Abstract
The growing maturity of nanofabrication has ushered massive sophisticated optical structures available on a photonic chip. The integration of subwavelength-structured metasurfaces and metamaterials on the canonical building block of optical waveguides is gradually reshaping the landscape of photonic integrated circuits, giving rise to numerous meta-waveguides with unprecedented strength in controlling guided electromagnetic waves. Here, we review recent advances in meta-structured waveguides that synergize various functional subwavelength photonic architectures with diverse waveguide platforms, such as dielectric or plasmonic waveguides and optical fibers. Foundational results and representative applications are comprehensively summarized. Brief physical models with explicit design tutorials, either physical intuition-based design methods or computer algorithms-based inverse designs, are cataloged as well. We highlight how meta-optics can infuse new degrees of freedom to waveguide-based devices and systems, by enhancing light-matter interaction strength to drastically boost device performance, or offering a versatile designer media for manipulating light in nanoscale to enable novel functionalities. We further discuss current challenges and outline emerging opportunities of this vibrant field for various applications in photonic integrated circuits, biomedical sensing, artificial intelligence and beyond.
Similar content being viewed by others
Introduction
Efficient manipulation of guided electromagnetic waves is of vital significance in numerous applications in nanophotonics and integrated optics. Distinctive from its electronic counterparts, photonic integrated circuits deploy guided light waves instead of electrical signals to carry information1,2. As the bandwidth and power density limit of data transport in electrical wires are increasingly manifesting with higher integration density3, integrated optical scenarios have shown promising inroads towards ultrafast and broadband information processing with low power consumption that may potentially circumvent current electrical bottleneck4,5,6. Various applications have been reported in this field such as chip-scale optical signal processing, communications, and analog computing7,8,9, as well as emerging technologies in quantum, biomedicine, and sensing10,11.
However, recent advancements of photonic integrated circuits are hindered by limitations in its most fundamental building block of traditional optical waveguides, in terms of restrained accessible functionalities, compromised efficiency and bulk footprint12,13,14. The very limited design library of conventional waveguide structures substantially constraints their function- alities12,15 to mostly mere waveguiding. For instance, dielectric waveguides are ubiquitously applied to control on-chip propagating modes, while plasmonic waveguides play an essential role in guiding surface waves. Optical fibers are ideal for long-distance information communications and optical connections between chips and boards. However, the continuous trend towards miniaturized and versatile photonic systems demands more complicated device functions to be realized in a compact, multifunctional, configurable and CMOS-compatible way1.
Fulfillment of these tasks will entail novel waveguide structures. Fortunately, recent advent of metasurfaces and metamaterials opens a new pathway towards powerful light manipulation by engineering photonic structures in subwavelength scale14,15. Transferring the concept of meta-optics into guided waves can help overcome the abovementioned challenges12, by infusing new degrees of freedom into waveguide landscapes to dramatically boost device performance and enable novel functionalities12,13,14,15,16.
Optical metasurfaces and metamaterials are generally composed of judiciously designed artificial structures with feature size much smaller than light wavelength16,17. Metamaterials constructed by three-dimensional bulk subwavelength architectures can realize spatially changing exotic optical parameters (including the permittivity and permeability), giving rise to the transformation optics for invisibility cloaks and slow light phenomena18,19,20. Metasurfaces, in contrast, applying two-dimensional arrays of scatterers21,22,23, also exhibit unprecedented flexibility in controlling the fundamental attributes of electromagnetic waves, such as the amplitude, phase, polarization, wavefront, and so on. Fruitful applications are also reported such as metalens24,25,26, efficient holograms27,28, functional coatings29, color display30,31, LiDAR32 and nonlinear optics33,34. Previous research attentions are mainly devoted to free-space applications. However, recent years have seen a tremendous interest in synergizing meta-optics with various optical waveguides to largely empower conventional photonic devices12,13,14,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64,65,66,67,68,69,70,71,72,73,74,75,76,77,78,79,80,81,82,83,84,85,86,87,88,89,90,91,92,93,94,95,96,97,98,99,100,101,102,103,104,105,106,107,108,109,110. The advancement of subwavelength meta-structured waveguides can not only extend meta-optics physics to the realm of guided electromagnetic waves, but also promise to reshape the landscapes of photonic integrated circuits and massive emergent applications such as lab-on-chip technologies and neuromorphic photonics8,12,13,59,60.
In this review, we discuss recent progress on various subwavelength meta-structured waveguides, encompassing a broad class of photonic devices and systems that ally metamaterials and metasurfaces with diverse optical waveguides (dielectric/plasmonic/optical fibers)35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64,65,66,67,68,69,70,71,72,73,74,75,76,77,78,79,80,81,82,83,84,85,86,87,88,89,90,91,92,93,94,95,96,97,98,99,100,101,102,103,104,105,106,107,108,109,110. Brief physical fundamentals with explicit design methods and representative applications for meta-waveguides are comprehensively summarized. We highlight how incorporating the concepts of meta-optics with waveguide technologies can propel photonic integrated circuits into new heights, by providing versatile efficient coupling interfaces35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50, novel on-chip optical signal processing paradigms12,51,52,53,54,55,56,57,58,59,60,61,62,63,64,65,66,67,68,69,70,71,72,73 and diverse platforms for sensing, imaging and artificial intelligence57,58,59,60,74,75,76. We further comment on current challenges in device design and practical hurdles from ripening into viable technology. Potential future research directions are also discussed based on current perspectives.
Meta-waveguide fundamentals and properties
As is illustrated in Fig. 1a, b, meta-waveguides can be classified via either design methods or underpinning waveguide platforms12,13:
-
On the one hand, meta-waveguides can be conceived by physical intuition-based approaches (namely forward design henceforth) by leveraging the toolbox of metasurfaces and metamaterials with waveguide optics (discussed in Sections âDielectric waveguide-integrated meta-structuresâ, âOptical meta-fibersâ, and âPlasmonic meta-devices for controlling surface wavesâ).
-
On the other hand, we can also use inverse design15, which relies on computer optimizations, to develop free-formed analog (curvilinear boundaries)57,58,59,60 or digital metamaterial waveguides61,62,63,64,65,66,67,68,69,111 (elaborated in Section âInverse-designed metamaterial waveguidesâ).
Based on different waveguide platforms, metasurfaces and metamaterials can be synergized with dielectric waveguides and optical fibers to tailor optical modes, or with plasmonic waveguides to manipulate surface waves, as shown in Fig. 1b.
-
By saddling subwavelength architectures on top of dielectric waveguides, exquisite control over the electromagnetic fields is attainable to facilitate versatile couplers36,37,38,39,40,41,42,43,44, compact polarization- or wavelength- routers48,49,50, on-chip structured light generators35,45,46,47,77,78,79,80,81, integrated mode convertors51,82,83,84,85,86,87,88,89, sensors90,91,92,93 and nonlinear devices52,94,95 (discussed in Section âDielectric waveguide-integrated meta-structuresâ).
-
The introduction of meta-structures into optical fibers also greatly enriches traditional fiber devices, ushering the creation of tremendous novel meta-fiber applications in information modulations96,97,98, beam transformations99,100,101,102,103, imaging74 and numerous high-performance biochemical sensors and detectors75,76,104,105,106,107,108,109,110 (detailed in Section âOptical meta-fibersâ).
-
Meanwhile, meta-optics are hatching as excellent candidates to construct plasmonic meta-waveguides for controlling surface waves. Abundant research has been invigorated, including efficient multifunctional surface waves excita- tions70,112,113,114,115,116,117,118,119,120,121,122 and manipulations71,72,73,123,124,125,126,127,128 with largely miniaturized device footprint (detailed in Section âPlasmonic meta-devices for controlling surface wavesâ).
a If classified by design method, meta-waveguides can be conceived either by physics intuition-based forward design or computer optimizations-based inverse design. b If categorized by waveguide platforms, meta-optics can be saddled with dielectric waveguides, optical fibers and plasmonic waveguides. cât Brief zoology of meta-waveguides. A plethora of applications are prototyped by the playground of meta-waveguides, including, for instance, metasurface-patterned dielectric waveguides35,36,37,38,39,40,41,42,43,44,50,51,52,53,82, forward-designed metamaterial waveguides54,55,56,83,84,85,86,87,88,89, metasurface- or metamaterial-hybrid optical fibers74,75,76,96,97,98,99,100,101,102,103,104,105,106,107,108,109,110, meta-structures- assisted plasmonic waveguides70,71,72,73,112,113,114,115,116,117,118,119,120,121,122,123,124,125,126,127,128, inverse-designed metamaterial waveguides47,57,58,59,60,61,62,63,64,65,66,67,68,69 and etc.535,536. Panels adapted from: De Gruyter (c)100; Springer Nature (d96, e75, f74, j47, k51, l53, p535, q52, r70, s124); OSA (g44, m59, n58, o56); ACS (h)37; AAAS (i)50; AIP Publishing (t)127.
In the following, we start by briefly introducing the fundamentals and unique features of subwavelength meta-structured waveguides. General design process and device operation scenarios are concisely covered. Next, we comprehensively review latest researches derived from three different types of forward-designed meta-waveguides in separate sections, according to three distinctive underpinning waveguide platforms: dielectric waveguides, optical fibers and plasmonic waveguides (shown as Fig. 1b). Then we catalog inverse-designed metamaterial waveguides, focusing on waveguide-based design tutorials and algorithms, key applications, and comparisons of different design approaches for tailoring guided wave. Finally, we discuss current challenges and outline exciting opportunities of this vibrant field for integrated photonics and beyond.
Definitions, features and properties
Meta-waveguides here refer to a set of physical structures with engineered subwavelength features that guide electromagnetic waves. A simple case is the waveguiding media itself is man-made metamaterials129,130,131,132,133 consisting of intricate subwavelength building blocks. Leveraging the mathematical technique called transformation optics20, researchers can design waveguides with artificial refractive index distribution to realize exotic waveguiding phenomena such as theoretical arbitrary waveguide bend and light trapping129,130,131,132,133,134,135. However, in addition to the loss issues, these scenarios encounter experimental challenges in fabricating sophisticated bulk structures at high optical frequencies17,20, prohibiting its widespread implementation.
Another general case is applying meta-structures on waveguide surfaces to act as Mie resonators or Rayleigh scatterers21,22,23 to perform designer index perturbations35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,136. The structures can be metal or dielectric materials on top of as-fabricated waveguides after deposition and lift-off35,37,48,49,50,51,52. Alternatively, these subwavelength features (either fully38,39,47,54,55,56,63,64,65,66,67,68 or partially etched45,78,84,85,86,87,88,89) itself can be part of the waveguides defined by lithography. These devices are application-wise more appealing, for they are promising for mass-production by lithographic or imprinting-based nanopatterning12,137,138,139.
As shown in Fig. 2a, meta-waveguides as the penetration of meta-optics into waveguide optics51 can inherit the flexibility and versatility of light manipulation from its free-space counterparts of metasurfaces and metamaterials. The most significant distinction of meta-waveguides from their non-subwavelength equivalents like photonic crystal waveguides is waveguiding mechanism. As is illustrated in Fig. 2b12, structures of subwavelength dimension are crucial for meta-waveguides, because in this case the guided electromagnetic waves are experiencing an effective media with designed optical responses18,19. This mechanism is physically distinctive from photonic crystals (PhC) that rely on photonic bandgap140. Waveguiding in PhC is realized by introducing a line defect supporting guided modes against the photonic bandgap formed by the Bragg-like diffractions from periodic refractive index variations140. Taking subwavelength grating waveguides consisting of periodic silicon segments as an instance12,13,14, effective medium theory should be applied. FloquetâBloch modes are supported without propagation loss12 if the period Î is much smaller than light wavelength λ. As Î gets bigger, light starts to decay as photons are forbidden from propagating within the photonic bandgap. Then the structure will behave as a diffraction grating when the structure period steps into radiation regime12.
a Concepts of photonic crystals, metamaterials and metasurfaces. b Comparisons of light propagating in structured planar waveguides with different periodic feature size12. Left panel: schematic dispersion diagram. Right panel: Corresponding electric field distributions at three different regimes, where black rectangles denote silicon segments. (Reproduced from ref. 12) Waveguiding mechanisms and rough development timeline are appended157,537,538,539. c Two general directions to design meta-waveguides: physics intuition-based forward designs and inverse-design methods15. d General operation scenarios.
General design directions
Ramping up from scattered explorations by applying subwavelength structures141,142 and nanoparticles on waveguides143,144, meta-waveguides can now be systematically investigated by either forward or inverse-design methods.
In Fig. 2c we plot the two general design process. Except for some cases to elaborate later in next section83,84,85,86,87,88,89,90,91,129,130,131,132,133,134, most forward-designed meta-waveguides start from the analysis of single meta-atom unit41,42,43,44,48,49,50,51,52,70,71,72,73,74,75,76, which is the most fundamental element to perform field modulation35,145,146. By assembling designer meta-units into arrays, a functional meta-structure can be conceived145,146 and then integrated with different waveguides. However, this final step requires further attentions to properly engineer phase-matching and mode overlap issues35,44,51,52, the specific solutions of which will depend on application and the underlying waveguide platforms. Detailed design methods are elaborated in the following three sections.
As shown in the lower panel of Fig. 2c, inverse-design methods start from a different direction. The target device function is firstly specified in order to determine objective functions. Then computer optimizations are conducted to retrieve device structure under given constraints, such as gradient-based iterations with adjoint methods15,147 and deep learning algorithms148. Comprehensive design tutorials are detailed in later Section âInverse-designed metamaterial waveguidesâ.
Forward-designed meta-waveguides have explicit physical pictures and are relatively straightforward to design with excellent performance. In contrast, inverse-designed metamaterial waveguides are computationally heavy in the implicit optimization process but can realize some sophisticated functionalities that may be hardly assessable by forward design57,60.
General application scenarios
Considering all linear optical devices are mode converters149, meta-device functionalities can be ascribed to two general scenarios: linear mode conversion and nonlinear hybrid applications.
In conventional waveguides devoid of structural perturbations, conversion between two arbitrary electromagnetic modes is generally inaccessible due to wavevector mismatch83,149. However, in meta-waveguides, the meta-structures can provide an effective momentum keff to enable desired mode conversion51,82. The schematic is sketched as Fig. 2d, where Mode A and B can be free-space light beams, propagating waveguide modes, or surface waves. Lightwave propagating in a meta-waveguide undergoes consecutive and subwavelength-scale delicate field modulations (induced by resonance or form birefringence35,150,151,152) from the engineered structures, leading to an overall wavevector change of the electromagnetic modes51. Besides the collective scattering events from the structural perturbations, the mode conversion can be also interpreted as the contribution of multi-path interference from these subwavelength-dimensioned features153.
For nonlinear applications, phase-matching is pervasively required owning to energy and momentum conservations. Pronounced nonlinear phenomena usually demand rigorous phase-matched conditions. However, this requirement can be cir-cumvented by integrating meta-structures to waveguides of nonlinear materials to break mode conversion symmetry52,94,154,155. Considering the pumping optical mode as TE00(Ï1) as an example, the generated nonlinear signal TE00(Ï2) are then converted to other modes with same frequency Ï2 but different mode orders: TEmn(Ï2) and TEpq(Ï2), which will be preserved and accumulated with propagation52,154. Back coupling from the retained nonlinear modes to TE00(Ï2) is prohibited due to phase mismatch52 and minimal field overlap, as the effective wavevector keff provided by the meta-structures is unidirectional51,82. In addition, the nonlinear process can also be enhanced by meta-structures with optimized nonlinear overlap95.
Dielectric waveguide-integrated meta-structures
Enabled by the ever-increasing resolution offered by nanofabrication technologies, dielectric meta-waveguides open exciting venues towards versatile chip-integrated applications. This section mainly includes dielectric waveguides with subwavelength surface structures and forward-designed metamaterial waveguides, focusing physical model, design method and applications.
Tuning scattering properties of nanoantennas on a waveguide
Analogy to well-established microwave and radiofrequency antennas, optical antennas are essential building blocks for manipulating light radiation at subwavelength scale21,22,23,156. Before delving into the details of metasurface-patterned dielec- tric waveguides, we begin with easy interference model of plasmonic optical antennas40,48,49,50,94 and discuss their rational implementations on waveguides for directional coupling applications and so on.
Starting from the most fundamental model, the response of an optical antenna with dimension much smaller than light wavelength can be approximated by an electric dipole \({{{\mathbf{P}}}}_{{{\mathrm{a}}}} = {{{\mathbf{A}}}}\exp \left[ {{{{\mathrm{i}}}}\left( {{{{\mathbf{k}}}} \cdot {{{\mathbf{r}}}} + \alpha _a} \right)} \right]\) under external electromagnetic stimulus37,40,48,49, where A denotes radiation amplitude, \(\left| {{{\mathbf{k}}}} \right| = 2\pi {{{\mathrm{/}}}}\lambda\) is wavevector, λ stands for light wavelength and râ=â(x, y, z) is a spatial vector unit157. Acting as a resonator and scatterer, the optical antenna will have a characteristic phase αa depending on its shape, material, environment index, and light wavelength21,156. As is illustrated in Fig. 3a, by applying another antenna dipole \({{{\mathbf{P}}}}_{{{\mathrm{b}}}} = {{{\mathbf{B}}}}\exp \left[ {{{{\mathrm{i}}}}\left( {{{{\mathbf{k}}}} \cdot {{{\mathbf{r}}}} + \alpha _b} \right)} \right]\), directional emission can be achieved48 by properly controlling the antennas displacement and initial phase responses αa and αb. For instance, if we have destructive interference (αaâ+âαp)âââαbâ=âÏ in the right side (αp is the propagation phase determined by antenna displacement)40, directional emission to the left side is realized.
a Dipole interference model for directional emission and coupling40,48. b Wavelength-selective demultiplexer by integrating Fano nanoantennas on planar waveguides49. c On-chip directional coupler158. d Integrated polarization demultiplexer50. e On-chip spectroscopic sensor168. f Guided wave-driven metasurfaces for modulating free-space light35. g Integrated mode convertor by saddling gradient-metasurface on dielectric waveguides51. h Programmable metasurface for photonic neural network and experimental results for image recognition177. i, j Waveguide mode convertor based on shallow84 or fully etched87 metasurface perturbations. k Simultaneous multimode convertor89. l Efficient coupler38. m Metasurface-assisted second harmonic generation in lithium niobate (LN) waveguide52. n Nonlinear signal generation and manipulation in LN waveguide patterned with grating metasurface155. o Polarization and wavelength sorting42 for circular polarizations using Geometric phase metasurface. p Jones matrix model43. q Versatile coupler for arbitrary polarizations44. r OAM generator using subwavelength holographic surface gratings45. s Multi-color waveguide holography80. Panels adapted from: Springer Nature40,52,177; ACS49,84,158,168; AAAS45,50,51; Wiley38,42,87,88; OSA43,44,80,155.
Leveraging this intuitive mechanism, antenna combos can be designed on top of dielectric waveguides to realize directional coupling40,94. Alternatively, some antenna elements can also appear as aperture, which can be investigated similarly using Babinetâs principle48. For example in Fig. 3b, the combination of a gold nanodisk and air nanoslit forms a Fano antenna49, which is featured by the asymmetric Fano line-shape originating from the overlap of a broad and narrow resonance from the nanodisk and nanoslit respectively. By saddling this Fano antenna (with opposite bidirectional scattering attributes on two different wavelengths) on rectangular48 or planar waveguides49, wavelength-selective demultiplexers are realized. In addition to the coherent interference from double-element antennas, directional emission can also take place in a single antenna, when the radiation from different internal plasmonic modes interferes destructively in the other side (Fig. 3c) for directional couplers158.
A more general antenna array configuration for high directivity is YagiâUda antennas, which are inspired by its radiofrequency counterparts consisting of metal rods acting as feed, reflector and directors156,159,160. Endeavors are pursuit for implementing YagiâUda antennas to waveguides37,40,50,160,161,162. Waveguide-hybridized gold YagiâUda antennas can not only directionally in-couple free-space light source to guided waves, but also out-couple waveguide modes to free space and localized plasmons37, with further applications in on-chip data communications, directional lasers, and metrology160,161,162,163.
Moreover, the scattering attributes of the antenna elements are also polarization-controllable. For instance, the two gold nanorods horizontally resting on a silicon waveguide along the x axis (left panel of Fig. 3d)50 directionally couple linear x-polarization Ex to right-propagating TM mode. However, this array barely interacts with y-polarized light Ey, as the electrical current in the slender nanorod antenna cannot be efficiently excited when the incident electric field vector is perpendicular to its orientation21. In contrast, the structure shown in the middle panel of Fig. 3d can couple incident Ey into left propagating TE mode with high directionality. By combining the two antenna arrays with opposite coupling direction and distinctive response to incident polarizations, chip-integrated polarization demultiplexers for high-speed optical communications are realized50.
Plasmonic chains are also incorporated to various dielectric waveguides to explore photon-plasmon interactions, coherent perfect absorptions164, coupling165, slow light phenomena166, all-optical switches167 and lab-on-a-chip applications168,169,170, by engineering the interplay between the localized surface plasmon modes and propagating waveguide modes144,165,166,171,172. Furthermore, this waveguide-hybrid platform is particularly promising for largely miniaturized spectroscopic and sensing applications168,169,170. Taking the device in Fig. 3e as an instance168, a subtle change in surrounding index can be captured by the highly enhanced field in the narrow gap between the gold antennas, resulting in a shift in plasmonic resonance harvested by the waveguide. Compared with conventional bulky free-space optical setups, plasmon resonance can be conveniently measured in this antennas-loaded dielectric waveguides for surface-enhanced infrared absorption spectroscopy, with high coupling efficiency over 70% and compact footprint168 around 2âµm2.
Phase-gradient nanoantennas array on waveguide
Besides elementary interference model, next we discuss how to apply metasurface toolbox to design dielectric meta-waveguides for more sophisticated device functions with larger antenna arrays.
Guided modes to free-space light applications
Metasurface-decorated dielectric waveguides can efficiently out-couple waveguide signals to complex free-space light fields79,173. A guided wave-driven metasurface is schematically shown as the upper panel of Fig. 3f. The total phase shift of the extracted wave from waveguide-fed metasurfaces consists of two parts: (i) the abrupt and spatial-varying phase shift ÎÏ(x) provided by each meta-unit21 at coordinate x, and (ii) phase βx accumulated from the propagation of guided waves, where β is the propagation constant35. Therefore, phase profile of the extracted wave along x direction can be formulated as below.
By judiciously designing the meta-units to tailor ÎÏ(x), diverse applications can be realized, such as LiDAR32,174, optical communications and display79,80,81. For instance, using the metal-dielectric-metal sandwiched antennas (for approximate 2Ï phase shift range) to from a phase-gradient metasurface atop of silicon waveguide, off-chip beam deflection and focusing can be achieved35. By arranging this metasurfaces on an active InGaAsP/InP microring waveguide to break the degeneracy of clockwise- and counterclockwise-propagating whispering gallery modes (as lower panels in Fig. 3f), a photonic integrated orbital angular momentum (OAM) laser is experimentally demonstrated35. In addition to waveguide top surfaces, subwavelength antennas or gratings-like structures can be implemented on waveguide sidewalls as well for structured light and OAM generations46,175,176.
Guided-mode conversions
As already discussed in the âGeneral application scenariosâ section, the meta-structures resting on waveguide can bridge the wavevector mismatch between different modes to enable integrated mode convertors51. As is illustrated in Fig. 3g, when guided wave propagates against the unidirectional phase gradient \({{{\mathbf{k}}}}_{{{{\mathrm{eff}}}}} = {{{\mathrm{d}}}}\Phi {{{\mathrm{/d}}}}x\) offered by the collective scattering effect from gradient metasurface, the total internal reflection angle decreases, which corresponds to conversion from low-order to high-order waveguide modes. In contrast, when light propagates along keff, its wavevector \(k_{{{{\mathrm{mode}}}}} = n_{{{{\mathrm{eff}}}}} \cdot 2\pi {{{\mathrm{/}}}}\lambda\) picks up keff, leading to coupling from high-order to low-order modes51 (neff denotes effective mode index and λ is vacuum light wavelength).
If fundamental modes propagating along keff are injected, it will be coupled into surface waves and get absorbed by the plasmonic metasurfaces. However, light wave with opposite propagating direction can get passed with much lower loss while converting to high-order modes. This asymmetric power transfer facilitates broadband reciprocal optical diodes82. Optical neural networks can be also explored utilizing tunable gradient metasurface-based waveguide mode convertors. As shown in Fig. 3h, using Ge2Sb2Te5 (GST) phase-change materials as programmable metasurface waveguide mode convertor, the conversion of two waveguide spatial modes (TE0 and TE1 modes) can be precisely controlled with 64 distinguishable levels to encode the weight parameters in matrix-vector multiplication computation177. A prototypical optical convolutional neural network with 2âÃâ2 array of the GST convertors is experimentally demonstrated to perform image processing and recognition between handwriting digits â1â and â2â. The experimental recognition results are shown in the right panel of Fig. 3h177. Besides, invisibility cloaks and chip-integrated spectrometers can be also envisaged in similar platform67,93.
Aperture antennas:
The waveguide-integrated plasmonic metasurfaces discussed above inherit Ohmic loss from metals150. Next, we discuss meta-waveguides with dielectric subwavelength architectures, which have lower optical loss and better CMOS-compatibility12,18. Specifically, the antennas can appear as air apertures defined on waveguides. Either fully- or partially etched aperture antennas can be designed on dielectric waveguides to facilitate mode conversion83,84,85,86,87,88,89 and efficient coupling applications38,39 using effective medium or coupled mode theory83.
An exemplary device structure is shown in the upper panel of Fig. 3i, where subwavelength features are partially etched atop of a rectangular silicon waveguide84 to create periodic index variations Îε(x, y, z) along the propagation direction and a graded index profile along the transverse direction. The periodic subwavelength structures along the propagation direction provide an additional momentum keff to enable phase-matched coupling to the desired output mode83, while the aperiodic transverse graded index profile enhances coupling strength by optimizing spatial modal overlap83. The lower panel of Fig. 3i illustrates the desired refractive index profile offered by the meta-waveguide for converting input TE00 mode to TE10 mode with high mode purity around 95% and high transmission of 88%84.
Besides shallowly etched structures83,84,85,88,89, dielectric waveguides with fully etched subwavelength apertures86,87,178 can also enable efficient mode conversions with simplified fabrication process. Figure 3j shows the SEM image of a fully etched meta-waveguide capable of converting TE00 mode to TE10 mode within an ultrashort length about 2.42âµm around λâ=â1.55âµm87. Integrated multifunctional mode convertors can be also conceived by applying complex surface meta-structures that are also aperiodic in waveguide longitudinal direction89,178,179. For instance, the multimode convertor shown in Fig. 3k for simultaneously converting 3 different modes with low insertion loss and acceptable crosstalk89. Furthermore, polarization convertors85 and high-efficiency optical couplers (Fig. 3l)38,39 can be also designed using spatially penetrated waveguides.
Nonlinear mode conversions
Metasurfaces can also interface nonlinear mode conversions180,181 when incorporating on nonlinear waveguides, as already discussed in Section âGeneral application scenariosâ. Figure 3m shows the integrated lithium niobate (LN) waveguide patterned with dielectric gradient metasurface for phase-matching-free second harmonic (SH) generations52. As is shown in Fig. 3m, the generated SH signals TE00(2Ï) from the pump TE00(Ï) is coupled to high-order SH modes TEmn(2Ï) and TMmn(2Ï). They are then preserved and strengthened during propagation, as the inverse conversion from high-order SH modes to TE00(2Ï) is prohibited due to phase mismatch52,154.
Simultaneous SH generation and radiation are also reported using grating metasurface-patterned LN slab waveguides155. By encoding the desired phase and amplitude information to the grating metasurfaces under phase-matching condition (Fig. 3n), the wavefront of the generated SH signals can be efficiently controlled for nonlinear beam-shaping functions like dual focusing and Airy beam generation155. Other nonlinear meta-waveguides94,95,182 also judiciously optimize nonlinear spatial overlap to significantly enhance nonlinear coupling efficiency95,183.
Jones matrix model for waveguide-integrated metasurfaces
Next, we discuss geometric metasurface-patterned dielectric waveguides and then introduce a more general Jones matrix model for waveguides-integrated metasurfaces.
Geometric phase metasurface-on-waveguide
Geometric metasurface or PancharatnamâBerry phase (PB) metasurface152,184 utilizes optical antennas with identical geometry but spatially varying rotation angle θ to tailor wavefront of circular polarizations. Meta-units with angular rotation distribution θ(x, y) can locally encode a dispersionless phase profile Ïâ(x, y) to one certain circular polarization |Ï âã and flip its handedness.
The PB phase shift Ïâ can be traced from the paths of polarization change on the Poincaré sphere (polarization state space)185. A PB phase metasurface acting like a half-wave plate will convert incident left-handed circular polarizations (LCP) \(\left| {{\it{\upsigma }}^ - } \right\rangle\) to right-handed circular polarization (RCP) \(\left| {\sigma ^ + } \right\rangle\) with designer phase modulations152: \(\left| {\sigma ^ - } \right\rangle \to {{{\mathrm{e}}}}^{{{{\mathrm{i}}}}2\theta \left( {x,y} \right)}\left| {\sigma ^ + } \right\rangle\). In the meantime, the same structure will impart a conjugate phase profile Ï+(x, y)â=ââ2θ(x, y) to the orthogonal circular polarization \(\left| {\sigma ^ + } \right\rangle\) with polarization conversion: \(\left| {\sigma ^ + } \right\rangle \to {{{\mathrm{e}}}}^{ - {{{\mathrm{i}}}}2\theta \left( {x,y} \right)}\left| {\sigma ^ - } \right\rangle\). This attribute has been exploited to develop free-space applications such as dual-polarity metalens and holograms186.
To transfer geometric metasurface to integrated optics, gold and silicon antennas are patterned on silicon waveguides to realize integrated polarization sorters41. The gradually increased antenna rotation angle (with 30° step) creates opposite phase gradient between LCP and RCP light, leading to directional coupling of orthogonal circular polarizations to opposite directions41. Figure 3o shows the spin- and wavelength-selective demultiplexers42, with simulated coupling efficiency above 50% using silicon antennas-patterned silicon nitride waveguide.
Free-space Jones matrix model for metasurface
Despite the simple relationship between imparted phase Ï and antenna rotation angle θ for convenient design, meta-waveguides discussed above inherit limitations from geometric metasurface. First, the design methods are only applicable for circular polarizations. Second, the optical fields that coupled into the waveguide are hybrid modes41,42, which impedes high-speed optical communications applications due to inter-mode dispersion. Another important category of metasurface exploring propagation phase, where antenna orientations θ are fixed but the width lx and height ly of each antenna cell are individually engineered to tailor the eigen-phases Ïx and Ïy encoded to two orthogonal linear polarizations152: \(\left| {{{\boldsymbol{x}}}} \right\rangle \to {{{\mathrm{e}}}}^{{{{\mathrm{i}}}}\varphi _x}\left| {{{\boldsymbol{x}}}} \right\rangle\) and \(\left| {{{\boldsymbol{y}}}} \right\rangle \to {{{\mathrm{e}}}}^{{{{\mathrm{i}}}}\varphi _y}\left| {{{\boldsymbol{y}}}} \right\rangle\). Propagation phase stems from form birefringence43,151, as the dielectric antennas acting as truncated small waveguides have different effective mode indices under different incident polarizations. This leads to different accumulated phase retardations when light passing through the antennas with different geometry.
Jones matrix metasurface model combines both geometric phase and propagation phase151,152. A periodic metasurface resembling a birefringent waveplate can be described by a Jones matrix J (connecting two input and output polarization vectors as \({{{\mathbf{J}}}}\left| \lambda \right\rangle = \left| \kappa \right\rangle\) with two operation scenarios, as illustrated in Fig. 3p:
-
(i)
Impart two independent and arbitrary phase profiles Ï+(m, n) and Ïâ(m, n) to an arbitrary pair of orthogonal elliptical
polarizations \(\left| {\lambda ^ + } \right\rangle\) and \(\left| {\lambda ^ - } \right\rangle\) respectively151,152, where (m, n) denotes different antenna pixels43. The unitary and symmetric matrix nature of J guarantees the following two mappings simultaneously152,
$${{{\mathbf{J}}}}\left( {m,n} \right)\left| {{{{\mathbf{\lambda }}}}^ {+} \rangle = {{{\mathrm{e}}}}^{{{{\mathrm{i}}}}\varphi ^ + \left( {m,n} \right)}} \right|\left( {{{{\mathbf{\lambda }}}}^ + } \right)^ \ast \rangle \,{{{\text{ and }}}}\,{{{\mathbf{J}}}}\left( {m,n} \right)\left| {{{{\mathbf{\lambda }}}}^{-} \rangle= {{{\mathrm{e}}}}^{{{{\mathrm{i}}}}\varphi ^ - \left( {m,n} \right)}} \right|\left( {{{{\mathbf{\lambda }}}}^ - } \right)^ \ast \rangle$$(3)where superscript * represents complex conjugate. Here, the two independent phase profiles Ï+(m, n) and Ïâ(m, n) can be arbitrarily assigned, but the output polarizations \(\left| {\kappa ^ + } \right\rangle\) and \(\left| {\kappa ^ - } \right\rangle\) are fixed (as left panels of Fig. 3p): \(\left| {\kappa ^ + } \right\rangle = \left| {\left( {\lambda ^ + } \right)^ \ast } \right\rangle\) and \(\left| {{{{\mathbf{\kappa }}}}^ - } \right\rangle = \left| {\left( {{{{\mathbf{\lambda }}}}^ - } \right)^ \ast } \right\rangle\), denoting preserved polarization ellipse but flipped handedness. The desired Jones matrix J(m, n) can thus be solved to determine antenna structure151.
-
(ii)
Complete control over both the phase Ï+(m, n) and output polarization \(\left| {\kappa ^ + } \right\rangle\) of one certain incident polarization \(\left| {\lambda ^ + } \right\rangle\), while the encoded phase Ïâ(m, n) for its orthogonal polarization \(\left| {\lambda ^ - } \right\rangle\) is not configurable151 (right panels of Fig. 3p).
Implementation on waveguide
Integrating the Jones matrix metasurface model on dielectric waveguides can propel integrated optics into new heights by offering a more general design method for versatile multiplexers for arbitrary polarizations and complete mode control over coupled lights. By assigning opposite phase gradients to two orthogonal incident polarizations \(\left| {\lambda ^ + } \right\rangle\) and \(\left| {\lambda ^ - } \right\rangle\) under operation scenario (i), integrated polarization demultiplexers can be devised with high directivity over 20âdB for arbitrary incident elliptical polarizations44 (lower panel of Fig. 3p). Furthermore, by optimizing antenna geometries at multiple wavelengths43,44, dispersion-managed wavelength demultiplexers or ultrabroadband directional couplers can be also conceived.
Notably, when transferring dielectric meta-units designed by Jones matrix method151,152 to waveguides, spatial modal overlap between antenna scattering nearfield and target waveguide mode for excitation requires further attention51. For instance, to selectively excite TEm,n mode, mâ+â1 rows of antennas are required44,187. The mode index n is then controlled by properly engineered phase-gradient ÎÏ/d of the metasurface by combining generalized Snellâs law with phase-matching condition21,
where ÎÏ and d are the phase difference and distance between adjacent antennas respectively, neff represents the effective index of the target waveguide mode to excite, k0 is wavevector. As depicted in Fig. 3q, specific high-order mode of interest can be exclusively launched by the mode-configurable coupler with high purity187 over 90% under operation scenario (ii). On-chip OAM generators with configurable topological charge is also proposed using mode mixing method44,187.
Holographic gratings and hybrid subwavelength surface structures
For chip-scale structured light generations, subwavelength holographic gratings are applied on top of silicon waveguides45,77,78,188,189 to generate surface-emitting vortex beams carrying OAM with specific topological charge77 \(\ell\). To design such device, the holographic grating can be retrieved by interfering the target OAM mode \({{{\mathbf{E}}}}_{{{{\mathrm{OAM}}}}} = {{{\mathbf{A}}}} \cdot \exp \left( {{{{\mathrm{i}}}}\ell \theta } \right)\) and approximated in-plane waveguide field \({{{\mathbf{E}}}}_{{{{\mathrm{waveguide}}}}} = {{{\mathbf{B}}}} \cdot \exp \left( {{{{\mathrm{i}}}}k_{{{{\mathrm{mode}}}}} \cdot x} \right)\) as45
where A and B are amplitudes, θ is azimuthal angle and kmode denotes the propagation constant of the waveguide mode propagating along x direction. Figure 3r shows the proposed broadband OAM generator using two superposed subwavelength holographic forks atop of a silicon waveguide with a compact footprint45 of 3.6âÃâ3.6âµm2, where Gfork is converted to binary phase hologram considering current fabrication conditions. Similar subwavelength holographic surface architectures are leveraged to realize waveguide-integrated holography as well (Fig. 3s)80,81.
Besides, inspired from the integrated trench metalens and one-dimensional transmit-array190, on-chip wavefront shaping and mathematical optical signal transformations are demonstrated using standard silicon-on-insulator (SOI) platform with subwavelength metalens apertures53,191,192. Metamaterials are also saddled on waveguides for various integrated photonics applications such as optical modulation, coupling and sensing193,194.
Subwavelength grating waveguides
The meta-waveguides discussed in previous subsections are featured by subwavelength patterns on waveguide top surfaces, as summarized by Fig. 3. In the following two subsections, we focus forward-designed metamaterial waveguides (see Fig. 4), which are devised mainly by effective medium theory or transformation optics16,17,18,19.
a Schematics of a subwavelength grating waveguide12. b Nanophotonic phase shifter56. c Polarization mode convertor196. d Broadband polarization beam splitter198. e SWG ring resonator biosensor90. f Integrated fiber-to-chip coupling interfaces. Inset: details of the SWG waveguide coupler203. g Ultrabroadband chip-integrated all-silicon polarizer205. h, i Silicon metamaterial waveguides for exceptional coupling55 and evanescent wave suppression54. j Left-handed metamaterial waveguiding heterostructures to slow light131. k Schematic of waveguide bend transformation135. l Integrated zero-index waveguide216. m Terahertz band-stop filer using a metamaterial slab waveguide219. n Metamaterial waveguide for qubits. Insets: SEM images for the capacitive qubit coupler (lower panel) and coupled microwave resonators respectively (upper panel)225. Panels adapted from: Springer Nature (a12, i54, j131, k135, n225); OSA (b56, e90, g205, h55, m219); IEEE (c196, f203); Wiley (d)198; ACS (l)216.
Among them, subwavelength grating (SWG) waveguides exhibit promising potentiality to revolutionize conventional photonic integrated circuits12. Given that this topic is already reviewed in previous literatures12,13,14, here SWG waveguides as a specific member of dielectric meta-waveguides family are only very briefly mentioned to keep this review intact.
A typical structure for SWG waveguide is illustrated as Fig. 4a, where periodic silicon segments with subwavelength spacing Î forms the waveguide core12. When is Î much smaller than the half-wavelength of the guided light, localized Floquet- Bloch modes are supported without scattering loss in propagation14. Distinctive from Bragg and conventional diffraction gratings, the SWG structure instead behaving as a homogeneous uniaxial crystal195 controlled by grating structures and duty cycle. âBridgeâ elements are commonly applied for the low-loss transition between SWG and homogeneous waveguide parts.
Compact and broadband passive phase shifters56 and mode convertors196,197 are demonstrated as Fig. 4b, c respectively, via engineering the dispersion and anisotropy of the SWG metamaterial waveguides. Polarization beam split- ters198,199,200,201, polarizers202, SWG microring-based biosensors90,91 and high-efficiency fiber-to-chip optical couplers203,204 are also explored, with typical device structures shown in Fig. 4dâf.
Other forward-designed metamaterial waveguides
Integrated photonics applications
Figure 4g shows the SEM image of an on-chip silicon polarizer with broad bandwidth exceeding 415ânm and high polarization extinction ratio over 20 dB at telecommunication band205, using a 180°-bend silicon waveguide coupled with SWG metamaterial claddings. Moreover, SWG âcladdingsâ can be exploited to realize exception coupling and suppress evanescent wave as well (see Fig. 4h, i)54,55, for higher integration density and crosstalk mitigation. Optical beams focusing and transformations for guided waves signals are also reported206,207.
Exotic optical physics
Metamaterial waveguides are ideal platforms for exploring exotic physical phenomena to theoretically enable light slowing and trapping131, such as the axially varying waveguiding heterostructure with a metamaterial core in negative refractive index (Fig. 4j). Although the pace of photons may not be stopped in realistic metamaterial waveguides with appreciable bandwidth132, abundant optical physics for light-matter interactions can still be explored, with potential applications in chip-integrated optical signal processing and communications133,208.
Leveraging transformation optics (TO)19,209, integrated metamaterial waveguides can be conceived129,135,210,211,212,213. Figure 4k illustrates the schematic for designing a low-crosstalk multimode waveguide bend with feasible fabrication constraints using TO135, where darker color indicates higher index. Compared with conventional bending waveguides, significant inter-mode coupling mitigation (over 14âdB) in this TO waveguide is experimentally verified135. Waveguide tapers, connectors and beam expanders are also designed under TO theory129,210,211.
Moreover, metamaterial waveguides with exotic refractive indices are also an active field of research214. For instance, theoretical perfect waveguide bending can be realized in zero-index metamaterials134,215. Figure 4l illustrates the on-chip metamaterial waveguide based on standard SOI platform with a refractive index approaching zero216, where phase-matching free light propagation is directly observed. Other exotic optical phenomena are also explored at optical and lower frequencies, such as strong field enhancements in epsilon-near-zero materials217,218, magnified light absorption (Fig. 4m)219,220, enhanced spin Hall effect and broadband mode conversions130,221,222,223, to name a few.
Quantum applications
Recently, quantum supremacy is demonstrated using programmable superconducting processors for qubits224, where the computation time can be dramatically accelerated from over millenniums to minutes compared with classical processors under certain calculation scenarios. In the meantime, computational advantages using quantum photonics are also reported6. In contrast to conventional structures, metamaterial waveguides can enable new degrees of freedom in controlling qubits225,226,227. Figure 4n shows a superconducting metamaterial waveguides to tailor the transition lifetimes of qubits225, where metastable qubit states with ultralong lifetime (about 24-fold enhancement) and short-lived states are observed and selectively tuned.
Optical meta-fibers
Optical fibers are another well-established platform to guide propagating electromagnetic modes. Integrating meta-structures with fibers gives rise to optical meta-fibers as an important member of meta-waveguide family. Distinctive from dielectric nanophotonic waveguides for various on-chip applications, optical fibers are widely used for massive long-haul optical communications and versatile interconnects that interface chips to exterior systems2,3. Moreover, their flexibility, biocompatibility, and mechanical robustness have made optical fibers with small cross-section and extreme aspect ratio as excellent candidates for remote, in situ and in vivo applications228,229 beyond photonic integrated circuits, such as biochemical sensors and endoscopic optical imaging230.
However, conventional optical fibers are limited by silica material properties (in terms of transparency window, cut-off frequency and nonlinearity) and the cylindrical waveguide geometry pervasive in fiber drawling process229. Compared with microfibers devoid of subwavelength features230, optical fibers employing subwavelength meta-structures allow for much powerful control over light attributes, including phase, polarization, amplitude, dispersion, and optical impedance229. A novel technological roadmap (lab-on-fiber) was thus launched to develop a novel class of all fiber devices and components, by judiciously integrating functional structures and materials onto optical fiber substrates at the micro- and nano-scale105,231,232,233. This vison is expected to provide the foundational basis to enlarge the functionalities pertaining to optical fiber technology towards âplug-and-playâ platforms to be exploited in many strategic applications, ranging from optical processing and computing to environmental monitoring, life science, safety and security75,234.
In general, meta-structures can be designed on the flat tip of optical fibers74,75,76,96,97,98,99,100,101,102,232,235 to enable âmeta-tipsâ, where the fiber facet acts as a unique light-coupled microscopic substrate. Alternatively, subwavelength architectures can be also devised along the fibers for exotic waveguiding or to interact with evanescent optical fields to enable metamaterial fibers236,237,238,239,240,241,242,243,244,245,246,247.
In this section we discuss optical fiber âmeta-tipsâ (fiber facet-integrated meta-structures) and âmeta-fibersâ (intra-fiber subwavelength features), showcasing representative applications and corresponding fiber fabrication technologies.
Optical fiber meta-tips
As highlighted in past review papers22,229, the judicious integration of metasurfaces to optical fibers could be a game-changing direction for next-generation fiber-optic devices and components to disruptively expand their conventional functionalities. As is illustrated in Fig. 5a, metasurfaces would, indeed, open unprecedented paths to manipulate light using optical fibers to significantly accelerate relevant developments such as active beam profilers, spatial light modulators and fiber-optic tweezers, just to name a few231. Moreover, translating flat optics onto unconventional substrates, as the case of optical fibers, would allow the creation of lab-on-fiber assisted platforms with extraordinary capabilities in biomedical imaging, scanning near-field optical microscopy, and single-molecule detection103,106,107,108,109,110,248,249,250,251,252,253.
a Combining the advantages of optical fibers and the functionality of metasurfaces for novel devices. Insets adapted from: Elsevier (Bio-sensing255); AIP publishing (Beam shaping256). b Schematics and SEM images of an optical fiber meta-tip for beam steering75. c Upper panels: Metasurface-enhanced lab-on-fiber bio sensors. Lower panels: Gradient-free benchmark76. d SEM images of the fiber facet-integrated metamaterial dispersive gratings107. e Multiparameter nanoprobe using a plasmonic crystal cavity on fiber end-face254. f Metalens on photonic crystal (PhC) fiber facet: schematics and SEM images of the meta-structures100. g Photograph of the nano-optic endoscope using metalens74. Inset: In vivo endoscopic imaging. h Fiber-optic meta-device for all-optical signal modulation96. i SEM image of meta-facet fiber to generate OAM+1 with measured tilt interferogram257. j SEM image of a tiny microhouse assembled on a fiber tip260. Figures adapted from: Springer Nature (b75, e254, g74, h96); Wiley (c)76; AIP (d107, i257, j260); De Gruyter (f)100.
Following this intriguing suggestion, one of the important milestones as âoptical fiber meta-tipâ was first demonstrated by Principe et al.75, with extraordinary light manipulation capability. The proof-of-concept was realized via focused-ion-beam (FIB) milling of rectangular nanoantennas arrays on the gold-coated termination of a single-mode optical fiber. The metasurface was designed to display a linear-phase profile to split an impinging light beam into an ordinary polarized component, and an anomalous extraordinary component (with different polarization state) for beam steering, as shown in Fig. 5b. By judiciously designing phase-gradient metasurface on fiber tips, the same group later reported the efficient excitation of plasmonic surface waves with unprecedented localization levels for developing all fiber optrodes with unparalleled sensing capability for life science applications (Fig. 5c)76. A phase-gradient plasmonic metasurface-based device was demonstrated to detect biomolecular interactions, with a sensitivity more than two orders of magnitude higher than that of a gradient-free counterpart.
The alluring potential of integrating meta-structures on optical fibers are soon recognized by researchers, followed by massive emerging optical fiber meta-components and meta-devices for various applications. As shown in Fig. 5d, a high- quality metamaterial dispersive gratings is integrated on fiber facet with the quality factor exceeding 300 to efficiently tailor light dispersion107. Lab-on-fiber nanoprobes using in plane integrated distributed Bragg reflectors on the end-face of a single-mode optical fiber is also reported, enabling the excitation of two spatially separated high-Q resonance modes (Fig. 5e)254. Figure 5f shows the first focusing optical meta-tip made by directly patterning a gold meta-lens on the facet of a photonic crystal fiber100. Superfocusing is achieved at 1550ânm wavelength with maximum enhanced optical intensities reaching 234%.
This concept could also have an enormous impact on next-generation fiber-optic imaging systems, especially in life science applications231, with exceptional spatial resolutions and miniaturization levels255. The reliable integration of metalenses could considerably overcome traditional difficulties associated with optical aberrations, alleviating also the well-known trade-off between the transverse spatial resolution and depth of focus, which significantly limits the scope of optical imaging in precision medicine. Optical fiber meta-tips coupled with optical coherence tomography (OCT) tools may provide the key asset for advanced nano-endoscopes, for in vivo imaging with spatial resolutions that are hardly possible with conventional platforms. Figure 5g shows a novel matalens-assisted endoscopic OCT platform that can be easily integrated in needles and catheters to achieve near-diffraction-limited imaging through negating non-chromatic aberrations74. The proposed tool was validated in case of endoscopic imaging of human lung specimens and sheep airways (shown in Fig. 5g inset), demonstrating superiority as compared to commercial OCT endoscopes featuring to improve and enlarge the clinical utility of OCT platforms.
The extraordinary capability of metasurfaces to control light at nanoscale would also open potential disruptive developments in optical signal processing applications. As illustrated in Fig. 5h, coherently controlled absorption in a fully fiberized and packaged switching meta-device was recently reported96. An optical fiber meta-tip platform was conceived demonstrating logical functions (XOR, NOT and AND) at wavelengths between 1530 and 1565ânm. The proposed metadevice has been successfully tested at up to 40 gigabits per second, opening new opportunities for 100âTHz bandwidth single-photon operation with potential impact in quantum information networks97,98. Meanwhile, fiber facet-integrated meta-structures are also exploited for structured light generations and beam shaping256,257,258,259. Figure 5i sketches the SEM images of the meta-facet fiber for generating OAM beam with topological charge \(\ell = + 1\)257.
These valuable examples highlight future potentials of lab-on-fiber technology, optical communications, and related optical fiber meta-tips to drive a new technological revolution in optical fiber technology, for many realistic applications with unrivaled advantages in terms of functionalities, miniaturization, power consumption and overall performances. Next development in this domain may also take advantage from the advances in integrating functional materials onto optical fibers with a full spatial control at nanoscale. It is now possible to conceive and create any arbitrary 2D and 3D micro and nanostructure on the facet of optical fibers, as demonstrated by the smallest micro-house never realized on the optical fiber termination using robotics nano-factory and origami techniques260 (see Fig. 5j).
Metamaterial fibers
Innovations can be also made beyond fiber facets. Compared with optical meta-tips, metamaterial fibers provide a broader stage to deploy meta-structures to tailor the propagation and dispersion of fiber modes, yet they also demand more stringent quality control over the desired subwavelength structures along the entire fiber229. For meta-fibers with complex sidewall structures, Fig. 6a shows the SEM image of a microfiber Bragg gratings fabricated by FIB milling working around 1.55âµm communication wavelengths, with 576ânm pitch and 100ânm-depth grooves236. This fiber device with subwavelength features exhibit high transmission dip around 15 dB236 and high sensitivity for refractive index and temperature237,261,262,263. Simple nanostructures like a single gold sphere can be also applied to airlclad nanofibers to explore spin-orbit interaction of light and controlled directional coupling238 (Fig. 6b). Intra-fiber metasurfaces are proposed for mode conversion239. Other sophisticated fiber sidewall textures may be envisaged by adapting emerging fiber fabrication technologies to optical fibers264,265,266.
a Fiber gratings with subwavelength feature size236. b Air-clad silica nanofiber with a gold nanoparticle resting on its surface238. c SEM image of the metamaterial fiber with aluminum core and radially oriented nanopores274. d Cross-section schematic of a rolled-up Al2O3/Ag bilayers hollow fiber240. e Microscope image of the fiber facet with subwavelength indium wires uniformly embedded in Zeonex host around the hollow-core243. f Hollow-core ENZ fiber embedded with ITO nano-shell245. g Metamaterial fiber for subwavelength-resolved THz focusing and imaging246. Panels adapted from: OSA (a236, c274, e243); AAAS (b)238; ACS (d)240; Springer Nature (f245, g246).
Subwavelength structures that are uniform along fiber length direction can be manufactured by preform-based fiber drawing methods (detailed in next subsection)267,268,269. Metamaterial fibers244,268,269,270,271 with hollow240,241,242,243,272,273, metallic274,275, holey276 and multiple cores246,247,276,277 are reported. Figure 6c shows the cross-section of an anisotropic metamaterial fiber with radially distributed internal nanopores around the aluminum core supporting exotic modes274 to strongly modify the waveguiding fiber attributes. For instance, hollow-core fibers with hyperbolic metamaterial claddings can guide light beyond cut-off frequency for enhanced light coupling278 and low latency communications. Metamaterial cladding with various material combinations enables powerful dispersion control from ultraviolet240, infrared241,242 to terahertz (THz)243,278 and microwave frequencies279 to circumvent the structure and material property limits of conventional silica optical fibers280. The meta-fiber shown in Fig. 6d exploits surface plasmon and classical fiber waveguiding240. Figure 6e sketches a single-mode, single-polarization hollow-core fiber with metal-dielectric hybrid metamaterial cladding for high-density integration of THz systems243.
Epsilon-near-zero (ENZ) materials such as indium tin oxide (ITO)-embedded hollow step index fiber is also proposed as Fig. 6f245, with strong field enhancement in the subwavelength ITO shell and potential applications in sensing, nonlinear optics and enhanced quantum emissions281. Figure 6g depicts the cross-section of a THz metamaterial fiber with hexagonally arranged subwavelength indium wires for sub-diffraction imaging246 produced by fiber drawing of the preform. This metamaterial fiber inspired by hyperlenses with indefinite permittivity tensor can collect high spatial frequencies over optically long distances to enhance imaging resolution from THz277 to infrared frequencies282.
Fabrication technologies
The waveguiding flexibility, high aspect ratio and microscopic cross-section of optical meta-fibers provide unique advantages, but simultaneously challenge conventional nanofabrication technologies developed for large planner substrates228. Nevertheless, the maturity of diverse fiber fabrication techniques has made optical fiber meta-tips and metamaterial fibers one step closer from lab demonstrations to potential market products. Figure 7a summarizes currently available approaches to fabricate meta-structured optical fibers76,97,104,228,229,283,284,285,286,287,288,289,290,291,292. For optical meta-tips, ordinary photo- and electron beam lithography generally confront challenges in sample mounting and uniform resist coating for the small fiber facet229,287. Instead, nanotransfer103,110,229,288,289 and FIB milling75,76,96 can be applied to define exquisite subwavelength meta-patterns at fiber facets. Laser writing290,293 and nanoimprinting283,284,291,294 generally have comparatively lower resolution but higher yield. For metamaterial fibers, preform-based fiber drawing methods are most promising for mass-production. Other approaches such as FIB milling and nanoimprinting can produce subwavelength architectures at fiber sidewalls236,237,266. Different fabrication technologies for meta-structured fibers are briefly compared as the following.
a Summary of different fiber fabrication methods76,229,283,287,288,289,290,291,292,293,294. b Nanotransfer. b1 Wet-transferred gold nanoslit grating membrane on a fiber facet288. b2 âDecal transferâ schematics296 and SEM image of the transferred structure. b3 Template stripping transfer via UV-curable polymer (green hemisphere) on fiber tip289. b4 Mounting technique103. b5 Micromanipulation set-up299. b6 Template transfer method and the fabricated fiber facet301. c Femtosecond laser writing lithography. c1 Fiber facet-integrated spiral zone plate290. c2 On-fiber multi-lens objectives and structure details305. d FIB milling. d1 Fabricated plasmonic fiber meta-tip76. d2 SEM image of a tapered fiber probe grating261. d3 Fiber tip engraved by FIB262. e Nanoimprint. e1 Nanoimprint and transfer lithography procedures310. e2 SEM images of U-grooves for fiber array alignment and the imprinted structures291. e3 The imprinted fiber facet and close-up structure details311. e4 Direct imprinting thermal drawing schematic and resolution test patterns (e5)266. f Process schematic for EBL on fiber facet and SEM image of the fabricated structure101. g âAlign-and-shineâ photolithography286. Insets: fabricated structures. g1 Interference lithography (IL). Lower panel: Fabricated patterns using IL285. g2 Resist patterns produced by 3D photolithography316. h Thermal drawling of a metamaterial fiber246. i Metamaterial fiber preform and a typical drawling transition region282. j Iterative drawling with assembled fibers array320 and (k1) single fiber obtained from previous steps321. (k2) Preform assembly schematic to produce various metamaterials fibers (with SEM images shown in lower panels)321. Panels adapted from: ACS101,103,288,296; IEEE262,289; OSA261,282,285,299; The Royal Society301; AIP Publishing290,310; Springer Nature246,266,305,320,321; Wiley76,291; IOP Publishing286,311,316.
Nano-transfer
Nanotransfer is a straightforward method that transports as-fabricated meta-structures to fiber facets to circumvent the difficulty of direct nanofabrication on small fiber tips, as shown in Fig. 7b. The transferred meta-structures inherit the high resolution from conventional nanofabrication methods. However, most transfer processes have relatively low throughput and defects can be induced during the transfer. Figure 7b1 illustrates a wet-transferred meta-tip working as a flexible passband filter288 using sacrificial layer and water bath scooping. The meta-structures can be also fabricated by ânanoskivingâ techniques in an inexpensive manner229,295 for wet-transferred to fiber facets. For dry transfer, a âdecal transferâ technique using sacrificial films (Fig. 7b2)296,297, and a cost-effective template stripping method using ultraviolet (UV) light-curable hybrid polymer (Fig. 7b3)289 are proposed. Another âstamping-likeâ method is sketched as Fig. 7b4103, where the plasmonic metasurface is mounted at fiber facet via epoxy298. Direct mechanical transfer is also reported299 (Fig. 7b5). Figure 7b6 depicts a template transfer approach300 to produce high quality and robust plasmonic structures for real-time biosensing110,301.
Direct laser writing
Leveraging femtosecond laser pulses and two-photon polymerization302,303, direct laser writing can be applied to define micro- structures at fiber facets. Despite submicrometer resolution has been achieved by this multiphoton lithography technology302,304, currently demonstrated structures on fiber facets generally have feature sizes bigger than light wavelength290,292,293,305,306,307. Nevertheless, fiber tips-integrated subwavelength meta-structures can still be envisaged with the steady trend of resolution improvement. Fig. 7c1 shows the SEM image of the laser-written micro-spiral zone plate at fiber facet for OAM generation290.
Although currently available material library for two-photon polymerization is slightly restrained, this approach, more importantly, can fabricate three-dimensional (3D) complex structures that are hardly accessible by conventional top-down lithography292,305. Polymerization only takes place in the vicinity of the laser focal spot and the location of the solidified voxels can thus be manipulated much freely302. Beside fiber facets, intra- waveguide sophisticated structures may be also defined by this technology308,309. Optomechanical307 and bionic structures303 can be fabricated as well. Figure 7c2 shows the colored SEM image of a compact triplet lens objective attached to an optical fiber305 for miniaturized endoscopes and imaging applications.
Focused-ion beam milling
FIB milling is another technology to produce intricate 3D nanostructures with high fabrication resolution. Precise subwavelength features can be defined at fiber facets75,76,96 and fiber sidewall236,237,261,262,263,266. Figure 7d1 shows the SEM image of an optical fiber meta-tip76, where a thin gold layer is first deposited on fiber facet and the metasurfaces are then written by FIB milling. Besides, elegant fiber sidewall architectures are also demonstrated (see Fig. 7d2, d3)261,262. Albeit to the advantages in fabrication accuracy and 3D nanostructuring, FIB has a slow throughput that precludes mass production. The optical response of the engraved nanostructures may be influenced by the gallium ions doping during the process229.
Nanoimprinting
Nanoimprint lithography is a high-throughput and cost-effective technology that utilizes molds to replicate predefined stamp topographies138. This method can produce various nanopatterns on fiber facets284,291,294,310,311,312 and fiber sidewall in parallel266. Figure 7e1 illustrates a nanoimprint process to transfer subwavelength period metal grating from the mold to fiber facet310 with a sub-15ânm feature using PDMS and SU-8 for chip-scale probing and testing, where U-grooves are optimized to settle the alignment issue291. However, for complex metasurface-on-fiber structures, the imprinting and alignment accuracy may still need amelioration. 3D nanostructures are also accessible284,311, such as the 3D beam splitter shown in Fig. 7e3311. Meanwhile, when combined with fiber drawling, nanoimprinting may also produce surface structures at fiber sidewall using roller molds (Fig. 7e4)266. Figure 7e5 depicts the fabricated patterns for resolution test. For its potential applications to optical fibers, the imprinted nanostructures have to stay close to the fiber core in order to evanescently interfere with the optical modes.
Electron beam and photolithography
Electron-beam lithography (EBL) is a time-consuming process but can produce high-quality subwavelength structures with high resolution. To apply EBL to define patterns on the tiny facets of optical fibers, modifications on apparatus are quired313, as conventional spin coating and exposure platforms are designed for big wafers. Figure 7f illustrate the exemplary procedures to pattern on facets using EBL (left panels), and the SEM image of the fabricated structures after ion-beam etching (right panel)101. âDip and vibrationâ coating technique314 is proposed for better resist coating uniformity. Customized rotating chuck and exposure holders are also explored to obtain better lithographic patterns on fiber facets313.
Photolithography has higher yield when working for large substrates, yet it also encounters challenges on resist coating, sample mounting and alignment of the optical fiber315. Figure 7g shows an âalign-and-shineâ photolithography process that can transfer microstructures from the mask fiber to target fibers286. Interference lithography is also applied to produce periodic nanopillars array on fiber facets285 (see Fig. 7g1). This approach has good resolution with simple experimental setup, but it is not applicable for metasurface with aperiodic or arbitrarily designed antennas. Furthermore, photolithography on fiber sidewall is also explored (as Fig. 7g2)316,317.
Preform-based fiber drawing
Fiber drawing of specific preforms can produce various metamaterial fibers with designed cross-sectional patterns extending over long lengths267,268,269,277, showing a promising inroad to high volume production. As is illustrated in Fig. 7h, a macroscopic preform assembled by stacking indium wires is applied to hot furnace and thermally drawn to produce microscopic features in the thin fiber246. During the process, the feature dimensions from the original preform can be reduced by order of magnitude268. The preform can be fabricated by assembly, drilling and 3D printing264,318,319. Currently demonstrated metamaterial fibers made by single drawling are mainly applied for THz and mid-infrared frequencies due to fabrication resolution246,247,282. Figure 7i shows metamaterial fiber preform with tin/soda-lime wire arrays and an exemplary transition region after drawling282.
To further produce structured fibers with subwavelength features, iterative drawling can be applied320,321 (see Figs. 7j, k1). After successive drawling, the diameter of the intra-fiber nanowires can be reduced from hundreds of microns to about 15ânm with good radial and axial uniformity320. As shown in Fig. 7k2, the drawn fibers can be further assembled into different metamaterial preforms with various spatial structure distributions for further thermal size reduction321. Despite these demonstrations are non-optical fibers, this technology may be further adapted to fabricate multifunctional optical metamaterial fibers by improving optical loss and structural quality.
Plasmonic meta-devices for controlling surface waves
Distinctive from previous chapters discussing propagating modes in meta-structured dielectric waveguides and optical fibers, in this section we will elaborate on the excitation and manipulation of surface wave (SW) modes using plasmonic meta-structures.
As a comparison, the optical modes in conventional fibers and waveguides are electromagnetic (EM) guided modes based on total internal reflection. The size of these optical elements is thus still wavelength scale constrained by diffraction limit, which severely hinders the high demand on device miniaturization. In contrast, EM SWs, including surface plasmon polaritons (SPPs) and their low-frequency counterpart spoof SPPs, are also eigen EM modes but instead highly confined at the material interface, which can find numerous applications such as super-resolution imaging209, enhanced light-matter interactions322, high-integration optical circuits323,324,325, bio-326 and chemical-sensing327, thanks to their deep-subwavelength and local-field enhancement characteristics. While natural SPPs only exist in optical frequency, the so-called spoof SPP modes are created in terahertz and microwave frequencies via patterning the highly conducting metal surfaces with subwavelength structures328,329. Recently, various meta-devices, including meta-coupler, meta-waveguide and circuits, are proposed to control SWs, providing us versatile possibilities for future on-chip optoelectronic applications150. Next, we will introduce the recent advances in SPP excitation and wavefront manipulations using these meta-devices.
Excitations of surface waves using plasmonic meta-waveguide couplers
To utilize the novel properties of SW modes, the first step is to excite them efficiently. Unfortunately, because of momentum mismatch, the impinging free-space light cannot be directly coupled to SWs in general. To this end, various conventional optical devices were proposed, including prism coupler and grating coupler330,331. However, these elements are either too bulky and/or low-efficiency, which greatly hampers their further applications in integrated photonics332.
In 2012, Sun et al. proposed a new strategy to couple free-space propagating waves (PWs) to localized SWs based on a gradient metasurface in metal-insulator-metal (MIM) configuration70. As the meta-atoms are illuminated by EM waves, anti-parallel currents will be induced inside two metallic layers, creating a magnetic resonance. Via carefully tuning their local geometric parameters, such metasurface can provide a linearly changed reflection phase with its gradient denoted as \(\xi = {{{\mathrm{d}}}}\varphi {{{\mathrm{/}}}}dx\). While the reflection phase changes slowly (i.e., ξ < k0, and here k0 denote the total wavevector of EM waves in vacuum), the metasurface will deflect the impinging wave to non-specular direction. Nevertheless, as ξ is large than k0, the metasurface cannot construct a far-field EM wave with an equal-phase plane, thus achieving PW-SW conversion, as shown in Fig. 8a. Both of the anomalous reflection and SW conversion effects can be described by the following equation:
where \(k_x^r\) represents the parallel wavevector of reflection beam and θi is the incident angle of impinging waves. It implies that the gradient metasurface will introduce an additional wavevector to input EM waves, addressing the momentum mismatch issue between PWs and SWs. Considering that the generated SWs on such inhomogeneous metasurface are not eigen EM modes, the authors further constructed a SPP meta-coupler via connecting a mushroom structure with the metasurface that can guide out the âdrivenâ SWs to eigen spoof SPPs. Such generic idea was soon realized based on other meta-structures working at various frequency regimes115,116,333. For instance, a polarization-dependent directional SPP meta-coupler working at telecom wavelengths was experimentally demonstrated115. The building block consists of a gold nanopatch and a thick gold film that are separated by a 50ânm-thick glass spacer. Via carefully designing both widths of atop nanopatches, they constructed two-dimensional gradient-phase metasurface that can couple input x- or y- polarized PWs to eigen SPPs propagating along two orthogonal directions, as depicted in Fig. 8b.
a Physical principle of PW-SW conversion by phase-gradient metasurface70. b Polarization-dependent directional SPP excitation at telecom wavelengths115 . c Helicity-dependent directional SPP excitations via PancharatnamâBerry (PB) phase metasurfaces113. d Schematic of terahertz Metasurfaces for spin-delink spoof SPPs excitation combining the resonant and PB phase gradient. Inset: Partial picture of the fabricated meta-structure119. e Schematic of aperture-based SPP meta-coupler for polarization-modulated directional SPP coupling. Inset: image of multiple parallel column aperture pairs spaced λSPP apart112. f A plasmonic meta-slit that can achieve flexible SPP focal length switching by the helicity of input circular polarized (CP) light122. g Ring-shape array of nano-slits for SPP hologram337. Panels adapted from: Springer Nature (a70, b115, c113); Wiley (d119, g337); AAAS (e)112; OSA (f)122.
Apart from the resonance-based metasurfaces, PancharatnamâBerry (PB) phase metasurfaces are also exploited to achieve helicity-dependent directional SPP excitations. As shown in Fig. 8c, a transmissive metasurface is composed by the elongated aperture array with constantly varied orientation angles113. Except for Bragg reciprocal wavevector, such metasurface can also provide an additional geometric phase based wavevector for impinging light, achieving the helicity-dependent directional SPP excitations at near-infrared wavelengths. While the handedness of input CP light is flipped, the excitation direction of SPP will be switched to opposite direction. In a following work, a MIM typed PB meta-coupler is further demonstrated to couple SPPs with their amplitude and phase independently modulated by the polarization state and polarization angle of incoming light114. However, the early PB meta-couplers usually suffer from low-efficiency issue. To address such challenge, a new scheme is reported to solve two fundamental issues widely existing in previous studies334. First, via carefully optimizing the polarization conversion efficiency of the building block, the PB meta-coupler is able to convert impinging EM waves to driven SWs with nearly 100% efficiency. Second, the guided-out plasmonic metal should be carefully designed to support both TM and TE spoof SPP mode, solving the polarization mismatch issue between input CP wave and guided-out SPPs. A realistic meta-coupler working in the microwave regime is designed and fabricated, exhibiting a high spoof SPP excitation efficiency of over 80%.
While PB phase metasurfaces possess the advantages such as dispersionless phase response and easy design/fabrication, they still encounter a strong restriction of spin-correlated functionalities. To overcome this limitation, Mueller et al. proposed an approach to design a single metasurface carrying two arbitrary and independent phase distributions for the input lights of two orthogonal polarization states (including linear, circular and elliptical ones). The combination of propagation phase and PB geometric phase enables us to delink two functionalities of the metadevices for two orthogonal polarizations152. Various multifunctional meta-structures leveraging Jones matrix toolbox are demonstrated for achieving either SPP excitations or non-specular beam deflections modulated by the spin states of incoming CP lights118,335. A new design scheme was soon proposed to simultaneously achieve high efficiency surface plasmon excitations and wavefront controls based on a single meta-coupler119,120. Except for designing a linear-phase profile along x direction, which is mainly responsible for surface plasmon excitations, they also added a specific phase profile along y direction to simultaneously modulate the wavefronts of generated SPPs. Via combining both resonance phase and PB phase together, such meta-coupler can achieve either SPP focusing, or deflection effect shined by different spin-polarized EM waves (see Fig. 8d).
Except for the meta-couplers based on wavevector compensation scheme, narrow apertures are also widely utilized to launch SPP modes depending on diffraction effect336. In 2013, an aperture-based SPP meta-coupler was proposed112 to realize polarization-modulated directional SPP coupling. For a single aperture, it approximately behaves like an in-plane dipole source that can emit SPP waves along both sides but with a phase difference of Ï. As illustrated in Fig. 8e, such meta-coupler can enable constructive or destructive interference of SPP on two opposite sides via carefully designing the individual orientation angles and spatial separation of the aperture pairs. Such aperture-based metasurfaces can not only launch directional SPPs, but also tailor their wavefront simultaneously122,337,338. For instance, Fig. 8f depicts a plasmonic meta-slit that can achieve SPP focusing with its direction and focal length flexibly switched by the helicity of input CP light122. The meta-devices are composed of single or double arrays of subwavelength nano-slits with their orientation angles satisfying the parabolic distribution. To construct more complicated near-field patterns, the double-lined metasurface was adopted to modulate both the local amplitude and phase of generated SPP via controlling the tilted angles of nanoslit pair. Benefiting from these two degrees of freedoms, the plasmonic SPP caustic curves, Airy beam, and complex holography (Fig. 8g) are successfully demonstrated337.
Manipulations of surface waves using plasmonic meta-waveguides
In the previous section, we have discussed how to employ meta-couplers to efficiently convert free-space light to near-field SPPs. For the future integration photonic applications, versatile on-chip manipulation the SPP beams is highly desirable, including SPP guidance, wavefront tailoring, and far-field emission.
Surface wave waveguides and circuits
Massive plasmonic meta-structures can be applied to construct meta-waveguides for SW transports and controls in deep- subwavelength scale, such as V-shaped grooves, hybrid nanowires, and plasmonic tapers339,340,341. In low-frequency counterpart, spoof SPP waveguides were also developed based on various structured surfaces328,342,343. In particular, an ultrathin and flexible comb-shaped plasmonic surfaces is reported to transport the conformal surface plasmons (CSPs) at the microwave regime344. As shown in Fig. 9a, such CSP modes can be bent, folded and even twisted with very low propagation and absorption losses on such surfaces with various curved configurations.
a Spoof SPP transmission lines constructed by subwavelength comb-shaped corrugated metal strips344: Fabricated samples (first row) and simulated electric field distributions (second row). b All-optical nanoscale SPP logic gates: Schematics (left panel)347 and representative SEM images (right panels). c SPP silver nanowire waveguide integrated with a single layer of MoS2 for second harmonic generation. Inset: Fourier imaging microscopy collecting signals348. d Inhomogeneous nanohole array fabricated on the silver film for SPP Airy beam generation by non-perfectly matched diffraction354. e Hyperbolic metasurface for SPP PSHE in visible regime124 . f Gradient-phase meta-wall for spoof SPP anomalous reflection. Inset: simulated abnormal spoof SPP reflection results in x-y plane73. g Schematic of the transmissive metawall router for the transformation of 2D SPP to 1D SPP in waveguides. Inset: Simulated current density in plasmonic router71. h SPP hologram meta-grating for vortex beam generation362. i SPP decoupling via phase-gradient metasurface127. Panels adapted from: PNAS (a)344; ACS (b347, c348); APS (d354, f73, h362); Springer Nature (e)124; De Gruyter (g)71; AIP Publishing (i)127.
Considerable efforts have also been devoted to SPP based integrated optical circuits. In 2011, a simple double-nanowire network was proposed to perform compact logic operations, via illuminating the two nanowire terminals by excitation lasers of specific polarizations and relative phases. Based on the plasmonic interference effect, such plasmonic network can direct guided SPP waves to corresponding output, exhibiting various functionalities of beam splitting, routing and switching345. Soon, a binary NOR gate was experimentally verified in a plasmonic network of four-terminal nanowires via cascading OR and NOT gates346. Meanwhile, several high-integration all-optical logic gates were developed (including OR, NOT, XOR, and XNOR ones) based on plasmonic nanoslot waveguides, exhibiting high intensity contrast and lateral confinement (see Fig. 9b)347.
The local-field enhancement effect in plasmonic devices sheds light on many on-chip photonic applications, such as tunable sources, nonlinear microscopy, all-optical switching, etc.348,349,350,351. For instance, Li et al.348 experimentally demonstrated the second harmonic generation (SHG) in a plasmonic nanowire waveguide (Fig. 9c). The sample consists of a crystallized silver nanowire and a single layer of MoS2 with large second order susceptibility. Shined by the excitation laser, the excited SPP mode will propagate and then be reflected back inside the nanowire. For these two counter-propagating SPPs, the momentum matching condition is automatically addressed, thus facilitating the nonlinear effect inside such system.
Wavefront control of surface waves
While some basic optical elements (e.g., dielectric triangular prism and cylindric lens) are initially adopted to control the propagation of SPP, they usually possess bulky size and limited functionalities352. Relying on Bragg scattering effect, the concept of plasmonic crystals was proposed to realize SPP beam reflection, splitting, interference and demultiplexing347,353. To construct more complicated near-field wavefronts, the non-perfectly matched diffraction effect is employed to generate SPP Airy beam and experimentally demonstrate its non-diffracting and self-healing properties, as shown in Fig. 9d354. An inhomogeneous nanohole array is fabricated on the silver film to provide a nonlinear phase modulation for input SPP. In addition, various proposals such as transformation based devices355,356 and holographic plates357,358, also showcase diverse opportunities for on-chip SPP manipulations.
The rapid development of plasmonic meta-waveguides has also opened up a new direction for near-field manipulations. In 2013, Liu and Zhang proposed theoretically a plasmonic metasurface constituted by metallic subwavelength grating that can support SPP modes with non-trivial (including flat and hyperbolic) dispersion relations. Several alluring phenomena such as anomalous-diffraction, non-diffraction and negative refraction of SPPs were numerically demonstrated123. As illustrated in Fig. 9e, such concept of hyperbolic metasurfaces for surface plasmon controls was soon experimentally verified in visible regime124. Other than these bulky meta-deivces, Dong et al. proposed a new concept to design ultrathin gradient metawalls (i.e., near-field version of metasurfaces) to achieve the arbitrary wavefront tailoring of SPP, such as SPP anomalous reflection (Fig. 9f), near-field focusing and Bessel beam generations73,359. Such meta-wall is constituted by ultrathin gradient-index microstructures and a metallic plate that can totally reflect incoming SPPs with specific reflection phases profile, leading to the versatile wavefront reshaping of SPP. This idea was soon further developed to achieve one-dimensional SPP line wave excitations with a transmissive metawall (see Fig. 9g)71. This find may be applied in modulating on-chip photonic networks.
Out-of-plane emission of surface waves
For numerous photonic applications, we also need to decouple near-field SWs to far-field PWs in a desired manner. While encountering some discontinuous interface (e.g., bump, hole, groove), SW can be partially scattered to free space but with the radiation intensity and direction hardly controlled360. Periodic apertures are utilized for achieving directional out-of-plane emission of SPP361. As shown in Fig. 9h, holographic images can be created by incorporating the computer-generated hologram technology with bragg meta-grating to decouple SPP to free-space362. Other complex wavefronts, like accelerating Airy beam, focused beam, vortex beam are also suitable for this method363,364,365. In addition, Fig. 9i shows H-shaped gradient-phase metasurfaces to guide the spoof SPP modes on metallic strips to directional radiative waves127. According to the generalized Snellâs law, the emission direction can be flexibly modulated by the phase gradient of the metasurface. Further utilizing the dispersive nature of spoof SPP mode, a broadband frequency scanning antenna is created based on such gradient metasurface, exhibiting a continuous scanning range from 4.8° to 37.2° operating at 8.8â10.7âGHz128.
Inverse-designed metamaterial waveguides
Forward-designed metamaterial discussed in previous sections generally starts from a well-established library of structure templates, followed by customized tuning with a handful of specific parameters based on applications. Despite the clear physical guidelines offered by these intuition-based strategies, the device structures are usually not fully optimal and do not consider the massive design space of irregular structures. Furthermore, some sophisticated functionalities such as ultracompact and multifunctional devices are hard to design using forward design methods15.
To settle these challenges, various numerical algorithms have been developed that allow a computer to design and optimize freeform metamaterial waveguide structures with dramatically boosted degrees of design freedom to maximize device performance. These computer algorithm-based inverse-design strategies offer a potentially effective and automated method to âdesign-by-specificationâ15,147, in a manner following computer aided design techniques that are well established in the integrated circuit design community.
Inverse-designed metamaterial waveguides can be classified into two categories: analog and digital62,67,68,69. To design a device, the design region is first specified and then discretized into M à N unit shapes, called âpixelsâ. The âpatternâ is thus considered as a matrix of the pixels with permittivity distribution of [ε]MÃN, where each pixel (i, j) has a permittivity of εi,j accordingly. Then, algorithms are employed to find an optimized permittivity distribution to fulfill figure-of-merit (FOM). As exemplified in the upper panel in Fig. 10a, analog metamaterial waveguides generally have relatively small pixels366,367,368 \(\left( { \ll\!\! \lambda {{{\mathrm{/}}}}10} \right)\) to meet the perturbation theory369. Thus, the permittivity εi,j or its shape information can vary continuously to calculate the gradients information of the FOM (discretization is conducted later to produce binary devices)15. In contrast, pixel dimensions of a digital metamaterial waveguide are much larger (~λ/10) (lower panel in Fig. 10a)68,370, and the permittivity εi,j is restricted to binary distribution, e.g. corresponding to the logical â1â or â0â state.
a Binary etching states for analog and digital meta-waveguide patterns. Pixel dimensions of an analog pattern are much smaller to produce curvilinear device boundaries. Digital patterns have relatively big regular-shaped (e.g. rectangular or circular) pixels62. b Adjoint method schematic: two simulations are needed for each iteration15, a forward simulation using the incident source as excitation and an adjoint simulation using reciprocal displacement current \(\frac{1}{{{{{\mathrm{i}}}}\omega \mu _0}}\left( {\frac{{\partial {{{\mathrm{FOM}}}}}}{{\partial {{{\mathbf{E}}}}_{{{{\mathrm{old}}}}}}}} \right)^T\) as excitation source, where vector Eold is the value of the electric field at a given point before update. Sources for each simulation are marked in yellow. For level-set method, each point vector r on the boundary moves along its normal direction with a speed equivalent to the gradient value at this point. c Illustration of the iterative procedure in DBS algorithm. d The crossover and mutate mechanisms in a GA for reproducing new population.
In this section, we present explicit design tutorials and highlight representative applications using inverse-deigned metamaterial waveguide platforms. Diverse design algorithms are outlined and compared in terms of its versatility and applicability, including gradient-based, non-gradient-based and deep learning-inspired optimization methods.
Analog metamaterial waveguides
Analog metamaterial waveguides using sufficiently small pixels may have tremendous degrees of design freedom. To manage and explore this high dimensional design space in a computationally tractable manner, two classes of gradient-based optimization methods are typically considered: density topology optimization (TO) and level-set method, as shown in upper panels of Fig. 11. These methods, based on the adjoint method, are computationally scalable to systems comprising thousands and even millions of pixels because the number of simulations required to calculate gradients is decoupled from the total number of pixels147,367, which vastly broadens the generality and computational efficiency of inverse design. Gradient-based adjoint methods were introduced into nanophotonics in the early 2000âs by researchers from the mechanical engineering371 and control theory372 communities, where the adjoint method was established.
aâk Analog meta-waveguides inversely designed by density topology (TO) optimization. Note: non-subwavelength structures, like photonic crystals (PhC), are marked out. a A PhC waveguide Z-bend373 and b 90° bend374. c Metamaterial waveguide 90° bend375. d Polarization beam-splitter (PBS)376. e 3-channel mode multiplexer (MUX)377. f Planar nanolens378. g TE0-TE1 mode converter. h 3âÃâ3 hub58. i 2-channel wavelength de-MUX387. j Nonlinear microcavity388, k Optical Kerr switch366. lâs Level-set method. l A PhC with maximizing band gaps390. m 3âdB367 and n 1âÃâ3 power splitter. o Dual-channel mode MUX. p 2âÃâ2 power splitter. q 3-channel wavelength de-MUX391. r Cavity-waveguide coupler392. s Nonlinear PhC fiber393. tâz Hybrid method. t Wavelength de-MUX368. u Mode MUX395. v Fabry-Perot microresonator396. w Broadband chip-fiber grating coupler394. x Non-reciprocal pulse router397. y Laser-driven particle accelerator398,540. z Vertical coupler399. a1âj1 Digital meta-waveguides designed by direct-binary search (DBS) algorithm. a1 Waveguide coupler67. b1 PBS68. c1 Waveguide cloak64. d1 1âÃâ2 power splitter with arbitrary splitting ratio409. e1 Planar nanolens for focusing Bloch surface wave410. f1 Cascade multimode converter411. g1 3âdB power splitter370. h1 Dual-channel mode MUX415. i1 3-channel mode bend69. j1 1âÃâ2 mode converter422. k1âq1 Heuristic methods. k1 Fiber-to-waveguide coupler423. l1 Planar resonator424. m1 Broadband reflector425. n1 Wavelength pass filter426. o1 Wavelength router427. p1 Programmable light modulator428. q1 OAM emitter47. r1 Power splitter429. s1 PBS430. t1 Adjoint method procedures for digital meta-waveguides62. u1 Design examples62. Panels adapted from: AIP Publishing374; IEEE375,394,395; OSA58,62,67,367,370,373,377,388,392,393,396,409,415,422,423,424,425,426,427,428,429,540; De Gruyter387; SPIE376; ACS366,378,411; Springer390; Springer Nature47,64,68,69,368,391,397,399,410; Elsevier430.
Density topology optimization
Design procedures
(i) The permittivity values εi,j of each pixel are randomized and relaxed to span a continuum of values. (ii) Then, gradient descent algorithms perturbatively adjust the permittivity values at each pixel in a manner that improves the FOM, producing an analog pattern (shown in the bottom left panel of Fig. 10b). (iii) The continuous permittivity values of each pixel obtained in Step (ii) are pushed towards binary values, where only two boundary values can be chosen, and the FOM is reevaluated. Iterations are thus formed by going back to Step (ii) and (iii) to produce a new binary pattern.
Foundational results
Initial studies in the density topology optimization of nanophotonic devices are most linear devices, where the electromagnetic field satisfies the Hermitian condition. These demonstrations include, e.g. photonic crystal (PhC) waveguide Z-bend373 (Fig. 11a) and 90°-bend374 (Fig. 11b), where the optimized structure shows a significantly lower loss for a wider range of frequencies compared to forward designs. Density topology optimization has since been exploited to inversely design various waveguide devices with free-formed subwavelength features (Fig. 11câf), including, for instance, high-performance 90° waveguide bend375, polarization beam splitter376, three-channel mode multiplexer377, and nanolens with structural integrity378. More recently, density topology optimization was used to tailor guided-mode phenomena in freeform metasurfaces, leading to high efficiency379,380,381 and multifunctional devices382,383. New diffraction phenomena are enabled as well by analyzing these complex mode scattering dynamics384.
In contrast to typical TO schemes, an âobjective first methodâ was proposed to allow both electromagnetic filed and permittivity values to optimize individually385, which allows for non-zero physics residuals. Alternating directions method of multipliers (ADMM) algorithm were employed in the optimization process without using the adjoint method. A wider range of functional devices were investigated using the method58,386,387, including mode converter (Fig. 11g), hub (Fig. 11h), fiber coupler, optical diode, and polarization beam splitter, as well as multi-function device handling simultaneous focusing and wavelength demultiplexing (Fig. 11i).
For nonlinear devices, the electromagnetic field no longer satisfies the Hermitian condition and adjustments to the adjoint method are required. A 2D microcavity was designed for nonlinear frequency conversion by solving a linear adjoint equation with time-dependent material388 (Fig. 11j). Simplified nonlinear optimization was then explored based on a linear adjoint equation with time-invariant material366, followed by devising a compact photonic switch in Kerr nonlinear material (Fig. 11k).
Level-set method
Design procedures
(i) The boundary of the material subjected to Ï(r)â=â0 is allowed to vary continuously. During the optimization process, the boundary is time dependent and can be expressed as the zero solution of the level-set function .
The negative solution and positive solution of Ï(r, t) correspond to the regions filled with permittivity of two boundary values respectively. (ii) Then, the evolution of the boundary can be considered as a change of the level-set function with respect to t via gradients, as shown in the bottom right panel in Fig. 10b.
Foundational developments
A shape derivative method was proposed based upon the adjoint variable method and perturbation theory in the early 2000âs389, which enables the gradient descent algorithm based on shape derivative method. Level-set method is mathematically distinct from the shape derivative method, but essentially equivalent. Initial studies in the level-set method involved bandgap engineering of PhC devices390, as shown in Fig. 11l. Later research validated the feasibility of using this method to devise metamaterial waveguides. By parameterizing the boundary of the material with the level-set method, a high-performance silicon Y-junction splitter was designed in an ultra-compact area367 (Fig. 11m). A general level-set method was proposed for subwavelength featured waveguides that directly incorporates fabrication constraints, especially for curvature constraints on device boundaries391. A 1âÃâ3 splitter, mode demultiplexer, directional coupler, wavelength demultiplexer, and cavity-waveguide coupler391,392 were later reported (Fig. 11nâr). Besides, level-set method was used to design nonlinear waveguides, such as PhC fibers with large nonlinear frequency-conversion efficiencies (Fig. 11s)393.
Density topology optimization combined level-set method
Design procedures
(i) First, an optimized analog structure with gray permittivity is obtained using TO method. (ii) Then, the structure is binarized employed level-set method. The level-set method could theoretically prevent intermediate gray structures.
Foundational developments
Figure 11t shows a wavelength demultiplexer with wide bandwidths designed by simultaneous TO and level-set method368. The method was also used to design general 1D grating couplers without any human input from start to finish (including a choice of initial condition)394, as depicted in Fig. 11w. Various functional integrated devices had also been demonstrated as Fig. 11uâz395,396,397,398,399, such as mode multiplexer and mode splitter, Fabry-Perot micro-resonator, non-reciprocal pulse router for chip-based LiDAR, laser-driven waveguide-integrated particle accelerator, and diamond photonic waveguides.
Fabrication constraints for gradient-based algorithms
Despite the benefits discussed above, such analog devices nevertheless encounter challenges in terms of fabrication constraints. The TO method results in intermediate âgrayâ structures, but only binary permittivity distribution can be efficiently implemented in experiments for most cases. A wide variety of proposals are reported to mitigate this issue of âgrayâ areas in structure, such as density filters400, sensitivity filters401, penalty functions402, artificial damping403, and temperature parameter trick404.
In level-set method, small features, such as narrow gaps or bridges, are usually inevitable. A typical approach is to exploit shape parameterizations that automatically satisfy the desired minimum feature constraint, known as a geometry projection method405. Another approach is to evaluate a dilated and eroded version of the device during the optimization process with improved fabrication robustness and length scale constraint406. Curvature limit techniques are also useful for the removal of narrow gaps391. To enforce hard design constraints, methods based on reparameterization have been developed in which geometric parameters are initially defined in a continuous latent space and then mapped onto a physical device407. This mathematical mapping is specified such that devices that violate a given physical constraint, such as minimum feature size, are not even considered. This method has the advantage not only of enforcing hard constraints, but also of simplifying the design space and improving the reliability of the optimization process through elimination of non-compliant device patterns.
Digital metamaterial waveguides
Analog metamaterial waveguides utilize curvilinear device structures with high degrees of freedom but entail high fabrication resolution requirements. In contrast, digital patterns that utilize regular arrays of spatially coarse pixels can be designed and fabricated in an easier fashion. To date, most popular optimization methods for designing digital metamaterial waveguides fall into three classes: brute-force searching, heuristic, and adjoint methods, as shown in lower panels of Fig. 11.
Brute-force searching method
Design procedures
Take the direct-binary search (DBS) algorithm as an instance. (i) Fist is reversing the logical state of a randomly chosen or specifically designed pixel and evaluating the FOM. (ii) If FOM is improved, the new pixel state is kept and the next pixel is reversed; otherwise, the original state is recalled (Fig. 10c). (iii) One iteration ends when all the pixel states are inspected, and the final pattern is set as the initial one of the next iteration.
Foundational developments
DBS algorithm is a representative brute-force searching method introduced from digital hologram communities408. Massive digital metamaterial waveguides were invigorated using DBS algorithm, such as free-space- to-waveguide coupler67 (Fig. 11a1), polarization beamsplitter68 (Fig. 11b1), waveguide cloak64 (Fig. 11c1), power divider409 (Fig. 11d1), nanolens410 (Fig. 11e1), and mode converter411 (Fig. 11f1), optical diode66, 180° waveguide bend65, polarization rotator63, active optical switch412, polarization splitter-rotator413.
In Fig. 11g1, a photonic-crystal (PhC)-like metamaterial structure was proposed for 3 dB power divider that exploits partial-filling hole pixels to suppress the etch depth fluctuations caused by the reactive ion etching (RIE) lag414 and thus helps to improve fabrication tolerances370. A 5 dB performance increment was achieved compared with a device of similar size optimized based on full-filling rectangle pixels. Various PhC-like waveguides were also reported, including mode multiplexer415 (Fig. 11h1), on-chip routing69 (Fig. 11i1), star crossing416, wavelength demultiplexer417, polarization rotator418, multimode bend419, dual-mode crossing420, and power splitter421. Furthermore, a rotatable DBS algorithm that adds a calculation of rotational dimension was proposed as Fig. 11j1 for simultaneous mode converting and power splitting422.
Heuristic method
Design procedures
Take the genetic algorithm (GA) as an instance. (i) Generating initial populations as the first generation. Each population is a matrix of pixel distribution. (ii) Evaluating each populationâs FOM. (iii) Producing new populations with sequential application of selection, crossover, and mutation. Multiple strategies can be selected, e.g., roulette wheel or tournament selection. Each of the selected population has a specified or random probability to have a crossover with another population, where the crossover point is randomly picked (the left panel in Fig. 10d). After crossover, each population in the new generation has a probability of mutation, where a random number of pixels are selected to reverse (right panel of Fig. 10d). Iterations are thus formed by going back to Step (ii) to evaluate the new generation and population reproduction in Step (iii).
Foundational developments
As DBS algorithm mostly converges to a local optimum, it is more suitable for optimizations in a small parameter space. With a large parameter space, heuristic method, such as genetic algorithm (GA) and particle swarming optimization (PSO), are more competitive. Fig. 11k1 sketched a GA-optimized SiO2/SiON telecom-fiber to ridge-waveguide coupler423, with a 2 dB enhancement in efficiency compared with direct coupling. As shown in Fig. 11l1âp1), GA was then extended to a wider range of technologically relevant applications, such as silicon planar resonator424, reflector425, long-pass filter426, wavelength router427, and light modulator428. More recently, GA method was combined with simulated-annealing algorithm to enable accurate phase control in freeform meta-waveguides, contributing to high efficiency devices for complicated mode conversion from guided modes to free space (e.g., orbital angular momentum emitter47 shown in Fig. 11q1).
On the other hand, the particle-swarm optimization algorithm also can be applied to design metamaterial waveguides (see Fig. 11r1, s1), such as 2âÃâ2 power splitter429 and polarization beam splitter430. Particle-swarm optimizations are based on the movements of a population of candidate solutions (particles) in the search space. During optimization, the initially distributed particles continue moving towards the then-current optimum particle in the swarm, until the FOM is reached431.
Adjoint method
Design procedures
(i) Tuning the permittivities of all pixels with a fixed shape continuously and individually to obtain an optimized analog pattern with âgrayâ pixels using adjoint method. (ii) Then, a forced biasing approach was applied to convert the analog pattern to a âquasi-digitalâ one in which the permittivities of most pixels are close to two boundary values. (iii) Fabrication-constraint brute-force quantization methods were designed to transform the âquasi-digitalâ pattern into an âN-ary digitalâ pattern, as illustrated in Fig. 11t1.
Foundational developments
Distinctive from the TO or lever-set method, gradient information is generally hard to retrieve for digital meta-waveguides. Without gradients to efficiently update searching direction, convergence of these optimization algorithms is often considerably slower. Fortunately, recent research validated the feasibility of adapting the adjoint method into the inverse design of digital meta-waveguides. As shown in Fig. 11u1, a 3 dB power divider and a dual-mode multiplexer were demonstrated62, using PhC-like subwavelength structure with cylindrical-shaped base pixels in design region. At the implementation stage of âN-ary digitalâ pattern, cylinders with different âgrayâ permittivities in the âquasi-digitalâ pattern are replaced with air cylinders with original radius, silicon cylinders, or air cylinders with Nâââ2 different radii on the basis of effective medium theory to minimize the performance degradation due to the digitalization process. Compared with the conventional DBS method, the introduction of adjoint method can improve design efficiency by about five times, while the performance optimization can reach approximately the same level.
Deep learning enabled inverse design in metamaterial waveguides
Artificial neural networks (ANN) are algorithms that utilize a series of nonlinear mathematical functions, in the form of neurons, to specify highly nonlinear mappings between inputs and outputs148. A training process, in which weights within the neurons are iteratively adjusted, is used to tailor these mappings. ANNs have been a topic of study for the last half century and have gained immense popularity in nearly every technical field of research over the last decade due to the emergence of the deep network framework, user-friendly software packages, and application-specific hardware432,433. The deep ANN framework, where many layers of neurons are utilized in the algorithm, has led to particularly versatile and expressive algorithms that can serve as universal functional approximators. Software packages, ranging from PyTorch to TensorFlow, have led to standardized and easy-to-program interfaces to implementing ANNs with arbitrary architectures432. Specialized hardware includes graphical and tensor programming units that can dramatically speed up the network training process. Furthermore, the culture of opening and sharing in the machine-learning community leads to the availability of many state-of-the-art algorithm resources easy to access and follow up online432,434 (https://github.com/iguanaus/ScatterNet, http://github.com/yuruiqu/Transfer-learning_Data, https://github.com/PRGatech/DimensionalityReduction).
In this section, we give an overview of inverse-design methods based on discriminative networks, generative networks, and reinforcement learning. While we will present examples from the broader context of nanophotonics design (see Fig. 12), the concepts can readily apply to meta-waveguide design without loss of generality148,432,435.
aâc Inverse design with discriminative ANNs. a A convolutional neural network (in conjunction with DBS algorithm) for designing all-dielectric metasurface439. b Tandem network (an inverse network connected to a pretrained forward modeling network) for designing multiple thin film stacks440. c Meta-waveguide inversely designed by residual deep neural network (ResNet)487. dâh Generative ANNs. d A conditional VAE network for designing analog power splitters with various splitting ratios61, where etch hole positions are the design space. e A GAN network for metasurface that supports tailored transmission spectral responses448, with three networks: the generator, the simulator, and the critic. f A conditional GAN network for designing meta-grating449. g A modified GAN network consisting of three principal features: progressive network growth, the self-attention mechanism, and progressive growth of the training set450. h A global topology optimization network (GLOnet)452. Optimization is done by coupling a generative network with direct electromagnetic solver. i Inverse design of metasurface hologram with reinforcement learning457. Initial structure used as the input double deep Q-learning network (DDQN) at each step. Panels adapted from: OSA (a)439; ACS (b440, e448, f449, g450, h452); Springer Nature (c487, i457); Wiley (d)61.
Inverse design with discriminative ANNs
Discriminative ANNs are algorithms that can capture data relationships of the form yâ=âf(x) When x specifies a device pattern and y is its optical response, the discriminative ANN serves as a surrogate electromagnetic (EM) solver, solving the forward problem432. To train a discriminative ANN, a training set of known device patterns and optical responses is first created using a conventional EM solver. The ANN is then trained to minimize error between the outputted and known optical responses, for given device pattern inputs. Mathematically, the loss function is defined to be the mean square error between the outputted and ground truth optical responses, and this function is minimized during the training process by applying back-propagation algorithm148. While the training data collection and ANN training are computationally expensive, a trained ANN can perform computations orders of magnitude faster than a conventional solver. A challenge to training an accurate and generalized ANN is curating a sufficiently large and diverse training set that properly represents the desired computation space. A basic and typical strategy is to use a random, uniformly distributed set of devices432. If there are known, statistically rare features pertaining to the device geometry or optical response, these features can be learned by the ANN by augmenting the training set with a disproportionally large number of examples of these data.
Discriminative ANNs can be used for inverse design in multiple ways. One is that the surrogate solver can be used in conjunction with conventional optimization methods, which include evolutionary strategies436, particle-swarm optimization437, and brute-force sweeping and searching438,439. Many of these strategies typically require hundreds to thousands of simulations performed in series, and the utilization of an accurate high-speed solver can reduce total optimization times from hours or days to seconds, one example is illustrated in Fig. 12a439. Another way is to use the trained forward ANN to facilitate the training of an inverse network, which attempts to output a device pattern given a desired optical response input440 (shown in Fig. 12b). The reason why the tandem network is trained, as oppose to direct training of an inverse network, is that the inverse problem is a one-to-many mapping problem: there exist multiple device patterns that can produce the same optical response. This type of mapping cannot be captured by a discriminative network, which can only capture one-to-one or many-to-one relationships. The trained forward ANN reduces the one-to-many mapping issue because it is not an exact surrogate simulator and only approximates the complex, degenerate design space. Tandem networks have been used to design thin film stacks440, color filters441, and topological photonic structures442. To tackle the one-to-many problem, several solutions have also been developed, including conditional generative adversarial networks and conditional variational autoencoders, where a latent vector is introduced in the ANN to address potential multiple solutions433.
Discriminative ANNs can also perform inverse design using the backpropagation method. Previously, backpropagation was discussed in of network training, where gradients to neuron weights were calculated to minimize the loss function. To perform inverse design with a trained discriminative ANN using backpropagation, the loss function is defined as the difference between the output and desired optical responses and backpropagation is used to calculate gradients to the input device pattern x to minimize the loss function. This method has been used to inversely design scatterers443 and photonic crystals444. The concept can also be applied to more complex computational graphs that combine ANNs with analytic physical expressions445. Furthermore, a neural-adjoint method that adds the boundary loss to the loss function is proposed to improve performance446,447.
Inverse design with generative ANNs
Deep generative networks448,449,450 are architecturally similar to discriminative networks except that one of the inputs to the network is a latent random variable z. As such, the output to the network is a distribution, typically of device patterns, which can be generated by sampling z. There are two general inverse-design concepts based on generative networks. The first is to train a generative network to produce distributions that mimic a training set of device patterns. For networks where the input is the desired optical response and z, the generator functions as an inverse network: z is sampled to produce an ensemble of candidate devices, which are then evaluated and filtered to identify devices with suitable performance. For networks where the input is a device operating parameter (i.e., operating wavelength or material index) and z, the generative network can be used for interpolation and output devices with operating parameters not found in the training set.
There are different ways for generative networks to learn training set distributions. One way is with variational autoencoders (VAEs), which consist of two parts: an encoder that maps device patterns onto a low dimensional latent space distribution, and a decoder that maps latent space data representations back to device patterns. The loss function includes a reconstruction term, which minimizes differences between the inputted and outputted device patterns to the full network, and regularization terms that tailor the latent space distribution to fit a Gaussian profile. As shown Fig. 12d, VAEs have been used to design analog power splitters with various splitting ratios61, and digital multimode interference waveguides were designed by training a VAE in tandem with a pretrained forward network451. Another way to train generative networks is with the generative adversarial network (GAN) framework, where the generative network is trained together with a discriminative classification network that attempts to distinguish whether an input device is fake (i.e., from the generative network) or real (i.e., from the training set). Over the course of training, the discriminator gets better at distinguishing real and fake devices while the generator produces more realistic looking devices. Upon the completion of training, the generator fools a trained discriminator by outputting a distribution of devices mimicking the training set. GANs have been used to design freeform metasurfaces that support tailored spectral responses448 and high efficiency meta-gratings449,450 (Fig. 12eâg).
A second concept for inverse design with generators is based on the dataless training of generative networks to perform a population-based search for the global optimum452,453. These networks are termed global topology optimization networks (GLOnets) and the network training procedure works as follows. Initially, the outputted distribution from the generative network spans the full design space such that sampling z produces a batch of random devices. These devices are evaluated by an EM solver to quantify their performance and performance gradients (i.e., pattern modifications that improve performance), and these performance metrics are used to calculate a special loss function. Back-propagation is used to modify the network based on this loss function, such that the device distribution outputted by the network narrows and gets biased towards higher performance regions of the design space. This process is repeated and the device distribution from the network output distribution eventually collapses, ideally around the global optimum. Initial GLOnet demonstrations were used to optimize metasurface patterns, and the final freeform devices had efficiencies that were consistently better than those designed using gradient-based optimization452 (Fig. 12h). GLOnets were also demonstrated to be compatible with reparameterization to enable the global search of metasurfaces with hard minimum feature size constraints407. Subsequent improvements to the stability and performance of GLOnets have been made in thin film stack optimization, through judicious selection of the network architecture453. These concepts showcase the great potential of hybrid algorithms to interface physics and data sciences.
Inverse design with reinforcement learning
In reinforcement learning, a neural network learns to specify a sequence of actions within an environment in a manner that maximizes a cumulative reward454,455,456. These concepts have been popularized with their application to games, such as Atari games or Go, and have had significant technological impact in fields ranging from robotics to communications457. By training a deep network to play the game many times, initially with random actions (i.e., exploration) and later with actions informed by past experiences, the network will learn to specify an optimal action that maximizes current and future rewards. The consideration of cumulative rewards during the training process allows the algorithm to balance trade-offs between long-term and short-term reward gains432.
The framework of reinforcement learning naturally maps onto the iterative optimization process for nanophotonic devices. In this context, the state is the device pattern at a given iteration, the action is a modification to the pattern, and the reward combines the present and future device performance as quantified by the FOM. As the reinforcement learning algorithm learns from many trajectories through a design landscape and is based on maximizing cumulative reward, the device pattern modification suggested by the algorithm in a given optimization iteration is not simply the modification that produces the largest improvement to the FOM, which is the case in gradient-based optimization. Rather, the algorithm will suggest trajectories through a design landscape that can sidestep local optima in an attempt to maximize the performance of the final device. It is noted that the training process for reinforcement learning is computationally expensive, and the simulation of devices over many trajectories through a design landscape can take days on a conventional CPU, even for relatively basic problems. These algorithms are therefore more practically implemented when paired with accurate surrogate simulators. Reinforcement learning has been used to design periodic dielectric metasurfaces that support tailored spectral responses454, multi-layer structures455, perfect absorbers456, and metasurface holograms457 (Fig. 12i).
Comparisons of different design methods
Table 1 summaries several representative metamaterial waveguides (usually with wavelength-scale dimensions) to briefly compare the inverse-designed methods discussed above. As the landscape of a metamaterial waveguide is generally non- convex, currently it is still not mathematically possible to guarantee global optimal solutions in inverse-design optimization problems15,58. Despite that certain global search or reinforcement learning algorithms47,432,452 attempt to maximize the performance of the final device, but global optimum still not surely undertaken. Some active research area have been developed to explore the computational bounds on the true optimal value of an given optimization problem, which essentially derive from Lagrange duality458, local power conservation459 or diagonal physics dual460 based on the basic properties of the constraints and objective functions. Such bounds not only help to provide guidelines to the maximal device performance possible within physical limits, but also can be used to rule out constraints and objective functions for which no device pattern can achieve such good objective value.
Gradient-based algorithms (e.g., TO or level-set method) have many advantages, such as faster convergence and powerful mathematics-handling capacity particularly with lager parameter space. However, fabrication constraints are usually necessary. Imposing a larger feature size constraint in the optimization may deteriorate the performance461. In some extreme cases, the inverse-design algorithm could not find photonic structures on-demand even without imposing fabrication constraint462, the theoretically achievable performance or the desirable functionality may be ultimately bound by material constraints.
Non-gradient-based algorithms (such as DBS, GA or PSO algorithms) are usually easy to implement and need few mathematical requirements (e.g. complex gradient calculations are not needed). However, the convergence is often considerably slower, particularly when the objective function or parameter space becomes complex. To mitigate this issue, parallelizing the algorithm and using larger clusters of processors would be necessary463. On the other hand, although digital devices inspired by these non-gradient-based optimization methods has developed rapidly and achieved remarkable successes in many fields, most of the optimization methods are less involve with more complex physics problems, such as some emerging applications in nonlinear optics366,388,393.
For deep learning methods, it is possible to accelerate the simulation and design of optical devices in an effective and efficient manner438,464,465. The choice of neural network architecture and training strategy depends largely on the type of photonic system being analyzed. For systems that are relatively low dimensional and can be described by fewer than approximately ten independent geometric parameters, a discriminative neural network can effectively serve as a surrogate solver for that system and can be used in various optimization strategies to perform inverse design. These networks do require a large, one-time computational investment into a training set, making the neural network approach appropriate only when it involves systems, such as color filters or meta-atoms, where a wide range of layouts and optical responses are of interest. If a library of useful device shapes is known and are useful guidelines for design, the GAN approach provides a direct route to learning and interpolating related shapes from this library. If the goal is to identify a particularly high-performance device from a computation space, GLOnets provides a strategy to effectively search for the global optimum, without the requirement of a training set.
Summary and outlook
In summary, optical waveguides have proven a canonical platform to integrate diverse functional subwavelength meta-structures to enable meta-waveguides with either novel functionalities or largely boosted device performance. Compared with conventional waveguides devoid of subwavelength structures, meta-waveguides can not only just guide and confine light, but also perform various functionalities underpinned meta-structures. Compared with photonic crystal waveguides, meta-waveguides can act as âdesigner artificial mediaâ (with distinctive waveguiding mechanism to photonic bandgap) that enable versatile and powerful control over light propagation with subwavelength precision.
By allying functional subwavelength structures with dielectric and plasmonic waveguide platforms, versatile coupling interfaces, on-chip optical signal processors, photonic neural networks, multifunctional routers, mode convertors, sensors, quantum and nonlinear devices can be envisaged. By integrating meta-structures with optical fibers, massive applications in optical communications, imaging, biomedical sensing and lab-on-fiber technologies can be realized in a flexible, compact and multifunctional manner.
Despite the concept of meta-waveguides is still in its infancy, exciting progress are hatching with bright perspectives and profound potential applications. As conceptually illustrated in Fig. 13, the advancement of meta-waveguides can not only extend meta-optics to the realm of guided electromagnetic waves and waveguide technology, but also promise to reshape the landscapes of photonic integrated circuits and massive emergent applications. The awaiting challenges are outlined as the following. A brief roadmap is also presented as Fig. 14 for future research.
Diverse meta-waveguide-based photonic devices can be competitive substitutes for conventional integrated optical scenarios with compact footprint, enhanced efficiency and multifunctionality. A laser-pumped microring frequency comb is distributed to cascaded wavelength division multiplexers (WDM) enabled by inverse-designed metamaterial waveguides (WG). Data can be encoded by variable optical attenuators (VOA) and fed to programmable mode convertors, which can be assembled into integrated photonic networks to perform analog computing of matrix-vector multiplication (MVM) for parallel convolutional processings177,523. The reconfigurable mode convertor can convert mode ΨA to ΨB (Ψ is TE or TM) with various distinguishable levels or to different spatial mode channels in a multimode waveguide541. The optical data are then collected via meta-couplers and meta-fibers with high efficiency and fidelity for further processing. Meta-waveguides can also facilitate on-chip optical signal processing, communications, display and sensing applications (shown as insets). Plasmonic meta-waveguides may shrink device footprint towards higher integration density. Meta-fibers can also find massive interconnects, signal shaping, biomedical sensing and micro-manipulation applications232,235. Device schematics are inspired from previous literatures12,177,194,235,523,541,542,543.
Current challenges, corresponding potential solutions and perspectives are briefly outlined. In the near-term, challenges in systematic device design, multifunctionality and reconfigurability require attention. For further practical applications, compatible integration and efficient fabrication should be properly addressed.
Challenges
Despite the exciting progress discussed above12,16,17,466, practical applications of meta-waveguides are still limited. Several challenges must be properly handled before such ideas may transfer from scientific demonstrations to viable real-word technologies in future.
First, reconfigurable meta-waveguides are highly desired. For most current cases, the device attributes are fixed after fabrication35,36,37,41,42,43,44,70,75,76,77. Further advancement of photonic integrated circuits and other applications will demand multi- functionality and reconfigurability of diverse photonic devices in a way similar to their electronic counterparts1. To this end, alliance from material platforms would be necessary. For instance, the meta-structures on top of waveguides can be mold by phase-change materials177 or two-dimensional materials40,467,468 to facilitate reconfigurable integrated devices. Lithium niobate is also recently emerging as an excellent electro-optic (EO) and nonlinear material platform469,470 with new opportunities for creating meta-waveguides. Other tunable mechanisms such as electrical-32,471, thermal-174,472, mechanical-, and all-optical control may be explored as well473.
Second, challenges in device design still exist. (i) For meta-waveguides designed by physical intuitions, a universal design framework is still elusive. Most explorations start from distinct physical models under different waveguide platforms with unique features51,70,75. (ii) For inverse-designed meta-waveguides, in scientific research-wise, some academic questions still remain open15, such as the existence of solution under given optimization conditions and the ultimate computational boundary. In application-wise, fully automated photonic inverse-design kits and integrated software tools still await development.
Third, as shared by all emergent technologies struggling to migrate from lab to real-word, meta-waveguides also have to settle challenges in scalable fabrication and compatible integration. The meta-structures generally pose stringent requirements on fabrication resolution12. Fabrication constraints should be considered in design process to pursue âefficient-to-fabricate structuresâ. Complementary metal-oxide-semiconductor (CMOS) compatibility to electronics needs to be addressed as well to eventually enable large-scale manufactures fitting the foundryâs process design kits1.
Detailed challenges and potential research directions are discussed below, according to different design directions and distinctive waveguide platforms.
Challenges for dielectric meta-waveguides
For instance, the substrate light leakage during guided wave and free-space light couplings via metasurface-decorated waveguides will reduce conversion efficiency. This issue could be solved by using waveguide-integrated distributed Bragg reflector substrate, layered structures, and topologically protected structures474,475. Besides, the intrinsic dispersive characteristics of the meta-waveguides should be also addressed for broader band operations.
In addition, most of the meta-waveguides introduced above are based on local metasurfaces146, where the desired device functionality is realized by independent scatterers ignoring the neighboring coupling of the meta-units145. These devices generally operate at single wavelength with phase-only manipulation, for instance, dielectric waveguides patterned with phase- gradient metasurface35,41,42,43,51. To thoroughly handle the detrimental effect of neighboring coupling on device performance and overcome the physical limitations of the local meta-structures146, we may need to entail nonlocal metasurfaces145.
Nonlocal metasurfaces rely on interactions between adjacent meta-units, showing unique advantages for designing multi- wavelength and multifunctional devices. A novel group theory145,146 is proposed to design metasurfaces supporting quasi-bound states in the continuum (q-BICs)476, showcasing excellent capability in multifunctional spectral/polarization control, wavefront shaping145 and leaky wave phase-amplitude holograms using waveguide-integrated metasurfaces28,80.
Challenges for optical meta-fibers
One of the salient challenges for meta-structured optical fibers is scalable and cost-effective fiber manufacture with desired subwavelength structures231,232. Photonic crystal fibers with comparatively bigger feature size are already commercially on- shelf, yet relevant technologies to massively produce optical fiber meta-tips and metamaterial fibers are still under development. A rich library of templates can be transferred from free-space metasurface to fiber facets. However, currently demonstrated optical fiber meta-tips fabricated by slow and expensive processes such as FIB milling and EBL75,313,314 are not suitable for commercial products. Photolithography and femtosecond laser writing on fiber facets and sidewalls require further amelioration on fabrication resolution290,292,293,305 and apparatus developments for better sample mounting and alignments101,313.
For optical fiber meta-tips, nanoimprint and self-assembly are two promising inroads towards high-throughput fabrication. Despite a sub-15ânm feature size is realized in imprinted fiber facet291, the structural quality and robustness still need further improvement311. Self-assembly is another cost-effective but âbottom-upâ method477,478. However, this approach also faces challenges in integrating diverse functional materials on unconventional fiber substrate and the accurate control over assembled structures and locations233. Meanwhile, most meta-tips deposit lossy metal on fiber facets75,100,231. Other materials that guarantee high light-matter interactions with low loss and fabrication robustness still awaits explorations.
For metamaterial fibers, the current resolution of side-wall photolithography is still not adequate for subwavelength features316. Thermal drawling of specific preforms instead offers unique advantages for market exploration. However, challenges such as low spatial resolution and insufficient axial and radial uniformity still recline ahead246,247. Although the resolution of a single drawing may be compromised, iterative and multiple drawling can largely reduce feature dimension from microns to tens of nanometers320,321. The drawn fibers can be assembled subsequently to produce metamaterial fibers with specific transverse structure distributions321. When transferring these techniques to produce optical meta-fibers, structural quality and reproducibility will require further attentions.
Challenges for plasmonic meta-waveguides
One long-standing challenge for plasmonic waveguide is lacking an efficient and integrated bridge to couple free-space propagation light into highly confined plasmonic modes70,332. On-chip in-coupling gratings can be adopted to convert input light beam to surface plasmons along metal, which is further focused by a taper-like region and then coupled into plasmonic waveguides479. Although a large portion of input light has the opportunity to be guided into the waveguide, such solution also suffers from low-efficiency and large-footprint issues. The rapid development of meta-structures offers us a high-efficiency, mini-sized, high-integration and multifunctional platform to manipulate both PWs and SWs70,112,113,114,115. However, an ideal meta-coupler to efficiently connect free-space optical mode and localized plasmonic waveguide mode is still under research480.
Plasmonic meta-waveguides can offer unique capabilities to transport and manipulate light in deep-subwavelength scale, which is especially desired for future highly integrated photonics324,344. Nevertheless, the large energy loss (including absorption loss and scattering loss) of highly confined plasmonic waveguide modes is another big issue that seriously hinders their practical applications481. To address this challenge, people have reported diverse hybridized meta-waveguides to concentrate more optical energies of plasmonic waveguide modes in low-loss materials (e.g., dielectric layers) instead of conventional lossy metals340,482,483,484. Besides, developing new plasmonic materials (e.g., metallic alloys, doped oxides and semiconductors) also attains intense attentions of the community481,485. The propagation length of such hybridized or new-material-based waveguide modes can be further improved486. In parallel, the low-cost and high-throughput fabrication techniques for creating high-quality plasmonic devices are always highly desired, which is the very foundation to suppress both kinds of systematic losses.
Challenges for Inverse-designed metamaterial waveguides
First, most optimization algorithms become less efficient when processing inverse problem with larger parameter space or big design area15. As device complexity increases, new electromagnetic simulation tools and optimization algorithms need to be explored, thereby improving the breadth of inverse-design problems. For Deep learning methods, many reported cases to date are still limited to simple nanophotonic optimization, such as free-space metasurface439,449,452,457. Challenges still exist in applying diverse artificial neural networks for designing waveguide-based devices487. Metamaterial waveguides generally have more complicated structures and the training dataset acquisition can be more time-consuming. Current explorations are mainly restrained in digital meta-waveguides with simple device functions61,464,487. For complex nanostructures with more degrees of freedom (e.g. analog meta-waveguides) or devices with multiple sophisticated functionalities, some pre-processing stages or modification of the model input or output may be required454,488,489.
Second, there still lacks a comprehensive physical model to tutor how to choose the design region and initial pattern153, especially in rigorous math to answer whether the functionality can be effectively realized or what is the ultimate performance achievable for an optical optimization problem459. As the landscape of a meta-structure is generally highly non-convex, a good initial condition is required and the computationally tractable method towards the global optimum of the objective function usually does not exist153. Different initial patterns may lead to different local-optimum even using the same iteration algorithm. One has to use multiple random initial patterns to generate many âoptimizedâ patterns and then select a relatively âbestâ one as the final pattern. For this purpose, several recent works have begun exploring physics-informed optimization methods based on prior physical model, helping to discuss the feasibility of inverse-design quantitatively415,418,420,421.
Third, a comprehensive and robust software platform490,491 to develop diverse inversely designed integrated devices still needs further development. Standardization in design process is required to accommodate fabrication constraints in commercial photolithography for different types of robust nanophotonic devices492.
Perspectives
Meta-waveguides with subwavelength functional structures offer an exceptional playground to develop novel integrated photonic devices and explore nanoscale optical phenomena493. As precise and powerful control over light propagation can be enabled by the meta-structures, light-matter interaction can be further magnified to enhance efficiency. Various emerging device functions still awaits exploring12.
Playgrounds for nanoscale optical physics and versatile integrated devices
Although in an early phase of research, metas-waveguides have already shown great potentials on manipulating light on-chip with excellent versality35,50,51,52. Their functionalities could be further extended for broader applications. For example, migrating different dynamic light control techniques achieved in free-space metasurfaces471,473,494 to meta-waveguides, for various new chip-integrated applications such as augmented/virtual reality (AR/VR) displays and optical ranging/LiDAR31,32,472. Beside passive devices, meta-waveguides can be also synergized with active components like waveguide-based lasers (to configure light emitting) and photodetectors495 (to enhance the light-matter interaction efficiency).
In addition, there could be further explorations on optical computing with metasurface incorporated waveguides177. Integrated photonics have proven ideal optical computing platforms for various tasks, including image processing and artificial intelligence, with unprecedented speed and lower power consumption191,496. It is possible that those capabilities can be implemented using either fixed or reconfigurable meta-waveguides for achieving complete on-chip operations with miniaturize device footprint and enhanced multifunctionality177,497. Meanwhile, integrated photonic platform may be also further developed to significantly miniaturize conventional free-space optical elements498,499. Advanced designs in integrated meta-gratings may also fuel further advancements of diverse applications both in imaging and information processing192,497. Moreover, recent advent of quantum silicon photonic chips also open the door towards practical quantum communication and computations with high scalability and compactness497,500,501. It is foreseeable that incorporation of meta-photonic structures with photonic integrated quantum chips can achieve more complex functions and bring them to the next level of miniaturization.
Furthermore, if we further engineer the imaginary part of the antennas refractive index (gain & loss) to exploit Parity-Time symmetry502 or applying dynamic index modulations503,504, the functionalities of the meta-devices can be further extended in a more interdisciplinary manner502,505,506,507,508.
Multifunctional fibers that can sense, image, and communicate
As an important member of meta-waveguide family, optical meta-fibers have shown massive applications in telecommunication, biomedical sensing and so on, by leveraging the flexibility and versatility of meta-fiber-based devices74,232.
With the aid of meta-fibers75,76 and multi-material fibers267, we can envisage multifunctional fibers that can sense104,232,234,249,294, image74,246,276,277, and communicate96,97,98,293 leveraging versatile subwavelength structures. The optical fibers cease to be just a simple waveguide and become a new all-around technological platform where different kind of materials and structures at nanoscale are suitably integrated around, on top or inside the fiber itself, allowing for the realization of advanced platforms from life science applications and lab-on-fiber (LOF) technology231 to optical computing234. The revolutionary idea here is to combine all the functional components of a generic optical system commonly employed in communication and sensing fields (light source, optical waveguide, photodetector, module to interact with the environment) into a single, flexible, multifunctional, and compact platform. This perspective will set a fundamental building block for the development of a new generation of portable, âplug-and-playâ, autonomous optical fiber chips to sense, elaborate and transmit sensorial data in remote locations without needing connection to any bulky instrumentation. The realization of all-in-fiber active optoelectronics platforms will break new grounds in many strategic sectors such as photonic computing and imaging, wearable technology, âinternet-to-thingsâ systems and telemedicine509,510, by avoiding components such as fiber tapers, grating couplers and bulk lenses that may strongly affect the performances, reliability, and footprint of current lab-on-a-chip devices.
Reliable metasurfaces-assisted ultra-low-loss light delivery and collection may also push optical imaging to a higher level with profound medical and clinical impact. Novel âintelligent needlesâ can be thus envisaged, for bio-manipulation, tissue and liquid biopsies, loco-regional echography and drug delivery with potential impact in precision medicine scenarios and clinically relevant investigations511.
On-chip plasmonic meta-devices in deep-subwavelength scale
The capability of confining long-wavelength optical radiations into collective charge oscillations at deep-subwavelength scale has made plasmons as excellent information carriers beyond diffraction limit150,330. Compared with conventional dielectric waveguides, plasmonic meta-waveguides can enable ultracompact on-chip optical functional devices of subwavelength dimensions16,17. Moreover, a new class of plasmonic meta-waveguide can enable intriguing plasmonic modes beyond those of conventional plasmonic waveguides, such as chiral-512, non-diffraction-123, complex-polarized-334, and conformal- SPPs344, providing us a versatile platform to manipulate near-field SWs.
Thanks to the unique characteristics of high speed in time and subwavelength scale in space, plasmonic meta-waveguide- based devices and circuits may serve as competitive complements and ideal links between conventional electric and photonic devices. So far, fruitful results on functional plasmonic meta-devices are keeping emerging, such as laser sources513, logic gates346, and photodetectors514.
Meanwhile, the development of plasmonic waveguides based on diverse new materials also reveals a promising future direction for information communication, optical computation, near-field sensing, electro-optic modulators, and so on. For instance, plasmon polaritons in graphene/hexagonal boron-nitride (h-BN) heterostructures exhibited a long intrinsic propagation length exceeding 10âµm (about 50 plasmonic wavelengths)515. Graphene can also be patterned with subwavelength structures to facilitate various meta-waveguide devices for beam steering516,517, non-reciprocal SPP propagation518 and topological edge plasmon519. In addition, plasmonic meta-waveguides carrying strongly enhanced local fields offer us a good platform for tunable light-matter interactions (e.g., nonlinear and Raman effects) when integrated with two-dimensional materials such as MoS2 and graphene348,520. Other material platforms like doped oxides and semiconductors can be good substitutes to conventional noble metals for high-performance tunable plasmonic devices481,521.
Smart metamaterial waveguides for photonic computing and deep learning
The long-standing grand challenge in efficient and systematic design of diverse nanophotonic devices may be circumvent by inverse-design methods15, which sheds light on integrated optics design automation to enable large-scale sophisticated circuits. Inverse design is especially suitable for developing meta-waveguides-enabled devices, as forward device topology design is much complicated and require specific manpower expertise. As integrated software tools for inverse design are ramping up recently (such as SPINS490 and Lumerical Inc.491), we can envisage fully automated integrated photonic meta-devices design kits and commercial EDA software in the future, where no special expertise in electrodynamics or integrated photonics is required in this âdesign-by-specificationâ scheme. Standardization and system level integration will be entailed in later stage as helpful catalyzer to push integrated meta-waveguide devices one step closer to real-word applications.
As fruitful results are keep emerging recently with enhanced device performance and even previously inaccessible novel functionalities387,422, inverse-designed metamaterial waveguides may hatch as a significant complement to integrated photonics mainstreams designed by physical intuitions395. A new twist in optical analog computing may take place, by shrinking bulky systems into elements in mere wavelength-size57,522. The metamaterial waveguide itself can be designed as âsmartâ media for photonic computing and artificial intelligence497,523, for realizing parallel mathematical operations (such as differentiation, integration, or convolution)57,524, object classification59,525, image analysis526, or feature detection527. In the meantime, inverse-designed meta-waveguides can also find its place in deep learning and neuromorphic photonics8,148 to facilitate chip-integrated high-speed photonic neural networks with low power consumption60,528,529. For instance, a metamaterial can be trained to perform vowel recognition for acoustic wave60. Analog computing can be thus implemented in a manner that relies on purposefully perturbing a given system in situ, instead of designing the material from scratch, showcasing applications in all-optical control428 as well as programmable meta-inclusions in the microwave regime530. Programmable meta-units are also explored as physical weights in an end-to-end deep learning integrated sensing pipeline to enable joint learning of optimal measurement process and a matching processing algorithm with improved latency531. With the aid of tunable materials, for instance phase-change materials and EO materials, meta-waveguides can venture photonic integrated circuits into new territories by providing diverse integrated devices with multifunctionality and reconfigurability177,532.
References
Marpaung, D., Yao, J. P. & Capmany, J. Integrated microwave photonics. Nat. Photonics 13, 80â90 (2019).
Miller, D. A. B. Optical interconnects to silicon. IEEE J. Sel. Top. Quantum Electron. 6, 1312â1317 (2000).
Sun, C. et al. Single-chip microprocessor that communicates directly using light. Nature 528, 534â538 (2015).
Atabaki, A. H. et al. Integrating photonics with silicon nanoelectronics for the next generation of systems on a chip. Nature 556, 349â354 (2018).
Caulfield, H. J. & Dolev, S. Why future supercomputing requires optics. Nat. Photonics 4, 261â263 (2010).
Zhong, H. S. et al. Quantum computational advantage using photons. Science 370, 1460â1463 (2020).
Spencer, D. T. et al. An optical-frequency synthesizer using integrated photonics. Nature 557, 81â85 (2018).
Bogaerts, W. et al. Programmable photonic circuits. Nature 586, 207â216 (2020).
Rickman, A. The commercialization of silicon photonics. Nat. Photonics 8, 579â582 (2014).
Wang, J. W. et al. Multidimensional quantum entanglement with large-scale integrated optics. Science 360, 285â291 (2018).
Elshaari, A. W. et al. Hybrid integrated quantum photonic circuits. Nat. Photonics 14, 285â298 (2020).
Cheben, P. et al. Subwavelength integrated photonics. Nature 560, 565â572 (2018).
Sun, L. et al. Subwavelength structured silicon waveguides and photonic devices. Nanophotonics 9, 1321â1340 (2020).
Halir, R. et al. Subwavelength-grating metamaterial structures for silicon photonic devices. Proc. IEEE 106, 2144â2157 (2018).
Molesky, S. et al. Inverse design in nanophotonics. Nat. Photonics 12, 659â670 (2018).
Zheludev, N. I. & Kivshar, Y. S. From metamaterials to metadevices. Nat. Mater. 11, 917â924 (2012).
Soukoulis, C. M. & Wegener, M. Past achievements and future challenges in the development of three-dimensional photonic metamaterials. Nat. Photonics 5, 523â530 (2011).
Jahani, S. & Jacob, Z. All-dielectric metamaterials. Nat. Nanotechnol. 11, 23â36 (2016).
Chen, H. Y., Chan, C. T. & Sheng, P. Transformation optics and metamaterials. Nat. Mater. 9, 387â396 (2010).
Soukoulis, C. M. & Wegener, M. Optical metamaterials-more bulky and less lossy. Science 330, 1633â1634 (2010).
Yu, N. F. et al. Light propagation with phase discontinuities: generalized laws of reflection and refraction. Science 334, 333â337 (2011).
Yu, N. F. & Capasso, F. Flat optics with designer metasurfaces. Nat. Mater. 13, 139â150 (2014).
Sun, S. L. et al. Electromagnetic metasurfaces: physics and applications. Adv. Opt. Photonics 11, 380â479 (2019).
Khorasaninejad, M. et al. Metalenses at visible wavelengths: diffraction-limited focusing and subwavelength resolution imaging. Science 352, 1190â1194 (2016).
Li, L. et al. Metalens-array-based high-dimensional and multiphoton quantum source. Science 368, 1487â1490 (2020).
Chen, W. T., Zhu, A. Y. & Capasso, F. Flat optics with dispersion-engineered metasurfaces. Nat. Rev. Mater. 5, 604â620 (2020).
Huang, L. L., Zhang, S. & Zentgraf, T. Metasurface holography: from fundamentals to applications. Nanophotonics 7, 1169â1190 (2018).
Overvig, A. C. et al. Dielectric metasurfaces for complete and independent control of the optical amplitude and phase. Light.: Sci. Appl. 8, 92 (2019).
Qian, C. et al. Deep-learning-enabled self-adaptive microwave cloak without human intervention. Nat. Photonics 14, 383â390 (2020).
Hu, Y. Q. et al. 3D-integrated metasurfaces for full-colour holography. Light.: Sci. Appl. 8, 86 (2019).
Joo, W. J. et al. Metasurface-driven OLED displays beyond 10,000 pixels per inch. Science 370, 459â463 (2020).
Park, J. et al. All-solid-state spatial light modulator with independent phase and amplitude control for three-dimensional LiDAR applications. Nat. Nanotechnol. 16, 69â76 (2021).
Li, G. X., Zhang, S. & Zentgraf, T. Nonlinear photonic metasurfaces. Nat. Rev. Mater. 2, 17010 (2017).
Sain, B., Meier, C. & Zentgraf, T. Nonlinear optics in all-dielectric nanoantennas and metasurfaces: a review. Adv. Photonics 1, 024002 (2019).
Guo, X. X. et al. Molding free-space light with guided wave-driven metasurfaces. Sci. Adv. 6, eabb4142 (2020).
Zhu, L., Yang, W. J. & Chang-Hasnain, C. Very high efficiency optical coupler for silicon nanophotonic waveguide and single mode optical fiber. Opt. Express 25, 18462â18473 (2017).
Arango, F. B., Kwadrin, A. & Koenderink, A. F. Plasmonic antennas hybridized with dielectric waveguides. ACS Nano 6, 10156â10167 (2012).
Benedikovic, D. et al. High-efficiency single etch step apodized surface grating coupler using subwavelength structure. Laser Photonics Rev. 8, L93âL97 (2014).
Benedikovic, D. et al. Subwavelength index engineered surface grating coupler with sub-decibel efficiency for 220-nm silicon-on-insulator waveguides. Opt. Express 23, 22628â22635 (2015).
Meng, Y. et al. Ultracompact graphene-assisted tunable waveguide couplers with high directivity and mode selectivity. Sci. Rep. 8, 13362 (2018).
Guo, Y. H. et al. Chip-integrated geometric metasurface as a novel platform for directional coupling and polarization sorting by spin-orbit interaction. IEEE J. Sel. Top. Quantum Electron. 24, 4700107 (2018).
Zhang, Y. B. et al. Spin-selective and wavelength-selective demultiplexing based on waveguide-integrated all-dielectric metasurfaces. Adv. Optical Mater. 7, 1801273 (2019).
Meng, Y. et al. Chip-integrated metasurface for versatile and multi-wavelength control of light couplings with independent phase and arbitrary polarization. Opt. Express 27, 16425â16439 (2019).
Meng, Y. et al. Versatile on-chip light coupling and (de)multiplexing from arbitrary polarizations to controlled waveguide modes using an integrated dielectric metasurface. Photonics Res. 8, 564â576 (2020).
Zhou, N. et al. Ultra-compact broadband polarization diversity orbital angular momentum generator with 3.6 à 3.6 µm2 footprint. Sci. Adv. 5, eaau9593 (2019).
Cai, X. L. et al. Integrated compact optical vortex beam emitters. Science 338, 363â366 (2012).
Xie, Z. W. et al. Ultra-broadband on-chip twisted light emitter for optical communications. Light.: Sci. Appl. 7, 18001 (2018).
Guo, R. et al. Bidirectional waveguide coupling with plasmonic Fano nanoantennas. Appl. Phys. Lett. 105, 053114 (2014).
Guo, R. et al. Plasmonic fano nanoantennas for on-chip separation of wavelength-encoded optical signals. Nano Lett. 15, 3324â3328 (2015).
Guo, R. et al. High-bit rate ultra-compact light routing with mode-selective on-chip nanoantennas. Sci. Adv. 3, e1700007 (2017).
Li, Z. Y. et al. Controlling propagation and coupling of waveguide modes using phase-gradient metasurfaces. Nat. Nanotechnol. 12, 675â683 (2017).
Wang, C. et al. Metasurface-assisted phase-matching-free second harmonic generation in lithium niobate waveguides. Nat. Commun. 8, 2098 (2017).
Wang, Z. et al. On-chip wavefront shaping with dielectric metasurface. Nat. Commun. 10, 3547 (2019).
Jahani, S. et al. Controlling evanescent waves using silicon photonic all-dielectric metamaterials for dense integration. Nat. Commun. 9, 1893 (2018).
Mia, M. B. et al. Exceptional coupling in photonic anisotropic metamaterials for extremely low waveguide crosstalk. Optica 7, 881â887 (2020).
González-Andrade, D. et al. Ultra-broadband nanophotonic phase shifter based on subwavelength metamaterial waveguides. Photonics Res. 8, 359â367 (2020).
Estakhri, N. M., Edwards, B. & Engheta, N. Inverse-designed metastructures that solve equations. Science 363, 1333â1338 (2019).
Lu, J. & Vuckovic, J. Nanophotonic computational design. Opt. Express 21, 13351â13367 (2013).
Khoram, E. et al. Nanophotonic media for artificial neural inference. Photonics Res. 7, 823â827 (2019).
Hughes, T. W. et al. Wave physics as an analog recurrent neural network. Sci. Adv. 3, eaay6946 (2019).
Tang, Y. H. et al. Generative deep learning model for inverse design of integrated nanophotonic devices. Laser Photonics Rev. 14, 2000287 (2020).
Wang, K. Y. et al. Inverse design of digital nanophotonic devices using the adjoint method. Photonics Res. 8, 528â533 (2020).
Majumder, A. et al. Ultra-compact polarization rotation in integrated silicon photonics using digital metamaterials. Opt. Express 25, 19721â19731 (2017).
Shen, B., Polson, R. & Menon, R. Increasing the density of passive photonic integrated circuits via nanophotonic cloaking. Nat. Commun. 7, 13126 (2016).
Shen, B., Polson, R. & Menon, R. Metamaterial-waveguide bends with effective bend radius < λ0/2. Opt. Lett. 40, 5750â5753 (2015).
Shen, B., Polson, R. & Menon, R. Integrated digital metamaterials enables ultra-compact optical diodes. Opt. Express 23, 10847â10855 (2015).
Shen, B. et al. Integrated metamaterials for efficient and compact free-space-to-waveguide coupling. Opt. Express 22, 27175â27182 (2014).
Shen, B. et al. An integrated-nanophotonics polarization beamsplitter with 2.4 à 2.4 µm2 footprint. Nat. Photonics 9, 378â382 (2015).
Liu, Y. J. et al. Arbitrarily routed mode-division multiplexed photonic circuits for dense integration. Nat. Commun. 10, 3263 (2019).
Sun, S. L. et al. Gradient-index meta-surfaces as a bridge linking propagating waves and surface waves. Nat. Mater. 11, 426â431 (2012).
Dong, S. H. et al. On-chip trans-dimensional plasmonic router. Nanophotonics 9, 3357â3365 (2020).
Gan, F. Y., Li, H. Y. & Chen, J. J. Tailoring the emission polarization with metasurface-based emitters designed on a plasmonic ridge waveguide. Nanoscale 11, 7140â7148 (2019).
Dong, S. H. et al. Highly efficient wave-front reshaping of surface waves with dielectric metawalls. Phys. Rev. Appl. 9, 014032 (2018).
Pahlevaninezhad, H. et al. Nano-optic endoscope for high-resolution optical coherence tomography in vivo. Nat. Photonics 12, 540â547 (2018).
Principe, M. et al. Optical fiber meta-tips. Light. Sci. Appl. 6, e16226 (2017).
Consales, M. et al. Metasurface-enhanced lab-on-fiber biosensors. Laser Photonics Rev. 14, 2000180 (2020).
Liu, A. P. et al. On-chip generation and control of the vortex beam. Appl. Phys. Lett. 108, 181103 (2016).
Zhou, N. et al. Generating and synthesizing ultrabroadband twisted light using a compact silicon chip. Opt. Lett. 43, 3140â3143 (2018).
Ha, Y. L. et al. Minimized two- and four-step varifocal lens based on silicon photonic integrated nanoapertures. Opt. Express 28, 7943â7952 (2020).
Huang, Z. Q., Marks, D. L. & Smith, D. R. Out-of-plane computer-generated multicolor waveguide holography. Optica 6, 119â124 (2019).
Ding, Y. M. et al. Guided-wave-driven photonic integrated metasurface holograms. In Proceedings of 2020 Conference on Lasers and Electro-Optics (IEEE, 2020).
Wang, R. D. et al. Broadband on-chip terahertz asymmetric waveguiding via phase-gradient metasurface. ACS Photonics 6, 1774â1779 (2019).
Ohana, D. & Levy, U. Mode conversion based on dielectric metamaterial in silicon. Opt. Express 22, 27617â27631 (2014).
Ohana, D. et al. Dielectric metasurface as a platform for spatial mode conversion in nanoscale waveguides. Nano Lett. 16, 7956â7961 (2016).
Xu, H. N. & Shi, Y. C. Subwavelength-grating-assisted silicon polarization rotator covering all optical communication bands. Opt. Express 27, 5588â5597 (2019).
Zhao, Y. et al. Ultra-compact silicon mode-order converters based on dielectric slots. Opt. Lett. 45, 3797â3800 (2020).
Yao, C. N. et al. Dielectric nanoaperture metasurfaces in silicon waveguides for efficient and broadband mode conversion with an ultrasmall footprint. Adv. Optical Mater. 8, 2000529 (2020).
Wang, H. W. et al. Compact silicon waveguide mode converter employing dielectric metasurface structure. Adv. Optical Mater. 7, 1801191 (2019).
Yao, C. H. et al. On-chip multi-mode manipulation via 2D refractive-index perturbation on a waveguide. Adv. Optical Mater. 8, 2000996 (2020).
Flueckiger, J. et al. Sub-wavelength grating for enhanced ring resonator biosensor. Opt. Express 24, 15672â15686 (2016).
Wang, Z. et al. High quality factor subwavelength grating waveguide micro-ring resonator based on trapezoidal silicon pillars. Opt. Lett. 41, 3375â3378 (2016).
He, L., Li, H. & Li, M. Optomechanical measurement of photon spin angular momentum and optical torque in integrated photonic devices. Sci. Adv. 2, e1600485 (2016).
Ding, Y. M. et al. On-chip integrated spectrometers based on metasurfaces on waveguides. Proceedings of 2020 Conference on Lasers and Electro-Optics (IEEE, 2020).
Sidiropoulos, T. P. H. et al. Compact optical antenna coupler for silicon photonics characterized by third-harmonic generation. ACS Photonics 1, 912â916 (2014).
Lin, Z. et al. Cavity-enhanced second-harmonic generation via nonlinear-overlap optimization. Optica 3, 233â238 (2016).
Xomalis, A. et al. Fibre-optic metadevice for all-optical signal modulation based on coherent absorption. Nat. Commun. 9, 182 (2018).
Xomalis, A. et al. Picosecond all-optical switching and dark pulse generation in a fibre-optic network using a plasmonic metamaterial absorber. Appl. Phys. Lett. 113, 051103 (2018).
Xomalis, A. et al. Cryptography in coherent optical information networks using dissipative metamaterial gates. APL Photonics 4, 046102 (2019).
Xiong, Y. & Xu, F. Multifunctional integration on optical fiber tips: challenges and opportunities. Adv. Photonics 2, 064001 (2020).
Yang, J. Y. et al. Photonic crystal fiber metalens. Nanophotonics 8, 443â449 (2019).
Wang, N. et al. Boosting light collection efficiency of optical fibers using metallic nanostructures. ACS Photonics 6, 691â698 (2019).
Kim, M. & Kim, S. High efficiency dielectric photonic crystal fiber metalens. Sci. Rep. 10, 20898 (2020).
Flannery, J. et al. Fabry-pérot cavity formed with dielectric metasurfaces in a hollow-core fiber. ACS Photonics 5, 337â341 (2018).
Wang, Q. & Wang, L. Lab-on-fiber: plasmonic nano-arrays for sensing. Nanoscale 12, 7485â7499 (2020).
Ricciardi, A. et al. Lab-on-fiber technology: a new vision for chemical and biological sensing. Analyst 140, 8068â8079 (2015).
Ricciardi, A. et al. Versatile optical fiber nanoprobes: from plasmonic biosensors to polarization-sensitive devices. ACS Photonics 1, 69â78 (2014).
Savinov, V. & Zheludev, N. I. High-quality metamaterial dispersive grating on the facet of an optical fiber. Appl. Phys. Lett. 111, 091106 (2017).
Chen, J.-h, Xiong, Y.-f, Xu, F. & Lu, Y.-q Silica optical fiber integrated with two-dimensional materials: towards opto-electro-mechanical technology. Light. Sci. Appl 10, 78 (2021).
Ehtaiba, J. M. & Gordon, R. Beaming light through a bow-tie nanoaperture at the tip of a single-mode optical fiber. Opt. Express 27, 14112â14120 (2019).
Jia, P. P. et al. Quasiperiodic nanohole arrays on optical fibers as plasmonic sensors: fabrication and sensitivity determination. ACS Sens. 1, 1078â1083 (2016).
Giovampaola, C. D. & Engheta, N. Digital metamaterials. Nat. Mater. 13, 1115â1121 (2014).
Lin, J. et al. Polarization-controlled tunable directional coupling of surface plasmon polaritons. Science 340, 331â334 (2013).
Huang, L. L. et al. Helicity dependent directional surface plasmon polariton excitation using a metasurface with interfacial phase discontinuity. Light. Sci. Appl. 2, e70 (2013).
Mühlenbernd, H. et al. Amplitude- and phase-controlled surface plasmon polariton excitation with metasurfaces. ACS Photonics 3, 124â129 (2016).
Pors, A. et al. Efficient unidirectional polarization-controlled excitation of surface plasmon polaritons. Light. Sci. Appl. 3, e197 (2014).
Sun, W. J. et al. High-efficiency surface plasmon meta-couplers: concept and microwave-regime realizations. Light. Sci. Appl. 5, e16003 (2016).
Ding, F., Deshpande, R. & Bozhevolnyi, S. I. Bifunctional gap-plasmon metasurfaces for visible light: polarization-controlled unidirectional surface plasmon excitation and beam steering at normal incidence. Light. Sci. Appl. 7, 17178 (2018).
Meng, C. et al. Optical gap-surface plasmon metasurfaces for spin-controlled surface plasmon excitation and anomalous beam steering. ACS Photonics 7, 1849â1856 (2020).
Wang, Z. et al. Excite spoof surface plasmons with tailored wavefronts using high-efficiency terahertz metasurfaces. Adv. Sci. 7, 2000982 (2020).
Li, S. Q. et al. Helicity-delinked manipulations on surface waves and propagating waves by metasurfaces. Nanophotonics 9, 3473â3481 (2020).
Xiao, S. Y. et al. Flexible coherent control of plasmonic spin-hall effect. Nat. Commun. 6, 8360 (2015).
Lee, S. Y. et al. Plasmonic meta-slit: shaping and controlling near-field focus. Optica 2, 6â13 (2015).
Liu, Y. M. & Zhang, X. Metasurfaces for manipulating surface plasmons. Appl. Phys. Lett. 103, 141101 (2013).
High, A. A. et al. Visible-frequency hyperbolic metasurface. Nature 522, 192â196 (2015).
Ma, H. F. et al. Broadband and high-efficiency conversion from guided waves to spoof surface plasmon polaritons. Laser Photonics Rev. 8, 146â151 (2014).
Wang, D. P. et al. Planar spoof surface plasmon polariton antenna by using transmissive phase gradient metasurface. Ann. Der Phys. 532, 2000008 (2020).
Xu, J. J. et al. Efficient conversion of surface-plasmon-like modes to spatial radiated modes. Appl. Phys. Lett. 106, 021102 (2015).
Fan, Y. et al. Frequency scanning radiation by decoupling spoof surface plasmon polaritons via phase gradient metasurface. IEEE Trans. Antennas Propag. 66, 203â208 (2018).
Rahm, M. et al. Transformation-optical design of adaptive beam bends and beam expanders. Opt. Express 16, 11555â11567 (2008).
Fu, Y. Y., Xu, Y. D. & Chen, H. Y. Applications of gradient index metamaterials in waveguides. Sci. Rep. 5, 18223 (2015).
Tsakmakidis, K. L., Boardman, A. D. & Hess, O. âTrapped rainbowâ storage of light in metamaterials. Nature 450, 397â401 (2007).
Reza, A., Dignam, M. M. & Hughes, S. Can light be stopped in realistic metamaterials? Nature 455, E10âE11 (2008).
Gan, Q. Q. et al. Experimental verification of the rainbow trapping effect in adiabatic plasmonic gratings. Proc. Natl Acad. Sci. USA 108, 5169â5173 (2011).
Luo, J. et al. Realizing almost perfect bending waveguides with anisotropic epsilon-near-zero metamaterials. Appl. Phys. Lett. 100, 221903 (2012).
Gabrielli, L. H. et al. On-chip transformation optics for multimode waveguide bends. Nat. Commun. 3, 1217 (2012).
Ni, X. J. et al. Broadband light bending with plasmonic nanoantennas. Science 335, 427 (2012).
Shneidman, A. V. et al. All-polymer integrated optical resonators by roll-to-roll nanoimprint lithography. ACS Photonics 5, 1839â1845 (2018).
Sreenivasan, S. V. Nanoimprint lithography steppers for volume fabrication of leading-edge semiconductor integrated circuits. Microsyst. Nanoengineering 3, 17075 (2017).
Miller, D. A. B. Device requirements for optical interconnects to silicon chips. Proc. IEEE 97, 1166â1185 (2009).
Joannopoulos, J. D., Villeneuve, P. R. & Fan, S. H. Photonic crystals: putting a new twist on light. Nature 386, 143â149 (1997).
van der Ziel, J. P. Phase-matched harmonic generation in a laminar structure with wave propagation in the plane of the layers. Appl. Phys. Lett. 26, 60â61 (1975).
Cheben, P. et al. Subwavelength waveguide grating for mode conversion and light coupling in integrated optics. Opt. Express 14, 4695â4702 (2006).
Soller, B. J. & Hall, D. G. Energy transfer at optical frequencies to silicon-based waveguiding structures. J. Optical Soc. Am. A 18, 2577â2584 (2001).
Quidant, R. et al. Tailoring the transmittance of integrated optical waveguides with short metallic nanoparticle chains. Phys. Rev. B 69, 085407 (2004).
Overvig, A. C., Malek, S. C. & Yu, N. F. Multifunctional nonlocal metasurfaces. Phys. Rev. Lett. 125, 017402 (2020).
Overvig, A. C. et al. Selection rules for quasibound states in the continuum. Phys. Rev. B 102, 035434 (2020).
Jensen, J. S. & Sigmund, O. Topology optimization for nano-photonics. Laser Photonics Rev. 5, 308â321 (2011).
Ma, W. et al. Deep learning for the design of photonic structures. Nat. Photonics 15, 77â90 (2021).
Miller, D. A. B. All linear optical devices are mode converters. Opt. Express 20, 23985â23993 (2012).
Meinzer, N., Barnes, W. L. & Hooper, I. R. Plasmonic meta-atoms and metasurfaces. Nat. Photonics 8, 889â898 (2014).
Arbabi, A. et al. Dielectric metasurfaces for complete control of phase and polarization with subwavelength spatial resolution and high transmission. Nat. Nanotechnol. 10, 937â943 (2015).
Mueller, J. P. B. et al. Metasurface polarization optics: Independent phase control of arbitrary orthogonal states of polarization. Phys. Rev. Lett. 118, 113901 (2017).
Su, L. et al. Nanophotonic inverse design with SPINS: software architecture and practical considerations. Appl. Phys. Rev. 7, 011407 (2020).
Chi, J. et al. High-performance mid-infrared frequency upconversion in lithium niobate waveguide patterned with metasurfaces. J. Phys. D Appl. Phys. 52, 035101 (2019).
Fang, B. et al. Second-harmonic generation and manipulation in lithium niobate slab waveguides by grating metasurfaces. Photonics Res. 8, 1296â1300 (2020).
Novotny, L. & van Hulst, N. Antennas for light. Nat. Photonics 5, 83â90 (2011).
Purcell, E. M. & Morin, D. J. Electricity and Magnetism 3rd edn. (Cambridge University Press, 2013).
Vercruysse, D. et al. Single asymmetric plasmonic antenna as a directional coupler to a dielectric waveguide. ACS Photonics 4, 1398â1402 (2017).
Kosako, T., Kadoya, Y. & Hofmann, H. F. Directional control of light by a nano-optical Yagi-Uda antenna. Nat. Photonics 4, 312â315 (2010).
Kullock, R. et al. Electrically-driven Yagi-Uda antennas for light. Nat. Commun. 11, 115 (2020).
Badawy, T. & Bertuch, T. Slotted waveguide antenna integrated with printed Yagi-Uda director array. Proceedings of the 13th European Conference on Antennas and Propagation 1â5 (IEEE, 2019).
Ma, L. et al. Yagi-Uda optical antenna array collimated laser based on surface plasmons. Opt. Commun. 368, 197â201 (2016).
Kim, J. et al. Directional radiation of babinet-inverted optical nanoantenna integrated with plasmonic waveguide. Sci. Rep. 5, 11832 (2015).
Février, M. et al. Giant coupling effect between metal nanoparticle chain and optical waveguide. Nano Lett. 12, 1032â1037 (2012).
Chen, B. G. et al. Hybrid photon-plasmon coupling and ultrafast control of nanoantennas on a silicon photonic chip. Nano Lett. 18, 610â617 (2018).
Magno, G. et al. Strong coupling and vortexes assisted slow light in plasmonic chain-SOI waveguide systems. Sci. Rep. 7, 7228 (2017).
Bruck, R. & Muskens, O. L. Plasmonic nanoantennas as integrated coherent perfect absorbers on SOI waveguides for modulators and all-optical switches. Opt. Express 21, 27652â27661 (2013).
Chen, C. et al. Waveguide-integrated compact plasmonic resonators for on-chip mid-infrared laser spectroscopy. Nano Lett. 18, 7601â7608 (2018).
Chen, C., Oh, S. H. & Li, M. Coupled-mode theory for plasmonic resonators integrated with silicon waveguides towards mid-infrared spectroscopic sensing. Opt. Express 28, 2020â2036 (2020).
Peyskens, F. et al. Surface enhanced Raman spectroscopy using a single mode nanophotonic-plasmonic platform. ACS Photonics 3, 102â108 (2016).
Beck, F. J. & Resonant, S. P. P. modes supported by discrete metal nanoparticles on high-index substrates. Opt. Express 19, A146âA156 (2011).
Lupu, A. et al. Metal-dielectric metamaterials for guided wave silicon photonics. Opt. Express 19, 24746â24761 (2011).
Smith, D. R. et al. Analysis of a waveguide-fed metasurface antenna. Phys. Rev. Appl. 8, 054048 (2017).
Poulton, C. V. et al. Coherent solid-state LIDAR with silicon photonic optical phased arrays. Opt. Lett. 42, 4091â4094 (2017).
Strain, M. J. et al. Fast electrical switching of orbital angular momentum modes using ultra-compact integrated vortex emitters. Nat. Commun. 5, 4856 (2014).
Shao, Z. K. et al. On-chip switchable radially and azimuthally polarized vortex beam generation. Opt. Lett. 43, 1263â1266 (2018).
Wu, C. M. et al. Programmable phase-change metasurfaces on waveguides for multimode photonic convolutional neural network. Nat. Commun. 12, 96 (2021).
Cheng, Z. et al. Sub-wavelength grating assisted mode order converter on the SOI substrate. Opt. Express 27, 34434â34441 (2019).
Huang, C. C. & Huang, C. C. Theoretical analysis of mode conversion by refractive-index perturbation based on a single tilted slot on a silicon waveguide. Opt. Express 28, 18986â18999 (2020).
Carletti, L. et al. Second harmonic generation in monolithic lithium niobate metasurfaces. Opt. Express 27, 33391â33398 (2019).
Ma, J. J. et al. Nonlinear lithium niobate metasurfaces for second harmonic generation. Laser Photonics Rev. 15, 2000521 (2021).
Sideris, S. & Ellenbogen, T. Terahertz generation in parallel plate waveguides activated by nonlinear metasurfaces. Opt. Lett. 44, 3590â3593 (2019).
Kim, S. et al. High-harmonic generation by resonant plasmon field enhancement. Nature 453, 757â760 (2008).
Escuti, M. J., Kim, J. & Kudenov, M. W. Controlling light with geometric-phase holograms. Opt. Photonics N. 27, 22â29 (2016).
Pancharatnam, S. Generalized theory of interference, and its applications. Proc. Indian Acad. Sci. Sect. A 44, 247â262 (1956).
Chen, X. Z. et al. Dual-polarity plasmonic metalens for visible light. Nat. Commun. 3, 1198 (2012).
Meng, Y. et al. Guided mode meta-optics: metasurface-dressed nanophotonic waveguides for arbitrary designer mode couplers and on-chip OAM emitters with configurable topological charge. arXiv Prepr. 2106, 03559 (2021).
Nadovich, C. T. et al. Focused apodized forked grating coupler. Opt. Express 25, 26861â26874 (2017).
Shen, Y. J. et al. Optical vortices 30 years on: OAM manipulation from topological charge to multiple singularities. Light.: Sci. Appl. 8, 90 (2019).
Yang, R. et al. On-chip metalenses based on one-dimensional gradient trench in the broadband visible. Opt. Lett. 45, 5640â5643 (2020).
Liao, K. et al. AI-assisted on-chip nanophotonic convolver based on silicon metasurface. Nanophotonics 9, 3315â3322 (2020).
Fang, Z. R. et al. 1D self-healing beams in integrated silicon photonics. arXiv Prepr. 2103, 12254 (2021).
Neira, A. D. et al. Ultrafast all-optical modulation with hyperbolic metamaterial integrated in Si photonic circuitry. Opt. Express 22, 10987â10994 (2014).
RodrÃguez-Fortuño, F. J., Espinosa-Soria, A. & MartÃnez, A. Exploiting metamaterials, plasmonics and nanoantennas concepts in silicon photonics. J. Opt. 18, 123001 (2016).
Halir, R. et al. Waveguide sub-wavelength structures: a review of principles and applications. Laser Photonics Rev. 9, 25â49 (2015).
Wang, Y. et al. Ultra-compact sub-wavelength grating polarization splitter-rotator for silicon-on-insulator platform. IEEE Photonics J. 8, 7805709 (2016).
González-Andrade, D. et al. Ultra-broadband mode converter and multiplexer based on sub-wavelength structures. IEEE Photonics J. 10, 2201010 (2018).
Xu, H. N., Dai, D. X. & Shi, Y. C. Ultra-broadband and ultra-compact on-chip silicon polarization beam splitter by using hetero-anisotropic metamaterials. Laser Photonics Rev. 13, 1800349 (2019).
Halir, R. et al. Ultra-broadband nanophotonic beamsplitter using an anisotropic sub-wavelength metamaterial. Laser Photonics Rev. 10, 1039â1046 (2016).
Xu, Y. & Xiao, J. B. Ultracompact and high efficient silicon-based polarization splitter-rotator using a partially-etched subwavelength grating coupler. Sci. Rep. 6, 27949 (2016).
Zhang, Y. et al. High-extinction-ratio silicon polarization beam splitter with tolerance to waveguide width and coupling length variations. Opt. Express 24, 6586â6593 (2016).
Guan, X. W. et al. Low-loss ultracompact transverse-magnetic-pass polarizer with a silicon subwavelength grating waveguide. Opt. Lett. 39, 4514â4517 (2014).
Barwicz, T. et al. Integrated metamaterial interfaces for self-aligned fiber-to-chip coupling in volume manufacturing. IEEE J. Sel. Top. Quantum Electron. 25, 4700313 (2019).
Cheben, P. et al. Broadband polarization independent nanophotonic coupler for silicon waveguides with ultra-high efficiency. Opt. Express 23, 22553â22563 (2015).
Xu, H. N., Dai, D. X. & Shi, Y. C. Anisotropic metamaterial-assisted all-silicon polarizer with 415-nm bandwidth. Photonics Res. 7, 1432â1439 (2019).
Levy, U. et al. Inhomogenous dielectric metamaterials with space-variant polarizability. Phys. Rev. Lett. 98, 243901 (2007).
Hassan, K. et al. Integrated photonic guided metalens based on a pseudo-graded index distribution. Sci. Rep. 10, 1123 (2020).
Li, B. R., He, Y. R. & He, S. L. Investigation of light trapping effect in hyperbolic metamaterial slow-light waveguides. Appl. Phys. Express 8, 082601 (2015).
Pendry, J. B. Negative refraction makes a perfect lens. Phys. Rev. Lett. 85, 3966 (2000).
Tichit, P. H., Burokur, S. N. & de Lustrac, A. Waveguide taper engineering using coordinate transformation technology. Opt. Express 18, 767â772 (2010).
Zhang, K. et al. Arbitrary waveguide connector based on embedded optical transformation. Opt. Express 18, 17273â17279 (2010).
Ozgun, O. & Kuzuoglu, M. Utilization of anisotropic metamaterial layers in waveguide miniaturization and transitions. IEEE Microw. Wirel. Compon. Lett. 17, 754â756 (2007).
Viaene, S. et al. Mitigating optical singularities in coordinate-based metamaterial waveguides. Phys. Rev. B 95, 155412 (2017).
Fu, Y. Y., Xu, Y. D. & Chen, H. Y. Additional modes in a waveguide system of zero-index-metamaterials with defects. Sci. Rep. 4, 6428 (2014).
Ding, W. Q. et al. Arbitrary waveguide bends using isotropic and homogeneous metamaterial. Appl. Phys. Lett. 96, 041102 (2010).
Reshef, O. et al. Direct observation of phase-free propagation in a silicon waveguide. ACS Photonics 4, 2385â2389 (2017).
Ji, W. J., Luo, J. & Lai, Y. Extremely anisotropic epsilon-near-zero media in waveguide metamaterials. Opt. Express 27, 19463â19473 (2019).
Edwards, B. et al. Experimental verification of epsilon-near-zero metamaterial coupling and energy squeezing using a microwave waveguide. Phys. Rev. Lett. 100, 033903 (2008).
Zhang, B. et al. THz band-stop filter using metamaterials surfaced on LiNbO3 sub-wavelength slab waveguide. Opt. Express 23, 16042â16051 (2015).
Hamouche, H. & Shabat, M. M. Enhanced absorption in silicon metamaterials waveguide structure. Appl. Phys. A 122, 685 (2016).
Tang, T. T., Li, C. Y. & Luo, L. Enhanced spin hall effect of tunneling light in hyperbolic metamaterial waveguide. Sci. Rep. 6, 30762 (2016).
Xu, Y. D. et al. Broadband asymmetric waveguiding of light without polarization limitations. Nat. Commun. 4, 2561 (2013).
Wang, H. X. et al. Broadband mode conversion via gradient index metamaterials. Sci. Rep. 6, 24529 (2016).
Arute, F. et al. Quantum supremacy using a programmable superconducting processor. Nature 574, 505â510 (2019).
Mirhosseini, M. et al. Superconducting metamaterials for waveguide quantum electrodynamics. Nat. Commun. 9, 3706 (2018).
Rakhmanov, A. L. et al. Quantum metamaterials: electromagnetic waves in a Josephson qubit line. Phys. Rev. B 77, 144507 (2008).
Lodahl, P., Mahmoodian, S. & Stobbe, S. Interfacing single photons and single quantum dots with photonic nanostructures. Rev. Mod. Phys. 87, 347â400 (2015).
Kostovski, G., Stoddart, P. R. & Mitchell, A. The optical fiber tip: An inherently light-coupled microscopic platform for micro- and nanotechnologies. Adv. Mater. 26, 3798â3820 (2014).
Yu, N. F. & Capasso, F. Optical metasurfaces and prospect of their applications including fiber optics. J. Lightwave Technol. 33, 2344â2358 (2015).
Tong, L. M. et al. Optical microfibers and nanofibers: a tutorial. Opt. Commun. 285, 4641â4647 (2012).
Cusano, A. et al. Lab-on-fiber technology (Springer, 2015).
Vaiano, P. et al. Lab on fiber technology for biological sensing applications. Laser Photonics Rev. 10, 922â961 (2016).
Galeotti, F., Pisco, M. & Cusano, A. Self-assembly on optical fibers: a powerful nanofabrication tool for next generation âlab-on-fiberâ optrodes. Nanoscale 10, 22673â22700 (2018).
Pisco, M. & Cusano, A. Lab-on-fiber technology: a roadmap toward multifunctional plug and play platforms. Sensors 20, 4705 (2020).
Plidschun, M. et al. Ultrahigh numerical aperture meta-fibre for flexible optical trapping. Light.: Sci. Appl. 10, 57 (2021).
Liu, Y. X. et al. Compact microfiber Bragg gratings with high-index contrast. Opt. Lett. 36, 3115â3117 (2011).
Ding, M., Zervas, M. N. & Brambilla, G. A compact broadband microfiber Bragg grating. Opt. Express 19, 15621â15626 (2011).
Petersen, J., Volz, J. & Rauschenbeutel, A. Chiral nanophotonic waveguide interface based on spin-orbit interaction of light. Science 346, 67â71 (2014).
Liu, T. M. et al. Polarization conversion based on an all-dielectric metasurface for optical fiber applications. J. Phys. D: Appl. Phys. 50, 334001 (2017).
Smith, E. J. et al. Combined surface Plasmon and classical waveguiding through metamaterial fiber design. Nano Lett. 10, 1â5 (2010).
Hasan, M. M. et al. Robust optical fiber using single negative metamaterial cladding. IEEE Photonics Technol. Lett. 25, 1043â1046 (2013).
Zeisberger, M., Tuniz, A. & Schmidt, M. A. Analytic model for the complex effective index dispersion of metamaterial-cladding large-area hollow core fibers. Opt. Express 24, 20515â20528 (2016).
Li, H. S. et al. Flexible single-mode hollow-core terahertz fiber with metamaterial cladding. Optica 3, 941â947 (2016).
Lai, C. C. et al. Architecting a nonlinear hybrid crystal-glass metamaterial fiber for all-optical photonic integration. J. Mater. Chem. C. 6, 1659â1669 (2018).
Minn, K. et al. Excitation of epsilon-near-zero resonance in ultra-thin indium tin oxide shell embedded nanostructured optical fiber. Sci. Rep. 8, 2342 (2018).
Tuniz, A. et al. Metamaterial fibres for subdiffraction imaging and focusing at terahertz frequencies over optically long distances. Nat. Commun. 4, 2706 (2013).
Hayashi, J. G. et al. Fabrication of soft-glass-based wire array metamaterial fibers for applications at infrared frequencies. J. Lightwave Technol. 37, 5001â5009 (2019).
Chan, E. A. et al. Plasmono-atomic interactions on a fiber tip. Appl. Phys. Lett. 116, 183101 (2020).
Principe, M. et al. Evaluation of fiber-optic phase-gradient meta-tips for sensing applications. Nanomaterials Nanotechnol. 9, 1â9 (2019).
Dhawan, A., Gerhold, M. D. & Muth, J. F. Plasmonic structures based on subwavelength apertures for chemical and biological sensing applications. IEEE Sens. J. 8, 942â950 (2008).
Lin, Y. B., Guo, J. P. & Lindquist, R. G. Demonstration of an ultra-wideband optical fiber inline polarizer with metal nano-grid on the fiber tip. Opt. Express 17, 17849â17854 (2009).
Arce, C. L. et al. Silicon-on-insulator microring resonator sensor integrated on an optical fiber facet. IEEE Photonics Technol. Lett. 23, 890â892 (2011).
Lin, Y. B., Zou, Y. & Lindquist, R. G. A reflection-based localized surface plasmon resonance fiber-optic probe for biochemical sensing. Biomed. Opt. Express 2, 478â484 (2011).
Kim, H. T. & Yu, M. Lab-on-fiber nanoprobe with dual high-Q Rayleigh anomaly-surface Plasmon Polariton resonances for multiparameter sensing. Sci. Rep. 9, 1922 (2019).
Jeong, H. H. et al. Real-time label-free immunoassay of interferon-gamma and prostate-specific antigen using a Fiber-Optic Localized Surface Plasmon Resonance sensor. Biosens. Bioelectron. 39, 346â351 (2013).
Kang, S. H. et al. Subwavelength plasmonic lens patterned on a composite optical fiber facet for quasi-one-dimensional Bessel beam generation. Appl. Phys. Lett. 98, 241103 (2011).
Zhao, Y. F. et al. Meta-facet fiber for twisting ultra-broadband light with high phase purity. Appl. Phys. Lett. 113, 061103 (2018).
Wang, X. et al. Metasurface-on-fiber enabled orbital angular momentum modes in conventional optical fibers. In Proceedings of 2014 Conference on Lasers and Electro-Optics (CLEO) - Laser Science to Photonic Applications (IEEE, 2014).
Du, J. et al. Design and fabrication of metasurface on conventional optical fiber facet for linearly polarized mode (LP11) generation at visible light wavelength. In Proceedings of 2016 Conference on Lasers and Electro-Optics (IEEE, 2016).
Rauch, J. Y. et al. Smallest microhouse in the world, assembled on the facet of an optical fiber by origami and welded in the µrobotex nanofactory. J. Vac. Sci. Technol. A 36, 041601 (2018).
Kou, J. L. et al. Demonstration of a compact temperature sensor based on first-order Bragg grating in a tapered fiber probe. Opt. Express 19, 18452â18457 (2011).
Feng, J. et al. An optical fiber tip micrograting thermometer. IEEE Photonics J. 3, 810â814 (2011).
Nayak, K. P. et al. Cavity formation on an optical nanofiber using focused ion beam milling technique. Opt. Express 19, 14040â14050 (2011).
Nguyen-Dang, T. et al. Controlled sub-micrometer hierarchical textures engineered in polymeric fibers and microchannels via thermal drawing. Adv. Funct. Mater. 27, 1605935 (2017).
Mu, J. et al. Sheath-run artificial muscles. Science 365, 150â155 (2019).
Wang, Z. et al. Designer patterned functional fibers via direct imprinting in thermal drawing. Nat. Commun. 11, 3842 (2020).
Abouraddy, A. F. et al. Towards multimaterial multifunctional fibres that see, hear, sense and communicate. Nat. Mater. 6, 336â347 (2007).
Xue, S. C. et al. Analysis of capillary instability in metamaterials fabrication using fiber drawing technology. J. Lightwave Technol. 35, 2167â2174 (2017).
Loke, G. et al. Recent progress and perspectives of thermally drawn multimaterial fiber electronics. Adv. Mater. 32, 1904911 (2020).
Fleming, S. et al. Tunable metamaterials fabricated by fiber drawing. J. Optical Soc. Am. B 34, D81âD85 (2017).
Wang, A. N. et al. Fiber metamaterials with negative magnetic permeability in the terahertz. Optical Mater. Express 1, 115â120 (2011).
Yan, M. & Mortensen, N. A. Hollow-core infrared fiber incorporating metal-wire metamaterial. Opt. Express 17, 14851â14864 (2009).
Skorobogatiy, M. & Dupuis, A. Ferroelectric all-polymer hollow Bragg fibers for terahertz guidance. Appl. Phys. Lett. 90, 113514 (2007).
Pratap, D. et al. Anisotropic metamaterial optical fibers. Opt. Express 23, 9074â9085 (2015).
Townsend, S., Zhou, S. W. & Li, Q. Design of fiber metamaterials with negative refractive index in the infrared. Opt. Express 23, 18236â18242 (2015).
Hassani, A., Dupuis, A. & Skorobogatiy, M. Low loss porous terahertz fibers containing multiple subwavelength holes. Appl. Phys. Lett. 92, 071101 (2008).
Atakaramians, S. et al. Fiber-drawn metamaterial for THz waveguiding and imaging. J. Infrared Millim. Terahertz Waves 38, 1162â1178 (2017).
Bhardwaj, A., Srivastava, K. V. & Ramakrishna, S. A. Enhanced coupling of light from subwavelength sources into a hyperbolic metamaterial fiber. J. Lightwave Technol. 37, 3064â3072 (2019).
Atakaramians, S. et al. Hollow-core uniaxial metamaterial clad fibers with dispersive metamaterials. J. Optical Soc. Am. B 30, 851â867 (2013).
Sakr, H. et al. Hollow core optical fibres with comparable attenuation to silica fibres between 600 and 1100 nm. Nat. Commun. 11, 6030 (2020).
Yang, Y. M. et al. High-harmonic generation from an epsilon-near-zero material. Nat. Phys. 15, 1022â1026 (2019).
Hayashi, J. G. et al. Towards subdiffraction imaging with wire array metamaterial hyperlenses at MIR frequencies. Opt. Express 27, 21420â21434 (2019).
Kanamori, Y., Okochi, M. & Hane, K. Fabrication of antireflection subwavelength gratings at the tips of optical fibers using UV nanoimprint lithography. Opt. Express 21, 322â328 (2013).
Calafiore, G. et al. Campanile near-field probes fabricated by nanoimprint lithography on the facet of an optical fiber. Sci. Rep. 7, 1651 (2017).
Yang, X. et al. Nanopillar array on a fiber facet for highly sensitive surface-enhanced Raman scattering. Opt. Express 20, 24819â24826 (2012).
Petrušis, A. et al. The align-and-shine technique for series production of photolithography patterns on optical fibres. J. Micromech. Microeng. 19, 047001 (2009).
Zhou, C. et al. All-dielectric fiber meta-tip enabling vortex generation and beam collimation for optical interconnect. Laser Photonics Rev. 15, 2000581 (2021).
Reader-Harris, P. & Falco, A. D. Nanoplasmonic filters for hollow core photonic crystal fibers. ACS Photonics 1, 985â989 (2014).
Juhl, M., Mueller, J. P. B. & Leosson, K. Metasurface polarimeter on optical fiber facet by nano-transfer to UV-curable hybrid polymer. IEEE J. Sel. Top. Quantum Electron. 25, 4500107 (2019).
Yu, J. et al. All-fiber focused beam generator integrated on an optical fiber tip. Appl. Phys. Lett. 116, 241102 (2020).
Kostovski, G. et al. Sub-15 nm optical fiber nanoimprint lithography: a parallel, self-aligned and portable approach. Adv. Mater. 23, 531â535 (2011).
Vanmol, K. et al. 3D direct laser writing of microstructured optical fiber tapers on single-mode fibers for mode-field conversion. Opt. Express 28, 36147â36158 (2020).
Xie, Z. W. et al. Integrated (de)multiplexer for orbital angular momentum fiber communication. Photonics Res. 6, 743â749 (2018).
Kostovski, G. et al. Nanoimprinted optical fibres: biotemplated nanostructures for SERS sensing. Biosens. Bioelectron. 24, 1531â1535 (2009).
Lipomi, D. J. et al. Patterning the tips of optical fibers with metallic nanostructures using nanoskiving. Nano Lett. 11, 632â636 (2011).
Smythe, E. J. et al. A technique to transfer metallic nanoscale patterns to small and non-planar surfaces. ACS Nano 3, 59â65 (2009).
Smythe, E. J. et al. Optical antenna arrays on a fiber facet for in situ surface-enhanced Raman scattering detection. Nano Lett. 9, 1132â1138 (2009).
Shambat, G. et al. Optical fiber tips functionalized with semiconductor photonic crystal cavities. Appl. Phys. Lett. 99, 191102 (2011).
Wang, B. W. et al. Photonic crystal cavity on optical fiber facet for refractive index sensing. Opt. Lett. 37, 833â835 (2012).
Jia, P. P. & Yang, J. Integration of large-area metallic nanohole arrays with multimode optical fibers for surface plasmon resonance sensing. Appl. Phys. Lett. 102, 243107 (2013).
Jia, P. P. & Yang, J. A plasmonic optical fiber patterned by template transfer as a high-performance flexible nanoprobe for real-time biosensing. Nanoscale 6, 8836â8843 (2014).
Kawata, S. et al. Finer features for functional microdevices. Nature 412, 697â698 (2001).
Ma, Z. C. et al. Femtosecond laser programmed artificial musculoskeletal systems. Nat. Commun. 11, 4536 (2020).
Saha, S. K. et al. Scalable submicrometer additive manufacturing. Science 366, 105â109 (2019).
Gissibl, T. et al. Two-photon direct laser writing of ultracompact multi-lens objectives. Nat. Photonics 10, 554â560 (2016).
Weber, K. et al. Single mode fiber based delivery of OAM light by 3D direct laser writing. Opt. Express 25, 19672â19679 (2017).
Thompson, A. J., Power, M. & Yang, G. Z. Micro-scale fiber-optic force sensor fabricated using direct laser writing and calibrated using machine learning. Opt. Express 26, 14186â14200 (2018).
Rechtsman, M. C. et al. Photonic Floquet topological insulators. Nature 496, 196â200 (2013).
Chen, Y. et al. Vector vortex beam emitter embedded in a photonic chip. Phys. Rev. Lett. 124, 153601 (2020).
Scheerlinck, S. et al. Flexible metal grating based optical fiber probe for photonic integrated circuits. Appl. Phys. Lett. 92, 031104 (2008).
Calafiore, G. et al. Nanoimprint of a 3D structure on an optical fiber for light wavefront manipulation. Nanotechnology 27, 375301 (2016).
Morales-Delgado, E. E. et al. Three-dimensional microfabrication through a multimode optical fiber. Opt. Express 25, 7031â7045 (2017).
Consales, M. et al. Lab-on-fiber technology: toward multifunctional optical nanoprobes. ACS Nano 6, 3163â3170 (2012).
Lin, Y. B. et al. E-beam patterned gold nanodot arrays on optical fiber tips for localized surface plasmon resonance biochemical sensing. Sensors 10, 9397â9406 (2010).
Sasaki, M. et al. Direct photolithography on optical fiber end. Japanese J. Appl. Phys. 41, 4350â4355 (2002).
Lu, Y. et al. Three-dimensional photolithography technology for a fiber substrate using a microfabricated exposure module. J. Micromech. Microeng. 20, 125013 (2010).
Lee, Y. et al. Selectively micro-patternable fibers via in-fiber photolithography. ACS Cent. Sci. 6, 2319â2325 (2020).
Yan, W. et al. Advanced multimaterial electronic and optoelectronic fibers and textiles. Adv. Mater. 31, 1802348 (2019).
Alchalaby, A. et al. Investigation of plateau-Rayleigh instability in drawn metal-polymer composite fibers for metamaterials fabrication. J. Lightwave Technol. 34, 2198â2205 (2016).
Yaman, M. et al. Arrays of indefinitely long uniform nanowires and nanotubes. Nat. Mater. 10, 494â501 (2011).
Yan, W. et al. Structured nanoscale metallic glass fibres with extreme aspect ratios. Nat. Nanotechnol. 15, 875â882 (2020).
Danckwerts, M. & Novotny, L. Optical frequency mixing at coupled gold nanoparticles. Phys. Rev. Lett. 98, 026104 (2007).
Maier, S. A. Plasmonics: the promise of highly integrated optical devices. IEEE J. Sel. Top. Quantum Electron. 12, 1671â1677 (2006).
Ebbesen, T. W., Genet, C. & Bozhevolnyi, S. I. Surface-plasmon circuitry. Phys. Today 61, 44â50 (2008).
Fang, Y. R. & Sun, M. T. Nanoplasmonic waveguides: Towards applications in integrated nanophotonic circuits. Light.: Sci. Appl. 4, e294 (2015).
Anker, J. N. et al. Biosensing with plasmonic nanosensors. In Nanoscience and Technology (ed. Rodgers, P.) 308â319 (World Scientific, 2009).
Kneipp, K. et al. Single molecule detection using surface-enhanced Raman scattering (SERS). Phys. Rev. Lett. 78, 1667â1670 (1997).
Pendry, J. B. Mimicking surface plasmons with structured surfaces. Science 305, 847â848 (2004).
Maier, S. A. et al. Terahertz surface plasmon-polariton propagation and focusing on periodically corrugated metal wires. Phys. Rev. Lett. 97, 176805 (2006).
Zayats, A. V., Smolyaninov, I. I. & Maradudin, A. A. Nano-optics of surface plasmon polaritons. Phys. Rep. 408, 131â314 (2005).
Raether, H. Surface Plasmons on Smooth and Rough Surfaces and on Gratings (Springer, 1988).
Zia, R. et al. Plasmonics: the next chip-scale technology. Mater. Today 9, 20â27 (2006).
Wang, J. F. et al. High-efficiency spoof plasmon polariton coupler mediated by gradient metasurfaces. Appl. Phys. Lett. 101, 201104 (2012).
Duan, J. W. et al. High-efficiency chirality-modulated spoof surface plasmon meta-coupler. Sci. Rep. 7, 1354 (2017).
Yin, L. Z. et al. High-efficiency terahertz spin-decoupled meta-coupler for spoof surface plasmon excitation and beam steering. Opt. Express 27, 18928â18939 (2019).
Tanemura, T. et al. Multiple-wavelength focusing of surface plasmons with a nonperiodic nanoslit coupler. Nano Lett. 11, 2693â2698 (2011).
Xu, Q. et al. Polarization-controlled surface plasmon holography. Laser Photonics Rev. 11, 1600212 (2017).
Zhang, X. Q. et al. Anomalous surface wave launching by handedness phase control. Adv. Mater. 27, 7123â7129 (2015).
Bozhevolnyi, S. I. et al. Channel plasmon subwavelength waveguide components including interferometers and ring resonators. Nature 440, 508â511 (2006).
Oulton, R. F. et al. A hybrid plasmonic waveguide for subwavelength confinement and long-range propagation. Nat. Photonics 2, 496â500 (2008).
Stockman, M. I. Nanofocusing of optical energy in tapered plasmonic waveguides. Phys. Rev. Lett. 93, 137404 (2004).
Zhang, Y. et al. Terahertz spoof surface-plasmon-polariton subwavelength waveguide. Photonics Res. 6, 18â23 (2018).
Kumar, G. et al. Terahertz surface plasmon waveguide based on a one-dimensional array of silicon pillars. N. J. Phys. 15, 085031 (2013).
Shen, X. P. et al. Conformal surface plasmons propagating on ultrathin and flexible films. Proc. Natl Acad. Sci. USA 110, 40â45 (2013).
Wei, H. et al. Quantum dot-based local field imaging reveals plasmon-based interferometric logic in silver nanowire networks. Nano Lett. 11, 471â475 (2011).
Wei, H. et al. Cascaded logic gates in nanophotonic plasmon networks. Nat. Commun. 2, 387 (2011).
Fu, Y. L. et al. All-optical logic gates based on nanoscale plasmonic slot waveguides. Nano Lett. 12, 5784â5790 (2012).
Li, Y. et al. Transversely divergent second harmonic generation by surface plasmon polaritons on single metallic nanowires. Nano Lett. 17, 7803â7808 (2017).
Shi, J. J. et al. Efficient second harmonic generation in a hybrid plasmonic waveguide by mode interactions. Nano Lett. 19, 3838â3845 (2019).
Lu, F. F. et al. Efficient second-harmonic generation in nonlinear plasmonic waveguide. Opt. Lett. 36, 3371â3373 (2011).
Guo, Q. B. et al. Routing a chiral Raman signal based on spin-orbit interaction of light. Phys. Rev. Lett. 123, 183903 (2019).
Hohenau, A. et al. Dielectric optical elements for surface plasmons. Opt. Lett. 30, 893â895 (2005).
Ditlbacher, H. et al. Two-dimensional optics with surface Plasmon polaritons. Appl. Phys. Lett. 81, 1762â1764 (2002).
Li, L. et al. Plasmonic airy beam generated by in-plane diffraction. Phys. Rev. Lett. 107, 126804 (2011).
Zhao, C. L. et al. A reconfigurable plasmofluidic lens. Nat. Commun. 4, 2305 (2013).
Zentgraf, T. et al. Plasmonic Luneburg and Eaton lenses. Nat. Nanotechnol. 6, 151â155 (2011).
Chen, Y. G., Chen, Y. H. & Li, Z. Y. Direct method to control surface plasmon polaritons on metal surfaces. Opt. Lett. 39, 339â342 (2014).
Chen, Y. G., Wang, Y. H. & Li, Z. Y. Complicated wavefront shaping of surface Plasmon polaritons on metal surface by holographic groove patterns. Plasmonics 9, 1057â1062 (2014).
Dong, S. H. et al. Dielectric meta-walls for surface plasmon focusing and Bessel beam generation. Europhys. Lett. 122, 67002 (2018).
Guan, F. X. et al. Scatterings from surface plasmons to propagating waves at plasmonic discontinuities. Sci. Bull. 64, 802â807 (2019).
Lezec, H. J. et al. Beaming light from a subwavelength aperture. Science 297, 820â822 (2002).
Dolev, I., Epstein, I. & Arie, A. Surface-plasmon holographic beam shaping. Phys. Rev. Lett. 109, 203903 (2012).
Tang, X. M. et al. Converting surface plasmon to spatial airy beam by graded grating on metal surface. Opt. Lett. 38, 1733â1735 (2013).
Baron, A. et al. Compact antenna for efficient and unidirectional launching and decoupling of surface plasmons. Nano Lett. 11, 4207â4212 (2011).
Li, L. et al. Plasmonic polarization generator in well-routed beaming. Light.: Sci. Appl. 4, e330 (2015).
Hughes, T. W. et al. Adjoint method and inverse design for nonlinear nanophotonic devices. ACS Photonics 5, 4781â4787 (2018).
Lalau-Keraly, C. M. et al. Adjoint shape optimization applied to electromagnetic design. Opt. Express 21, 21693â21701 (2013).
Piggott, A. Y. et al. Inverse design and demonstration of a compact and broadband on-chip wavelength demultiplexer. Nat. Photonics 9, 374â377 (2015).
Johnson, S. G. et al. Perturbation theory for Maxwellâs equations with shifting material boundaries. Phys. Rev. E 65, 066611 (2002).
Lu, L. L. Z. et al. Inverse-designed single-step-etched colorless 3 dB couplers based on RIE-lag-insensitive PhC-like subwavelength structures. Opt. Lett. 41, 5051â5054 (2016).
Bendsoe, M. P. & Sigmund, O. Topology Optimization: Theory, Methods, and Applications (Springer, 2013).
Haslinger, J. & Mäkinen, R. A. E. Introduction to Shape Optimization: Theory, Approximation, and Computation (SIAM, 2003).
Borel, P. I. et al. Topology optimization and fabrication of photonic crystal structures. Opt. Express 12, 1996â2001 (2004).
Jensen, J. S. & Sigmund, O. Systematic design of photonic crystal structures using topology optimization: low-loss waveguide bends. Appl. Phys. Lett. 84, 2022â2024 (2004).
Tsuji, Y. & Hirayama, K. Design of optical circuit devices using topology optimization method with function-expansion-based refractive index distribution. IEEE Photonics Technol. Lett. 20, 982â984 (2008).
Frandsen, L. H. & Sigmund, O. Inverse design engineering of all-silicon polarization beam splitters. In Proceedings of SPIE 9756, Photonic and Phononic Properties of Engineered Nanostructures VI (SPIE, 2016).
Frellsen, L. F. et al. Topology optimized mode multiplexing in silicon-on-insulator photonic wire waveguides. Opt. Express 24, 16866â16873 (2016).
Augenstein, Y. & Rockstuhl, C. Inverse design of nanophotonic devices with structural integrity. ACS Photonics 7, 2190â2196 (2020).
Sell, D. et al. Large-angle, multifunctional metagratings based on freeform multimode geometries. Nano Lett. 17, 3752â3757 (2017).
Sell, D. et al. Ultra-high-efficiency anomalous refraction with dielectric metasurfaces. ACS Photonics 5, 2402â2407 (2018).
Phan, T. et al. High-efficiency, large-area, topology-optimized metasurfaces. Light.: Sci. Appl. 8, 48 (2019).
Sell, D. et al. Periodic dielectric metasurfaces with high-efficiency, multiwavelength functionalities. Adv. Optical Mater. 5, 1700645 (2017).
Shi, Z. J. et al. Continuous angle-tunable birefringence with freeform metasurfaces for arbitrary polarization conversion. Sci. Adv. 6, eaba3367 (2020).
Yang, J. J., Sell, D. & Fan, J. A. Freeform metagratings based on complex light scattering dynamics for extreme, high efficiency beam steering. Ann. Der Phys. 530, 1700302 (2018).
Lu, J. & VuÄkoviÄ, J. Objective-first design of high-efficiency, small-footprint couplers between arbitrary nanophotonic waveguide modes. Opt. Express 20, 7221â7236 (2012).
Huang, J. et al. Ultra-compact broadband polarization beam splitter with strong expansibility. Photonics Res. 6, 574â578 (2018).
Huang, J. et al. Implementation of on-chip multi-channel focusing wavelength demultiplexer with regularized digital metamaterials. Nanophotonics 9, 159â166 (2019).
Lin, Z., LonÄar, M. & Rodriguez, A. W. Topology optimization of multi-track ring resonators and 2D microcavities for nonlinear frequency conversion. Opt. Lett. 42, 2818â2821 (2017).
Veronis, G., Dutton, R. W. & Fan, S. H. Method for sensitivity analysis of photonic crystal devices. Opt. Lett. 29, 2288â2290 (2004).
Kao, C. Y., Osher, S. & Yablonovitch, E. Maximizing band gaps in two-dimensional photonic crystals by using level set methods. Appl. Phys. B 81, 235â244 (2005).
Piggott, A. Y. et al. Fabrication-constrained nanophotonic inverse design. Sci. Rep. 7, 1786 (2017).
Skarda, J. et al. Inverse designed cavity-waveguide couplers. In Proceedings of 2019 Conference on Lasers and Electro-Optics (IEEE, 2019).
Sitawarin, C. et al. Inverse-designed photonic fibers and metasurfaces for nonlinear frequency conversion [Invited]. Photonics Res. 6, B82âB89 (2018).
Sapra, N. V. et al. Inverse design and demonstration of broadband grating couplers. IEEE J. Sel. Top. Quantum Electron. 25, 6100207 (2019).
Skarda, J. et al. Toward inverse-designed optical interconnect. In Proceedings of 2020 IEEE Photonics Conference (IEEE, 2020).
Ahn, G. H. et al. Inverse design of microresonator dispersion for nonlinear optics. In Proceedings of 2020 Conference on Lasers and Electro-Optics (IEEE, 2020).
Yang, K. Y. et al. Inverse-designed non-reciprocal pulse router for chip-based LiDAR. Nat. Photonics 14, 369â374 (2020).
Sapra, N. V. et al. On-chip integrated laser-driven particle accelerator. Science 367, 79â83 (2020).
Dory, C. et al. Inverse-designed diamond photonics. Nat. Commun. 10, 3309 (2019).
Bruns, T. E. & Tortorelli, D. A. Topology optimization of non-linear elastic structures and compliant mechanisms. Computer Methods Appl. Mech. Eng. 190, 3443â3459 (2001).
Sigmund, O. On the design of compliant mechanisms using topology optimization. Mech. Struct. Mach. 25, 493â524 (1997).
Bendsøe, M. P. & Soares, C. A. M. Topology Design of Structures (Kluwer Academic Publishers, 1993).
Jensen, J. S. & Sigmund, O. Topology optimization of photonic crystal structures: a high-bandwidth low-loss T-junction waveguide. J. Optical Soc. Am. B 22, 1191â1198 (2005).
Chakrabarti, A. Learning sensor multiplexing design through back-propagation. In Proceedings of the 30th International Conference on Neural Information Processing Systems 3089â3097 (Curran Associates Inc., 2016).
Frei, W. R., Tortorelli, D. A. & Johnson, H. T. Geometry projection method for optimizing photonic nanostructures. Opt. Lett. 32, 77â79 (2007).
Zhou, M. D. et al. Minimum length scale in topology optimization by geometric constraints. Computer Methods Appl. Mech. Eng. 293, 266â282 (2015).
Chen, M. K., Jiang, J. Q. & Fan, J. A. Design space reparameterization enforces hard geometric constraints in inverse-designed nanophotonic devices. ACS Photonics 7, 3141â3151 (2020).
Seldowitz, M. A., Allebach, J. P. & Sweeney, D. W. Synthesis of digital holograms by direct binary search. Appl. Opt. 26, 2788â2798 (1987).
Xu, K. et al. Integrated photonic power divider with arbitrary power ratios. Opt. Lett. 42, 855â858 (2017).
Augenstein, Y. et al. Inverse photonic design of functional elements that focus Bloch surface waves. Light.: Sci. Appl. 7, 104 (2018).
Jia, H. et al. Mode-oriented permutation cipher encryption and passive signal switching based on multiobjective optimized silicon subwavelength metastructures. ACS Photonics 7, 2163â2172 (2020).
Majumder, A. et al. Programmable metamaterials & metasurfaces for ultra-compact multi-functional photonics. In Proceedings of 2019 Conference on Lasers and Electro-Optics (IEEE, 2019).
Liu, Y. J. et al. Subwavelength polarization splitterârotator with ultra-compact footprint. Opt. Lett. 44, 4495â4498 (2019).
Abrokwah, K. O. Characterization and modeling of plasma etch pattern dependencies in integrated circuits. PhD thesis, Massachusetts Institute of Technology, Cambridge, Massachusetts, (2006).
Chang, W. J. et al. Ultra-compact mode (de) multiplexer based on subwavelength asymmetric Y-junction. Opt. Express 26, 8162â8170 (2018).
Lu, L. L. Z. et al. Inverse-designed ultra-compact star-crossings based on PhC-like subwavelength structures for optical intercross connect. Opt. Express 25, 18355â18364 (2017).
Zhou, F. Y. et al. Ultra-compact, low-loss and low-crosstalk wavelength demultiplexer for CWDM system based on the photonic-crystal-like metamaterial structure. In Proceedings of 2017 Conference on Lasers and Electro-Optics (IEEE, 2017).
Chang, W. J. et al. Inverse design of a single-step-etched ultracompact silicon polarization rotator. Opt. Express 28, 28343â28351 (2020).
Chang, W. J. et al. Ultra-compact silicon multi-mode waveguide bend based on subwavelength asymmetric Y-junction. In Proceedings of 2018 Optical Fiber Communications Conference and Exposition (IEEE, 2018).
Chang, W. J. et al. Ultracompact dual-mode waveguide crossing based on subwavelength multimode-interference couplers. Photonics Res. 6, 660â665 (2018).
Chang, W. J. et al. Inverse design and demonstration of an ultracompact broadband dual-mode 3 dB power splitter. Opt. Express 26, 24135â24144 (2018).
Ma, H. S. et al. Ultra-compact and efficient 1 Ã 2 mode converters based on rotatable direct-binary-search algorithm. Opt. Express 28, 17010â17019 (2020).
Spuhler, M. M. et al. A very short planar silica spot-size converter using a nonperiodic segmented waveguide. J. Lightwave Technol. 16, 1680â1685 (1998).
Gondarenko, A. & Lipson, M. Low modal volume dipole-like dielectric slab resonator. Opt. Express 16, 17689â17694 (2008).
Yu, Z. J., Cui, H. R. & Sun, X. K. Genetically optimized on-chip wideband ultracompact reflectors and Fabry-Perot cavities. Photonics Res. 5, B15âB19 (2017).
Xu, P. F. et al. Scaling and cascading compact metamaterial photonic waveguide filter blocks. Opt. Lett. 45, 4072â4075 (2020).
Liu, Z. H. et al. Integrated nanophotonic wavelength router based on an intelligent algorithm. Optica 6, 1367â1373 (2019).
Bruck, R. et al. All-optical spatial light modulator for reconfigurable silicon photonic circuits. Optica 3, 396â402 (2016).
Mak, J. C. C. et al. Binary particle swarm optimized 2 Ã 2 power splitters in a standard foundry silicon photonic platform. Opt. Lett. 41, 3868â3871 (2016).
Lu, Q. C. et al. Particle swarm optimized ultra-compact polarization beam splitter on silicon-on-insulator. Photonics Nanostruct. - Fundamentals Appl. 32, 19â23 (2018).
Kennedy, J. & Eberhart, R. C. A discrete binary version of the particle swarm algorithm. In Proceedings of 1997 IEEE International Conference on Systems, Man, and Cybernetics. Computational Cybernetics and Simulation, 4104â4108 (IEEE, 1997).
Jiang, J. Q., Chen, M. K. & Fan, J. A. Deep neural networks for the evaluation and design of photonic devices. Nat. Rev. Mater. 6, 679â700 (2021).
Wiecha, P. R. et al. Deep learning in nano-photonics: inverse design and beyond. Photonics Res. 9, B182âB200 (2021).
Metanet - Stanford. at http://metanet.stanford.edu/code/.
So, S. et al. Deep learning enabled inverse design in nanophotonics. Nanophotonics 9, 1041â1057 (2020).
Hegde, R. S. Accelerating optics design optimizations with deep learning. Optical Eng. 58, 065103 (2019).
Ho, S. L. & Yang, S. Y. The cross-entropy method and its application to inverse problems. IEEE Trans. Magn. 46, 3401â3404 (2010).
Gostimirovic, D. & Ye, W. N. An open-source artificial neural network model for polarization-insensitive silicon-on-insulator subwavelength grating couplers. IEEE J. Sel. Top. Quantum Electron. 25, 8200205 (2019).
Nadell, C. C. et al. Deep learning for accelerated all-dielectric metasurface design. Opt. Express 27, 27523â27535 (2019).
Liu, D. J. et al. Training deep neural networks for the inverse design of nanophotonic structures. ACS Photonics 5, 1365â1369 (2018).
Gao, L. et al. A bidirectional deep neural network for accurate silicon color design. Adv. Mater. 31, 1905467 (2019).
Long, Y. et al. Inverse design of photonic topological state via machine learning. Appl. Phys. Lett. 114, 181105 (2019).
Peurifoy, J. et al. Nanophotonic particle simulation and inverse design using artificial neural networks. Sci. Adv. 4, eaar4206 (2018).
Asano, T. & Noda, S. Optimization of photonic crystal nanocavities based on deep learning. Opt. Express 26, 32704â32717 (2018).
Zhelyeznyakov, M. V., Brunton, S. & Majumdar, A. Deep learning to accelerate scatterer-to-field mapping for inverse design of dielectric metasurfaces. ACS Photonics 8, 481â488 (2021).
Ren, S. M., Padilla, W. & Malof, J. Benchmarking deep inverse models over time, and the neural-adjoint method. arXiv Prepr. 2009, 12919 (2021).
Deng, Y. et al. Neural-adjoint method for the inverse design of all-dielectric metasurfaces. Opt. Express 29, 7526â7534 (2021).
Liu, Z. C. et al. Generative model for the inverse design of metasurfaces. Nano Lett. 18, 6570â6576 (2018).
Jiang, J. Q. et al. Free-form diffractive metagrating design based on generative adversarial networks. ACS Nano 13, 8872â8878 (2019).
Wen, F. F., Jiang, J. Q. & Fan, J. A. Robust freeform metasurface design based on progressively growing generative networks. ACS Photonics 7, 2098â2104 (2020).
Dinsdale, N. J. et al. Deep learning enabled design of complex transmission matrices for universal optical components. ACS Photonics 8, 283â295 (2021).
Jiang, J. & Fan, J. A. Global optimization of dielectric metasurfaces using a physics-driven neural network. Nano Lett. 19, 5366â5372 (2019).
Jiang, J. Q. & Fan, J. A. Multiobjective and categorical global optimization of photonic structures based on ResNet generative neural networks. Nanophotonics 10, 361â369 (2020).
Sajedian, I., Badloe, T. & Rho, J. Optimisation of colour generation from dielectric nanostructures using reinforcement learning. Opt. Express 27, 5874â5883 (2019).
Wang, H. Z. et al. Automated multi-layer optical design via deep reinforcement learning. Mach. Learn.: Sci. Technol. 2, 025013 (2021).
Badloe, T., Kim, I. & Rho, J. Biomimetic ultra-broadband perfect absorbers optimised with reinforcement learning. Phys. Chem. Chem. Phys. 22, 2337â2342 (2020).
Sajedian, I., Lee, H. & Rho, J. Double-deep Q-learning to increase the efficiency of metasurface holograms. Sci. Rep. 9, 10899 (2019).
Angeris, G., VuÄkoviÄ, J. & Boyd, S. P. Computational bounds for photonic design. ACS Photonics 6, 1232â1239 (2019).
Kuang, Z. Y. & Miller, O. D. Computational bounds to light-matter interactions via local conservation laws. Phys. Rev. Lett. 125, 263607 (2020).
Angeris, G., VuÄkoviÄ, J. & Boyd, S. Heuristic methods and performance bounds for photonic design. Opt. Express 29, 2827â2854 (2021).
Vercruysse, D. et al. Level-set fabrication constraints for gradient-based optimization of optical devices. Proceedings of 2018 Conference on Lasers and Electro-Optics. San Jose: IEEE, 2018.
Men, H. et al. Robust topology optimization of three-dimensional photonic-crystal band-gap structures. Opt. Express 22, 22632â22648 (2014).
Sigmund, O., Jensen, J. S. & Frandsen, L. H. On nanostructured silicon success. Nat. Photonics 10, 142â143 (2016).
Kojima, K. et al. Acceleration of FDTD-based inverse design using a neural network approach. In Proceedings of the Integrated Photonics Research, Silicon and Nanophotonics 2017 (Optical Society of America, 2017).
Teng, M. et al. Broadband SOI mode order converter based on topology optimization. In Proceedings of the Optical Fiber Communications Conference and Exposition (IEEE, 2018).
Li, Y. et al. Waveguide metatronics: lumped circuitry based on structural dispersion. Sci. Adv. 2, e1501790 (2016).
Akinwande, D. et al. Graphene and two-dimensional materials for silicon technology. Nature 573, 507â518 (2019).
Meng, Y. et al. Waveguide engineering of graphene optoelectronicsâmodulators and polarizers. IEEE Photonics J. 10, 6600217 (2018).
Wang, C. et al. Integrated lithium niobate electro-optic modulators operating at CMOS-compatible voltages. Nature 562, 101â104 (2018).
Qi, Y. F. & Li, Y. Integrated lithium niobate photonics. Nanophotonics 9, 1287â1320 (2020).
Yao, Y. et al. Electrically tunable metasurface perfect absorbers for ultrathin mid-infrared optical modulators. Nano Lett. 14, 6526â6532 (2014).
Sun, J. et al. Large-scale nanophotonic phased array. Nature 493, 195â199 (2013).
Zheludev, N. I. & Plum, E. Reconfigurable nanomechanical photonic metamaterials. Nat. Nanotechnol. 11, 16â22 (2016).
Nambiar, S. et al. High efficiency DBR assisted grating chirp generators for silicon nitride fiber-chip coupling. Sci. Rep. 9, 18821 (2019).
Yin, X. F. et al. Observation of topologically enabled unidirectional guided resonances. Nature 580, 467â471 (2020).
Hsu, C. W. et al. Bound states in the continuum. Nat. Rev. Mater. 1, 16048 (2016).
Ong, L. L. et al. Programmable self-assembly of three-dimensional nanostructures from 10,000 unique components. Nature 552, 72â77 (2017).
Sun, W. et al. Casting inorganic structures with DNA molds. Science 346, 1258361 (2014).
Verhagen, E. et al. Nanowire plasmon excitation by adiabatic mode transformation. Phys. Rev. Lett. 102, 203904 (2009).
Ding, F. & Bozhevolnyi, S. I. A review of unidirectional surface plasmon polariton metacouplers. IEEE J. Sel. Top. Quantum Electron. 25, 4600611 (2019).
West, P. R. et al. Searching for better plasmonic materials. Laser Photonics Rev. 4, 795â808 (2010).
Haffner, C. et al. Low-loss plasmon-assisted electro-optic modulator. Nature 556, 483â486 (2018).
Wang, Y. et al. Stable, high-performance sodium-based plasmonic devices in the near infrared. Nature 581, 401â405 (2020).
Woessner, A. et al. Highly confined low-loss plasmons in graphene-boron nitride heterostructures. Nat. Mater. 14, 421â425 (2015).
Naik, G. V., Shalaev, V. M. & Boltasseva, A. Alternative plasmonic materials: Beyond gold and silver. Adv. Mater. 25, 3264â3294 (2013).
Boltasseva, A. & Atwater, H. A. Low-loss plasmonic metamaterials. Science 331, 290â291 (2011).
Tahersima, M. H. et al. Deep neural network inverse design of integrated photonic power splitters. Sci. Rep. 9, 1368 (2019).
Melati, D. et al. Mapping the global design space of nanophotonic components using machine learning pattern recognition. Nat. Commun. 10, 4775 (2019).
Qu, Y. R. et al. Migrating knowledge between physical scenarios based on artificial neural networks. ACS Photonics 6, 1168â1174 (2019).
Nanoscale and Quantum Photonics Lab. Inverse design of photonics. https://nqp.stanford.edu/inverse-design-photonics.
Lumerical. Photonic inverse design. https://www.lumerical.com/solutions/inverse-design/.
Piggott, A. Y. et al. Inverse-designed photonics for semiconductor foundries. ACS Photonics 7, 569â575 (2020).
Liao, K. et al. On-chip nanophotonic devices based on dielectric metasurfaces. Acta Opt. Sin. 41, 0823001 (2021).
Kim, Y. et al. Phase modulation with electrically tunable vanadium dioxide phase-change metasurfaces. Nano Lett. 19, 3961â3968 (2019).
Xie, Y. Y. et al. Metasurface-integrated vertical cavity surface-emitting lasers for programmable directional lasing emissions. Nat. Nanotechnol. 15, 125â130 (2020).
Lin, X. et al. All-optical machine learning using diffractive deep neural networks. Science 361, 1004â1008 (2018).
Wetzstein, G. et al. Inference in artificial intelligence with deep optics and photonics. Nature 588, 39â47 (2020).
Colburn, S. et al. Optical frontend for a convolutional neural network. Appl. Opt. 58, 3179â3186 (2019).
Burgos, C. M. V. et al. Design framework for metasurface optics-based convolutional neural networks. Appl. Opt. 60, 4356â4365 (2021).
Georgi, P. et al. Metasurface interferometry toward quantum sensors. Light.: Sci. Appl. 8, 70 (2019).
Stav, T. et al. Quantum entanglement of the spin and orbital angular momentum of photons using metamaterials. Science 361, 1101â1104 (2018).
Ãzdemir, Å. K. et al. Parity-time symmetry and exceptional points in photonics. Nat. Mater. 18, 783â798 (2019).
Guo, X. X. et al. Nonreciprocal metasurface with space-time phase modulation. Light.: Sci. Appl. 8, 123 (2019).
Williamson, I. A. D. et al. Integrated nonreciprocal photonic devices with dynamic modulation. Proc. IEEE 108, 1759â1784 (2020).
Feng, L. et al. Experimental demonstration of a unidirectional reflectionless parity-time metamaterial at optical frequencies. Nat. Mater. 12, 108â113 (2013).
Miao, P. et al. Orbital angular momentum microlaser. Science 353, 464â467 (2016).
Tsakmakidis, K. L. et al. Breaking Lorentz reciprocity to overcome the time-bandwidth limit in physics and engineering. Science 356, 1260â1264 (2017).
Lawrence, M., Barton, D. R. III & Dionne, J. A. Nonreciprocal flat optics with silicon metasurfaces. Nano Lett. 18, 1104â1109 (2018).
Xu, X. Y. et al. 11 TOPS photonic convolutional accelerator for optical neural networks. Nature 589, 44â51 (2021).
Wen, Z. et al. Self-powered textile for wearable electronics by hybridizing fiber-shaped nanogenerators, solar cells, and supercapacitors. Sci. Adv. 2, e1600097 (2016).
Yuan, W. et al. Super-achromatic monolithic microprobe for ultrahigh-resolution endoscopic optical coherence tomography at 800 nm. Nat. Commun. 8, 1531 (2017).
Gao, W. L. et al. Chiral surface waves supported by biaxial hyperbolic metamaterials. Light. Sci. Appl. 4, e328 (2015).
Oulton, R. F. et al. Plasmon lasers at deep subwavelength scale. Nature 461, 629â632 (2009).
Goykhman, I. et al. Locally oxidized silicon surface-plasmon schottky detector for telecom regime. Nano Lett. 11, 2219â2224 (2011).
Ni, G. X. et al. Fundamental limits to graphene plasmonics. Nature 557, 530â533 (2018).
Li, Z. B. et al. Graphene plasmonic metasurfaces to steer infrared light. Sci. Rep. 5, 12423 (2015).
Liu, Z. et al. Largely tunable terahertz circular polarization splitters based on patterned graphene nanoantenna arrays. IEEE. Photon. J. 11, 4501211 (2019).
Correas-Serrano, D. & Gomez-Diaz, J. S. Nonreciprocal and collimated surface plasmons in drift-biased graphene metasurfaces. Phys. Rev. B 100, 081410 (2019).
You, J. W., Lan, Z. H. & Panoiu, N. C. Four-wave mixing of topological edge plasmons in graphene metasurfaces. Sci. Adv. 6, eaaz3910 (2020).
Lee, H. S. et al. Selective amplification of the primary exciton in a MoS2 monolayer. Phys. Rev. Lett. 115, 226801 (2015).
Hu, F. T. et al. Two-plasmon spontaneous emission from a nonlocal epsilon-near-zero material. Commun. Phys. 4, 84 (2021).
Silva, A. et al. Performing mathematical operations with metamaterials. Science 343, 160â163 (2014).
Feldmann, J. et al. Parallel convolutional processing using an integrated photonic tensor core. Nature 589, 52â58 (2021).
Camacho, M., Edwards, B. & Engheta, N. A single inverse-designed photonic structure that performs parallel computing. Nat. Commun. 12, 1466 (2021).
Qu, Y. R. et al. Inverse design of an integrated-nanophotonics optical neural network. Sci. Bull. 65, 1177â1183 (2020).
Papaioannou, M., Plum, E. & Zheludev, N. I. All-optical pattern recognition and image processing on a metamaterial beam splitter. ACS Photonics 4, 217â222 (2017).
Zhou, J. X. et al. Metasurface enabled quantum edge detection. Sci. Adv. 6, eabc4385 (2020).
Wu, Z. C. et al. Neuromorphic metasurface. Photonics Res. 8, 46â50 (2020).
Li, L. L. et al. Intelligent metasurface imager and recognizer. Light. Sci. Appl. 8, 97 (2019).
del Hougne, P. & Lerosey, G. Leveraging chaos for wave-based analog computation: demonstration with indoor wireless communication signals. Phys. Rev. X 8, 041037 (2018).
del Hougne, P. et al. Learned integrated sensing pipeline: reconfigurable metasurface transceivers as trainable physical layer in an artificial neural network. Adv. Sci. 7, 1901913 (2020).
Shen, Y. C. et al. Deep learning with coherent nanophotonic circuits. Nat. Photonics 11, 441â446 (2017).
Wen, X., Xu, K. & Song, Q. H. Design of a barcode-like waveguide nanostructure for efficient chip-fiber coupling. Photonics Res. 4, 209â213 (2016).
Wang, Y. et al. Design of broadband subwavelength grating couplers with low back reflection. Opt. Lett. 40, 4647â4650 (2015).
Slussarenko, S. et al. Guiding light via geometric phases. Nat. Photoincs 10, 571â575 (2016).
Lumer, Y. et al. Light guiding by artificial gauge fields. Nat. Photonics 13, 339â345 (2019).
Miller, D. A. B. Huygensâs wave propagation principle corrected. Opt. Lett. 16, 1370â1372 (1991).
Lalanne, P. et al. Design and fabrication of blazed binary diffractive elements with sampling periods smaller than the structural cutoff. J. Optical Soc. Am. A 16, 1143â1156 (1999).
Smith, D. R. et al. Composite medium with simutaneously negative perme- ability and permittivity. Phys. Rev. Lett. 84, 4184â4187 (2000).
Sapra, N. V. et al. Waveguide-integrated dielectric laser particle accelerators through the inverse design of photonics. In Proceedings of 2019 Conference on Lasers and Electro-Optics (IEEE, 2019).
Yang, K. Y. et al. Inverse-designed multi-dimensional silicon photonic transmitters. Preprint at https://arxiv.org/abs/2103.14139 (2021).
Wu, Q., Turpin, J. P. & Werner, D. H. Integrated photonic systems based on transformation optics enabled gradient index devices. Light.: Sci. Appl. 1, e38 (2012).
Wu, S. L. et al. A compact and polarization-insensitive silicon waveguide crossing based on subwavelength grating MMI couplers. Opt. Express 28, 27268â27276 (2020).
Acknowledgements
The authors would like to thank Prof. Nanfang Yu from Columbia University and Prof. Hong-Bo Sun from Tsinghua University for constructive discussions. Q.X. acknowledges support from National Natural Science Foundation of China (Grants Nos. 62075113, 61675114). S.S. is supported by National Key Research and Development Program of China (Nos. 2020YFA0710101, 2017YFA0303504), National Natural Science Foundation of China (11874118), Natural Science Foundation of Shanghai (18ZR1403400, 20JC1414601), and Fudan University-CIOMP Joint Fund (No. FC2018-008). M.Z. is supported by National Natural Science Foundation of China (61775069, 61635004). J.A.F. is supported by Office of Naval Research (under Award No. N00014-20-1-2105) and ARPA-E (under Award No. DE-AR0001212). Z.X. and X.Y. acknowledge support from National Natural Science Foundation of China (61935013, U1701661, 61975133), the Natural Science Foundation of Guangdong Province (2020A1515011185), and the Science and Technology Innovation Commission of Shenzhen (JCYJ20180507182035270, JCYJ20200109114018750).
Author information
Authors and Affiliations
Contributions
Y.M., Q.X., S.S., and M.Z. initiated the review proposal with Y.D., X.N., Y.C., L.L, Y.Y., and M.G. Y.M. wrote the Introduction and Fundamentals sections with the input from all authors. Y.M. and Y.D. wrote the Dielectric Meta-Waveguides section with inputs from X.N. and Y.Y. Y.M. and A.C. wrote the Meta-Fibers section with inputs from Z.L. and Q.X. Y.C. and S.S. wrote the Plasmonic Meta-Waveguide section. L.L., J.A.F., Q.H., K.W., and M.Z. wrote the Inverse-Designed Meta-Waveguides section with inputs from Z.X., Y.M., and X.Y. All authors contributed to the Summary section.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the articleâs Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the articleâs Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Meng, Y., Chen, Y., Lu, L. et al. Optical meta-waveguides for integrated photonics and beyond. Light Sci Appl 10, 235 (2021). https://doi.org/10.1038/s41377-021-00655-x
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41377-021-00655-x
This article is cited by
-
Diffractive optical computing in free space
Nature Communications (2024)
-
Design and simulation of a compact polarization beam splitter based on dual-core photonic crystal fiber with elliptical gold layer
Scientific Reports (2024)
-
Coherent control of enhanced second-harmonic generation in a plasmonic nanocircuit using a transition metal dichalcogenide monolayer
Nature Communications (2024)
-
Unidirectional guided-wave-driven metasurfaces for arbitrary wavefront control
Nature Communications (2024)
-
Orbital angular momentum-mediated machine learning for high-accuracy mode-feature encoding
Light: Science & Applications (2024)