and Applied Mechanics
56, 4, pp. 939-949, Warsaw 2018
DOI: 10.15632/jtam-pl.56.4.939
Low-velocity impact behaviour of open-cell foams
in other natural or human-made materials. While the impact characteristics of closed-cell
foams under static and impact loadings appear to be well-studied in the literature, the impact
behaviour of open-cell foams is not yet well-understood. In this study, open-cell foams with
two different densities are impacted by drop weights with different kinetic energies. The
effects of foam density, impactor initial height, and impactor weight on the recorded stresstime,
stress-strain, and energy-strain curves are investigated. While the stress-strain curve
of closed-cell foams under impact loading usually consists of a single bell, the results of
the current study showed that both the stress-time and stress-strain curves of most the
samples consist of two consecutive bells. By increasing weight of the impacting weight,
the number of bells increases which helps in increasing the impact period and keeping the
maximum generated stress low. Compared to closed-cell foams, the open-cell foams can
therefore better absorb the energy, as long as the impact energy is relatively small. The
relatively low stiffness as well as the presence of large hollow space inside the open-cell
foams also makes them favorable for being used as biomedical scaffolds.
References
Ahmadi S., Campoli G., Amin Yavari S., Sajadi B., Wauthl´e R., Schrooten J., Weinans
H., Zadpoor A.A., 2014, Mechanical behavior of regular open-cell porous biomaterials made of
diamond lattice unit cells, Journal of the Mechanical Behavior of Biomedical Materials, 34, 106-115
Amin Yavari S., Wauthlé R., van der Stok J., Riemslag A., Janssen M., Mulier M.,
Kruth J.-P., Schrooten J., Weinans H., Zadpoor A.A., 2013, Fatigue behavior of porous
biomaterials manufactured using selective laser melting, Materials Science and Engineering: C, 33, 8, 4849-4858
Babaee S., Jahromi B.H., Ajdari A., Nayeb-Hashemi H., Vaziri A., 2012, Mechanical
properties of open-cell rhombic dodecahedron cellular structures, Acta Materialia, 60, 6, 2873-2885
Borleffs M., 2012, Finite Element Modeling to Predict Bulk Mechanical Properties of 3D Printed
Metal Foams, Delft University of Technology
Campoli G., Borleffs M., Amin Yavari S., Wauthle R., Weinans H., Zadpoor A.A., 2013, Mechanical properties of open-cell metallic biomaterials manufactured using additive manufacturing,
Materials and Design, 49, 957-965
Castro G., Nutt S., Wenchen X., 2013, Compression and low-velocity impact behavior of
aluminum syntactic foam, Materials Science and Engineering: A, 578, 222-229
Doig S., Boam A., Livingston A., Stuckey D., 1999, Mass transfer of hydrophobic solutes in
solvent swollen silicone rubber membranes, Journal of Membrane Science, 154, 1, 127-140
Fang Q., Zhang J., Zhang Y., Liu J., Gong Z., 2015, Mesoscopic investigation of closed-cell
aluminum foams on energy absorption capability under impact, Composite Structures, 124, 409-420
Gibson L.J., Ashby M.F., 1997, Cellular Solids: Structure and Properties, Cambridge University
Press
Hedayati R., Ahmadi S., Lietaert K., Pouran B., Li Y., Weinans H., Rans C., Zadpoor
A., 2018, Isolated and modulated effects of topology and material type on the mechanical properties
of additively manufactured porous biomaterials, Journal of the Mechanical Behavior of Biomedical
Materials, 79
Hedayati R., Leeflang A., Zadpoor A., 2017, Additively manufactured metallic pentamode
meta-materials, Applied Physics Letters, 110, 9, 091905
Hedayati R., Sadighi M., Mohammadi-Aghdam M., Zadpoor A.A., 2016a, Mechanics of
additively manufactured porous biomaterials based on the rhombicuboctahedron unit cell, Journal
of the Mechanical Behavior of Biomedical Materials, 53, 272-294
Hedayati R., Sadighi M., Mohammadi-Aghdam M., Zadpoor A.A., 2016b, Mechanical properties
of additively manufactured octagonal honeycombs, Materials Science and Engineering: C, 69, 1307-1317
Hedayati R., Sadighi M., Mohammadi-Aghdam M., Zadpoor A.A., 2016c, Mechanical properties
of additively manufactured thick honeycombs, Materials, 9, 8, 613
Hedayati R., Ziaei-Rad S., 2011, Foam-core effect on the integrity of tailplane leading edge
during bird-strike event, Journal of Aircraft, 48, 6, 2080-2089
Jiang B., Wang Z., Zhao N., 2007, Effect of pore size and relative density on the mechanical
properties of open cell aluminum foams, Scripta Materialia, 56, 2, 169-172
Kanahashi H., Mukai T., Yamada Y., Shimojima K., Mabuchi M., Nieh T., Higashi
K., 2000, Dynamic compression of an ultra-low density aluminum foam, Materials Science and
Engineering: A, 280, 2, 349-353
Kashef S., Lin J., Hodgson P.D., Yan W., 2008, Mechanical properties of titanium foam for
biomedical applications, International Journal of Modern Physics B, 22, 31-32, 6155-6160
Kashef S., Asgari A., Hilditch T.B., Yan W., Goel V.K., Hodgson P.D., 2010, Fracture
toughness of titanium foams for medical applications, Materials Science and Engineering: A, 527, 29, 7689-7693
Kashef S., Asgari A., Hilditch T.B., Yan W., Goel V.K., Hodgson P.D., 2011, Fatigue
crack growth behavior of titanium foams for medical applications, Materials Science and Engineering:
A, 528, 3, 1602-1607
Li B., Zhao G., Lu T., 2012, Low strain rate compressive behavior of high porosity closed-cell
aluminum foams, Science China Technological Sciences, 55, 2, 451-463
Mukai T., Miyoshi T., Nakano S., Somekawa H., Higashi K., 2006, Compressive response
of a closed-cell aluminum foam at high strain rate, Scripta Materialia, 54, 4, 533-537
Nieh T., Higashi K., Wadsworth J., 2000, Effect of cell morphology on the compressive properties
of open-cell aluminum foams, Materials Science and Engineering: A, 283, 1, 105-110
Peroni M., Solomos G., Pizzinato V., 2013, Impact behaviour testing of aluminium foam,
International Journal of Impact Engineering, 53, 74-83
Rajendran R., Moorthi A., Basu S., 2009, Numerical simulation of drop weight impact behaviour
of closed cell aluminium foam, Materials and Design, 30, 8, 2823-2830
Ramachandra S., Kumar P.S., Ramamurty U., 2003, Impact energy absorption in an Al foam
at low velocities, Scripta Materialia, 49, 8, 741-745
Sch¨uler P., Fischer S.F., B¨uhrig-Polaczek A., Fleck C., 2013, Deformation and failure
behaviour of open cell Al foams under quasistatic and impact loading, Materials Science and
Engineering: A, 587, 250-261
Shulmeister V., van der Burg M., van der Giessen E., Marissen R., 1998, A numerical
study of large deformations of low-density elastomeric open-cell foams, Mechanics of Materials, 30, 2, 125-140
Wang P., Xu S., Li Z., Yang J., Zhang C., Zheng H., Hu S., 2015, Experimental investigation
on the strain-rate effect and inertia effect of closed-cell aluminum foam subjected to dynamic
loading, Materials Science and Engineering: A, 620, 253-261
Wang Z., Ma H., Zhao L., Yang G., 2006, Studies on the dynamic compressive properties of
open-cell aluminum alloy foams, Scripta Materialia, 54, 1, 83-87
Warren W., Kraynik A., 1997, Linear elastic behavior of a low-density Kelvin foam with open
cells, Journal of Applied Mechanics, 64, 4, 787-794
Weaire D., Phelan R., 1994, A counter-example to Kelvin’s conjecture on minimal surfaces,
Philosophical Magazine Letters, 69, 2, 107-110
Yamada Y., Shimojima K., Sakaguchi Y., Mabuchi M., Nakamura M., Asahina T.,
Mukai T., Kanahashi H., Higashi K., 2000, Effects of heat treatment on compressive properties
of AZ91 Mg and SG91A Al foams with open-cell structure, Materials Science and Engineering: A, 280, 1, 225-228
Yi F., Zhu Z., Zu F., Hu S., Yi P., 2001, Strain rate effects on the compressive property and
the energy-absorbing capacity of aluminum alloy foams, Materials Characterization, 47, 5, 417-422
Zhang Y., Sun G., Xu X., Li G., Huang X., Shen J., Li Q., 2013, Identification of material
parameters for aluminum foam at high strain rate, Computational Materials Science, 74, 65-74
Zheng X., Lee H., Weisgraber T.H., Shusteff M., DeOtte J., Duoss E.B., Kuntz
J.D., Biener M.M., Ge Q., Jackson J.A., 2014, Ultralight, ultrastiff mechanical metamaterials,
Science, 344, 6190, 1373-1377