-
Integrated Mode-Hop-Free Tunable Lasers at 780 nm for Chip-Scale Classical and Quantum Photonic Applications
Authors:
Joshua E. Castro,
Eber Nolasco-Martinez,
Paolo Pintus,
Zeyu Zhang,
Boqiang Shen,
Theodore Morin,
Lillian Thiel,
Trevor J. Steiner,
Nicholas Lewis,
Sahil D. Patel,
John E. Bowers,
David M. Weld,
Galan Moody
Abstract:
In the last decade, remarkable advances in integrated photonic technologies have enabled table-top experiments and instrumentation to be scaled down to compact chips with significant reduction in size, weight, power consumption, and cost. Here, we demonstrate an integrated continuously tunable laser in a heterogeneous gallium arsenide-on-silicon nitride (GaAs-on-SiN) platform that emits in the far…
▽ More
In the last decade, remarkable advances in integrated photonic technologies have enabled table-top experiments and instrumentation to be scaled down to compact chips with significant reduction in size, weight, power consumption, and cost. Here, we demonstrate an integrated continuously tunable laser in a heterogeneous gallium arsenide-on-silicon nitride (GaAs-on-SiN) platform that emits in the far-red radiation spectrum near 780 nm, with 20 nm tuning range, <6 kHz intrinsic linewidth, and a >40 dB side-mode suppression ratio. The GaAs optical gain regions are heterogeneously integrated with low-loss SiN waveguides. The narrow linewidth lasing is achieved with an extended cavity consisting of a resonator-based Vernier mirror and a phase shifter. Utilizing synchronous tuning of the integrated heaters, we show mode-hop-free wavelength tuning over a range larger than 100 GHz (200 pm). To demonstrate the potential of the device, we investigate two illustrative applications: (i) the linear characterization of a silicon nitride microresonator designed for entangled-photon pair generation, and (ii) the absorption spectroscopy and locking to the D1 and D2 transition lines of 87-Rb. The performance of the proposed integrated laser holds promise for a broader spectrum of both classical and quantum applications in the visible range, encompassing communication, control, sensing, and computing.
△ Less
Submitted 22 July, 2024;
originally announced July 2024.
-
Advances in laser-plasma interactions using intense vortex laser beams
Authors:
Yin Shi,
Xiaomei Zhang,
Alexey Arefiev,
Baifei Shen
Abstract:
Low-intensity light beams carrying Orbital Angular Momentum (OAM), commonly known as vortex beams, have garnered significant attention due to promising applications in areas ranging from optical trapping to communication. In recent years, there has been a surge in global research exploring the potential of high-intensity vortex laser beams and specifically their interactions with plasmas. This pap…
▽ More
Low-intensity light beams carrying Orbital Angular Momentum (OAM), commonly known as vortex beams, have garnered significant attention due to promising applications in areas ranging from optical trapping to communication. In recent years, there has been a surge in global research exploring the potential of high-intensity vortex laser beams and specifically their interactions with plasmas. This paper provides a comprehensive review of recent advances in this area. Compared to conventional laser beams, intense vortex beams exhibit unique properties such as twisted phase fronts, OAM delivery, hollow intensity distribution, and spatially isolated longitudinal fields. These distinct characteristics give rise to a multitude of rich phenomena, profoundly influencing laser-plasma interactions and offering diverse applications. The paper also discusses future prospects and identifies promising general research areas involving vortex beams. These areas include low-divergence particle acceleration, instability suppression, high-energy photon delivery with OAM, and the generation of strong magnetic fields. With growing scientific interest and application potential, the study of intense vortex lasers is poised for rapid development in the coming years.
△ Less
Submitted 28 May, 2024;
originally announced May 2024.
-
Neural Operator for Accelerating Coronal Magnetic Field Model
Authors:
Yutao Du,
Qin Li,
Raghav Gnanasambandam,
Mengnan Du,
Haimin Wang,
Bo Shen
Abstract:
Studying the sun's outer atmosphere is challenging due to its complex magnetic fields impacting solar activities. Magnetohydrodynamics (MHD) simulations help model these interactions but are extremely time-consuming (usually on a scale of days). Our research applies the Fourier Neural Operator (FNO) to accelerate the coronal magnetic field modeling, specifically, the Bifrost MHD model. We apply Te…
▽ More
Studying the sun's outer atmosphere is challenging due to its complex magnetic fields impacting solar activities. Magnetohydrodynamics (MHD) simulations help model these interactions but are extremely time-consuming (usually on a scale of days). Our research applies the Fourier Neural Operator (FNO) to accelerate the coronal magnetic field modeling, specifically, the Bifrost MHD model. We apply Tensorized FNO (TFNO) to generate solutions from partial differential equations (PDEs) over a 3D domain efficiently. TFNO's performance is compared with other deep learning methods, highlighting its accuracy and scalability. Physics analysis confirms that TFNO is reliable and capable of accelerating MHD simulations with high precision. This advancement improves efficiency in data handling, enhances predictive capabilities, and provides a better understanding of magnetic topologies.
△ Less
Submitted 26 June, 2024; v1 submitted 21 May, 2024;
originally announced May 2024.
-
Search for solar axions by Primakoff effect with the full dataset of the CDEX-1B Experiment
Authors:
L. T. Yang,
S. K. Liu,
Q. Yue,
K. J. Kang,
Y. J. Li,
H. P. An,
Greeshma C.,
J. P. Chang,
Y. H. Chen,
J. P. Cheng,
W. H. Dai,
Z. Deng,
C. H. Fang,
X. P. Geng,
H. Gong,
Q. J. Guo,
T. Guo,
X. Y. Guo,
L. He,
J. R. He,
J. W. Hu,
H. X. Huang,
T. C. Huang,
L. Jiang,
S. Karmakar
, et al. (61 additional authors not shown)
Abstract:
We present the first limit on $g_{Aγ}$ coupling constant using the Bragg-Primakoff conversion based on an exposure of 1107.5 kg days of data from the CDEX-1B experiment at the China Jinping Underground Laboratory. The data are consistent with the null signal hypothesis, and no excess signals are observed. Limits of the coupling $g_{Aγ}<2.08\times10^{-9}$ GeV$^{-1}$ (95\% C.L.) are derived for axio…
▽ More
We present the first limit on $g_{Aγ}$ coupling constant using the Bragg-Primakoff conversion based on an exposure of 1107.5 kg days of data from the CDEX-1B experiment at the China Jinping Underground Laboratory. The data are consistent with the null signal hypothesis, and no excess signals are observed. Limits of the coupling $g_{Aγ}<2.08\times10^{-9}$ GeV$^{-1}$ (95\% C.L.) are derived for axions with mass up to 100 eV/$c^2$. Within the hadronic model of KSVZ, our results exclude axion mass $>5.3~\rm{eV}/c^2$ at 95\% C.L.
△ Less
Submitted 12 May, 2024;
originally announced May 2024.
-
First Search for Light Fermionic Dark Matter Absorption on Electrons Using Germanium Detector in CDEX-10 Experiment
Authors:
J. X. Liu,
L. T. Yang,
Q. Yue,
K. J. Kang,
Y. J. Li,
H. P. An,
Greeshma C.,
J. P. Chang,
Y. H. Chen,
J. P. Cheng,
W. H. Dai,
Z. Deng,
C. H. Fang,
X. P. Geng,
H. Gong,
Q. J. Guo,
T. Guo,
X. Y. Guo,
L. He,
J. R. He,
J. W. Hu,
H. X. Huang,
T. C. Huang,
L. Jiang,
S. Karmakar
, et al. (61 additional authors not shown)
Abstract:
We present the first results of the search for sub-MeV fermionic dark matter absorbed by electron targets of Germanium using the 205.4~kg$\cdot$day data collected by the CDEX-10 experiment, with the analysis threshold of 160~eVee. No significant dark matter (DM) signals over the background are observed. Results are presented as limits on the cross section of DM--electron interaction. We present ne…
▽ More
We present the first results of the search for sub-MeV fermionic dark matter absorbed by electron targets of Germanium using the 205.4~kg$\cdot$day data collected by the CDEX-10 experiment, with the analysis threshold of 160~eVee. No significant dark matter (DM) signals over the background are observed. Results are presented as limits on the cross section of DM--electron interaction. We present new constraints of cross section in the DM range of 0.1--10 keV/$c^2$ for vector and axial-vector interaction. The upper limit on the cross section is set to be $\rm 5.5\times10^{-46}~cm^2$ for vector interaction, and $\rm 1.8\times10^{-46}~cm^2$ for axial-vector interaction at DM mass of 5 keV/$c^2$.
△ Less
Submitted 15 April, 2024;
originally announced April 2024.
-
Adaptive Anomaly Detection Disruption Prediction Starting from First Discharge on Tokamak
Authors:
Xinkun Ai,
Wei Zheng,
Ming Zhang,
Yonghua Ding,
Dalong Chen,
Zhongyong Chen,
Bihao Guo,
Chengshuo Shen,
Nengchao Wang,
Zhoujun Yang,
Zhipeng Chen,
Yuan Pan,
Biao Shen,
Binjia Xiao
Abstract:
Plasma disruption presents a significant challenge in tokamak fusion, where it can cause severe damage and economic losses. Current disruption predictors mainly rely on data-driven methods, requiring extensive discharge data for training. However, future tokamaks require disruption prediction from the first shot, posing challenges of data scarcity during the early operation period. In this period…
▽ More
Plasma disruption presents a significant challenge in tokamak fusion, where it can cause severe damage and economic losses. Current disruption predictors mainly rely on data-driven methods, requiring extensive discharge data for training. However, future tokamaks require disruption prediction from the first shot, posing challenges of data scarcity during the early operation period. In this period disruption prediction aims to support safe exploration of operation range and accumulate necessary data to develop advanced prediction models. Thus, predictors must adapt to evolving plasma environments during this exploration phase. To address these issues, this study proposes a cross-tokamak adaptive deployment method using the Enhanced Convolutional Autoencoder Anomaly Detection (E-CAAD) predictor, enabling disruption prediction from the first shot of new devices. Experimental results indicate the ability of E-CAAD model trained on existing devices to effectively differentiate between disruption precursors and non-disruption samples on new devices, proving the feasibility of model cross-device transfer. Building upon this, adaptive learning from scratch and threshold adaptive adjustment strategies are proposed to achieve model cross-device transfer. The adaptive learning from scratch strategy enables the predictor to use scarce data during the early operation of the new device while rapidly adapting to changes in operation environment. The threshold adaptive adjustment strategy addresses the challenge of selecting warning thresholds on new devices where validation set is lacking, ensuring that the warning thresholds adapt to changes in the operation environment. Finally, experiments transferring the model from J-TEXT to EAST exhibit comparable performance to EAST models trained with ample data, achieving a TPR of 85.88% and a FPR of 6.15%, with a 20ms reserved MGI system reaction time.
△ Less
Submitted 26 June, 2024; v1 submitted 12 April, 2024;
originally announced April 2024.
-
Single-Shot Single-Beam Coherent Raman Scattering Thermometry Based on Air Lasing
Authors:
Xu Lu,
Yewei Chen,
Francesco Mazza,
Siyi He,
Zihan Li,
Shunlin Huang,
Quanjun Wang,
Ning Zhang,
Bo Shen,
Yuzhu Wu,
Jinping Yao,
Ya Cheng
Abstract:
Thermometric techniques with high accuracy, fast response speed and ease of implementation are desirable for the study of dynamic combustion environments, transient reacting flows, and non-equilibrium plasmas. Herein, single-shot single-beam coherent Raman scattering (SS-CRS) thermometry is developed, for the first time to our knowledge, by using air lasing as a probe. It's proved that the air-las…
▽ More
Thermometric techniques with high accuracy, fast response speed and ease of implementation are desirable for the study of dynamic combustion environments, transient reacting flows, and non-equilibrium plasmas. Herein, single-shot single-beam coherent Raman scattering (SS-CRS) thermometry is developed, for the first time to our knowledge, by using air lasing as a probe. It's proved that the air-lasing-assisted CRS signal has a high signal-to-noise ratio enabling single-shot measurements at a 1 kHz repetition rate. The SS-CRS thermometry consistently exhibits precision better than 2% at different temperatures, but the inaccuracy grows with the increase in temperature. The high detection precision, 1 kHz acquisition rate and easy-to-implement single-beam scheme are achieved thanks to the unique temporal, spectral and spatial characteristics of air lasing. This work opens a novel avenue for high-speed CRS thermometry, holding tremendous potential for fast diagnostics of transient reacting flows and plasmas.
△ Less
Submitted 17 March, 2024;
originally announced March 2024.
-
Factors influencing the stability of the motor-clutch model on compliant substrates under external load
Authors:
Beibei Shen,
Yunxin Zhang
Abstract:
Cellular migration is crucial for biological processes including embryonic development, immune response, and wound healing. The myosin-clutch model is a framework that describes how cells control migration through the interactions between myosin, the clutch mechanism, and the substrate. This model is related to how cells regulate adhesion, generate traction forces, and move on compliant substrates…
▽ More
Cellular migration is crucial for biological processes including embryonic development, immune response, and wound healing. The myosin-clutch model is a framework that describes how cells control migration through the interactions between myosin, the clutch mechanism, and the substrate. This model is related to how cells regulate adhesion, generate traction forces, and move on compliant substrates. In this study, we present a five-dimensional nonlinear autonomous system to investigate the influences of myosin, clutches, substrate, and external load on the system's stability. Moreover, we analyze the effects of various parameters on fixed points and explore the frequency and amplitude of the limit cycle associated with oscillations. We discovered that the system demonstrates oscillatory behavior when the velocity of the myosin motor is relatively low, or when the ratio of the motor attachment rate to motor detachment rate is relatively high. The external load shares a fraction of the force exerted by myosin motors, thereby diminishing the force endured by the clutches. Within a specific range, an increase in external load not only diminishes and eventually eliminates the region lacking fixed points but also decelerates clutch detachment, enhancing clutch protein adherence.
△ Less
Submitted 28 February, 2024;
originally announced February 2024.
-
High-coherence parallelization in integrated photonics
Authors:
Xuguang Zhang,
Zixuan Zhou,
Yijun Guo,
Minxue Zhuang,
Warren Jin,
Bitao Shen,
Yujun Chen,
Jiahui Huang,
Zihan Tao,
Ming Jin,
Ruixuan Chen,
Zhangfeng Ge,
Zhou Fang,
Ning Zhang,
Yadong Liu,
Pengfei Cai,
Weiwei Hu,
Haowen Shu,
Dong Pan,
John E. Bowers,
Xingjun Wang,
Lin Chang
Abstract:
Coherent optics has profoundly impacted diverse applications ranging from communications, LiDAR to quantum computations. However, building coherent systems in integrated photonics previously came at great expense in hardware integration and energy efficiency: the lack of a power-efficient way to generate highly coherent light necessitates bulky lasers and amplifiers, while frequency and phase reco…
▽ More
Coherent optics has profoundly impacted diverse applications ranging from communications, LiDAR to quantum computations. However, building coherent systems in integrated photonics previously came at great expense in hardware integration and energy efficiency: the lack of a power-efficient way to generate highly coherent light necessitates bulky lasers and amplifiers, while frequency and phase recovery schemes require huge digital signal processing resources. In this work, we demonstrate a high-coherence parallelization strategy that facilitates advanced integrated coherent systems at a minimum price. Using a self-injection locked microcomb to injection lock a distributed feedback laser array, we boost the microcomb power by a record high gain of up to 60 dB on chip with no degradation in coherence. This strategy enables tens of highly coherent channels with an intrinsic linewidth down to the 10 Hz level and power of more than 20 dBm. The overall electrical to optical wall-plug efficiency reaches 19%, comparable with that of the state-of-the-art semiconductor lasers. Driven by this parallel source, we demonstrate a silicon photonic communication link with an unprecedented data rate beyond 60 Tbit/s. Importantly, the high coherence we achieve reduces the coherent-related DSP consumption by 99.999% compared with the traditional III-V laser pump scheme. This work paves a way to realizing scalable, high-performance coherent integrated photonic systems, potentially benefiting numerous applications.
△ Less
Submitted 14 December, 2023;
originally announced December 2023.
-
Cross-Tokamak Deployment Study of Plasma Disruption Predictors Based on Convolutional Autoencoder
Authors:
Xinkun Ai,
Wei Zheng,
Ming Zhang,
Yonghua Ding,
Dalong Chen,
Zhongyong Chen,
Chengshuo Shen,
Bihao Guo,
Nengchao Wang,
Zhoujun Yang,
Zhipeng Chen,
Yuan Pan,
Biao Shen,
Binjia Xiao,
J-TEXT team
Abstract:
In the initial stages of operation for future tokamak, facing limited data availability, deploying data-driven disruption predictors requires optimal performance with minimal use of new device data. This paper studies the issue of data utilization in data-driven disruption predictor during cross tokamak deployment. Current predictors primarily employ supervised learning methods and require a large…
▽ More
In the initial stages of operation for future tokamak, facing limited data availability, deploying data-driven disruption predictors requires optimal performance with minimal use of new device data. This paper studies the issue of data utilization in data-driven disruption predictor during cross tokamak deployment. Current predictors primarily employ supervised learning methods and require a large number of disruption and non-disruption shots for training. However, the scarcity and high cost of obtaining disruption shots for future tokamaks result in imbalanced training datasets, reducing the performance of supervised learning predictors. To solve this problem, we propose the Enhanced Convolutional Autoencoder Anomaly Detection (E-CAAD) predictor. E-CAAD can be only trained by normal samples from non-disruption shots and can also be trained by disruption precursor samples when disruption shots occur. This model not only overcomes the sample imbalance in supervised learning predictors, but also overcomes the inefficient dataset utilization faced by traditional anomaly detection predictors that cannot use disruption precursor samples for training, making it more suitable for the unpredictable datasets of future tokamaks. Compared to traditional anomaly detection predictor, the E-CAAD predictor performs better in disruption prediction and is deployed faster on new devices. Additionally, we explore strategies to accelerate deployment of E-CAAD predictor on the new device by using data from existing devices. Two deployment strategies are presented: mixing data from existing devices and fine-tuning the predictor trained on existing devices. Our comparisons indicate that the data from existing device can accelerate the deployment of predictor on new device. Notably, the fine-tuning strategy yields the fastest deployment on new device among the designed strategies.
△ Less
Submitted 4 January, 2024; v1 submitted 17 November, 2023;
originally announced November 2023.
-
Cross-tokamak Disruption Prediction based on Physics-Guided Feature Extraction and domain adaptation
Authors:
Chengshuo Shen,
Wei Zheng,
Bihao Guo,
Yonghua Ding,
Dalong Chen,
Xinkun Ai,
Fengming Xue,
Yu Zhong,
Nengchao Wang,
Biao Shen,
Binjia Xiao,
Zhongyong Chen,
Yuan Pan,
J-TEXT team
Abstract:
The high acquisition cost and the significant demand for disruptive discharges for data-driven disruption prediction models in future tokamaks pose an inherent contradiction in disruption prediction research. In this paper, we demonstrated a novel approach to predict disruption in a future tokamak using only a few discharges. The first step is to use the existing understanding of physics to extrac…
▽ More
The high acquisition cost and the significant demand for disruptive discharges for data-driven disruption prediction models in future tokamaks pose an inherent contradiction in disruption prediction research. In this paper, we demonstrated a novel approach to predict disruption in a future tokamak using only a few discharges. The first step is to use the existing understanding of physics to extract physics-guided features from the diagnostic signals of each tokamak, called physics-guided feature extraction (PGFE). The second step is to align a few data from the future tokamak (target domain) and a large amount of data from existing tokamak (source domain) based on a domain adaptation algorithm called CORrelation ALignment (CORAL). It is the first attempt at applying domain adaptation in the task of disruption prediction. PGFE has been successfully applied in J-TEXT to predict disruption with excellent performance. PGFE can also reduce the data volume requirements due to extracting the less device-specific features, thereby establishing a solid foundation for cross-tokamak disruption prediction. We have further improved CORAL (supervised CORAL, S-CORAL) to enhance its appropriateness in feature alignment for the disruption prediction task. To simulate the existing and future tokamak case, we selected J-TEXT as the existing tokamak and EAST as the future tokamak, which has a large gap in the ranges of plasma parameters. The utilization of the S-CORAL improves the disruption prediction performance on future tokamak. Through interpretable analysis, we discovered that the learned knowledge of the disruption prediction model through this approach exhibits more similarities to the model trained on large data volumes of future tokamak.
△ Less
Submitted 1 November, 2023; v1 submitted 11 September, 2023;
originally announced September 2023.
-
Extremely powerful and frequency-tunable terahertz pulses from a table-top laser-plasma wiggler
Authors:
Jie Cai,
Yinren Shou,
Yixing Geng,
Liqi Han,
Xinlu Xu,
Shuangchung Wen,
Baifei Shen,
Jinqing Yu,
Xueqing Yan
Abstract:
The production of broadband, terawatt terahertz (THz) pulses has been demonstrated by irradiating relativistic lasers on solid targets. However, the generation of extremely powerful, narrow-band, and frequency-tunable THz pulses remains a challenge. Here, we present a novel approach for such THz pulses, in which a plasma wiggler is elaborated by a table-top laser and a near-critical density plasma…
▽ More
The production of broadband, terawatt terahertz (THz) pulses has been demonstrated by irradiating relativistic lasers on solid targets. However, the generation of extremely powerful, narrow-band, and frequency-tunable THz pulses remains a challenge. Here, we present a novel approach for such THz pulses, in which a plasma wiggler is elaborated by a table-top laser and a near-critical density plasma. In such a wiggler, the laser-accelerated electrons emit THz radiations with a period closely related to the plasma thickness. Theoretical model and numerical simulations predict a THz pulse with a laser-THz energy conversion over 2.0$\%$, an ultra-strong field exceeding 80 GV/m, a divergence angle approximately 20$^\circ$, and a center-frequency tunable from 4.4 to 1.5 THz, can be generated from a laser of 430 mJ. Furthermore, we demonstrate that this method can work across a wide range of laser and plasma parameters, offering potential for future applications with extremely powerful THz pulse.
△ Less
Submitted 25 August, 2023;
originally announced August 2023.
-
Compact Petawatt-Class Laser Wakefield Acceleration with Plasma Telescope
Authors:
Xuesong Geng,
Liangliang Ji,
Baifei Shen
Abstract:
The compactness of laser wakefield acceleration (LWFA) is limited by its long focal length for high power lasers, e.g., more than 10 meters for 1-peatawatt (PW) laser pulse and up to hundreds of meters for 10-100 PW lasers. The long focal length originates from the low damage threshold of the optical off-axial parabolic (OAP) mirror and consequent large spot size. We propose implementing an OAP pl…
▽ More
The compactness of laser wakefield acceleration (LWFA) is limited by its long focal length for high power lasers, e.g., more than 10 meters for 1-peatawatt (PW) laser pulse and up to hundreds of meters for 10-100 PW lasers. The long focal length originates from the low damage threshold of the optical off-axial parabolic (OAP) mirror and consequent large spot size. We propose implementing an OAP plasma mirror (PM) to form a telescope geometry, reducing the beam size and hence constraining the focal length to meter-range for LWFA driven by lasers beyond 1PW. Three-dimensional particle-in-cell simulations are performed to characterize the reflection of a 1-PW laser by the plasma OAP and find that optimal condition is achieved within only 1-m optical length. The new method successfully generates 9GeV electron bunch in the subsequent LWFA stage with consistent acceleration gradients to that of the 1-PW laser via ordinary focusing. The proposed geometry provides a solution of compact LWFAs available for even 100-PW laser systems.
△ Less
Submitted 19 September, 2023; v1 submitted 9 August, 2023;
originally announced August 2023.
-
Cooperation of myosin II in muscle contraction through nonlinear elasticity
Authors:
Beibei Shen,
Yunxin Zhang
Abstract:
Myosin II plays a pivotal role in muscle contraction by generating force through the cooperative action of multiple motors on actin filaments. In this study, we integrate the nonlinear elasticity of the neck linker in individual myosin II and comprehensively investigate the evolution of cooperativity and dynamics at {\it microstate} and {\it mesostate} levels using a combined model of single and m…
▽ More
Myosin II plays a pivotal role in muscle contraction by generating force through the cooperative action of multiple motors on actin filaments. In this study, we integrate the nonlinear elasticity of the neck linker in individual myosin II and comprehensively investigate the evolution of cooperativity and dynamics at {\it microstate} and {\it mesostate} levels using a combined model of single and multiple motors. We find that a substantial proportion of actin-bound motors reside in the {\it mid-} and {\it post-power stroke} states, and our nonlinear model reveals their increased capacity for load sharing. Additionally, we systematically explore the impact of mechanical load and ATP concentration on myosin II motors. Notably, we observe that the average net distance of actin undergoes a transition from a weak load-sensitive regime at low ATP concentrations to a load-sensitive regime at higher ATP concentrations. Furthermore, increasing the load or raising the ATP concentration to saturation can enhance the efficiency and output power of myosin filament. Moreover, the efficiency of the myosin filament increases with the power stroke strength, reaching a maximum at a specific range, and subsequently declining beyond that threshold. Finally, we explore the mean run time/length and mean existence probability of myosin filament, shedding light on its overall behavior.
△ Less
Submitted 19 June, 2023;
originally announced June 2023.
-
Stable radiation field positron acceleration in a micro-tube
Authors:
Meiyu Si,
Yongsheng Huang,
Manqi Ruan,
Baifei Shen,
Zhangli Xu,
Tongpu Yu,
Xiongfei Wang,
Yuan Chen
Abstract:
Nowadays, there is a desperate need for an ultra-acceleration-gradient method for antimatter particles, which holds great significance in exploring the origin of matter, CP violation, astrophysics, and medical physics. Compared to traditional accelerators with low gradients and a limited acceleration region for positrons in laser-driven charge separation fields, we propose an innovative high-gradi…
▽ More
Nowadays, there is a desperate need for an ultra-acceleration-gradient method for antimatter particles, which holds great significance in exploring the origin of matter, CP violation, astrophysics, and medical physics. Compared to traditional accelerators with low gradients and a limited acceleration region for positrons in laser-driven charge separation fields, we propose an innovative high-gradient positron acceleration mechanism with implementation advantages. Injecting a relativistic electron beam into a dense plasma micro-tube generates a stable and periodic high-intensity mid-infrared radiation (mid-IR) field, reaching tens of GV/m. This field, propagating synchronously with the electron beam, achieves a 1 GeV energy gain for the positron bunch within 140 picoseconds with a minimal energy spread-approximately 1.56% during a stable phase. By utilizing continuous mid-IR, the efficiency of energy transfer from the electron beam to either a single positron bunch or three positron bunches simultaneously could reach up to 20% and 40%, respectively. This acceleration scheme can achieve cascaded acceleration for a single positron bunch and series acceleration for multiple positron bunches in a continuous, stable, and efficient manner.
△ Less
Submitted 10 January, 2024; v1 submitted 23 February, 2023;
originally announced February 2023.
-
Generation of Quantum Vortex Electrons with Intense Laser Pulses
Authors:
Zhigang Bu,
Liangliang Ji,
Xuesong Geng,
Shiyu Liu,
Shaohu Lei,
Baifei Shen,
Ruxin Li,
Zhizhan Xu
Abstract:
Accelerating a free electron to high energy forms the basis for studying particle and nuclear physics. Here it is shown that wavefunction of such an energetic electron can be further manipulated with femtosecond intense lasers. During the scattering between a high-energy electron and a strong laser pulse, we find a regime where the enormous photon spin angular momenta can be efficiently transferre…
▽ More
Accelerating a free electron to high energy forms the basis for studying particle and nuclear physics. Here it is shown that wavefunction of such an energetic electron can be further manipulated with femtosecond intense lasers. During the scattering between a high-energy electron and a strong laser pulse, we find a regime where the enormous photon spin angular momenta can be efficiently transferred to the electron orbital angular momentum (OAM). The wavefunction of the scattered electron is twisted from its initial plane-wave state to quantum vortex state. Nonlinear quantum electrodynamics (QED) theory suggests that GeV-level electrons acquire average intrinsic OAM beyond 100 h-barat laser intensities of 10^20W/cm^2 with linear scaling. These electrons emit gamma photons with double-peaked spectrum, which sets them apart from ordinary electrons. The findings demonstrate a proficient method for generating relativistic leptons with quantum vortex wavefunctions based on existing laser technology, thereby fostering a novel source for particle and nuclear physics.
△ Less
Submitted 9 August, 2024; v1 submitted 10 February, 2023;
originally announced February 2023.
-
Slow light silicon modulator beyond 110 GHz bandwidth
Authors:
Changhao Han,
Zhao Zheng,
Haowen Shu,
Ming Jin,
Jun Qin,
Ruixuan Chen,
Yuansheng Tao,
Bitao Shen,
Bowen Bai,
Fenghe Yang,
Yimeng Wang,
Haoyu Wang,
Feifan Wang,
Zixuan Zhang,
Shaohua Yu,
Chao Peng,
Xingjun Wang
Abstract:
Silicon modulators are key components in silicon photonics to support the dense integration of electro-optic (EO) functional elements on a compact chip for various applications including high-speed data transmission, signal processing, and photonic computing. Despite numerous advances in promoting the operation speed of silicon modulators, a bandwidth ceiling of 67 GHz emerges in practices and bec…
▽ More
Silicon modulators are key components in silicon photonics to support the dense integration of electro-optic (EO) functional elements on a compact chip for various applications including high-speed data transmission, signal processing, and photonic computing. Despite numerous advances in promoting the operation speed of silicon modulators, a bandwidth ceiling of 67 GHz emerges in practices and becomes an obstacle to paving silicon photonics toward Tbps level data throughput on a single chip. Here, we theoretically propose and experimentally demonstrate a design strategy for silicon modulators by employing the slow light effect, which shatters the present bandwidth ceiling of silicon modulators and pushes its limit beyond 110 GHz in a small footprint. The proposed silicon modulator is built on a coupled-resonator optical waveguide (CROW) architecture, in which a set of Bragg gratings are appropriately cascaded to give rise to a slow light effect. By comprehensively balancing a series of merits including the group index, photon lifetime, electrical bandwidth, and losses, we found the modulators can benefit from the slow light for better modulation efficiency and compact size while remaining their bandwidth sufficiently high to support ultra-high-speed data transmission. Consequently, we realize a modulator with an EO bandwidth of 110 GHz in a length of 124 μm, and demonstrate a data rate beyond 110 Gbps by applying simple on-off keying modulation for a DSP-free operation. Our work proves that silicon modulators beyond 110 GHz are feasible, thus shedding light on the potentials of silicon photonics in ultra-high-bandwidth applications such as data communication, optical interconnection, and photonic machine learning.
△ Less
Submitted 7 February, 2023;
originally announced February 2023.
-
Suppression of stimulated Raman scattering by angularly incoherent light, towards a laser system of incoherence in all dimensions of time, space, and angle
Authors:
Yi Guo,
Xiaomei Zhang,
Dirui Xu,
Xinju Guo,
Baifei Shen,
Ke Lan
Abstract:
Laser-plasma instability (LPI) is one of the main obstacles in laser-driven inertial confinement fusion (ICF) for achieving predictable and reproducible fusion at high gain. For the first time we have proved analytically and confirmed with three-dimensional particle-in-cell simulations that angular incoherence has additional and much stronger suppression of the instability growth rate than the wel…
▽ More
Laser-plasma instability (LPI) is one of the main obstacles in laser-driven inertial confinement fusion (ICF) for achieving predictable and reproducible fusion at high gain. For the first time we have proved analytically and confirmed with three-dimensional particle-in-cell simulations that angular incoherence has additional and much stronger suppression of the instability growth rate than the well-known temporal incoherence and spatial incoherence usually used in ICF studies. For the model used in our calculations, the maximum field ratio between the stimulated Raman scattering and the driving pulses drops from 0.2 for the Laguerre-Gaussian pulse with a single non-zero topological charge to 0.05 for the super light spring with an angular momentum spread and random relative phases. In particular, angular incoherence does not introduce extra undesirable hot electrons. This opens a novel way to suppress LPI with the light of an angular momentum spread and paves the way towards a low LPI laser system with a super light spring of incoherence in all dimensions of time, space, and angle.
△ Less
Submitted 21 November, 2022;
originally announced November 2022.
-
Laboratory observation of ion acceleration via reflection off laser-produced magnetized collisionless shocks
Authors:
Hui-bo Tang,
Yu-fei,
Hao,
Guang-yue Hu,
Quan-ming Lu,
Chuang Ren,
Yu Zhang,
Ao Guo,
Peng Hu,
Yu-lin Wang,
Xiang-bing Wang,
Zhen-chi Zhang,
Peng Yuan,
Wei Liu,
Hua-chong Si,
Chun-kai Yu,
Jia-yi Zhao,
Jin-can Wang,
Zhe Zhang,
Xiao-hui Yuan,
Da-wei Yuan,
Zhi-yong Xie,
Jun Xiong,
Zhi-heng Fang,
Jian-cai Xu
, et al. (7 additional authors not shown)
Abstract:
Fermi acceleration by collisionless shocks is believed to be the primary mechanism to produce high energy charged particles in the Universe,where charged particles gain energy successively from multiple reflections off the shock front.Here,we present the first direct experimental evidence of ion energization from reflection off a supercritical quasi perpendicular collisionless shock,an essential c…
▽ More
Fermi acceleration by collisionless shocks is believed to be the primary mechanism to produce high energy charged particles in the Universe,where charged particles gain energy successively from multiple reflections off the shock front.Here,we present the first direct experimental evidence of ion energization from reflection off a supercritical quasi perpendicular collisionless shock,an essential component of Fermi acceleration in a laser produced magnetized plasma. We observed a quasi monoenergetic ion beam with 2,4 times the shock velocity in the upstream flow using time of flight method. Our related kinetic simulations reproduced the energy gain and showed that these ions were first reflected and then accelerated mainly by the motional electric field associated with the shock. This mechanism can also explain the quasi monoenergetic fast ion component observed in the Earth's bow shock.
△ Less
Submitted 25 August, 2023; v1 submitted 6 November, 2022;
originally announced November 2022.
-
Flattening laser frequency comb spectra with a high dynamic range, broadband spectral shaper on-a-chip
Authors:
Nemanja Jovanovic,
Pradip Gatkine,
Boqiang Shen,
Maodong Gao,
Nick Cvetojevic,
Katarzyna Lawniczuk,
Ronald Broeke,
Charles Beichman,
Stephanie Leifer,
Jeffery Jewell,
Gautam Vasisht,
Dimitri Mawet
Abstract:
Spectral shaping is critical to many fields of science. In astronomy for example, the detection of exoplanets via the Doppler effect hinges on the ability to calibrate a high resolution spectrograph. Laser frequency combs can be used for this, but the wildly varying intensity across the spectrum can make it impossible to optimally utilize the entire comb, leading to a reduced overall precision of…
▽ More
Spectral shaping is critical to many fields of science. In astronomy for example, the detection of exoplanets via the Doppler effect hinges on the ability to calibrate a high resolution spectrograph. Laser frequency combs can be used for this, but the wildly varying intensity across the spectrum can make it impossible to optimally utilize the entire comb, leading to a reduced overall precision of calibration. To circumvent this, astronomical applications of laser frequency combs rely on a bulk optic setup which can flatten the output spectrum before sending it to the spectrograph. Such flatteners require complex and expensive optical elements like spatial light modulators and have non-negligible bench top footprints. Here we present an alternative in the form of an all-photonic spectral shaper that can be used to flatten the spectrum of a laser frequency comb. The device consists of a circuit etched into a silicon nitride wafer that supports an arrayed-waveguide grating to disperse the light over hundreds of nanometers in wavelength, followed by Mach-Zehnder interferometers to control the amplitude of each channel, thermo-optic phase modulators to phase the channels and a second arrayed-waveguide grating to recombine the spectrum. The demonstrator device operates from 1400 to 1800 nm (covering the astronomical H band), with twenty 20 nm wide channels. The device allows for nearly 40 dBs of dynamic modulation of the spectrum via the Mach-Zehnders , which is greater than that offered by most spatial light modulators. With a superluminescent diode, we reduced the static spectral variation to ~3 dB, limited by the properties of the components used in the circuit and on a laser frequency comb we managed to reduce the modulation to 5 dBs, sufficient for astronomical applications.
△ Less
Submitted 3 October, 2022;
originally announced October 2022.
-
An all-photonic, dynamic device for flattening the spectrum of a laser frequency comb for precise calibration of radial velocity measurements
Authors:
Nemanja Jovanovic,
Pradip Gatkine,
Boqiang Shen,
Maodong Gao,
Nick Cvetojevic,
Katarzyna Ławniczuk,
Ronald Broeke,
Charles Beichman,
Stephanie Leifer,
Jeffery Jewell,
Gautam Vasisht,
Dimitri Mawet
Abstract:
Laser frequency combs are fast becoming critical to reaching the highest radial velocity precisions. One shortcoming is the highly variable brightness of the comb lines across the spectrum (up to 4-5 orders of magnitude). This can result in some lines saturating while others are at low signal and lost in the noise. Losing lines to either of these effects reduces the precision and hence effectivene…
▽ More
Laser frequency combs are fast becoming critical to reaching the highest radial velocity precisions. One shortcoming is the highly variable brightness of the comb lines across the spectrum (up to 4-5 orders of magnitude). This can result in some lines saturating while others are at low signal and lost in the noise. Losing lines to either of these effects reduces the precision and hence effectiveness of the comb. In addition, the brightness of the comb lines can vary with time which could drive comb lines with initially reasonable SNR's into the two regimes described above. To mitigate these two effects, laser frequency combs use optical flattener's.
Flattener's are typically bulk optic setups that disperse the comb light with a grating, and then use a spatial light modulator to control the amplitude across the spectrum before recombining the light into another single mode fiber and sending it to the spectrograph. These setups can be large (small bench top), expensive (several hundred thousand dollars) and have limited stability. To address these issues, we have developed an all-photonic spectrum flattener on a chip. The device is constructed from optical waveguides on a SiN chip. The light from the laser frequency comb's output optical fiber can be directly connected to the chip, where the light is first dispersed using an arrayed waveguide grating. To control the brightness of each channel, the light is passed through a Mach-Zehnder interferometer before being recombined with a second arrayed waveguide grating. Thermo-optic phase modulators are used in each channel before recombination to path length match the channels as needed.
Here we present the results from our first generation prototype. The device operates from 1400-1800 nm (covering the H band), with 20, 20 nm wide channels.
△ Less
Submitted 20 September, 2022;
originally announced September 2022.
-
Transferable Cross-Tokamak Disruption Prediction with Deep Hybrid Neural Network Feature Extractor
Authors:
Wei Zheng,
Fengming Xue,
Ming Zhang,
Zhongyong Chen,
Chengshuo Shen,
Xinkun Ai,
Nengchao Wang,
Dalong Chen,
Bihao Guo,
Yonghua Ding,
Zhipeng Chen,
Zhoujun Yang,
Biao Shen,
Bingjia Xiao,
Yuan Pan
Abstract:
Predicting disruptions across different tokamaks is a great obstacle to overcome. Future tokamaks can hardly tolerate disruptions at high performance discharge. Few disruption discharges at high performance can hardly compose an abundant training set, which makes it difficult for current data-driven methods to obtain an acceptable result. A machine learning method capable of transferring a disrupt…
▽ More
Predicting disruptions across different tokamaks is a great obstacle to overcome. Future tokamaks can hardly tolerate disruptions at high performance discharge. Few disruption discharges at high performance can hardly compose an abundant training set, which makes it difficult for current data-driven methods to obtain an acceptable result. A machine learning method capable of transferring a disruption prediction model trained on one tokamak to another is required to solve the problem. The key is a disruption prediction model containing a feature extractor that is able to extract common disruption precursor traces in tokamak diagnostic data, and a transferable disruption classifier. Based on the concerns above, the paper first presents a deep fusion feature extractor designed specifically for extracting disruption precursor features from common diagnostics on tokamaks according to currently known precursors of disruption, providing a promising foundation for transferable models. The fusion feature extractor is proved by comparing with manual feature extraction on J-TEXT. Based on the feature extractor trained on J-TEXT, the disruption prediction model was transferred to EAST data with mere 20 discharges from EAST experiment. The performance is comparable with a model trained with 1896 discharges from EAST. From the comparison among other model training scenarios, transfer learning showed its potential in predicting disruptions across different tokamaks.
△ Less
Submitted 19 August, 2022;
originally announced August 2022.
-
Acceleration of 60 MeV proton beams in the commissioning experiment of SULF-10 PW laser
Authors:
A. X. Li,
C. Y. Qin,
H. Zhang,
S. Li,
L. L. Fan,
Q. S. Wang,
T. J. Xu,
N. W. Wang,
L. H. Yu,
Y. Xu,
Y. Q. Liu,
C. Wang,
X. L. Wang,
Z. X. Zhang,
X. Y. Liu,
P. L. Bai,
Z. B. Gan,
X. B. Zhang,
X. B. Wang,
C. Fan,
Y. J. Sun,
Y. H. Tang,
B. Yao,
X. Y. Liang,
Y. X. Leng
, et al. (3 additional authors not shown)
Abstract:
We report the experimental results of the commissioning phase in the 10 PW laser beamline of Shanghai Superintense Ultrafast Laser Facility (SULF). The peak power reaches 2.4 PW on target without the last amplifying during the experiment. The laser energy of 72\pm 9 J is directed to a focal spot of ~6 μm diameter (FWHM) in 30 fs pulse duration, yielding a focused peak intensity around 2.0 \times 1…
▽ More
We report the experimental results of the commissioning phase in the 10 PW laser beamline of Shanghai Superintense Ultrafast Laser Facility (SULF). The peak power reaches 2.4 PW on target without the last amplifying during the experiment. The laser energy of 72\pm 9 J is directed to a focal spot of ~6 μm diameter (FWHM) in 30 fs pulse duration, yielding a focused peak intensity around 2.0 \times 10^{21} W/cm^2. First laser-proton acceleration experiment is performed using plain copper and plastic targets. High-energy proton beams with maximum cut-off energy up to 62.5 MeV are achieved using copper foils at the optimum target thickness of 4 μm via target normal sheath acceleration (TNSA). For plastic targets of tens of nanometers thick, the proton cut-off energy is approximately 20 MeV, showing ring-like or filamented density distributions. These experimental results reflect the capabilities of the SULF-10 PW beamline, e.g., both ultrahigh intensity and relatively good beam contrast. Further optimization for these key parameters is underway, where peak laser intensities of 10^{22}-10^{23} W/cm^2 are anticipated to support various experiments on extreme field physics.
△ Less
Submitted 14 July, 2022;
originally announced July 2022.
-
Self-injection-locked second-harmonic integrated source
Authors:
Jingwei Ling,
Jeremy Staffa,
Heming Wang,
Boqiang Shen,
Lin Chang,
Usman A. Javid,
Lue Wu,
Zhiquan Yuan,
Raymond Lopez-Rios,
Mingxiao Li,
Yang He,
Bohan Li,
John E. Bowers,
Kerry J. Vahala,
Qiang Lin
Abstract:
High coherence visible and near-visible laser sources are centrally important to the operation of advanced position/navigation/timing systems as well as classical/quantum sensing systems. However, the complexity and size of these bench-top lasers is an impediment to their transitioning beyond the laboratory. Here, a system-on-a-chip that emits high-coherence visible and near-visible lightwaves is…
▽ More
High coherence visible and near-visible laser sources are centrally important to the operation of advanced position/navigation/timing systems as well as classical/quantum sensing systems. However, the complexity and size of these bench-top lasers is an impediment to their transitioning beyond the laboratory. Here, a system-on-a-chip that emits high-coherence visible and near-visible lightwaves is demonstrated. The devices rely upon a new approach wherein wavelength conversion and coherence increase by self-injection-locking are combined within in a single nonlinear resonator. This simplified approach is demonstrated in a hybridly-integrated device and provides a short-term linewidth around 10-30 kHz. On-chip, converted optical power over 2 mW is also obtained. Moreover, measurements show that heterogeneous integration can result in conversion efficiency higher than 25% with output power over 11 mW. Because the approach uses mature III-V pump lasers in combination with thin-film lithium niobate, it can be scaled for low-cost manufacturing of high-coherence visible emitters. Also, the coherence generation process can be transferred to other frequency conversion processes including optical parametric oscillation, sum/difference frequency generation, and third-harmonic generation.
△ Less
Submitted 6 July, 2022;
originally announced July 2022.
-
Enhanced signature of vacuum birefringence in a plasma wakefield
Authors:
Feng Wan,
Ting Sun,
Bai-Fei Shen,
Chong Lv,
Qian Zhao,
Mamutjan Ababekri,
Yong-Tao Zhao,
Karen Z. Hatsagortsyan,
Christoph H. Keitel,
Jian-Xing Li
Abstract:
Vacuum birefringence (VB) is a basic phenomenon predicted in quantum electrodynamics (QED). However, due to the smallness of the signal, conventional magnet-based and extremely intense laser-driven detection methods are still very challenging. This is because in the first case the interaction length is large but the field is limited, and vice versa in the second case. We put forward a method to ge…
▽ More
Vacuum birefringence (VB) is a basic phenomenon predicted in quantum electrodynamics (QED). However, due to the smallness of the signal, conventional magnet-based and extremely intense laser-driven detection methods are still very challenging. This is because in the first case the interaction length is large but the field is limited, and vice versa in the second case. We put forward a method to generate and detect VB in a plasma bubble wakefield, which combines both advantages, providing large fields along large interaction lengths. A polarized $γ$-photon beam is considered to probe the wakefield along a propagation distance of millimeters to centimeters in the plasma bubble. We find via plasma particle-in-cell simulations that the VB signal in terms of Stokes parameters can reach about $ 10^{-5}$ ($10^{-3}$-$10^{-2}$) for tens of MeV (GeV) probe photons with moderately intense lasers ($10^{20}$-$10^{21}~\mathrm{W/cm^2}$). The main source of noise from plasma electrons is mitigated, in particular, by a choice of $γ$-photon polarization and by proper modulation of the plasma density. The proposed method represents an attractive alternative for the experimental observation of VB via laser-plasma interaction.
△ Less
Submitted 26 July, 2023; v1 submitted 21 June, 2022;
originally announced June 2022.
-
The `n2EDM MSR' -- a very large magnetically shielded room with an exceptional performance for fundamental physics measurements
Authors:
N. J. Ayres,
G. Ban,
G. Bison,
K. Bodek,
V. Bondar,
T. Bouillaud,
B. Clement,
E. Chanel,
P. -J. Chiu,
C. B. Crawford,
M. Daum,
C. B. Doorenbos,
S. Emmenegger,
A. Fratangelo,
M. Fertl,
W. C. Griffith,
Z. D. Grujic,
P. G. Harris,
K. Kirch,
J. Krempel,
B. Lauss,
T. Lefort,
O. Naviliat-Cuncic,
D. Pais,
F. M. Piegsa
, et al. (19 additional authors not shown)
Abstract:
We present the magnetically shielded room (MSR) for the n2EDM experiment at the Paul Scherrer Institute which features an interior cubic volume with each side of length 2.92m, thus providing an accessible space of 25m3. The MSR has 87 openings up to 220mm diameter to operate the experimental apparatus inside, and an intermediate space between the layers for sensitive signal processing electronics.…
▽ More
We present the magnetically shielded room (MSR) for the n2EDM experiment at the Paul Scherrer Institute which features an interior cubic volume with each side of length 2.92m, thus providing an accessible space of 25m3. The MSR has 87 openings up to 220mm diameter to operate the experimental apparatus inside, and an intermediate space between the layers for sensitive signal processing electronics. The characterization measurements show a remanent magnetic field in the central 1m3 below 100pT, and a field below 600pT in the entire inner volume, up to 4\,cm to the walls. The quasi-static shielding factor at 0.01\,Hz measured with a sinusoidal 2muT peak-to-peak signal is about 100,000 in all three spatial directions and rises fast with frequency to reach 10^8 above 1Hz.
△ Less
Submitted 21 June, 2022;
originally announced June 2022.
-
Integrated Pockels Laser
Authors:
Mingxiao Li,
Lin Chang,
Lue Wu,
Jeremy Staffa,
Jingwei Ling,
Usman A. Javid,
Yang He,
Raymond Lopez-rios,
Shixin Xue,
Theodore J. Morin,
Boqiang Shen,
Heming Wang,
Siwei Zeng,
Lin Zhu,
Kerry J. Vahala,
John E. Bowers,
Qiang Lin
Abstract:
The development of integrated semiconductor lasers has miniaturized traditional bulky laser systems, enabling a wide range of photonic applications. A progression from pure III-V based lasers to III-V/external cavity structures has harnessed low-loss waveguides in different material systems, leading to significant improvements in laser coherence and stability. Despite these successes, however, key…
▽ More
The development of integrated semiconductor lasers has miniaturized traditional bulky laser systems, enabling a wide range of photonic applications. A progression from pure III-V based lasers to III-V/external cavity structures has harnessed low-loss waveguides in different material systems, leading to significant improvements in laser coherence and stability. Despite these successes, however, key functions remain absent. In this work, we address a critical missing function by integrating the Pockels effect into a semiconductor laser. Using a hybrid integrated III-V/Lithium Niobate structure, we demonstrate several essential capabilities that have not existed in previous integrated lasers. These include a record-high frequency modulation speed of 2 exahertz/s (2.0$\times$10$^{18}$ Hz/s) and fast switching at 50 MHz, both of which are made possible by integration of the electro-optic effect. Moreover, the device co-lases at infrared and visible frequencies via the second-harmonic frequency conversion process, the first such integrated multi-color laser. Combined with its narrow linewidth and wide tunability, this new type of integrated laser holds promise for many applications including LiDAR, microwave photonics, atomic physics, and AR/VR.
△ Less
Submitted 26 April, 2022;
originally announced April 2022.
-
Improving the accuracy of hard photon emission by Sigmoid sampling of the QED-table in particle-in-cell-Monte-Carlo simulations
Authors:
Yinlong Guo,
Xuesong Geng,
Liangliang Ji,
Baifei Shen,
Ruxin Li
Abstract:
Research on laser-plasma interaction in the quantum-electrodynamic (QED) regime has been greatly advanced by particle-in-cell & Monte-Carlo simulations (PIC-MC). While these simulations are widely used, we find that noticeable numerical error arises due to inappropriate implementation of the quantum process accounting for hard photon emission and pair production in the PIC-MC codes. The error stem…
▽ More
Research on laser-plasma interaction in the quantum-electrodynamic (QED) regime has been greatly advanced by particle-in-cell & Monte-Carlo simulations (PIC-MC). While these simulations are widely used, we find that noticeable numerical error arises due to inappropriate implementation of the quantum process accounting for hard photon emission and pair production in the PIC-MC codes. The error stems from the low resolution of the QED table used to sample photon energy, which is generated in the logarithmic scale and cannot resolve high energy photons. We propose a new sampling method via Sigmoid function that handles both the low energy and high energy end of the photon emission spectrum. It guarantees the accuracy of PIC-MC algorithms for hard photon radiation and other related processes in the strong-field QED regime.
△ Less
Submitted 15 February, 2022;
originally announced February 2022.
-
Quasi-monochromatic bright gamma-ray generation from synchronized Compton scattering via azimuthal spatial-temporal coupling
Authors:
Xuesong Geng,
Liangliang Ji,
Baifei Shen
Abstract:
High energy photons can be generated via inverse Compton scattering (ICS) in the collision between energetic electrons and intense laser pulse. The development of laser plasma accelerators promises compact and all-optical gamma-ray sources by colliding the electrons from laser wakefield accelerators to its high-power driving pulse reflected by a plasma mirror. However, the law of optical focusing…
▽ More
High energy photons can be generated via inverse Compton scattering (ICS) in the collision between energetic electrons and intense laser pulse. The development of laser plasma accelerators promises compact and all-optical gamma-ray sources by colliding the electrons from laser wakefield accelerators to its high-power driving pulse reflected by a plasma mirror. However, the law of optical focusing hinders realization of both high photon yield and monochromatic spectrum in this scenario. We propose an azimuthal spatial-temporal convertor that decouples the focal field strength from laser spot size using helical parabolic geometry. It decomposes the driving laser beam into a pulse train of almost identical divergence angle and focal depth, creating synchronized ICS in the optimized linear regime. The scheme resolves the dilemma between high efficiency and narrow energy spread, facilitating the generation of monochromatic gamma-ray using high power lasers beyond relativistic field strengths.
△ Less
Submitted 15 February, 2022;
originally announced February 2022.
-
A Sequential Discontinuous Galerkin Method for Two-Phase Flow in Deformable Porous Media
Authors:
Boqian Shen,
Beatrice Riviere
Abstract:
We formulate a numerical method for solving the two-phase flow poroelasticity equations. The scheme employs the interior penalty discontinuous Galerkin method and a sequential time-stepping method. The unknowns are the phase pressures and the displacement. Existence of the solution is proved. Three-dimensional numerical results show the accuracy and robustness of the proposed method.
We formulate a numerical method for solving the two-phase flow poroelasticity equations. The scheme employs the interior penalty discontinuous Galerkin method and a sequential time-stepping method. The unknowns are the phase pressures and the displacement. Existence of the solution is proved. Three-dimensional numerical results show the accuracy and robustness of the proposed method.
△ Less
Submitted 21 January, 2022;
originally announced January 2022.
-
Biochemical pathways of forward/backward steps of motor protein kinesin-1
Authors:
Beibei Shen,
Yunxin Zhang
Abstract:
Kinesin-1 is an ATP-driven, two-headed motor protein that transports intracellular cargoes along microtubule. Based on recent experimental observations, we formulate a mechanochemical model for it, in which forward/backward/futile cycle of kinesin-1 can be realized through multiple biochemical pathways. Our results show that both forward and futile cycles consist of two biochemical pathways, while…
▽ More
Kinesin-1 is an ATP-driven, two-headed motor protein that transports intracellular cargoes along microtubule. Based on recent experimental observations, we formulate a mechanochemical model for it, in which forward/backward/futile cycle of kinesin-1 can be realized through multiple biochemical pathways. Our results show that both forward and futile cycles consist of two biochemical pathways, while backward cycle may be realized through six possible pathways. Backward motion of kinesin-1 is mainly through backward sliding along microtubule when it is in semi-detach state, and usually coupled with ATP hydrolysis. Under low external load, about 80\% of ATP is wasted by kinesin-1, and this proportion of waste is almost independent of ATP concentration. At high ATP concentration or under high external load, both heads of kinesin are always in ATP or ADP$\cdot$Pi binding state and bind to microtubule tightly. But at low ATP concentration and low load, kinesin mainly stays at the one head bound state. In contrast to mean run length, the mean run time of kinesin-1 along microtubule decreases with ATP concentration. Unless external load is near the stall force, the motion of kinesin-1 is almost deterministic, not as predicted by usual Browian ratchet models.
△ Less
Submitted 28 December, 2021;
originally announced December 2021.
-
Sub-milliwatt, widely-tunable coherent microcomb generation with feedback-free operation
Authors:
Haowen Shu,
Lin Chang,
Chenghao Lao,
Bitao Shen,
Weiqiang Xie,
Xuguang Zhang,
Ming Jin,
Yuansheng Tao,
Ruixuan Chen,
Zihan Tao,
Shaohua Yu,
Qi-Fan Yang,
Xingjun Wang,
John E. Bowers
Abstract:
Microcombs are revolutionizing optoelectronics by providing parallelized, mutually coherent wavelength channels for time-frequency metrology and information processing. To implement this essential function in integrated photonic systems, it is desirable to drive microcombs directly with an on-chip laser in a simple and flexible way. However, two major difficulties are preventing this goal: 1) gene…
▽ More
Microcombs are revolutionizing optoelectronics by providing parallelized, mutually coherent wavelength channels for time-frequency metrology and information processing. To implement this essential function in integrated photonic systems, it is desirable to drive microcombs directly with an on-chip laser in a simple and flexible way. However, two major difficulties are preventing this goal: 1) generating mode-locked comb states usually requires a significant amount of pump power and 2) the requirement to align laser and resonator frequency significantly complicates operation and limits the tunability of the comb lines. Here, we address these problems by using microresonators on an AlGaAs on-insulator platform to generate dark-pulse microcombs. This highly nonlinear platform dramatically relaxes fabrication requirements and leads to a record-low pump power of less than 1 mW for coherent comb generation. Dark-pulse microcombs facilitated by thermally-controlled avoided mode-crossings are accessed by direct DFB laser pumping. Without any feedback or control circuitries, the comb shows good coherence and stability. This approach also leads to an unprecedented wide chirping range of all the comb lines. Our work provides a route to realize power-efficient, simple and reconfigurable microcombs that can be seamlessly integrated with a wide range of photonic systems.
△ Less
Submitted 16 December, 2021;
originally announced December 2021.
-
Extending the spectrum of fully integrated photonics
Authors:
Minh Tran,
Chong Zhang,
Theodore Morin,
Lin Chang,
Sabyasachi Barik,
Zhiquan Yuan,
Woonghee Lee,
Glenn Kim,
Aditya Malik,
Zeyu Zhang,
Joel Guo,
Heming Wang,
Boqiang Shen,
Lue Wu,
Kerry Vahala,
John Bowers,
Tin Komljenovic,
Hyundai Park
Abstract:
Integrated photonics has profoundly impacted a wide range of technologies underpinning modern society. The ability to fabricate a complete optical system on a chip offers unrivalled scalability, weight, cost and power efficiency. Over the last decade, the progression from pure III-V materials platforms to silicon photonics has significantly broadened the scope of integrated photonics by combining…
▽ More
Integrated photonics has profoundly impacted a wide range of technologies underpinning modern society. The ability to fabricate a complete optical system on a chip offers unrivalled scalability, weight, cost and power efficiency. Over the last decade, the progression from pure III-V materials platforms to silicon photonics has significantly broadened the scope of integrated photonics by combining integrated lasers with the high-volume, advanced fabrication capabilities of the commercial electronics industry. Yet, despite remarkable manufacturing advantages, reliance on silicon-based waveguides currently limits the spectral window available to photonic integrated circuits (PICs). Here, we present a new generation of integrated photonics by directly uniting III-V materials with silicon nitride (SiN) waveguides on Si wafers. Using this technology, we present the first fully integrated PICs at wavelengths shorter than silicon's bandgap, demonstrating essential photonic building blocks including lasers, photodetectors, modulators and passives, all operating at sub-um wavelengths. Using this platform, we achieve unprecedented coherence and tunability in an integrated laser at short wavelength. Furthermore, by making use of this higher photon energy, we demonstrate superb high temperature performance and, for the first time, kHz-level fundamental linewidths at elevated temperatures. Given the many potential applications at short wavelengths, the success of this integration strategy unlocks a broad range of new integrated photonics applications.
△ Less
Submitted 9 December, 2021; v1 submitted 6 December, 2021;
originally announced December 2021.
-
Probing material absorption and optical nonlinearity of integrated photonic materials
Authors:
Maodong Gao,
Qi-Fan Yang,
Qing-Xin Ji,
Heming Wang,
Lue Wu,
Boqiang Shen,
Junqiu Liu,
Guanhao Huang,
Lin Chang,
Weiqiang Xie,
Su-Peng Yu,
Scott B. Papp,
John E. Bowers,
Tobias J. Kippenberg,
Kerry J. Vahala
Abstract:
Optical microresonators with high quality ($Q$) factors are essential to a wide range of integrated photonic devices. Steady efforts have been directed towards increasing microresonator $Q$ factors across a variety of platforms. With success in reducing microfabrication process-related optical loss as a limitation of $Q$, the ultimate attainable $Q$, as determined solely by the constituent microre…
▽ More
Optical microresonators with high quality ($Q$) factors are essential to a wide range of integrated photonic devices. Steady efforts have been directed towards increasing microresonator $Q$ factors across a variety of platforms. With success in reducing microfabrication process-related optical loss as a limitation of $Q$, the ultimate attainable $Q$, as determined solely by the constituent microresonator material absorption, has come into focus. Here, we report measurements of the material-limited $Q$ factors in several photonic material platforms. High-$Q$ microresonators are fabricated from thin films of SiO$_2$, Si$_3$N$_4$, Al$_{0.2}$Ga$_{0.8}$As and Ta$_2$O$_5$. By using cavity-enhanced photothermal spectroscopy, the material-limited $Q$ is determined. The method simultaneously measures the Kerr nonlinearity in each material and reveals how material nonlinearity and ultimate $Q$ vary in a complementary fashion across photonic materials. Besides guiding microresonator design and material development in four material platforms, the results help establish performance limits in future photonic integrated systems.
△ Less
Submitted 29 October, 2021;
originally announced November 2021.
-
Bridging microcombs and silicon photonic engines for optoelectronics systems
Authors:
Haowen Shu,
Lin Chang,
Yuansheng Tao,
Bitao Shen,
Weiqiang Xie,
Ming Jin,
Andrew Netherton,
Zihan Tao,
Xuguang Zhang,
Ruixuan Chen,
Bowen Bai,
Jun Qin,
Shaohua Yu,
Xingjun Wang,
John E. Bowers
Abstract:
Microcombs have sparked a surge of applications over the last decade, ranging from optical communications to metrology. Despite their diverse deployment, most microcomb-based systems rely on a tremendous amount of bulk equipment to fulfill their desired functions, which is rather complicated, expensive and power-consuming. On the other hand, foundry-based silicon photonics (SiPh) has had remarkabl…
▽ More
Microcombs have sparked a surge of applications over the last decade, ranging from optical communications to metrology. Despite their diverse deployment, most microcomb-based systems rely on a tremendous amount of bulk equipment to fulfill their desired functions, which is rather complicated, expensive and power-consuming. On the other hand, foundry-based silicon photonics (SiPh) has had remarkable success in providing versatile functionality in a scalable and low-cost manner, but its available chip-based light sources lack the capacity for parallelization, which limits the scope of SiPh applications. Here, we bridge these two technologies by using a power-efficient and operationally-simple AlGaAs on insulator microcomb source to drive CMOS SiPh engines. We present two important chip-scale photonic systems for optical data transmissions and microwave photonics respectively: The first microcomb-based integrated photonic data link is demonstrated, based on a pulse-amplitude 4-level modulation scheme with 2 Tbps aggregate rate, and a highly reconfigurable microwave photonic filter with unprecedented integration level is constructed, using a time stretch scheme. Such synergy of microcomb and SiPh integrated components is an essential step towards the next generation of fully integrated photonic systems.
△ Less
Submitted 25 October, 2021;
originally announced October 2021.
-
Synergistic Energy Absorption Mechanisms of Architected Liquid Crystal Elastomers
Authors:
Seung-Yeol Jeon,
Beijun Shen,
Nicholas A. Traugutt,
Zeyu Zhu,
Lichen Fang,
Christopher M. Yakacki,
Thao D. Nguyen,
Sung Hoon Kang
Abstract:
Here, we report the rate-dependent energy absorption behavior of a liquid crystal elastomer (LCE)-based architected material consisting of repeating unit cells of bistable tilted LCE beams sandwiched between stiff supports. Viscoelastic behaviors of the LCE material cause the energy absorption to increase with strain rate according to a power-law relationship, which can be modulated by changing th…
▽ More
Here, we report the rate-dependent energy absorption behavior of a liquid crystal elastomer (LCE)-based architected material consisting of repeating unit cells of bistable tilted LCE beams sandwiched between stiff supports. Viscoelastic behaviors of the LCE material cause the energy absorption to increase with strain rate according to a power-law relationship, which can be modulated by changing the degree of mesogens alignment during synthesis. For a strain rate of 600 s-1, the unit cell structure shows up to a 5 MJ/m3 energy absorption density, which is two orders of magnitude higher than the same structure fabricated from Polydimethylsiloxane (PDMS), and is comparable to the dissipation from irreversible plastic deformation exhibited by denser metals. For a stacked structure of unit cells, viscoelasticity also produces nonuniform buckling of the LCE beams, causing the energy absorption density to increase with the stacking number n up to n=3. Varying the beam geometry further promotes the nonuniform buckling behavior allowing the energy absorption density to increase with stacking number without bounds. We envision that our study can lead to the development of lightweight extreme energy-absorbing materials.
△ Less
Submitted 14 October, 2021;
originally announced October 2021.
-
CoSyR: a novel beam dynamics code for the modeling of synchrotron radiation effects
Authors:
C. -K. Huang,
F. -Y. Li,
H. N. Rakotoarivelo,
B. Shen,
J. Domine,
B. Carlsten,
G. Dilts,
R. Garimella,
T. Kwan,
R. Robey
Abstract:
The self-consistent nonlinear dynamics of a relativistic charged particle beam interacting with its complete self-fields is a fundamental problem underpinning many of the accelerator design issues in high brightness beam applications, as well as the development of advanced accelerators. Particularly, synchrotron radiation induced effects in a magnetic dispersive beamline element can lead to collec…
▽ More
The self-consistent nonlinear dynamics of a relativistic charged particle beam interacting with its complete self-fields is a fundamental problem underpinning many of the accelerator design issues in high brightness beam applications, as well as the development of advanced accelerators. Particularly, synchrotron radiation induced effects in a magnetic dispersive beamline element can lead to collective beam instabilities and emittance growth. A novel beam dynamic code is developed based on a Lagrangian method for the calculation of the particles' radiation near-fields using wavefront/wavelet meshes via the Green's function of the Maxwell equations. These fields are then interpolated onto a moving mesh for dynamic update of the beam. This method allows radiation co-propagation and self-consistent interaction with the beam in the simulation at greatly reduced numerical errors. Multiple levels of parallelisms are inherent in this method and implemented in our code CoSyR to enable at-scale simulations of nonlinear beam dynamics on modern computing platforms using MPI, multi-threading, and GPUs. CoSyR has been used to evaluate the transverse and longitudinal coherent radiation effects on the beam and to investigate beam optics designs proposed for mitigation of beam brightness degradation in a magnetic bunch compressor. In this paper, the design of CoSyR, as well as the benchmark with other coherent synchrotron radiation models, are described and discussed.
△ Less
Submitted 30 September, 2021;
originally announced September 2021.
-
Scenario adaptive disruption prediction study for next generation burning-plasma tokamaks
Authors:
J. Zhu,
C. Rea,
R. S. Granetz,
E. S. Marmar,
K. J. Montes,
R. Sweeney,
R. A. Tinguely,
D. L. Chen,
B. Shen,
B. J. Xiao,
D. Humphreys,
J. Barr,
O. Meneghini
Abstract:
Next generation high performance (HP) tokamaks risk damage from unmitigated disruptions at high current and power. Achieving reliable disruption prediction for a device's HP operation based on its low performance (LP) data is key to success. In this letter, through explorative data analysis and dedicated numerical experiments on multiple existing tokamaks, we demonstrate how the operational regime…
▽ More
Next generation high performance (HP) tokamaks risk damage from unmitigated disruptions at high current and power. Achieving reliable disruption prediction for a device's HP operation based on its low performance (LP) data is key to success. In this letter, through explorative data analysis and dedicated numerical experiments on multiple existing tokamaks, we demonstrate how the operational regimes of tokamaks can affect the power of a trained disruption predictor. First, our results suggest data-driven disruption predictors trained on abundant LP discharges work poorly on the HP regime of the same tokamak, which is a consequence of the distinct distributions of the tightly correlated signals related to disruptions in these two regimes. Second, we find that matching operational parameters among tokamaks strongly improves cross-machine accuracy which implies our model learns from the underlying scalings of dimensionless physics parameters like q_{95}, β_{p} and confirms the importance of these parameters in disruption physics and cross machine domain matching from the data-driven perspective. Finally, our results show how in the absence of HP data from the target devices, the best predictivity of the HP regime for the target machine can be achieved by combining LP data from the target with HP data from other machines. These results provide a possible disruption predictor development strategy for next generation tokamaks, such as ITER and SPARC, and highlight the importance of developing on existing machines baseline scenario discharges of future tokamaks to collect more relevant disruptive data.
△ Less
Submitted 18 September, 2021;
originally announced September 2021.
-
Photon polarization effects in polarized electron-positron pair production in a strong laser field
Authors:
Ya-Nan Dai,
Bai-Fei Shen,
Jian-Xing Li,
Rashid Shaisultanov,
Karen Z. Hatsagortsyan,
Christoph H. Keitel,
Yue-Yue Chen
Abstract:
Deep understanding of photon polarization impact on pair production is essential for the efficient creation of laser driven polarized positron beams, and demands a complete description of polarization effects in strong-field QED processes. We investigate, employing fully polarization resolved Monte Carlo simulations, the correlated photon and electron (positron) polarization effects in multiphoton…
▽ More
Deep understanding of photon polarization impact on pair production is essential for the efficient creation of laser driven polarized positron beams, and demands a complete description of polarization effects in strong-field QED processes. We investigate, employing fully polarization resolved Monte Carlo simulations, the correlated photon and electron (positron) polarization effects in multiphoton Breit-Wheeler pair production process during the interaction of an ultrarelativistic electron beam with a counterpropagating elliptically polarized laser pulse. We showed that the polarization of e^-e^+ pairs is degraded by 35\%, when the polarization of the intermediate photon is resolved, accompanied with an approximately 13\% decrease of the pair yield. Moreover, the polarization direction of energetic positrons in small angle region is reversed, which originates from the pair production of hard photons with polarization parallel with electric field.
△ Less
Submitted 11 July, 2021;
originally announced July 2021.
-
Silicon Nitride External Cavity Laser with Alignment Tolerant Multi-Mode RSOA-to-PIC Interface
Authors:
Ibrahim Ghannam,
Bin Shen,
Florian Merget,
Jeremy Witzens
Abstract:
We demonstrate an external cavity laser formed by combining a silicon nitride photonic integrated circuit with a reflective semiconductor optical amplifier. The laser uses an alignment tolerant edge coupler formed by a multi-mode waveguide splitter right at the edge of the silicon nitride chip that relaxes the required alignment to the III-V gain chip and equally splits the power among its two out…
▽ More
We demonstrate an external cavity laser formed by combining a silicon nitride photonic integrated circuit with a reflective semiconductor optical amplifier. The laser uses an alignment tolerant edge coupler formed by a multi-mode waveguide splitter right at the edge of the silicon nitride chip that relaxes the required alignment to the III-V gain chip and equally splits the power among its two output waveguides. Both the ground and first order mode are excited in the coupler and reach the quadrature condition at the waveguide junction, ensuring equal power to be coupled to both. Two high-quality-factor ring resonators arranged in Vernier configuration close a Sagnac loop between the two waveguides. In addition to wideband frequency tuning, they result in a longer effective cavity length. The alignment tolerant coupler increases the alignment tolerance in the two directions parallel to the chip surface by a factor 3 relative to conventional edge couplers, making it ideal for gain chip integration via pick-and-place technology. Lasing is maintained in a misalignment range of $\pm$6 $μ$m in the direction along the edge of the chip. A Lorentzian laser linewidth of 42 kHz is achieved.
△ Less
Submitted 1 July, 2021;
originally announced July 2021.
-
High-performance lasers for fully integrated silicon nitride photonics
Authors:
Chao Xiang,
Joel Guo,
Warren Jin,
Jonathan Peters,
Weiqiang Xie,
Lin Chang,
Boqiang Shen,
Heming Wang,
Qi-Fan Yang,
Lue Wu,
David Kinghorn,
Mario Paniccia,
Kerry J. Vahala,
Paul A. Morton,
John E. Bowers
Abstract:
Silicon nitride (SiN) waveguides with ultra-low optical loss enable integrated photonic applications including low noise, narrow linewidth lasers, chip-scale nonlinear photonics, and microwave photonics. Lasers are key components to SiN photonic integrated circuits (PICs), but are difficult to fully integrate with low-index SiN waveguides due to their large mismatch with the high-index III-V gain…
▽ More
Silicon nitride (SiN) waveguides with ultra-low optical loss enable integrated photonic applications including low noise, narrow linewidth lasers, chip-scale nonlinear photonics, and microwave photonics. Lasers are key components to SiN photonic integrated circuits (PICs), but are difficult to fully integrate with low-index SiN waveguides due to their large mismatch with the high-index III-V gain materials. The recent demonstration of multilayer heterogeneous integration provides a practical solution and enabled the first-generation of lasers fully integrated with SiN waveguides. However a laser with high device yield and high output power at telecommunication wavelengths, where photonics applications are clustered, is still missing, hindered by large mode transition loss, nonoptimized cavity design, and a complicated fabrication process. Here, we report high-performance lasers on SiN with tens of milliwatts output through the SiN waveguide and sub-kHz fundamental linewidth, addressing all of the aforementioned issues. We also show Hertz-level linewidth lasers are achievable with the developed integration techniques. These lasers, together with high-$Q$ SiN resonators, mark a milestone towards a fully-integrated low-noise silicon nitride photonics platform. This laser should find potential applications in LIDAR, microwave photonics and coherent optical communications.
△ Less
Submitted 16 April, 2021;
originally announced April 2021.
-
Influence of Micro-turbulence on Neoclassical Tearing Mode Onset
Authors:
Tonghui Shi,
L. Wei,
H. H. Wang,
E. Li,
B. Shen,
J. P. Qian,
Y. M. Wang,
T. Zhang,
H. L. Zhao,
L. Zeng,
Y. Zhang,
H. Q. Liu,
Q. Ma,
D. L. Chen,
Z. P. Luo,
Y. Y. Li,
Z. C. Shen,
L. Q. Xu,
B. Zhang,
M. H. Li,
Z. X. Wang,
B. L. Ling,
X. Z. Gong,
Y. Sun,
B. Wan
Abstract:
Direct evidence of micro-turbulence effect on the onset of neoclassical tearing mode (NTM) is reported for the first time in this letter. A puzzling positive correlation between critical width of seed island of NTM and normalized plasma pressure beta_p is first observed employing a novel method for clearly separating the processes of seed island and the onset of NTM in the EAST tokamak. Different…
▽ More
Direct evidence of micro-turbulence effect on the onset of neoclassical tearing mode (NTM) is reported for the first time in this letter. A puzzling positive correlation between critical width of seed island of NTM and normalized plasma pressure beta_p is first observed employing a novel method for clearly separating the processes of seed island and the onset of NTM in the EAST tokamak. Different from the methods developed before, the width of the seed island is well controlled by slowly ramping up the current in resonant magnetic perturbation coils. It is revealed that the positive correlation is mainly attributed to the enhancement of perpendicular transport by micro-turbulence, which overcomes the destabilizing effect of beta_p on the onset of NTM. Reduced magnetohydrodynamics (MHD) modeling well reproduced the two states of nonlinear bifurcations observed in this experiment by including the finite transport effect. This result provides a new route for understanding multi-scale interaction in plasma physics.
△ Less
Submitted 29 March, 2021;
originally announced March 2021.
-
Self-regulating soliton domain walls in microresonators
Authors:
Heming Wang,
Boqiang Shen,
Yan Yu,
Zhiquan Yuan,
Chengying Bao,
Warren Jin,
Lin Chang,
Mark A. Leal,
Avi Feshali,
Mario Paniccia,
John E. Bowers,
Kerry Vahala
Abstract:
Dissipative soliton Kerr frequency combs in microresonators have recently been demonstrated with the self-injection locking process. They have the advantage of turnkey deterministic comb generation and simplifying dark soliton generation in the normal dispersion regime. Here, the formation process of dark pulses triggered by self-injection locking is studied by regarding them as a pair of domain w…
▽ More
Dissipative soliton Kerr frequency combs in microresonators have recently been demonstrated with the self-injection locking process. They have the advantage of turnkey deterministic comb generation and simplifying dark soliton generation in the normal dispersion regime. Here, the formation process of dark pulses triggered by self-injection locking is studied by regarding them as a pair of domain walls that connect domains having different intracavity powers. The self-injection locking mechanism allows the domain walls to self-regulate their position so that a wide range of dark comb states can be accessed, and the duty cycle is controlled by the feedback phase. Direct imaging of the dark pulse shape using the electro-optic sampling technique is used to verify the theory. The results provide new physical insights as well as a new operational modality for this important class of nonlinear waves.
△ Less
Submitted 24 November, 2021; v1 submitted 18 March, 2021;
originally announced March 2021.
-
Beam focus and longitudinal polarization influence on spin dynamics in the Kapitza-Dirac effect
Authors:
Sven Ahrens,
Ziling Guan,
Baifei Shen
Abstract:
We theoretically investigate the influence of a longitudinal laser polarization component from beam focusing on spin dynamics in Kapitza-Dirac scattering by solving the relativistic Dirac equation with time-dependent perturbation theory. The transverse spacial dependence of the longitudinal beam polarization component is accounted for, by approximating a Gaussian beam with plane-wave components. W…
▽ More
We theoretically investigate the influence of a longitudinal laser polarization component from beam focusing on spin dynamics in Kapitza-Dirac scattering by solving the relativistic Dirac equation with time-dependent perturbation theory. The transverse spacial dependence of the longitudinal beam polarization component is accounted for, by approximating a Gaussian beam with plane-wave components. We find that corrections from a longitudinal laser beam polarization component approximately scale with the second power of the diffraction angle $ε$, from which we conclude that a related influence from beam focusing can be made negligibly small for sufficiently low beam foci.
△ Less
Submitted 1 June, 2022; v1 submitted 12 March, 2021;
originally announced March 2021.
-
Johnson-Nyquist Noise Effects in Neutron Electric-Dipole-Moment Experiments
Authors:
N. J. Ayres,
G. Ban,
G. Bison,
K. Bodek,
V. Bondar,
P. -J. Chiu,
B. Clement,
C. B. Crawford,
M. Daum,
S. Emmenegger,
M. Fertl,
A. Fratangelo,
W. C. Griffith,
Z. D. Grujić,
P. G. Harris,
K. Kirch,
P. A. Koss,
B. Lauss,
T. Lefort,
P. Mohanmurthy,
O. Naviliat-Cuncic,
D. Pais,
F. M. Piegsa,
G. Pignol,
D. Rebreyend
, et al. (15 additional authors not shown)
Abstract:
Magnetic Johnson-Nyquist noise (JNN) originating from metal electrodes, used to create a static electric field in neutron electric-dipole-moment (nEDM) experiments, may limit the sensitivity of measurements. We present here the first dedicated study on JNN applied to a large-scale long-measurement-time experiment with the implementation of a co-magnetometry. In this study, we derive surface- and v…
▽ More
Magnetic Johnson-Nyquist noise (JNN) originating from metal electrodes, used to create a static electric field in neutron electric-dipole-moment (nEDM) experiments, may limit the sensitivity of measurements. We present here the first dedicated study on JNN applied to a large-scale long-measurement-time experiment with the implementation of a co-magnetometry. In this study, we derive surface- and volume-averaged root-mean-square normal noise amplitudes at a certain frequency bandwidth for a cylindrical geometry. In addition, we model the source of noise as a finite number of current dipoles and demonstrate a method to simulate temporal and three-dimensional spatial dependencies of JNN. The calculations are applied to estimate the impact of JNN on measurements with the new apparatus, n2EDM, at the Paul Scherrer Institute. We demonstrate that the performances of the optically pumped $^{133}$Cs magnetometers and $^{199}$Hg co-magnetometers, which will be used in the apparatus, are not limited by JNN. Further, we find that in measurements deploying a co-magnetometer system, the impact of JNN is negligible for nEDM searches down to a sensitivity of $4\,\times\,10^{-28}\,e\cdot{\rm cm}$ in a single measurement; therefore, the use of economically and mechanically favored solid aluminum electrodes is possible.
△ Less
Submitted 9 July, 2021; v1 submitted 2 February, 2021;
originally announced February 2021.
-
The design of the n2EDM experiment
Authors:
N. J. Ayres,
G. Ban,
L. Bienstman,
G. Bison,
K. Bodek,
V. Bondar,
T. Bouillaud,
E. Chanel,
J. Chen,
P. -J. Chiu,
B. Clément,
C. Crawford,
M. Daum,
B. Dechenaux,
C. B. Doorenbos,
S. Emmenegger,
L. Ferraris-Bouchez,
M. Fertl,
A. Fratangelo,
P. Flaux,
D. Goupillière,
W. C. Griffith,
Z. D. Grujic,
P. G. Harris,
K. Kirch
, et al. (36 additional authors not shown)
Abstract:
We present the design of a next-generation experiment, n2EDM, currently under construction at the ultracold neutron source at the Paul Scherrer Institute (PSI) with the aim of carrying out a high-precision search for an electric dipole moment of the neutron. The project builds on experience gained with the previous apparatus operated at PSI until 2017, and is expected to deliver an order of magnit…
▽ More
We present the design of a next-generation experiment, n2EDM, currently under construction at the ultracold neutron source at the Paul Scherrer Institute (PSI) with the aim of carrying out a high-precision search for an electric dipole moment of the neutron. The project builds on experience gained with the previous apparatus operated at PSI until 2017, and is expected to deliver an order of magnitude better sensitivity with provision for further substantial improvements. An overview is given of the experimental method and setup, the sensitivity requirements for the apparatus are derived, and its technical design is described.
△ Less
Submitted 22 January, 2021; v1 submitted 21 January, 2021;
originally announced January 2021.
-
Correlated self-heterodyne method for ultra-low-noise laser linewidth measurements
Authors:
Zhiquan Yuan,
Heming Wang,
Peng Liu,
Bohan Li,
Boqiang Shen,
Maodong Gao,
Lin Chang,
Warren Jin,
Avi Feshali,
Mario Paniccia,
John Bowers,
Kerry Vahala
Abstract:
Narrow-linewidth lasers are important to many applications spanning precision metrology to sensing systems. Characterization of these lasers requires precise measurements of their frequency noise spectra. Here we demonstrate a correlated self-heterodyne (COSH) method capable of measuring frequency noise as low as 0.01 Hz$^2$/Hz at 1 MHz offset frequency. The measurement setup is characterized by b…
▽ More
Narrow-linewidth lasers are important to many applications spanning precision metrology to sensing systems. Characterization of these lasers requires precise measurements of their frequency noise spectra. Here we demonstrate a correlated self-heterodyne (COSH) method capable of measuring frequency noise as low as 0.01 Hz$^2$/Hz at 1 MHz offset frequency. The measurement setup is characterized by both commercial and lab-built lasers, and features low optical power requirements, fast acquisition time and high intensity noise rejection.
△ Less
Submitted 16 June, 2022; v1 submitted 19 October, 2020;
originally announced October 2020.
-
Hertz-linewidth semiconductor lasers using CMOS-ready ultra-high-$Q$ microresonators
Authors:
Warren Jin,
Qi-Fan Yang,
Lin Chang,
Boqiang Shen,
Heming Wang,
Mark A. Leal,
Lue Wu,
Avi Feshali,
Mario Paniccia,
Kerry J. Vahala,
John E. Bowers
Abstract:
Driven by narrow-linewidth bench-top lasers, coherent optical systems spanning optical communications, metrology and sensing provide unrivalled performance. To transfer these capabilities from the laboratory to the real world, a key missing ingredient is a mass-produced integrated laser with superior coherence. Here, we bridge conventional semiconductor lasers and coherent optical systems using CM…
▽ More
Driven by narrow-linewidth bench-top lasers, coherent optical systems spanning optical communications, metrology and sensing provide unrivalled performance. To transfer these capabilities from the laboratory to the real world, a key missing ingredient is a mass-produced integrated laser with superior coherence. Here, we bridge conventional semiconductor lasers and coherent optical systems using CMOS-foundry-fabricated microresonators with record high $Q$ factor over 260 million and finesse over 42,000. Five orders-of-magnitude noise reduction in the pump laser is demonstrated, and for the first time, fundamental noise below 1 Hz$^2$ Hz$^{-1}$ is achieved in an electrically-pumped integrated laser. Moreover, the same configuration is shown to relieve dispersion requirements for microcomb generation that have handicapped certain nonlinear platforms. The simultaneous realization of record-high $Q$ factor, highly coherent lasers and frequency combs using foundry-based technologies paves the way for volume manufacturing of a wide range of coherent optical systems.
△ Less
Submitted 15 September, 2020;
originally announced September 2020.
-
Axionlike-particle generation by laser-plasma interaction
Authors:
Shan Huang,
Baifei Shen,
Zhigang Bu,
Xiaomei Zhang,
Liangliang Ji,
Shuhua Zhai
Abstract:
The hypothetical axion and axion-like particles, feebly coupled with photon, have not yet been found in any experiment. With the improvement of laser technique, much stronger but shorter quasi-static electric and magnetic fields can be created in laboratory using laser-plasma interaction, compared to the fields of large magnets, to help the search of axion. In this article, we discuss the feasibil…
▽ More
The hypothetical axion and axion-like particles, feebly coupled with photon, have not yet been found in any experiment. With the improvement of laser technique, much stronger but shorter quasi-static electric and magnetic fields can be created in laboratory using laser-plasma interaction, compared to the fields of large magnets, to help the search of axion. In this article, we discuss the feasibility of ALPs exploration using planarly or cylindrically symmetric laser-plasma fields as background and an x-ray free-electron laser as probe. Both the probe and the background fields are polarized such that the existence of ALPs in the corresponding parameter space will cause polarization rotation of the probe, which can be detected with high accuracy. Besides, a structured field in the plasma creates a tunable transverse profile for the interaction and improves the signal-to-noise ratio via phase-matching mechanism. The ALP mass discussed in this article ranges from $10^{-3}$ eV to 1 keV. Some simple schemes and estimations on ALP production and polarization rotation of probe photon are given, which reveals the possibility of future laser-plasma ALP source in laboratory.
△ Less
Submitted 5 September, 2022; v1 submitted 6 May, 2020;
originally announced May 2020.
-
A spin-filter for polarized electron acceleration in plasma wakefields
Authors:
Yitong Wu,
Liangliang Ji,
Xuesong Geng,
Johannes Thomas,
Markus Büscher,
Alexander Pukhov,
Anna Hützen,
Lingang Zhang,
Baifei Shen,
Ruxin Li
Abstract:
We propose a filter method to generate electron beams of high polarization from bubble and blow-out wakefield accelerators. The mechanism is based on the idea to identify all electron-beam subsets with low-polarization and to filter them out by an X-shaped slit placed right behind the plasma accelerator. To find these subsets we investigate the dependence between the initial azimuthal angle and th…
▽ More
We propose a filter method to generate electron beams of high polarization from bubble and blow-out wakefield accelerators. The mechanism is based on the idea to identify all electron-beam subsets with low-polarization and to filter them out by an X-shaped slit placed right behind the plasma accelerator. To find these subsets we investigate the dependence between the initial azimuthal angle and the spin of single electrons during the trapping process. This dependence shows that transverse electron spins preserve their orientation during injection if they are initially aligned parallel or anti-parallel to the local magnetic field. We derive a precise correlation of the local beam polarization as a function of the coordinate and the electron phase angle. Three-dimensional particle-in-cell simulations, incorporating classical spin dynamics, show that the beam polarization can be increased from 35% to about 80% after spin filtering. The injected flux is strongly restricted to preserve the beam polarization, e.g. <1kA in Ref.[27]. This limitation is removed by employing the proposed filter mechanism. The robust of the method is discussed that contains drive beam fluctuations, jitters, the thickness of the filter and initial temperature. This idea marks an efficient and simple strategy to generate energetic polarized electron beams based on wakefield acceleration
△ Less
Submitted 6 April, 2020;
originally announced April 2020.