Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Article type: Research Article
Authors: Li, Chuana; b; * | Valente de Oliveira, Joséb; c | Sanchez, René-Viniciob | Cerrada, Marielab; d | Zurita, Groverb | Cabrera, Diegob
Affiliations: [a] National Research Base of Intelligent Manufacturing Service, Chongqing Technology and Business University, Chongqing, China | [b] Department of Mechanical Engineering, Universidad Politécnica Salesiana, Cuenca, Ecuador | [c] CEOT, Universidade do Algarve, Faro, Portugal | [d] Control Systems Department-CEMISID, Universidad de Los Andes, Mérida, Venezuela
Correspondence: [*] Corresponding author. Chuan Li, National Research Base of Intelligent Manufacturing Service, Chongqing Technology and Business University, Chongqing 400067, China. Tel.: +86 23 6276 8469; Fax: +86 23 62769374; E-mail: [email protected].
Abstract: Detecting early faults in rolling element bearings is a crucial measure for the health maintenance of rotating machinery. As faulty features of bearings are usually demodulated into a high-frequency band, determining the informative frequency band (IFB) from the vibratory signal is a challenging task for weak fault detection. Existing approaches for IFB determination often divide the frequency spectrum of the signal into even partitions, one of which is regarded as the IFB by an individual selector. This work proposes a fuzzy technique to select the IFB with improvements in two aspects. On the one hand, an IFB-specific fuzzy clustering method is developed to segment the frequency spectrum into meaningful sub-bands. Considering the shortcomings of the individual selectors, on the other hand, three commonly-used selectors are combined using a fuzzy comprehensive evaluation method to guide the clustering. Among all the meaningful sub-bands, the one with the minimum comprehensive cost is determined as the IFB. The bearing faults, if any, can be detected from the demodulated envelope spectrum of the IFB. The proposed fuzzy technique was evaluated using both simulated and experimental data, and then compared with the state-of-the-art peer method. The results indicate that the proposed fuzzy technique is capable of generating a better IFB, and is suitable for detecting bearing faults.
Keywords: Rolling element bearing, fuzzy clustering, fuzzy comprehensive evaluation, fault detection, envelope demodulation
DOI: 10.3233/IFS-162097
Journal: Journal of Intelligent & Fuzzy Systems, vol. 30, no. 6, pp. 3513-3525, 2016
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
[email protected]
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office [email protected]
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
如果您在出版方面需要帮助或有任何建, 件至: [email protected]