-
Diamond-optic enhanced photon collection efficiency for sensing with nitrogen-vacancy centers
Authors:
Muhib Omar,
Andreas Conta,
Andreas Westerhoff,
Raphael Hasse,
Georgios Chatzidrosos,
Dmitry Budker,
Arne Wickenbrock
Abstract:
We present a design to increase the amount of collected fluorescence emitted by nitrogen-vacancy color centers in diamond used for quantum-sensing. An improvement was measured in collected fluorescence when comparing oppositely faced emitting surfaces by a factor of 3.8(1). This matches ray-tracing simulation results. This design therefore improves on the shot noise limited sensitivity in optical…
▽ More
We present a design to increase the amount of collected fluorescence emitted by nitrogen-vacancy color centers in diamond used for quantum-sensing. An improvement was measured in collected fluorescence when comparing oppositely faced emitting surfaces by a factor of 3.8(1). This matches ray-tracing simulation results. This design therefore improves on the shot noise limited sensitivity in optical read-out based measurements of for instance magnetic and electric fields, pressure, temperature and rotations.
△ Less
Submitted 16 January, 2023;
originally announced January 2023.
-
Fiberized diamond-based vector magnetometers
Authors:
Georgios Chatzidrosos,
Joseph Shaji Rebeirro,
Huijie Zheng,
Muhib Omar,
Andreas Brenneis,
Felix M. Stürner,
Tino Fuchs,
Thomas Buck,
Robert Rölver,
Tim Schneemann,
Peter Blümler,
Dmitry Budker,
Arne Wickenbrock
Abstract:
We present two fiberized vector magnetic-field sensors, based on nitrogen-vacancy (NV) centers in diamond. The sensors feature sub-nT/$\sqrt{\textrm{Hz}}$ magnetic sensitivity. We use commercially available components to construct sensors with a small sensor size, high photon collection, and minimal sensor-sample distance. Both sensors are located at the end of optical fibres with the sensor-head…
▽ More
We present two fiberized vector magnetic-field sensors, based on nitrogen-vacancy (NV) centers in diamond. The sensors feature sub-nT/$\sqrt{\textrm{Hz}}$ magnetic sensitivity. We use commercially available components to construct sensors with a small sensor size, high photon collection, and minimal sensor-sample distance. Both sensors are located at the end of optical fibres with the sensor-head freely accessible and robust under movement. These features make them ideal for mapping magnetic fields with high sensitivity and spatial resolution ($\leq$\,mm). As a demonstration we use one of the sensors to map the vector magnetic field inside the bore of a $\geq$ 100\,mT Halbach array. The vector field sensing protocol translates microwave spectroscopy data addressing all diamonds axes and including double quantum transitions to a 3D magnetic field vector.
△ Less
Submitted 1 March, 2021; v1 submitted 23 February, 2021;
originally announced February 2021.
-
High homogeneity permanent magnet for diamond magnetometry
Authors:
Arne Wickenbrock,
Huijie Zheng,
Georgios Chatzidrosos,
Joseph Shaji Rebeirro,
Tim Schneemann,
Peter Bluemler
Abstract:
Halbach magnets are a source of homogeneous magnetic field in an enclosed volume while keeping stray fields at a minimum. Here, we present the design, construction, and characterization for a 10 cm inner diameter double Halbach ring providing a homogeneous (<100 ppm over 1 x 1 x 0.5 cm3) magnetic field of around 105 mT, which will be used for a diamond based microwave-free widefield imaging setup.…
▽ More
Halbach magnets are a source of homogeneous magnetic field in an enclosed volume while keeping stray fields at a minimum. Here, we present the design, construction, and characterization for a 10 cm inner diameter double Halbach ring providing a homogeneous (<100 ppm over 1 x 1 x 0.5 cm3) magnetic field of around 105 mT, which will be used for a diamond based microwave-free widefield imaging setup. The final characterization is performed with a novel fiberized diamond-based sensor on a 3D translation stage documenting the high homogeneity of the constructed Halbach array and its suitability for the proposed use.
△ Less
Submitted 17 August, 2020;
originally announced August 2020.
-
Infrared laser magnetometry with a NV doped diamond intracavity etalon
Authors:
Yannick Dumeige,
Jean-François Roch,
Fabien Bretenaker,
Thierry Debuisschert,
Victor Acosta,
Christoph Becher,
Georgios Chatzidrosos,
Arne Wickenbrock,
Lykourgos Bougas,
Alexander Wilzewski,
Dmitry Budker
Abstract:
We propose an hybrid laser system consisting of a semiconductor external cavity laser associated to an intra-cavity diamond etalon doped with nitrogen-vacancy color centers. We consider laser emission tuned to the infrared absorption line that is enhanced under the magnetic field dependent nitrogen-vacancy electron spin resonance and show that this architecture leads to a compact solid-state magne…
▽ More
We propose an hybrid laser system consisting of a semiconductor external cavity laser associated to an intra-cavity diamond etalon doped with nitrogen-vacancy color centers. We consider laser emission tuned to the infrared absorption line that is enhanced under the magnetic field dependent nitrogen-vacancy electron spin resonance and show that this architecture leads to a compact solid-state magnetometer that can be operated at room-temperature. The sensitivity to the magnetic field limited by the photon shot-noise of the output laser beam is estimated to be around $250~\mathrm{fT/\sqrt{Hz}}$. Unlike usual NV center infrared magnetometry, this method would not require an external frequency stabilized laser. Since the proposed system relies on the competition between the laser threshold and an intracavity absorption, such laser-based optical sensor could be easily adapted to a broad variety of physical systems.
△ Less
Submitted 18 October, 2018;
originally announced October 2018.
-
Eddy-current imaging with nitrogen-vacancy centers in diamond
Authors:
Georgios Chatzidrosos,
Arne Wickenbrock,
Lykourgos Bougas,
Huijie Zheng,
Oleg Tretiak,
Yu Yang,
Dmitry Budker
Abstract:
We demonstrate microwave-free eddy-current imaging using nitrogen-vacancy centers in diamond. By detecting the eddy-current induced magnetic field of conductive samples, we can distinguish between different materials and shapes and identify structural defects. Our technique allows for the discrimination of different materials according to their conductivity. The sensitivity of the measurements is…
▽ More
We demonstrate microwave-free eddy-current imaging using nitrogen-vacancy centers in diamond. By detecting the eddy-current induced magnetic field of conductive samples, we can distinguish between different materials and shapes and identify structural defects. Our technique allows for the discrimination of different materials according to their conductivity. The sensitivity of the measurements is calculated as 8$\times 10 ^{5}$\,S/m\,$\sqrt[]{\textrm{Hz}}$ at 3.5\,MHz, for a cylindrical sample with radius $r_0$\,=\,1\,mm and height $h$\,=\,0.1\,mm (volume $\sim$\,0.3\,mm$^3$), at a distance of 0.5\,mm. In comparison with existing technologies, the diamond-based device exhibits a superior bandwidth and spatial resolution. In particular, we demonstrate a flat frequency response from DC to 3.5 MHz and a spatial resolution of 348\,$\pm$\,2\,$μ$m.
△ Less
Submitted 5 October, 2018;
originally announced October 2018.
-
Miniature cavity-enhanced diamond magnetometer
Authors:
Georgios Chatzidrosos,
Arne Wickenbrock,
Lykourgos Bougas,
Nathan Leefer,
Teng Wu,
Kasper Jensen,
Yannick Dumeige,
Dmitry Budker
Abstract:
We present a highly sensitive miniaturized cavity-enhanced room-temperature magnetic-field sensor based on nitrogen-vacancy (NV) centers in diamond. The magnetic resonance signal is detected by probing absorption on the 1042\,nm spin-singlet transition. To improve the absorptive signal the diamond is placed in an optical resonator. The device has a magnetic-field sensitivity of 28 pT/…
▽ More
We present a highly sensitive miniaturized cavity-enhanced room-temperature magnetic-field sensor based on nitrogen-vacancy (NV) centers in diamond. The magnetic resonance signal is detected by probing absorption on the 1042\,nm spin-singlet transition. To improve the absorptive signal the diamond is placed in an optical resonator. The device has a magnetic-field sensitivity of 28 pT/$\sqrt{\rm{Hz}}$, a projected photon shot-noise-limited sensitivity of 22 pT/$\sqrt{\rm{Hz}}$ and an estimated quantum projection-noise-limited sensitivity of 0.43 pT/$\sqrt{\rm{Hz}}$ with the sensing volume of $\sim$ 390 $μ$m $\times$ 4500 $μ$m$^{2}$. The presented miniaturized device is the basis for an endoscopic magnetic field sensor for biomedical applications.
△ Less
Submitted 7 June, 2017;
originally announced June 2017.
-
Level anti-crossing magnetometry with color centers in diamond
Authors:
Huijie Zheng,
Georgios Chatzidrosos,
Arne Wickenbrock,
Lykourgos Bougas,
Reinis Lazda,
Andris Berzins,
Florian Helmuth Gahbauer,
Marcis Auzinsh,
Ruvin Ferber,
Dmitry Budker
Abstract:
Recent developments in magnetic field sensing with negatively charged nitrogen-vacancy centers (NV) in diamond employ magnetic-field (MF) dependent features in the photoluminescence (PL) and eliminate the need for microwaves (MW). Here, we study two approaches towards improving the magnetometric sensitivity using the ground-state level anti-crossing (GSLAC) feature of the NV center at a background…
▽ More
Recent developments in magnetic field sensing with negatively charged nitrogen-vacancy centers (NV) in diamond employ magnetic-field (MF) dependent features in the photoluminescence (PL) and eliminate the need for microwaves (MW). Here, we study two approaches towards improving the magnetometric sensitivity using the ground-state level anti-crossing (GSLAC) feature of the NV center at a background MF of 102.4\,mT. Following the first approach, we investigate the feature parameters for precise alignment in a dilute diamond sample; the second approach extends the sensing protocol into absorption via detection of the GSLAC in the diamond transmission of a 1042\,nm laser beam. This leads to an increase of GSLAC contrast and results in a magnetometer with a sensitivity of 0.45\,nT/$\sqrt{\text{Hz}}$ and a photon shot-noise limited sensitivity of 12.2 pT/$\sqrt{\rm{Hz}}$.
△ Less
Submitted 24 January, 2017;
originally announced January 2017.
