Abstract
Current methods for measuring hardness and modulus from nanoindentation load-displacement data are based on Sneddon’s equations for the indentation of an elastic half-space by an axially symmetric rigid punch. Recent experiments have shown that nanoindentation unloading data are distinctly curved in a manner which is not consistent with either the flat punch or the conical indenter geometries frequently used in modeling, but are more closely approximated by a parabola of revolution. Finite element simulations for conical indentation of an elastic-plastic material are presented which corroborate the experimental observations, and from which a simple explanation for the shape of the unloading curve is derived. The explanation is based on the concept of an effective indenter shape whose geometry is determined by the shape of the plastic hardness impression formed during indentation.
Similar content being viewed by others
References
I. N. Sneddon, Int. J. Engng. Sci. 3, 47 (1965).
M.F. Doerner and W.D. Nix, J. Mater. Res. 1, 601 (1986).
W.C. Oliver and G.M. Pharr, J. Mater. Res. 7, 1564 (1992).
G.M. Pharr, T.Y. Tsui, A. Bolshakov, and W.C. Oliver, Materials Research Society Symposium Proceedings 338, 127 (1994).
A. Bolshakov, W.C. Oliver, and G.M. Pharr, in preparation for submission to J. Mater. Res.
T.Y. Tsui, W.C. Oliver, and G.M. Pharr, in preparation for submission to J. Mater. Res.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Bolshakov, A., Oliver, W.C. & Pharr, G.M. An Explanation for the Shape of Nanoindentation Unloading Curves based on Finite Element Simulation. MRS Online Proceedings Library 356, 675–680 (1994). https://doi.org/10.1557/PROC-356-675
Published:
Issue Date:
DOI: https://doi.org/10.1557/PROC-356-675