Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Skip to main content

Advertisement

A high efficiency transmitter and receiver for magnetic resonant wireless battery charging system in 0.35 μm BCD

  • Published:
Analog Integrated Circuits and Signal Processing Aims and scope Submit manuscript

Abstract

This paper presents a transmitter and receiver for magnetic resonant wireless battery charging system. In the receiver, a wide-input range CMOS multi-mode active rectifier is proposed for a magnetic resonant wireless battery charging system. The configuration is automatically changed with respect to the magnitude of the input AC voltage. The output voltage of the multi-mode rectifier is sensed by a comparator. Furthermore, the configuration of the multi-mode rectifier is automatically selected by switches as original rectifier mode, 1-stage voltage multiplier or 2-stage voltage multiplier mode. As a result, a rectified DC voltage is output from 7.5 to 19 V for an input AC voltage of 5–20 V. In the transmitter, a class-E power amplifier (PA) with an automatic power control loop and load compensation circuit is proposed to improve the power efficiency. The transmitted power is controlled by adjusting the signal applied to the gate of the power control transistor. In addition, a parallel capacitor is also controlled to enhance the efficiency and compensate for the load variation. This chip is implemented using 0.35 μm BCD technology with an active area of around 5,000 × 2,500 μm. When the magnitude of the input AC voltage is 10 V, the power conversion efficiency of the multi-mode active rectifier is about 94 %.The maximum power efficiency of the receiver is about 70 %. The transmitter provides an output power control range of 10–30.2 dBm. The maximum power efficiency of the PA is 71.5 %.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Subscribe and save

Springer+ Basic
$34.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Fig. 19
Fig. 20
Fig. 21
Fig. 22
Fig. 23
Fig. 24

Similar content being viewed by others

References

  1. Y-H Lam et al. (2006). Integrated low-loss CMOS active rectifier for wirelessly powered devices. IEEE Transactions on Circuits and Systems-I: Express Briefs, 53(12), 1378–1982.

    Google Scholar 

  2. Peters, C., Spreemann, D., Ortmanns, M., & Manoli, Y. (2008). A CMOS integrated voltage and power efficient AC/DC converter for energy harvesting applications. Journal of Micromechanics and Microengineering, 18, 104005. 9pp.

    Article  Google Scholar 

  3. Saeid, H., Mohamad, S., & Yvon S. (2007). A novel fully-integrated dropless voltage CMOS rectifier for wirelessly powered devices. IEEE Microelectronics, 333–336.

  4. Wireless Power Consortium. (2010). System description wireless power transfer. Volume I: Low power, Part 1: Interface Definition Version 1.0.

  5. Park H.-G. et al. (2013). A wide input range, high-efficiency multi-mode active rectifier for magnetic resonant wireless power transfer system. IEICE Transaction on Electronics, E96-C(1).

  6. Joaquin, J., & Casanova et al. (2009). Design and test of a high-power high-efficiency loosely coupled planar wireless power transfer system. IEEE Transactions on Industrial Electronics, 56(5).

  7. Sira, D., Thomsen, P., & Larsen, T. (2010). Output power control in Class-E power amplifiers. IEEE Microwave and Wireless Components Letters, 20(4), 232–234.

    Article  Google Scholar 

  8. Jose, IG., Jose Miguel de, D. (2006). Salvadora Piedra Perea, “Mixed RF Output Power Control for Low Power Transmitters in Mobile Cellular Terminals”. In Proceedings of IEEE International Symposium on Industrial Electronics (pp. 9–12). Montreal, Quebec, Canada.

  9. Mohamed, El-N., et al. (2010). High PSR low drop-out regulator with feed-forward ripple cancellation technique. IEEE Journal of Solid-State Circuits, 45(3) , 565–577.

    Google Scholar 

  10. Heng, S., et al. (2010). A low-power high-PSRR low-dropout regulator with bulk-gate controlled circuit. IEEE Transactions on Circuits and Systems-II: Express Briefs, 57(4), 245–249.

    Article  Google Scholar 

  11. Guo, S., et al. (2009). An efficiency-enhanced CMOS rectifier with unbalanced-biased comparators for transcutaneous-powered high-current implants. IEEE Journal of Solid-State Circuits, 44(6), 1796–1804.

    Article  Google Scholar 

Download references

Acknowledgments

This research was supported by the MSIP (Ministry of Science, ICT&Future Planning), Korea, under the ITRC (Information Technology Research Center) support program (NIPA-2013-(H0301-13-1013)) supervised by the NIPA (National IT Industry Promotion Agency).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Kang-Yoon Lee.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Moon, YK., Park, HG., Jang, JH. et al. A high efficiency transmitter and receiver for magnetic resonant wireless battery charging system in 0.35 μm BCD. Analog Integr Circ Sig Process 79, 57–72 (2014). https://doi.org/10.1007/s10470-013-0253-1

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10470-013-0253-1

Keywords