Abstract
Engineering rock mass classification is usually the first stage in the analysis and characterization of rock slopes. However, when dealing with sedimentary/heterogeneous rock masses, the use of existing classification methods can be difficult and often misleading, especially when used to define rockfall risk areas and appropriate slope mitigation works. In this research, we describe a novel approach for geomechanical rock slope analysis based on the combined use of remote sensing, geographic information systems (GIS), and the Slope Mass Rating (SMR) classification system. The Montagna dei Fiori area (Italian central Apennines), which is characterized by the sedimentary rocks of the Umbria Marche heterogeneous succession, is used as a case study to demonstrate the application of the proposed approach. Conventional geomechanical scanlines are integrated with photogrammetric techniques to increase the amount of data collected, especially in inaccessible areas. In particular, a new fast and low-cost method of georeferencing 3D photogrammetric models is presented. GIS are used to manage all the data acquired using remote sensing techniques and geomechanical analyses, and a semi-automatic tool developed to allow calculation of the SMR along a major highway, the SP52, which crosses the study area. Finally, a modification of the SMR procedure is proposed to enable definition of the most appropriate mitigation works in folded heterogeneous sedimentary rock masses comprising alternating marls and limestones.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.References
Abruzzi Regione open data (2018) Available online at: http://opendata.regione.abruzzo.it/opendata/Modello_digitale_del_terreno_risoluzione_10x10_metri
Agisoft (2018) PhotoScan (version 1.4). Home page at: http://www.agisoft.com
Audisio C, Nigrelli G, Pasculli A, Sciarra N, Turconi L (2017) A GIS spatial analysis model for landslide hazard mapping application in alpine area. Int J Sustain Dev Plan 12(5):883–893
Badger TC (2002) Fracturing within anticlines and its kinematic control on slope stability. Environ Eng Geosci 8(1):19–33
Bar N, Barton N (2017) The Q-slope method for rock slope engineering. Rock Mech Rock Eng 50(12):3307–3322
Barton N, Grimstad E (2014) Tunnel and cavern support selection in Norway, based on rock mass classification with the Q-system. Norw Tunnelling Soc 23:45–77
Barton N, Lien R, Lunde J (1974) Engineering classification of rock masses for the design of tunnel support. Rock Mech 6(4):189–239
Basahel H, Mitri H (2017) Application of rock mass classification systems to rock slope stability assessment: a case study. J Rock Mech Geotech Eng 9:993–1009
Bieniawski ZT (1973) Engineering classification of jointed rock masses. Trans South Afr Inst Civil Eng 15(12):355–344
Bieniawski ZT (1989) Engineering rock mass classifications. Wiley, New York
Bieniawski ZT (1993) Classification of rock masses for engineering: the RMR system and future trends. In: Hudson JA (ed) Comprehensive rock engineering: principles, practice and projects. Volume 3: rock testing and site characterization. Pergamon Press, Oxford, pp 553–573
Birch JS (2006) Using 3DM Analyst mine mapping suite for rock face characterization. In: Tonon F, Kottenstette J (eds) Laser and Photogrammetric Methods for Rock Face Characterization. ARMA 13-32
Budetta P, Nappi M (2011) Heterogeneous rock mass classification by means of the geological strength index: the San Mauro formation (Cilento, Italy). Bull Eng Geol Environ 70:585–593
Cai M, Kaiser PK, Uno H, Tasaka Y, Minami M (2004) Estimation of rock mass deformation modulus and strength of jointed hard rock masses using the GSI system. Int J Rock Mech Min Sci 41:3–19
Calamita F, Pizzi A, Ridolfi M, Rusciadelli G, Scisciani V (1998) Il buttressing delle faglie sinsedimentarie pre-thrusting sulla strutturazione neogenica della catena appenninica; l’esempio della M.gna dei Fiori (Appennino Centrale esterno). Boll Soc Geol Ital 117:725–745
Carminati E, Doglioni C (2012) Alps vs. Apennines: the paradigm of a tectonically asymmetric earth. Earth Sci Rev 112:67–96
Cencetti C, Conversini P (2003) Slope instability in the Bastardo Basin (Umbria, Central Italy)? The landslide of Barattano. Nat Hazards Earth Syst Sci 3:561–568
Chen ZY (1995) Recent developments in slope stability analysis. In: Proceedings of the 8th International Congress on Rock Mechanics, Tokyo, Japan, 25–30 September 1995. ISRM, pp 1041–1048
CloudCompare (2018) CloudCompare (version 2.9). Home page at: http://www.cloudcompare.org
Day JJ, Diederichs MS, Hutchinson DJ (2014) Component and system deformation properties of complex rockmasses with healed structure. In: Proceedings of the 48th US Rock Mechanics/Geomechanics Symposium, Minneapolis, Minnesota, 1–4 June 2014, 11 pp
Day JJ, Diederichs MS, Hutchinson DJ (2016) Validation of composite geological strength index for healed rockmass structure in deep mine access and production tunnels. In: Proceedings of the Tunneling Association of Canada 2016 annual conference, Ottawa, Canada, 16–18 October 2016
Dershowitz WS, Herda HH (1992) Interpretation of fracture spacing and intensity. In: 33rd US Symposium on Rock Mechanics, Santa Fe, NM, pp 757–766
Di Francesco L, Fabbi S, Santantonio M, Bigi S, Poblet J (2010) Contribution of different kinematic models and a complex Jurassic stratigraphy in the construction of a forward model for the Montagna Dei Fiori fault-related fold (central Apennines, Italy). Geol J 45:489–505
Donati D, Stead D, Ghirotti M, Brideau MA (2017) A model-oriented, remote sensing approach for the derivation of numerical modelling input data: Insights from the Hope Slide, Canada. In: Proceedings of the 2017 ISRM International Symposium ‘Rock Mechanics for Africa’ AfriRock 2017, Cape Town, South Africa, 30 September–6 October 2017. SAIMM, 15 pp
ESRI (2018) Arcgis desktop (vesrion 10.1). Home page at: https://www.esri.com/en-us/arcgis/about-arcgis/overview
Francioni M, Salvini R, Stead D, Giovannini R, Riccucci S, Vanneschi C, Gullì D (2015) An integrated remote sensing-GIS approach for the analysis of an open pit in the Carrara marble district, Italy: slope stability assessment through kinematic and numerical methods. Comput Geotech 67:46–63
Francioni M, Coggan J, Eyre M, Stead D (2018a) A combined field/remote sensing approach for characterizing landslide risk in coastal areas. Int J Appl Earth Obs Geoinf 67:79–95
Francioni M, Stead D, Clague JJ, Westin A (2018b) Identification and analysis of large paleo-landslides at Mount Burnaby, British Columbia. Environ Eng Geosci 24(2):221–235
Francioni M, Salvini R, Stead D, Coggan J (2018c) Improvements in the integration of remote sensing and rock slope modelling. Nat Hazards 90:975–1004
Hamidi JK, Shahriar K, Rezai B, Rostami J (2010) Performance prediction of hard rock TBM using Rock Mass Rating (RMR) system. Tunn Undergr Space Technol 25:333–345
Hoek E (1994) Strength of rock and rock masses. ISRM New J 2(2):4–16
Hoek E, Brown ET (1997) Practical estimates of rock mass strength. Int J Rock Mech Min Sci 34(8):1165–1186
Hoek E, Marinos P (2000) Predicting tunnel squeezing problems in weak heterogeneous rock masses. Tunnel Tunnelling Int 32(11):45–51
Hoek E, Kaiser PK, Bawden WF (1995) Support of underground excavations in hard rock. Balkema, Rotterdam, the Netherlands
Hoek E, Carter TG, Diederichs MS (2013) Quantification of the geological strength index chart. In: Proceedings of the 47th US Rock Mechanics/Geomechanics Symposium. San Francisco, California, 23–26 June 2013. ARMA 13-672
Jaques D, Rezende K, Marques E (2015) Rock mass classification applied to Volta Grande underground mine site in Brazil. J Geol Resour Eng 4:194–202
Marinos V (2012) Assessing rock mass behaviour for tunneling. Environ Eng Geosci 18(4):327–341
Marinos P, Hoek E (2000) GSI: a geologically friendly tool for rock mass strength estimation. In: Proceedings of GeoEng2000, an International Conference on Geotechnical and Geological Engineering, Melbourne, Australia, 19–24 November 2000. Technomic Publishing Company, Lancaster, PA, pp 1422–1446
Marinos P, Hoek E (2001) Estimating the geotechnical properties of heterogeneous rock masses such as flysch. Bull Eng Geol Environ 60:82–92
Mattei M (1987) Analisi geologico-strutturale della Montagna dei Fiori (Ascoli Piceno, Italia centrale). Geol Romana 26:327–347
McGinnis RN, Ferrill DA, Morris AP, Smart KJ, Lehrmann D (2017) Mechanical stratigraphic controls on natural fracture spacing and penetration. J Struct Geol 95:160–170
Norwegian Geotechnical Institute (NGI) (2015) Using the Q-system, handbook. NGI, 56 pp. Available online at: https://www.ngi.no/eng/Publications-and-library/Books/Q-system
Pace P, Di Domenica A, Calamita F (2014) Summit low-angle faults in the central Apennines of Italy: younger-on-older thrusts or rotated normal faults? Constraints for defining the tectonic style of thrust belts. Tectonics 33:756–785
Pantelidis L (2010) An alternative rock mass classification system for rock slopes. Bull Eng Geol Environ 69(1):29–39
Price NJ (1966) Fault and joint development in brittle and semi-brittle rocks. Pergamon Press, Oxford
Regione Marche (2002) Comune di Numana. Piano regolatore portuale. R.4—relazione geologica, 27 pp. Available online at: http://www.ambiente.marche.it/Portals/0/Territorio/Porti/numana/7_R_4_relazione_geologica.pdf
Riquelme A, Tomás R, Abellán A (2014) SMRTool beta. A calculator for determining Slope Mass Rating (SMR). Universidad de Alicante. Home page at: http://personal.ua.es/es/ariquelme/smrtool.html
Riquelme AJ, Tomás R, Abellán A (2016) Characterization of rock slopes through slope mass rating using 3D point clouds. Int J Rock Mech Min Sci 84:165–176
Romana M (1985) New adjustment ratings for application of Bieniawski classification to slopes. In: Proceedings of the International Symposium on the Role of Rock Mechanics in Excavations for Mining and Civil Works, Zacatecas, Mexico, 2–4 September 1985, pp 49–53
Romana MR (1993) A geomechanical classification for slopes: Slope Mass Rating. In: Hudson JA (ed) Comprehensive rock engineering: principles, practice and projects. Volume 3: rock testing and site characterization
Romana MR, Serón JB, Montalar E (2003) SMR Geomechanics classification: application, experience and validation. In: ISRM 2003—Technology Roadmap for Rock Mechanics, proceedings of the 10th Congress of the ISRM, Johannesburg, South Africa, 8–12 September 2003. South African Institute of Mining and Metallurgy
Romana MR, Tomas R, Seron JB (2015) Slope Mass Rating (SMR) geomechanics classification: thirty years review. In: Proceedings of the 13th ISRM International Congress on Rock Mechanics, Montréal, Quebec, Canada, 10–13 May 2015, 10 pp
Salvini R, Francioni M, Riccucci S, Fantozzi PL, Bonciani F, Mancini S (2011) Stability analysis of “Grotta delle Felci” Cliff (Capri Island, Italy): structural, engineering–geological, photogrammetric surveys and laser scanning. Bull Eng Geol Environ 70:549–557
Salvini R, Francioni M, Riccucci S, Bonciani F, Callegari I (2013) Photogrammetry and laser scanning for analyzing slope stability and rock fall runout along the Domodossola–Iselle railway, the Italian Alps. Geomorphology 185:110–122
Sciarra N, Marchetti D, D’Amato Avanzi G, Calista M (2015) Rock slope analysis on the complex Livorno coastal cliff (Tuscany, Italy). Geogr Fis Dinam Quat 37(2):113–130
Scisciani V, Montefalcone R (2006) Coexistence of thin- and thick-skinned tectonics: an example from the Central Apennines, Italy. In: Mazzoli S Butler RWH (eds) Styles of continental contraction: Geological Society of America Special Paper 414, pp 33–54
Scisciani V, Tavarnelli E, Calamita F (2002) The interaction of extensional and contractional deformations in the outer zones of the Central Apennines, Italy. J Struct Geol 24:1647–1658
Scisciani V, Agostini S, Calamita F, Pace P, Cilli A, Giori I, Paltrinieri W (2014) Positive inversion tectonics in foreland fold-and-thrust belts: a reappraisal of the Umbria–Marche Northern Apennines (Central Italy) by integrating geological and geophysical data. Tectonophysics 637:218–237
Spreafico MC, Cervi F, Francioni M, Stead D, Borgatti L (2017) An investigation into the development of toppling at the edge of fractured rock plateaux using a numerical modelling approach. Geomorphology 288:83–98
Stead D, Wolter A (2015) A critical review of rock slope failure mechanisms: the importance of structural geology. J Struct Geol 74:1–23
Storti F, Balsamo F, Koopman A (2017) Geological map of the partially dolomitized Jurassic succession exposed in the core of the Montagna Dei Fiori anticline, Central Apennines, Italy. Ital J Geosci 136:125–135
Sturzenegger M, Stead D (2009) Close-range terrestrial digital photogrammetry and terrestrial laser scanning for discontinuity characterization on rock cuts. Eng Geol 106:163–182
Tavarnelli E (1996a) Ancient synsedimentary structural control on thrust ramp development: an example from the Northern Apennines, Italy. Terra Nova 8:65–74
Tavarnelli E (1996b) The effects of pre-existing normal faults on thrust ramp development: an example from the Northern Apennines, Italy. Geol Rundsch 85:363–371
Tavarnelli E, Peacock DCP (1999) From extension to contraction in syn-orogenic foredeep basins: the Contessa section, Umbria-Marche Apennines, Italy. Terra Nova 11:55–60
Tomás R, Delgado J, Serón Gáñez JB (2007) Modification of slope mass rating (SMR) by continuous functions. Int J Rock Mech Min Sci 44:1062–1069
Tomás R, Cuenca A, Cano M, García-Barba J (2012) A graphical approach for slope mass rating (SMR). Eng Geol 124:67–76
van Westen CJ (1994) GIS in landslide hazard zonation: a review, with examples from the Andes of Colombia. In: Price MF, Heywood DI (eds) Mountain environment and geographic information systems. Taylor & Francis, London, pp 135–165
Watkins H, Healy D, Bond CE, Butler RWH (2018) Implications of heterogeneous fracture distribution on reservoir quality: an analogue from the Torridon Group sandstone, Moine Thrust Belt, NW Scotland. J Struct Geol 108:180–197
Westoby MJ, Brasington J, Glasser NF, Hambrey MJ, Reynolds JM (2012) ‘Structure-from-Motion’ photogrammetry: a low-cost, effective tool for geoscience. Geomorphology 179:300–314
Wolter A, Stead D, Ward BC, Clague JJ, Ghirotti M (2016) Engineering geomorphological characterisation of the Vajont Slide, Italy, and a new interpretation of the chronology and evolution of the landslide. Landslides 5:1067–1081
Wu C (2011) VisualSFM: a visual structure from motion system. Home page at: http://www.cs.washington.edu/homes/ccwu/vsfm/
Xie M, Esaki T, Qiu C, Wang CX (2006) Geographical information system-based computational implementation and application of spatial three-dimensional slope stability analysis. Comput Geotech 33:260–274
Yilmaz I, Marschalko M, Yildirim M, Dereli E, Bednarik M (2012) GIS-based kinematic slope instability and slope mass rating (SMR) maps: application to a railway route in Sivas (Turkey). Bull Eng Geol Environ 71(2):351–357
Acknowledgements
The authors wish to thank Mr. Raffaele Di Ceglie and Miss Milena Vitulli (University “G. d’Annunzio” of Chieti-Pescara, Chieti, Italy) for their support during the engineering geological survey. Moreover, we would like to express our gratitude to the reviewers, who provided important and constructive suggestions for improving the quality of the paper.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Francioni, M., Stead, D., Sciarra, N. et al. A new approach for defining Slope Mass Rating in heterogeneous sedimentary rocks using a combined remote sensing GIS approach. Bull Eng Geol Environ 78, 4253–4274 (2019). https://doi.org/10.1007/s10064-018-1396-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10064-018-1396-1