Direct-write assembly of microperiodic planar and spanning ITO microelectrodes†
Abstract
Printed Sn-doped In2O3 (ITO) microelectrodes are fabricated by direct-write
* Corresponding authors
a
Department of Materials Science and Engineering, University of Illinois at Urbana-Champaign, Urbana, Illinois 61801, USA
E-mail:
jalewis@illinois.edu
Fax: +1 217-333-2736
Tel: +1 217-244-4973
b Frederick Seitz Materials Research Laboratory, University of Illinois at Urbana-Champaign, Urbana, Illinois 61801, USA
c Department of Chemistry and Biomolecular Engineering, University of Illinois at Urbana-Champaign, Urbana, Illinois 61801, USA
Printed Sn-doped In2O3 (ITO) microelectrodes are fabricated by direct-write
B. Y. Ahn, D. J. Lorang, E. B. Duoss and J. A. Lewis, Chem. Commun., 2010, 46, 7118 DOI: 10.1039/C0CC01691H
To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.
If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.
If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.
Read more about how to correctly acknowledge RSC content.
Fetching data from CrossRef.
This may take some time to load.
Loading related content