Abstract
Vertical cavity surface emitting lasers (VCSELs) are broadly applied in optical communication, optical interconnection, optical information processing, and optical integrated system. Therefore, diagnosing the output power of VCSEL is of great importance from the point of application view. Traditional approaches to diagnose the output power are by the rate equation, which is easily interfered by zero-value samples. Such model is capable of capturing the relationship between the laser output power intensity and the device temperature. However, those methods may over-fitting and fall into local optimum in the fitting process. In this paper, we propose an advanced model to address these limitations. Specifically, our model adds Rectified Linear Unit (ReLU) and weight parameters to reduce the zero-value interference. Moreover, the adaptive moment estimation (Adam) algorithm is employed to learn parameters in the model, and the L2-norm is taken into consideration to prevent overfitting. The experimental results show that proposed model outperforms the base model significantly, and can be used for diagnosing VCSEL’s power output. The mean squared error (MSE) of our model is 0.0815. The Mean Absolute Percentage Error (MAPE) is 20.72%, which is 22.29% lower than the base model.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Nakwaski, W., et al.: Self-consistent thermal-electrical modeling of proton-implanted top-surface emitting semiconductor lasers. In: OE/LASE 1994 International Society for Optics and Photonics, pp. 365–387 (1994)
Michalzik, R., Ebeling, K.J.: Modeling and design of proton-implanted ultralow-threshold vertical-cavity laser diodes. IEEE J. Quantum Electron. 29(6), 1963–1974 (1993)
Nakwaski, W.: Thermal aspects of efficient operation of vertical-cavity surface-emitting lasers. Opt. Quantum Electron. 28(4), 335–352 (1996)
Osinski, M., et al.: Thermal effects in vertical-cavity surface-emitting lasers. Int. J. High Speed Electron. Syst. 05(04), 667–730 (1994)
Cartledge, J.C.: DFB laser rate equation parameters-for system simulation purposes. J. Lightwave Technol. 15(5), 852–860 (1997)
Ramunno, L., Sipe, J.E.: Dynamical model of directly modulated semiconductor laser diodes. IEEE J. Quanturn Electron. 35(4), 624–634 (1999)
Luo, Y., Sun, C.Z., et al.: Analysis of gain and index coupling coefficients of DFB semiconductor lasers using a practical model. Int. J. Optoelectron. 10(5), 331–335 (1995)
Jakobsen, K.B., et al.: FM modulation response model of direct modulated buried heterostructure semiconductor lasters. Opt. Commun. 82(5–6), 456–460 (1991)
Tucker, R.S.: High-speed modulation of semiconductor laser. J. Lightwave Technol. 3(7), 1180–1192 (1985)
Yu, S.F., et al.: Theoretical analysis of modulation response and second—order harmonic distortion in vertical cavity surface—emitting lasers. IEEE J. Quantum Electron. 32, 2139–2147 (1996)
Entezam, S., et al.: Thermal equivalent circuit model for coupled-cavity surface-emitting lasers. IEEE J. Quantum Electron. 51(4), 2400108 (2015)
Hangauer, A., et al.: Vertical-cavity surface-emitting laser light-current characteristic at constant internal temperature. IEEE Photonics Technol. Lett. 23(18), 1295–1297 (2011)
Morozov, V.N., et al.: Analysis of vertical-cavity surface—emitting laser multimode behavior. IEEE J. Quantum Electron. 01, 980–988 (1997)
Su, Y., et al.: Circuit model for studying temperature effects on vertical-cavity surface—emitting laser. In: Proceedings of IEEE LEOS (Lasers and Electro—Optics Society) Annual Meeting, vol. 01, pp. 215–216 (1996)
Wipiejewski, T., et al.: Size-dependent output power saturation of vertical-cavity surface-emitting laser diodes. IEEE Photonics Technol. Lett. 8(1), 10–12 (1996)
Mena, P.V., et al.: A simple rate-equation-based thermal VCSEL model. J. Lightwave Technol. 17(5), 865–872 (1999)
Mena, P.V., et al.: A comprehensive circuit-level model of vertical-cavity surface-emitting lasers. J. Lightwave Technol. 17(12), 2612–2632 (1999)
Daubenschüz, M., et al.: Efficient experimental analysis of internal temperatures in VCSELs. In: Proceedings of Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference, Munich. IEEE (2017)
Suzuki, N., et al.: High speed 1.1-µm-range InGaAs-based VCSELs. IEICE Trans. Electron. 92(7), 942–950 (2009)
Kingma, D., et al.: Adam: A method for stochastic optimization, arXiv preprint arXiv:1412.6980 (2014)
Author information
Authors and Affiliations
Corresponding authors
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Wang, L., Chen, W. (2020). A Rectified Linear Unit Model for Diagnosing VCSEL’s Power Output. In: He, J., et al. Data Science. ICDS 2019. Communications in Computer and Information Science, vol 1179. Springer, Singapore. https://doi.org/10.1007/978-981-15-2810-1_46
Download citation
DOI: https://doi.org/10.1007/978-981-15-2810-1_46
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-2809-5
Online ISBN: 978-981-15-2810-1
eBook Packages: Computer ScienceComputer Science (R0)