework. Calculus is employed to relate fluxes and gradients along curved surfaces to cell-averaged values. The resultant finite difference equations are sparse diagonal systems of equations. This method does not need repeated po… ▽ More In this paper, a second-order accurate method was developed for calculating fluid flows in complex geometries. This method uses cut-Cartesian cell mesh in finite volume framework. Calculus is employed to relate fluxes and gradients along curved surfaces to cell-averaged values. The resultant finite difference equations are sparse diagonal systems of equations. This method does not need repeated polynomial interpolation or reconstruction. Two-dimensional incompressible lid-driven semi-circular cavity flow at two Reynolds numbers was simulated with the current method and second-order accuracy was reached. The current method might be extended to third-order accuracy. △ Less

Submitted 9 April, 2023; originally announced April 2023.

The JUNO experiment Top Tracker

Authors: JUNO Collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Abid Aleem, Tsagkarakis Alexandros, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Weidong Bai, Nikita Balashov, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato , et al. (592 additional authors not shown)

Abstract: The main task of the Top Tracker detector of the neutrino reactor experiment Jiangmen Underground Neutrino Observatory (JUNO) is to reconstruct and extrapolate atmospheric muon tracks down to the central detector. This muon tracker will help to evaluate the contribution of the cosmogenic background to the signal. The Top Tracker is located above JUNO's water Cherenkov Detector and Central Detector… ▽ More The main task of the Top Tracker detector of the neutrino reactor experiment Jiangmen Underground Neutrino Observatory (JUNO) is to reconstruct and extrapolate atmospheric muon tracks down to the central detector. This muon tracker will help to evaluate the contribution of the cosmogenic background to the signal. The Top Tracker is located above JUNO's water Cherenkov Detector and Central Detector, covering about 60% of the surface above them. The JUNO Top Tracker is constituted by the decommissioned OPERA experiment Target Tracker modules. The technology used consists in walls of two planes of plastic scintillator strips, one per transverse direction. Wavelength shifting fibres collect the light signal emitted by the scintillator strips and guide it to both ends where it is read by multianode photomultiplier tubes. Compared to the OPERA Target Tracker, the JUNO Top Tracker uses new electronics able to cope with the high rate produced by the high rock radioactivity compared to the one in Gran Sasso underground laboratory. This paper will present the new electronics and mechanical structure developed for the Top Tracker of JUNO along with its expected performance based on the current detector simulation. △ Less

Submitted 9 March, 2023; originally announced March 2023.

Comments: 20 pages

Journal ref: Nucl.Instrum.Meth.A 1057 (2023) 168680

JUNO sensitivity to $^7$Be, $pep$, and CNO solar neutrinos

Authors: Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Abid Aleem, Tsagkarakis Alexandros, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Weidong Bai, Nikita Balashov, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Marco Beretta , et al. (592 additional authors not shown)

Abstract: The Jiangmen Underground Neutrino Observatory (JUNO), the first multi-kton liquid scintillator detector, which is under construction in China, will have a unique potential to perform a real-time measurement of solar neutrinos well below the few MeV threshold typical for Water Cherenkov detectors. JUNO's large target mass and excellent energy resolution are prerequisites for reaching unprecedented… ▽ More The Jiangmen Underground Neutrino Observatory (JUNO), the first multi-kton liquid scintillator detector, which is under construction in China, will have a unique potential to perform a real-time measurement of solar neutrinos well below the few MeV threshold typical for Water Cherenkov detectors. JUNO's large target mass and excellent energy resolution are prerequisites for reaching unprecedented levels of precision. In this paper, we provide estimation of the JUNO sensitivity to 7Be, pep, and CNO solar neutrinos that can be obtained via a spectral analysis above the 0.45 MeV threshold. This study is performed assuming different scenarios of the liquid scintillator radiopurity, ranging from the most opti mistic one corresponding to the radiopurity levels obtained by the Borexino experiment, up to the minimum requirements needed to perform the neutrino mass ordering determination with reactor antineutrinos - the main goal of JUNO. Our study shows that in most scenarios, JUNO will be able to improve the current best measurements on 7Be, pep, and CNO solar neutrino fluxes. We also perform a study on the JUNO capability to detect periodical time variations in the solar neutrino flux, such as the day-night modulation induced by neutrino flavor regeneration in Earth, and the modulations induced by temperature changes driven by helioseismic waves. △ Less

Submitted 7 March, 2023; originally announced March 2023.

Effects of orientational and positional randomness of particles on photonic band gap

Authors: Zichen Qin, Tao Liu, Duanduan Wan

Abstract: A recent work [PRL, 126, 208002 (2021)] has explored how thermal noise-induced randomness in a self-assembled photonic crystal affects photonic band gaps (PBGs). For the system of a two-dimensional photonic crystal composed of a self-assembled array of rods with square cross sections, it was found that its PBGs can exist over an extensive range of packing densities. Counterintuitively, at intermed… ▽ More A recent work [PRL, 126, 208002 (2021)] has explored how thermal noise-induced randomness in a self-assembled photonic crystal affects photonic band gaps (PBGs). For the system of a two-dimensional photonic crystal composed of a self-assembled array of rods with square cross sections, it was found that its PBGs can exist over an extensive range of packing densities. Counterintuitively, at intermediate packing densities, the transverse magnetic (TM) band gap of the self-assembled system can be larger than that of its corresponding perfect system (rods arranged in a perfect square lattice and having identical orientations). Due to shape anisotropicity, the randomness in the self-assembled system contains two kinds of randomness, i.e., positional and orientational randomness of the particles. In this work, we further investigate how PBGs are influenced solely by positional or orientational randomness. We find that compared to the perfect situation, the introduction of only orientational randomness decreases the transverse electric (TE) band gap while having no obvious effects on the transverse magnetic (TM) band gap. In contrast, the introduction of only positional randomness decreases the TE band gap significantly, while it can widen or narrow the TM band gap, depending on the parameter range. We also discuss the thermal (i.e., self-assembled) system where two kinds of randomness are present. Our study contributes to a better understanding of the role orientational randomness and positional randomness play on PBGs, and may benefit the PBG engineering of photonic crystals through self-assembly approaches. △ Less

Submitted 3 February, 2023; originally announced February 2023.

A CsI hodoscope on CSHINE for Bremsstrahlung γ-rays in Heavy Ion Reactions

Authors: Yuhao Qin, Dong Guo, Sheng Xiao, Yijie Wang, Fenhai Guan, Xinyue Diao, Zhi Qin, Dawei Si, Boyuan Zhang, Yaopeng Zhang, Xianglun Wei, Herun Yang, Peng Ma, Haichuan Zou, Tianli Qiu, Xinjie Huang, Rongjiang Hu, Limin Duan, Fangfang Duan, Qiang Hu, Junbing Ma, Shiwei Xu, Zhen Bai, Yanyun Yang, Zhigang Xiao

Abstract: Bremsstrahlung $γ$ production in heavy ion reactions at Fermi energies carries important physical information including the nuclear symmetry energy at supra-saturation densities. In order to detect the high energy Bremsstrahlung $γ$ rays, a hodoscope consisting of 15 CsI(Tl) crystal read out by photo multiplier tubes has been built, tested and operated in experiment. The resolution, efficiency and… ▽ More Bremsstrahlung $γ$ production in heavy ion reactions at Fermi energies carries important physical information including the nuclear symmetry energy at supra-saturation densities. In order to detect the high energy Bremsstrahlung $γ$ rays, a hodoscope consisting of 15 CsI(Tl) crystal read out by photo multiplier tubes has been built, tested and operated in experiment. The resolution, efficiency and linear response of the units to $γ$ rays have been studied using radioactive source and $({\rm p},γ)$ reactions. The inherent energy resolution of $1.6\%+2\%/E_γ^{1/2}$ is obtained. Reconstruction method has been established through Geant 4 simulations, reproducing the experimental results where comparison can be made. Using the reconstruction method developed, the whole efficiency of the hodoscope is about $2.6\times 10^{-4}$ against the $4π$ emissions at the target position, exhibiting insignificant dependence on the energy of incident $γ$ rays above 20 MeV. The hodoscope is operated in the experiment of $^{86}$Kr + $^{124}$Sn at 25 MeV/u, and a full $γ$ energy spectrum up to 80 MeV has been obtained. △ Less

Submitted 27 December, 2022; originally announced December 2022.

Comments: 9 pages, 19 figures

Transient chirp reconstruction of electron beam via tightly focused chirped laser pulse

Authors: Zhijun Zhang, Shiyi Zhou, Jiansheng Liu, Changhai Yu, Zhiyong Qin, Jianshuo Wang, Yuteng Cao, Liran Hao, Xuan Ye, Yan Lv

Abstract: Phase space control of particle beams is significant in the ultrafast pump-probe techniques for the generation of ultrashort pulses. However, the transient energy chirp which evolves rapidly at the acceleration beginning in an accelerator cannot be accurately diagnosed nowadays. Here we propose to reconstruct the transient energy chirp of ultrashort electron beam via tightly focused and chirped la… ▽ More Phase space control of particle beams is significant in the ultrafast pump-probe techniques for the generation of ultrashort pulses. However, the transient energy chirp which evolves rapidly at the acceleration beginning in an accelerator cannot be accurately diagnosed nowadays. Here we propose to reconstruct the transient energy chirp of ultrashort electron beam via tightly focused and chirped laser pulse. The conditions for strengthening the electron-beam divergence modulation are explored, and the transient chirp reconstruction based on the inherent phase correlation of the modulated divergence projected on specific phase space coordinates is demonstrated. In addition, the delay between the laser and the electron beam could be estimated directly at the frequency domain of the reconstructed divergence modulation after Fourier transform. This versatile method paves the way for the accelerator optimization and the timing jitter probe of ultrafast electron diffraction with attosecond accuracy. △ Less

Submitted 4 January, 2023; v1 submitted 22 December, 2022; originally announced December 2022.

Comments: 13 pages, 5 figures

Theory and Experiments of Pressure-Tunable Broadband Light Emission from Self-Trapped Excitons in Metal Halide Crystals

Authors: Shenyu Dai, Xinxin Xing, Viktor G. Hadjiev, Zhaojun Qin, Tian Tong, Guang Yang, Chong Wang, Lijuan Hou, Liangzi Deng, Zhiming Wang, Guoying Feng, Jiming Bao

Abstract: Hydrostatic pressure has been commonly applied to tune broadband light emissions from self-trapped excitons (STE) in perovskites for producing white light and study of basic electron-phonon interactions. However, a general theory is still lacking to understand pressure-driven evolution of STE emissions. In this work we first identify a theoretical model that predicts the effect of hydrostatic pres… ▽ More Hydrostatic pressure has been commonly applied to tune broadband light emissions from self-trapped excitons (STE) in perovskites for producing white light and study of basic electron-phonon interactions. However, a general theory is still lacking to understand pressure-driven evolution of STE emissions. In this work we first identify a theoretical model that predicts the effect of hydrostatic pressure on STE emission spectrum, we then report the observation of extremely broadband photoluminescence emission and its wide pressure spectral tuning in 2D indirect bandgap CsPb2Br5 crystals. An excellent agreement is found between the theory and experiment on the peculiar experimental observation of STE emission with a nearly constant spectral bandwidth but linearly increasing energy with pressure below 2 GPa. Further analysis by the theory and experiment under higher pressure reveals that two types of STE are involved and respond differently to external pressure. We subsequently survey published STE emissions and discovered that most of them show a spectral blue-shift under pressure, as predicted by the theory. The identification of an appropriate theoretical model and its application to STE emission through the coordinate configuration diagram paves the way for engineering the STE emission and basic understanding of electron-phonon interaction. △ Less

Submitted 23 September, 2022; originally announced September 2022.

Journal ref: Materials Today Physics 30 (2023): 100926

Design of the PMT underwater cascade implosion protection system for JUNO

Authors: Miao He, Zhonghua Qin, Shaojing Hou, Xiaoping Jing, Hongbang Liu, Zunjian Ke, Diru Wu, Wan Xie, Mehang Xu, Fang Chen, Junguang Lu, Yuekun Heng, Jiawen Zhang, Xiaoyan Ma, Zhipeng Du

Abstract: Photomultiplier tubes (PMTs) are widely used underwater in large-scale neutrino experiments. As a hollow glass spherelike structure, implosion is unavoidable during long-term operation under large water pressure. There is a possibility of cascade implosion to neighbor PMTs due to shockwave. Jiangmen Underground Neutrino Observatory designed a protection structure for each 20-inch PMT, consisting o… ▽ More Photomultiplier tubes (PMTs) are widely used underwater in large-scale neutrino experiments. As a hollow glass spherelike structure, implosion is unavoidable during long-term operation under large water pressure. There is a possibility of cascade implosion to neighbor PMTs due to shockwave. Jiangmen Underground Neutrino Observatory designed a protection structure for each 20-inch PMT, consisting of a top cover, a bottom cover, and their connection. This paper introduces the requirement and design of the PMT protection system, including the material selection, investigation of manufacture technology, and prototyping. Optimization and validation by simulation and underwater experiments are also presented. △ Less

Submitted 17 September, 2022; originally announced September 2022.

Comments: 10 pages, 15 figures

Check on the features of potted 20-inch PMTs with 1F3 electronics prototype at Pan-Asia

Authors: Caimei Liu, Min Li, Zhimin Wang, Jun Hu, Nikolay Anfimov, Lei Fan, Alberto Garfagnini, Guanghua Gong, Shaojing Hou, Beatrice Jelmini, Xiaolu Ji, Xiaoshan Jiang, Denis Korablev, Tobias Lachenmaier, Si Ma, Xiaoyan Ma, Zhe Ning, Alexander G. Olshevskiy, Zhaoyuan Peng, Zhonghua Qin, Andrea Serafini, Katharina von Sturm, Tobias Sterr, Yunhua Sun, Alexander Felix Tietzsch , et al. (12 additional authors not shown)

Abstract: The Jiangmen underground neutrino observatory (JUNO) is a neutrino project with a 20-kton liquid scintillator detector located at 700-m underground. The large 20-inch PMTs are one of the crucial components of the JUNO experiment aiming to precision neutrino measurements with better than 3% energy resolution at 1 MeV. The excellent energy resolution and a large fiducial volume provide many exciting… ▽ More The Jiangmen underground neutrino observatory (JUNO) is a neutrino project with a 20-kton liquid scintillator detector located at 700-m underground. The large 20-inch PMTs are one of the crucial components of the JUNO experiment aiming to precision neutrino measurements with better than 3% energy resolution at 1 MeV. The excellent energy resolution and a large fiducial volume provide many exciting opportunities for addressing important topics in neutrino and astro-particle physics. With the container #D at JUNO Pan-Asia PMT testing and potting station, the features of waterproof potted 20-inch PMTs were measured with JUNO 1F3 electronics prototype in waveform and charge, which are valuable for better understanding on the performance of the waterproof potted PMTs and the JUNO 1F3 electronics. In this paper, basic features of JUNO 1F3 electronics prototype run at Pan-Asia will be introduced, followed by an analysis of the waterproof potted 20-inch PMTs and a comparison with the results from commercial electronics used by the container #A and #B. △ Less

Submitted 17 August, 2022; originally announced August 2022.

Fast optical refocusing through multimode fiber bend using Cake-Cutting Hadamard encoding algorithm to improve robustness

Authors: Chuncheng Zhang, Zheyi Yao, Zhengyue Qin, Guohua Gu, Qian Chen, Zhihua Xie, Guodong Liu, Xiubao Sui

Abstract: Multimode fibres offer the advantages of high resolution and miniaturization over single mode fibers in the field of optical imaging. However, multimode fibre's imaging is susceptible to perturbations of MMF that can lead to secondary spatial distortions in the transmitted image. Perturbations include random disturbances in the fiber as well as environmental noise. Here, we exploit the fast focusi… ▽ More Multimode fibres offer the advantages of high resolution and miniaturization over single mode fibers in the field of optical imaging. However, multimode fibre's imaging is susceptible to perturbations of MMF that can lead to secondary spatial distortions in the transmitted image. Perturbations include random disturbances in the fiber as well as environmental noise. Here, we exploit the fast focusing capability of the Cake-Cutting Hadamard coding algorithm to counteract the effects of perturbations and improve the system's robustness. Simulation shows that it can approach the theoretical enhancement at 2000 measurements. Experimental results show that the algorithm can help the system to refocus in a short time when MMFs are perturbed. This research will further contribute to using multimode fibres in medicine, communication, and detection. △ Less

Submitted 27 July, 2022; originally announced July 2022.

Afterpulse measurement of JUNO 20-inch PMTs

Authors: Rong Zhao, Nikolay Anfimov, Yu Chen, Hang Hu, Jun Hu, Xiaolu Ji, Denis Korablev, Min Li, Alexander Olshevskiy, Zhaoyuan Peng, Arseny Rybnikov, Zhonghua Qin, Jun Wang, Wei Wang, Zhimin Wang, Björn Wonsak

Abstract: In this article we present the large photo-multiplier tube (PMT) afterpulse measurement results of Jiangmen Underground Neutrino Observatory (JUNO) experiment. Totally 11 dynode-PMTs (R12860) from Hamamatsu company and 150 micro-channel plate PMTs (MCP-PMTs, GDB-6201) from NNVT company were tested, an afterpulse model is built according to the afterpulse time distribution and probability of occurr… ▽ More In this article we present the large photo-multiplier tube (PMT) afterpulse measurement results of Jiangmen Underground Neutrino Observatory (JUNO) experiment. Totally 11 dynode-PMTs (R12860) from Hamamatsu company and 150 micro-channel plate PMTs (MCP-PMTs, GDB-6201) from NNVT company were tested, an afterpulse model is built according to the afterpulse time distribution and probability of occurrence for these two types of PMTs. The average ratio between the total afterpulse charge with the delay between 0.5 $μ$ s and 20 $μ$ s to the primary pulse charge is 5.6%(13.2%) for the tested MCP-PMTs (dynode-PMTs). JUNO experiment will deploy 20,012 20-inch PMTs, and this study will benefit the detector simulation, event reconstruction and data analysis of JUNO experiment. △ Less

Submitted 11 July, 2022; originally announced July 2022.

An FPGA-based Trigger System for CSHINE

Authors: Dong Guo, Yuhao Qin, Sheng Xiao, Zhi Qin, Yijie Wang, Fenhai Guan, Xinyue Diao, Boyuan Zhang, Yaopeng Zhang, Dawei Si, Shiwei Xu, Xianglun Wei, Herun Yang, Peng Ma, Tianli Qiu, Haichuan Zou, Limin Duan, Zhigang Xiao

Abstract: A trigger system of general function is designed using the commercial module CAEN V2495 for heavy ion nuclear reaction experiment at Fermi energies. The system has been applied and verified on CSHINE (Compact Spectrometer for Heavy IoN Experiment). Based on the field programmable logic gate array (FPGA) technology of command register access and remote computer control operation, trigger functions… ▽ More A trigger system of general function is designed using the commercial module CAEN V2495 for heavy ion nuclear reaction experiment at Fermi energies. The system has been applied and verified on CSHINE (Compact Spectrometer for Heavy IoN Experiment). Based on the field programmable logic gate array (FPGA) technology of command register access and remote computer control operation, trigger functions can be flexibly configured according to the experimental physical goals. Using the trigger system on CSHINE, we carried out the beam experiment of 25 MeV/u $ ^{86}{\rm Kr}+ ^{124}{\rm Sn}$ on the Radioactive Ion Beam Line 1 in Lanzhou (RIBLL1), China. The online results demonstrate that the trigger system works normally and correctly. The system can be extended to other experiments. △ Less

Submitted 30 June, 2022; originally announced June 2022.

Spurious currents suppression by accurate difference schemes in multiphase lattice Boltzmann method

Authors: Zhangrong Qin, Wenbo Chen, Chunyan Qin, Xin Xu, Binghai Wen

Abstract: Spurious currents, which are often observed near a curved interface in the multiphase simulations by diffuse interface methods, are unphysical phenomena and usually damage the computational accuracy and stability. In this paper, the origination and suppression of spurious currents are investigated by using the multiphase lattice Boltzmann method driven by chemical potential. Both the difference er… ▽ More Spurious currents, which are often observed near a curved interface in the multiphase simulations by diffuse interface methods, are unphysical phenomena and usually damage the computational accuracy and stability. In this paper, the origination and suppression of spurious currents are investigated by using the multiphase lattice Boltzmann method driven by chemical potential. Both the difference error and insufficient isotropy of discrete gradient operator give rise to the directional deviations of nonideal force and then originate the spurious currents. Nevertheless, the high-order finite difference produces far more accurate results than the high-order isotropic difference. We compare several finite difference schemes which have different formal accuracy and resolution. When a large proportional coefficient is used, the transition region is narrow and steep, and the resolution of finite difference indicates the computational accuracy more exactly than the formal accuracy. On the contrary, for a small proportional coefficient, the transition region is wide and gentle, and the formal accuracy of finite difference indicates the computational accuracy better than the resolution. Furthermore, numerical simulations show that the spurious currents calculated in the 3D situation are highly consistent with those in 2D simulations; especially, the two-phase coexistence densities calculated by the high-order accuracy finite difference are in excellent agreement with the theoretical predictions of the Maxwell equal-area construction till the reduced temperature 0.2. △ Less

Submitted 16 May, 2022; originally announced May 2022.

Prospects for Detecting the Diffuse Supernova Neutrino Background with JUNO

Authors: JUNO Collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Nikita Balashov, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Antonio Bergnoli, Thilo Birkenfeld, Sylvie Blin , et al. (577 additional authors not shown)

Abstract: We present the detection potential for the diffuse supernova neutrino background (DSNB) at the Jiangmen Underground Neutrino Observatory (JUNO), using the inverse-beta-decay (IBD) detection channel on free protons. We employ the latest information on the DSNB flux predictions, and investigate in detail the background and its reduction for the DSNB search at JUNO. The atmospheric neutrino induced n… ▽ More We present the detection potential for the diffuse supernova neutrino background (DSNB) at the Jiangmen Underground Neutrino Observatory (JUNO), using the inverse-beta-decay (IBD) detection channel on free protons. We employ the latest information on the DSNB flux predictions, and investigate in detail the background and its reduction for the DSNB search at JUNO. The atmospheric neutrino induced neutral current (NC) background turns out to be the most critical background, whose uncertainty is carefully evaluated from both the spread of model predictions and an envisaged \textit{in situ} measurement. We also make a careful study on the background suppression with the pulse shape discrimination (PSD) and triple coincidence (TC) cuts. With latest DSNB signal predictions, more realistic background evaluation and PSD efficiency optimization, and additional TC cut, JUNO can reach the significance of 3$σ$ for 3 years of data taking, and achieve better than 5$σ$ after 10 years for a reference DSNB model. In the pessimistic scenario of non-observation, JUNO would strongly improve the limits and exclude a significant region of the model parameter space. △ Less

Submitted 13 October, 2022; v1 submitted 18 May, 2022; originally announced May 2022.

Comments: 29 pages, 11 figures, final published version in JCAP

Journal ref: JCAP 10 (2022) 033

Mass Testing and Characterization of 20-inch PMTs for JUNO

Authors: Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Abid Aleem, Tsagkarakis Alexandros, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, Joao Pedro Athayde Marcondes de Andre, Didier Auguste, Weidong Bai, Nikita Balashov, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Antonio Bergnoli , et al. (541 additional authors not shown)

Abstract: Main goal of the JUNO experiment is to determine the neutrino mass ordering using a 20kt liquid-scintillator detector. Its key feature is an excellent energy resolution of at least 3 % at 1 MeV, for which its instruments need to meet a certain quality and thus have to be fully characterized. More than 20,000 20-inch PMTs have been received and assessed by JUNO after a detailed testing program whic… ▽ More Main goal of the JUNO experiment is to determine the neutrino mass ordering using a 20kt liquid-scintillator detector. Its key feature is an excellent energy resolution of at least 3 % at 1 MeV, for which its instruments need to meet a certain quality and thus have to be fully characterized. More than 20,000 20-inch PMTs have been received and assessed by JUNO after a detailed testing program which began in 2017 and elapsed for about four years. Based on this mass characterization and a set of specific requirements, a good quality of all accepted PMTs could be ascertained. This paper presents the performed testing procedure with the designed testing systems as well as the statistical characteristics of all 20-inch PMTs intended to be used in the JUNO experiment, covering more than fifteen performance parameters including the photocathode uniformity. This constitutes the largest sample of 20-inch PMTs ever produced and studied in detail to date, i.e. 15,000 of the newly developed 20-inch MCP-PMTs from Northern Night Vision Technology Co. (NNVT) and 5,000 of dynode PMTs from Hamamatsu Photonics K. K.(HPK). △ Less

Submitted 17 September, 2022; v1 submitted 17 May, 2022; originally announced May 2022.

The consistent behavior of negative Poissons ratio with interlayer interactions

Authors: Yancong Wang, Linfeng Yu, Fa Zhang, Qiang Chen, Yuqi Zhan, Xiong Zheng, Huimin Wang, Zhenzhen Qin, Guangzhao Qin

Abstract: Negative Poissons ratio (NPR) is of great interest due to the novel applications in lots of fields. Films are the most commonly used form in practical applications, which involves multiple layers. However, the effect of interlayer interactions on the NPR is still unclear. In this study, based on first principles calculations, we systematically investigate the effect of interlayer interactions on t… ▽ More Negative Poissons ratio (NPR) is of great interest due to the novel applications in lots of fields. Films are the most commonly used form in practical applications, which involves multiple layers. However, the effect of interlayer interactions on the NPR is still unclear. In this study, based on first principles calculations, we systematically investigate the effect of interlayer interactions on the NPR by comparably studying single-layer graphene, few-layer graphene, h-BN, and graphene-BN heterostructure. It is found that they almost have the same geometry-strain response. Consequently, the NPR in bilayer graphene, triple-layer graphene, and graphene-BN heterostructure are consistent with that in single-layer graphene and h-BN. The fundamental mechanism lies in that the response to strain of the orbital coupling are consistent under the effect of interlayer interactions. The deep understanding of the NPR with the effect of interlayer interactions as achieved in this study is beneficial for the future design and development of micro-/nanoscale electromechanical devices with novel functions based on nanostructures. △ Less

Submitted 23 February, 2022; originally announced February 2022.

Accessing negative Poisson`s ratio of graphene by machine learning interatomic potentials

Authors: Jing Wu, E Zhou, Zhenzhen Qin, Xiaoliang Zhang, Guangzhao Qin

Abstract: The negative Poisson`s ratio (NPR) is a novel property of materials, which enhances the mechanical feature and creates a wide range of application prospects in lots of fields, such as aerospace, electronics, medicine, etc. Fundamental understanding on the mechanism underlying NPR plays an important role in designing advanced mechanical functional materials. However, with different methods used, th… ▽ More The negative Poisson`s ratio (NPR) is a novel property of materials, which enhances the mechanical feature and creates a wide range of application prospects in lots of fields, such as aerospace, electronics, medicine, etc. Fundamental understanding on the mechanism underlying NPR plays an important role in designing advanced mechanical functional materials. However, with different methods used, the origin of NPR is found different and conflicting with each other, for instance, in the representative graphene. In this study, based on machine learning technique, we constructed a moment tensor potential (MTP) for molecular dynamics (MD) simulations of graphene. By analyzing the evolution of key geometries, the increase of bond angle is found to be responsible for the NPR of graphene instead of bond length. The results on the origin of NPR are well consistent with the start-of-art first-principles, which amend the results from MD simulations using classic empirical potentials. Our study facilitates the understanding on the origin of NPR of graphene and paves the way to improve the accuracy of MD simulations being comparable to first-principle calculations. Our study would also promote the applications of machine learning interatomic potentials in multiscale simulations of functional materials. *Author △ Less

Submitted 17 February, 2022; originally announced February 2022.

Identifying optimal photovoltaic technologies for underwater applications

Authors: Jason A. Röhr, Ed Sartor, Joel N. Duenow, Zilun Qin, Juan Meng, Jason Lipton, Stephen A. Maclean, Udo Römer, Michael P. Nielsen, Suling Zhao, Jaemin Kong, Matthew O. Reese, Myles A. Steiner, N. J. Ekins-Daukes, André D. Taylor

Abstract: Improving solar energy collection in aquatic environments would allow for superior environmental monitoring and remote sensing, but the identification of optimal photovoltaic technologies for such applications is challenging as evaluation requires either field deployment or access to large water tanks. Here, we present a simple bench-top characterization technique that does not require direct acce… ▽ More Improving solar energy collection in aquatic environments would allow for superior environmental monitoring and remote sensing, but the identification of optimal photovoltaic technologies for such applications is challenging as evaluation requires either field deployment or access to large water tanks. Here, we present a simple bench-top characterization technique that does not require direct access to water and therefore circumvents the need for field testing during initial trials of development. Employing LEDs to simulate underwater solar spectra at various depths, we compare Si and CdTe solar cells, two commercially available technologies, with GaInP cells, a technology with a wide band gap close to ideal for underwater solar harvesting. We use this method to show that while Si cells outperform both CdTe and GaInP under terrestrial AM1.5G solar irradiance, both CdTe and GaInP outperform Si at depths > 2 m, with GaInP cells operating with underwater efficiencies exceeding 51%. △ Less

Submitted 1 June, 2022; v1 submitted 24 October, 2021; originally announced October 2021.

Comments: All supplementary information can be found at the end of the main text (before References); 17 pages; 4 main figures; Manuscript has been accepted into iScience

Track Recognition for the $ΔE-E$ Telescopes with Silicon Strip Detectors

Authors: Fenhai Guan, Yijie Wang, Xinyue Diao, Yuhao Qin, Zhi Qin, Dong Guo, Qianghua Wu, Dawei Si, Sheng Xiao, Boyuan Zhang, Yaopeng Zhang, Xuan Zhao, Zhigang Xiao

Abstract: For the high granularity and high energy resolution, Silicon Strip Detector (SSD) is widely applied in assembling telescopes to measure the charged particles in heavy ion reactions. In this paper, we present a novel method to achieve track recognition in the SSD telescopes of the Compact Spectrometer for Heavy Ion Experiment (CSHINE). Each telescope consists of a single-sided silicon strip detecto… ▽ More For the high granularity and high energy resolution, Silicon Strip Detector (SSD) is widely applied in assembling telescopes to measure the charged particles in heavy ion reactions. In this paper, we present a novel method to achieve track recognition in the SSD telescopes of the Compact Spectrometer for Heavy Ion Experiment (CSHINE). Each telescope consists of a single-sided silicon strip detector (SSSSD) and a double-sided silicon strip detector (DSSSD) backed by $3 \times 3$ CsI(Tl) crystals. Detector calibration and track reconstruction are implemented. Special decoding algorithm is developed for the multi-track recognition procedure to deal with the multi-hit effect convoluted by charge sharing and the missing signals with certain probability. It is demonstrated that the track recognition efficiency of the method is approximately 90\% and 80\% for the DSSSD-CsI and SSSSD-DSSSD events, respectively. △ Less

Submitted 6 January, 2022; v1 submitted 18 October, 2021; originally announced October 2021.

Comments: 24 pages, 10 figures, 4 tables, 2 pages appendix

The Spatiotemporal Evolution of Temperature During Transient Heating of Nanoparticle Arrays

Authors: Chen Xie, Zhenpeng Qin

Abstract: Nanoparticle (NP) are promising agents to absorb external energy excitation and generate heat. Cluster of NPs or NP array heating have found essential roles for biomedical applications, diagnostic techniques and chemical catalysis. Various studies have shed light on the heat transfer of nanostructures and greatly advanced our understanding of NP array heating. However, there is a lack of analytica… ▽ More Nanoparticle (NP) are promising agents to absorb external energy excitation and generate heat. Cluster of NPs or NP array heating have found essential roles for biomedical applications, diagnostic techniques and chemical catalysis. Various studies have shed light on the heat transfer of nanostructures and greatly advanced our understanding of NP array heating. However, there is a lack of analytical tools and dimensionless parameters to describe the transient heating of NP arrays. Here we demonstrate a comprehensive analysis of the transient NP array heating. Firstly, we developed analytical solution for the NP array heating and provide a useful mathematical description of the spatial-temporal evolution of temperature for 2D, 3D and spherical NP array heating. Based on this, we proposed the idea of thermal resolution that quantifies the relationship between minimal heating time, NP array size, energy intensity and target temperature. Lastly, we define a dimensionless parameter that characterize the transition from confined heating to delocalized heating. This study advances the in-depth understanding of nanomaterials heating and provides guidance for rationally designing innovative approaches for NP array heating. △ Less

Submitted 2 September, 2021; originally announced September 2021.

Radioactivity control strategy for the JUNO detector

Authors: JUNO collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Andrej Babic, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Antonio Bergnoli, Thilo Birkenfeld, Sylvie Blin , et al. (578 additional authors not shown)

Abstract: JUNO is a massive liquid scintillator detector with a primary scientific goal of determining the neutrino mass ordering by studying the oscillated anti-neutrino flux coming from two nuclear power plants at 53 km distance. The expected signal anti-neutrino interaction rate is only 60 counts per day, therefore a careful control of the background sources due to radioactivity is critical. In particula… ▽ More JUNO is a massive liquid scintillator detector with a primary scientific goal of determining the neutrino mass ordering by studying the oscillated anti-neutrino flux coming from two nuclear power plants at 53 km distance. The expected signal anti-neutrino interaction rate is only 60 counts per day, therefore a careful control of the background sources due to radioactivity is critical. In particular, natural radioactivity present in all materials and in the environment represents a serious issue that could impair the sensitivity of the experiment if appropriate countermeasures were not foreseen. In this paper we discuss the background reduction strategies undertaken by the JUNO collaboration to reduce at minimum the impact of natural radioactivity. We describe our efforts for an optimized experimental design, a careful material screening and accurate detector production handling, and a constant control of the expected results through a meticulous Monte Carlo simulation program. We show that all these actions should allow us to keep the background count rate safely below the target value of 10 Hz in the default fiducial volume, above an energy threshold of 0.7 MeV. △ Less

Submitted 13 October, 2021; v1 submitted 8 July, 2021; originally announced July 2021.

Comments: 35 pages, 12 figures

Beam power scale-up in MEMS based multi-beam ion accelerators

Authors: Q. Ji, K. K. Afridi, T. Bauer, G. Giesbrecht, Y. Hou, A. Lal, D. Ni, A. Persaud, Z. Qin, P. Seidl, S. Sinha, T. Schenkel

Abstract: We report on the development of multi-beam RF linear ion accelerators that are formed from stacks of low cost wafers and describe the status of beam power scale-up using an array of 120 beams. The total argon ion current extracted from the 120-beamlet extraction column was 0.5 mA. The measured energy gain in each RF gap reached as high as 7.25 keV. We present a path of using this technology to ach… ▽ More We report on the development of multi-beam RF linear ion accelerators that are formed from stacks of low cost wafers and describe the status of beam power scale-up using an array of 120 beams. The total argon ion current extracted from the 120-beamlet extraction column was 0.5 mA. The measured energy gain in each RF gap reached as high as 7.25 keV. We present a path of using this technology to achieve ion currents >1 mA and ion energies >100 keV for applications in materials processing. △ Less

Submitted 21 May, 2021; originally announced May 2021.

Journal ref: Review of Scientific Instruments 92, 103301 (2021)

The Design and Sensitivity of JUNO's scintillator radiopurity pre-detector OSIRIS

Authors: JUNO Collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Fengpeng An, Guangpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Andrej Babic, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Antonio Bergnoli, Thilo Birkenfeld , et al. (582 additional authors not shown)

Abstract: The OSIRIS detector is a subsystem of the liquid scintillator fillling chain of the JUNO reactor neutrino experiment. Its purpose is to validate the radiopurity of the scintillator to assure that all components of the JUNO scintillator system work to specifications and only neutrino-grade scintillator is filled into the JUNO Central Detector. The aspired sensitivity level of $10^{-16}$ g/g of… ▽ More The OSIRIS detector is a subsystem of the liquid scintillator fillling chain of the JUNO reactor neutrino experiment. Its purpose is to validate the radiopurity of the scintillator to assure that all components of the JUNO scintillator system work to specifications and only neutrino-grade scintillator is filled into the JUNO Central Detector. The aspired sensitivity level of $10^{-16}$ g/g of $^{238}$U and $^{232}$Th requires a large ($\sim$20 m$^3$) detection volume and ultralow background levels. The present paper reports on the design and major components of the OSIRIS detector, the detector simulation as well as the measuring strategies foreseen and the sensitivity levels to U/Th that can be reached in this setup. △ Less

Submitted 31 March, 2021; originally announced March 2021.

Comments: 32 pages, 22 figures

Gain and charge response of 20 inch MCP and dynode PMTs

Authors: H. Q. Zhang, Z. M. Wang, F. J. Luo, A. B. Yang, D. R. Wu, Y. C. Li, Z. H. Qin, C. G. Yang, Y. K. Heng, Y. F. Wang, H. S. Chen

Abstract: JUNO is a 20-kton liquid scintillator detector aiming to determine the neutrino mass ordering, precisely measure the oscillation parameters, detect the astrophysical neutrinos and search for exotic physics. It is designed to reach an energy resolution of 3% at 1 MeV with the highest ever PMT coverage, using two types of 20 inch phototubes: MCP-PMT from NNVT and dynode-PMT from Hamamatsu. In this a… ▽ More JUNO is a 20-kton liquid scintillator detector aiming to determine the neutrino mass ordering, precisely measure the oscillation parameters, detect the astrophysical neutrinos and search for exotic physics. It is designed to reach an energy resolution of 3% at 1 MeV with the highest ever PMT coverage, using two types of 20 inch phototubes: MCP-PMT from NNVT and dynode-PMT from Hamamatsu. In this article, the gain and charge response of the MCP and dynode PMTs are investigated with the study of JUNO Central Detector prototype. The linearity of the MCP-PMT charge output is measured too to check the effect of a long tail on its charge spectrum. △ Less

Submitted 27 March, 2021; originally announced March 2021.

A container-based facility for testing 20'000 20-inch PMTs for JUNO

Authors: Björn Wonsak, Alexander Tietzsch, Tobias Sterr, Tobias Lachenmaier, Nikolay Anfimov, David Blum, Caren Hagner, Benedict Kaiser, David Meyhöfer, Alexander Olshevskiy, Zhonghua Qin, Henning Rebber, Simon Reichert, Malte Stender, Wei Wang, Zhimin Wang

Abstract: The main goal of the JUNO experiment is the determination of the neutrino mass ordering. To achieve this, an extraordinary energy resolution of at least $3\,\%$ at $1\,$MeV is required for which all parts of the JUNO detector need to meet certain quality criteria. This is relevant in particular for those which are related to the energy resolution of the detector, such as the photomultiplier tubes… ▽ More The main goal of the JUNO experiment is the determination of the neutrino mass ordering. To achieve this, an extraordinary energy resolution of at least $3\,\%$ at $1\,$MeV is required for which all parts of the JUNO detector need to meet certain quality criteria. This is relevant in particular for those which are related to the energy resolution of the detector, such as the photomultiplier tubes (PMTs) to be deployed in JUNO. This paper presents the setup and performance of a dedicated PMT mass testing facility to examine and characterize the performance of the 20-inch JUNO PMTs. Its quasi-industrial size and operation level allows to test all 20000 PMTs intended to be used in the JUNO experiment. With this PMT mass testing system, several key characteristics like dark count rate, peak-to-valley ratio, photon detection efficiency, and timing resolution have been determined at an operating gain of $1\times10^7$ and assessed with respect to the requirements of JUNO. Measurement conditions and modes for the PMTs as well as estimated accuracies for the determination of the individual PMT parameters with the system are presented as well. △ Less

Submitted 14 May, 2021; v1 submitted 18 March, 2021; originally announced March 2021.

Comments: 21 pages, 17 figures, corresponding author Björn Wonsak, prepared for submission to JINST, revision due to review process of journal

Aqueous humor dynamics in human eyes: a lattice Boltzmann study

Authors: Zhangrong Qin, Lingjuan Meng, Fan Yang, Chaoying Zhang, Binghai Wen

Abstract: This paper presents a lattice Boltzmann model to simulate the aqueous humor (AH) dynamics in the human eyes by involving incompressible Navier-Stokes flow, heat convection and diffusion, and Darcy seepage flow. Verifying simulations indicate that the model is stable, convergent and robust. Further investigations were carried out, including the effects of heat convection and buoyancy, AH production… ▽ More This paper presents a lattice Boltzmann model to simulate the aqueous humor (AH) dynamics in the human eyes by involving incompressible Navier-Stokes flow, heat convection and diffusion, and Darcy seepage flow. Verifying simulations indicate that the model is stable, convergent and robust. Further investigations were carried out, including the effects of heat convection and buoyancy, AH production rate, permeability of trabecular meshwork, viscosity of AH and anterior chamber angle on intraocular pressure (IOP). The heat convection and diffusion can significantly affect the flow patterns in the healthy eye, and the IOP can be controlled by increasing the anterior chamber angle or decreasing the secretion rate, the drainage resistance and viscosity of AH. However, the IOP is insensitive to the viscosity of the AH, which may be one of the causes that the viscosity would not have been considered as a factor for controlling the IOP. It's interesting that all these factors have more significant influences on the IOP in pathologic eyes than healthy ones. The temperature difference and the eye-orientation have obvious influence on the cornea and iris wall shear stresses. The present model and simulation results are expected to provide an alternative tool and theoretical reference for the study of AH dynamics. △ Less

Submitted 24 February, 2021; originally announced February 2021.

Comments: 24 pages, 12 figures, 8 tables

CSHINE for studies of HBT correlation in Heavy Ion Reactions

Authors: Yi-Jie Wang, Fen-Hai Guan, Xin-Yue Diao, Qiang-Hua Wu, Xiang-Lun Wei, He-Run Yang, Peng Ma, Zhi Qin, Yu-Hao Qin, Dong Guo, Rong-Jiang Hu, Li-Min Duan, Zhi-Gang Xiao

Abstract: The Compact Spectrometer for Heavy Ion Experiment (CSHINE) is under construction for the study of isospin chronology via the Hanbury Brown$-$Twiss (HBT) particle correlation function and the nuclear equation of state of asymmetrical nuclear matter. The CSHINE consists of silicon strip detector (SSD) telescopes and large-area parallel plate avalanche counters, which measure the light charged partic… ▽ More The Compact Spectrometer for Heavy Ion Experiment (CSHINE) is under construction for the study of isospin chronology via the Hanbury Brown$-$Twiss (HBT) particle correlation function and the nuclear equation of state of asymmetrical nuclear matter. The CSHINE consists of silicon strip detector (SSD) telescopes and large-area parallel plate avalanche counters, which measure the light charged particles and fission fragments, respectively. In phase I, two SSD telescopes were used to observe 30 MeV/u $^{40}$Ar +$^{197}$Au reactions. The results presented here demonstrate that hydrogen and helium were observed with high isotopic resolution, and the HBT correlation functions of light charged particles could be constructed from the obtained data. △ Less

Submitted 14 January, 2021; originally announced January 2021.

Calibration Strategy of the JUNO Experiment

Authors: JUNO collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Fengpeng An, Guangpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Andrej Babic, Wander Baldini, Andrea Barresi, Eric Baussan, Marco Bellato, Antonio Bergnoli, Enrico Bernieri, Thilo Birkenfeld , et al. (571 additional authors not shown)

Abstract: We present the calibration strategy for the 20 kton liquid scintillator central detector of the Jiangmen Underground Neutrino Observatory (JUNO). By utilizing a comprehensive multiple-source and multiple-positional calibration program, in combination with a novel dual calorimetry technique exploiting two independent photosensors and readout systems, we demonstrate that the JUNO central detector ca… ▽ More We present the calibration strategy for the 20 kton liquid scintillator central detector of the Jiangmen Underground Neutrino Observatory (JUNO). By utilizing a comprehensive multiple-source and multiple-positional calibration program, in combination with a novel dual calorimetry technique exploiting two independent photosensors and readout systems, we demonstrate that the JUNO central detector can achieve a better than 1% energy linearity and a 3% effective energy resolution, required by the neutrino mass ordering determination. △ Less

Submitted 20 January, 2021; v1 submitted 12 November, 2020; originally announced November 2020.

Microwave Photonic Ising Machine

Authors: Qizhuang Cen, Tengfei Hao, Hao Ding, Shanhong Guan, Zhiqiang Qin, Kun Xu, Yitang Dai, Ming Li

Abstract: Ising machines based on analog systems have the potential of acceleration in solving ubiquitous combinatorial optimization problems. Although some artificial spins to support large-scale Ising machine is reported, e.g. superconducting qubits in quantum annealers and short optical pulses in coherent Ising machines, the spin coherence is fragile due to the ultra-low equivalent temperature or optical… ▽ More Ising machines based on analog systems have the potential of acceleration in solving ubiquitous combinatorial optimization problems. Although some artificial spins to support large-scale Ising machine is reported, e.g. superconducting qubits in quantum annealers and short optical pulses in coherent Ising machines, the spin coherence is fragile due to the ultra-low equivalent temperature or optical phase sensitivity. In this paper, we propose to use short microwave pulses generated from an optoelectronic parametric oscillator as the spins to implement the Ising machine with large scale and also high coherence under room temperature. The proposed machine supports 10,000 spins, and the high coherence leads to accurate computation. Moreover, the Ising machine is highly compatible with high-speed electronic devices for programmability, paving a low-cost, accurate, and easy-to-implement way toward to solve real-world optimization problems. △ Less

Submitted 18 September, 2020; originally announced November 2020.

Optimising Stochastic Routing for Taxi Fleets with Model Enhanced Reinforcement Learning

Authors: Shen Ren, Qianxiao Li, Liye Zhang, Zheng Qin, Bo Yang

Abstract: The future of mobility-as-a-Service (Maas)should embrace an integrated system of ride-hailing, street-hailing and ride-sharing with optimised intelligent vehicle routing in response to a real-time, stochastic demand pattern. We aim to optimise routing policies for a large fleet of vehicles for street-hailing services, given a stochastic demand pattern in small to medium-sized road networks. A mode… ▽ More The future of mobility-as-a-Service (Maas)should embrace an integrated system of ride-hailing, street-hailing and ride-sharing with optimised intelligent vehicle routing in response to a real-time, stochastic demand pattern. We aim to optimise routing policies for a large fleet of vehicles for street-hailing services, given a stochastic demand pattern in small to medium-sized road networks. A model-based dispatch algorithm, a high performance model-free reinforcement learning based algorithm and a novel hybrid algorithm combining the benefits of both the top-down approach and the model-free reinforcement learning have been proposed to route the \emph{vacant} vehicles. We design our reinforcement learning based routing algorithm using proximal policy optimisation and combined intrinsic and extrinsic rewards to strike a balance between exploration and exploitation. Using a large-scale agent-based microscopic simulation platform to evaluate our proposed algorithms, our model-free reinforcement learning and hybrid algorithm show excellent performance on both artificial road network and community-based Singapore road network with empirical demands, and our hybrid algorithm can significantly accelerate the model-free learner in the process of learning. △ Less

Submitted 22 October, 2020; originally announced October 2020.

Comments: 24 pages, comments welcome

Clinically Translatable Direct Patlak Reconstruction from Dynamic PET with Motion Correction Using Convolutional Neural Network

Authors: Nuobei Xie, Kuang Gong, Ning Guo, Zhixing Qin, Jianan Cui, Zhifang Wu, Huafeng Liu, Quanzheng Li

Abstract: Patlak model is widely used in 18F-FDG dynamic positron emission tomography (PET) imaging, where the estimated parametric images reveal important biochemical and physiology information. Because of better noise modeling and more information extracted from raw sinogram, direct Patlak reconstruction gains its popularity over the indirect approach which utilizes reconstructed dynamic PET images alone.… ▽ More Patlak model is widely used in 18F-FDG dynamic positron emission tomography (PET) imaging, where the estimated parametric images reveal important biochemical and physiology information. Because of better noise modeling and more information extracted from raw sinogram, direct Patlak reconstruction gains its popularity over the indirect approach which utilizes reconstructed dynamic PET images alone. As the prerequisite of direct Patlak methods, raw data from dynamic PET are rarely stored in clinics and difficult to obtain. In addition, the direct reconstruction is time-consuming due to the bottleneck of multiple-frame reconstruction. All of these impede the clinical adoption of direct Patlak reconstruction.In this work, we proposed a data-driven framework which maps the dynamic PET images to the high-quality motion-corrected direct Patlak images through a convolutional neural network. For the patient motion during the long period of dynamic PET scan, we combined the correction with the backward/forward projection in direct reconstruction to better fit the statistical model. Results based on fifteen clinical 18F-FDG dynamic brain PET datasets demonstrates the superiority of the proposed framework over Gaussian, nonlocal mean and BM4D denoising, regarding the image bias and contrast-to-noise ratio. △ Less

Submitted 12 September, 2020; originally announced September 2020.

Comments: Accepted to MICCAI 2020

Coupling of Light and Mechanics in a Photonic Crystal Waveguide

Authors: J. -B. Béguin, Z. Qin, X. Luan, H. J. Kimble

Abstract: Observations of thermally driven transverse vibration of a photonic crystal waveguide (PCW) are reported. The PCW consists of two parallel nanobeams with a 240 nm vacuum gap between the beams. Models are developed and validated for the transduction of beam motion to phase and amplitude modulation of a weak optical probe propagating in a guided mode (GM) of the PCW for probe frequencies far from an… ▽ More Observations of thermally driven transverse vibration of a photonic crystal waveguide (PCW) are reported. The PCW consists of two parallel nanobeams with a 240 nm vacuum gap between the beams. Models are developed and validated for the transduction of beam motion to phase and amplitude modulation of a weak optical probe propagating in a guided mode (GM) of the PCW for probe frequencies far from and near to the dielectric band edge. Since our PCW has been designed for near-field atom trapping, this research provides a foundation for evaluating possible deleterious effects of thermal motion on optical atomic traps near the surfaces of PCWs. Longer term goals are to achieve strong atom-mediated links between individual phonons of vibration and single photons propagating in the GMs of the PCW, thereby enabling opto-mechanics at the quantum level with atoms, photons, and phonons. The experiments and models reported here provide a basis for assessing such goals, including sensing mechanical motion at the Standard Quantum Limit (SQL). △ Less

Submitted 25 July, 2020; originally announced July 2020.

Comments: 13 pages, 13 figures

Optimization of the JUNO liquid scintillator composition using a Daya Bay antineutrino detector

Authors: Daya Bay, JUNO collaborations, :, A. Abusleme, T. Adam, S. Ahmad, S. Aiello, M. Akram, N. Ali, F. P. An, G. P. An, Q. An, G. Andronico, N. Anfimov, V. Antonelli, T. Antoshkina, B. Asavapibhop, J. P. A. M. de André, A. Babic, A. B. Balantekin, W. Baldini, M. Baldoncini, H. R. Band, A. Barresi, E. Baussan , et al. (642 additional authors not shown)

Abstract: To maximize the light yield of the liquid scintillator (LS) for the Jiangmen Underground Neutrino Observatory (JUNO), a 20 t LS sample was produced in a pilot plant at Daya Bay. The optical properties of the new LS in various compositions were studied by replacing the gadolinium-loaded LS in one antineutrino detector. The concentrations of the fluor, PPO, and the wavelength shifter, bis-MSB, were… ▽ More To maximize the light yield of the liquid scintillator (LS) for the Jiangmen Underground Neutrino Observatory (JUNO), a 20 t LS sample was produced in a pilot plant at Daya Bay. The optical properties of the new LS in various compositions were studied by replacing the gadolinium-loaded LS in one antineutrino detector. The concentrations of the fluor, PPO, and the wavelength shifter, bis-MSB, were increased in 12 steps from 0.5 g/L and <0.01 mg/L to 4 g/L and 13 mg/L, respectively. The numbers of total detected photoelectrons suggest that, with the optically purified solvent, the bis-MSB concentration does not need to be more than 4 mg/L. To bridge the one order of magnitude in the detector size difference between Daya Bay and JUNO, the Daya Bay data were used to tune the parameters of a newly developed optical model. Then, the model and tuned parameters were used in the JUNO simulation. This enabled to determine the optimal composition for the JUNO LS: purified solvent LAB with 2.5 g/L PPO, and 1 to 4 mg/L bis-MSB. △ Less

Submitted 1 July, 2020; originally announced July 2020.

Comments: 13 pages, 8 figures

Feasibility and physics potential of detecting $^8$B solar neutrinos at JUNO

Authors: JUNO collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Sebastiano Aiello, Muhammad Akram, Nawab Ali, Fengpeng An, Guangpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Andrej Babic, Wander Baldini, Andrea Barresi, Eric Baussan, Marco Bellato, Antonio Bergnoli, Enrico Bernieri, David Biare , et al. (572 additional authors not shown)

Abstract: The Jiangmen Underground Neutrino Observatory~(JUNO) features a 20~kt multi-purpose underground liquid scintillator sphere as its main detector. Some of JUNO's features make it an excellent experiment for $^8$B solar neutrino measurements, such as its low-energy threshold, its high energy resolution compared to water Cherenkov detectors, and its much large target mass compared to previous liquid s… ▽ More The Jiangmen Underground Neutrino Observatory~(JUNO) features a 20~kt multi-purpose underground liquid scintillator sphere as its main detector. Some of JUNO's features make it an excellent experiment for $^8$B solar neutrino measurements, such as its low-energy threshold, its high energy resolution compared to water Cherenkov detectors, and its much large target mass compared to previous liquid scintillator detectors. In this paper we present a comprehensive assessment of JUNO's potential for detecting $^8$B solar neutrinos via the neutrino-electron elastic scattering process. A reduced 2~MeV threshold on the recoil electron energy is found to be achievable assuming the intrinsic radioactive background $^{238}$U and $^{232}$Th in the liquid scintillator can be controlled to 10$^{-17}$~g/g. With ten years of data taking, about 60,000 signal and 30,000 background events are expected. This large sample will enable an examination of the distortion of the recoil electron spectrum that is dominated by the neutrino flavor transformation in the dense solar matter, which will shed new light on the tension between the measured electron spectra and the predictions of the standard three-flavor neutrino oscillation framework. If $Δm^{2}_{21}=4.8\times10^{-5}~(7.5\times10^{-5})$~eV$^{2}$, JUNO can provide evidence of neutrino oscillation in the Earth at the about 3$σ$~(2$σ$) level by measuring the non-zero signal rate variation with respect to the solar zenith angle. Moveover, JUNO can simultaneously measure $Δm^2_{21}$ using $^8$B solar neutrinos to a precision of 20\% or better depending on the central value and to sub-percent precision using reactor antineutrinos. A comparison of these two measurements from the same detector will help elucidate the current tension between the value of $Δm^2_{21}$ reported by solar neutrino experiments and the KamLAND experiment. △ Less

Submitted 21 June, 2020; originally announced June 2020.

Comments: 29 pages, 14 plots, 7 tables

TAO Conceptual Design Report: A Precision Measurement of the Reactor Antineutrino Spectrum with Sub-percent Energy Resolution

Authors: JUNO Collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Sebastiano Aiello, Muhammad Akram, Nawab Ali, Fengpeng An, Guangpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Andrej Babic, Wander Baldini, Andrea Barresi, Eric Baussan, Marco Bellato, Antonio Bergnoli, Enrico Bernieri, David Biare , et al. (568 additional authors not shown)

Abstract: The Taishan Antineutrino Observatory (TAO, also known as JUNO-TAO) is a satellite experiment of the Jiangmen Underground Neutrino Observatory (JUNO). A ton-level liquid scintillator detector will be placed at about 30 m from a core of the Taishan Nuclear Power Plant. The reactor antineutrino spectrum will be measured with sub-percent energy resolution, to provide a reference spectrum for future re… ▽ More The Taishan Antineutrino Observatory (TAO, also known as JUNO-TAO) is a satellite experiment of the Jiangmen Underground Neutrino Observatory (JUNO). A ton-level liquid scintillator detector will be placed at about 30 m from a core of the Taishan Nuclear Power Plant. The reactor antineutrino spectrum will be measured with sub-percent energy resolution, to provide a reference spectrum for future reactor neutrino experiments, and to provide a benchmark measurement to test nuclear databases. A spherical acrylic vessel containing 2.8 ton gadolinium-doped liquid scintillator will be viewed by 10 m^2 Silicon Photomultipliers (SiPMs) of >50% photon detection efficiency with almost full coverage. The photoelectron yield is about 4500 per MeV, an order higher than any existing large-scale liquid scintillator detectors. The detector operates at -50 degree C to lower the dark noise of SiPMs to an acceptable level. The detector will measure about 2000 reactor antineutrinos per day, and is designed to be well shielded from cosmogenic backgrounds and ambient radioactivities to have about 10% background-to-signal ratio. The experiment is expected to start operation in 2022. △ Less

Submitted 18 May, 2020; originally announced May 2020.

Comments: 134 pages, 114 figures