Abstract
Fault diagnosis of gearbox is difficult due to the complexity and instability of its vibration signal. A fault diagnosis method of gearbox based on WPT-CLSPSO-BP (Wavelet Packet Transform- Chaos Particle Swarm Optimization-Back Propagation Neural Network) is proposed in this study to solve this problem. Wavelet packet transform (WPT) is used to decompose and reconstruct the signal, and the energy value of each component is calculated according to the formula, and the energy value is used as a feature input to form a feature sample. Aiming at the problem of slow convergence speed and easy local optimization of traditional BP neural network, a chaotic particle swarm algorithm is proposed to optimize the weight and threshold of the network, and the optimized network performance is verified with the data collected by experiments. Experimental results show that the average diagnosis rate of CLSPSO-BP is above 92%,the trained model not only has a high diagnostic rate, which can be improved by nearly 10%, but also can keep the error value between the actual output and the predicted output below 0.1%, indicating that the optimized network has a higher fault recognition rate.
Similar content being viewed by others
Data availability
The data used to support the findings of this study are available from the corresponding author upon request.
References
Ali A, Zhu YM, Zakarya M (2021) A data aggregation based approach to exploit dynamic spatio-temporal correlations for citywide crowd flows prediction in fog computing[J]. Multimed Tools Appl 80:31401–31433
Ali A, Zhu YM, Zakarya M (2021) Exploiting dynamic spatio-temporal correlations for citywide traffic flow prediction using attention based neural networks[J].Inf Sci 577:852–870
Ali A, Zhu YM, Zakarya M (2022) Exploiting dynamic spatio-temporal graph convolutional neural networks for citywide traffic flows prediction[J]. Neural Netw 145:233–247
Azamfer M, Singh J, Bravo-Imaz I et al (2020) Multisensor data fusion for gearbox fault diagnosis using 2-D convolutional neural network and motor current signature analysis[J]. Mech Syst Signal Process 144:106861
Dongardive J, Abraham S (2017) Reaching optimized parameter set: protein secondary structure prediction using neural network[J]. Neural Comput & Applic 28(8):1947–1974
Huang WT, Kong FZ, Zhao XZ (2018) Spur bevel gearbox fault diagnosis using wavelet packet transform and rough set theory[J]. J Intell Manuf 29(6):1257–1271
Jabidi MM, Emami N (2016) A hybrid search method of wrapper feature selection by chaos particle swarm optimization and local search[J]. Turk J Electr Eng Comput Sci 24(5):3852–3861
Karami V, Chenaghlou MR, Mostafa-Gharabaghi AR (2020) A combination of wavelet packet energy curvature difference and Richardson extrapolation for structural damage detection[J]. Appl Ocean Res 101:102224
Khan K, Sahai A (2012) A comparison of BA, GA, PSO, BP and LM for training feed forward neural networks in e-learning context[J]. Int J Intell Syst Appl 4(7):23–29
Kim Y, Park J, Na K, Yuan H, Youn BD, Kang CS (2020) Phase-based time domain averaging (PTDA) for fault detection of a gearbox in an industrial robot using vibration signals[J]. Mech Syst Signal Process 138:106544
Paul R, Sengupta A (2017) Discrete wavelet packet transform based controller for liquid level system and its performance analysis[J]. Measurement 97:226–233
Plaza EG, Núñez-López PJ (2018) Application of the wavelet packet transform to vibration signals for surface roughness monitoring in CNC turning operations[J]. Mech Syst Signal Process 98:902–919
Santana GA, Durand FR, Abrão T (2019) Power allocation in PON-OCDMA with improved Chaos particle swarm optimization[J]. J Microwaves Optoelectron Electromagn Appl 17(2):268–283
Singh J, Darpe AK, Singh SP (2018) Rolling element bearing fault diagnosis based on over-complete rational dilation wavelet transform and auto-correlation of analytic energy operator[J]. Mech Syst Signal Process 100:662–693
Sun RB, Yang ZB, Zhai Z, Chen XF (2019) Sparse representation based on parametric impulsive dictionary design for bearing fault diagnosis[J]. Mech Syst Signal Process 122:737–753
Tayab UB, Zia A, Yang FW, Lu J, Muhammad K (2020) Short-term load forecasting for microgrid energy management system using hybrid HHO-FNN model with best-basis stationary wavelet packet transform[J]. Energy 203:117857
Wang LM, Shao YM (2017) Fault mode analysis and detection for gear tooth crack during its propagating process based on dynamic simulation method[J]. Eng Fail Anal 71:166–178
Wang YX, He ZJ, Zi YY (2010) Enhancement of signal denoising and multiple fault signatures detecting in rotating machinery using dual-tree complex wavelet transform[J]. Mech Syst Signal Process 24(1):119–137
Xu XM, Zhang L, Jiang YP et al (2019) Active control on path following and lateral stability for truck–trailer combinations[J]. Arab J Sci Eng 44(2):1365–1377
Yesilli MC, Khasawneh FA, Otto A (2020) On transfer learning for chatter detection in turning using wavelet packet transform and ensemble empirical mode decomposition[J]. CIRP J Manuf Sci Technol 28:118–135
Zhang Y, Hutchinson P, Lieven NAJ et al (2017) Optimal compression of vibration data with lifting wavelet transform and context-based arithmetic coding[C], European, 2017 25th European Signal Processing Conference, pp 1–2
Zhang Z, Wang CM, Li F et al (2019) Improved empirical wavelet transform method based on spectrum trend for gearbox fault signal processing[J]. Proc Inst Mech Eng 233(13):3449–3459
Zhang Y, Hutchinson P, Lieven NAJ, Nunez-Yanez J (2019) Adaptive event-triggered anomaly detection in compressed vibration data[J]. Mech Syst Signal Process 122:480–501
Zhang Y, Hutchinson P, Lieven NAJ et al (2020) Remaining useful life estimation using long short-term memory neural networks and deep fusion[C]. 8: 19033–19045
Zhou XK, Yu JB (2020) Gearbox fault diagnosis based on deep one-dimensional residual convolutional autoencoding network[J]. J Mech Eng 56(7):96–108
Zhou ZC, Lin B, Liu XF et al (2019) Fault severity recognition based on self-adaptive particle swarm optimisation using wavelet kernel extreme learning machine[J]. Insight 61(1):35–43
Zuber N, Cvetkovic D (2013) Rolling element bearings fault identification in rotating machines, existing methods of vibration signal processing techniques and practical considerations[J]. Appl Mech Mater 430:70–77
Funding
The research is funded partially by Modern Agricultural Machinery Equipment and Technology Demonstration and Promotion Project in Jiangsu Province (NJ2020–01), and the Key Research and Development Program of Jiangsu Province (BE2020317).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that there are no competing interests regarding the publication of this paper.
Additional information
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Xiao, M., Zhang, W., Zhao, Y. et al. Fault diagnosis of gearbox based on wavelet packet transform and CLSPSO-BP. Multimed Tools Appl 81, 11519–11535 (2022). https://doi.org/10.1007/s11042-022-12465-3
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11042-022-12465-3