Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Skip to main content

Advertisement

Springer Nature Link
Log in

Costs, benefits, and adoption of additive manufacturing: a supply chain perspective

  • ORIGINAL ARTICLE
  • Published:
The International Journal of Advanced Manufacturing Technology Aims and scope Submit manuscript

Abstract

There are three primary aspects to the economics of additive manufacturing: measuring the value of goods produced, measuring the costs and benefits of using the technology, and estimating the adoption and diffusion of the technology. This paper provides an updated estimate of the value of goods produced. It then reviews the literature on additive manufacturing costs and identifies those instances in the literature where this technology is cost-effective. The paper then goes on to propose an approach for examining and understanding the societal costs and benefits of this technology both from a monetary viewpoint and a resource consumption viewpoint. The final section discusses the trends in the adoption of additive manufacturing. Globally, there is an estimated $667 million in value added produced using additive manufacturing, which equates to 0.01 % of total global manufacturing value added. US value added is estimated as $241 million. Current research on additive manufacturing costs reveals that it is cost-effective for manufacturing small batches with continued centralized production; however, with increased automation distributed production may become cost-effective. Due to the complexities of measuring additive manufacturing costs and data limitations, current studies are limited in their scope. Many of the current studies examine the production of single parts and those that examine assemblies tend not to examine supply chain effects such as inventory and transportation costs along with decreased risk to supply disruption. The additive manufacturing system and the material costs constitute a significant portion of an additive manufactured product; however, these costs are declining over time. The current trends in costs and benefits have resulted in this technology representing 0.02 % of the relevant manufacturing industries in the USA; however, as the costs of additive manufacturing systems decrease, this technology may become widely adopted and change the supplier, manufacturer, and consumer interactions. An examination in the adoption of additive manufacturing reveals that for this technology to exceed $4.4 billion in 2020, $16.0 billion in 2025, and $196.8 billion in 2035, it would need to deviate from its current trends of adoption.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
$34.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Allen J (2006) An investigation into the comparative costs of additive manufacture vs. machine from solid for aero engine parts. Retrieved 2014-06-07, from http://www.dtic.mil/dtic/tr/fulltext/u2/a521730.pdf

  2. Atzeni E, Luca I, Allessandro S (2011) “On the Competitiveness of Additive Manufacturing for the Production of Metal Parts.” 9th International Conference on Advanced Manufacturing Systems and Technology.

  3. American Automobile Association (2014) “Your Driving Costs”. (Heathrow, FL: Annual Issues). <http://www.aaapublicaffairs.com>

  4. Atzeni E, Iuliano L, Minetola P, Salmi A (2010) Redesign and Cost Estimation of Rapid Manufactured Plastic Parts. Rapid Prototyp J 16(5):308–17

    Article  Google Scholar 

  5. Atzeni E, Salmi A (2012) Economics of Additive Manufacturing for End-Usable Metal Parts. Int J Adv Manuf Technol 62(9-12):1147–55

    Article  Google Scholar 

  6. Baldinger M, Duchi A (2013) Price Benchmark of Laser Sintering Service Providers. In: In High Value Manufacturing: Advanced Research in Virtual and Rapid Prototyping: Proceedings of the 6th International Conference on Advanced Research in Virtual and Rapid Prototyping, Leiria, Portugal, 1-5 October, 2013, 37. CRC Press, Leiria, Portugal

    Google Scholar 

  7. Baumers M (2012) “Economic Aspects of Additive Manufacturing: Benefits, Costs and Energy Consumption”

  8. Baumers MC, Tuck R. Wildman I. Ashcroft E, Rosamond RH (2012) “Combined Buildtime, Energy Consumption and Cost Estimation for Direct Metal Laser Sintering.” In 23rd Annual International Solid Freeform Fabrication Symposium–An Additive Manufacturing Conference, Austin/TX/USA, 6th–8th August.

  9. Baumers M, Tuck C, Wildman R, Ashcroft I, Rosamond E, Hague R (2013) Transparency Built-in Energy Consumption and Cost Estimation for Additive Manufacturing. J Ind Ecol 17(3):418–31. doi:10.1111/j.1530-9290.2012.00512.x

    Article  Google Scholar 

  10. Bureau of Labor Statistics. Occupational Employment Statistics. <http://www.bls.gov/oes/>

  11. Bureau of Transportation Statistics. National Transportation Statistics: Table 3-17: Average Cost of Owning and Operating an Automobile. <http://www.rita.dot.gov/bts/sites/rita.dot.gov.bts/files/publications/national_transportation_statistics/html/table_03_17.html>

  12. Chapman R (2001) “Benefits and costs of research: a case study of construction systems integration and automation technologies in commercial buildings.” NISTIR 6763. National Institute of Standards and Technology.

  13. Dornbusch R, Fischer S, Startz R (2000) Macroeconomics, 8th edn. McGraw-Hill, London, UK

    Google Scholar 

  14. Economist (2010) “Printing Body Parts: Making a Bit of Me.” http://www.economist.com/node/15543683

  15. GizMag. “3D Bio-printer to create arteries and organs.” <http://www.gizmag.com/3d-bio-printer/13609/>

  16. T. A. Grimm & Associates, Inc (2010) 3D Printer Benchmark: North, Americanth edn. T. A. Grimm & Associates, Inc., Edgewood, KY

    Google Scholar 

  17. Holmström J, Partanen J, Tuomi J, Walter M (2010) Rapid Manufacturing in the Spare Parts Supply Chain: Alternative Approaches to Capacity Deployment. J Manuf Technol Manag 21(6):687–97. doi:10.1108/17410381011063996

    Article  Google Scholar 

  18. Hopkinson N (2006) Production Economics of Rapid Manufacture. An Industrial Revolution for the Digital Age, In Rapid Manufacturing, pp 147–57

    Book  Google Scholar 

  19. Hopkinson N, Dickens P (2003) Analysis of Rapid Manufacturing—using Layer Manufacturing Processes for Production. Proc Inst Mech Eng C J Mech Eng Sci 217(1):31–39

    Article  Google Scholar 

  20. Huang SH, Liu P, Mokasdar A, Liang H (2013) Additive Manufacturing and Its Societal Impact: A Literature Review. Int J Adv Manuf Technol 67(5-8):1191–1203. doi:10.1007/s00170-012-4558-5

    Article  Google Scholar 

  21. Khajavi SH, Partanen J, Holmström J (2014) Additive Manufacturing in the Spare Parts Supply Chain. Comput Ind 65(1):50–63

    Article  Google Scholar 

  22. Kim B. “Supply Chain Management: A Learning Perspective.” Korea Advanced Institute of Science and Technology. Coursera Lecture 1-2.

  23. Kim B, Park C (2013) Firms’ Integrating Efforts to Mitigate the Tradeoff Between Controllability and Flexibility. Int J Prod Res 51(4):1258–1278

    Article  Google Scholar 

  24. Li F (2005) “Automated Cost Estimation for 3-Axis CNC Milling and Stereolithography Rapid Phototyping.” http://mspace.lib.umanitoba.ca/jspui/handle/1993/8882.

  25. Lindemann C, Jahnke U, Moi M, Koch R (2012) In 23rd Annual International Solid Freeform Fabrication Symposium–An Additive Manufacturing Conference, Austin/TX/USA, 6th–8th August. TX, Austin, “Analyzing Product Lifecycle Costs for a Better Understanding of Cost Drivers in Additive Manufacturing”

    Google Scholar 

  26. Lindemann C, Jahnke U, Moi M, Koch R (2013) In 24th Annual International Solid Freeform Fabrication Symposium–An Additive Manufacturing Conference. Austin, TX, Austin/TX/USA., “Impact and Influence Factors of Additive Manufacturing on Product Lifecycle Costs”

    Google Scholar 

  27. Mansfield E (1995) Innovation, Technology and the Economy: Selected Essays of Edwin Mansfield. Economists of the Twentieth Century Series (Brookfield, VT, E. Elgar).

  28. National Accounts Main Aggregates Database. United Nations Statistics Division. <http://unstats.un.org/unsd/snaama/Introduction.asp>

  29. Neef A, Burmeister K, Krempl S (2005) Vom Personal Computer zum Personal Fabricator (From Personal Computer to Personal Fabricator). Murmann Verlag, Hamburg

    Google Scholar 

  30. Rickenbacher L, Spierings A, Wegener K (2013) An Integrated Cost-Model for Selective Laser Melting (SLM). Rapid Prototyp J 19(3):208–14

    Article  Google Scholar 

  31. Ruffo M, Hague R (2007) Cost Estimation for Rapid Manufacturing-Simultaneous Production of Mixed Components Using Laser Sintering. Proc Inst Mech Eng B J Eng Manuf 221(11):1585–91

    Article  Google Scholar 

  32. Ruffo M, Tuck C, Hague R (2006) Cost Estimation for Rapid Manufacturing-Laser Sintering Production for Low to Medium Volumes. Proc Inst Mech Eng B J Eng Manuf 220(9):1417–27

  33. Son YK (1991) “A cost estimation model for advanced manufacturing systems.” Int J Prod Res 29(3):441–452

  34. Thomas D (2013) Economics of the U.S. Additive Manufacturing Industry. NIST Special Publication 1163. Gaithersburg, MD: U.S. Dept. of Commerce, National Institute of Standards and Technology. doi:10.6028/NIST.SP.1163

  35. Thomas Douglas S (2014) The US Manufacturing Value Chain: An International Perspective. NIST Technical Note 1810. <http://www.nist.gov/customcf/get_pdf.cfm?pub_id=914022>

  36. Wohlers T (2012) “Wohlers Report 2012: Additive Manufacturing and 3D Printing State of the Industry.” Wohlers Associates, Inc.

  37. Wohlers T (2014) “Wohlers Report 2014: Additive Manufacturing and 3D Printing State of the Industry.” Wohlers Associates, Inc.

  38. Zhang Y, Bernard A (2013) “Generic Build Time Estimation Model for Parts Produced by SLS.” In High Value Manufacturing: Advanced Research in Virtual and Rapid Prototyping: Proceedings of the 6th International Conference on Advanced Research in Virtual and Rapid Prototyping, Leiria, Portugal, 1-5 October, 2013

Download references

Author information

Authors and Affiliations

  1. National Institute of Standards and Technology, Gaithersburg, MD, USA

    Douglas Thomas

Authors
  1. Douglas Thomas
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Douglas Thomas.

Ethics declarations

Disclaimer

Certain trade names and company products are mentioned in the text in order to adequately specify the technical procedures and equipment used. In no case does such identification imply recommendation or endorsement by the National Institute of Standards and Technology, nor does it imply that the products are necessarily the best available for the purpose.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Thomas, D. Costs, benefits, and adoption of additive manufacturing: a supply chain perspective. Int J Adv Manuf Technol 85, 1857–1876 (2016). https://doi.org/10.1007/s00170-015-7973-6

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00170-015-7973-6

Keywords

Search

Navigation