Abstract
Many forms of actuators have been developed with the capability of braking. Most of these braking mechanisms involve numerous mechanical components, that wear with time and lose precision, furthermore the mechanism are difficult to scale down in size while maintaining relatively large holding torques. In this paper, we propose the use of an off-the-shelf economic material, Hot-Melt-Adhesive (HMA), as a brake mechanism. HMA exhibits visco-elastic characteristics and has interesting properties as it can change phases from solid to plastic to liquid and vice versa. Its advantage is that it is reusable and durable. Experiments were performed to display the holding strength as well as the HMAs visco-elasticity in its solid state as a brake mechanism. The HMA requires no constant application of power when solid, and acts as a brake and visco-elastic damper depending on temperature. Results show that HMA can add compliance and high torque braking of joints.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
Pocius, A.: Physical properties of polymers. In: Chemistry and Materials Science, Springerlink, Part V, pp. 479–486 (2007)
Li, W., Bouzidi, L., Narine, S.S.: Current research and development status and prospect of Hot-Melt-Adhesives: A Review. Ind. Eng. Chem. Res. 47, 7524–7532 (2008)
Wright, P.K., Cutkosky, M.R.: Handbook of industrial robotics, pp. 91–111. John Wiley and Sons (1985)
Llievski, F., Mazzeo, A., Shepherd, R.F., Chen, X., Whitesides, G.M.: Soft robotics for chemists. Angewandte Chemie 50, 1890–1895 (2011)
Bark, C., Binnenbose, T., Vogele, G., Weisener, T., Widmann, M.: Gripping with low viscosity fluid. In: 11th International Workshop on Micro Electro Mechanical Systems, Heidelberg, Germany, January 25-29, pp. 301–305. IEEE Press (1998)
Gerberich, W.W., Cordill, M.J.: Physics of adhesion. Rep. Prog. Phys. 69, 2157–2203 (2006)
Park, Y.-J., Joo, H.-S., Kim, H.-J., Lee, Y.-K.: Adhesion and rheological properties of EVA-based Hot-Melt-Adhesives. Int. J. Adhesion Adhesives 26, 571–576 (2006)
Rathmann, S., Raatz, A., Hesselbach, J.: Active gripper for hot melt joining of micro components. In: Ratchev, S. (ed.) IPAS 2010. IFIP AICT, vol. 315, pp. 191–198. Springer, Heidelberg (2010)
Osakabe, Y., Kikuchi, K., Tomita, H., Saito, Y.: Detachable actuator using induction heating and thermalplastic adhesive. In: Int. Conf. on Elect. Machines and Sys. (ICEMS), Tokyo, pp. 1–6 (2009)
Osswald, M., Iida, F.: A Climbing robot based on Hot Melt Adhesion (HMA). In: IEEE/RSJ Int. Conference on Intelligent Robots and Systems (IROS 2011) (2011)
Conti, F., Khatib, O.: A New Approach for haptic interface design. The International Journal of Robotics Research 28(6), 834–848 (2009)
Goldfarth, M., Durfee, W., Korkowski, K., Harrold, B.: Evaluation of a controlled-brake orthosis for FES-Aided gait. IEEE Trans. Neural Syst. Rehab. Eng. 11(3), 241–248 (2003)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2011 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Gunura, K., Bocanegra, J., Iida, F. (2011). Design and Control of a Novel Visco-elastic Braking Mechanism Using HMA. In: Jeschke, S., Liu, H., Schilberg, D. (eds) Intelligent Robotics and Applications. ICIRA 2011. Lecture Notes in Computer Science(), vol 7101. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-25486-4_42
Download citation
DOI: https://doi.org/10.1007/978-3-642-25486-4_42
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-25485-7
Online ISBN: 978-3-642-25486-4
eBook Packages: Computer ScienceComputer Science (R0)