Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Skip to main content

Advertisement

Springer Nature Link
Log in

Additive manufacturing: recent trends, applications and future outlooks

  • Review Article
  • Published:
Progress in Additive Manufacturing Aims and scope Submit manuscript

Abstract

In today’s era, additive manufacturing (AM) is attracting unparalleled attention across the globe. From initial obscurity, today there is practically no sphere of life untouched by this technology. The quantum of research in this field has witnessed overwhelming growth which in turn leads to impressive newer developments at almost regular intervals. AM has emerged from rapid prototyping and is today utilised in fabricating large number of end products. These consistent advancements lead to emergence of newer research fields and challenges that demand attention. It is also interesting to observe the spectrum of AM applications that have grown over years. This article exhaustively reviews the various AM applications in different sectors such as aerospace, repair, automobile, healthcare, retail, etc. and is aimed to provide the readers a deep insight into the probable unexplored areas through an extensive literature analysis. Recent trends and future outlook of AM in various industrial sectors have been suitably discussed.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
$34.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Fig. 19
Fig. 20

Similar content being viewed by others

References

  1. Lasi, H., Fettke, P., Kemper, H.-G., Feld, T., Hoffmann, M., Industrie 4.0. WIRTSCHAFTSINFORMATIK, 2014. 56(4): p. 261–264.

  2. Srivastava M, Rathee S, Maheshwari S, Kundra TK, Additive Manufacturing: Fundamentals and Advancements 2019, Boca Raton, Florida: CRC Press

  3. Meier M, Tan Kim H, Lim Ming K, Chung L (2019) Unlocking innovation in the sport industry through additive manufacturing. Bus Process Manag J 25(3):456–475

    Article  Google Scholar 

  4. Gebhardt A, Hötter Jan-S, 2—Characteristics of the Additive Manufacturing Process, in Additive Manufacturing, A. Gebhardt and J.-S. Hötter, Editors. 2016, Hanser. p. 21–91.

  5. Cotteleer M, Holdowsky J, Mahto M, The 3D opportunity primer: The basics of additive manufacturing. Deloitte University Press, Westlake, Texas, USA, 2014. http://dupress.com/articles/the-3d-opportunity-primer-the-basics-of-additive-manufacturing, Accessed on 8 Feb. 2019, 2014.

  6. Pham DT, D.S.S., Rapid Manufacturing, The Technologies and Applications of Rapid Prototyping and Rapid Tooling 2001: Springer, London.

  7. Gebhardt A, Understanding additive manufacturing, in understanding additive manufacturing 2011, Hanser. p I-IX.

  8. Attaran M (2017) The rise of 3-D printing: The advantages of additive manufacturing over traditional manufacturing. Bus Horiz 60(5):677–688

    Article  Google Scholar 

  9. Srivastava M (2015) Some studies on layout of generative manufacturing processes for functional components. Delhi University, India

    Google Scholar 

  10. Gisario A, Kazarian M, Martina F, Mehrpouya M (2019) Metal additive manufacturing in the commercial aviation industry: a review. J Manuf Syst 53:124–149

    Article  Google Scholar 

  11. Yap YL, Yeong WY (2014) Additive manufacture of fashion and jewellery products: a mini review. Virtual Phys Prototyping 9(3):195–201

    Article  Google Scholar 

  12. ten Kate J, Smit G, Breedveld P (2017) 3D-printed upper limb prostheses: a review. Disabil Rehabil Assist Technol 12(3):300–314

    Article  Google Scholar 

  13. Lim S, Buswell RA, Le TT, Austin SA, Gibb AGF, Thorpe T (2012) Developments in construction-scale additive manufacturing processes. Autom Constr 21:262–268

    Article  Google Scholar 

  14. Buswell, R.A., Leal de Silva, W. R., Jones, S. Z., Dirrenberger, J., 3D printing using concrete extrusion: A roadmap for research. Cement and Concrete Research, 2018. 112: p. 37–49.

  15. Wu P, Wang J, Wang X (2016) A critical review of the use of 3-D printing in the construction industry. Autom Constr 68:21–31

    Article  Google Scholar 

  16. Bose S, Ke D, Sahasrabudhe H, Bandyopadhyay A (2018) Additive manufacturing of biomaterials. Prog Mater Sci 93:45–111

    Article  Google Scholar 

  17. Tofail SAM, Koumoulos EP, Bandyopadhyay A, Bose S, O’Donoghue L, Charitidis C (2018) Additive manufacturing: scientific and technological challenges, market uptake and opportunities. Mater Today 21(1):22–37

    Article  Google Scholar 

  18. Tuomi J, Paloheimo K-S, Vehviläinen J, Björkstrand R, Salmi M, Huotilainen E, Kontio R, Rouse S, Gibson I, Mäkitie AA, A novel classification and online platform for planning and documentation of medical applications of additive manufacturing. Surgical Innovation, 2014. 21(6): 553–559.

  19. Perkins I, Skitmore M (2015) Three-dimensional printing in the construction industry: A review. Int J Constr Manag 15(1):1–9

    Google Scholar 

  20. Chen RK, Jin Y-a, Wensman J, Shih A (2016) Additive manufacturing of custom orthoses and prostheses—a review. Additive Manufacturing 12: p. 77–89.

  21. Gebhardt A, Materials, Design, and Quality Aspects for Additive Manufacturing, in Understanding Additive Manufacturing 2011, Hanser. p 129–149.

  22. Rathee S, Srivastava M, Maheshwari S, Kundra TK, Siddiquee AN Friction Based Additive Manufacturing Technologies: Principles for Building in Solid State, Benefits, Limitations, and Applications. Ist ed2018, Boca Raton: CRC Press, Taylor & Francis group.

  23. ASTM, S., Standard terminology for additive manufacturing technologies, F2792–12a., 2013.

  24. F2792–12A, A., Standard Terminology for Additive Manufacturing Technologies, 2012: West Conshohocken, PA.

  25. Trombetta R, Inzana JA, Schwarz EM, Kates SL, Awad HA (2017) 3D printing of calcium phosphate ceramics for bone tissue engineering and drug delivery. Ann Biomed Eng 45(1):23–44

    Article  Google Scholar 

  26. Schmidleithner, C., Kalaskar, D. M., Stereolithography, in 3D Printing, D. Cvetković, Editor 2018, IntechOpen.

  27. Spangenberg A, Hobeika N, Stehlin F, Malval JP, Wieder F, Prabhakaran P, Baldeck P, Soppera O, chapter 2- Recent Advances in Two-Photon Stereolithography, in Updates in Advanced Lithography 2013, InTechOpen. p. 35–62.

  28. Denk W, Strickler JH (1990) Webb, WW, Two-photon laser scanning fluorescence microscopy. Science 248(4951):73–76

    Article  Google Scholar 

  29. Hafkamp T, van Baars G, de Jager B, Etman P (2018) A feasibility study on process monitoring and control in vat photopolymerization of ceramics. Mechatronics 56:220–241

    Article  Google Scholar 

  30. Bikas H, Stavropoulos P, Chryssolouris G (2016) Additive manufacturing methods and modelling approaches: a critical review. Int J Adv Manuf Technol 83(1):389–405

    Article  Google Scholar 

  31. King WE et al. (2015) Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges. Appl Phys Rev 2(4): 041304.

  32. Zhang, Y., et al., 2—Additive manufacturing processes and equipment, in Additive Manufacturing. J Zhang and Y.-G. Jung, Editors. 2018, Butterworth-Heinemann. p. 39–51.

  33. Goodridge R, Ziegelmeier S Powder bed fusion of polymers, in Laser Additive Manufacturing, M. Brandt, Editor 2017, Woodhead Publishing. p. 181–204.

  34. Kruth JP, Mercelis P, Van Vaerenbergh J, Froyen L, Rombouts M (2005) Binding mechanisms in selective laser sintering and selective laser melting. Rapid Prototyping J 11(1):26–36

    Article  Google Scholar 

  35. Brandt M The role of lasers in additive manufacturing, in Laser Additive Manufacturing, M. Brandt, Editor 2017, Woodhead Publishing. p. 1–18.

  36. Thompson SM, Bian L, Shamsaei N, Yadollahi A (2015) An overview of direct laser deposition for additive manufacturing; part i: transport phenomena, modeling and diagnostics. Addit Manuf 8:36–62

    Google Scholar 

  37. Leary M Chapter 11—Powder bed fusion, in Design for Additive Manufacturing, M. Leary, Editor 2020, Elsevier. p. 295–319.

  38. Chatham CA, Long TE, Williams CB (2019) A review of the process physics and material screening methods for polymer powder bed fusion additive manufacturing. Prog Polym Sci 93:68–95

    Article  Google Scholar 

  39. Oliveira JP, LaLonde A, Ma J (2020) Processing parameters in laser powder bed fusion metal additive manufacturing. Materials Design: 108762.

  40. Boes J, Röttger A, Theisen W (2020) Microstructure and properties of high-strength C + N austenitic stainless steel processed by laser powder bed fusion. Additive Manufacturing 32: 101081.

  41. Bodner SC et al. (2020) Inconel-steel multilayers by liquid dispersed metal powder bed fusion: Microstructure, residual stress and property gradients. Additive Manufacturing 32: 101027.

  42. Cepeda-Jiménez CM et al. (2020) Effect of energy density on the microstructure and texture evolution of Ti-6Al-4V manufactured by laser powder bed fusion. Materials Characterization 163: 110238.

  43. Eskandari Sabzi H (2019) Powder bed fusion additive layer manufacturing of titanium alloys. Mater Sci Technol 35(8):875–890

    Article  Google Scholar 

  44. Sutton AT, Kriewall CS, Leu MC, Newkirk JW (2017) Powder characterisation techniques and effects of powder characteristics on part properties in powder-bed fusion processes. Virtual Physical Prototyping 12(1): p. 3–29.

  45. Srivastava M, Maheshwari S, Kundra TK, Rathee S, Yashaswi R, Sharma SK (2016) Virtual Design, Modelling and Analysis of Functionally graded materials by Fused Deposition Modeling. Materials Today: Proceedings 3(10, Part B): 3660–3665.

  46. Srivastava M, Rathee S (2018) Optimisation of FDM process parameters by Taguchi method for imparting customised properties to components. Virtual Phys Prototyping 13(3):203–210

    Article  Google Scholar 

  47. Srivastava M, RS, Maheshwari S, Kundra TK (2018) Multi-objective optimisation of fused deposition modelling process parameters using RSM and fuzzy logic for build time and support material. Int J Rapid Manuf 7(1): 25–42.

  48. Srivastava M, R., S., Maheshwari S, Kundra TK (2018) Multi-objective optimisation of fused deposition modelling process parameters using RSM and fuzzy logic for build time and support material. Int J Rapid Manuf 7(1): 25–42.

  49. Rathee S, Srivastava M, Maheshwari S, Siddiquee AN (2017) Effect of varying spatial orientations on build time requirements for FDM process: a case study. Defence Technology 13(2):92–100

    Article  Google Scholar 

  50. Srivastava M, Maheshwari S, Kundra TK (2015) Virtual modelling and simulation of functionally graded material component using FDM technique. Materials Today: Proceedings 2(4):3471–3480

    Google Scholar 

  51. Srivastava M, Maheshwari S, Kundra TK, Yashaswi R, Rathee S Integration of Fuzzy Logic with Response Surface Methodology for Predicting the Effect of Process Parameters on Build Time and Model Material Volume in FDM Process, in CAD/CAM, Robotics and Factories of the Future: Proceedings of the 28th International Conference on CARs & FoF 2016, D.K. Mandal and C.S. Syan, Editors. 2016, Springer India: New Delhi. p. 195–206.

  52. Srivastava M, Maheshwari S, Kundra TK, Rathee S (2017) Estimation of the effect of process parameters on build time and model material volume for fdm process optimization by response surface methodology and grey relational analysis. In: Wimpenny DI, Pandey PM, Kumar LJ (eds) Advances in 3D printing & additive manufacturing technologies. Springer Singapore, Singapore, pp 29–38

    Chapter  Google Scholar 

  53. Srivastava M, Maheshwari S, Kundra TK, Rathee S (2017) Multi-response optimization of fused deposition modelling process parameters of abs using response surface methodology (RSM)-based desirability analysis. Materials Today 4(2, Part A): 1972–1977.

  54. Srivastava M, Maheshwari S, Kundra TK, Rathee S An Integrated RSM-GA Based Approach for Multi Response Optimization of FDM Process Parameters for Pyramidal ABS Primitives, in Journal for Manufacturing Science and Production 2016. p 201.

  55. Srivastava M, R.S., Maheshwari S, Kundra TK (2019) Estimating percentage contribution of process parameters towards build time of FDM process for components displaying spatial symmetry: a case study. Int J Materials Product Technol. 58(2–3): p. 201–224.

  56. Norman J et al (2017) A new chapter in pharmaceutical manufacturing: 3D-printed drug products. Adv Drug Deliv Rev 108:39–50

    Article  Google Scholar 

  57. Sireesha M, Lee J, Kranthi KAS, Babu VJ, Kee BBT, Ramakrishna S (2018) A review on additive manufacturing and its way into the oil and gas industry. RSC Adv 8(40):22460–22468

    Article  Google Scholar 

  58. Sachs EM, H.J., Cima MJ, Williams PA (1993) Three-dimensional Printing Techniques, US5204055, Editor: US.

  59. Zhou Z et al. (2020) Binder jetting additive manufacturing of hydroxyapatite powders: effects of adhesives on geometrical accuracy and green compressive strength. Additive Manuf. 36: 101645.

  60. Sivarupan T, et al. (2021) A review on the progress and challenges of binder jet 3D printing of sand moulds for advanced casting. Additive Manuf 40: 101889.

  61. Dini F et al (2020) A review of binder jet process parameters; powder, binder, printing and sintering condition. Met Powder Rep 75(2):95–100

    Article  MathSciNet  Google Scholar 

  62. Zhang Y, Wu L, Guo X, Kane S, Deng Y, Jung Y-G, Lee J-H, Zhang J, Additive manufacturing of metallic materials: a review. J Materials Eng Performance, 2017.

  63. Trenfield SJ, Madla CM, Basit AW, Gaisford S Binder Jet Printing in Pharmaceutical Manufacturing, in 3D Printing of Pharmaceuticals, A.W. Basit and S. Gaisford, Editors. 2018, Springer International Publishing: Cham. p. 41–54.

  64. Bai Y, Wagner G, Williams CB Effect of particle size distribution on powder packing and sintering in binder jetting additive manufacturing of metals. J Manuf Sci Eng, 2017. 139(8).

  65. Miyanaji H et al (2018) Process development for green part printing using binder jetting additive manufacturing. Front Mech Eng 13(4):504–512

    Article  Google Scholar 

  66. Do T, Kwon P, Shin CS (2017) Process development toward full-density stainless steel parts with binder jetting printing. Int J Mach Tools Manuf 121:50–60

    Article  Google Scholar 

  67. Miyanaji H, Ma D, Atwater MA, Darling KA, Hammond VH, Williams CB (2020) Binder jetting additive manufacturing of copper foam structures. Additive Manuf 32: 100960.

  68. Fathi S, Dickens P, Hague R (2012) Jetting stability of molten caprolactam in an additive inkjet manufacturing process. Int J Adv Manuf Technol 59(1):201–212

    Article  Google Scholar 

  69. Snelling DA, Williams CB, Suchicital CTA, Druschitz AP Binder jetting advanced ceramics for metal-ceramic composite structures. Int J Adv Manuf Technol 2017. 92(1): 531–545.

  70. Ziaee M, Crane NB (2019) Binder jetting: A review of process, materials, and methods. Additive Manuf 28: 781–801.

  71. Lores A et al (2019) A review on recent developments in binder jetting metal additive manufacturing: materials and process characteristics. Powder Metall 62(5):267–296

    Article  Google Scholar 

  72. Li M, Du W, Elwany A, Pei Z, Ma C, Metal binder jetting additive manufacturing: a literature review. Journal of Manufacturing Science and Engineering, 2020. 142(9).

  73. Du W, Ren X, Pei Z, Ma C (2020) Ceramic binder jetting additive manufacturing: a literature review on density. J Manuf Sci Eng. 142(4).

  74. Mekonnen BG, Bright G, Walker A (2016) A study on state of the art technology of laminated object manufacturing (LOM), in CAD/CAM, Robotics and Factories of the Future, Springer. p 207–216.

  75. Razavykia A, Brusa E, Delprete C, Yavari R (2020) An overview of additive manufacturing technologies—a review to technical synthesis in numerical study of selective laser melting. Materials 13(17):3895

    Article  Google Scholar 

  76. Gibson I et al. (2021) Sheet Lamination, in Additive Manufacturing Technologies, Springer. p. 253–283.

  77. Upcraft S, Fletcher R (2003) The rapid prototyping technologies. Assem Autom 23(4):318–330

    Article  Google Scholar 

  78. Sing SL, Tey CF, Tan JHK, Huang S, Yeong WY 2—3D printing of metals in rapid prototyping of biomaterials: Techniques in additive manufacturing, in Rapid Prototyping of Biomaterials (Second Edition), R. Narayan, Editor 2020, Woodhead Publishing. p. 17–40.

  79. Molitch-Hou M, Overview of additive manufacturing process, in Additive Manufacturing, J. Zhang, Jung, Y-G., Editor 2018, Butterworth-Heinemann. p. 1–38.

  80. Mazumder J, 1—Laser-aided direct metal deposition of metals and alloys, in Laser Additive Manufacturing, M. Brandt, Editor 2017, Woodhead Publishing. p. 21–53.

  81. Pirch N, Linnenbrink S, Gasser A, Schleifenbaum H (2019) Laser-aided directed energy deposition of metal powder along edges. Int J Heat Mass Transf 143: 118464.

  82. Dutta B, Froes FH, Chapter 3—additive manufacturing technology, in additive manufacturing of titanium alloys, B. Dutta and F.H. Froes, Editors. 2016, Butterworth-Heinemann. p. 25–40.

  83. Dass A, Moridi A (2019) State of the art in directed energy deposition: from additive manufacturing to materials design. Coatings 9(7):418

    Article  Google Scholar 

  84. David JC, A.R.N., Edward WR, Allison MB, Nathan AK (2017) Effect of directed energy deposition processing parameters on laser deposited Inconel® 718: External morphology. J Laser Appl. 29(2): 022001.

  85. Jinoop A, Paul CP (2019) Bindra, KS, Laser-assisted directed energy deposition of nickel super alloys: a review. Proc Inst Mech Eng Part L 233(11):2376–2400

    Google Scholar 

  86. Durga Prasad Reddy R, Sharma V (2020) Additive manufacturing in drug delivery applications: a review. Int J Pharmaceutics, 589: p. 119820.

  87. Mohammed A, et al. (2020) Additive manufacturing technologies for drug delivery applications. Int J Pharmaceutics 580: 119245.

  88. Wang X et al (2017) 3D printing of polymer matrix composites: a review and prospective. Compos B Eng 110:442–458

    Article  Google Scholar 

  89. Gouge M, Chapter 4 - Conduction Losses due to Part Fixturing During Laser Cladding✶✶This chapter is based upon the original work published by Springer: MF Gouge, P. Michaleris, and TA Palmer. “Fixturing Effects in the Thermal Modeling of Laser Cladding. Journal of Manufacturing Science and Engineering 139.1 (2017): 011001. With the permission of Springer, in Thermo-Mechanical Modeling of Additive Manufacturing, M. Gouge and P. Michaleris, Editors. 2018, Butterworth-Heinemann. p. 61–79.

  90. Gibson, I., Rosen, D. W., Stucker, B., Additive manufacturing technologies. Vol. 17. 2014: Springer.

  91. Lee H et al (2017) Lasers in additive manufacturing: a review. Int J Precision Eng Manuf-Green Technol 4(3):307–322

    Article  Google Scholar 

  92. Mohammed A, Elshaer A, Sareh P, Elsayed M, Hassanin H (2020) Additive manufacturing technologies for drug delivery applications. Int J Pharmaceutics. 580: 119245.

  93. Ngo TD et al (2018) Additive manufacturing (3D printing): a review of materials, methods, applications and challenges. Compos B Eng 143:172–196

    Article  Google Scholar 

  94. Murr LE (2016) Frontiers of 3D printing/additive manufacturing: from human organs to aircraft fabrication†. J Mater Sci Technol 32(10):987–995

    Article  Google Scholar 

  95. Laguna OH, Lietor PF, Godino FJI, Corpas-Iglesias FA (2021) A review on additive manufacturing and materials for catalytic applications: milestones, key concepts, advances and perspectives. Materials Design 208: 109927.

  96. Kumar R, Kumar M, Chohan JS (2021) The role of additive manufacturing for biomedical applications: a critical review. J Manuf Processes 64: 828–850.

  97. Szymczyk-Ziółkowska P, Łabowska, Magdalena B, Detyna J, Michalak I, Gruber P (2020) A review of fabrication polymer scaffolds for biomedical applications using additive manufacturing techniques. Biocybernet Biomed Eng. 40(2): 624–638.

  98. Challagulla NV, Rohatgi V, Sharma D, Kumar R (2020) Recent developments of nanomaterial applications in additive manufacturing: a brief review. Curr Opin Chem Eng 28:75–82

    Article  Google Scholar 

  99. Al Rashid A, Khan SA, Al-Ghamdi G, Koç SM (2020) Additive manufacturing: technology, applications, markets, and opportunities for the built environment. Automation Construction. 118: 103268.

  100. Ryan KR, Down MP, Banks CE (2020) Future of additive manufacturing: overview of 4D and 3D printed smart and advanced materials and their applications. Chem Eng J: 126162.

  101. Han D, Lee H (2020) Recent advances in multi-material additive manufacturing: methods and applications. Curr Opin Chem Eng 28:158–166

    Article  Google Scholar 

  102. Dhavalikar P, Lan Z, Kar R, Salhadar K, Gaharwar AK, Cosgriff-Hernandez E (2020) 1.4.8 - Biomedical Applications of Additive Manufacturing, in Biomaterials Science (Fourth Edition), W.R. Wagner, et al., Editors. 2020, Academic Press. p. 623–640.e2.

  103. Mitchell A, Lafont U, Hołyńska M, Semprimoschnig C (2018) Additive manufacturing—A review of 4D printing and future applications. Addit Manuf 24:606–626

    Google Scholar 

  104. Vanmeensel K, Lietaert K, Vrancken B, Dadbakhsh S, Li X, Kruth J-P, Krakhmalev P, Yadroitsev I, Van Humbeeck J 8 - Additively manufactured metals for medical applications, in Additive Manufacturing, J. Zhang and Y.-G. Jung, Editors. 2018, Butterworth-Heinemann. p. 261–309.

  105. Goh GD, Agarwala S, Goh GL, Dikshit V, Sing SL, Yeong WY (2017) Additive manufacturing in unmanned aerial vehicles (UAVs): challenges and potential. Aerosp Sci Technol 63:140–151

    Article  Google Scholar 

  106. Huang X, Tepylo N, Pommier-Budinger V, Budinger M, Bonaccurso E, Villedieu P, Bennani L (2019) A survey of icephobic coatings and their potential use in a hybrid coating/active ice protection system for aerospace applications. Prog Aerosp Sci 105:74–97

    Article  Google Scholar 

  107. Najmon JC, Raeisi S, Tovar A 2 - Review of additive manufacturing technologies and applications in the aerospace industry, in Additive Manufacturing for the Aerospace Industry, F. Froes and R. Boyer, Editors. 2019, Elsevier. p. 7–31.

  108. Froes F, Boyer R, Dutta B 1 - Introduction to aerospace materials requirements and the role of additive manufacturing, in Additive Manufacturing for the Aerospace Industry, F. Froes and R. Boyer, Editors. 2019, Elsevier. p. 1–6.

  109. Wohlers A 3D Printing and Additive Manufacturing State of the Industry, 2017.

  110. Najmon JC, Raeisi S, Tovar A Review of additive manufacturing technologies and applications in the aerospace industry, in Additive Manufacturing for the Aerospace Industry, F. Froes and R. Boyer, Editors. 2019, Elsevier. p. 7–31.

  111. Withers JC 9—Fusion and/or solid state additive manufacturing for aerospace applications, in Additive Manufacturing for the Aerospace Industry, F. Froes and R. Boyer, Editors. 2019, Elsevier. p. 187–211.

  112. Kamal M, Rizza G, 4 - Design for metal additive manufacturing for aerospace applications, in Additive Manufacturing for the Aerospace Industry, F. Froes and R. Boyer, Editors. 2019, Elsevier. p. 67–86.

  113. Liu R, Wang Z, Sparks T, Liou F, Newkirk J 13—Aerospace applications of laser additive manufacturing, in Laser Additive Manufacturing, M. Brandt, Editor 2017, Woodhead Publishing. p. 351–371.

  114. Guo N, Leu MC (2013) Additive manufacturing: technology, applications and research needs. Front Mech Eng 8(3):215–243

    Article  Google Scholar 

  115. Liu R, Wang Z, Sparks T, Liou F, Newkirk J Aerospace applications of laser additive manufacturing, in Laser Additive Manufacturing, M. Brandt, Editor 2017, Woodhead Publishing. p. 351–371.

  116. Han P (2017) Additive design and manufacturing of jet engine parts. Engineering 3(5):648–652

    Article  Google Scholar 

  117. http://www.optomec.com/, O.

  118. http://www.arcam.com, A.A.B.

  119. Mori D Additive manufacturing for quality finished parts, Available from: http://us.dmgmori.com/blob/354972/7009c74e7ad96fad7ad34555d81bc316/pl0us14-lasertec-65-3d-pdf-data.pdf, 2014.

  120. Kurzynowski T, Pawlak A, Smolina I (2020) The potential of SLM technology for processing magnesium alloys in aerospace industry. Arch Civ Mech Eng 20(1):23

    Article  Google Scholar 

  121. Altıparmak SC, Xiao B (2021) A market assessment of additive manufacturing potential for the aerospace industry. J Manuf Process 68:728–738

    Article  Google Scholar 

  122. Koykendall J, CM, Holdowsky J, Mahto M (2014) Report on 3D Opportunity in Aerospace and Defense: Additive Manufacturing Takes Flight, in A Deloitte series on additive manufacturing

  123. Henderson MB, Arrell D, Larsson R, Heobel M, Marchant G (2004) Nickel based superalloy welding practices for industrial gas turbine applications. Sci Technol Weld Joining 9(1):13–21

    Article  Google Scholar 

  124. Portolés L, Jordá O, Jordá L, Uriondo A, Esperon-Miguez M, Perinpanayagam S (2016) A qualification procedure to manufacture and repair aerospace parts with electron beam melting. J Manuf Syst 41:65–75

    Article  Google Scholar 

  125. Zhou J, Tsai HL, Wang PC Hybrid laser-arc welding of aerospace and other materials, in Welding and Joining of Aerospace Materials, M.C. Chaturvedi, Editor 2012, Woodhead Publishing. 109–141.

  126. Feng G et al (2021) Comparison of welding residual stress and deformation induced by local vacuum electron beam welding and metal active gas arc welding in a stainless steel thick-plate joint. J Market Res 13:1967–1979

    Google Scholar 

  127. Vasileiou AN et al (2021) Development of microstructure and residual stress in electron beam welds in low alloy pressure vessel steels. Materials Design 209:109924

    Article  Google Scholar 

  128. Liu F, Ji X, Hu G, Gao J (2019) A novel shape-adjustable surface and its applications in car design. Appl Sci 9(11):2339

    Article  Google Scholar 

  129. Costa C, Aguzzi J (2015) Temporal shape changes and future trends in European automotive design. Machines 3(3):256–267

    Article  Google Scholar 

  130. Leal R, Barreiros FM, Alves L, Romeiro F, Vasco JC, Santos M, Marto C (2017) Additive manufacturing tooling for the automotive industry. Int J Adv Manuf Technol 92(5):1671–1676

    Article  Google Scholar 

  131. Garrett B (2014) 3D printing: new economic paradigms and strategic shifts. Global Pol 5(1):70–75

    Article  Google Scholar 

  132. Gao W, Zhang Y, Ramanujan D, Ramani K, Chen Y, Williams CB, Wang CCL, Shin YC, Zhang S, Zavattieri PD The status, challenges, and future of additive manufacturing in engineering. Comput-Aided Design, 2015. 69(Supplement C): 65–89.

  133. Khajavi SH, Partanen J, Holmström J (2014) Additive manufacturing in the spare parts supply chain. Comput Ind 65(1):50–63

    Article  Google Scholar 

  134. Delic M, Eyers DR (2020) The effect of additive manufacturing adoption on supply chain flexibility and performance: an empirical analysis from the automotive industry. Int J Production Econ 228:107689

    Article  Google Scholar 

  135. Chan HK, Griffin J, Lim JJ, Zeng F, Chiu ASF (2018) The impact of 3D Printing Technology on the supply chain: manufacturing and legal perspectives. Int J Prod Econ 205:156–162

    Article  Google Scholar 

  136. Delic M, Eyers DR, Mikulic J (2019) Additive manufacturing: empirical evidence for supply chain integration and performance from the automotive industry. Supply Chain Manag 24(5):604–621

    Article  Google Scholar 

  137. Eyers Daniel R, Potter Andrew T, Gosling J, Naim Mohamed M (2018) The flexibility of industrial additive manufacturing systems. Int J Oper Prod Manag 38(12):2313–2343

    Article  Google Scholar 

  138. Schniederjans DG (2017) Adoption of 3D-printing technologies in manufacturing: A survey analysis. Int J Prod Econ 183:287–298

    Article  Google Scholar 

  139. Bogue R (2013) 3D printing: the dawn of a new era in manufacturing? Assem Autom 33(4):307–311

    Article  Google Scholar 

  140. Giffi CA, Gangula B (2014) 3D opportunity for the automotive industry: Additive manufacturing hits the road, Deloitte University Press, Westlake, Texas.

  141. Thomas-Seale LEJ, Kirkman-Brown JC, Attallah MM, Espino DM, Shepherd DET (2018) The barriers to the progression of additive manufacture: Perspectives from UK industry. Int J Prod Econ 198:104–118

    Article  Google Scholar 

  142. Weller C, Kleer R, Piller FT (2015) Economic implications of 3D printing: market structure models in light of additive manufacturing revisited. Int J Prod Econ 164:43–56

    Article  Google Scholar 

  143. Yadav DK, Srivastava R, Dev S (2020) Design & fabrication of ABS part by FDM for automobile application. Mater Today 26:2089–2093

    Google Scholar 

  144. Gilmour L Emerging Trends In Additive Manufacturing for Health Care. 2020; Available from: https://www.sme.org/technologies/articles/2020/may/emerging-trends-in-additive-manufacturing-for-health-care/.

  145. Javaid M, Haleem A (2018) Additive manufacturing applications in medical cases: a literature based review. Alexandria J Med 54(4):411–422

    Article  Google Scholar 

  146. Culmone C, Smit G, Breedveld P (2019) Additive manufacturing of medical instruments: a state-of-the-art review. Addit Manuf 27:461–473

    Google Scholar 

  147. Puppi D, Chiellini F (2020) Biodegradable polymers for biomedical additive manufacturing. Appl Materials Today 20: 100700.

  148. Galante R, Figueiredo-Pina CG, Serro AP (2019) Additive manufacturing of ceramics for dental applications: a review. Dent Mater 35(6):825–846

    Article  Google Scholar 

  149. Ryan CNM, Fuller KP, Larrañaga A, Biggs M, Bayon Y, Sarasua JR, Pandit A, Zeugolis DI (2015) An academic, clinical and industrial update on electrospun, additive manufactured and imprinted medical devices. Expert Rev Med Devices 12(5):601–612

    Article  Google Scholar 

  150. Sabahi N, Chen W, Wang C-H, Kruzic JJ, Li X (2020) A review on additive manufacturing of shape-memory materials for biomedical applications. JOM 72(3):1229–1253

    Article  Google Scholar 

  151. Miljanovic D, Seyedmahmoudian M, Stojcevski A, Horan B Design and fabrication of implants for mandibular and craniofacial defects using different medical-additive manufacturing technologies: a review. Ann Biomed Eng 2020.

  152. Almeida HA, Costa AF, Ramos C, Torres C, Minondo M, Bártolo PJ, Nunes A, Kemmoku D, da Silva JVL Additive manufacturing systems for medical applications: case studies, in additive manufacturing—developments in training and education, E. Pei, M. Monzón, and A. Bernard, Editors. 2019, Springer International Publishing: Cham. p. 187–209.

  153. Alqahtani MS, Al-Tamimi A, Almeida H, Cooper G, Bartolo P (2020) A review on the use of additive manufacturing to produce lower limb orthoses. Progress Additive Manuf 5(2):85–94

    Article  Google Scholar 

  154. Nazir A, Abate KM, Kumar A, Jeng J-Y (2019) A state-of-the-art review on types, design, optimization, and additive manufacturing of cellular structures. Int J Adv Manuf Technol 104(9):3489–3510

    Article  Google Scholar 

  155. Wohlers, Additive manufacturing and 3D printing: State of the industry, 2013. p 14.

  156. Barone S, Casinelli M, Frascaria M, Paoli A, Razionale AV (2016) Interactive design of dental implant placements through CAD-CAM technologies: from 3D imaging to additive manufacturing. Int J Interactive Design Manuf (IJIDeM) 10(2):105–117

    Article  Google Scholar 

  157. Javaid M, Haleem A (2019) Current status and applications of additive manufacturing in dentistry: a literature-based review. J Oral Biol Craniofacial Res 9(3):179–185

    Article  Google Scholar 

  158. Rückschloß T, Ristow O, Müller M, Kühle R, Zingler S, Engel M, Hoffmann J, Freudlsperger C (2019) Accuracy of patient-specific implants and additive-manufactured surgical splints in orthognathic surgery—a three-dimensional retrospective study. J Cranio-Maxillofacial Surg 47(6):847–853

    Article  Google Scholar 

  159. Lowther M, Louth S, Davey A, Hussain A, Ginestra P, Carter L, Eisenstein N, Grover L, Cox S (2019) Clinical, industrial, and research perspectives on powder bed fusion additively manufactured metal implants. Addit Manuf 28:565–584

    Google Scholar 

  160. Zhou J, Pan B, Yang Q, Zhao Y, He L, Lin L, Sun H, Song Y, Yu X, Sun Z, Jiang H (2016) Three-dimensional autologous cartilage framework fabrication assisted by new additive manufactured ear-shaped templates for microtia reconstruction. J Plast Reconstr Aesthet Surg 69(10):1436–1444

    Article  Google Scholar 

  161. Kang H-W, Lee SJ, Ko IK, Kengla C, Yoo JJ, Atala A (2016) A 3D bioprinting system to produce human-scale tissue constructs with structural integrity. Nat Biotechnol 34:312

    Article  Google Scholar 

  162. Putra NE, Mirzaali MJ, Apachitei I, Zhou J, Zadpoor AA (2020) Multi-material additive manufacturing technologies for Ti-, Mg-, and Fe-based biomaterials for bone substitution. Acta Biomater 109:1–20

    Article  Google Scholar 

  163. Carluccio, D., Xu, C., Venezuela, J., Cao, Y., Kent, D., Bermingham, M., Demir, Ali G., Previtali, B., Ye, Q., Dargusch, M., Additively manufactured iron-manganese for biodegradable porous load-bearing bone scaffold applications. Acta Biomaterialia, 2020. 103: p. 346–360.

  164. Qu H (2020) Additive manufacturing for bone tissue engineering scaffolds. Materials Today Commun 24:101024

    Article  Google Scholar 

  165. Garreta E et al (2017) Tissue engineering by decellularization and 3D bioprinting. Mater Today 20(4):166–178

    Article  Google Scholar 

  166. Wu Y-HA et al (2019) 3D-printed bioactive calcium silicate/poly-ε-caprolactone bioscaffolds modified with biomimetic extracellular matrices for bone regeneration. Int J Mol Sci 20(4):942

    Article  Google Scholar 

  167. Banks J (2013) Adding value in additive manufacturing: researchers in the united kingdom and europe look to 3D printing for customization. IEEE Pulse 4(6):22–26

    Article  Google Scholar 

  168. Parthasarathy J, Starly B, Raman S (2011) A design for the additive manufacture of functionally graded porous structures with tailored mechanical properties for biomedical applications. J Manuf Process 13(2):160–170

    Article  Google Scholar 

  169. Gaytan SM, Murr LE, Martinez E, Martinez JL, Machado BI, Ramirez DA, Medina F, Collins S, Wicker RB (2010) Comparison of microstructures and mechanical properties for solid and mesh cobalt-base alloy prototypes fabricated by electron beam melting. Metall and Mater Trans A 41(12):3216–3227

    Article  Google Scholar 

  170. Bose S, Tarafder S (2012) Calcium phosphate ceramic systems in growth factor and drug delivery for bone tissue engineering: a review. Acta Biomater 8(4):1401–1421

    Article  Google Scholar 

  171. Zein NN, Hanouneh IA, Bishop PD, Samaan M, Eghtesad B, Quintini C, Miller C, Yerian L, Klatte R (2013) Three-dimensional print of a liver for preoperative planning in living donor liver transplantation. Liver Transpl 19(12):1304–1310

    Article  Google Scholar 

  172. Ahmadi SM, Kumar R, Borisov EV, Petrov R, Leeflang S, Li Y, Tümer N, Huizenga R, Ayas C, Zadpoor AA, Popovich VA (2019) From microstructural design to surface engineering: a tailored approach for improving fatigue life of additively manufactured meta-biomaterials. Acta Biomater 83:153–166

    Article  Google Scholar 

  173. Melancon D, Bagheri ZS, Johnston RB, Liu L, Tanzer M, Pasini D (2017) Mechanical characterization of structurally porous biomaterials built via additive manufacturing: experiments, predictive models, and design maps for load-bearing bone replacement implants. Acta Biomater 63:350–368

    Article  Google Scholar 

  174. Harun WSW, Kamariah MSIN, Muhamad N, Ghani SAC, Ahmad F, Mohamed Z (2018) A review of powder additive manufacturing processes for metallic biomaterials. Powder Technol 327:128–151

    Article  Google Scholar 

  175. Kumar R, Kumar M, Chohan JS (2021) The role of additive manufacturing for biomedical applications: a critical review. J Manuf Process 64:828–850

    Article  Google Scholar 

  176. Sanghera B, et al. Preliminary study of rapid prototype medical models. Rapid Prototyping J 2001.

  177. Jamieson R, Holmer B, Ashby A (1995) How rapid prototyping can assist in the development of new orthopaedic products—a case study. Rapid Prototyping J 1(4):38–41

    Article  Google Scholar 

  178. Ripley B et al (2016) 3D printing based on cardiac CT assists anatomic visualization prior to transcatheter aortic valve replacement. J Cardiovasc Comput Tomogr 10(1):28–36

    Article  Google Scholar 

  179. Pietrabissa A et al (2016) From CT scanning to 3-D printing technology for the preoperative planning in laparoscopic splenectomy. Surg Endosc 30(1):366–371

    Article  Google Scholar 

  180. Hieu LC et al (2003) Design for medical rapid prototyping of cranioplasty implants. Rapid Prototyping J 9(3):175–186

    Article  Google Scholar 

  181. Hochman JB et al (2015) Comparison of cadaveric and isomorphic three-dimensional printed models in temporal bone education. Laryngoscope 125(10):2353–2357

    Article  Google Scholar 

  182. Cohen J, Reyes SA (2015) Creation of a 3D printed temporal bone model from clinical CT data. Am J Otolaryngol 36(5):619–624

    Article  Google Scholar 

  183. Cohen A et al (2009) Mandibular reconstruction using stereolithographic 3-dimensional printing modeling technology. Oral Surg Oral Med Oral Pathol Oral Radiol Endodontol 108(5):661–666

    Article  Google Scholar 

  184. Auricchio F, Marconi S (2016) 3D printing: clinical applications in orthopaedics and traumatology. EFORT Open Rev 1(5):121–127

    Article  Google Scholar 

  185. Sing SL et al (2016) Laser and electron-beam powder-bed additive manufacturing of metallic implants: a review on processes, materials and designs. J Orthop Res 34(3):369–385

    Article  Google Scholar 

  186. Dodziuk H (2016) Applications of 3D printing in healthcare. Kardiochirurgia i Torakochirurgia Polska/Polish Journal of Thoracic and Cardiovascular Surgery 13(3):283–293

    Google Scholar 

  187. Tanaka KS, Lightdale-Miric N (2016) Advances in 3D-printed pediatric prostheses for upper extremity differences. JBJS. 98(15).

  188. Whitley D, ERS, Rudek I, Bencharit S (2017) In-office fabrication of dental implant surgical guides using desktop stereolithographic printing and implant treatment planning software: a clinical report. J Prosthetic Dentistry 118(3): 256–63.

  189. Fina F, MC, Goyanes A, Zhang J, Gaisford S, Basit AW (2018) Fabricating 3D printed orally disintegrating printlets using selective laser sintering. Int J Pharmaceutics 541(1): 101-107

  190. Pereira BC et al (2019) ‘Temporary Plasticiser’: a novel solution to fabricate 3D printed patient-centred cardiovascular ‘Polypill’architectures. Eur J Pharm Biopharm 135:94–103

    Article  Google Scholar 

  191. Awad A et al (2019) 3D printed pellets (miniprintlets): A novel, multi-drug, controlled release platform technology. Pharmaceutics 11(4):148

    Article  Google Scholar 

  192. Zuniga JM et al (2018) Coactivation index of children with congenital upper limb reduction deficiencies before and after using a wrist-driven 3D printed partial hand prosthesis. J Neuroeng Rehabil 15(1):1–11

    Article  Google Scholar 

  193. Paolini A, Kollmannsberger S, Rank E (2019) Additive manufacturing in construction: a review on processes, applications, and digital planning methods. Additive Manuf 30:100894

    Article  Google Scholar 

  194. Labonnote N, Rønnquist A, Manum B, Rüther P (2016) Additive construction: State-of-the-art, challenges and opportunities. Autom Constr 72:347–366

    Article  Google Scholar 

  195. Pegna J (1997) Exploratory investigation of solid freeform construction. Autom Constr 5(5):427–437

    Article  Google Scholar 

  196. Baumgartner S, Gmeiner R, Schönherr JA, Stampfl J (2020) Stereolithography-based additive manufacturing of lithium disilicate glass ceramic for dental applications. Materials Sci Eng 116:111180

    Article  Google Scholar 

  197. Zhang H, Yang Y, Hu K, Liu B, Liu M, Huang Z (2020) Stereolithography-based additive manufacturing of lightweight and high-strength Cf/SiC ceramics. Addit Manuf 34:101199

    Google Scholar 

  198. Raynaud J, Pateloup V, Bernard M, Gourdonnaud D, Passerieux D, Cros D, Madrangeas V, Chartier T (2020) Hybridization of additive manufacturing processes to build ceramic/metal parts: Example of LTCC. J Eur Ceram Soc 40(3):759–767

    Article  Google Scholar 

  199. Aramian A, Razavi SMJ, Sadeghian Z, Berto F (2020) A review of additive manufacturing of cermets. Additive Manuf 33:101130

    Article  Google Scholar 

  200. Aramian A, Sadeghian Z, Prashanth KG, Berto F (2020) In situ fabrication of TiC-NiCr cermets by selective laser melting. Int J Refractory Metals Hard Materials. 87:105171

    Article  Google Scholar 

  201. Shakor P, Nejadi S, Paul G, Malek S (2019) Review of emerging additive manufacturing technologies in 3d printing of cementitious materials in the construction industry. Front Built Environ. 4(85).

  202. Delgado Camacho D, Clayton P, O’Brien WJ, Seepersad C, Juenger M, Ferron R, Salamone S (2018) Applications of additive manufacturing in the construction industry—a forward-looking review. Automation Construction. 89:110–119

    Article  Google Scholar 

  203. Bhardwaj A, Jones SZ, Kalantar N, Pei Z, Vickers J, Wangler T, Zavattieri P, Zou N Additive manufacturing processes for infrastructure construction: a review. J Manuf Sci Eng 2019. 141(9).

  204. Gosselin C, Duballet R, Roux P, Gaudillière N, Dirrenberger J, Morel P (2016) Large-scale 3D printing of ultra-high performance concrete—a new processing route for architects and builders. Mater Des 100:102–109

    Article  Google Scholar 

  205. Kleer R, Piller FT (2019) Local manufacturing and structural shifts in competition: Market dynamics of additive manufacturing. Int J Prod Econ 216:23–34

    Article  Google Scholar 

  206. Savolainen J, Collan M (2020) How additive manufacturing technology changes business models?—review of literature. Additive Manuf 32: 101070.

  207. Strong D, Kay M, Conner B, Wakefield T, Manogharan G (2018) Hybrid manufacturing—integrating traditional manufacturers with additive manufacturing (AM) supply chain. Addit Manuf 21:159–173

    Google Scholar 

  208. Vanderploeg A, Lee S-E, Mamp M (2017) The application of 3D printing technology in the fashion industry. Int J Fashion Design Technol Educ 10(2):170–179

    Article  Google Scholar 

  209. Srivastava M, Rathee S, Maheshwari S, Siddiquee AN, Kundra TK (2019) A review on recent progress in solid state friction based metal additive manufacturing: friction stir additive techniques. Crit Rev Solid State Mater Sci 44(5):345–377

    Article  Google Scholar 

  210. Sealy MP et al Hybrid processes in additive manufacturing. J Manuf Sci Eng 2018. 140(6).

  211. Stavropoulos P et al (2020) Hybrid subtractive–additive manufacturing processes for high value-added metal components. Int J Adv Manuf Technol 111(3):645–655

    Article  Google Scholar 

  212. Rathee S, Srivastava M, Pandey PM, Mahawar A, Shukla S (2021) Metal additive manufacturing using friction stir engineering: a review on microstructural evolution, tooling and design strategies. CIRP J Manuf Sci Technol 35:560–588

    Article  Google Scholar 

  213. Rathee S, Maheshwari S, Noor Siddiquee A, Srivastava M (2018) A review of recent progress in solid state fabrication of composites and functionally graded systems via friction stir processing. Crit Rev Solid State Mater Sci 43(4):334–366

    Article  Google Scholar 

  214. Pandey PM, Rathee S, Srivastava M, Jain PK (2021) Functionally graded materials (FGMs): fabrication, properties, applications, and advancements, 1st edn. CRC Press. https://doi.org/10.1201/9781003097976

Download references

Acknowledgements

One of the authors Dr. Manu Srivastava is grateful to PDPM IIITDM Jabalpur for its financial assistance (vide sanction order no. PDPM IIITDMJ/Dir Off/ 109/2020/10/36) to undertake the present work.

Author information

Authors and Affiliations

  1. Department of Mechanical Engineering, PDPM Indian Institute of Information Technology Design and Manufacturing, Jabalpur, India

    Manu Srivastava

  2. Department of Mechanical Engineering, National Institute of Technology Srinagar, Srinagar, Jammu & Kashmir, India

    Sandeep Rathee

Authors
  1. Manu Srivastava
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Sandeep Rathee
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Sandeep Rathee.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Srivastava, M., Rathee, S. Additive manufacturing: recent trends, applications and future outlooks. Prog Addit Manuf 7, 261–287 (2022). https://doi.org/10.1007/s40964-021-00229-8

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s40964-021-00229-8

Keywords

Search

Navigation