Abstract
In this paper the results of research are shown in which the response surface was applied with central composite design for estimating the values of flatness as shown and accepted by the quality department and production company of the Caribbean region, taking into account factors such as voltage control in the winding sheet and the coefficient of friction. Initially, a first-order model was proposed to estimate the variance of the error and consider a quantitative model that takes into account the effects of combination. The method of steepest descent is used to sequentially move the descent path, i.e., in the direction of the minimum response decrement, until a new interval near optimal experimentation. Subsequently, a model of higher order was developed using a central composite design with center points and stars, taking into account control other variables additional response flatness, such as the roughness and hardness of the sheets in a range of flexible and acceptable tolerances for the company through a canonical model, and that will be the focus of future research.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Roberts, W.L.: Cold Rolling of Steel. M. Dekker, New York (1978)
Gjønnes, L.: Metall. Mater. Trans. A, 27A, 2338 (1996)
Ahmed, R.Y., Sutcliffe, M.P.F.: Wear 244, 60 (2000)
Abdelkhalek, S., Montmitonnet, P., Legrand, N., Buessler, P.: Coupled approach for flatness prediction in cold rolling of thin strip. Int. J. Mech. Sci. 53, 661–675 (2011)
Bemporad, A., Bernardini, D., Cuzzola, A.F., Spinelli, A.: Optimization-based automatic flatness control in cold tandem rolling. J. Process Control 20, 396–407 (2010)
Pin, G., Francesconi, V., Cuzzola, F.A., Parisini, T.: Adaptive task-space metal strip-flatness control in cold multi-roll mill stands. J. Process Control 23, 108–119 (2013)
Wang, P.F., Yan, P., Liu, H.M., Zhang, D.H., Wang, J.S.: Actuator efficiency adaptive flatness control model and its application in 1250 mm reversible cold strip mill. J. Iron. Steel Res. Int. 20, 13–20 (2013)
Liu, H.M., Shan, X.Y., Jia, C.Y.: Theory-intelligent dynamic matrix model of flatness control for cold rolled strips. J. Iron. Steel Res. Int. 20, 1–7 (2013)
Tran, D.C., Tardif, N., Limam, A.: Experimental and numerical modeling of flatness defects in strip cold rolling. Int. J. Solids Struct. 69, 343–349 (2015)
Weisz-Patrault, D.: Inverse cauchy method with conformal mapping: application to latent flatness defect detection during rolling process. Int. J. Solids Struct. 56, 175–193 (2015)
Beik, H.A.A., Dehghani, K.: Irregularity in Friction Hills during the Cold Rolling of Materials. Department of Mining and Metallurgical Engineering, Amirkabir University of Technology (2014)
Montgomery, D.: Diseño y Análisis de Experimentos. In: Douglas, C. Grupo Editorial Iberoamerica (2002)
Mullen, K., Ennis, D.M.: Rotatable design in product development. Food Tech. 33, 74–80 (1979)
Viloria, A.: Methodology to increase the adaptability and flexibility of the supply chain of automotive company through lean manufacturing. Adv. Sci. Lett. 21(5), 1517–1520 (2005)
Acknowledgment
To the Universidad de la Costa and the Universidad Libre Seccional Barranquilla, especially the GIDE research group, for making this research possible.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG, part of Springer Nature
About this paper
Cite this paper
Parody, A. et al. (2018). Application of a Central Design Composed of Surface of Response for the Determination of the Flatness in the Steel Sheets of a Colombian Steel. In: Tan, Y., Shi, Y., Tang, Q. (eds) Data Mining and Big Data. DMBD 2018. Lecture Notes in Computer Science(), vol 10943. Springer, Cham. https://doi.org/10.1007/978-3-319-93803-5_69
Download citation
DOI: https://doi.org/10.1007/978-3-319-93803-5_69
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-93802-8
Online ISBN: 978-3-319-93803-5
eBook Packages: Computer ScienceComputer Science (R0)