Showing 1–28 of 28 results for author: Tsang, T

H-infinity Optimization for Active Seismic Isolation Systems in Gravitational-Wave Detectors

Authors: Terrence Tsang, Fabián Erasmo Peña Arellano, Takafumi Ushiba, Ryutaro Takahashi, Yoichi Aso, Katherine Dooley

Abstract: Low-frequency seismic noise poses a significant challenge in gravitational-wave detectors, prompting the use of active seismic isolation systems. These systems employ advanced control configurations, including feedback control, sensor correction, and sensor fusion, to mitigate seismic disturbances. Optimal performance of these systems is achieved through the application of the H-infinity method, w… ▽ More Low-frequency seismic noise poses a significant challenge in gravitational-wave detectors, prompting the use of active seismic isolation systems. These systems employ advanced control configurations, including feedback control, sensor correction, and sensor fusion, to mitigate seismic disturbances. Optimal performance of these systems is achieved through the application of the H-infinity method, which optimizes control filters. The H-infinity method was employed to optimize a sensor correction filter and complementary filters for sensor fusion for a KAGRA Type-B suspension, resulting in the development of an instrumentation-optimal ``super sensor''. The super sensor exhibits comparable overall displacement noise RMS performance to a relative sensor, yet offers significantly better band-limited RMS performance around the secondary microseism frequency, making it highly robust to seismic noise. This highlights the efficacy of the H-infinity method in generating seismic isolation filters tailored to instrument limitations, thereby transforming the system into a fully functional active seismic isolation system. △ Less

Submitted 22 July, 2024; originally announced July 2024.

Imaging of single barium atoms in a second matrix site in solid xenon for barium tagging in a $^{136}$Xe double beta decay experiment

Authors: M. Yvaine, D. Fairbank, J. Soderstrom, C. Taylor, J. Stanley, T. Walton, C. Chambers, A. Iverson, W. Fairbank, S. Al Kharusi, A. Amy, E. Angelico, A. Anker, I. J. Arnquist, A. Atencio, J. Bane, V. Belov, E. P. Bernard, T. Bhatta, A. Bolotnikov, J. Breslin, P. A. Breur, J. P. Brodsky, E. Brown, T. Brunner , et al. (112 additional authors not shown)

Abstract: Neutrinoless double beta decay is one of the most sensitive probes for new physics beyond the Standard Model of particle physics. One of the isotopes under investigation is $^{136}$Xe, which would double beta decay into $^{136}$Ba. Detecting the single $^{136}$Ba daughter provides a sort of ultimate tool in the discrimination against backgrounds. Previous work demonstrated the ability to perform s… ▽ More Neutrinoless double beta decay is one of the most sensitive probes for new physics beyond the Standard Model of particle physics. One of the isotopes under investigation is $^{136}$Xe, which would double beta decay into $^{136}$Ba. Detecting the single $^{136}$Ba daughter provides a sort of ultimate tool in the discrimination against backgrounds. Previous work demonstrated the ability to perform single atom imaging of Ba atoms in a single-vacancy site of a solid xenon matrix. In this paper, the effort to identify signal from individual barium atoms is extended to Ba atoms in a hexa-vacancy site in the matrix and is achieved despite increased photobleaching in this site. Abrupt fluorescence turn-off of a single Ba atom is also observed. Significant recovery of fluorescence signal lost through photobleaching is demonstrated upon annealing of Ba deposits in the Xe ice. Following annealing, it is observed that Ba atoms in the hexa-vacancy site exhibit antibleaching while Ba atoms in the tetra-vacancy site exhibit bleaching. This may be evidence for a matrix site transfer upon laser excitation. Our findings offer a path of continued research toward tagging of Ba daughters in all significant sites in solid xenon. △ Less

Submitted 28 June, 2024; originally announced July 2024.

Comments: 9 pages, 8 figures

UV hybrid photon detector based on GaN photocathodes and Si low gain avalanche diode

Authors: Mohamed Boukhicha, Thomas Y. Tsang, Gabriele Giacomini, Amir M. Dabiran, Luca Cultrera

Abstract: Photon detectors featuring single-photon sensitivity play a crucial role in various scientific domains, including high-energy physics, astronomy, and quantum optics. Fast response time, high quantum efficiency, and minimal dark counts are the characteristics that render them ideal candidates for detecting individual photons with exceptional signal-to-noise ratios, at frequencies in the the range o… ▽ More Photon detectors featuring single-photon sensitivity play a crucial role in various scientific domains, including high-energy physics, astronomy, and quantum optics. Fast response time, high quantum efficiency, and minimal dark counts are the characteristics that render them ideal candidates for detecting individual photons with exceptional signal-to-noise ratios, at frequencies in the the range of hundreds of MHz. Here, we report on our first design and operational results on a Hybrid Photon Detector (HPD) that combines the high quantum efficiency of a Gallium Nitride (GaN) photocathode and the low noise characteristics of a Si-based Low-Gain Avalanche Diode (LGAD). This hybrid detection scheme has the potential to reach single-photon detection sensitivity with high quantum efficiency, low noise levels and capable of operating at hundreds of MHz repetition rates. △ Less

Submitted 25 June, 2024; originally announced June 2024.

An integrated online radioassay data storage and analytics tool for nEXO

Authors: R. H. M. Tsang, A. Piepke, S. Al Kharusi, E. Angelico, I. J. Arnquist, A. Atencio, I. Badhrees, J. Bane, V. Belov, E. P. Bernard, A. Bhat, T. Bhatta, A. Bolotnikov, P. A. Breur, J. P. Brodsky, E. Brown, T. Brunner, E. Caden, G. F. Cao, L. Q. Cao, D. Cesmecioglu, C. Chambers, E. Chambers, B. Chana, S. A. Charlebois , et al. (135 additional authors not shown)

Abstract: Large-scale low-background detectors are increasingly used in rare-event searches as experimental collaborations push for enhanced sensitivity. However, building such detectors, in practice, creates an abundance of radioassay data especially during the conceptual phase of an experiment when hundreds of materials are screened for radiopurity. A tool is needed to manage and make use of the radioassa… ▽ More Large-scale low-background detectors are increasingly used in rare-event searches as experimental collaborations push for enhanced sensitivity. However, building such detectors, in practice, creates an abundance of radioassay data especially during the conceptual phase of an experiment when hundreds of materials are screened for radiopurity. A tool is needed to manage and make use of the radioassay screening data to quantitatively assess detector design options. We have developed a Materials Database Application for the nEXO experiment to serve this purpose. This paper describes this database, explains how it functions, and discusses how it streamlines the design of the experiment. △ Less

Submitted 20 June, 2023; v1 submitted 12 April, 2023; originally announced April 2023.

Characterizing human collective behaviours of COVID-19 in Hong Kong

Authors: Zhanwei Du, Xiao Zhang, Lin Wang, Sidan Yao, Yuan Bai, Qi Tan, Xiaoke Xu, Sen Pei, Jingyi Xiao, Tim K. Tsang, Qiuyan Liao, Eric Lau, Peng Wu, Chao Gao, Benjamin J Cowling

Abstract: People are likely to engage in collective behaviour online during extreme events, such as the COVID-19 crisis, to express their awareness, actions and concerns. Hong Kong has implemented stringent public health and social measures (PHSMs) to curb COVID-19 epidemic waves since the first COVID-19 case was confirmed on 22 January 2020. People are likely to engage in collective behaviour online during… ▽ More People are likely to engage in collective behaviour online during extreme events, such as the COVID-19 crisis, to express their awareness, actions and concerns. Hong Kong has implemented stringent public health and social measures (PHSMs) to curb COVID-19 epidemic waves since the first COVID-19 case was confirmed on 22 January 2020. People are likely to engage in collective behaviour online during extreme events, such as the COVID-19 crisis, to express their awareness, actions and concerns. Here, we offer a framework to evaluate interactions among individuals emotions, perception, and online behaviours in Hong Kong during the first two waves (February to June 2020) and found a strong correlation between online behaviours of Google search and the real-time reproduction numbers. To validate the model output of risk perception, we conducted 10 rounds of cross-sectional telephone surveys from February 1 through June 20 in 2020 to quantify risk perception levels over time. Compared with the survey results, the estimates of the risk perception of individuals using our network-based mechanistic model capture 80% of the trend of people risk perception (individuals who worried about being infected) during the studied period. We may need to reinvigorate the public by engaging people as part of the solution to live their lives with reduced risk. △ Less

Submitted 10 December, 2022; originally announced December 2022.

Input optics systems of the KAGRA detector during O3GK

Authors: T. Akutsu, M. Ando, K. Arai, Y. Arai, S. Araki, A. Araya, N. Aritomi, H. Asada, Y. Aso, S. Bae, Y. Bae, L. Baiotti, R. Bajpai, M. A. Barton, K. Cannon, Z. Cao, E. Capocasa, M. Chan, C. Chen, K. Chen, Y. Chen, C-I. Chiang, H. Chu, Y-K. Chu, S. Eguchi , et al. (228 additional authors not shown)

Abstract: KAGRA, the underground and cryogenic gravitational-wave detector, was operated for its solo observation from February 25th to March 10th, 2020, and its first joint observation with the GEO 600 detector from April 7th -- 21st, 2020 (O3GK). This study presents an overview of the input optics systems of the KAGRA detector, which consist of various optical systems, such as a laser source, its intensit… ▽ More KAGRA, the underground and cryogenic gravitational-wave detector, was operated for its solo observation from February 25th to March 10th, 2020, and its first joint observation with the GEO 600 detector from April 7th -- 21st, 2020 (O3GK). This study presents an overview of the input optics systems of the KAGRA detector, which consist of various optical systems, such as a laser source, its intensity and frequency stabilization systems, modulators, a Faraday isolator, mode-matching telescopes, and a high-power beam dump. These optics were successfully delivered to the KAGRA interferometer and operated stably during the observations. The laser frequency noise was observed to limit the detector sensitivity above a few kHz, whereas the laser intensity did not significantly limit the detector sensitivity. △ Less

Submitted 12 October, 2022; originally announced October 2022.

Performance of novel VUV-sensitive Silicon Photo-Multipliers for nEXO

Authors: G. Gallina, Y. Guan, F. Retiere, G. Cao, A. Bolotnikov, I. Kotov, S. Rescia, A. K. Soma, T. Tsang, L. Darroch, T. Brunner, J. Bolster, J. R. Cohen, T. Pinto Franco, W. C. Gillis, H. Peltz Smalley, S. Thibado, A. Pocar, A. Bhat, A. Jamil, D. C. Moore, G. Adhikari, S. Al Kharusi, E. Angelico, I. J. Arnquist , et al. (140 additional authors not shown)

Abstract: Liquid xenon time projection chambers are promising detectors to search for neutrinoless double beta decay (0$νββ$), due to their response uniformity, monolithic sensitive volume, scalability to large target masses, and suitability for extremely low background operations. The nEXO collaboration has designed a tonne-scale time projection chamber that aims to search for 0$νββ$ of \ce{^{136}Xe} with… ▽ More Liquid xenon time projection chambers are promising detectors to search for neutrinoless double beta decay (0$νββ$), due to their response uniformity, monolithic sensitive volume, scalability to large target masses, and suitability for extremely low background operations. The nEXO collaboration has designed a tonne-scale time projection chamber that aims to search for 0$νββ$ of \ce{^{136}Xe} with projected half-life sensitivity of $1.35\times 10^{28}$~yr. To reach this sensitivity, the design goal for nEXO is $\leq$1\% energy resolution at the decay $Q$-value ($2458.07\pm 0.31$~keV). Reaching this resolution requires the efficient collection of both the ionization and scintillation produced in the detector. The nEXO design employs Silicon Photo-Multipliers (SiPMs) to detect the vacuum ultra-violet, 175 nm scintillation light of liquid xenon. This paper reports on the characterization of the newest vacuum ultra-violet sensitive Fondazione Bruno Kessler VUVHD3 SiPMs specifically designed for nEXO, as well as new measurements on new test samples of previously characterised Hamamatsu VUV4 Multi Pixel Photon Counters (MPPCs). Various SiPM and MPPC parameters, such as dark noise, gain, direct crosstalk, correlated avalanches and photon detection efficiency were measured as a function of the applied over voltage and wavelength at liquid xenon temperature (163~K). The results from this study are used to provide updated estimates of the achievable energy resolution at the decay $Q$-value for the nEXO design. △ Less

Submitted 25 November, 2022; v1 submitted 16 September, 2022; originally announced September 2022.

Optimal Sensor Fusion Method for Active Vibration Isolation Systems in Ground-Based Gravitational-Wave Detectors

Authors: T. T. L. Tsang, T. G. F. Li, T. Dehaeze, C. Collette

Abstract: Sensor fusion is a technique used to combine sensors with different noise characteristics into a super sensor that has superior noise performance. To achieve sensor fusion, complementary filters are used in current gravitational-wave detectors to combine relative displacement sensors and inertial sensors for active seismic isolation. Complementary filters are a set of digital filters, which have t… ▽ More Sensor fusion is a technique used to combine sensors with different noise characteristics into a super sensor that has superior noise performance. To achieve sensor fusion, complementary filters are used in current gravitational-wave detectors to combine relative displacement sensors and inertial sensors for active seismic isolation. Complementary filters are a set of digital filters, which have transfer functions that are summed to unity. Currently, complementary filters are shaped and tuned manually rather than optimized, which can be suboptimal and hard to reproduce for future detectors. In this paper, an optimization-based method called $\mathcal{H}_\infty$ synthesis is proposed for synthesizing optimal complementary filters according to the sensor noises themselves. The complementary filter design problem is converted into an optimization problem that seeks minimization of an objective function equivalent to the maximum difference between the super sensor noise and the lower bound in logarithmic scale. The method is exemplified by synthesizing complementary filters for sensor fusion of 1) a relative displacement sensor and an inertial sensor, 2) a relative displacement sensor coupled with seismic noise and an inertial sensor, and 3) hypothetical displacement sensor and inertial sensor, which have slightly different noise characteristics compared to the typical ones. In all cases, the method produces complementary filters that suppress the super sensor noise equally close to the lower bound at all frequencies in logarithmic scale. The synthesized filters contain features that better suppress the sensor noises compared to the pre-designed complementary filters. Overall, the proposed method allows the synthesis of optimal complementary filters according to the sensor noises themselves and is a better and versatile method for solving sensor fusion problems. △ Less

Submitted 5 September, 2022; v1 submitted 29 November, 2021; originally announced November 2021.

Comments: [v4] Manuscript acceptable by Classical and Quantum Gravity. [v3] Equation (13) correction. [v2] Capitalized hyphenated words in the title

Journal ref: Class. Quantum Grav. 39 185007 (2022)

NEXO: Neutrinoless double beta decay search beyond $10^{28}$ year half-life sensitivity

Authors: nEXO Collaboration, G. Adhikari, S. Al Kharusi, E. Angelico, G. Anton, I. J. Arnquist, I. Badhrees, J. Bane, V. Belov, E. P. Bernard, T. Bhatta, A. Bolotnikov, P. A. Breur, J. P. Brodsky, E. Brown, T. Brunner, E. Caden, G. F. Cao, L. Cao, C. Chambers, B. Chana, S. A. Charlebois, D. Chernyak, M. Chiu, B. Cleveland , et al. (136 additional authors not shown)

Abstract: The nEXO neutrinoless double beta decay experiment is designed to use a time projection chamber and 5000 kg of isotopically enriched liquid xenon to search for the decay in $^{136}$Xe. Progress in the detector design, paired with higher fidelity in its simulation and an advanced data analysis, based on the one used for the final results of EXO-200, produce a sensitivity prediction that exceeds the… ▽ More The nEXO neutrinoless double beta decay experiment is designed to use a time projection chamber and 5000 kg of isotopically enriched liquid xenon to search for the decay in $^{136}$Xe. Progress in the detector design, paired with higher fidelity in its simulation and an advanced data analysis, based on the one used for the final results of EXO-200, produce a sensitivity prediction that exceeds the half-life of $10^{28}$ years. Specifically, improvements have been made in the understanding of production of scintillation photons and charge as well as of their transport and reconstruction in the detector. The more detailed knowledge of the detector construction has been paired with more assays for trace radioactivity in different materials. In particular, the use of custom electroformed copper is now incorporated in the design, leading to a substantial reduction in backgrounds from the intrinsic radioactivity of detector materials. Furthermore, a number of assumptions from previous sensitivity projections have gained further support from interim work validating the nEXO experiment concept. Together these improvements and updates suggest that the nEXO experiment will reach a half-life sensitivity of $1.35\times 10^{28}$ yr at 90% confidence level in 10 years of data taking, covering the parameter space associated with the inverted neutrino mass ordering, along with a significant portion of the parameter space for the normal ordering scenario, for almost all nuclear matrix elements. The effects of backgrounds deviating from the nominal values used for the projections are also illustrated, concluding that the nEXO design is robust against a number of imperfections of the model. △ Less

Submitted 22 February, 2022; v1 submitted 30 June, 2021; originally announced June 2021.

Comments: 26 pages, 19 figures, version accepted by Journal of Phys. G

Journal ref: J. Phys. G: Nucl. Part. Phys. 49, 015104 (2022)

Event Reconstruction in a Liquid Xenon Time Projection Chamber with an Optically-Open Field Cage

Authors: T. Stiegler, S. Sangiorgio, J. P. Brodsky, M. Heffner, S. Al Kharusi, G. Anton, I. J. Arnquist, I. Badhrees, P. S. Barbeau, D. Beck, V. Belov, T. Bhatta, A. Bolotnikov, P. A. Breur, E. Brown, T. Brunner, E. Caden, G. F. Cao, L. Cao, C. Chambers, B. Chana, S. A. Charlebois, M. Chiu, B. Cleveland, M. Coon , et al. (126 additional authors not shown)

Abstract: nEXO is a proposed tonne-scale neutrinoless double beta decay ($0νββ$) experiment using liquid ${}^{136}Xe$ (LXe) in a Time Projection Chamber (TPC) to read out ionization and scintillation signals. Between the field cage and the LXe vessel, a layer of LXe ("skin" LXe) is present, where no ionization signal is collected. Only scintillation photons are detected, owing to the lack of optical barrier… ▽ More nEXO is a proposed tonne-scale neutrinoless double beta decay ($0νββ$) experiment using liquid ${}^{136}Xe$ (LXe) in a Time Projection Chamber (TPC) to read out ionization and scintillation signals. Between the field cage and the LXe vessel, a layer of LXe ("skin" LXe) is present, where no ionization signal is collected. Only scintillation photons are detected, owing to the lack of optical barrier around the field cage. In this work, we show that the light originating in the skin LXe region can be used to improve background discrimination by 5% over previous published estimates. This improvement comes from two elements. First, a fraction of the $γ$-ray background is removed by identifying light from interactions with an energy deposition in the skin LXe. Second, background from ${}^{222}Rn$ dissolved in the skin LXe can be efficiently rejected by tagging the $α$ decay in the ${}^{214}Bi-{}^{214}Po$ chain in the skin LXe. △ Less

Submitted 24 March, 2021; v1 submitted 21 September, 2020; originally announced September 2020.

Comments: 11 pages, 12 figures

Report number: LLNL-JRNL-814563

Journal ref: Nuclear Inst. and Methods in Physics Research, A 1000 (2021) 165239

Arepo-MCRT: Monte Carlo Radiation Hydrodynamics on a Moving Mesh

Authors: Aaron Smith, Rahul Kannan, Benny T. -H. Tsang, Mark Vogelsberger, Ruediger Pakmor

Abstract: We present Arepo-MCRT, a novel Monte Carlo radiative transfer (MCRT) radiation-hydrodynamics (RHD) solver for the unstructured moving-mesh code Arepo. Our method is designed for general multiple scattering problems in both optically thin and thick conditions. We incorporate numerous efficiency improvements and noise reduction schemes to help overcome efficiency barriers that typically inhibit conv… ▽ More We present Arepo-MCRT, a novel Monte Carlo radiative transfer (MCRT) radiation-hydrodynamics (RHD) solver for the unstructured moving-mesh code Arepo. Our method is designed for general multiple scattering problems in both optically thin and thick conditions. We incorporate numerous efficiency improvements and noise reduction schemes to help overcome efficiency barriers that typically inhibit convergence. These include continuous absorption and energy deposition, photon weighting and luminosity boosting, local packet merging and splitting, path-based statistical estimators, conservative (face-centered) momentum coupling, adaptive convergence between time steps, implicit Monte Carlo algorithms for thermal emission, and discrete-diffusion Monte Carlo techniques for unresolved scattering, including a novel advection scheme. We primarily focus on the unique aspects of our implementation and discussions of the advantages and drawbacks of our methods in various astrophysical contexts. Finally, we consider several test applications including the levitation of an optically thick layer of gas by trapped infrared radiation. We find that the initial acceleration phase and revitalized second wind are connected via self-regulation of the RHD coupling, such that the RHD method accuracy and simulation resolution each leave important imprints on the long-term behavior of the gas. △ Less

Submitted 11 November, 2020; v1 submitted 4 August, 2020; originally announced August 2020.

Comments: 23 pages, 20 figures, ApJ, in press

Overview of KAGRA: Detector design and construction history

Authors: T. Akutsu, M. Ando, K. Arai, Y. Arai, S. Araki, A. Araya, N. Aritomi, Y. Aso, S. -W. Bae, Y. -B. Bae, L. Baiotti, R. Bajpai, M. A. Barton, K. Cannon, E. Capocasa, M. -L. Chan, C. -S. Chen, K. -H. Chen, Y. -R. Chen, H. -Y. Chu, Y-K. Chu, S. Eguchi, Y. Enomoto, R. Flaminio, Y. Fujii , et al. (175 additional authors not shown)

Abstract: KAGRA is a newly built gravitational-wave telescope, a laser interferometer comprising arms with a length of 3\,km, located in Kamioka, Gifu, Japan. KAGRA was constructed under the ground and it is operated using cryogenic mirrors that help in reducing the seismic and thermal noise. Both technologies are expected to provide directions for the future of gravitational-wave telescopes. In 2019, KAGRA… ▽ More KAGRA is a newly built gravitational-wave telescope, a laser interferometer comprising arms with a length of 3\,km, located in Kamioka, Gifu, Japan. KAGRA was constructed under the ground and it is operated using cryogenic mirrors that help in reducing the seismic and thermal noise. Both technologies are expected to provide directions for the future of gravitational-wave telescopes. In 2019, KAGRA finished all installations with the designed configuration, which we call the baseline KAGRA. In this occasion, we present an overview of the baseline KAGRA from various viewpoints in a series of of articles. In this article, we introduce the design configurations of KAGRA with its historical background. △ Less

Submitted 2 July, 2020; v1 submitted 12 May, 2020; originally announced May 2020.

Comments: 33 pages, 10 figures

Reflectance of Silicon Photomultipliers at Vacuum Ultraviolet Wavelengths

Authors: P. Lv, G. F. Cao, L. J. Wen, S. Al Kharusi, G. Anton, I. J. Arnquist, I. Badhrees, P. S. Barbeau, D. Beck, V. Belov, T. Bhatta, P. A. Breur, J. P. Brodsky, E. Brown, T. Brunner, S. Byrne Mamahit, E. Caden, L. Cao, C. Chambers, B. Chana, S. A. Charlebois, M. Chiu, B. Cleveland, M. Coon, A. Craycraft , et al. (126 additional authors not shown)

Abstract: Characterization of the vacuum ultraviolet (VUV) reflectance of silicon photomultipliers (SiPMs) is important for large-scale SiPM-based photodetector systems. We report the angular dependence of the specular reflectance in a vacuum of SiPMs manufactured by Fondazionc Bruno Kessler (FBK) and Hamamatsu Photonics K.K. (HPK) over wavelengths ranging from 120 nm to 280 nm. Refractive index and extinct… ▽ More Characterization of the vacuum ultraviolet (VUV) reflectance of silicon photomultipliers (SiPMs) is important for large-scale SiPM-based photodetector systems. We report the angular dependence of the specular reflectance in a vacuum of SiPMs manufactured by Fondazionc Bruno Kessler (FBK) and Hamamatsu Photonics K.K. (HPK) over wavelengths ranging from 120 nm to 280 nm. Refractive index and extinction coefficient of the thin silicon-dioxide film deposited on the surface of the FBK SiPMs are derived from reflectance data of a FBK silicon wafer with the same deposited oxide film as SiPMs. The diffuse reflectance of SiPMs is also measured at 193 nm. We use the VUV spectral dependence of the optical constants to predict the reflectance of the FBK silicon wafer and FBK SiPMs in liquid xenon. △ Less

Submitted 4 December, 2019; originally announced December 2019.

Measurements of electron transport in liquid and gas Xenon using a laser-driven photocathode

Authors: O. Njoya, T. Tsang, M. Tarka, W. Fairbank, K. S. Kumar, T. Rao, T. Wager, S. Al Kharusi, G. Anton, I. J. Arnquist, I. Badhrees, P. S. Barbeau, D. Beck, V. Belov, T. Bhatta, J. P. Brodsky, E. Brown, T. Brunner, E. Caden, G. F. Cao, L. Cao, W. R. Cen, C. Chambers, B. Chana, S. A. Charlebois , et al. (131 additional authors not shown)

Abstract: Measurements of electron drift properties in liquid and gaseous xenon are reported. The electrons are generated by the photoelectric effect in a semi-transparent gold photocathode driven in transmission mode with a pulsed ultraviolet laser. The charges drift and diffuse in a small chamber at various electric fields and a fixed drift distance of 2.0 cm. At an electric field of 0.5 kV/cm, the measur… ▽ More Measurements of electron drift properties in liquid and gaseous xenon are reported. The electrons are generated by the photoelectric effect in a semi-transparent gold photocathode driven in transmission mode with a pulsed ultraviolet laser. The charges drift and diffuse in a small chamber at various electric fields and a fixed drift distance of 2.0 cm. At an electric field of 0.5 kV/cm, the measured drift velocities and corresponding temperature coefficients respectively are $1.97 \pm 0.04$ mm/$μ$s and $(-0.69\pm0.05)$\%/K for liquid xenon, and $1.42 \pm 0.03$ mm/$μ$s and $(+0.11\pm0.01)$\%/K for gaseous xenon at 1.5 bar. In addition, we measure longitudinal diffusion coefficients of $25.7 \pm 4.6$ cm$^2$/s and $149 \pm 23$ cm$^2$/s, for liquid and gas, respectively. The quantum efficiency of the gold photocathode is studied at the photon energy of 4.73 eV in liquid and gaseous xenon, and vacuum. These charge transport properties and the behavior of photocathodes in a xenon environment are important in designing and calibrating future large scale noble liquid detectors. △ Less

Submitted 24 November, 2019; originally announced November 2019.

Reflectivity and PDE of VUV4 Hamamatsu SiPMs in Liquid Xenon

Authors: P. Nakarmi, I. Ostrovskiy, A. K. Soma, F. Retiere, S. Al Kharusi, M. Alfaris, G. Anton, I. J. Arnquist, I. Badhrees, P. S. Barbeau, D. Beck, V. Belov, T. Bhatta, J. Blatchford, P. A. Breur, J. P. Brodsky, E. Brown, T. Brunner, S. Byrne Mamahit, E. Caden, G. F. Cao, L. Cao, C. Chambers, B. Chana, S. A. Charlebois , et al. (130 additional authors not shown)

Abstract: Understanding reflective properties of materials and photodetection efficiency (PDE) of photodetectors is important for optimizing energy resolution and sensitivity of the next generation neutrinoless double beta decay, direct detection dark matter, and neutrino oscillation experiments that will use noble liquid gases, such as nEXO, DARWIN, DarkSide-20k, and DUNE. Little information is currently a… ▽ More Understanding reflective properties of materials and photodetection efficiency (PDE) of photodetectors is important for optimizing energy resolution and sensitivity of the next generation neutrinoless double beta decay, direct detection dark matter, and neutrino oscillation experiments that will use noble liquid gases, such as nEXO, DARWIN, DarkSide-20k, and DUNE. Little information is currently available about reflectivity and PDE in liquid noble gases, because such measurements are difficult to conduct in a cryogenic environment and at short enough wavelengths. Here we report a measurement of specular reflectivity and relative PDE of Hamamatsu VUV4 silicon photomultipliers (SiPMs) with 50 micrometer micro-cells conducted with xenon scintillation light (~175 nm) in liquid xenon. The specular reflectivity at 15 deg. incidence of three samples of VUV4 SiPMs is found to be 30.4+/-1.4%, 28.6+/-1.3%, and 28.0+/-1.3%, respectively. The PDE at normal incidence differs by +/-8% (standard deviation) among the three devices. The angular dependence of the reflectivity and PDE was also measured for one of the SiPMs. Both the reflectivity and PDE decrease as the angle of incidence increases. This is the first measurement of an angular dependence of PDE and reflectivity of a SiPM in liquid xenon. △ Less

Submitted 24 December, 2019; v1 submitted 14 October, 2019; originally announced October 2019.

Comments: 21 pages, 15 figures, 6 tables. As accepted by JINST

An arm length stabilization system for KAGRA and future gravitational-wave detectors

Authors: T. Akutsu, M. Ando, K. Arai, K. Arai, Y. Arai, S. Araki, A. Araya, N. Aritomi, Y. Aso, S. Bae, Y. Bae, L. Baiotti, R. Bajpai, M. A. Barton, K. Cannon, E. Capocasa, M. Chan, C. Chen, K. Chen, Y. Chen, H. Chu, Y-K. Chu, K. Doi, S. Eguchi, Y. Enomoto , et al. (181 additional authors not shown)

Abstract: Modern ground-based gravitational wave (GW) detectors require a complex interferometer configuration with multiple coupled optical cavities. Since achieving the resonances of the arm cavities is the most challenging among the lock acquisition processes, the scheme called arm length stabilization (ALS) had been employed for lock acquisition of the arm cavities. We designed a new type of the ALS, wh… ▽ More Modern ground-based gravitational wave (GW) detectors require a complex interferometer configuration with multiple coupled optical cavities. Since achieving the resonances of the arm cavities is the most challenging among the lock acquisition processes, the scheme called arm length stabilization (ALS) had been employed for lock acquisition of the arm cavities. We designed a new type of the ALS, which is compatible with the interferometers having long arms like the next generation GW detectors. The features of the new ALS are that the control configuration is simpler than those of previous ones and that it is not necessary to lay optical fibers for the ALS along the kilometer-long arms of the detector. Along with simulations of its noise performance, an experimental test of the new ALS was performed utilizing a single arm cavity of KAGRA. This paper presents the first results of the test where we demonstrated that lock acquisition of the arm cavity was achieved using the new ALS and residual noise was measured to be $8.2\,\mathrm{Hz}$ in units of frequency, which is smaller than the linewidth of the arm cavity and thus low enough to lock the full interferometer of KAGRA in a repeatable and reliable manner. △ Less

Submitted 28 November, 2019; v1 submitted 2 October, 2019; originally announced October 2019.

Comments: 21 pages, 8figures

Journal ref: Class. Quantum Grav. 37 (2020) 035004

Simulation of charge readout with segmented tiles in nEXO

Authors: Z. Li, W. R. Cen, A. Robinson, D. C. Moore, L. J. Wen, A. Odian, S. Al Kharusi, G. Anton, I. J. Arnquist, I. Badhrees, P. S. Barbeau, D. Beck, V. Belov, T. Bhatta, J. P. Brodsky, E. Brown, T. Brunner, E. Caden, G. F. Cao, L. Cao, C. Chambers, B. Chana, S. A. Charlebois, M. Chiu, B. Cleveland , et al. (128 additional authors not shown)

Abstract: nEXO is a proposed experiment to search for the neutrino-less double beta decay ($0νββ$) of $^{136}$Xe in a tonne-scale liquid xenon time projection chamber (TPC). The nEXO TPC will be equipped with charge collection tiles to form the anode. In this work, the charge reconstruction performance of this anode design is studied with a dedicated simulation package. A multi-variate method and a deep neu… ▽ More nEXO is a proposed experiment to search for the neutrino-less double beta decay ($0νββ$) of $^{136}$Xe in a tonne-scale liquid xenon time projection chamber (TPC). The nEXO TPC will be equipped with charge collection tiles to form the anode. In this work, the charge reconstruction performance of this anode design is studied with a dedicated simulation package. A multi-variate method and a deep neural network are developed to distinguish simulated $0νββ$ signals from backgrounds arising from trace levels of natural radioactivity in the detector materials. These simulations indicate that the nEXO TPC with charge-collection tiles shows promising capability to discriminate the $0νββ$ signal from backgrounds. The estimated half-life sensitivity for $0νββ$ decay is improved by $\sim$20$~(32)\%$ with the multi-variate~(deep neural network) methods considered here, relative to the sensitivity estimated in the nEXO pre-conceptual design report. △ Less

Submitted 11 October, 2019; v1 submitted 17 July, 2019; originally announced July 2019.

Journal ref: JINST 14 (2019) no.09, P09020

Characterization of the Hamamatsu VUV4 MPPCs for nEXO

Authors: G. Gallina, P. Giampa, F. Retiere, J. Kroeger, G. Zhang, M. Ward, P. Margetak, G. Lic, T. Tsang, L. Doria, S. Al Kharusi, M. Alfaris, G. Anton, I. J. Arnquist, I. Badhrees, P. S. Barbeau, D. Beck, V. Belov, T. Bhatta, J. Blatchford, J. P. Brodsky, E. Brown, T. Brunner, G. F. Cao, L. Cao , et al. (126 additional authors not shown)

Abstract: In this paper we report on the characterization of the Hamamatsu VUV4 (S/N: S13370-6152) Vacuum Ultra-Violet (VUV) sensitive Silicon Photo-Multipliers (SiPMs) as part of the development of a solution for the detection of liquid xenon scintillation light for the nEXO experiment. Various SiPM features, such as: dark noise, gain, correlated avalanches, direct crosstalk and Photon Detection Efficiency… ▽ More In this paper we report on the characterization of the Hamamatsu VUV4 (S/N: S13370-6152) Vacuum Ultra-Violet (VUV) sensitive Silicon Photo-Multipliers (SiPMs) as part of the development of a solution for the detection of liquid xenon scintillation light for the nEXO experiment. Various SiPM features, such as: dark noise, gain, correlated avalanches, direct crosstalk and Photon Detection Efficiency (PDE) were measured in a dedicated setup at TRIUMF. SiPMs were characterized in the range $163 \text{ } \text{K} \leq \text{T}\leq 233 \text{ } \text{K}$. At an over voltage of $3.1\pm0.2$ V and at $\text{T}=163 \text{ }\text{K}$ we report a number of Correlated Avalanches (CAs) per pulse in the $1 \upmu\text{s}$ interval following the trigger pulse of $0.161\pm0.005$. At the same settings the Dark-Noise (DN) rate is $0.137\pm0.002 \text{ Hz/mm}^{2}$. Both the number of CAs and the DN rate are within nEXO specifications. The PDE of the Hamamatsu VUV4 was measured for two different devices at $\text{T}=233 \text{ }\text{K}$ for a mean wavelength of $189\pm7\text{ nm}$. At $3.6\pm0.2$ V and $3.5\pm0.2$ V of over voltage we report a PDE of $13.4\pm2.6\text{ }\%$ and $11\pm2\%$, corresponding to a saturation PDE of $14.8\pm2.8\text{ }\%$ and $12.2\pm2.3\%$, respectively. Both values are well below the $24\text{ }\%$ saturation PDE advertised by Hamamatsu. More generally, the second device tested at $3.5\pm0.2$ V of over voltage is below the nEXO PDE requirement. The first one instead yields a PDE that is marginally close to meeting the nEXO specifications. This suggests that with modest improvements the Hamamatsu VUV4 MPPCs could be considered as an alternative to the FBK-LF SiPMs for the final design of the nEXO detector. △ Less

Submitted 7 June, 2019; v1 submitted 8 March, 2019; originally announced March 2019.

Study of Silicon Photomultiplier Performance in External Electric Fields

Authors: X. L. Sun, T. Tolba, G. F. Cao, P. Lv, L. J. Wen, A. Odian, F. Vachon, A. Alamre, J. B. Albert, G. Anton, I. J. Arnquist, I. Badhrees, P. S. Barbeau, D. Beck, V. Belov, T. Bhatta, F. Bourque, J. P. Brodsky, E. Brown, T. Brunner, A. Burenkov, L. Cao, W. R. Cen, C. Chambers, S. A. Charlebois , et al. (127 additional authors not shown)

Abstract: We report on the performance of silicon photomultiplier (SiPM) light sensors operating in electric field strength up to 30 kV/cm and at a temperature of 149K, relative to their performance in the absence of an external electric field. The SiPM devices used in this study show stable gain, photon detection efficiency, and rates of correlated pulses, when exposed to external fields, within the estima… ▽ More We report on the performance of silicon photomultiplier (SiPM) light sensors operating in electric field strength up to 30 kV/cm and at a temperature of 149K, relative to their performance in the absence of an external electric field. The SiPM devices used in this study show stable gain, photon detection efficiency, and rates of correlated pulses, when exposed to external fields, within the estimated uncertainties. No observable physical damage to the bulk or surface of the devices was caused by the exposure. △ Less

Submitted 9 July, 2018; originally announced July 2018.

Comments: 16 pages, 12 figures, 2 tables and two conferences (INPC2016 and TIPP2017)

Imaging individual barium atoms in solid xenon for barium tagging in nEXO

Authors: C. Chambers, T. Walton, D. Fairbank, A. Craycraft, D. R. Yahne, J. Todd, A. Iverson, W. Fairbank, A. Alamare, J. B. Albert, G. Anton, I. J. Arnquist, I. Badhrees, P. S. Barbeau, D. Beck, V. Belov, T. Bhatta, F. Bourque, J. P. Brodsky, E. Brown, T. Brunner, A. Burenkov, G. F. Cao, L. Cao, W. R. Cen , et al. (126 additional authors not shown)

Abstract: The search for neutrinoless double beta decay probes the fundamental properties of neutrinos, including whether or not the neutrino and antineutrino are distinct. Double beta detectors are large and expensive, so background reduction is essential for extracting the highest sensitivity. The identification, or 'tagging', of the $^{136}$Ba daughter atom from double beta decay of $^{136}$Xe provides a… ▽ More The search for neutrinoless double beta decay probes the fundamental properties of neutrinos, including whether or not the neutrino and antineutrino are distinct. Double beta detectors are large and expensive, so background reduction is essential for extracting the highest sensitivity. The identification, or 'tagging', of the $^{136}$Ba daughter atom from double beta decay of $^{136}$Xe provides a technique for eliminating backgrounds in the nEXO neutrinoless double beta decay experiment. The tagging scheme studied in this work utilizes a cryogenic probe to trap the barium atom in solid xenon, where the barium atom is tagged via fluorescence imaging in the solid xenon matrix. Here we demonstrate imaging and counting of individual atoms of barium in solid xenon by scanning a focused laser across a solid xenon matrix deposited on a sapphire window. When the laser sits on an individual atom, the fluorescence persists for $\sim$30~s before dropping abruptly to the background level, a clear confirmation of one-atom imaging. No barium fluorescence persists following evaporation of a barium deposit to a limit of $\leq$0.16\%. This is the first time that single atoms have been imaged in solid noble element. It establishes the basic principle of a barium tagging technique for nEXO. △ Less

Submitted 12 December, 2018; v1 submitted 27 June, 2018; originally announced June 2018.

VUV-sensitive Silicon Photomultipliers for Xenon Scintillation Light Detection in nEXO

Authors: A. Jamil, T. Ziegler, P. Hufschmidt, G. Li, L. Lupin-Jimenez, T. Michel, I. Ostrovskiy, F. Retière, J. Schneider, M. Wagenpfeil, J. B. Albert, G. Anton, I. J. Arnquist, I. Badhrees, P. Barbeau, D. Beck, V. Belov, J. P. Brodsky, E. Brown, T. Brunner, A. Burenkov, G. F. Cao, L. Cao, W. R. Cen, C. Chambers , et al. (118 additional authors not shown)

Abstract: Future tonne-scale liquefied noble gas detectors depend on efficient light detection in the VUV range. In the past years Silicon Photomultipliers (SiPMs) have emerged as a valid alternative to standard photomultiplier tubes or large area avalanche photodiodes. The next generation double beta decay experiment, nEXO, with a 5 tonne liquid xenon time projection chamber, will use SiPMs for detecting t… ▽ More Future tonne-scale liquefied noble gas detectors depend on efficient light detection in the VUV range. In the past years Silicon Photomultipliers (SiPMs) have emerged as a valid alternative to standard photomultiplier tubes or large area avalanche photodiodes. The next generation double beta decay experiment, nEXO, with a 5 tonne liquid xenon time projection chamber, will use SiPMs for detecting the $178\,\text{nm}$ xenon scintillation light, in order to achieve an energy resolution of $σ/ Q_{ββ} = 1\, \%$. This paper presents recent measurements of the VUV-HD generation SiPMs from Fondazione Bruno Kessler in two complementary setups. It includes measurements of the photon detection efficiency with gaseous xenon scintillation light in a vacuum setup and dark measurements in a dry nitrogen gas setup. We report improved photon detection efficiency at $175\,\text{nm}$ compared to previous generation devices, that would meet the criteria of nEXO. Furthermore, we present the projected nEXO detector light collection and energy resolution that could be achieved by using these SiPMs. △ Less

Submitted 13 March, 2019; v1 submitted 6 June, 2018; originally announced June 2018.

Comments: 11 pages, 13 figures, 2 tables

Journal ref: IEEE Trans.Nucl.Sci. 65 (2018) no.11

nEXO Pre-Conceptual Design Report

Authors: nEXO Collaboration, S. Al Kharusi, A. Alamre, J. B. Albert, M. Alfaris, G. Anton, I. J. Arnquist, I. Badhrees, P. S. Barbeau, D. Beck, V. Belov, T. Bhatta, F. Bourque, J. P. Brodsky, E. Brown, T. Brunner, A. Burenkov, G. F. Cao, L. Cao, W. R. Cen, C. Chambers, S. A. Charlebois, M. Chiu, B. Cleveland, R. Conley , et al. (149 additional authors not shown)

Abstract: The projected performance and detector configuration of nEXO are described in this pre-Conceptual Design Report (pCDR). nEXO is a tonne-scale neutrinoless double beta ($0νββ$) decay search in $^{136}$Xe, based on the ultra-low background liquid xenon technology validated by EXO-200. With $\simeq$ 5000 kg of xenon enriched to 90% in the isotope 136, nEXO has a projected half-life sensitivity of app… ▽ More The projected performance and detector configuration of nEXO are described in this pre-Conceptual Design Report (pCDR). nEXO is a tonne-scale neutrinoless double beta ($0νββ$) decay search in $^{136}$Xe, based on the ultra-low background liquid xenon technology validated by EXO-200. With $\simeq$ 5000 kg of xenon enriched to 90% in the isotope 136, nEXO has a projected half-life sensitivity of approximately $10^{28}$ years. This represents an improvement in sensitivity of about two orders of magnitude with respect to current results. Based on the experience gained from EXO-200 and the effectiveness of xenon purification techniques, we expect the background to be dominated by external sources of radiation. The sensitivity increase is, therefore, entirely derived from the increase of active mass in a monolithic and homogeneous detector, along with some technical advances perfected in the course of a dedicated R&D program. Hence the risk which is inherent to the construction of a large, ultra-low background detector is reduced, as the intrinsic radioactive contamination requirements are generally not beyond those demonstrated with the present generation $0νββ$ decay experiments. Indeed, most of the required materials have been already assayed or reasonable estimates of their properties are at hand. The details described herein represent the base design of the detector configuration as of early 2018. Where potential design improvements are possible, alternatives are discussed. This design for nEXO presents a compelling path towards a next generation search for $0νββ$, with a substantial possibility to discover physics beyond the Standard Model. △ Less

Submitted 13 August, 2018; v1 submitted 28 May, 2018; originally announced May 2018.

Comments: 182 pages, minor revisions

Characterization of an Ionization Readout Tile for nEXO

Authors: nEXO Collaboration, M. Jewell, A. Schubert, W. R. Cen, J. Dalmasson, R. DeVoe, L. Fabris, G. Gratta, A. Jamil, G. Li, A. Odian, M. Patel, A. Pocar, D. Qiu, Q. Wang, L. J. Wen, J. B. Albert, G. Anton, I. J. Arnquist, I. Badhrees, P. Barbeau, D. Beck, V. Belov, F. Bourque, J. P. Brodsky , et al. (120 additional authors not shown)

Abstract: A new design for the anode of a time projection chamber, consisting of a charge-detecting "tile", is investigated for use in large scale liquid xenon detectors. The tile is produced by depositing 60 orthogonal metal charge-collecting strips, 3~mm wide, on a 10~\si{\cm} $\times$ 10~\si{\cm} fused-silica wafer. These charge tiles may be employed by large detectors, such as the proposed tonne-scale n… ▽ More A new design for the anode of a time projection chamber, consisting of a charge-detecting "tile", is investigated for use in large scale liquid xenon detectors. The tile is produced by depositing 60 orthogonal metal charge-collecting strips, 3~mm wide, on a 10~\si{\cm} $\times$ 10~\si{\cm} fused-silica wafer. These charge tiles may be employed by large detectors, such as the proposed tonne-scale nEXO experiment to search for neutrinoless double-beta decay. Modular by design, an array of tiles can cover a sizable area. The width of each strip is small compared to the size of the tile, so a Frisch grid is not required. A grid-less, tiled anode design is beneficial for an experiment such as nEXO, where a wire tensioning support structure and Frisch grid might contribute radioactive backgrounds and would have to be designed to accommodate cycling to cryogenic temperatures. The segmented anode also reduces some degeneracies in signal reconstruction that arise in large-area crossed-wire time projection chambers. A prototype tile was tested in a cell containing liquid xenon. Very good agreement is achieved between the measured ionization spectrum of a $^{207}$Bi source and simulations that include the microphysics of recombination in xenon and a detailed modeling of the electrostatic field of the detector. An energy resolution $σ/E$=5.5\% is observed at 570~\si{keV}, comparable to the best intrinsic ionization-only resolution reported in literature for liquid xenon at 936~V/\si{cm}. △ Less

Submitted 19 January, 2018; v1 submitted 13 October, 2017; originally announced October 2017.

Comments: 18 pages, 13 figures, as published

Journal ref: 2018 JINST 13 P01006

Sensitivity and discovery potential of the proposed nEXO experiment to neutrinoless double beta decay

Authors: nEXO Collaboration, J. B. Albert, G. Anton, I. J. Arnquist, I. Badhrees, P. S. Barbeau, D. Beck, V. Belov, F. Bourque, J. P. Brodsky, E. Brown, T. Brunner, A. Burenkov, G. F. Cao, L. Cao, W. R. Cen, C. Chambers, S. A. Charlebois, M. Chiu, B. Cleveland, M. Coon, M. Côté, A. Craycraft, W. Cree, J. Dalmasson , et al. (121 additional authors not shown)

Abstract: The next-generation Enriched Xenon Observatory (nEXO) is a proposed experiment to search for neutrinoless double beta ($0νββ$) decay in $^{136}$Xe with a target half-life sensitivity of approximately $10^{28}$ years using $5\times10^3$ kg of isotopically enriched liquid-xenon in a time projection chamber. This improvement of two orders of magnitude in sensitivity over current limits is obtained by… ▽ More The next-generation Enriched Xenon Observatory (nEXO) is a proposed experiment to search for neutrinoless double beta ($0νββ$) decay in $^{136}$Xe with a target half-life sensitivity of approximately $10^{28}$ years using $5\times10^3$ kg of isotopically enriched liquid-xenon in a time projection chamber. This improvement of two orders of magnitude in sensitivity over current limits is obtained by a significant increase of the $^{136}$Xe mass, the monolithic and homogeneous configuration of the active medium, and the multi-parameter measurements of the interactions enabled by the time projection chamber. The detector concept and anticipated performance are presented based upon demonstrated realizable background rates. △ Less

Submitted 19 October, 2018; v1 submitted 13 October, 2017; originally announced October 2017.

Comments: v2 as published

Report number: LLNL-JRNL-737682

Journal ref: Phys. Rev. C 97, 065503 (2018)

Discrete diffusion Lyman-alpha radiative transfer

Authors: Aaron Smith, Benny T. -H. Tsang, Volker Bromm, Milos Milosavljevic

Abstract: Due to its accuracy and generality, Monte Carlo radiative transfer (MCRT) has emerged as the prevalent method for Ly$α$ radiative transfer in arbitrary geometries. The standard MCRT encounters a significant efficiency barrier in the high optical depth, diffusion regime. Multiple acceleration schemes have been developed to improve the efficiency of MCRT but the noise from photon packet discretizati… ▽ More Due to its accuracy and generality, Monte Carlo radiative transfer (MCRT) has emerged as the prevalent method for Ly$α$ radiative transfer in arbitrary geometries. The standard MCRT encounters a significant efficiency barrier in the high optical depth, diffusion regime. Multiple acceleration schemes have been developed to improve the efficiency of MCRT but the noise from photon packet discretization remains a challenge. The discrete diffusion Monte Carlo (DDMC) scheme has been successfully applied in state-of-the-art radiation hydrodynamics (RHD) simulations. Still, the established framework is not optimal for resonant line transfer. Inspired by the DDMC paradigm, we present a novel extension to resonant DDMC (rDDMC) in which diffusion in space and frequency are treated on equal footing. We explore the robustness of our new method and demonstrate a level of performance that justifies incorporating the method into existing Ly$α$ codes. We present computational speedups of $\sim 10^2$-$10^6$ relative to contemporary MCRT implementations with schemes that skip scattering in the core of the line profile. This is because the rDDMC runtime scales with the spatial and frequency resolution rather than the number of scatterings - the latter is typically $\propto τ_0$ for static media, or $\propto (a τ_0)^{2/3}$ with core-skipping. We anticipate new frontiers in which on-the-fly Ly$α$ radiative transfer calculations are feasible in 3D RHD. More generally, rDDMC is transferable to any computationally demanding problem amenable to a Fokker-Planck approximation of frequency redistribution. △ Less

Submitted 9 June, 2018; v1 submitted 28 September, 2017; originally announced September 2017.

Comments: 15 pages, 13 figures, MNRAS, in press

A 20-Liter Test Stand with Gas Purification for Liquid Argon Research

Authors: Yichen Li, Craig Thorn, Wei Tang, Jyoti Joshi, Xin Qian, Milind Diwan, Steve Kettell, William Morse, Triveni Rao, James Stewart, Thomas Tsang, Lige Zhang

Abstract: We describe the design of a 20-liter test stand constructed to study fundamental properties of liquid argon (LAr). This system utilizes a simple, cost-effective gas argon (GAr) purification to achieve high purity, which is necessary to study electron transport properties in LAr. An electron drift stack with up to 25 cm length is constructed to study electron drift, diffusion, and attachment at var… ▽ More We describe the design of a 20-liter test stand constructed to study fundamental properties of liquid argon (LAr). This system utilizes a simple, cost-effective gas argon (GAr) purification to achieve high purity, which is necessary to study electron transport properties in LAr. An electron drift stack with up to 25 cm length is constructed to study electron drift, diffusion, and attachment at various electric fields. A gold photocathode and a pulsed laser are used as a bright electron source. The operational performance of this system is reported. △ Less

Submitted 7 June, 2016; v1 submitted 4 February, 2016; originally announced February 2016.

Comments: 18 pages, 11 figures, Accepted by JINST on May 31, 2016

Journal ref: Journal of Instrumentation, Volume 11, June 2016

Measurement of Longitudinal Electron Diffusion in Liquid Argon

Authors: Yichen Li, Thomas Tsang, Craig Thorn, Xin Qian, Milind Diwan, Jyoti Joshi, Steve Kettell, William Morse, Triveni Rao, James Stewart, Wei Tang, Brett Viren

Abstract: We report the measurement of longitudinal electron diffusion coefficients in liquid argon for electric fields between 100 and 2000 V/cm with a gold photocathode as a bright electron source. The measurement principle, apparatus, and data analysis are described. Our results, which are consistent with previous measurements in the region between 100 to 350 V/cm [1] , are systematically higher than the… ▽ More We report the measurement of longitudinal electron diffusion coefficients in liquid argon for electric fields between 100 and 2000 V/cm with a gold photocathode as a bright electron source. The measurement principle, apparatus, and data analysis are described. Our results, which are consistent with previous measurements in the region between 100 to 350 V/cm [1] , are systematically higher than the prediction of Atrazhev-Timoshkin[2], and represent the world's best measurement in the region between 350 to 2000 V/cm. The quantum efficiency of the gold photocathode, the drift velocity and longitudinal diffusion coefficients in gas argon are also presented. △ Less

Submitted 30 January, 2016; v1 submitted 27 August, 2015; originally announced August 2015.

Comments: Accepted by NIM on January 29th. 2016

Journal ref: Nuclear Inst. and Methods in Physics Research, A (2016), pp. 160-170

A Single Shot, Sub-picosecond Beam Bunch Characterization with Electro-optic Techniques

Authors: Y. K. Semertzidis, R. Burns, V. Castillo, R. Larsen, D. M. Lazarus, D. Nikas, C. Ozben, T. Srinivasan-Rao, A. Stillman, T. Tsang, L. Kowalski

Abstract: In the past decade, the bunch lengths of electrons in accelerators have decreased dramatically to the range of a few picoseconds \cite{Uesaka94,Trotz97}. Measurement of the length as well as the longitudinal profile of these short bunches have been a topic of research in a number of institutions \cite{Uesaka97,Liu97,Hutchins00}. One of the techniques uses the electric field induced by the passag… ▽ More In the past decade, the bunch lengths of electrons in accelerators have decreased dramatically to the range of a few picoseconds \cite{Uesaka94,Trotz97}. Measurement of the length as well as the longitudinal profile of these short bunches have been a topic of research in a number of institutions \cite{Uesaka97,Liu97,Hutchins00}. One of the techniques uses the electric field induced by the passage of electrons in the vicinity of a birefringent crystal to change its optical characteristics. Well-established electro-optic techniques can then be used to measure the temporal characteristics of the electron bunch. In this paper we present a novel, non-invasive, single-shot approach to improve the resolution to tens of femtoseconds so that sub-millimeter bunch length can be measured. △ Less

Submitted 17 October, 2001; originally announced October 2001.

Comments: 3 pages, 1 figure. The paper was presented as contribution to working group T9 at Snowmass2001

Journal ref: eConf C010630 (2001) T901