Abstract
We present a Resistive Random Access Memory based Physical Unclonable Function design that gives near-ideal characteristics with high reliability when operating in extreme temperature conditions. By injecting the cells with electric currents, the resistances are much lower than they are in the pristine state and significantly vary cell-to-cell. This property can be exploited to design cryptographic key generators and create quasi-infinite possible digital fingerprints for the same array. The physical unclonable functions operate at low power, in a range that does not disturb the cells; unlike what is done by forming permanently conductive filaments, and the SET/RESET program/erase processes, this design does not modify permanently the resistance of each cell. The novelty of this architecture is to exploit the physical properties of this memory technology by forming gentle ephemeral conductive paths. We evaluate the proposed device’s performance by various stress tests on 1 kb–180 nm ReRAM Technology.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Zahoor, F., Azni Zulkifli, T.Z., Khanday, F.A.: Resistive random access memory (RRAM): an overview of materials, switching mechanism, performance, multilevel cell (MLC) storage, modeling, and applications. Nanoscale Res. Lett. 15, 90 (2020).
Zhu, Y., Cambou, B., Hely, D., Assiri, S.: Extended protocol using keyless encryption based on memristors. In: Arai, K., Kapoor, S., Bhatia, R. (eds.) SAI 2020. AISC, vol. 1230, pp. 494–510. Springer, Cham (2020). https://doi.org/10.1007/978-3-030-52243-8_36
Gao, Y., Ranasinghe, D.C.: R$^3PUF: a highly reliable memristive device based reconfigurable PUF. arXiv.org, 24 February 2017
Govindaraj, R., Ghosh, S., Katkoori, S.: Design, analysis and application of embedded resistive RAM based strong arbiter PUF. In: IEEE Transactions on Dependable and Secure Computing, vol. 17, no. 6, pp. 1232–1242, 1 November–December 2020
Liu, R., Wu, H., Pang, Y., Qian, H., Yu, S.: Experimental characterization of physical unclonable function based on 1 kb resistive random access memory arrays. IEEE Electron. Dev. Lett. 36(12), 1380–1383 (2015)
Chen, A.: Reconfigurable physical unclonable function based on probabilistic switching of RRAM. Institution of Engineering and Technology, 1 April 2015
Chen, A.: Utilizing the variability of resistive random access memory to implement reconfigurable physical unclonable functions. IEEE Electron. Dev. Lett. 36(2), 138–140 (2015)
Zhang, L., Fong, X., Chang, C.-H., Kong, Z.H., Roy, K.: Feasibility Study of Emerging Non-volatile Memory Based Physical Unclonable Functions. NUS, 3 July 2019
Cambou, B., Chipana, R., Habib, B.: PUF with dissolvable conductive paths. Patent application US201761541005P, August 2017
Chen, A., Lin, M.: Variability of resistive switching memories and its impact on crossbar array performance. In: 2011 International Reliability Physics Symposium, pp. MY.7.1–MY.7.4 (2011)
Lin, C.-L., Lin, T.-Y.: Superior Unipolar Resistive Switching in Stacked Zrox/Zro2/Zrox Structure. AIP Publishing (2016)
Yang, J.J., et al.: High Switching Endurance in Taox Memristive Devices. AIP Publishing (2010)
Fantini, A., et al.: Intrinsic switching variability in HfO2 RRAM. In: 2013 5th IEEE International Memory Workshop, pp. 30–33 (2013)
Prakash, A., Jana, D., Maikap, S.: Tao x-based resistive switching memories: prospective and challenges. Nanoscale Res. Lett. 8 (2013)
Yu, M., Devadas, S.: Secure and robust error correction for physical unclonable functions. IEEE Des. Test of Comput. 27(1), 48–65 (2010)
Cambou, B., Philabaum, C., Booher, D., Telesca, D.A.: Response-based cryptographic methods with ternary physical unclonable functions. In: Arai, K., Bhatia, R. (eds.) Advances in Information and Communication. FICC 2019. Lecture Notes in Networks and Systems, vol. 70. Springer, Cham. https://doi.org/10.1007/978-3-030-12385-7_55
Bar-El, H.: Security implications of hardware vs Software cryptographic modules (2002)
Attridge, J.: An Overview of Hardware Security Modules. SANS Institute, 05 August 2002
Herder, C., Yu, M., Koushanfar, F., Devadas, S.: Physical unclonable functions and applications: a tutorial. In: Proceedings of the IEEE, vol. 102, no. 8, pp. 1126–1141, August 2014
Yang, L., Kuegeler, C., Szot, K., Ruediger, A., Waser, R.: The Influence of Copper Top Electrodes on the Resistive Switching Effect in Tio2 Thin Films Studied by Conductive Atomic Force Microscopy. AIP Publishing, 6 July 2009
Chiu, F.-C.: A review on conduction mechanisms in dielectric films. Adv. Mater. Sci. Eng. (2014)
Schulman, A., Lanosa, L. F., Acha, C.: Poole-Frenkel Effect and VARIABLE-RANGE Hopping Conduction in Metal/Ybco Resistive Switching Devices. AIP Publishing, 28 July 2015
Fu, Y.J., et al.: Bipolar Resistive Switching Behavior of LA0.5SR0.5COO3−Σ Films for Nonvolatile Memory Applications. AIP Publishing, 2 July 2014
Kim, S., Jeong, H., Choi, S., Choi, Y.-K.: Comprehensive Modeling of Resistive Switching in the AL/TIOX/TIO2/AL Heterostructure Based on Space-Charge-Limited Conduction. Appl. Phys. Lett. 97, 033508 (2010)
Lim, E.W., Ismail, R.: Conduction Mechanism of Valence Change Resistive Switching Memory: A Survey, MDPI, 9 Sept 2015
Menzel, S., Tappertzhofen, S., Waser, R., Valov, I.: Switching kinetics of electrochemical metallization memory cells. Phys. Chem. Chem. Phys. (2013)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Wilson, T., Cambou, B., Riggs, B., Burke, I., Heynssens, J., Jo, SH. (2022). Design and Analysis of Pre-formed ReRAM-Based PUF. In: Arai, K. (eds) Intelligent Computing. SAI 2022. Lecture Notes in Networks and Systems, vol 508. Springer, Cham. https://doi.org/10.1007/978-3-031-10467-1_33
Download citation
DOI: https://doi.org/10.1007/978-3-031-10467-1_33
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-10466-4
Online ISBN: 978-3-031-10467-1
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)