Abstract
The issue of working time standardization is a key element in the process of planning, organization and control of production processes - the possibility of timely execution of orders for production orders depends on the compliance of standards with the actual time of task execution. As a consequence, establishing reliable time standards, as close as possible to the real times of individual tasks, becomes a significant challenge. This article deals with the issue of working time standardization in the process of regenerating brake calipers. In particular, the focus was on the assembly operation, analyzing unit times collected by the MES (Manufacturing Execution System) class system, and - for the purpose of comparative analysis - timing was carried out at assembly stations. As part of the conclusions, general guidelines were formulated on the method of time standardization in processes with different times of unit execution of production tasks.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Relich, M., Nielsen, I., Gola, A.: Reducing the total product cost at the product design stage. Appl. Sci. 12(4), 1921 (2022)
Juzoń, Z., Wikarek, J., Sitek, P.: The use of corporate architecture in planning and automation of production processes. In: Machado, J.M., et al. (eds.) DCAI 2022. LNNS, vol. 585, pp. 21–32. Springer, Cham (2023). https://doi.org/10.1007/978-3-031-23210-7_3
Musiał, K., Balashov, A., Burduk, A., Rysińska-Wojtasik, D.: Solving manufacturing orders scheduling problem using annealing simulation. In: Machado, J., et al. (eds.) icieng 2022. LNME, pp. 279–292. Springer, Cham (2023). https://doi.org/10.1007/978-3-031-09382-1_25
Danilczuk, W., Gola, A.: Computer-aided material demand planning using ERP systems and business intelligence technology. Appl. Comput. Sci. 16(3), 42–55 (2020)
Juzoń, Z., Wikarek, J., Sitek, P.: The concept of use of process data and enterprise architecture to optimize the production process. In: Szewczyk, R., Zieliński, C., Kaliczyńska, M., Bučinskas, V. (eds.) AUTOMATION 2023. LNNS, vol. 630, pp. 73–84. Springer, Cham (2023). https://doi.org/10.1007/978-3-031-25844-2_7
Wittbrodt, P., Łapuńka, I., Baytikenova, G., Gola, A., Zakimova, A.: Identification of the impact of the availability factor on the efficiency of production processes using the AHP and fuzzy AHP methods. Appl. Comput. Sci. 18(4), 116–129 (2022)
Burduk, A., Łapczyńska, D., Kochańska, J., Musiał, K., Więcek, D., Kuric, I.: Waste management with the use of heuristic algorithms and Internet of Things technology. Sensors 22(22), 8786 (2022)
Smutnicki, C., Pepmera, J., Bocewicz, G., Banaszak, Z.: Cyclic flow-shop scheduling with no-wait constraints and missing operations. Eur. J. Oper. Res. 302(1), 39–49 (2022)
Grzelak, M., Borucka, A., Guzanek, P.: Application of linear regression for evaluation of production processes effectiveness. In: Machado, J., Soares, F., Trojanowska, J., Ivanov, V. (eds.) icieng 2021. LNME, pp. 36–47. Springer, Cham (2022). https://doi.org/10.1007/978-3-030-78170-5_4
Paśko, Ł., Antosz, K.: Neural model of manufacturing process as a way to improve predictability of manufacturing. In: Gapiński, B., Ciszak, O., Ivanov, V. (eds.) MANUFACTURING 2022. LNME, pp. 24–38. Springer, Cham (2022). https://doi.org/10.1007/978-3-031-00805-4_3
Sobaszek, Ł., Gola, A., Świć, A.: The algorithms for robust scheduling of production jobs under machine failure and variable technological operation times. In: Machado, J., Soares, F., Trojanowska, J., Ivanov, V. (eds.) icieng 2021. LNME, pp. 56–67. Springer, Cham (2022). https://doi.org/10.1007/978-3-030-78170-5_6
Jasiulewicz-Kaczmarek, M., Antosz, K., Zhang, C., Ivanov, V.: Industry 4.0 technologies for sustainable asset life cycle management. Sustainability 15(7), 5833 (2023)
Kanski, L., Pizon, J.: The impact of selected components of Industry 4.0 on project management. J. Innov. Knowl. 8(1), 100336 (2023)
Pizoń, J., Gola, A.: The meaning and directions of development of personalized production in the era of Industry 4.0 and Industry 5.0. In: Machado, J., et al. (eds.) icieng 2022. LNME, pp. 1–13. Springer, Cham (2023). https://doi.org/10.1007/978-3-031-09360-9_1
Kaczmarczyk, V., et al.: Revisiting the role of manufacturing execution systems in Industry 4.0. IFAC PapersOnLine 55(4), 151–157
https://corsosystems.com/manufacturing-execution-systems-guide. Accessed 23 Apr 2023
Shojaeinasab, A., et al.: Intelligent manufacturing execution systems: a systematic review. J. Manuf. Syst. 62, 503–522 (2022)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Wójcik, Ł., Gola, A. (2023). Working Time Standardization in the Assembly Process of Regenerated Elements Using MES System and Timing Method. In: Mehmood, R., et al. Distributed Computing and Artificial Intelligence, Special Sessions I, 20th International Conference. DCAI 2023. Lecture Notes in Networks and Systems, vol 741. Springer, Cham. https://doi.org/10.1007/978-3-031-38318-2_5
Download citation
DOI: https://doi.org/10.1007/978-3-031-38318-2_5
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-38317-5
Online ISBN: 978-3-031-38318-2
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)