This paper describes the development of the 2004 Canadian Standards Association (CSA) A23.3 shear... more This paper describes the development of the 2004 Canadian Standards Association (CSA) A23.3 shear design provisions for reinforced and prestressed concrete structures. These methods are similar to the 1994 standard in providing a simplified and general shear design method. They differ from previous standards by providing a direct link between these two methods and simple equations for the calculation of β and θ used in the general method rather than providing these values in a table. The paper explains the basic assumptions behind the new shear provisions, provides a derivation of the new equations, and compares designs made with the new equations to designs obtained from previous standards. In general, the new shear provisions require slightly less shear reinforcement than that required by the previous standard. The new general method is significantly easier to use, particularly with spreadsheets. Résumé : Cet article décrit le développement des dispositions de la norme CSA A23.3 2004 quant à la conception anticisaillement des structures en béton armé et précontraint. Ces méthodes sont similaires à celles de la norme 1994 en ce qu'elles fournissent une méthode de conception anticisaillement simplifiée et générale. Elles diffèrent cependant de celles des normes antérieures en fournissant un lien direct entre ces deux méthodes et en fournissant des équations simples pour le calcul de β et de θ utilisés dans la méthode générale plutôt que de fournir ces valeurs dans un tableau. L'article explique les hypothèses à la base de ces nouvelles dispositions anticisaillement, fournit une dérivée des nouvelles équations et compare les conceptions réalisées en utilisant les nouvelles équations aux conceptions obtenues en se servant des normes antérieures. Règle générale, les nouvelles dispositions anticisaillement exigent légèrement moins de renforcement anticisaillement que ce qui est requis par l'ancienne norme. La nouvelle méthode générale est beaucoup plus simple à utiliser, particulièrement avec des tableurs.
This paper describes the development of the 2004 Canadian Standards Association (CSA) A23.3 shear... more This paper describes the development of the 2004 Canadian Standards Association (CSA) A23.3 shear design provisions for reinforced and prestressed concrete structures. These methods are similar to the 1994 standard in providing a simplified and general shear design method. They differ from previous standards by providing a direct link between these two methods and simple equations for the calculation of β and θ used in the general method rather than providing these values in a table. The paper explains the basic assumptions behind the new shear provisions, provides a derivation of the new equations, and compares designs made with the new equations to designs obtained from previous standards. In general, the new shear provisions require slightly less shear reinforcement than that required by the previous standard. The new general method is significantly easier to use, particularly with spreadsheets. Résumé : Cet article décrit le développement des dispositions de la norme CSA A23.3 2004 quant à la conception anticisaillement des structures en béton armé et précontraint. Ces méthodes sont similaires à celles de la norme 1994 en ce qu'elles fournissent une méthode de conception anticisaillement simplifiée et générale. Elles diffèrent cependant de celles des normes antérieures en fournissant un lien direct entre ces deux méthodes et en fournissant des équations simples pour le calcul de β et de θ utilisés dans la méthode générale plutôt que de fournir ces valeurs dans un tableau. L'article explique les hypothèses à la base de ces nouvelles dispositions anticisaillement, fournit une dérivée des nouvelles équations et compare les conceptions réalisées en utilisant les nouvelles équations aux conceptions obtenues en se servant des normes antérieures. Règle générale, les nouvelles dispositions anticisaillement exigent légèrement moins de renforcement anticisaillement que ce qui est requis par l'ancienne norme. La nouvelle méthode générale est beaucoup plus simple à utiliser, particulièrement avec des tableurs.
Uploads
Papers by li qe