Abstract
Three-dimensional hollow porous superparamagnetic Fe3O4 microspheres were synthesized via a facile hydrothermal process. A series of characterizations done with X-ray diffraction, Brunauer-Emmett-Teller method, Fourier transform infrared spectroscopy, scanning electron microscopy, and transmission electron microscopy indicated that the production of Fe3O4 microspheres possessed good monodispersity, uniform size distribution, hollow and porous structural characters, and strong superparamagnetic behavior. The obtained Fe3O4 microspheres have a diameter of ca. 300 nm, which is composed of many interconnected nanoparticles with a size of ca. 20 nm. The saturation magnetization is 80.6 emu·g-1. The as-prepared products had promising applications as novel catalysts to remove organic pollutants (methylene blue) from wastewater in the presence of H2O2 and ultrasound irradiation.
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Background
In recent years, porous metal oxides have attracted considerable attention due to their potential applications in the field of lithium-ion batteries[1], drug delivery carrier[2], catalysis (including enzyme mimetics)[3], sensors[4], separation[5], and magnetic resonance imaging[6]. Among the porous metal oxides, iron oxide (Fe3O4) has become a particularly intriguing research target due to its low cost, good biocompatibility, as well as outstanding stability in physiological conditions[7–10]. Despite the great effort that has been made towards the synthesis of porous Fe3O4 with various sizes and morphologies, it still remains a big challenge to develop controlled and efficient ways for the synthesis of porous Fe3O4 microspheres with uniform size and strong magnetic performances in a large scale[11–13]. The hydrothermal method is one of the widely used methods for preparing functional inorganic nanomaterials[14–16]. It has a series of advantages for the resulting products, such as good crystallinity, uniform sizes, and special morphology, followed by excellent properties. Up to now, the Fe3O4 nanomaterials with different sizes and morphologies have been extensively reported by using this method. However, few reports are associated with the synthesis of 3D hollow porous Fe3O4 microsphere structures with uniform sizes on a large scale. Herein, we report a facile hydrothermal method for the construction of 3D hollow porous Fe3O4 microspheres from nanoparticle building blocks. Synthesis systems based on ethylene glycol (EG) and cetyl-methyl-ammonium bromide (CTAB) have been extensively adopted for the preparation of inorganic nanomaterials. In the whole reaction, EG was used as a solvent and CTAB as a dispersant. The as-prepared Fe3O4 microspheres exhibited porous structure, large surface area, strong superparamagnetic characters, as well as peroxidase-like activity, which are used as efficient enzyme mimetics to degrade organic pollutants (methylene blue).
Methods
Synthesis and characterization of 3D hollow porous Fe3O4 microspheres
All chemicals were of analytical grade and used as received without further purification (purchased from Sinopharm Chemical Reagent Co., Ltd., Shanghai, China). Typically, FeCl3 (0.8 g) was added into a beaker containing 40 mL ethylene glycol to become a clean yellow-brown solution at room temperature. Then, NaAc (3.6 g) and CTAB were subsequently added. The mixture solution was stirred vigorously for 10 min and was transferred into a Teflon-lined autoclave and heated to 200°C for 24 h. After cooling down to room temperature, the resulting products were collected and washed with deionized water and ethanol three times. The washed products were dried at 60°C for 1 day.
X-ray diffraction (XRD) patterns of the samples were recorded using a Bruker AXS micro-diffractometer (D8 ADVANCE; Bruker AXS GmbH, Karlsruhe, Germany) with Cu-Kα radiation (λ = 1.5406 Å) from 10° to 80° at a scanning speed of 0.33° min-1. The surface chemical groups of Fe3O4 microspheres were recorded by Fourier transform infrared spectroscopy (FTIR; Bruker Vector-22 FTIR spectrometer). The pore sizes and distribution curves were derived from the adsorption isotherm by employing the Barrett-Joyner-Halenda (BJH) method, and the surface areas were calculated through the Brunauer-Emmett-Teller (BET) equation. The magnetization versus magnetic field curves were measured at 300 K by a vibrating sample magnetometer (VSM; PPMS-9 T (EC-II), Quantum Design, San Diego, CA, USA). The surface morphology and structure were observed using a field emission scanning electron microscope (FESEM; Carl Zeiss AG, Oberkochen, Germany) operated at an accelerating voltage of 5.0 kV and a transmission electron microscope (TEM; JEM-2010, JEOL, Tokyo, Japan).
Catalytic degradation of methylene blue
Methylene blue was employed as a model dye pollutant to evaluate the catalytic activity of 3D porous Fe3O4 microspheres for the activation of H2O2 under ultrasonic irradiation. Briefly, 0.5 mL of Fe3O4 microsphere stock solution (with different concentrations) was added into 10 mL aqueous solution of methylene blue (2 μg/mL) at pH 5.0. The mixed solution was put for 10 min to achieve adsorption-desorption equilibrium. Then, the degradation was done by rapidly adding H2O2 (with different concentrations) and was carried out with ultrasonic irradiation for 3 min. The solution was reacted for 20 min. Lastly, the Fe3O4 microspheres were collected using a magnet. The concentration of methylene blue in the clear solution was determined by measuring the absorbance of the solution at 662 nm on a UV-vis spectrophotometer (UV-2450, Shimadzu Co., Kyoto, Japan).
Results and discussion
The chemical composition and phase purity of the resulting product was determined by XRD. As shown in Figure 1a, all the diffraction peaks can be assigned to the Fe3O4 phase (JCPDS card no. 65-3107). No other impurities are observed. The strongest diffraction peak (311) was used to estimate the crystalline size. According to the Debye-Scherrer formula, the calculated crystalline size is about 23 nm, which is consistent with the average grain sizes as observed in the following SEM images. The BET method of nitrogen adsorption/desorption was further employed to reveal the surface area and pore distribution of the as-obtained Fe3O4 products. The N2 adsorption-desorption isotherm and pore size distribution curve of the sample are shown in Figure 1b. The sample is a typical IV isotherm with a type-H3 hysteresis; there are two-level broad pore size distributions in the range of 3 to 5 nm and 40 to 100 nm (inset). In addition, the specific surface area of the Fe3O4 sample calculated by BET method is 148 m2 g-1. Such high surface area might be due to the existence of a hollow internal structure, which is confirmed by subsequent TEM observation.
The morphology of the sample was subsequently examined using both SEM and TEM. From Figure 2a, one can see that the as-obtained products were spherical in morphology, and the particles are highly dispersed. The average size of these particles is ca. 300 nm. From the SEM image with the higher magnification in Figure 2b, the surface morphology was clearly revealed. The individual Fe3O4 microsphere is composed of lots of interconnected nanoparticles with a size of ca. 20 nm. Many void spaces could be observed between nanoparticles, making the whole microsphere a porous structure. From a broken microsphere, it could also be clearly seen that the microsphere is hollow and composed of densely packed subunits. The hollow interior is further confirmed by TEM images. Figure 2c is the TEM image of Fe3O4 microspheres. The clear variation in contrast shows that the as-prepared F3O4 microsphere is hollow and has a porous structure. Meanwhile, the higher magnification of an individual microsphere (Figure 2d) indicated that a great number of particles connected to each other to form a 3D hollow porous structure, which is consistent with the SEM observation.
Figure 3a shows the magnetic curves of the prepared 3D hollow porous Fe3O4 microspheres. It does not show any hysteresis, revealing that the 3D hollow porous Fe3O4 microsphere has a typical superparamagnetic behavior. The saturation magnetization reaches up to 80.6 emu·g-1, which is higher than the PEG additive-synthesized Fe3O4 microspheres. The strong magnetic performances would be helpful to the removal of heavy metal ions or organic pollutant in waste water. To determine the surface chemical compositions, FTIR measurement was performed in the range of 400 to 4,000 cm-1. As shown in Figure 3b, the peak at 3,453 cm-1 was assigned to the -OH stretch. The peaks at 605 and 448 cm-1 can be assigned to the vibrations of Fe-O. Other characteristic peaks at 1,638, 1,402, and 1,045 cm-1 were due to the CTAB molecules. The results showed that the 3D hollow porous microspheres were coated by a layer of CTAB molecules.
Based on the above results, a possible formation mechanism of the 3D hollow porous microspheres was put forward as follows: The ethylene glycol acts as both a solvent and a reducer during the solvothermal process. On one hand, it can afford -OH groups to coordinate with Fe3+. With the changes of pH (the addition of NaAc), high temperature, as well as high pressure, the Fe3O4 nuclei are generated; they quickly grow up to become small nanoparticles and aggregate to form the microspheres, owing to the high surface energy. With a longer reaction time, the microspheres continue to grow up and finally form the hollow porous structure, probably owing to the Ostwald ripening. The addition of CTAB is used to control and disperse the resulting products. In fact, the detailed mechanism is rather complex and remains a further discussion to materials chemists.
The treatment of organic dyes in wastewater is a challenging task in industries. Considering the unique structure and large surface area of Fe3O4 microspheres, it is expected that a strong affinity to organic molecules can be achieved by using these Fe3O4 microspheres as sorbent material[17–21]. Furthermore, a recent research has shown that Fe3O4 magnetic nanoparticles have a peroxidase-like activity[3, 17]. In the presence of H2O2, Fe3O4 nanoparticles could efficiently do catalytic oxidation of organic dyes via the well-known Fenton reaction[22]. To assess the catalytic ability of the 3D hollow porous Fe3O4 microspheres to the activation of H2O2, herein, methylene blue is chosen as the model compound of organic pollutants, which is a widely used staining agent. Figure 4a shows the influence of 3D hollow porous Fe3O4 concentrations on the degradation rates of methylene blue in the presence of H2O2 (certain concentration). One can see that the removal efficiency of methylene blue increases followed by the increase of Fe3O4 concentrations (reaction time is 30 min). When the concentration of Fe3O4 reaches up to 600 mg/L, the removal efficiency of organic dyes approaches 90%. With the continuous rise of the concentration of Fe3O4 microspheres, the removal efficiency has no obvious changes, indicating that a saturation state is completed. Therefore, 600 mg/mL is applied as the optimal concentration for methylene blue clearance. On the other hand, the concentration of H2O2 has also influenced the removal efficiency of methylene blue. In the absence of H2O2, methylene blue is partly removed (about 10%), indicating that 3D hollow porous Fe3O4 microspheres can adsorb organic pollutants. In the presence of H2O2 with different concentrations, the removal efficiency was obviously enhanced, as shown in Figure 4b. When the concentration of H2O2 is 0.6 mol/L, the removal efficiency of methylene blue reaches the maximum (near 90%). Accordingly, an optimal concentration of H2O2 at 0.6 mol/L was recommended for practical use.
Removal efficiency of methylene blue. (a) Effect of the concentration of 3D hollow porous Fe3O4 microspheres on the removal efficiency of methylene blue (2 μg/mL) in the presence of H2O2 (0.4 M) and ultrasound irradiation, pH = 5.0. (b) Effect of the concentration of H2O2 on the removal efficiency of methylene blue (2 μg/mL) in the presence of 3D hollow porous Fe3O4 microspheres (2 μg/mL), pH = 5.0.
Based on the above results, a possible catalytic mechanism of 3D hollow porous Fe3O4 as the peroxidase mimetic is proposed as follows: due to the large surface and unique structures, H2O2 and methylene blue molecules can be adsorbed onto the surface of 3D hollow porous Fe3O4 microspheres. Under the influence of ultrasound irradiation, H2O2 molecules are activated by the bound Fe2+ and Fe3+ of Fe3O4 microspheres to generate reactive oxygen species (including · OH, O2-˙, HO2˙). These radicals can further attack organic pollutants to degrade them.
Conclusions
In summary, we have developed a simple one-pot hydrothermal procedure for the synthesis of 3D hollow porous Fe3O4 microspheres composed of lots of nanoparticles assembled on a large scale. The as-prepared microspheres have good dispersibility, large BET surface, strong superparamagnetic performance, as well as peroxidase-like activity, which can be used as a kind of adsorbent and catalytic materials for the removal of organic pollutants. We believe that the easy preparation method, the large-scale output, the unique structure, as well as the outstanding performances endow these 3D microspheres many promising applications ranging from biomedicine to energy materials as well as environmental remediation.
References
Zhu J, Ng K-Y-S, Deng D: Hollow cocoon-like hematite mesoparticles of nanoparticle aggregates: structural evolution and superior performances in lithium ion batteries. ACS Appl Mater Interfaces 2014, 6(4):2996–3001. 10.1021/am4055996
Zhu X-M, Yuan J, Leung KC-F, Lee S-F, Sham KWY, Cheng CHK, Au DWT, Teng G-J, Ahuja AT, Wang Y-XJ: Hollow superparamagnetic iron oxide nanoshells as a hydrophobic anticancer drug carrier: intracellular pH-dependent drug release and enhanced cytotoxicity. Nanoscale 2012, 4(18):5744–5754. 10.1039/c2nr30960b
Gao L, Zhuang J, Nie L, Zhang J, Zhang Y, Gu N, Wang T, Feng J, Yang D, Perrett S, Yan X: Intrinsic peroxidase-like activity of ferromagnetic nanoparticles. Nat Nanotechnol 2007, 2(9):577–583. 10.1038/nnano.2007.260
Zhang X, Zheng C, Guo S, Li J, Yan H, Chen G: Turn-on fluorescence sensor for intracellular imaging of glutathione using g-C3N4 nanosheet-MnO2 sandwich nanocomposite. Anal Chem 2014, 86(7):3426–3434. 10.1021/ac500336f
Zhong L, Hu J, Liang H, Cao A, Song W, Wan L: Self-assembled 3D flowerlike iron oxide nanostructures and their application in water treatment. Adv Mater 2006, 18(18):2426–2431. 10.1002/adma.200600504
Wang G, Zhang X, Skallberg A, Liu Y, Hu Z, Mei X, Uvdal K: One-step synthesis of water-dispersible ultra-small Fe3O4 nanoparticles as contrast agents for T1 and T2 magnetic resonance imaging. Nanoscale 2014, 6: 2953–2960. 10.1039/c3nr05550g
Cheng K, Peng S, Xu C, Sun S: Porous hollow Fe3O4 nanoparticles for targeted delivery and controlled release of cisplatin. J Am Chem Soc 2009, 131(30):10637–10644. 10.1021/ja903300f
Gao G, Qiu P, Qian Q, Zhou N, Wang K, Song H, Fu H, Cui D: PEG-200-assisted hydrothermal method for the controlled-synthesis of highly dispersed hollow Fe3O4 nanoparticles. J Alloy Compd 2013, 574: 340–344.
Yang DP, Gao F, Cui DX, Yang M: Microwave rapid synthesis of nanoporous Fe3O4 magnetic microspheres. Curr Nanosci 2009, 5(4):485–488. 10.2174/157341309789378050
Wang B, Wu H-B, Zhang L, Lou X-W-D: Self-supported construction of uniform Fe3O4 hollow microspheres from nanoplate building blocks. Angew Chem Int Ed 2013, 52(15):4165–4168. 10.1002/anie.201300190
Li D, Qin Q, Duan XC, Yang JQ, Guo W, Zheng WJ: General one-pot template-free hydrothermal method to metal oxide hollow spheres and their photocatalytic activities and lithium storage properties. ACS Appl Mater Interfaces 2013, 5(18):9095–9100. 10.1021/am4024059
Liu Z, Wang HS, Li B, Liu C, Jiang YJ, Yu G, Mu XD: Biocompatible magnetic cellulose-chitosan hybrid gel microspheres reconstituted from ionic liquids for enzyme immobilization. J Mater Chem 2012, 22: 15085–15091. 10.1039/c2jm33033d
Luo X, Zhang L: Immobilization of penicillin G acylase in epoxy-activated magnetic cellulose microspheres for improvement of biocatalytic stability and activities. Biomacromolecules 2010, 11(11):2896–2903. 10.1021/bm100642y
Titirici M, Antonietti M, Thomas A: A generalized synthesis of metal oxide hollow spheres using a hydrothermal approach. Chem Mater 2006, 18(16):3808–3812. 10.1021/cm052768u
Gao G, Wu H, Gao W, Zhang Y, Huang P, Cui D: Preparation of FeCO3-Fe3O4 nanoparticles and flower-like assemblies via a one-step hydrothermal method. CrystEngComm 2011, 13: 6950–6954. 10.1039/c1ce05994g
Lin M, Huang H, Liu Z, Liu Y, Ge J, Fang Y: Growth–dissolution–regrowth transitions of Fe3O4 nanoparticles as building blocks for 3D magnetic nanoparticle clusters under hydrothermal conditions. Langmuir 2013, 29(49):15433–15441. 10.1021/la403577y
Luo W, Zhu L, Wang N, Tang H, Cao M, She Y: Efficient removal of organic pollutants with magnetic nanoscaled BiFeO3 as a reusable heterogeneous Fenton-like catalyst. Environ Sci Technol 2010, 44(5):1786–1791. 10.1021/es903390g
Kong L, Gan X, Ahmad A-L-B, Hamed B-H, Evarts E-R, Ooi B, Lim J: Design and synthesis of magnetic nanoparticles augmented microcapsule with catalytic and magnetic bifunctionalities for dye removal. Chem Eng J 2012, 197: 350–358.
Xie Y, Yan B, Xu H, Chen J, Liu Q, Deng Y, Zeng H: Highly regenerable mussel-inspired Fe3O4@polydopamine-Ag core–shell microspheres as catalyst and adsorbent for methylene blue removal. ACS Appl Mater Interfaces 2014, 6(11):8845–8852. 10.1021/am501632f
Zhang S, Zhang Y, Bi G, Liu J, Wang Z, Xu Q, Xu H, Li X: Mussel-inspired polydopamine biopolymer decorated with magnetic nanoparticles for multiple pollutants removal. J Hazard Mater 2014, 270(15):27–34.
Jung Y, Son Y, Lee J: 3-D self-assembly of flower-like particles via microwave irradiation for water treatment. RSC Adv 2012, 2(13):5877–5844. 10.1039/c2ra20500a
Toda K, Tanaka T, Tsuda Y, Ban M, Koveke EP, Koinuma M, Ohira SI: Sulfurized limonite as material for fast decomposition of organic compounds by heterogeneous Fenton reaction. J Hazard Mater 2014, 278(15):426–432.
Acknowledgements
This work was supported by the National Natural Science Foundation of China (NSFC Project Nos. 81472001, 31400851, 21106117, and 21036004).
Author information
Authors and Affiliations
Corresponding authors
Additional information
Competing interests
The authors declare that they have no competing interests.
Authors’ contributions
XW and JH conceived the study and designed the experiments. XW and YL performed the experiments. XW, YL, GL, and HH analyzed the data. JH and DPY contributed the materials and analysis tools. DPY wrote the manuscript. All authors read and approved the final manuscript.
Authors’ original submitted files for images
Below are the links to the authors’ original submitted files for images.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.
The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.
To view a copy of this licence, visit https://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Wang, X., Huang, H., Li, G. et al. Hydrothermal synthesis of 3D hollow porous Fe3O4 microspheres towards catalytic removal of organic pollutants. Nanoscale Res Lett 9, 648 (2014). https://doi.org/10.1186/1556-276X-9-648
Received:
Accepted:
Published:
DOI: https://doi.org/10.1186/1556-276X-9-648