rc beamsとは 意味・読み方・使い方

RC rod-like dampers 21 also serving as connecting members are installed in a form similar to the intermediate beams between RC columns 2 constituting the seismic response controlled bridge pier 1.例文帳に追加

制震橋脚１を構成するＲＣ柱２間に連結部材を兼ねたＲＣ棒状ダンパー２１を、中間梁と同様の形態で設置する。 - 特許庁

The mutual connections of the H-type steel beams are so made that an x-direction connects the L-type steels 5 and 5a with reinforcing plates 3 and that a y-direction connects end plates 4 and 4a of the inserted ends in the RC column of the H-type steel beams with reinforcing plates 3a to form uneven crosses of the reinforcing plates 3 and 3a.例文帳に追加

Ｈ型鋼梁の相互の結合は、ｘ方向は四方枠のＬ型鋼５、５ａを補強プレート３で連結して、ｙ方向は、Ｈ型鋼梁のＲＣ柱挿入端部のエンドプレート４と４ａを、補強プレート３ａで連結して補強プレート３と３ａで段違い十文字を形成する。 - 特許庁

The seismic cores 1, 4, 6 of the reinforced concrete wall construction are arranged in the vicinity of the gravity center of the first floor and unified RC footing beams 2, 3, and a dirt floor slab 4 and constructed.例文帳に追加

壁式鉄筋コンクリート造の耐震コア１，４，６を、１階重心附近に配置し、鉄筋コンクリート造の地中梁２，３及び土間スラブ４と、一体化し施工する。 - 特許庁

Reinforced structural bodies 11a and 11b are loaded to the existing RC constructed beams 10a and 10b required to connect a viscoelastic wall A to them, and steel plates 3a and 3b of the viscoelastic wall A are connected to the reinforced structural bodies 11a and 11b.例文帳に追加

粘弾性壁Ａを接合するべき既存のＲＣ造の梁１０ａ，１０ｂに補強構造体１１ａ，１１ｂを装着し、それら補強構造体に対して粘弾性壁の各鋼板３ａ，３ｂを接合する。 - 特許庁

Vertical surfaces of L-type steels 5 and 5a forming a square frame are internally in contact with a column main reinforcement, and horizontal surfaces are fixed to vertical flanges 1 of the inserted ends in an RC column of H-type steel beams B, Ba, C and Ca.例文帳に追加

四方枠を形成するＬ型鋼５、５ａの垂直面は柱主筋と内接し、水平面はＨ型鋼梁Ｂ、Ｂａ、Ｃ、ＣａのＲＣ柱に挿入端部の上下フランジ１と固着する。 - 特許庁

In Step S5, phase difference detection circuits 5a, 5b, 5c are operated to detect the phase differences between the laser light beams La, Lb, Lc and reflected light components Ra, Rb, Rc, and then on the basis of each phase difference, each distance is calculated (Step S6).例文帳に追加

そしてステップＳ５においては、位相差検出回路５ａ、５ｂ、５ｃを動作させて、レーザー光Ｌａ、Ｌｂ、Ｌｃと反射光成分Ｒａ、Ｒｂ、Ｒｃとの位相差を検出し、各位相差に基づき、各距離を算出する（ステップＳ６）。 - 特許庁