Abstract
The main bearing is a key component to maintaining the stable and safe operation of the gas generator power end, so fault diagnosis for the main bearing has special significance. To decrease the impact of data distribution shift on feature extraction performance, a symbolic feature extraction method based on improved spatial distribution Mel-Frequency Cepstrum Coefficient (IMFCC) is proposed. In addition, to extract constraint features more fully, fault data is fed into the spatial visual attention mechanism network in the form of patch blocks. Specifically, this paper first uses the Fourier transform to perform spectrum analysis on the original five fault types of vibration signals. Based on analyzing the frequency band range with high discrimination of different fault types, IMFCC filter banks are constructed to enhance the representation ability of symbolic features and improve fault diagnosis performance under data distribution shift. Secondly, the extracted features are used to construct a three-dimensional (3D) spatial sample dataset. The dataset is split into a combination of patch blocks along the spatial dimension. Finally, combining spatial attention network and distribution attention network to extract the spatial constraint feature and distribution constraint feature of patch blocks. Two public rolling bearing datasets are implemented to demonstrate the effectiveness of the proposed method. Subsequently, the proposed method is applied to the fault diagnosis of the main bearing from a waste landfill gas generator in real industrial environment, which proves the feasibility of the method.
Similar content being viewed by others
References
Zhao YJ, Zhou ML, Xu XZ, Zhang NN (2023) Fault diagnosis of rolling bearing with noise signal based on modified kernel principal component analysis and DC-ResNet. CAAI Trans Intell Technol 8(3):1014–1028
Arun P, Lincon SA, Prabhakaran N (2018) Detection and characterization of bearing faults from the frequency domain features of vibration. IETE J Res 64(5):634–647
Elsisi M, Tran MQ (2021) Development of an IoT architecture based on a deep neural network against cyber attacks for automated guided vehicles. Sensors 21(24):8467
Tran MQ, Amer M, Dababat A et al (2023) Robust fault recognition and correction scheme for induction motors using an effective IoT with deep learning approach. Measurement 207:112398
Vanchinathan K, Valluvan KR, Gnanavel C et al (2021) An improved incipient whale optimization algorithm based robust fault detection and diagnosis for sensorless brushless DC motor drive under external disturbances. Int Trans Electr Energy Syst 31(12):e13251
Wadhwani S, Gupta SP, Kumar V (2008) Fault classification for rolling element bearing in electric machines. IETE J Res 54(4):264–275
Dubey R, Rajpoot V, Chaturvedi A et al (2022) Ball-bearing fault classification using comparative analysis of wavelet coefficient based on entropy measurement. IETE J Res 1–11
Nayak JR, Shaw B, Sahu BK (2022) A fuzzy adaptive symbiotic organism search based hybrid wavelet transform-extreme learning machine model for load forecasting of power system: a case study. J Ambient Intell Humaniz Comput 14(8):10833–10847
Agrawal S, Mohanty SR, Agarwal V (2015) Bearing fault detection using hilbert and high frequency resolution techniques. IETE J Res 61(2):99–108
Singh AA, Harikrishnan CI, Tiwari SK et al (2022) Investigation on multi-entropy and multi-statistical features fusion approach for fault detection in rolling bearing using VMD. IETE J Res
Chandel AK, Patel RK (2013) Bearing fault classification based on wavelet transform and artificial neural network. IETE J Res 59(3):219–225
Li N, Huang WG, Guo WJ et al (2020) Multiple enhanced sparse decomposition for gearbox compound fault diagnosis. IEEE Trans Instrum Meas 69(3):770–781
Dong S, Wang P, Abbas K (2021) A survey on deep learning and its applications. Comput Sci Rev 40:100379
Liu, ZW (2022) Bearing fault diagnosis of end-to-end model design based on 1DCNN-GRU network. discrete Dyn Nat Soc 2022
Han SY, Shao HD, Huo ZQ et al (2022) End-to-end chiller fault diagnosis using fused attention mechanism and dynamic cross-entropy under imbalanced datasets. Build Environ 212:108821
Yu WB, Lv P (2021) An end-to-end intelligent fault diagnosis application for rolling bearing based on MobileNet. IEEE Access 9:41925–41933
Lei ZH, Wen GR, Dong SZ et al (2021) An intelligent fault diagnosis method based on domain adaptation and its application for bearings under polytropic working conditions. IEEE Trans Instrum Meas 70:1–14
Yao P, Wang JX, Zhang FY et al (2022) Intelligent rolling bearing imbalanced fault diagnosis based on mel-frequency cepstrum coefficient and convolutional neural networks. Measurement 205:112143
Liang PF, Deng C, Wu J et al (2020) Intelligent fault diagnosis of rotating machinery via wavelet transform, generative adversarial nets and convolutional neural network. Measurement 159:107768
Myburgh JC, Mouton C, Davel MH (2020) Tracking translation invariance in CNNs. In: Southern African conference for artificial intelligence research
Chen JB, Huang RY, Zhao K et al (2021) Multiscale convolutional neural network with feature alignment for bearing fault diagnosis. IEEE Trans Instrum Meas 70:1–10
Hu Q, Si XS, Qin AS (2022) Balanced adaptation regularization based transfer learning for unsupervised cross domain fault diagnosis. IEEE Sens J 22(12):12139–12151
Yang P, Geng HL, Liu P et al (2022) A domain adaptation model based on multiscale residual networks for aeroengine bearing cross-domain fault diagnosis. Meas Control 56(5):975–988
Qin AS, Mao HL, Sun KC et al (2022) Cross-domain fault diagnosis based on improved multi-scale fuzzy measure entropy and enhanced joint distribution adaptation. IEEE Sens J 22(10):9649–9664
Tran MQ, Liu MK, Tran QV et al (2022) Effective Fault Diagnosis Based on Wavelet and Convolutional Attention Neural Network for Induction Motors. IEEE Transactions on Instrumentation and Measurement 71
Li XD, Zheng JH, Li MT et al (2021) Frequency-domain fusing convolutional neural network: a unified architecture improving effect of domain adaptation for fault diagnosis. Sensors 21(2):450
Zhao YJ, Qin BF, Zhou YH et al (2023) Bearing fault diagnosis based on inverted Mel-scale frequency cepstral coefficients and deformable convolution networks. Meas Sci Technol 34(5):055404
Choudakkanavar G, Mangai JA, Bansal M (2022) MFCC based ensemble learning method for multiple fault diagnosis of roller bearing. Int J Inf Technol 14(5):2741–2751
Li GQ, Wu J, Deng C et al (2022) Parallel multi-fusion convolutional neural networks based fault diagnosis of rotating machinery under noisy environments. ISA Trans 128:545–555
Guo MH, Xu TX, Liu JJ et al (2022) Attention mechanisms in computer vision: a survey. Comput Visual Media 8(3):331–368
Li W, Liu K, Zhang LZ et al (2020) Object detection based on an adaptive attention mechanism. Sci Rep 10(1):11307
Li XH, Wan SK, Liu SJ et al (2022) Bearing fault diagnosis method based on attention mechanism and multilayer fusion network. ISA Trans 128:550–564
Mei XG, Pan ET, Ma Y et al (2019) Spectral-spatial attention networks for hyperspectral image classification. Remote Sens 11(8):963
Murali P, Revathy R, Balamurali S et al (2020) Integration of RNN with GARCH refined by whale optimization algorithm for yield forecasting: a hybrid machine learning approach. J Ambient Intell Humaniz Comput
Lin WC, Tsai CF, Zhong JR (2022) Deep learning for missing value imputation of continuous data and the effect of data discretization. Knowl-Based Syst 239:108079
Mehr AD, Ghiasi AR, Yaseen ZM et al (2022) A novel intelligent deep learning predictive model for meteorological drought forecasting. J Ambient Intell Humaniz Comput
Kim J, Moon N (2019) BiLSTM model based on multivariate time series data in multiple field for forecasting trading area. J Ambient Intell Humaniz Comput
Wang B, Lei YG, Li NP et al (2020) A hybrid prognostics approach for estimating remaining useful life of rolling element bearings. IEEE Trans Reliab 61(1):401–412
Wang Y, Yang MM, Zhang YP et al (2021) A bearing fault diagnosis model based on deformable atrous convolution and squeeze-and-excitation aggregation. IEEE Trans Instrum Meas 70:1–10
Vanchinathan K, Valluvan KR, Gnanavel C et al (2022) Numerical simulation and experimental verification of fractional-order PIλ controller for solar PV fed sensorless brushless dc motor using whale optimization algorithm. Electr Power Compon Syst 50(1):64–80
Vanchinathan K, Valluvan KR, Gnanavel C et al (2021) Design methodology and experimental verification of intelligent speed controllers for sensorless permanent magnet Brushless DC motor. Int Trans on Electr Energy Syst 31(9):e12991
Khare SK, Bajaj V (2021) Time-frequency representation and convolutional neural network-based emotion recognition. IEEE Trans Neural Netw Learn Syst 32(7):2901–2909
Dosovitskiy A, Beyer L, Kolesnikov A et al (2020) An image is worth 16×16 words: transformers for image recognition at scale. https://doi.org/10.48550/arXiv.2010.11929
Chen YS, Jiang HL, Li CY et al (2016) Deep feature extraction and classification of hyperspectral images based on convolutional neural networks. IEEE Trans Geosci Remote Sens 54(10):6232–6251
Zhang AS, Li SB, Cui YX et al (2019) Limited data rolling bearing fault diagnosis with few-shot learning. IEEE Access 7:110895–110904
Xu PH, Zhang LJ (2023) A fault diagnosis method for rolling bearing based on 1D-ViT model. IEEE Access 11:39664–39674
Zhang FQ, Yin ZY, Xu FL et al (2023) MAB-DrNet: bearing fault diagnosis method based on an improved dilated convolutional neural network. Sensors 23(12):5532
Meng Z, Luo C, Li JM et al (2023) Research on fault diagnosis of rolling bearing based on lightweight model with multiscale features. IEEE Sens J 23(12):13236–13247
Zhong K, Han M, Qiu T et al (2020) Fault diagnosis of complex processes using sparse kernel local fisher discriminant analysis. IEEE Trans Neural Netw Learn Syst 31(5):1581–1591
Acknowledgements
We wish to thank the anonymous reviewers for their valuable suggestions and comments on this paper. This research was funded by the Foundation of the National Natural Science Foundation of China grant numbers 61973105, 61573130 and 52177039; The Key Technologies R & D Program of Henan Province of China (NO.212102210145, 212102210197 and NO.222102220016).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
No potential conflict of interest was reported by the authors.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Zhao, Y., Bao, W. & Xu, X. Rolling Bearing Fault Diagnosis with Distribution Shift Data Using Improved Spatial Distribution Filters and Constraint Feature Extraction. J. Electr. Eng. Technol. 19, 3749–3763 (2024). https://doi.org/10.1007/s42835-024-01827-6
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s42835-024-01827-6