Abstract
The high-speed wire electrical discharge machining (WEDM-HS) machine has been more and more favoured by customers for the low manufacturing cost, the degree of automation and the advantages over the WEDM-LS in price performance ratio. However, the processing quality (the precision of form and position and the surface quality) of WEDM-HS is poorer than that of WEDM-LS, and the processing quality is one of the main technical indicators of WEDM. There are many factors on the processing quality of WEDM-HS, the effects of non-electrical parameters, including the machine precision, the wire-moving system and wire-moving way of the wire electrode and the working solution, on the processing quality of WEDM-HS are discussed, and the corresponding measures of improving the processing quality are put forward, which provide the sufficient basis for further improving the processing quality of WEDM-HS.
Chapter PDF
Similar content being viewed by others
References
Li, M.H.: Theoretical basis of EDM (In Chinese). National Defence Industry, Beijing (1989)
Li, M.H.: The Research Status and Development Trend of Electric Discharge Wire-cutting Technology. Die and Mould Technology (6), 49–52 (2002)
Guo, L.E., Liu, Z.X., Xing, X.F.: Study on dynamic stability of multiple cut on machine tool in HS WEDM. Electromachining (6), 22–25 (1999)
Li, M.Q., Li, M.H., Xiong, G.Y.: Study on the Variations of Form and Position of the Wire Electrode in WEDM-HS. International Journal of Advanced Manufacturing Technology 5(9), 929–934 (2005)
Xia, W.F.: Electric Sparkle Cutting Bad Reasons for Product Quality and Prevention. Equipment Manufacturing Technology (7), 178–182 (2009)
Liu, Z.D.: Technology Research of WEDM Using Composite Cooling Liquid. Electromachining & Mould (12), 24–30 (2008)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2011 IFIP International Federation for Information Processing
About this paper
Cite this paper
Xiong, G., Zheng, M., Li, D., Zhao, L., Wang, Y., Li, M. (2011). Study on the Influence of Non-electrical Parameters on Processing Quality of WEDM-HS and Improvement Measures. In: Li, D., Liu, Y., Chen, Y. (eds) Computer and Computing Technologies in Agriculture IV. CCTA 2010. IFIP Advances in Information and Communication Technology, vol 347. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-18369-0_61
Download citation
DOI: https://doi.org/10.1007/978-3-642-18369-0_61
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-18368-3
Online ISBN: 978-3-642-18369-0
eBook Packages: Computer ScienceComputer Science (R0)