materials surfacesとは 意味・読み方・使い方

Further, the surfaces of such bioactive material particles are coated with film materials.例文帳に追加

更に、その生物活性物質粒子の表面を被膜材料で被覆する。 - 特許庁

By receiving influence of the recessed parts existing on the surfaces of the tape base materials 31, the recessed parts corresponding to the positions of the recessed parts of the tape base materials 31 are respectively generated even on the surfaces of the adhesive material layers 32 imparted on the surfaces of the tape base materials 31.例文帳に追加

このテープ基材３１の表面の存在する凹部の影響により、テープ基材３１の表面に付与されている粘着材層３２の表面にも、テープ基材３１の凹部の位置に対応して凹部がそれぞれ生じている。 - 特許庁

When the impervious layer is constructed, the walls of the caissons and the surfaces of rubber materials are coated previously with a primer displaying an affinity among the walls and the surfaces of the rubber materials and the impervious material, and the walls of the caissons and the surfaces of the rubber materials are protected so that openings are not formed at connecting sections.例文帳に追加

前記遮水層を構築するに際して、ケーソンの壁とゴム材の表面には、遮水材との間で親和性を発揮可能なプライマーを塗布しておき、接続部に隙間が生じないように保護する。 - 特許庁

A heat-insulating material 6 is introduced to the upper sections of both surfaces and set up to a lower section as a ventilating layer 7, and upper groove face materials 8 and lower groove face materials are stuck on the upper groove surfaces and lower groove surfaces of both surfaces and the roof three-face panel is manufactured.例文帳に追加

両面の上部に断熱材６を入れて下部に通気層７として取り付けて、その後に両面の上溝面と下溝面に上溝面材８と下溝面材を張り付け屋根３面パネルを得る。 - 特許庁

A double sided adhesive tape is stuck on the surfaces of the core materials 1, and the needle materials 3 are nipped by the core materials 1 and arranged in a helix shape.例文帳に追加

芯材１の表面には両面粘着テープが貼り付けられ、針材３は、各芯材１に挟み込まれて、螺旋状に並べられる。 - 特許庁

This joint structure of the FRP belt for the structure comprises end parts 2 and 2 of belt materials 1 oppositely butt-joined with each other on the same plane, stacking materials 3 and 3 covering their upper/lower surfaces, lower cover materials 4 and 4 covering their upper/lower surfaces, and upper cover materials 5 and 5 covering their upper/lower surfaces.例文帳に追加

同一平面上に対向して突き合わせたベルト材１の端部２、２と、その上下面を覆う重ね材３、３と、さらにその上下面を覆う下カバ−材４、４と、その上下面を覆う上カバ−材５、５とからなる構造用ＦＲＰベルトの継手構造。 - 特許庁

Core materials 3, 3, 3, 3, are framed and one surfaces of the core materials are covered with face materials 5, 6 in the wall panel 1, and beltlike resilient sections 7 are installed to parts of the face materials 5, 6 in place of the face materials.例文帳に追加

芯材３，３，３，３を枠組みしてその少なくとも一面を面材５，６で覆うようにした壁パネル１であって、面材５，６の一部に面材に代えて帯状の弾力部７が設けられている。 - 特許庁

The unevenness is formed in the outer surfaces of the core molds and transferred to the winding layer inner surfaces of the molding materials during the winding and moving of the molding materials, so that the unevenness is formed in the inner surfaces.例文帳に追加

その芯型外周面には凹凸が形成されており、成形材料の巻回移動時にその凹凸が成形材料の巻回層内面に転写されて、その内面に凹凸が形成される。 - 特許庁