Showing 1–32 of 32 results for author: Riemensberger, J

Integrated Triply Resonant Electro-Optic Frequency Comb in Lithium Tantalate

Authors: Junyin Zhang, Chengli Wang, Connor Denney, Grigory Lihachev, Jianqi Hu, Wil Kao, Terence Blésin, Nikolai Kuznetsov, Zihan Li, Mikhail Churaev, Xin Ou, Johann Riemensberger, Gabriel Santamaria-Botello, Tobias J. Kippenberg

Abstract: Integrated frequency comb generators based on Kerr parametric oscillation have led to chip-scale, gigahertz-spaced combs with new applications spanning hyperscale telecommunications, low-noise microwave synthesis, LiDAR, and astrophysical spectrometer calibration. Recent progress in lithium niobate (LN) photonic integrated circuits (PICs) has resulted in chip-scale electro-optic (EO) frequency com… ▽ More Integrated frequency comb generators based on Kerr parametric oscillation have led to chip-scale, gigahertz-spaced combs with new applications spanning hyperscale telecommunications, low-noise microwave synthesis, LiDAR, and astrophysical spectrometer calibration. Recent progress in lithium niobate (LN) photonic integrated circuits (PICs) has resulted in chip-scale electro-optic (EO) frequency combs, offering precise comb-line positioning and simple operation without relying on the formation of dissipative Kerr solitons. However, current integrated EO combs face limited spectral coverage due to the large microwave power required to drive the non-resonant capacitive electrodes and the strong intrinsic birefringence of Lithium Niobate. Here, we overcome both challenges with an integrated triply resonant architecture, combining monolithic microwave integrated circuits (MMICs) with PICs based on the recently emerged thin-film lithium tantalate. With resonantly enhanced EO interaction and reduced birefringence in Lithium Tantalate, we achieve a four-fold comb span extension and a 16-fold power reduction compared to the conventional non-resonant microwave design. Driven by a hybrid-integrated laser diode, the comb spans over 450nm (60THz) with >2000 lines, and the generator fits within a compact 1cm^2 footprint. We additionally observe that the strong EO coupling leads to an increased comb existence range approaching the full free spectral range of the optical microresonator. The ultra-broadband comb generator, combined with detuning-agnostic operation, could advance chip-scale spectrometry and ultra-low-noise millimeter wave synthesis and unlock octave-spanning EO combs. The methodology of co-designing microwave and optical resonators can be extended to a wide range of integrated electro-optics applications. △ Less

Submitted 27 June, 2024; originally announced June 2024.

Comments: Main text: 9 pages; SI: 20 pages

Foundry compatible, efficient wafer-scale manufacturing of ultra-low loss, high-density Si$_3$N$_4$ photonic integrated circuits

Authors: Xinru Ji, Rui Ning Wang, Yang Liu, Johann Riemensberger, Zheru Qiu, Tobias J. Kippenberg

Abstract: Silicon nitride (Si$_3$N$_4$) photonic integrated circuits (PICs) have shown low linear loss, negligible nonlinear loss, and high power handling over traditional silicon photonics. To achieve high-density photonic integration and high effective nonlinearity through tight optical confinement, thick stoichiometric Si$_3$N$_4$ films are indispensable. However, when using low-pressure chemical vapor d… ▽ More Silicon nitride (Si$_3$N$_4$) photonic integrated circuits (PICs) have shown low linear loss, negligible nonlinear loss, and high power handling over traditional silicon photonics. To achieve high-density photonic integration and high effective nonlinearity through tight optical confinement, thick stoichiometric Si$_3$N$_4$ films are indispensable. However, when using low-pressure chemical vapor deposition (LPCVD) to achieve high optical material transparency, Si$_3$N$_4$ films exhibit large tensile stress on the order of GPa. Methods for crack prevention are therefore essential. The photonic Damascene process has addressed this issue, attaining record low loss Si$_3$N$_4$ PICs, but it lacks control of the waveguide height. Conversely, precise waveguide dimension and ultra-low loss have been achieved with subtractive processing, but this method is not compatible with mass production due to the use of electron beam lithography. To date, an outstanding challenge is to attain both lithographic precision and ultra-low loss in high confinement Si$_3$N$_4$ PICs that are compatible with large-scale foundry manufacturing. Here, we present a single-step deposited, DUV-based subtractive method for producing wafer-scale ultra-low loss Si$_3$N$_4$ PICs that harmonize these necessities. By employing deep etching of densely distributed, interconnected trenches into the substrate, we effectively mitigate the tensile stress in the Si$_3$N$_4$ layer, enabling direct deposition of thick films without cracking and substantially prolonged storage duration. Lastly, we identify ultraviolet (UV) radiation-induced damage that can be remedied through rapid thermal annealing. Collectively, we develop ultra-low loss Si$_3$N$_4$ microresonators and 0.5 m-long spiral waveguides with losses down to 1.4 dB/m at 1550 nm with high production yield. △ Less

Submitted 20 June, 2024; originally announced June 2024.

Comments: 2023 Conference on Lasers and Electro-Optics (CLEO). IEEE, 2023

An ultra-broadband photonic-chip-based traveling-wave parametric amplifier

Authors: Nikolai Kuznetsov, Alberto Nardi, Alisa Davydova, Mikhail Churaev, Johann Riemensberger, Paul Seidler, Tobias J. Kippenberg

Abstract: Optical amplification, crucial for modern communication, primarily relies on erbium-doped fiber amplifiers (EDFAs) to enhance signals without distortion. However, EDFAs only cover a portion of the low-loss spectrum of optical fibers. Optical parametric amplification, utilizing material nonlinearities, offers expanded capacity, but has faced limitations in gain and bandwidth. Addressing this, we pr… ▽ More Optical amplification, crucial for modern communication, primarily relies on erbium-doped fiber amplifiers (EDFAs) to enhance signals without distortion. However, EDFAs only cover a portion of the low-loss spectrum of optical fibers. Optical parametric amplification, utilizing material nonlinearities, offers expanded capacity, but has faced limitations in gain and bandwidth. Addressing this, we present a high-gain continuous-traveling-wave parametric amplifier, surpassing the erbium gain window. Leveraging low-loss gallium phosphide-on-insulator photonic integrated waveguides, we achieve up to 35 dB of parametric gain, with a fiber-to-fiber net gain exceeding 10 dB across a wide wavelength range of approximately 140 nm centered at 1550 nm. We demonstrate the capability to amplify ultra-weak signals, extending over 6 orders of magnitude of input powers, optical frequency combs, and communication signals, highlighting the practical potential of our photonic-chip-based amplifier. △ Less

Submitted 12 April, 2024; originally announced April 2024.

Comments: 17 pages, 11 figures

Fundamental charge noise in electro-optic photonic integrated circuits

Authors: Junyin Zhang, Zihan Li, Johann Riemensberger, Grigory Lihachev, Guanhao Huang, Tobias J. Kippenberg

Abstract: Understanding thermodynamical measurement noise is of central importance for electrical and optical precision measurements from mass-fabricated semiconductor sensors, where the Brownian motion of charge carriers poses limits, to optical reference cavities for atomic clocks or gravitational wave detection, which are limited by thermorefractive and thermoelastic noise due to the transduction of temp… ▽ More Understanding thermodynamical measurement noise is of central importance for electrical and optical precision measurements from mass-fabricated semiconductor sensors, where the Brownian motion of charge carriers poses limits, to optical reference cavities for atomic clocks or gravitational wave detection, which are limited by thermorefractive and thermoelastic noise due to the transduction of temperature fluctuations to the refractive index and length fluctuations. Here, we discover that unexpectedly charge carrier density fluctuations give rise to a novel noise process in recently emerged electro-optic photonic integrated circuits. We show that Lithium Niobate and Lithium Tantalate photonic integrated microresonators exhibit an unexpected Flicker type (i.e. $1/f^{1.2}$) scaling in their noise properties, significantly deviating from the well-established thermorefractive noise theory. We show that this noise is consistent with thermodynamical charge noise, which leads to electrical field fluctuations that are transduced via the strong Pockels effects of electro-optic materials. Our results establish electrical Johnson-Nyquist noise as the fundamental limitation for Pockels integrated photonics, crucial for determining performance limits for both classical and quantum devices, ranging from ultra-fast tunable and low-noise lasers, Pockels soliton microcombs, to quantum transduction, squeezed light or entangled photon-pair generation. Equally, this observation offers optical methods to probe mesoscopic charge fluctuations with exceptional precision. △ Less

Submitted 15 November, 2023; v1 submitted 29 August, 2023; originally announced August 2023.

Comments: Main Text: 8 pages, 4 figures; Supplementary Material: 15 pages, 13 figures --- version 2: Figure typo fixed (Homodyne setup); TCCR derivation in SI detailed

Voltage-tunable OPO with an alternating dispersion dimer integrated on chip

Authors: Dmitry Pidgayko, Aleksandr Tusnin, Johann Riemensberger, Anton Stroganov, Alexey Tikan, Tobias J. Kippenberg

Abstract: Optical parametric oscillators enable the conversion of pump light to new frequency bands using nonlinear optical processes. Recent advances in integrated nonlinear photonics have led to create compact, chip-scale sources via Kerr nonlinearity-induced parametric oscillations. While these sources have provided broadband wavelength tuning, the ability to tune the emission wavelength via dynamically… ▽ More Optical parametric oscillators enable the conversion of pump light to new frequency bands using nonlinear optical processes. Recent advances in integrated nonlinear photonics have led to create compact, chip-scale sources via Kerr nonlinearity-induced parametric oscillations. While these sources have provided broadband wavelength tuning, the ability to tune the emission wavelength via dynamically altering the dispersion, has not been attained so far. Here we present a voltage-tunable, on-chip integrated optical parametric oscillator based on alternating dispersiondimer, allowing to tune the emission over nearly 20 THz near 1550 nm. Unlike previous approaches, our device eliminates the need for a widely tunable pump laser source and provides efficient pump filtering at the drop port of the auxiliary ring. Integration of this scheme on a chip opens up the possibility of compact and low-cost voltage-tunable parametric oscillators with diverse application possibilities. △ Less

Submitted 8 August, 2023; v1 submitted 3 August, 2023; originally announced August 2023.

Lithium tantalate electro-optical photonic integrated circuits for high volume manufacturing

Authors: Chengli Wang, Zihan Li, Johann Riemensberger, Grigory Lihachev, Mikhail Churaev, Wil Kao, Xinru Ji, Terence Blesin, Alisa Davydova, Yang Chen, Xi Wang, Kai Huang, Xin Ou, Tobias J. Kippenberg

Abstract: Photonic integrated circuits based on Lithium Niobate have demonstrated the vast capabilities afforded by material with a high Pockels coefficient, allowing linear and high-speed modulators operating at CMOS voltage levels for applications ranging from data-center communications and photonic accelerators for AI. However despite major progress, the industrial adoption of this technology is compound… ▽ More Photonic integrated circuits based on Lithium Niobate have demonstrated the vast capabilities afforded by material with a high Pockels coefficient, allowing linear and high-speed modulators operating at CMOS voltage levels for applications ranging from data-center communications and photonic accelerators for AI. However despite major progress, the industrial adoption of this technology is compounded by the high cost per wafer. Here we overcome this challenge and demonstrate a photonic platform that satisfies the dichotomy of allowing scalable manufacturing at low cost, while at the same time exhibiting equal, and superior properties to those of Lithium Niobate. We demonstrate that it is possible to manufacture low loss photonic integrated circuits using Lithium Tantalate, a material that is already commercially adopted for acoustic filters in 5G and 6G. We show that LiTaO3 posses equally attractive optical properties and can be etched with high precision and negligible residues using DUV lithography, diamond like carbon (DLC) as a hard mask and alkaline wet etching. Using this approach we demonstrate microresonators with an intrinsic cavity linewidth of 26.8 MHz, corresponding to a linear loss of 5.6 dB/m and demonstrate a Mach Zehnder modulator with Vpi L = 4.2 V cm half-wave voltage length product. In comparison to Lithium Niobate, the photonic integrated circuits based on LiTaO3 exhibit a much lower birefringence, allowing high-density circuits and broadband operation over all telecommunication bands (O to L band), exhibit higher photorefractive damage threshold, and lower microwave loss tangent. Moreover, we show that the platform supports generation of soliton microcombs in X-Cut LiTaO3 racetrack microresonator with electronically detectable repetition rate, i.e. 30.1 GHz. △ Less

Submitted 11 July, 2023; v1 submitted 28 June, 2023; originally announced June 2023.

Comments: 8 pages, 4 figures

Hertz-linewidth and frequency-agile photonic integrated extended-DBR lasers

Authors: Anat Siddharth, Alaina Attanasio, Grigory Lihachev, Junyin Zhang, Zheru Qiu, Scott Kenning, Rui Ning Wang, Sunil A. Bhave, Johann Riemensberger, Tobias J. Kippenberg

Abstract: Recent advances in the development of ultra-low loss silicon nitride (Si3N4)-based photonic integrated circuits have allowed integrated lasers to achieve a coherence exceeding those of fiber lasers and enabled unprecedentedly fast (Megahertz bandwidth) tuning using monolithically integrated piezoelectrical actuators. While this marks the first time that fiber laser coherence is achieved using phot… ▽ More Recent advances in the development of ultra-low loss silicon nitride (Si3N4)-based photonic integrated circuits have allowed integrated lasers to achieve a coherence exceeding those of fiber lasers and enabled unprecedentedly fast (Megahertz bandwidth) tuning using monolithically integrated piezoelectrical actuators. While this marks the first time that fiber laser coherence is achieved using photonic integrated circuits, in conjunction with frequency agility that exceeds those of legacy bulk lasers, the approach is presently compounded by the high cost of manufacturing DFB, as required for self-injection locking, as well as the precise control over the laser current and temperature to sustain a low noise locked operation. Reflective semiconductor optical amplifiers (RSOA) provide a cost-effective alternative solution but have not yet achieved similar performance in coherence or frequency agility, as required for frequency modulated continuous wave (FMCW) LiDAR, laser locking in frequency metrology or wavelength modulation spectroscopy for gas sensing. Here, we overcome this challenge and demonstrate an RSOA-based and frequency agile integrated laser tuned with high speed, good linearity, high optical output power, and turn-key operability while maintaining a small footprint. This is achieved using a tunable extended distributed Bragg reflector (E-DBR) in an ultra-low loss 200 nm thin Si3N4 platform with monolithically integrated piezoelectric actuators. We co-integrate the DBR with a compact ultra-low loss spiral resonator to further reduce the intrinsic optical linewidth of the laser to the Hertz level -- on par with the noise of a fiber laser -- via self-injection locking. △ Less

Submitted 10 July, 2023; v1 submitted 5 June, 2023; originally announced June 2023.

Comments: 9 pages, 4 figures

A fully hybrid integrated Erbium-based laser

Authors: Yang Liu, Zheru Qiu, Xinru Ji, Andrea Bancora, Grigory Lihachev, Johann Riemensberger, Rui Ning Wang, Andrey Voloshin, Tobias J. Kippenberg

Abstract: Erbium-doped fiber lasers exhibit high coherence and low noise as required for applications in fiber optic sensing, gyroscopes, LiDAR, and optical frequency metrology. Endowing Erbium-based gain in photonic integrated circuits can provide a basis for miniaturizing low-noise fiber lasers to chip-scale form factor, and enable large-volume applications. Yet, while major progress has been made in the… ▽ More Erbium-doped fiber lasers exhibit high coherence and low noise as required for applications in fiber optic sensing, gyroscopes, LiDAR, and optical frequency metrology. Endowing Erbium-based gain in photonic integrated circuits can provide a basis for miniaturizing low-noise fiber lasers to chip-scale form factor, and enable large-volume applications. Yet, while major progress has been made in the last decade on integrated lasers based on silicon photonics with III-V gain media, the integration of Erbium lasers on chip has been compounded by large laser linewidth. Recent advances in photonic integrated circuit-based high-power Erbium-doped amplifiers, make a new class of rare-earth-ion-based lasers possible. Here, we demonstrate a fully integrated chip-scale Erbium laser that achieves high power, narrow linewidth, frequency agility, and the integration of a III-V pump laser. The laser circuit is based on an Erbium-implanted ultralow-loss silicon nitride Si$_3$N$4$ photonic integrated circuit. This device achieves single-mode lasing with a free-running intrinsic linewidth of 50 Hz, a relative intensity noise of $<$-150 dBc/Hz at $>$10 MHz offset, and output power up to 17 mW, approaching the performance of fiber lasers and state-of-the-art semiconductor extended cavity lasers. An intra-cavity microring-based Vernier filter enables wavelength tunability of $>$ 40 nm within the C- and L-bands while attaining side mode suppression ratio (SMSR) of $>$ 70 dB, surpassing legacy fiber lasers in tuning and SMRS performance. This new class of low-noise, tuneable Erbium waveguide laser could find applications in LiDAR, microwave photonics, optical frequency synthesis, and free-space communications. Our approach is extendable to other wavelengths, and more broadly, constitutes a novel way to photonic integrated circuit-based rare-earth-ion-doped lasers. △ Less

Submitted 5 May, 2023; originally announced May 2023.

Soliton Microcomb Generation in a III-V Photonic Crystal Cavity

Authors: Alberto Nardi, Alisa Davydova, Nikolai Kuznetsov, Miles H. Anderson, Charles Möhl, Johann Riemensberger, Paul Seidler, Tobias J. Kippenberg

Abstract: Photonic crystals, material structures in which the dielectric function varies periodically in one, two, or three dimensions, can provide exquisite control over the propagation and confinement of light. By tailoring their band structure, exceptional optical effects can be achieved, such as slow light propagation or, through the creation of photonic bandgaps, optical cavities with both a high quali… ▽ More Photonic crystals, material structures in which the dielectric function varies periodically in one, two, or three dimensions, can provide exquisite control over the propagation and confinement of light. By tailoring their band structure, exceptional optical effects can be achieved, such as slow light propagation or, through the creation of photonic bandgaps, optical cavities with both a high quality factor and a small mode volume. Photonic crystal cavities have been used to realize compact nano-lasers and achieve strong coupling to quantum emitters, such as semiconductor quantum dots, color centers, or cold atoms. A useful attribute of photonic crystals is the ability to create chirped mirrors. Chirping has underpinned advances in ultra-fast lasers based on bulk mirrors, but has yet to be fully exploited in integrated photonics, where it could provide a means to engineer otherwise unattainable dispersion profiles for a range of nonlinear optical applications, including soliton frequency comb generation. The vast majority of integrated resonators for frequency combs make use of microring geometries, where only waveguide width and height are varied to engineer dispersion. Generation of frequency combs has been demonstrated with one-dimensional photonic crystal cavities made of silicon nitride, but the low index contrast prevents formation of broad soliton combs. We overcome these challenges by using a photonic-crystal Fabry-Pérot resonator made of gallium phosphide, a material with a high refractive index and a Kerr nonlinearity 200 times larger than that of silicon nitride. We employ chirped photonic crystal mirrors to provide anomalous dispersion. With subharmonic pulsed pumping at an average power of 23.6 mW, we are able to access stable dissipative Kerr frequency combs. We demonstrate soliton formation with a 3-dB bandwidth of 3.0 THz, corresponding to a pulse duration of 60 fs. △ Less

Submitted 27 April, 2023; v1 submitted 25 April, 2023; originally announced April 2023.

Comments: 22 pages, 16 figures

Frequency agile photonic integrated external cavity laser

Authors: Grigory Lihachev, Andrea Bancora, Viacheslav Snigirev, Hao Tian, Johann Riemensberger, Vladimir Shadymov, Anat Siddharth, Alena Attanasio, Rui Ning Wang, Diego Visani, Andrey Voloshin, Sunil Bhave, Tobias J. Kippenberg

Abstract: Recent advances in the development of ultra-low loss silicon nitride integrated photonic circuits have heralded a new generation of integrated lasers capable of reaching fiber laser coherence. However, these devices presently are based on self-injection locking of distributed feedback (DFB) laser diodes, increasing both the cost and requiring tuning of laser setpoints for their operation. In contr… ▽ More Recent advances in the development of ultra-low loss silicon nitride integrated photonic circuits have heralded a new generation of integrated lasers capable of reaching fiber laser coherence. However, these devices presently are based on self-injection locking of distributed feedback (DFB) laser diodes, increasing both the cost and requiring tuning of laser setpoints for their operation. In contrast, turn-key legacy laser systems use reflective semiconductor optical amplifiers (RSOA). While this scheme has been utilized for integrated photonics-based lasers, so far, no cost-effective RSOA-based integrated lasers exist that are low noise and simultaneously feature fast, mode-hop-free and linear frequency tuning as required for frequency modulated continuous wave (FMCW) LiDAR or for laser locking in frequency metrology. Here we overcome this challenge and demonstrate a RSOA-based, frequency agile integrated laser, that can be tuned with high speed, with high linearity at low power. This is achieved using monolithic integration of piezoelectrical actuators on ultra-low loss silicon nitride photonic integrated circuits in a Vernier filter-based laser scheme. The laser operates at 1550 nm, features 6 mW output power, 400 Hz intrinsic laser linewidth, and allows ultrafast wavelength switching within 7 ns rise time and 75 nW power consumption. In addition, we demonstrate the suitability for FMCW LiDAR by showing laser frequency tuning over 1.5 GHz at 100 kHz triangular chirp rate with nonlinearity of 0.25% after linearization, and use the source for measuring a target scene 10 m away with a 8.5 cm distance resolution. △ Less

Submitted 20 March, 2023; v1 submitted 1 March, 2023; originally announced March 2023.

Chaotic microcomb inertia-free parallel ranging

Authors: Anton Lukashchuk, Johann Riemensberger, Anton Stroganov, Gabriele Navickaite, Tobias J. Kippenberg

Abstract: Ever growing pixel acquisition rates in the fields of augmented reality, autonomous driving and robotics have increased interest in solid state beam scanning without moving parts. Modern photonic integrated laser ranging advances towards passive beam steering solutions. Recently demonstrated imagers based on focal plane arrays, nanophotonic metasurfaces, and optical phased arrays enable unpreceden… ▽ More Ever growing pixel acquisition rates in the fields of augmented reality, autonomous driving and robotics have increased interest in solid state beam scanning without moving parts. Modern photonic integrated laser ranging advances towards passive beam steering solutions. Recently demonstrated imagers based on focal plane arrays, nanophotonic metasurfaces, and optical phased arrays enable unprecedented pixel resolution and measurement speed. However, parallelization of >100 lasers and detectors - successfully implemented in commercial time-of-flight sensors - has not been widely adopted for passive scanning approaches. Here, we show both inertia-free and parallel light detection and ranging (LiDAR) with microresonator frequency combs. We used 40 independent channels of a continuously scanned microresonator frequency comb operated in the chaotic regime in combination with optical dispersive elements to perform random modulation LiDAR with 2D passive beam steering. △ Less

Submitted 29 December, 2022; originally announced December 2022.

Tightly confining lithium niobate photonic integrated circuits and lasers

Authors: Zihan Li, Rui Ning Wang, Grigorii Lihachev, Zelin Tan, Viacheslav Snigirev, Mikhail Churaev, Nikolai Kuznetsov, Anat Siddharth, Mohammad J. Bereyhi, Johann Riemensberger, Tobias J. Kippenberg

Abstract: Photonic integrated circuits are indispensible for data transmission within modern datacenters and pervade into multiple application spheres traditionally limited for bulk optics, such as LiDAR and biosensing. Of particular interest are ferroelectrics such as Lithium Niobate, which exhibit a large electro-optical Pockels effect enabling ultrafast and efficient modulation, but are difficult to proc… ▽ More Photonic integrated circuits are indispensible for data transmission within modern datacenters and pervade into multiple application spheres traditionally limited for bulk optics, such as LiDAR and biosensing. Of particular interest are ferroelectrics such as Lithium Niobate, which exhibit a large electro-optical Pockels effect enabling ultrafast and efficient modulation, but are difficult to process via dry etching . For this reason, etching tightly confining waveguides - routinely achieved in silicon or silicon nitride - has not been possible. Diamond-like carbon (DLC) was discovered in the 1950s and is a material that exhibits an amorphous phase, excellent hardness, and the ability to be deposited in nano-metric thin films. It has excellent thermal, mechanical, and electrical properties, making it an ideal protective coating. Here we demonstrate that DLC is also a superior material for the manufacturing of next-generation photonic integrated circuits based on ferroelectrics, specifically Lithium Niobate on insulator (LNOI). Using DLC as a hard mask, we demonstrate the fabrication of deeply etched, tightly confining, low loss photonic integrated circuits with losses as low as 5.6 dB/m. In contrast to widely employed ridge waveguides, this approach benefits from a more than 1 order of magnitude higher area integration density while maintaining efficient electro-optical modulation, low loss, and offering a route for efficient optical fiber interfaces. As a proof of concept, we demonstrate a frequency agile hybrid integrated III-V Lithium Niobate based laser with kHz linewidth and tuning rate of 0.7 Peta-Hertz per second with excellent linearity and CMOS-compatible driving voltage. Our approach can herald a new generation of tightly confining ferroelectric photonic integrated circuits. △ Less

Submitted 10 August, 2022; originally announced August 2022.

Comments: 10 pages, 5 figures

Dissipative solitons and switching waves in dispersion folded Kerr cavities

Authors: Miles H. Anderson, Alexey Tikan, Aleksandr Tusnin, Johann Riemensberger, Rui Ning Wang, Tobias J. Kippenberg

Abstract: We theoretically and experimentally investigate the formation of dissipative coherent structures in Kerr nonlinear optical microresonators, whose integrated dispersion exceeds the free-spectral range. We demonstrate that the presence of any periodic modulation along the resonator's circumference, such as periodically varying dispersion, can excite higher-order comb structures. We explore the outco… ▽ More We theoretically and experimentally investigate the formation of dissipative coherent structures in Kerr nonlinear optical microresonators, whose integrated dispersion exceeds the free-spectral range. We demonstrate that the presence of any periodic modulation along the resonator's circumference, such as periodically varying dispersion, can excite higher-order comb structures. We explore the outcomes of coherent microcomb generation in both cases of anomalous and normal dispersion. We are able to access this regime in microresonators via the high peak power of synchronous pulse-driving. For solitons in anomalous dispersion, we observe the formation of higher-order phase-matched dispersive waves (`Kelly-like' sidebands), where the folded dispersion crosses the frequency comb grid. In normal dispersion, we see the coexistence of switching wave fronts with Faraday instability-induced period-doubling patterns, manifesting as powerful satellite microcombs highly separated either side of the core microcomb while sharing the same repetition rate. This regime of dispersion-modulated phase matching opens a dimension of Kerr cavity physics and microcomb generation, particularly for the spectral extension and tuneability of microcombs in normal dispersion. △ Less

Submitted 20 May, 2022; originally announced May 2022.

Comments: Supplementary information will be added to posting in coming days

A photonic integrated circuit based erbium-doped amplifier

Authors: Yang Liu, Zheru Qiu, Xinru Ji, Jijun He, Johann Riemensberger, Martin Hafermann, Rui Ning Wang, Junqiu Liu, Carsten Ronning, Tobias J. Kippenberg

Abstract: Erbium-doped fiber amplifiers have revolutionized long-haul optical communications and laser technology. Erbium ions could equally provide a basis for efficient optical amplification in photonic integrated circuits. However, this approach has thus far remained impractical due to insufficient output power. Here, we demonstrate a photonic integrated circuit based erbium amplifier reaching 145 mW out… ▽ More Erbium-doped fiber amplifiers have revolutionized long-haul optical communications and laser technology. Erbium ions could equally provide a basis for efficient optical amplification in photonic integrated circuits. However, this approach has thus far remained impractical due to insufficient output power. Here, we demonstrate a photonic integrated circuit based erbium amplifier reaching 145 mW output power and more than 30 dB small-signal gain -- on par with commercial fiber amplifiers and beyond state-of-the-art III-V heterogeneously integrated semiconductor amplifiers. We achieve this by applying ion implantation to recently emerged ultralow-loss Si3N4 photonic integrated circuits with meter-scale-length waveguides. We utilize the device to increase by 100-fold the output power of soliton microcombs, required for low-noise photonic microwave generation or as a source for wavelength-division multiplexed optical communications. Endowing Si3N4 photonic integrated circuits with gain enables the miniaturization of a wide range of fiber-based devices such as high-pulse-energy femtosecond mode-locked lasers. △ Less

Submitted 12 April, 2022; v1 submitted 5 April, 2022; originally announced April 2022.

Comments: 25 pages, 16 figures

Journal ref: Science, 376 (6599), 1309-1313 (2022)

Chaotic micro-comb based parallel ranging

Authors: Anton Lukashchuk, Johann Riemensberger, Aleksandr Tusnin, Junqiu Liu, Tobias Kippenberg

Abstract: The transition to chaos is ubiquitous in nonlinear systems ranging from fluid dynamics and superconducting circuits to biological organisms. Optical systems driven out of equilibrium such as lasers and supercontinuum generation exhibit chaotic states of light with fluctuations of both amplitude and phase and can give rise to Levy statistics, turbulence, and rogue waves. Spatio-temporal chaos also… ▽ More The transition to chaos is ubiquitous in nonlinear systems ranging from fluid dynamics and superconducting circuits to biological organisms. Optical systems driven out of equilibrium such as lasers and supercontinuum generation exhibit chaotic states of light with fluctuations of both amplitude and phase and can give rise to Levy statistics, turbulence, and rogue waves. Spatio-temporal chaos also occurs in continuous-wave driven photonic chip based Kerr micro-resonators, where it is referred to as chaotic modulation instability. Such modulation instability states have generally been considered impractical for applications, in contrast to their coherent light state counterparts, which include soliton or dark-pulse states. Here we demonstrate that incoherent and chaotic states of light in an optical microresonator can be harnessed to implement unambiguous and interference-immune massively parallel coherent laser ranging by using the intrinsic random amplitude and phase modulation of the chaotic comb lines. We utilize 40 distinct lines of a microresonator frequency comb operated in the modulation instability regime. Each line carries more than 1 GHz noise bandwidth, which greatly surpasses the cavity linewidth, and enables to retrieve the distance of objects with cm-scale resolution. Our approach utilizes one of the most widely accessible microcomb states, and offers -- in contrast to dissipative Kerr soliton states -- high conversion efficiency, as well as flat optical spectra, and alleviates the need for complex laser initiation routines. Moreover the approach generates wideband signal modulation without requiring any electro-optical modulator or microwave synthesizer. Viewed more broadly, similar optical systems capable of chaotic dynamics could be applied to random modulation optical ranging as well as spread spectrum communication and optical cryptography systems. △ Less

Submitted 19 December, 2021; originally announced December 2021.

Near ultraviolet photonic integrated lasers based on silicon nitride

Authors: Anat Siddharth, Thomas Wunderer, Grigory Lihachev, Andrey S. Voloshin, Camille Haller, Rui Ning Wang, Mark Teepe, Zhihong Yang, Junqiu Liu, Johann Riemensberger, Nicolas Grandjean, Noble Johnson, Tobias J. Kippenberg

Abstract: Low phase noise lasers based on the combination of III-V semiconductors and silicon photonics are well established in the near-infrared spectral regime. Recent advances in the development of low-loss silicon nitride-based photonic integrated resonators have allowed to outperform bulk external diode and fiber lasers in both phase noise and frequency agility in the 1550 nm-telecommunication window.… ▽ More Low phase noise lasers based on the combination of III-V semiconductors and silicon photonics are well established in the near-infrared spectral regime. Recent advances in the development of low-loss silicon nitride-based photonic integrated resonators have allowed to outperform bulk external diode and fiber lasers in both phase noise and frequency agility in the 1550 nm-telecommunication window. Here, we demonstrate for the first time a hybrid integrated laser composed of a gallium nitride (GaN) based laser diode and a silicon nitride photonic chip-based microresonator operating at record low wavelengths as low as 410 nm in the near-ultraviolet wavelength region suitable for addressing atomic transitions of atoms and ions used in atomic clocks, quantum computing, or for underwater LiDAR. Using self-injection locking to a high Q (0.4 $\times$ 10$^6$) photonic integrated microresonator we observe a phase noise reduction of the Fabry-Pérot laser at 461 nm by a factor greater than 100$\times$, limited by the device quality factor and back-reflection. △ Less

Submitted 29 March, 2022; v1 submitted 4 December, 2021; originally announced December 2021.

Comments: 10 pages, 8 figures

Ultrafast tunable lasers using lithium niobate integrated photonics

Authors: Viacheslav Snigirev, Annina Riedhauser, Grigory Lihachev, Johann Riemensberger, Rui Ning Wang, Charles Moehl, Mikhail Churaev, Anat Siddharth, Guanhao Huang, Youri Popoff, Ute Drechsler, Daniele Caimi, Simon Hoenl, Junqiu Liu, Paul Seidler, Tobias J. Kippenberg

Abstract: Recent advances in the processing of thin-film LNOI have enabled low-loss photonic integrated circuits, modulators with improved half-wave voltage, electro-optic frequency combs and novel on-chip electro-optic devices, with applications ranging from 5G telecommunication and microwave photonics to microwave-to-optical quantum interfaces. Lithium niobate integrated photonic circuits could equally be… ▽ More Recent advances in the processing of thin-film LNOI have enabled low-loss photonic integrated circuits, modulators with improved half-wave voltage, electro-optic frequency combs and novel on-chip electro-optic devices, with applications ranging from 5G telecommunication and microwave photonics to microwave-to-optical quantum interfaces. Lithium niobate integrated photonic circuits could equally be the basis of integrated narrow-linewidth frequency-agile lasers. Pioneering work on polished lithium niobate crystal resonators has led to the development of electrically tunable narrow-linewidth lasers. Here we report low-noise frequency-agile lasers based on lithium niobate integrated photonics and demonstrate their use for coherent laser ranging. This is achieved through heterogeneous integration of ultra-low-loss silicon nitride photonic circuits with thin-film lithium niobate via direct wafer bonding. This platform features low propagation loss of 8.5 dB/m enabling narrow-linewidth lasing (intrinsic linewidth of 3 kHz) by self-injection locking to a III-V semiconductor laser diode. The hybrid mode of the resonator allows electro-optical laser frequency tuning at a speed of 12 PHz/s with high linearity, low hysteresis and while retaining narrow linewidth. Using this hybrid integrated laser, we perform a proof-of-concept FMCW LiDAR ranging experiment, with a resolution of 15 cm. By fully leveraging the high electro-optic coefficient of lithium niobate, with further improvements in photonic integrated circuits design, these devices can operate with CMOS-compatible voltages, or achieve mm-scale distance resolution. Endowing low loss silicon nitride integrated photonics with lithium niobate, gives a platform with wide transparency window, that can be used to realize ultrafast tunable lasers from the visible to the mid-infrared, with applications from OCT and LiDAR to environmental sensing. △ Less

Submitted 11 August, 2022; v1 submitted 3 December, 2021; originally announced December 2021.

Comments: Funding information corrections (2nd turn)

A heterogeneously integrated lithium niobate-on-silicon nitride photonic platform

Authors: Mikhail Churaev, Rui Ning Wang, Viacheslav Snigirev, Annina Riedhauser, Terence Blésin, Charles Möhl, Miles A. Anderson, Anat Siddharth, Youri Popoff, Daniele Caimi, Simon Hönl, Johann Riemensberger, Junqiu Liu, Paul Seidler, Tobias J. Kippenberg

Abstract: The availability of thin-film lithium niobate on insulator (LNOI) and advances in processing have led to the emergence of fully integrated LiNbO3 electro-optic devices, including low-voltage, high-speed modulators, electro-optic frequency combs, and microwave-optical transducers. Yet to date, LiNbO3 photonic integrated circuits (PICs) have mostly been fabricated using non-standard etching techniqu… ▽ More The availability of thin-film lithium niobate on insulator (LNOI) and advances in processing have led to the emergence of fully integrated LiNbO3 electro-optic devices, including low-voltage, high-speed modulators, electro-optic frequency combs, and microwave-optical transducers. Yet to date, LiNbO3 photonic integrated circuits (PICs) have mostly been fabricated using non-standard etching techniques that lack the reproducibility routinely achieved in silicon photonics. Widespread future application of thin-film LiNbO3 requires a reliable and scalable solution using standard processing and precise lithographic control. Here we demonstrate a heterogeneously integrated LiNbO3 photonic platform that overcomes the abovementioned challenges by employing wafer-scale bonding of thin-film LiNbO3 to planarized low-loss silicon nitride (Si3N4) photonic integrated circuits, a mature foundry-grade integrated photonic platform. The resulting devices combine the substantial Pockels effect of LiNbO3 with the scalability, high-yield, and complexity of the underlying Si3N4 PICs. Importantly, the platform maintains the low propagation loss (<0.1 dB/cm) and efficient fiber-to-chip coupling (<2.5 dB per facet) of the Si3N4 waveguides. We find that ten transitions between a mode confined in the Si3N4 PIC and the hybrid LiNbO$_3$ mode produce less than 0.8 dB additional loss, corresponding to a loss per transition not exceeding 0.1 dB. These nearly lossless adiabatic transitions thus link the low-loss passive Si3N4 photonic structures with electro-optic components. We demonstrate high-Q microresonators, optical splitters, electrically tunable photonic dimers, electro-optic frequency combs, and carrier-envelope phase detection of a femtosecond laser on the same platform, thus providing a reliable and foundry-ready solution to low-loss and complex LiNbO3 integrated photonic circuits. △ Less

Submitted 12 September, 2022; v1 submitted 3 December, 2021; originally announced December 2021.

Compact, spatial-mode-interaction-free, ultralow-loss, nonlinear photonic integrated circuits

Authors: Xinru Ji, Junqiu Liu, Jijun He, Rui Ning Wang, Zheru Qiu, Johann Riemensberger, Tobias J. Kippenberg

Abstract: Nonlinear photonics based on integrated circuits has enabled applications such as parametric amplifiers, soliton frequency combs, supercontinua, and non-reciprocal devices. Ultralow optical loss and the capability for dispersion engineering are essential, which necessitate the use of multi-mode waveguides. Despite that rich interaction among different spatial waveguide eigenmodes can give rise to… ▽ More Nonlinear photonics based on integrated circuits has enabled applications such as parametric amplifiers, soliton frequency combs, supercontinua, and non-reciprocal devices. Ultralow optical loss and the capability for dispersion engineering are essential, which necessitate the use of multi-mode waveguides. Despite that rich interaction among different spatial waveguide eigenmodes can give rise to novel nonlinear phenomena, spatial mode interaction is typically undesired as it increases optical loss, perturbs local dispersion profile, and impedes soliton formation. Adiabatic bends, such as Euler bends whose curvature varies linearly with their path length, have been favoured to suppress spatial mode interaction. Adiabatic bends can essentially connect any two waveguide segments with adiabatic mode conversion, thus efficiently avoid mode mixing due to mode mismatch. However, previous works lack quantitative measurement data and analysis to fairly evaluate the adiabaticity, and are not based on photonic integrated circuits with tight optical confinement and optical losses of few dB/m. Here, we adapt, optimize, and implement Euler bends to build compact racetrack microresonators based on ultralow-loss, multi-mode, silicon nitride photonic integrated circuits. The racetrack microresonators feature a small footprint of only 0.21 mm^2 for 19.8 GHz FSR. We quantitatively investigate the suppression of spatial mode interaction in the racetrack microresonators with Euler bends. We show that the optical loss rate (15.5 MHz) is preserved, on par with the mode interaction strength (25 MHz). This results in an unperturbed microresonator dispersion profile. We further demonstrate single soliton of 19.8 GHz repetition rate. The optimized Euler bends and racetrack microresonators can be key building blocks for integrated nonlinear photonic systems, programmable processors and photonic quantum computing. △ Less

Submitted 14 September, 2021; originally announced September 2021.

Photonic chip-based continuous-travelling-wave parametric amplifier

Authors: Johann Riemensberger, Junqiu Liu, Nikolai Kuznetsov, Jijun He, Rui Ning Wang, Tobias J. Kippenberg

Abstract: The ability to amplify optical signals is of pivotal importance across science and technology. The development of optical amplifiers has revolutionized optical communications, which are today pervasively used in virtually all sensing and communication applications of coherent laser sources. In the telecommunication bands, optical amplifiers typically utilize gain media based on III-V semiconductor… ▽ More The ability to amplify optical signals is of pivotal importance across science and technology. The development of optical amplifiers has revolutionized optical communications, which are today pervasively used in virtually all sensing and communication applications of coherent laser sources. In the telecommunication bands, optical amplifiers typically utilize gain media based on III-V semiconductors or rare-earth-doped fibers. Another way to amplify optical signals is to utilize the Kerr nonlinearity of optical fibers or waveguides via parametric processes. Such parametric amplifiers of travelling continuous wave have been originally developed in the microwave domain, and enable quantum-limited signal amplification with high peak gain, broadband gain spectrum tailored via dispersion control, and ability to enable phase sensitive amplification. Despite these advantages, optical amplifiers based on parametric gain have proven impractical in silica fibers due to the low Kerr nonlinearity. Recent advances in photonic integrated circuits have revived interest in parametric amplifiers due to the significantly increased nonlinearity in various integrated platforms. Yet, despite major progress, continuous-wave-pumped parametric amplifiers built on photonic chips have to date remained out of reach. Here we demonstrate a chip-based travelling-wave optical parametric amplifier with net signal gain in the continuous-wave regime. Using ultralow-loss, dispersion-engineered, meter-long, silicon nitride photonic integrated circuits that are tightly coiled on a photonic chip, we achieve a continuous parametric gain of 12 dB that exceeds both the on-chip optical propagation loss and fiber-chip-fiber coupling losses in the optical C-band. △ Less

Submitted 20 July, 2021; originally announced July 2021.

Roadmap on multimode light shaping

Authors: Marco Piccardo, Vincent Ginis, Andrew Forbes, Simon Mahler, Asher A. Friesem, Nir Davidson, Haoran Ren, Ahmed H. Dorrah, Federico Capasso, Firehun T. Dullo, Balpreet S. Ahluwalia, Antonio Ambrosio, Sylvain Gigan, Nicolas Treps, Markus Hiekkamäki, Robert Fickler, Michael Kues, David Moss, Roberto Morandotti, Johann Riemensberger, Tobias J. Kippenberg, Jérôme Faist, Giacomo Scalari, Nathalie Picqué, Theodor W. Hänsch , et al. (13 additional authors not shown)

Abstract: Our ability to generate new distributions of light has been remarkably enhanced in recent years. At the most fundamental level, these light patterns are obtained by ingeniously combining different electromagnetic modes. Interestingly, the modal superposition occurs in the spatial, temporal as well as spatio-temporal domain. This generalized concept of structured light is being applied across the e… ▽ More Our ability to generate new distributions of light has been remarkably enhanced in recent years. At the most fundamental level, these light patterns are obtained by ingeniously combining different electromagnetic modes. Interestingly, the modal superposition occurs in the spatial, temporal as well as spatio-temporal domain. This generalized concept of structured light is being applied across the entire spectrum of optics: generating classical and quantum states of light, harnessing linear and nonlinear light-matter interactions, and advancing applications in microscopy, spectroscopy, holography, communication, and synchronization. This Roadmap highlights the common roots of these different techniques and thus establishes links between research areas that complement each other seamlessly. We provide an overview of all these areas, their backgrounds, current research, and future developments. We highlight the power of multimodal light manipulation and want to inspire new eclectic approaches in this vibrant research community. △ Less

Submitted 8 April, 2021; originally announced April 2021.

Comments: Under review in J. Opt

Ultralow-noise frequency-agile photonic integrated lasers

Authors: Grigory Lihachev, Johann Riemensberger, Wenle Weng, Junqiu Liu, Hao Tian, Anat Siddharth, Viacheslav Snigirev, Rui Ning Wang, Jijun He, Sunil A. Bhave, Tobias J. Kippenberg

Abstract: Low-noise lasers are of central importance in a wide variety of applications, including high spectral-efficiency coherent communication protocols, distributed fibre sensing, and long distance coherent LiDAR. In addition to low phase noise, frequency agility, that is, the ability to achieve high-bandwidth actuation of the laser frequency, is imperative for triangular chirping in frequency-modulated… ▽ More Low-noise lasers are of central importance in a wide variety of applications, including high spectral-efficiency coherent communication protocols, distributed fibre sensing, and long distance coherent LiDAR. In addition to low phase noise, frequency agility, that is, the ability to achieve high-bandwidth actuation of the laser frequency, is imperative for triangular chirping in frequency-modulated continuous-wave (FMCW) based ranging or any optical phase locking as routinely used in metrology. While integrated silicon-based lasers have experienced major advances and are now employed on a commercial scale in data centers, integrated lasers with sub-100 Hz-level intrinsic linewidth are based on optical feedback from photonic circuits that lack frequency agility. Here, we demonstrate a wafer-scale-manufacturing-compatible hybrid photonic integrated laser that exhibits ultralow intrinsic linewidth of 25 Hz while offering unsurpassed megahertz actuation bandwidth, with a tuning range larger than 1 GHz. Our approach uses ultralow-loss (1 dB/m) Si$_3$N$_4$ photonic microresonators, combined with aluminium nitride (AlN) or lead zirconium titanate (PZT) microelectromechanical systems (MEMS) based stress-optic actuation. Electrically driven low-phase noise lasing is attained by self-injection locking of an Indium Phosphide (InP) laser chip and only limited by fundamental thermo-refractive noise. By utilizing difference drive and apodization of the photonic chip, a flat actuation response up to 10 MHz is achieved. We leverage this capability to demonstrate a compact coherent LiDAR engine that can generate up to 800 kHz FMCW triangular optical chirp signals, requiring neither any active linearization nor predistortion compensation, and perform a 10 m optical ranging experiment, with a resolution of 12.5 cm. △ Less

Submitted 15 July, 2021; v1 submitted 7 April, 2021; originally announced April 2021.

Laser soliton microcombs on silicon

Authors: Chao Xiang, Junqiu Liu, Joel Guo, Lin Chang, Rui Ning Wang, Wenle Weng, Jonathan Peters, Weiqiang Xie, Zeyu Zhang, Johann Riemensberger, Jennifer Selvidge, Tobias J. Kippenberg, John E. Bowers

Abstract: Silicon photonics enables wafer-scale integration of optical functionalities on chip. A silicon-based laser frequency combs could significantly expand the applications of silicon photonics, by providing integrated sources of mutually coherent laser lines for terabit-per-second transceivers, parallel coherent LiDAR, or photonics-assisted signal processing. Here, we report on heterogeneously integra… ▽ More Silicon photonics enables wafer-scale integration of optical functionalities on chip. A silicon-based laser frequency combs could significantly expand the applications of silicon photonics, by providing integrated sources of mutually coherent laser lines for terabit-per-second transceivers, parallel coherent LiDAR, or photonics-assisted signal processing. Here, we report on heterogeneously integrated laser soliton microcombs combining both InP/Si semiconductor lasers and ultralow-loss silicon nitride microresonators on monolithic silicon substrate. Thousands of devices are produced from a single wafer using standard CMOS techniques. Using on-chip electrical control of the microcomb-laser relative optical phase, these devices can output single-soliton microcombs with 100 GHz repetition rate. Our approach paves the way for large-volume, low-cost manufacturing of chip-based frequency combs for next-generation high-capacity transceivers, datacenters, space and mobile platforms. △ Less

Submitted 3 March, 2021; originally announced March 2021.

Dissipative Kerr solitons in a photonic dimer on both sides of exceptional point

Authors: Kenichi Komagata, Alexey Tikan, Aleksandr Tusnin, Johann Riemensberger, Mikhail Churaev, Hairun Guo, Tobias J. Kippenberg

Abstract: Exceptional points are a ubiquitous concept widely present in driven-dissipative coupled systems described by a non-Hermitian Hamiltonian. It is characterized by the degeneracy of the Hamiltonian's eigenvalues and coalescence of corresponding eigenvectors. Recent developments demonstrated that exceptional points can play an important role in photonics. However, to date, exceptional points have bee… ▽ More Exceptional points are a ubiquitous concept widely present in driven-dissipative coupled systems described by a non-Hermitian Hamiltonian. It is characterized by the degeneracy of the Hamiltonian's eigenvalues and coalescence of corresponding eigenvectors. Recent developments demonstrated that exceptional points can play an important role in photonics. However, to date, exceptional points have been extensively examined in the systems supporting only a few optical modes, thereby leaving the observation of collective (multimode) effects outside of the scope of study. In the present paper, we analyze the role of exceptional points in nonlinear multimode photonics. Specifically, we provide insights into complex nonlinear dynamics arising in a continuous wave-driven pair of strongly coupled nonlinear micro-resonators (i.e. a nonlinear photonic dimer) operating in the multimode regime. Investigating this system, which is known to possess exceptional points, we find two fundamentally different nonlinear regimes of operation corresponding to effective parity-time symmetric and broken parity-time symmetry states. We demonstrate that the photonic dimer can be critically coupled to a bus waveguide, thereby, providing an efficient generation of the dissipative Kerr solitons on both sides of the exceptional point. The parity-time symmetric case, which corresponds to a pair of symmetrically split resonances, has been recently shown to exhibit a variety of emergent phenomena including gear soliton generation, symmetry breaking, and soliton hopping. Dissipative solitons generation in the parity-time symmetry broken case - leading to the dissipation splitting - up to now remains unexplored. △ Less

Submitted 22 January, 2021; originally announced January 2021.

Comments: 19 pages, 10 figures

Dual chirped micro-comb based parallel ranging at megapixel-line rates

Authors: Anton Lukashchuk, Johann Riemensberger, Maxim Karpov, Junqiu Liu, Tobias J. Kippenberg

Abstract: Laser based ranging (LiDAR) - already ubiquitously used in industrial monitoring, atmospheric dynamics, or geodesy - is key sensor technology. Coherent laser ranging, in contrast to time-of-flight approaches, is immune to ambient light, operates continuous wave allowing higher average powers, and yields simultaneous velocity and distance information. State-of-the-art coherent single laser-detector… ▽ More Laser based ranging (LiDAR) - already ubiquitously used in industrial monitoring, atmospheric dynamics, or geodesy - is key sensor technology. Coherent laser ranging, in contrast to time-of-flight approaches, is immune to ambient light, operates continuous wave allowing higher average powers, and yields simultaneous velocity and distance information. State-of-the-art coherent single laser-detector architectures reach hundreds of kilopixel per second rates. While emerging applications such as autonomous driving, robotics, and augmented reality mandate megapixel per second point sampling to support real-time video-rate imaging. Yet, such rates of coherent LiDAR have not been demonstrated. Here we report a swept dual-soliton microcomb technique enabling coherent ranging and velocimetry at megapixel per second line scan measurement rates with up to 64 spectrally dispersed optical channels. It is based on recent advances in photonic chip-based microcombs that offer a solution to reduce complexity both on the transmitter and receiver sides. Multi-heterodyning two synchronously frequency-modulated microcombs yields distance and velocity information of all individual ranging channels on a single receiver alleviating the need for individual separation, detection, and digitization. The reported LiDAR implementation is hardware-efficient, compatible with photonic integration, and demonstrates the significant advantages of acquisition speed afforded by the convergence of optical telecommunication and metrology technologies. We anticipate our research will motivate further investigation of frequency swept microresonator dual-comb approach in the neighboring fields of linear and nonlinear spectroscopy, optical coherence tomography. △ Less

Submitted 10 October, 2021; v1 submitted 11 January, 2021; originally announced January 2021.

Protected generation of dissipative Kerr solitons in supermodes of coupled optical microresonators

Authors: Alexey Tikan, Aleksandr Tusnin, Johann Riemensberger, Mikhail Churaev, Kenichi Komagata, Xinru Ji, Rui Ning Wang, Junqiu Liu, Tobias J. Kippenberg

Abstract: The driven-dissipative photonic dimer comprised of two evanescently coupled high-Q microresonators is a fundamental element of multimode soliton lattices. It has demonstrated a variety of emergent nonlinear phenomena including supermode soliton generation, symmetry breaking, and soliton hopping. In this article, we present another aspect of dissipative soliton generation in coupled resonators, rev… ▽ More The driven-dissipative photonic dimer comprised of two evanescently coupled high-Q microresonators is a fundamental element of multimode soliton lattices. It has demonstrated a variety of emergent nonlinear phenomena including supermode soliton generation, symmetry breaking, and soliton hopping. In this article, we present another aspect of dissipative soliton generation in coupled resonators, revealing the advantages of this system over conventional single resonator platforms. Namely, we show that the accessibility of solitons drastically varies for symmetric and antisymmetric supermode families of the dimer. Linear measurements reveal that the coupling between transverse modes, which gives rise to avoided mode crossings, can be almost completely suppressed. We explain the origin of this phenomenon and show its crucial influence on the dissipative Kerr soliton formation process in lattices of coupled high-Q resonators of any type. Choosing a particular example of the topological Su-Schrieffer-Heeger model, we demonstrate how the edge state can be protected from the interaction with higher-order modes, allowing for the formation of topological Kerr solitons. △ Less

Submitted 16 August, 2022; v1 submitted 16 November, 2020; originally announced November 2020.

Emergent Nonlinear Phenomena in a Driven Dissipative Photonic Dimer

Authors: Alexey Tikan, Johann Riemensberger, Kenichi Komagata, Simon Hönl, Mikhail Churaev, Connor Skehan, Hairun Guo, Rui Ning Wang, Junqiu Liu, Paul Seidler, Tobias J. Kippenberg

Abstract: Emergent phenomena are ubiquitous in nature and refer to spatial, temporal, or spatiotemporal pattern formation in complex nonlinear systems driven out of equilibrium that is not contained in the microscopic descriptions at the single-particle level. Examples range from novel phases of matter in both quantum and classical many-body systems, to galaxy formation or neural dynamics. Two characteristi… ▽ More Emergent phenomena are ubiquitous in nature and refer to spatial, temporal, or spatiotemporal pattern formation in complex nonlinear systems driven out of equilibrium that is not contained in the microscopic descriptions at the single-particle level. Examples range from novel phases of matter in both quantum and classical many-body systems, to galaxy formation or neural dynamics. Two characteristic phenomena are length scales that exceed the characteristic interaction length and spontaneous symmetry breaking. Recent advances in integrated photonics indicate that the study of emergent phenomena is possible in complex coupled nonlinear optical systems. Here we demonstrate that out-of-equilibrium driving of a strongly coupled ("dimer") pair of photonic integrated Kerr microresonators, which at the "single-particle" (i.e. individual resonator) level generate well understood dissipative Kerr solitons, exhibit emergent nonlinear phenomena. By exploring the dimer phase diagram, we find unexpected and therefore unpredicted regimes of soliton hopping, spontaneous symmetry breaking, and periodically emerging (in)commensurate dispersive waves. These phenomena are not included in the single-particle description and related to the parametric frequency conversion between hybridized supermodes. Moreover, by controlling supermode hybridization electrically, we achieve wide tunability of spectral interference patterns between dimer solitons and dispersive waves. Our findings provide the first critical step towards the study of emergent nonlinear phenomena in soliton networks and multimode lattices. △ Less

Submitted 23 May, 2020; v1 submitted 13 May, 2020; originally announced May 2020.

Comments: 19 pages, 12 figures

Massively parallel coherent laser ranging using soliton microcombs

Authors: Johann Riemensberger, Anton Lukashchuk, Maxim Karpov, Wenle Weng, Erwan Lucas, Junqiu Liu, Tobias J. Kippenberg

Abstract: Coherent ranging, also known as frequency-modulated continuous-wave (FMCW) laser based ranging (LIDAR) is currently developed for long range 3D distance and velocimetry in autonomous driving. Its principle is based on mapping distance to frequency, and to simultaneously measure the Doppler shift of reflected light using frequency chirped signals, similar to Sonar or Radar. Yet, despite these advan… ▽ More Coherent ranging, also known as frequency-modulated continuous-wave (FMCW) laser based ranging (LIDAR) is currently developed for long range 3D distance and velocimetry in autonomous driving. Its principle is based on mapping distance to frequency, and to simultaneously measure the Doppler shift of reflected light using frequency chirped signals, similar to Sonar or Radar. Yet, despite these advantages, coherent ranging exhibits lower acquisition speed and requires precisely chirped and highly-coherent laser sources, hindering their widespread use and impeding Parallelization, compared to modern time-of-flight (TOF) ranging that use arrays of individual lasers. Here we demonstrate a novel massively parallel coherent LIDAR scheme using a photonic chip-based microcomb. By fast chirping the pump laser in the soliton existence range of a microcomb with amplitudes up to several GHz and sweep rate up to 10 MHz, the soliton pulse stream acquires a rapid change in the underlying carrier waveform, while retaining its pulse-to-pulse repetition rate. As a result, the chirp from a single narrow-linewidth pump laser is simultaneously transferred to all spectral comb teeth of the soliton at once, and allows for true parallelism in FMCW LIDAR. We demonstrate this approach by generating 30 distinct channels, demonstrating both parallel distance and velocity measurements at an equivalent rate of 3 Mpixel/s, with potential to improve sampling rates beyond 150 Mpixel/s and increase the image refresh rate of FMCW LIDAR up to two orders of magnitude without deterioration of eye safety. The present approach, when combined with photonic phase arrays based on nanophotonic gratings, provides a technological basis for compact, massively parallel and ultra-high frame rate coherent LIDAR systems. △ Less

Submitted 24 December, 2019; originally announced December 2019.

Comments: 18 pages, 12 Figures

Journal ref: Nature 581, 164-170 (2020)

Soliton microcomb based spectral domain optical coherence tomography

Authors: Paul J. Marchand, J. Connor Skehan, Johann Riemensberger, Jia-Jung Ho, Martin H. P. Pfeiffer, Junqiu Liu, Christoph Hauger, Theo Lasser, Tobias J. Kippenberg

Abstract: Spectral domain optical coherence tomography (SD-OCT) is a widely used and minimally invaive technique for bio-medical imaging [1]. SD-OCT typically relies on the use of superluminescent diodes (SLD), which provide a low-noise and broadband optical spectrum. Recent advances in photonic chipscale frequency combs [2, 3] based on soliton formation in photonic integrated microresonators provide an chi… ▽ More Spectral domain optical coherence tomography (SD-OCT) is a widely used and minimally invaive technique for bio-medical imaging [1]. SD-OCT typically relies on the use of superluminescent diodes (SLD), which provide a low-noise and broadband optical spectrum. Recent advances in photonic chipscale frequency combs [2, 3] based on soliton formation in photonic integrated microresonators provide an chipscale alternative illumination scheme for SD-OCT. Yet to date, the use of such soliton microcombs in OCT has not yet been analyzed. Here we explore the use of soliton microcombs in spectral domain OCT and show that, by using photonic chipscale Si3N4 resonators in conjunction with 1300 nm pump lasers, spectral bandwidths exceeding those of commercial SLDs are possible. We demonstrate that the soliton states in microresonators exhibit a noise floor that is ca. 3 dB lower than for the SLD at identical power, but can exhibit significantly lower noise performance for powers at the milliWatt level. We perform SD-OCT imaging on an ex vivo fixed mouse brain tissue using the soliton microcomb, alongside an SLD for comparison, and demonstrate the principle viability of soliton based SD-OCT. Importantly, we demonstrate that classical amplitude noise of all soliton comb teeth are correlated, i.e. common mode, in contrast to SLD or incoherent microcomb states [4], which should, in theory, improve the image quality. Moreover, we demonstrate the potential for circular ranging, i.e. optical sub-sampling [5, 6], due to the high coherence and temporal periodicity of the soliton state. Taken together, our work indicates the promising properties of soliton microcombs for SD-OCT. △ Less

Submitted 19 March, 2020; v1 submitted 19 February, 2019; originally announced February 2019.

Nanophotonic soliton-based microwave synthesizers

Authors: Junqiu Liu, Erwan Lucas, Arslan S. Raja, Jijun He, Johann Riemensberger, Rui Ning Wang, Maxim Karpov, Hairun Guo, Romain Bouchand, Tobias J. Kippenberg

Abstract: Microwave photonic technologies, which upshift the carrier into the optical domain to facilitate the generation and processing of ultrawide-band electronic signals at vastly reduced fractional bandwidths, have the potential to achieve superior performance compared to conventional electronics for targeted functions. For microwave photonic applications such as filters, coherent radars, subnoise dete… ▽ More Microwave photonic technologies, which upshift the carrier into the optical domain to facilitate the generation and processing of ultrawide-band electronic signals at vastly reduced fractional bandwidths, have the potential to achieve superior performance compared to conventional electronics for targeted functions. For microwave photonic applications such as filters, coherent radars, subnoise detection, optical communications and low-noise microwave generation, frequency combs are key building blocks. By virtue of soliton microcombs, frequency combs can now be built using CMOS compatible photonic integrated circuits, operated with low power and noise, and have already been employed in system-level demonstrations. Yet, currently developed photonic integrated microcombs all operate with repetition rates significantly beyond those that conventional electronics can detect and process, compounding their use in microwave photonics. Here we demonstrate integrated soliton microcombs operating in two widely employed microwave bands, X- and K-band. These devices can produce more than 300 comb lines within the 3-dB-bandwidth, and generate microwave signals featuring phase noise levels below 105 dBc/Hz (140 dBc/Hz) at 10 kHz (1 MHz) offset frequency, comparable to modern electronic microwave synthesizers. In addition, the soliton pulse stream can be injection-locked to a microwave signal, enabling actuator-free repetition rate stabilization, tuning and microwave spectral purification, at power levels compatible with silicon-based lasers (<150 mW). Our results establish photonic integrated soliton microcombs as viable integrated low-noise microwave synthesizers. Further, the low repetition rates are critical for future dense WDM channel generation schemes, and can significantly reduce the system complexity of photonic integrated frequency synthesizers and atomic clocks. △ Less

Submitted 25 November, 2019; v1 submitted 29 January, 2019; originally announced January 2019.

Dispersion engineered high-Q silicon Nitride Ring-Resonators via Atomic Layer Deposition

Authors: Johann Riemensberger, Klaus Hartinger, Tobias Herr, Victor Brasch, Ronald Holzwarth, Tobias J. Kippenberg

Abstract: We demonstrate dispersion engineering of integrated silicon nitride based ring resonators through conformal coating with hafnium dioxide deposited on top of the structures via atomic layer deposition (ALD). Both, magnitude and bandwidth of anomalous dispersion can be significantly increased. All results are confirmed by high resolution frequency-comb-assisted-diode-laser spectroscopy and are in ve… ▽ More We demonstrate dispersion engineering of integrated silicon nitride based ring resonators through conformal coating with hafnium dioxide deposited on top of the structures via atomic layer deposition (ALD). Both, magnitude and bandwidth of anomalous dispersion can be significantly increased. All results are confirmed by high resolution frequency-comb-assisted-diode-laser spectroscopy and are in very good agreement with the simulated modification of the mode spectrum. △ Less

Submitted 16 July, 2012; originally announced July 2012.

Comments: 4 pages, 4 figures

Journal ref: Optics Express Vol. 20, Issue 25, pp. 27661-27669 (2012)

Universal Dynamics of Kerr Frequency Comb Formation in Microresonators

Authors: T. Herr, J. Riemensberger, C. Wang, K. Hartinger, E. Gavartin, R. Holzwarth, M. L. Gorodetsky, T. J. Kippenberg

Abstract: Optical frequency combs allow for precise measurement of optical frequencies and are used in a growing number of applications beyond spectroscopy and optical frequency metrology. A class of compact microresonator based frequency comb generators has emerged recently based on (hyper)-parametric frequency conversion, mediated by the Kerr-non-linearity, of a continuous wave laser beam. Despite the rap… ▽ More Optical frequency combs allow for precise measurement of optical frequencies and are used in a growing number of applications beyond spectroscopy and optical frequency metrology. A class of compact microresonator based frequency comb generators has emerged recently based on (hyper)-parametric frequency conversion, mediated by the Kerr-non-linearity, of a continuous wave laser beam. Despite the rapid progress and the emergence of a wide variety of micro-resonator Kerr-comb platforms, an understanding of the dynamics of the Kerr comb formation is still lacking. In particular the question in which regime low phase noise performance can be achieved has so far not been answered but is of critical importance for future application of this technology. Here an universal, platform independent understanding of the Kerr-comb formation dynamics based on experimental observations in crystalline MgF2 and planar Si3N4 comb generators is given. This explains a wide range of hereto not understood phenomena and reveals for the first time the underlying condition for low phase noise performance. △ Less

Submitted 13 November, 2011; originally announced November 2011.

Journal ref: Nature Photonics 6, 480-487 (2012)