-
3D E-textile for Exercise Physiology and Clinical Maternal Health Monitoring
Authors:
Junyi Zhao,
Chansoo Kim,
Weilun Li,
Zichao Wen,
Zhili Xiao,
Yong Wang,
Shantanu Chakrabartty,
Chuan Wang
Abstract:
Electronic textiles (E-textiles) offer great wearing comfort and unobtrusiveness, thus holding potential for next-generation health monitoring wearables. However, the practical implementation is hampered by challenges associated with poor signal quality, substantial motion artifacts, durability for long-term usage, and non-ideal user experience. Here, we report a cost-effective E-textile system th…
▽ More
Electronic textiles (E-textiles) offer great wearing comfort and unobtrusiveness, thus holding potential for next-generation health monitoring wearables. However, the practical implementation is hampered by challenges associated with poor signal quality, substantial motion artifacts, durability for long-term usage, and non-ideal user experience. Here, we report a cost-effective E-textile system that features 3D microfiber-based electrodes for greatly increasing the surface area. The soft and fluffy conductive microfibers disperse freely and securely adhere to the skin, achieving a low impedance at the electrode-skin interface even in the absence of gel. A superhydrophobic fluorinated self-assembled monolayer was deposited on the E-textile surface to render it waterproof while retaining the electrical conductivity. Equipped with a custom-designed motion-artifact canceling wireless data recording circuit, the E-textile system could be integrated into a variety of smart garments for exercise physiology and health monitoring applications. Real-time multimodal electrophysiological signal monitoring, including electrocardiogram (ECG) and electromyography (EMG), was successfully carried out during strenuous cycling and even underwater swimming activities. Furthermore, a multi-channel E-textile was developed and implemented in clinical patient studies for simultaneous real-time monitoring of maternal ECG and uterine EMG signals, incorporating spatial-temporal potential mapping capabilities.
△ Less
Submitted 10 July, 2024;
originally announced July 2024.
-
3D orientation super-resolution spatial-frequency-shift microscopy
Authors:
Xiaowei Liu,
Mingwei Tang,
Ning Zhou,
Chenlei Pang,
Zhong Wen,
Xu Liu,
Qing Yang
Abstract:
Super-resolution mapping of the 3D orientation of fluorophores reveals the alignment of biological structures where the fluorophores are tightly attached, and thus plays a vital role in studying the organization and dynamics of bio-complexes. However, current super-resolution imaging techniques are either limited to 2D orientation mapping or suffer from slow speed and the requirement of special la…
▽ More
Super-resolution mapping of the 3D orientation of fluorophores reveals the alignment of biological structures where the fluorophores are tightly attached, and thus plays a vital role in studying the organization and dynamics of bio-complexes. However, current super-resolution imaging techniques are either limited to 2D orientation mapping or suffer from slow speed and the requirement of special labels in 3D orientation mapping. Here, we propose a novel polarized virtual spatial-frequency-shift effect to overcome these restrictions to achieve a universal 3D orientation super-resolution mapping capability. To demonstrate the mechanism, we simulate the imaging process and reconstruct the spatial-angular information for sparsely distributed dipoles with random 3D orientations and microfilament-like structures decorated with fluorophores oriented parallel to them. The 3D orientation distribution can be recovered with a doubled spatial resolution and an average angular precision of up to 2.39 degrees. The performance of the approach with noise has also been analyzed considering real implementation.
△ Less
Submitted 22 January, 2024; v1 submitted 17 January, 2024;
originally announced January 2024.
-
Active learning of effective Hamiltonian for super-large-scale atomic structures
Authors:
Xingyue Ma,
Hongying Chen,
Ri He,
Zhanbo Yu,
Sergei Prokhorenko,
Zheng Wen,
Zhicheng Zhong,
Jorge Iñiguez,
L. Bellaiche,
Di Wu,
Yurong Yang
Abstract:
The first-principles-based effective Hamiltonian scheme provides one of the most accurate modeling technique for large-scale structures, especially for ferroelectrics. However, the parameterization of the effective Hamiltonian is complicated and can be difficult for some complex systems such as high-entropy perovskites. Here, we propose a general form of effective Hamiltonian and develop an active…
▽ More
The first-principles-based effective Hamiltonian scheme provides one of the most accurate modeling technique for large-scale structures, especially for ferroelectrics. However, the parameterization of the effective Hamiltonian is complicated and can be difficult for some complex systems such as high-entropy perovskites. Here, we propose a general form of effective Hamiltonian and develop an active machine learning approach to parameterize the effective Hamiltonian based on Bayesian linear regression. The parameterization is employed in molecular dynamics simulations with the prediction of energy, forces, stress and their uncertainties at each step, which decides whether first-principles calculations are executed to retrain the parameters. Structures of BaTiO$_3$, Pb(Zr$_{0.75}$Ti$_{0.25}$)O$_3$ and (Pb,Sr)TiO$_3$ system are taken as examples to show the accuracy of this approach, as compared with conventional parametrization method and experiments. This machine learning approach provides a universal and automatic way to compute the effective Hamiltonian parameters for any considered complex systems with super-large-scale (more than $10^7$ atoms) atomic structures.
△ Less
Submitted 14 May, 2024; v1 submitted 17 July, 2023;
originally announced July 2023.
-
Super-Resolution Imaging via Angular Magnification
Authors:
Yi Zhou,
Dingpeng Liao,
Kun Zhang,
Zijie Ma,
Shikai Wu,
Jun Ma,
Xuemei Dai,
Zhengguo Shang,
Zhongquan Wen,
Gang Chen
Abstract:
The far-field resolution of optical imaging systems is restricted by the Abbe diffraction limit, a direct result of the wave nature of light. One successful technological approach to circumventing this limit is to reduce the effective size of a point-spread-function. In the past decades, great endeavors have been made to engineer an effective point-spread-function by exploiting different mechanism…
▽ More
The far-field resolution of optical imaging systems is restricted by the Abbe diffraction limit, a direct result of the wave nature of light. One successful technological approach to circumventing this limit is to reduce the effective size of a point-spread-function. In the past decades, great endeavors have been made to engineer an effective point-spread-function by exploiting different mechanisms, including optical nonlinearities and structured light illumination. However, these methods are hard to be applied to objects in a far distance. Here, we propose a new way to achieve super-resolution in a far field by utilizing angular magnification. We present the first proof-of-concept demonstration of such an idea and demonstrate a new class of lenses with angular magnification for far-field super-resolution imaging. Both theoretical and experimental results demonstrate a more than two-fold enhancement beyond the angular-resolution limit in the far-field imaging. The proposed approach can be applied to super-resolution imaging of objects in far distance. It has promising potential applications in super-resolution telescopes and remote sensing.
△ Less
Submitted 17 May, 2023;
originally announced May 2023.
-
Spatial and Modal Optimal Transport for Fast Cross-Modal MRI Reconstruction
Authors:
Qi Wang,
Zhijie Wen,
Jun Shi,
Qian Wang,
Dinggang Shen,
Shihui Ying
Abstract:
Multi-modal magnetic resonance imaging (MRI) plays a crucial role in comprehensive disease diagnosis in clinical medicine. However, acquiring certain modalities, such as T2-weighted images (T2WIs), is time-consuming and prone to be with motion artifacts. It negatively impacts subsequent multi-modal image analysis. To address this issue, we propose an end-to-end deep learning framework that utilize…
▽ More
Multi-modal magnetic resonance imaging (MRI) plays a crucial role in comprehensive disease diagnosis in clinical medicine. However, acquiring certain modalities, such as T2-weighted images (T2WIs), is time-consuming and prone to be with motion artifacts. It negatively impacts subsequent multi-modal image analysis. To address this issue, we propose an end-to-end deep learning framework that utilizes T1-weighted images (T1WIs) as auxiliary modalities to expedite T2WIs' acquisitions. While image pre-processing is capable of mitigating misalignment, improper parameter selection leads to adverse pre-processing effects, requiring iterative experimentation and adjustment. To overcome this shortage, we employ Optimal Transport (OT) to synthesize T2WIs by aligning T1WIs and performing cross-modal synthesis, effectively mitigating spatial misalignment effects. Furthermore, we adopt an alternating iteration framework between the reconstruction task and the cross-modal synthesis task to optimize the final results. Then, we prove that the reconstructed T2WIs and the synthetic T2WIs become closer on the T2 image manifold with iterations increasing, and further illustrate that the improved reconstruction result enhances the synthesis process, whereas the enhanced synthesis result improves the reconstruction process. Finally, experimental results from FastMRI and internal datasets confirm the effectiveness of our method, demonstrating significant improvements in image reconstruction quality even at low sampling rates.
△ Less
Submitted 21 May, 2024; v1 submitted 4 May, 2023;
originally announced May 2023.
-
Ultra-high-speed coherent anti-Stokes Raman spectroscopy with a hybrid dual-comb source
Authors:
Tianjian Lv,
Bing Han,
Ming Yan,
Zhaoyang Wen,
Kun Huang,
Kangwen Yang,
Heping Zeng
Abstract:
Coherent anti-Stokes Raman scattering (CARS) spectroscopy with time-delayed ultrashort pulses and a single-pixel photodetector has shown great potential for spectroscopic imaging and transient studies in chemistry and biological research. However, those systems rely on mechanical delay lines or two asynchronous optical combs with inflexible repetition frequencies, technically limiting their acquis…
▽ More
Coherent anti-Stokes Raman scattering (CARS) spectroscopy with time-delayed ultrashort pulses and a single-pixel photodetector has shown great potential for spectroscopic imaging and transient studies in chemistry and biological research. However, those systems rely on mechanical delay lines or two asynchronous optical combs with inflexible repetition frequencies, technically limiting their acquisition speeds. Here, we demonstrate a hybrid dual-comb CARS system involving a broadband fiber laser and a highly-flexible, frequency-modulated electro-optic comb. We achieve multiplex CARS spectra (2800-3200 cm-1), with a moderate resolution (22 cm-1), at a maximum refresh rate of 1 MHz, limited by the radio-frequency synthesizer we use. Fast spectroscopic CARS imaging is demonstrated for liquid mixtures. Our system enables spectral measurements in the high-wavenumber C-H stretching region at a record speed that is an order of magnitude higher than state-of-the-art systems, which may open up new opportunities for fast chemical sensing and imaging.
△ Less
Submitted 3 December, 2023; v1 submitted 17 April, 2023;
originally announced April 2023.
-
Efficient reference-less transmission matrix retrieval for a multimode fiber using fast Fourier transform
Authors:
Jingshan Zhong,
Zhong Wen,
Quanzhi Li,
Qilin Deng,
Qing Yang
Abstract:
Transmission matrix (TM) linearly maps the incident and transmitted complex fields, and has been used widely due to its ability to characterize scattering media. It is computationally demanding to reconstruct the TM from intensity images measured by a reference-less experimental setup. Removing reference beam for interference gains the advantage of simple experimental setup. However, the long comp…
▽ More
Transmission matrix (TM) linearly maps the incident and transmitted complex fields, and has been used widely due to its ability to characterize scattering media. It is computationally demanding to reconstruct the TM from intensity images measured by a reference-less experimental setup. Removing reference beam for interference gains the advantage of simple experimental setup. However, the long computational time still limits its practical application. We propose an efficient reference-less TM retrieval method for multimode fiber (MMF). Our method adopts a data acquisition scheme which employs Fourier transform matrix in the design of the incident fields. We develop a nonlinear optimization algorithm to solve the TM retrieval problem in a parallel manner. The data acquisition scheme allows the algorithm to be implemented with fast Fourier transform (FFT), and hence achieves great efficiency improvement. Further, our method acquires intensity images at a defocus plane and correct the error of relative phase offset of TM recovered from the intensity images measured at one fixed plane. We validate the proposed TM retrieval method with both simulations and experiments. By using FFT, our TM retrieval algorithm achieves 1200x speed-up in computational time, and recovers $2286 \times 8192$ TM of a 0.22 NA and $50 \ μm$ diameter MMF with 124.9 seconds by a computer of 32 CPU cores. With the advantages of efficiency and the correction of phase offset, our method paves the way for the application of reference-less TM retrieval in real practice.
△ Less
Submitted 1 March, 2023; v1 submitted 27 February, 2023;
originally announced February 2023.
-
Observation of Q-switched and continuous wave regimes with mode-hopping in Er-doped fiber lasers incorporating a dynamic population grating
Authors:
Zengrun Wen,
Xiulin Fan,
Kaile Wang,
Weiming Wang,
Song Gao,
Wenjing Hao,
Yuanmei Gao,
Yangjian Cai,
Liren Zheng
Abstract:
Dynamic population gratings (DPGs) in rare-earth doped fibers are prevalent devices in fiber lasers for the production of single-longitudinal-mode emission, Q-switched pulses, and wavelength self-sweeping regimes. This study presents a transition from Q-switched state to continuous wave (CW) state, accompanying irregular mode-hopping, in an erbium-doped fiber laser with a heavily-doped DPG centere…
▽ More
Dynamic population gratings (DPGs) in rare-earth doped fibers are prevalent devices in fiber lasers for the production of single-longitudinal-mode emission, Q-switched pulses, and wavelength self-sweeping regimes. This study presents a transition from Q-switched state to continuous wave (CW) state, accompanying irregular mode-hopping, in an erbium-doped fiber laser with a heavily-doped DPG centered at 1549.95 nm. Our results demonstrate that the transition between these two states can be achieved by adjusting the pump power. The repetition frequency of the Q-switched pulse increases monotonically with the increasing pump power, while the pulse duration initially narrows and then expands because the reduced peak intensity weakens the nonlinear effect. Additionally, modulation peaks are evident on both the Q-switched pulse train and the CW background, which are induced by the irregular mode-hopping caused by the DPG. Furthermore, we observe that the central wavelength fluctuates within a range of 0.05 nm. These results provide valuable insight into the DPG effect in heavily-doped fibers.
△ Less
Submitted 23 February, 2023;
originally announced February 2023.
-
Ultra-soft Thermal Diodes Enabled by Dual-Alkane-Based Phase Change Composites
Authors:
Yunsong Pang,
Junhong Li,
Zhibin Wen,
Ting Liang,
Shan Gao,
Dezhao Huang,
Rong Sun Jianbin Xu Tengfei Luo,
Xiaoliang Zeng
Abstract:
Thermal diode, a type of device that allows heat to flow in one direction preferentially, can be employed in many thermal applications. However, if the mechanical compliance of the thermal diode is poor, which prevents its intimate contact with heat source or sink surfaces, the thermal rectification performance cannot be used to its full extent. In this work, we introduce a heterojunction thermal…
▽ More
Thermal diode, a type of device that allows heat to flow in one direction preferentially, can be employed in many thermal applications. However, if the mechanical compliance of the thermal diode is poor, which prevents its intimate contact with heat source or sink surfaces, the thermal rectification performance cannot be used to its full extent. In this work, we introduce a heterojunction thermal diode made of a phase change material (PCM) consisting of dual alkanes (hexadecane and paraffine wax) and polyurethane. The fabricated thermal diode exhibits an ultra soft mechanical feature, with a low elastic modulus of 0.4 KPa and larger than 300% elongation until failure: the best values reported to date for thermal diodes. The measured thermal rectification factor is as high as 1.42 that in line with the theoretical model prediction. Molecular dynamic simulations reveal that the thermal rectification mechanism of the PCM based thermal diode originates from the crystal-amorphous phase transition of the hexadecane terminal as the temperature bias flips. Therefore, the heat flow in the forward direction is greater than the flux in the reverse direction. A series of experiments and finite element analyses are employed to verify the feasibility of thermal diodes for applications. Our results demonstrate that the fabricated thermal diode can be potentially used in building envelop to help with temperature regulation and thus reduce energy consumption for space cooling or heating.
△ Less
Submitted 11 January, 2023;
originally announced January 2023.
-
Single multimode fiber for in vivo light-field encoded nano-imaging
Authors:
Zhong Wen,
Zhenyu Dong,
Chenlei Pang,
Clemens F. Kaminski,
Qilin Deng,
Jinggang Xu,
Liqiang Wang,
Songguo Liu,
Jianbin Tang,
Wei Chen,
Xu Liu,
Qing Yang
Abstract:
Super-resolution microscopy normally requiring complex and cumbersome optics is not applicable for in situ imaging through a narrow channel. Here, we demonstrate single hair-thin multimode fiber (MMF) endoscope (less than 250 $μm$) for in vivo light-field nano-imaging, which is called spatial-frequency tracking adaptive beacon light-field encoded nano-endoscopy (STABLE nano-endoscopy) that enables…
▽ More
Super-resolution microscopy normally requiring complex and cumbersome optics is not applicable for in situ imaging through a narrow channel. Here, we demonstrate single hair-thin multimode fiber (MMF) endoscope (less than 250 $μm$) for in vivo light-field nano-imaging, which is called spatial-frequency tracking adaptive beacon light-field encoded nano-endoscopy (STABLE nano-endoscopy) that enables three-dimensional (3D) subcellular-scale imaging. Spatial-frequency tracking provides up to $10^3$ Hz disorder tracking that ensures stable imaging in long-haul MMFs (up to 200 m) under various conditions. Full-vector modulation and fluorescence emission difference are combined to enhance the imaging signal-to-noise ratio two times and to improve the resolution to sub-diffraction-limited 250 nm ($λ/3NA$). STABLE nano-endoscopy and white-light endoscopy (WLE) are integrated to achieve cross-scale in vivo imaging inside the lumen. This high-resolution and robust observation in a minimally invasive manner paves the way to gain a deeper understanding of the disease mechanisms and to bridge clinical and biological sciences.
△ Less
Submitted 7 July, 2022;
originally announced July 2022.
-
On the pure state $v$-representability of density matrix embedding theory
Authors:
Fabian M. Faulstich,
Raehyun Kim,
Zhi-Hao Cui,
Zaiwen Wen,
Garnet Kin-Lic Chan,
Lin Lin
Abstract:
Density matrix embedding theory (DMET) formally requires the matching of density matrix blocks obtained from high-level and low-level theories, but this is sometimes not achievable in practical calculations. In such a case, the global band gap of the low-level theory vanishes, and this can require additional numerical considerations. We find that both the violation of the exact matching condition…
▽ More
Density matrix embedding theory (DMET) formally requires the matching of density matrix blocks obtained from high-level and low-level theories, but this is sometimes not achievable in practical calculations. In such a case, the global band gap of the low-level theory vanishes, and this can require additional numerical considerations. We find that both the violation of the exact matching condition and the vanishing low-level gap are related to the assumption that the high-level density matrix blocks are non-interacting pure-state $v$-representable (NI-PS-V), which assumes that the low-level density matrix is constructed following the Aufbau principle. In order to relax the NI-PS-V condition, we develop an augmented Lagrangian method to match the density matrix blocks without referring to the Aufbau principle. Numerical results for 2D Hubbard and hydrogen model systems indicate that in some challenging scenarios, the relaxation of the Aufbau principle directly leads to exact matching of the density matrix blocks, which also yields improved accuracy.
△ Less
Submitted 13 January, 2022; v1 submitted 18 October, 2021;
originally announced October 2021.
-
Anomalous reflection at the interface of binary synthetic photonic lattices
Authors:
Zhiqing Zhang,
Yanan Dai,
Zengrun Wen,
Zhenjuan Liu,
Haohao Wang,
Yuanmei Gao,
Yanlong Shen,
Xinyuan Qi
Abstract:
We construct a binary synthetic photonic lattice theoretically with an effective magnetic field by projecting two fiber loops' light intensity and adjusting the phase distribution precisely. By tuning the phase modulator, wave vector, and propagation constant of an effective waveguide, the interface's transmittance could be manipulated. Further light dynamics show that the light pulse can achieve…
▽ More
We construct a binary synthetic photonic lattice theoretically with an effective magnetic field by projecting two fiber loops' light intensity and adjusting the phase distribution precisely. By tuning the phase modulator, wave vector, and propagation constant of an effective waveguide, the interface's transmittance could be manipulated. Further light dynamics show that the light pulse can achieve total reflection without diffraction and exchanges the light energy in two optical fiber loops completely when phase distribution and wave vector meet certain conditions. Our study may provide a new way to realize optical switches in optical interconnection and optical communication.
△ Less
Submitted 15 March, 2021; v1 submitted 9 March, 2021;
originally announced March 2021.
-
Back-n White Neutron Source at CSNS and its Applications
Authors:
The CSNS Back-n Collaboration,
:,
Jing-Yu Tang,
Qi An,
Jiang-Bo Bai,
Jie Bao,
Yu Bao,
Ping Cao,
Hao-Lei Chen,
Qi-Ping Chen,
Yong-Hao Chen,
Zhen Chen,
Zeng-Qi Cui,
Rui-Rui Fan,
Chang-Qing Feng,
Ke-Qing Gao,
Xiao-Long Gao,
Min-Hao Gu,
Chang-Cai Han,
Zi-Jie Han,
Guo-Zhu He,
Yong-Cheng He,
Yang Hong,
Yi-Wei Hu,
Han-Xiong Huang
, et al. (52 additional authors not shown)
Abstract:
Back-streaming neutrons from the spallation target of the China Spallation Neutron Source (CSNS) that emit through the incoming proton channel were exploited to build a white neutron beam facility (the so-called Back-n white neutron source), which was completed in March 2018. The Back-n neutron beam is very intense, at approximately 2*10^7 n/cm^2/s at 55 m from the target, and has a nominal proton…
▽ More
Back-streaming neutrons from the spallation target of the China Spallation Neutron Source (CSNS) that emit through the incoming proton channel were exploited to build a white neutron beam facility (the so-called Back-n white neutron source), which was completed in March 2018. The Back-n neutron beam is very intense, at approximately 2*10^7 n/cm^2/s at 55 m from the target, and has a nominal proton beam with a power of 100 kW in the CSNS-I phase and a kinetic energy of 1.6 GeV and a thick tungsten target in multiple slices with modest moderation from the cooling water through the slices. In addition, the excellent energy spectrum spanning from 0.5 eV to 200 MeV, and a good time resolution related to the time-of-flight measurements make it a typical white neutron source for nuclear data measurements; its overall performance is among that of the best white neutron sources in the world. Equipped with advanced spectrometers, detectors, and application utilities, the Back-n facility can serve wide applications, with a focus on neutron-induced cross-section measurements. This article presents an overview of the neutron beam characteristics, the experimental setups, and the ongoing applications at Back-n.
△ Less
Submitted 16 January, 2021;
originally announced January 2021.
-
Self-sweeping ytterbium-doped fiber laser based on a fiber saturable absorber
Authors:
Zengrun Wen,
Kaile Wang,
Baole Lu,
Haowei Chen,
Jintao Bai
Abstract:
Generally speaking, the self-sweeping effect relies on the dynamical grating formed in a gain fiber. Here, the normal self-sweeping was generated in a pump-free ytterbium-doped fiber which serves as a fiber saturable absorber and is introduced to the laser cavity by a circulator in this experiment. The sweeping rate and the sweeping range alter as usual, both of which can be controlled by the pump…
▽ More
Generally speaking, the self-sweeping effect relies on the dynamical grating formed in a gain fiber. Here, the normal self-sweeping was generated in a pump-free ytterbium-doped fiber which serves as a fiber saturable absorber and is introduced to the laser cavity by a circulator in this experiment. The sweeping rate and the sweeping range alter as usual, both of which can be controlled by the pump power. Further, a new self-pulse signal is observed and discussed in this work, which shows the difference of the self-sweeping effects between active fiber and fiber saturable absorber.
△ Less
Submitted 28 October, 2020;
originally announced October 2020.
-
Narrow bandwidth Q-switched Erbium-doped fiber laser based on dynamic saturable absorption filtering effect
Authors:
Zengrun Wen,
Kaile Wang,
Shuangcheng Chen,
Xinyuan Qi,
Baole Lu,
Jintao Bai
Abstract:
We proposed a narrow spectral bandwidth Erbium-doped fiber (EDF) laser Q-switched by a homemade saturable dynamic induced grating (SDIG) which is introduced via reforming the structure of a fiber saturable absorbers FSA with a piece of EDF and a fiber Bragg grating. The SDIG integrates both saturable absorption and spectral filtering effect simultaneously, which was confirmed through theoretical a…
▽ More
We proposed a narrow spectral bandwidth Erbium-doped fiber (EDF) laser Q-switched by a homemade saturable dynamic induced grating (SDIG) which is introduced via reforming the structure of a fiber saturable absorbers FSA with a piece of EDF and a fiber Bragg grating. The SDIG integrates both saturable absorption and spectral filtering effect simultaneously, which was confirmed through theoretical analysis and experimental results for the first time, to the best of our knowledge. Further study verified that the spectral width of the Q-switched emissions is decided by the length of the SDIG and the input power of the pump source. The Q-switched pulse with the narrowest spectral width of about 29.1 pm achieved in this work is the narrowest bandwidth pulse in the domain of the FSA Q-switched fiber lasers when the length of SDIG and pump power are 20 cm and 250 mW, respectively. Our method provides a simple way to obtain the Q-switched pulses with narrow bandwidths, which have promising applications for nonlinear frequency conversion, Doppler LIDAR and coherent beam combinations.
△ Less
Submitted 20 July, 2020;
originally announced July 2020.
-
Discretized optical dynamics in one-dimensionally synthetic photonic lattice
Authors:
Zengrun Wen,
Kaile Wang,
Baole Lu,
Xinyuan Qi,
Haowei Chen,
Jintao Bai
Abstract:
Synthetic photonic lattice with temporally controlled potentials is a versatile platform for realizing wave dynamics associated with physical areas of optics and quantum physics. Here, discrete optics in one-dimensionally synthetic photonic lattice is investigated systematically, in which the light behavior is highly similar to those in evanescently coupled one-dimensional discrete waveguides. Suc…
▽ More
Synthetic photonic lattice with temporally controlled potentials is a versatile platform for realizing wave dynamics associated with physical areas of optics and quantum physics. Here, discrete optics in one-dimensionally synthetic photonic lattice is investigated systematically, in which the light behavior is highly similar to those in evanescently coupled one-dimensional discrete waveguides. Such a synthetic dimension is constructed with position-dependent periodic effective gauge fields based on Aharonov-Bohm effect arising from the phase accumulations of the fiber loops. By tuning the phase accumulations and coupling coefficient of the coupler, the band translation and gap property can be modulated which further results in the impulse and tailored Gaussian wave packet responses as well as Talbot recurrences. In addition, Bloch oscillations and Anderson localization can also be obtained when the phase accumulations are linearly changed and weakly modulated in random, respectively. The periodic effective gauge fields configuration in our protocol enables SPL to be a research platform for one-dimensional dynamically modulated elements or even non-Hermitian waveguides.
△ Less
Submitted 18 May, 2020;
originally announced May 2020.
-
How does boiling occur in lattice Boltzmann simulations?
Authors:
Qing Li,
Y. Yu,
Z. X. Wen
Abstract:
In recent years, the lattice Boltzmann (LB) method has been widely employed to simulate boiling phenomena [A. Márkus and G. Házi, Phys. Rev. E 83, 046705 (2011); Biferale et al., Phys. Rev. Lett. 108, 104502 (2012); Li et al., Phys. Rev. E 96, 063303 (2017); Wu et al., Int. J. Heat Mass Transfer 126, 773 (2018)]. However, a very important issue still remains open, i.e., how does boiling occur in t…
▽ More
In recent years, the lattice Boltzmann (LB) method has been widely employed to simulate boiling phenomena [A. Márkus and G. Házi, Phys. Rev. E 83, 046705 (2011); Biferale et al., Phys. Rev. Lett. 108, 104502 (2012); Li et al., Phys. Rev. E 96, 063303 (2017); Wu et al., Int. J. Heat Mass Transfer 126, 773 (2018)]. However, a very important issue still remains open, i.e., how does boiling occur in the LB simulations? For instance, the existing LB studies showed that the boiling on a hydrophobic surface begins at a lower wall superheat than that on a hydrophilic surface, which qualitatively agrees well with experimental studies, but no one has yet explained how this phenomenon appears in the LB simulations and what happened in the simulations after changing the wettability of the heating surface. In this paper, the LB boiling mechanism is revealed by analyzing boiling on a flat surface with mixed wettability and boiling on a structured surface with homogeneous wettability. Through a theoretical analysis, we demonstrate that, when the same wall superheat is applied, in the LB boiling simulations the fluid density near the heating surface decreases faster on a hydrophobic surface than that on a hydrophilic surface. Accordingly, a lower wall superheat can induce the phase transition from liquid to vapor on a hydrophobic surface than that on a hydrophilic surface. Furthermore, a similar theoretical analysis shows that the fluid density decreases fastest at concave corners in the case of a structured surface with homogeneous wettability, which explains why vapor bubbles are nucleated at concave corners in the LB simulations of boiling on structured surfaces.
△ Less
Submitted 20 May, 2020; v1 submitted 14 May, 2020;
originally announced May 2020.
-
Synthetic topological insulator with periodically modulated effective gauge fields
Authors:
Zengrun Wen,
Baole Lu,
Kaiwen Ji,
Kaile Wang,
Haowei Chen,
Xinyuan Qi,
Jintao Bai
Abstract:
We study both theoretically and numerically the topological edge states in synthetic photonic lattice with finitely periodic gauge potentials. The effective gauge fields are implemented by tailoring the phase alternatively and periodically, which finally results in symmetric total reflection at two boundaries of the one-dimensional synthetic lattice. Further tuning the nearest-neighbor coupling an…
▽ More
We study both theoretically and numerically the topological edge states in synthetic photonic lattice with finitely periodic gauge potentials. The effective gauge fields are implemented by tailoring the phase alternatively and periodically, which finally results in symmetric total reflection at two boundaries of the one-dimensional synthetic lattice. Further tuning the nearest-neighbor coupling anisotropically, topological edge states occur at the two boundaries. Our work provides a new way to study the topological physics of one-dimensional coupled waveguide arrays with synthetic photonic lattice.
△ Less
Submitted 12 May, 2020;
originally announced May 2020.
-
A modular phantom and software to characterize 3D geometric distortion in MRI
Authors:
Jordan M. Slagowski,
Yao Ding,
Manik Aima,
Zhifei Wen,
Clifton D. Fuller,
Caroline Chung,
J. Matthew Debnam,
Ken-Pin Hwang,
Mo Kadbi,
Janio Szklaruk,
Jihong Wang
Abstract:
MRI offers outstanding soft tissue contrast that may reduce uncertainties in target and organ-at-risk delineation and enable online adaptive image-guided treatment. Spatial distortions resulting from non-linearities in the gradient fields and non-uniformity in the main magnetic field must be accounted for across the imaging field-of-view to prevent systematic errors during treatment delivery. This…
▽ More
MRI offers outstanding soft tissue contrast that may reduce uncertainties in target and organ-at-risk delineation and enable online adaptive image-guided treatment. Spatial distortions resulting from non-linearities in the gradient fields and non-uniformity in the main magnetic field must be accounted for across the imaging field-of-view to prevent systematic errors during treatment delivery. This work presents a modular phantom and software application to characterize geometric distortion (GD) within the large field-of-view MRI images required for radiation therapy simulation. The modular phantom is assembled from a series of rectangular foam blocks containing high-contrast fiducial markers in a known configuration. The modular phantom design facilitates transportation of the phantom between different MR scanners and MR-guided linear accelerators and allows the phantom to be adapted to fit different sized bores or coils. The phantom was evaluated using a 1.5T MR-guided linear accelerator (MR-Linac) and 1.5T and 3.0T diagnostic scanners. Performance was assessed by varying acquisition parameters to induce image distortions in a known manner. Imaging was performed using T1 and T2 weighted pulse sequences with 2D and 3D distortion correction algorithms and the receiver bandwidth (BW) varied as 250-815 Hz/pixel. Phantom set-up reproducibility was evaluated across independent set-ups. The software was validated by comparison with a non-modular phantom. Average geometric distortion was 0.94+/-0.58 mm for the MR-Linac, 0.90+/-0.53 mm for the 1.5 T scanner, and 1.15+/-0.62 mm for the 3.0T scanner, for a 400 mm diameter volume-of-interest. GD increased, as expected, with decreasing BW, and with the 2D versus 3D correction algorithm. Differences in GD attributed to phantom set-up were 0.13 mm or less. Differences in GD for the two software applications were less than 0.07 mm.
△ Less
Submitted 6 April, 2020; v1 submitted 23 March, 2020;
originally announced March 2020.
-
Enhancement of nucleate boiling by combining the effects of surface structure and mixed wettability: A lattice Boltzmann study
Authors:
W. X. Li,
Q. Li,
Y. Yu,
Z. X. Wen
Abstract:
The combination of microstructures and mixed wettability for enhancing nucleate boiling has attracted much attention in recent years. However, in the existing experimental and numerical studies, the tops of microstructures are entirely subjected to wettability modification, which makes the influences of mixed wettability dependant on the characteristic length of microstructures. In order to disclo…
▽ More
The combination of microstructures and mixed wettability for enhancing nucleate boiling has attracted much attention in recent years. However, in the existing experimental and numerical studies, the tops of microstructures are entirely subjected to wettability modification, which makes the influences of mixed wettability dependant on the characteristic length of microstructures. In order to disclose the joint effects of surface structure and mixed wettability on nucleate boiling, in this work we propose an improved type of pillar-textured surface with mixed wettability, in which the tops of square pillars are partially subjected to wettability modification. Numerical investigation of the boiling heat transfer performance on the improved mixed-wettability surface is carried out using a three-dimensional thermal multiphase lattice Boltzmann model. The numerical results show that the width of the wettability-modified region plays an important role in the boiling performance of the improved mixed-wettability surface and the best boiling performance is achieved in the situation that the width of the wettability-modified region is sufficiently large but the bubble nucleated on the pillar top still does not interfere with the coalescence-departure mechanism of the bubbles nucleated around the pillar, which optimizes the joint effects of surface structure and mixed wettability for enhancing nucleate boiling. The influences of the shape of the wettability-modified region are also studied. Among the investigated shapes, the square is found to perform better than the other two shapes.
△ Less
Submitted 3 May, 2020; v1 submitted 2 January, 2020;
originally announced January 2020.
-
Modified mass-conservative curved boundary scheme for lattice Boltzmann simulations
Authors:
Y. Yu,
Q. Li,
Z. X. Wen
Abstract:
The lattice Boltzmann (LB) method has gained much success in a variety of fields involving fluid flow and/or heat transfer. In this method, the bounce-back scheme is a popular boundary scheme for treating nonslip boundaries. However, this scheme leads to staircase-shaped boundaries for curved walls. Therefore many curved boundary schemes have been proposed, but mostly suffer from mass leakage at t…
▽ More
The lattice Boltzmann (LB) method has gained much success in a variety of fields involving fluid flow and/or heat transfer. In this method, the bounce-back scheme is a popular boundary scheme for treating nonslip boundaries. However, this scheme leads to staircase-shaped boundaries for curved walls. Therefore many curved boundary schemes have been proposed, but mostly suffer from mass leakage at the curved boundaries. Several correction schemes have been suggested for simulating single-phase flows, but very few discussions or studies have been made for two-phase LB simulations with curved boundaries. In this paper, the performance of three well-known types of curved boundary schemes in two-phase LB simulations is investigated through modeling a droplet resting on a circular cylinder. For all of the investigated schemes, the results show that the simulated droplet rapidly "evaporates" under the nonslip and isothermal conditions, owing to the imbalance between the mass streamed out of the system by the outgoing distribution functions and the mass streamed into the system by the incoming distribution functions at each boundary node. Based on the numerical investigation, we formulate two modified mass-conservative curved boundary schemes for two-phase LB simulations. The accuracy of the modified curved boundary schemes and their capability of conserving mass in two-phase LB simulations are numerically demonstrated.
△ Less
Submitted 6 November, 2019; v1 submitted 24 August, 2019;
originally announced August 2019.
-
Measurement of the neutron beam profile of the Back-n white neutron facility at CSNS with a Micromegas detector
Authors:
Binbin Qi,
Yang Li,
Danyang Zhu,
Zhiyong Zhang,
Ruirui Fan,
Jiang Pan,
Jianxin Feng,
Chengming Liu,
Changqing Feng,
Jianbei Liu,
Ming Shao,
Yi Zhou,
Yanfeng Wang,
Han Yi,
Qi An,
Huaiyong Bai,
Jie Bao,
Ping Cao,
Qiping Chen,
Yonghao Chen,
Pinjing Cheng,
Zengqi Cui,
Minhao Gu,
Fengqin Guo,
Changcai Han
, et al. (62 additional authors not shown)
Abstract:
The Back-n white neutron beam line, which uses back-streaming white neutrons from the spallation target of the China Spallation Neutron Source, is used for nuclear data measurements. A Micromegas-based neutron detector with two variants was specially developed to measure the beam spot distribution for this beam line. In this article, the design, fabrication, and characterization of the detector ar…
▽ More
The Back-n white neutron beam line, which uses back-streaming white neutrons from the spallation target of the China Spallation Neutron Source, is used for nuclear data measurements. A Micromegas-based neutron detector with two variants was specially developed to measure the beam spot distribution for this beam line. In this article, the design, fabrication, and characterization of the detector are described. The results of the detector performance tests are presented, which include the relative electron transparency, the gain and the gain uniformity, and the neutron beam profile reconstruction capability. The result of the first measurement of the Back-n neutron beam spot distribution is also presented.
△ Less
Submitted 19 January, 2020; v1 submitted 6 August, 2019;
originally announced August 2019.
-
Improved three-dimensional color-gradient lattice Boltzmann model for immiscible multiphase flows
Authors:
Z. X. Wen,
Q. Li,
Y. Yu,
Kai. H. Luo
Abstract:
In this paper, an improved three-dimensional color-gradient lattice Boltzmann (LB) model is proposed for simulating immiscible multiphase flows. Compared with the previous three-dimensional color-gradient LB models, which suffer from the lack of Galilean invariance and considerable numerical errors in many cases owing to the error terms in the recovered macroscopic equations, the present model eli…
▽ More
In this paper, an improved three-dimensional color-gradient lattice Boltzmann (LB) model is proposed for simulating immiscible multiphase flows. Compared with the previous three-dimensional color-gradient LB models, which suffer from the lack of Galilean invariance and considerable numerical errors in many cases owing to the error terms in the recovered macroscopic equations, the present model eliminates the error terms and therefore improves the numerical accuracy and enhances the Galilean invariance. To validate the proposed model, numerical simulation are performed. First, the test of a moving droplet in a uniform flow field is employed to verify the Galilean invariance of the improved model. Subsequently, numerical simulations are carried out for the layered two-phase flow and three-dimensional Rayleigh-Taylor instability. It is shown that, using the improved model, the numerical accuracy can be significantly improved in comparison with the color-gradient LB model without the improvements. Finally, the capability of the improved color-gradient LB model for simulating dynamic multiphase flows at a relatively large density ratio is demonstrated via the simulation of droplet impact on a solid surface.
△ Less
Submitted 7 April, 2019;
originally announced April 2019.
-
Electronics of Time-of-flight Measurement for Back-n at CSNS
Authors:
T. Yu,
P. Cao,
X. Y. Ji,
L. K. Xie,
X. R. Huang,
Q. An,
H. Y. Bai,
J. Bao,
Y. H. Chen,
P. J. Cheng,
Z. Q. Cui,
R. R. Fan,
C. Q. Feng,
M. H. Gu,
Z. J. Han,
G. Z. He,
Y. C. He,
Y. F. He,
H. X. Huang,
W. L. Huang,
X. L. Ji,
H. Y. Jiang,
W. Jiang,
H. Y. Jing,
L. Kang
, et al. (46 additional authors not shown)
Abstract:
Back-n is a white neutron experimental facility at China Spallation Neutron Source (CSNS). The time structure of the primary proton beam make it fully applicable to use TOF (time-of-flight) method for neutron energy measuring. We implement the electronics of TOF measurement on the general-purpose readout electronics designed for all of the seven detectors in Back-n. The electronics is based on PXI…
▽ More
Back-n is a white neutron experimental facility at China Spallation Neutron Source (CSNS). The time structure of the primary proton beam make it fully applicable to use TOF (time-of-flight) method for neutron energy measuring. We implement the electronics of TOF measurement on the general-purpose readout electronics designed for all of the seven detectors in Back-n. The electronics is based on PXIe (Peripheral Component Interconnect Express eXtensions for Instrumentation) platform, which is composed of FDM (Field Digitizer Modules), TCM (Trigger and Clock Module), and SCM (Signal Conditioning Module). T0 signal synchronous to the CSNS accelerator represents the neutron emission from the target. It is the start of time stamp. The trigger and clock module (TCM) receives, synchronizes and distributes the T0 signal to each FDM based on the PXIe backplane bus. Meantime, detector signals after being conditioned are fed into FDMs for waveform digitizing. First sample point of the signal is the stop of time stamp. According to the start, stop time stamp and the time of signal over threshold, the total TOF can be obtained. FPGA-based (Field Programmable Gate Array) TDC is implemented on TCM to accurately acquire the time interval between the asynchronous T0 signal and the global synchronous clock phase. There is also an FPGA-based TDC on FDM to accurately acquire the time interval between T0 arriving at FDM and the first sample point of the detector signal, the over threshold time of signal is obtained offline. This method for TOF measurement is efficient and not needed for additional modules. Test result shows the accuracy of TOF is sub-nanosecond and can meet the requirement for Back-n at CSNS.
△ Less
Submitted 24 June, 2018;
originally announced June 2018.
-
T0 Fan-out for Back-n White Neutron Facility at CSNS
Authors:
X. Y. Ji,
P. Cao,
T. Yu,
L. K. Xie,
X. R. Huang,
Q. An,
H. Y. Bai,
J. Bao,
Y. H. Chen,
P. J. Cheng,
Z. Q. Cui,
R. R. Fan,
C. Q. Feng,
M. H. Gu,
Z. J. Han,
G. Z. He,
Y. C. He,
Y. F. He,
H. X. Huang,
W. L. Huang,
X. L. Ji,
H. Y. Jiang,
W. Jiang,
H. Y. Jing,
L. Kang
, et al. (46 additional authors not shown)
Abstract:
the main physics goal for Back-n white neutron facility at China Spallation Neutron Source (CSNS) is to measure nuclear data. The energy of neutrons is one of the most important parameters for measuring nuclear data. Method of time of flight (TOF) is used to obtain the energy of neutrons. The time when proton bunches hit the thick tungsten target is considered as the start point of TOF. T0 signal,…
▽ More
the main physics goal for Back-n white neutron facility at China Spallation Neutron Source (CSNS) is to measure nuclear data. The energy of neutrons is one of the most important parameters for measuring nuclear data. Method of time of flight (TOF) is used to obtain the energy of neutrons. The time when proton bunches hit the thick tungsten target is considered as the start point of TOF. T0 signal, generated from the CSNS accelerator, represents this start time. Besides, the T0 signal is also used as the gate control signal that triggers the readout electronics. Obviously, the timing precision of T0 directly affects the measurement precision of TOF and controls the running or readout electronics. In this paper, the T0 fan-out for Back-n white neutron facility at CSNS is proposed. The T0 signal travelling from the CSNS accelerator is fanned out to the two underground experiment stations respectively over long cables. To guarantee the timing precision, T0 signal is conditioned with good signal edge. Furthermore, techniques of signal pre-emphasizing and equalizing are used to improve signal quality after T0 being transmitted over long cables with about 100 m length. Experiments show that the T0 fan-out works well, the T0 signal transmitted over 100 m remains a good time resolution with a standard deviation of 25 ps. It absolutely meets the required accuracy of the measurement of TOF.
△ Less
Submitted 24 June, 2018;
originally announced June 2018.
-
A Semi-smooth Newton Method for Solving Semidefinite Programs in Electronic Structure Calculations
Authors:
Yongfeng Li,
Zaiwen Wen,
Chao Yang,
Yaxiang Yuan
Abstract:
The ground state energy of a many-electron system can be approximated by an variational approach in which the total energy of the system is minimized with respect to one and two-body reduced density matrices (RDM) instead of many-electron wavefunctions. This problem can be formulated as a semidefinite programming problem. Due the large size of the problem, the well-known interior point method can…
▽ More
The ground state energy of a many-electron system can be approximated by an variational approach in which the total energy of the system is minimized with respect to one and two-body reduced density matrices (RDM) instead of many-electron wavefunctions. This problem can be formulated as a semidefinite programming problem. Due the large size of the problem, the well-known interior point method can only be used to tackle problems with a few atoms. First-order methods such as the the alternating direction method of multipliers (ADMM) have much lower computational cost per iteration. However, their convergence can be slow, especially for obtaining highly accurate approximations. In this paper, we present a practical and efficient second-order semi-smooth Newton type method for solving the SDP formulation of the energy minimization problem. We discuss a number of techniques that can be used to improve the computational efficiency of the method and achieve global convergence. Extensive numerical experiments show that our approach is competitive to the state-of-the-art methods in terms of both accuracy and speed.
△ Less
Submitted 31 August, 2017; v1 submitted 26 August, 2017;
originally announced August 2017.
-
On stable solitons and interactions of the generalized Gross-Pitaevskii equation with PT-and non-PT-symmetric potentials
Authors:
Zhenya Yan,
Yong Chen,
Zichao Wen
Abstract:
We report the bright solitons of the generalized Gross-Pitaevskii (GP) equation with some types of physically relevant parity-time-(PT-) and non-PT-symmetric potentials. We find that the constant momentum coefficient can modulate the linear stability and complicated transverse power-flows (not always from the gain toward loss) of nonlinear modes. However, the varying momentum coefficient Gamma(x)…
▽ More
We report the bright solitons of the generalized Gross-Pitaevskii (GP) equation with some types of physically relevant parity-time-(PT-) and non-PT-symmetric potentials. We find that the constant momentum coefficient can modulate the linear stability and complicated transverse power-flows (not always from the gain toward loss) of nonlinear modes. However, the varying momentum coefficient Gamma(x) can modulate both unbroken linear PT-symmetric phases and stability of nonlinear modes. Particularly, the nonlinearity can excite the unstable linear mode (i.e., broken linear PT-symmetric phase) to stable nonlinear modes. Moreover, we also find stable bright solitons in the presence of non-PT-symmetric harmonic-Gaussian potential. The interactions of two bright solitons are also illustrated in PT-symmetric potentials. Finally, we consider nonlinear modes and transverse power-flows in the three-dimensional (3D) GP equation with the generalized PT-symmetric Scarf-II potential
△ Less
Submitted 10 April, 2017;
originally announced April 2017.
-
Spatial resolution measurement of Triple-GEM detector and diffraction imaging test at synchrotron radiation
Authors:
Y. L. Zhang,
H. R. Qi,
Z. W. Wen,
H. Y. Wang,
Q. Ouyang,
Y. B. Chen,
J. Zhang,
B. T. Hu
Abstract:
A triple-GEM detector with two-dimensional readout is developed. The detector provides high position resolution for powder diffraction experiments at synchrotron radiation. Spatial resolution of the detector is measured in the lab using a 55Fe X-ray source. A resolution of about 110 um FWHM is achieved. The energy resolution is better than 27% for 5.9 keV X-rays. The detector's validity under illu…
▽ More
A triple-GEM detector with two-dimensional readout is developed. The detector provides high position resolution for powder diffraction experiments at synchrotron radiation. Spatial resolution of the detector is measured in the lab using a 55Fe X-ray source. A resolution of about 110 um FWHM is achieved. The energy resolution is better than 27% for 5.9 keV X-rays. The detector's validity under illumination of photons in particular energy range is verified using a Cu X-ray tube. Imaging of the head of a wire stripper with X-ray tube demonstrates its imaging ability. A diffraction imaging experiment using the sample of powder SiO2 is successfully carried out at 1W2B laboratory of Beijing Synchrotron Radiation Facility (BSRF). Different diffraction rings are clearly seen under various X-ray energies.
△ Less
Submitted 10 February, 2017;
originally announced February 2017.
-
Transition from Solitons to Solitary Waves in the Fermi-Pasta-Ulam Lattice
Authors:
Zhenying Wen,
Jun Tao,
Nian Wei
Abstract:
In this paper, we study the smooth transition from solitons to solitary waves in localization, relation between energy and velocity, propagation and scattering property in the Fermi-Pasta-Ulam lattice analytically and numerically. A soliton is a very stable solitary wave that retains its permanent structure after interacting with other solitary waves. A soliton exists when the energy is small, and…
▽ More
In this paper, we study the smooth transition from solitons to solitary waves in localization, relation between energy and velocity, propagation and scattering property in the Fermi-Pasta-Ulam lattice analytically and numerically. A soliton is a very stable solitary wave that retains its permanent structure after interacting with other solitary waves. A soliton exists when the energy is small, and it becomes a solitary wave when the energy increases to the threshold. The transition could help to understand the distinctly different heat conduction behaviors of the Fermi-Pasta-Ulam lattice at low and high temperature.
△ Less
Submitted 30 September, 2016;
originally announced September 2016.
-
A hybrid structure gaseous detector for ion backflow suppression*
Authors:
YuLian Zhang,
HuiRong Qi,
BiTao Hu,
Hai-Yun Wang,
Qun Ou-Yang,
Yuan-Bo Chan,
Jian Zhang,
Zhi-Wen Wen
Abstract:
A new concept for a hybrid structure gaseous detector module with ion backflow suppression for the time projection chamber in a future circular collider is presented. It is a hybrid structure cascaded Gas Electron Multiplier (GEM) with a Micromegas detector. Both Micromegas and GEM have the capability to naturally reduce most of the ions produced in the amplification region. The GEM also acts as t…
▽ More
A new concept for a hybrid structure gaseous detector module with ion backflow suppression for the time projection chamber in a future circular collider is presented. It is a hybrid structure cascaded Gas Electron Multiplier (GEM) with a Micromegas detector. Both Micromegas and GEM have the capability to naturally reduce most of the ions produced in the amplification region. The GEM also acts as the preamplifer device and increases gas gain together with the Micromegas. Feasibility tests of the hybrid detector are performed using an ${}^{55}$Fe X-ray source. The energy resolution is better than 27% for 5.9 keV X-rays. It is demonstrated that a backflow ratio better than 0.2% can be reached in the hybrid readout structure at a gain of 5000.
△ Less
Submitted 31 March, 2017; v1 submitted 26 September, 2016;
originally announced September 2016.
-
Randomized Algorithms For High Quality Treatment Planning in Volumetric Modulated Arc Therapy
Authors:
Yu Yang,
Bin Dong,
Zaiwen Wen
Abstract:
In recent years, volumetric modulated arc therapy (VMAT) has been becoming a more and more important radiation technique widely used in clinical application for cancer treatment. One of the key problems in VMAT is treatment plan optimization, which is complicated due to the constraints imposed by the involved equipments. In this paper, we consider a model with four major constraints: the bound on…
▽ More
In recent years, volumetric modulated arc therapy (VMAT) has been becoming a more and more important radiation technique widely used in clinical application for cancer treatment. One of the key problems in VMAT is treatment plan optimization, which is complicated due to the constraints imposed by the involved equipments. In this paper, we consider a model with four major constraints: the bound on the beam intensity, an upper bound on the rate of the change of the beam intensity, the moving speed of leaves of the multi-leaf collimator (MLC) and its directional-convexity. We solve the model by a two-stage algorithm: performing minimization with respect to the shapes of the aperture and the beam intensities alternatively. Specifically, the shapes of the aperture are obtained by a greedy algorithm whose performance is enhanced by random sampling in the leaf pairs with a decremental rate. The beam intensity is optimized using a gradient projection method with non-monotonic line search. We further improve the proposed algorithm by an incremental random importance sampling of the voxels to reduce the computational cost of the energy functional. Numerical simulations on two clinical cancer date sets demonstrate that our method is highly competitive to the state-of-the-art algorithms in terms of both computational time and quality of treatment planning.
△ Less
Submitted 5 January, 2016; v1 submitted 7 December, 2015;
originally announced December 2015.
-
Spatial solitons and stability in self-focusing and defocusing Kerr nonlinear media with generalized PT-symmetric Scarff-II potentials
Authors:
Zhenya Yan,
Zichao Wen,
Chao Hang
Abstract:
We present a unified theoretical study of the bright solitons governed by self-focusing and defocusing nonlinear Schrodinger (NLS) equations with generalized parity-time (PT)-symmetric Scarff II potentials. Particularly, a PT-symmetric k-wavenumber Scarff II potential and a multi-well Scarff II potential are considered, respectively. For the k-wavenumber Scarff II potential, the parameter space ca…
▽ More
We present a unified theoretical study of the bright solitons governed by self-focusing and defocusing nonlinear Schrodinger (NLS) equations with generalized parity-time (PT)-symmetric Scarff II potentials. Particularly, a PT-symmetric k-wavenumber Scarff II potential and a multi-well Scarff II potential are considered, respectively. For the k-wavenumber Scarff II potential, the parameter space can be divided into different regions, corresponding to unbroken and broken PT-symmetry and the bright solitons for self-focusing and defocusing Kerr nonlinearities. For the multi-well Scarff II potential the bright solitons can be obtained by using a periodically space-modulated Kerr nonlinearity. The linear stability of bright solitons with PT-symmetric k-wavenumber and multi-well Scarff II potentials is analyzed in details using numerical simulations. Stable and unstable bright solitons are found in both regions of unbroken and broken PT-symmetry due to the existence of the nonlinearity. Furthermore, the bright solitons in three-dimensional self-focusing and defocusing NLS equations with a generalized PT-symmetric Scarff II potential are explored. This may have potential applications in the field of optical information transmission and processing based on optical solitons in nonlinear dissipative but PT-symmetric systems.
△ Less
Submitted 19 September, 2015;
originally announced September 2015.
-
Solitons in a nonlinear Schrodinger equation with PT-symmetric potentials and inhomogeneous nonlinearity: stability and excitation of nonlinear modes
Authors:
Zhenya Yan,
Zichao Wen,
Vladimir V. Konotop
Abstract:
We report branches of explicit expressions for nonlinear modes in parity-time (PT) symmetric potentials of several types. For the single-well and double-well potentials the found solutions are two-parametric and appear to be stable even when the PT-symmetry of respective underlying linear models is broken. Based on the examples of these solutions we describe an algorithm of excitation of a stable…
▽ More
We report branches of explicit expressions for nonlinear modes in parity-time (PT) symmetric potentials of several types. For the single-well and double-well potentials the found solutions are two-parametric and appear to be stable even when the PT-symmetry of respective underlying linear models is broken. Based on the examples of these solutions we describe an algorithm of excitation of a stable nonlinear mode in a model, whose linear limit is unstable. The method is based on the adiabatic change of the control parameter driving the mode along a branch bifurcating from a stable linear mode. The suggested algorithm is confirmed by extensive numerical simulations.
△ Less
Submitted 19 September, 2015;
originally announced September 2015.
-
On the Analysis of the Discretized Kohn-Sham Density Functional Theory
Authors:
Xin Liu,
Zaiwen Wen,
Xiao Wang,
Michael Ulbrich,
Yaxiang Yuan
Abstract:
In this paper, we study a few theoretical issues in the discretized Kohn-Sham (KS) density functional theory (DFT). The equivalence between either a local or global minimizer of the KS total energy minimization problem and the solution to the KS equation is established under certain assumptions. The nonzero charge densities of a strong local minimizer are shown to be bounded below by a positive co…
▽ More
In this paper, we study a few theoretical issues in the discretized Kohn-Sham (KS) density functional theory (DFT). The equivalence between either a local or global minimizer of the KS total energy minimization problem and the solution to the KS equation is established under certain assumptions. The nonzero charge densities of a strong local minimizer are shown to be bounded below by a positive constant uniformly. We analyze the self-consistent field (SCF) iteration by formulating the KS equation as a fixed point map with respect to the potential. The Jacobian of these fixed point maps is derived explicitly. Both global and local convergence of the simple mixing scheme can be established if the gap between the occupied states and unoccupied states is sufficiently large. This assumption can be relaxed if the charge density is computed using the Fermi-Dirac distribution and it is not required if there is no exchange correlation functional in the total energy functional. Although our assumption on the gap is very stringent and is almost never satisfied in reality, our analysis is still valuable for a better understanding of the KS minimization problem, the KS equation and the SCF iteration.
△ Less
Submitted 20 February, 2014;
originally announced February 2014.
-
Gradient type optimization methods for electronic structure calculations
Authors:
Xin Zhang,
Jinwei Zhu,
Zaiwen Wen,
Aihui Zhou
Abstract:
The density functional theory (DFT) in electronic structure calculations can be formulated as either a nonlinear eigenvalue or direct minimization problem. The most widely used approach for solving the former is the so-called self-consistent field (SCF) iteration. A common observation is that the convergence of SCF is not clear theoretically while approaches with convergence guarantee for solving…
▽ More
The density functional theory (DFT) in electronic structure calculations can be formulated as either a nonlinear eigenvalue or direct minimization problem. The most widely used approach for solving the former is the so-called self-consistent field (SCF) iteration. A common observation is that the convergence of SCF is not clear theoretically while approaches with convergence guarantee for solving the latter are often not competitive to SCF numerically. In this paper, we study gradient type methods for solving the direct minimization problem by constructing new iterations along the gradient on the Stiefel manifold. Global convergence (i.e., convergence to a stationary point from any initial solution) as well as local convergence rate follows from the standard theory for optimization on manifold directly. A major computational advantage is that the computation of linear eigenvalue problems is no longer needed. The main costs of our approaches arise from the assembling of the total energy functional and its gradient and the projection onto the manifold. These tasks are cheaper than eigenvalue computation and they are often more suitable for parallelization as long as the evaluation of the total energy functional and its gradient is efficient. Numerical results show that they can outperform SCF consistently on many practically large systems.
△ Less
Submitted 13 August, 2013;
originally announced August 2013.
-
On the Convergence of the Self-Consistent Field Iteration in Kohn-Sham Density Functional Theory
Authors:
Xin Liu,
Xiao Wang,
Zaiwen Wen,
Yaxiang Yuan
Abstract:
It is well known that the self-consistent field (SCF) iteration for solving the Kohn-Sham (KS) equation often fails to converge, yet there is no clear explanation. In this paper, we investigate the SCF iteration from the perspective of minimizing the corresponding KS total energy functional. By analyzing the second-order Taylor expansion of the KS total energy functional and estimating the relatio…
▽ More
It is well known that the self-consistent field (SCF) iteration for solving the Kohn-Sham (KS) equation often fails to converge, yet there is no clear explanation. In this paper, we investigate the SCF iteration from the perspective of minimizing the corresponding KS total energy functional. By analyzing the second-order Taylor expansion of the KS total energy functional and estimating the relationship between the Hamiltonian and the part of the Hessian which is not used in the SCF iteration, we are able to prove global convergence from an arbitrary initial point and local linear convergence from an initial point sufficiently close to the solution of the KS equation under assumptions that the gap between the occupied states and unoccupied states is sufficiently large and the second-order derivatives of the exchange correlation functional are uniformly bounded from above. Although these conditions are very stringent and are almost never satisfied in reality, our analysis is interesting in the sense that it provides a qualitative prediction of the behavior of the SCF iteration.
△ Less
Submitted 29 November, 2013; v1 submitted 25 February, 2013;
originally announced February 2013.
-
Nonadiabatic simulation study of photoisomerization of azobenzene: Detailed mechanism and load-resisting capacity
Authors:
Junfeng Shao,
Yibo Lei,
Zhenyi Wen,
Yusheng Dou,
Zhisong Wang
Abstract:
Nonadiabatic dynamical simulations were carried out to study cis-to-trans isomerization of azobenzene under laser irradiation and/or external mechanical loads. We used a semiclassical electron-radiation-ion dynamics method that is able to describe the coevolution of the structural dynamics and the underlying electronic dynamics in a real-time manner. It is found that azobenzene photoisomerizatio…
▽ More
Nonadiabatic dynamical simulations were carried out to study cis-to-trans isomerization of azobenzene under laser irradiation and/or external mechanical loads. We used a semiclassical electron-radiation-ion dynamics method that is able to describe the coevolution of the structural dynamics and the underlying electronic dynamics in a real-time manner. It is found that azobenzene photoisomerization occurs predominantly by an out-of-plane rotation mechanism even under a nontrivial resisting force of several tens of piconewtons. We have repeated the simulations systematically for a broad range of parameters for laser pulses, but could not find any photoisomerization event by a previously suggested in-plane inversion mechanism. The simulations found that the photoisomerization process can be held back by an external resisting force of 90 - 200 pN depending on the frequency and intensity of the lasers. This study also found that a pure mechanical isomerization is possible from the cis state if the azobenzene molecule is stretched by an external force of 1250 -1650 pN. Remarkably, the mechanical isomerization first proceeds through a mechanically activated inversion, and then is diverted to an ultrafast downhill rotation that accomplishes the isomerization. Implications of these findings to azobenzene-based nanomechanical devices are discussed.
△ Less
Submitted 10 July, 2009;
originally announced July 2009.
-
Mechanical Resonance of embedded cluster
Authors:
Zhenying Wen,
Hong Zhao
Abstract:
Embedded clusters, which are embedded in bulk materials and different from the surroundings in structures, should be common in materials. This paper studies resonance of such clusters. This work is stimulated by a recent experimental observation that some localized clusters behavior like fluid at the mesoscopic scale in many solid materials [Science in China(Series B). 46, 176 (2003)]. We argue…
▽ More
Embedded clusters, which are embedded in bulk materials and different from the surroundings in structures, should be common in materials. This paper studies resonance of such clusters. This work is stimulated by a recent experimental observation that some localized clusters behavior like fluid at the mesoscopic scale in many solid materials [Science in China(Series B). 46, 176 (2003)]. We argue that the phenomenon is just a vivid illustration of resonance of embedded clusters, driven by ubiquitous microwaves. Because the underlying mechanism is fundamental and embedded structures are usual, the phenomenon would have great significance in material physics.
△ Less
Submitted 9 November, 2004;
originally announced November 2004.
