Abstract
This paper proposes development of a force leverage mechanism based on the flexure hinges. The primary function of this leverage mechanism is to transform an objective unbalance force/moment to a force sensor in the static unbalance measure system. The measure precision is dependent on the linearity of the force transmission of the force leverage mechanism. The kinematics of the force leverage mechanism is modeled based on the elastic model. The finite element method is used to verify the analytical solutions. Moreover, the effect of the initial external load on the linearity is investigated. Further, the virtual experiment is carried on to verify the linearity and sensitivity. The static unbalance measure system employing the proposed leverage mechanism has the advanced sensitivity of less than 0.03 gcm and performs excellent linearity.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Meng, Q., Berselli, G., Vertechy, R., Castelli, V.P.: An improved method for designing flexure-based nonlinear springs (2015)
Beroz, J., Awtar, S., John Hart, a: Extensible-link kinematic model for characterizing and optimizing compliant mechanism motion. J. Mech. Des. 136(3), 31008 (2014)
Sun, X., Chen, W., Fatikow, S., et al.: A novel piezo-driven microgripper with a large jaw displacement. Microsyst. Technol. 21(4), 931–942 (2015)
Lee, V.D., Gibert, J.M., Ziegert, J.C.: Hybrid bi-directional flexure joint. Precis. Eng. 38(2), 270–278 (2014)
Lum, G.Z., Teo, T.J., Yang, G., Yeo, S.H., Sitti, M.: Integrating mechanism synthesis and topological optimization technique for stiffness-oriented design of a three degrees-of-freedom flexure-based parallel mechanism. Precis. Eng. 39, 125–133 (2015)
Xu, Q.: Design of a large-range compliant rotary micropositioning stage with angle and torque sensing. IEEE Sens. J. 15(4), 2419–2430 (2015)
Xu, Q.: Robust impedance control of a compliant microgripper for high-speed position/force regulation. IEEE Trans. Ind. Electron. 62(2), 1201–1209 (2015)
Zhang, D., Zhang, Z., Gao, Q., Xu, D., Liu, S.: Development of a monolithic compliant SPCA-driven micro-gripper. Mechatronics 25, 37–43 (2015)
Jayanth, G.R., Menq, C.H.: Design and modeling of an active five-axis compliant micromanipulator. J. Mech. Robot. 6(4), 41014 (2014)
Rubbert, L., Caro, S., Gangloff, J., Renaud, P.: Using singularities of parallel manipulators to enhance the rigid-body replacement design method of compliant mechanisms. J. Mech. Des. 136(5), 051010 (2014)
Clark, L., Shirinzadeh, B., Tian, Y., et al.: Development of a passive compliant mechanism for measurement of micro/nanoscale planar 3-DOF motions. IEEE/ASME Trans. Mechatron. 21(3), 1222–1232 (2016)
Kim, K., Lee, J., Ju, J., Kim, D.-M.: Compliant cellular materials with compliant porous structures: a mechanism based materials design. Int. J. Solids Struct. 51(23–24), 3889–3903 (2014)
Yao, Q., Dong, J., Ferreira, P.M.: A novel parallel-kinematics mechanisms for integrated, multi-axis nanopositioning. Part 1. Kinematics and design for fabrication. Precis. Eng. 32(1), 7–19 (2008)
Li, Y., Wu, Z.: Design, analysis and simulation of a novel 3-DOF translational micromanipulator based on the PRB model. Mech. Mach. Theory 100, 235–258 (2016)
Luo, Y., Liu, W., Wu, L.: Analysis of the displacement of lumped compliant parallel-guiding mechanism considering parasitic rotation and deflection on the guiding plate and rigid beams. Mech. Mach. Theory 91, 50–68 (2015)
Friedrich, R., Lammering, R.: Flexure hinge mechanisms modeled by nonlinear euler-bernoulli-beams. PAMM 15(1), 193–194 (2015)
Hebert, M.H., Thorpe, C.E., Stentz, A. (eds.): Intelligent Unmanned Ground Vehicles: Autonomous Navigation Research at Carnegie Mellon, vol. 388. Springer Science & Business Media, Heidelberg (2012)
Boynton, R., Wiener, P.K., Kennedy, P., Rathbun, B., Engineer, A.C.: Static balancing a device with two or more degrees of freedom–(The Key to Obtaining High Performance On Gimbaled Missile Seekers). In: The 62nd Annual Conference of Society of Allied Weight Engineers, Inc. (2003)
Yan, W.X., Zhan, S.T., Qian, Z.Y., Fu, Z., Zhao, Y.Z.: Design of a measurement system for use in static balancing a two-axis gimbaled antenna. Proc. Inst. Mech. Eng. Part G: J. Aerosp. Eng. 228(13), 2530–2541 (2014)
Acknowledgment
This work was supported by the National Science of China Foundation (No. 51475305).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing AG
About this paper
Cite this paper
Liu, J., Guan, E., Li, P., Yan, W., Zhao, Y. (2017). Linearity of the Force Leverage Mechanism Based on Flexure Hinges. In: Huang, Y., Wu, H., Liu, H., Yin, Z. (eds) Intelligent Robotics and Applications. ICIRA 2017. Lecture Notes in Computer Science(), vol 10464. Springer, Cham. https://doi.org/10.1007/978-3-319-65298-6_48
Download citation
DOI: https://doi.org/10.1007/978-3-319-65298-6_48
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-65297-9
Online ISBN: 978-3-319-65298-6
eBook Packages: Computer ScienceComputer Science (R0)