Abstract
This study investigates the use of vibrothermography to detect cracks in concrete parts, developing acoustic excitation devices (sonic and ultrasonic and low- and high-power excitation devices) and examining the influences of excitation frequency, power, and pressure on the ability to detect cracks. Experimental results demonstrate that this inspection technique can suitably detect concrete cracks: Ultrasound at frequencies from 20 to 100 kHz could be used to excite concrete cracks with notable temperature rise; coarse aggregates in concrete do not interfere with the ability to detect cracks; high-power ultrasound enhances crack detection though intense scattering of attenuation that could be induced by coarse aggregates. Moreover, the stimulus horn designed as part of this study can input ultrasound at high power into concrete parts without damaging the contact surface, while the custom-made pressure loading sleeve can steadily exert force on the transducer during excitation; the optimal force exerted on KMD ultrasonic transducers with a rated power of 50 W is ~ 1500 N, which can make the transducer output enough power to detect cracks.
Similar content being viewed by others
References
Renshaw, J., Chen, J.C., Holland, S.D., Thompson, R.B.: The sources of heat generation in vibrothermography. NDT and E Int. 44(8), 736–739 (2011). https://doi.org/10.1016/j.ndteint.2011.07.012
Khmelev, V.N., Barsukov, R.V., Slivin, A.N., Tchyganok, S.N.: System of phase-locked-loop frequency control of ultrasonic generators. In: Proceedings 2nd Annual Siberian Russian Student Workshop on Electron Devices and Materials (2001) https://doi.org/10.1109/SREDM.2001.939147
Cho, J.W., Seo, Y.-C., Jung, S.-H., Jung, H.-K.: Defect detection within a pipe using ultrasound excited thermography. Nucl. Eng. Technol. 39(5), 637–646 (2007). https://doi.org/10.5516/NET.2007.39.5.637
Mian, A., Han, X., Islam, S., Newaz, G.: Fatigue damage detection in graphite/epoxy composites using sonic infrared imaging technique. Compos. Sci. Technol. 64(5), 657–666 (2004). https://doi.org/10.1016/j.compscitech.2003.07.005
Guo, X., Vavilov, V.: Crack detection in aluminum parts by using ultrasound-excited infrared thermography. Infrared Phys. Technol. 61, 149–156 (2013). https://doi.org/10.1016/j.infrared.2013.08.003
Plum, R., Ummenhofer, T.: Use of ultrasound excited thermography applied to massive steel components emerging crack detecting methodology. J. Bridge Eng. 18(6), 455–463 (2013). https://doi.org/10.1061/(ASCE)BE.1943-5592.0000355
Piau, J.-M., Bendada, A., Maldague, X., Legoux, J.-G.: Nondestructive testing of open microscopic cracks in plasma-sprayed-coatings using ultrasound excited vibrothermography. Nondestruct. Test. Eval. 23(2), 109–120 (2008). https://doi.org/10.1080/10589750701775817
De Belie, N., De Muynck, W.: Crack repair in concrete using biodeposition. In: Proceedings of the 2nd International Conference ov Concrete Repair, Rehabilitation and Retrofitting, pp. 291–292 (2008)
Wan, K.T., Leung, C.K.Y.: Fiber optic sensor for the monitoring of mixed mode cracks in structures. Sens. Actuators A 135(2), 370–380 (2007). https://doi.org/10.1016/j.sna.2006.08.002
Philippidis, T.P., Aggelis, D.G.: Experimental study of wave dispersion and attenuation in concrete. Ultrasonics 43(7), 584–595 (2005). https://doi.org/10.1016/j.ultras.2004.12.001
Chaix, J.F., Garnier, V., Corneloup, G.: Ultrasonic wave propagation in heterogeneous solid media: theoretical analysis and experimental validation. Ultrasonics 44(2), 200–210 (2006). https://doi.org/10.1016/j.ultras.2005.11.002
Waterman, P.C., Truell, R.: Multiple scattering of waves. J. Math. Phys. 2(4), 512–537 (1961). https://doi.org/10.1063/1.1703737
Homma, C., Rothenfusser, M., Baumann, J., Shannon, R.: Study of the heat generation mechanism in acoustic thermography. Proc. AIP Conf. 820, 566 (2006). https://doi.org/10.1063/1.2184578
Umar, M.Z., Vavilov, V., Abdullah, H., Ariffin, A.K.: Ultrasonic infrared thermography in non-destructive testing: a review. Rus. J. Nondestruct. Test. 52(4), 212–219 (2016)
Parrini, L.: Design of advanced ultrasonic transducers for welding devices. IEEE Trans. Ultrason. Ferroelectr. Freq. Control 48(6), 1632–1639 (2001). https://doi.org/10.1109/58.971714
Volkov, S.S., Kholopov, Y.V.: Technology and equipment for ultrasound welding structures made of polymer-based composite materials. Weld. Int. 12(5), 400–403 (1998)
Millner, R.: Ultraschalltechnik. Physik-Verlag, Belin, Weinheim (1987)
GB178-1977 (2006) Standard Sand for Cement Strength Test. China Standard Press, Beijing
Lei, T., Hong, L., Yu, J., Ling, G.: Study of an acoustic field simulation of a temperature field excited by ultrasonic waves through a concrete specimen. Insight 59(6), 305–310 (2017)
Garnier, V., Piwakowski, B., Abraham, O., Villain, G., Payan, C., Chaix, J.F.: Acoustic techniques for concrete evaluation: improvements, comparisons and consistency. Constr. Build. Mater. 43, 598–613 (2013). https://doi.org/10.1016/j.conbuildmat.2013.01.035
Hiremath, S.R., Mahaoatra, D.R., Srinivasan, S.: Detection of crack in metal plate by thermo sonic wave based detection using FEM. Exp. Stroke Transl. Med. 1(1), 12–18 (2012)
Zweschper, T., Dillenz, A., Riegert, G., Scherling, D., Busse, G.: Ultrasound excited thermography using frequency modulated elastic waves. Insight 45(3), 178–182 (2003)
Chen, Y.-C., Wu, S., Chen, P.-C.: The impedance-matching design and simulation on high power elctro-acoustical transducer. Sens. Actuators, A 115(1), 38–45 (2004). https://doi.org/10.1016/j.sna.2004.01.063
Inoue, T., Sasaki, T., Miyama, T., Sugiuchi, K.: Equivalent circuit analysis for Tonpilz piezoelectric transducer. IEICE Trans. E70(10), 909–917 (1987)
Martin, G.E.: On the theory of segmented electromechanical systems. J. Acoust. Soc. Am. 36(7), 1366–1370 (1964). https://doi.org/10.1121/1.1919209
Chen, Z.: Research of Ultrasonic Generator. Dissertation, Zhejiang University (2007)
Lu, J., Han, X., Newaz, G., Favro, L.D., Thomas, R.L.: Study of the effect of crack closure in sonic infrared imaging. Nondestruct. Test. Eval. 22(2–3), 127–135 (2007)
Funding
This work was supported by the National Natural Science Foundation of China (Grant No. 51527811) and the National Key Research and Development Plan of China (Grant No. 2016YFC0401610).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Jia, Y., Tang, L., Xu, B. et al. Crack Detection in Concrete Parts Using Vibrothermography. J Nondestruct Eval 38, 21 (2019). https://doi.org/10.1007/s10921-019-0562-0
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s10921-019-0562-0